X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fstaging%2Fwlan-ng%2Fp80211netdev.c;fp=kernel%2Fdrivers%2Fstaging%2Fwlan-ng%2Fp80211netdev.c;h=a9c1e0bafa62badc12221ba92b90b7e75a178605;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/staging/wlan-ng/p80211netdev.c b/kernel/drivers/staging/wlan-ng/p80211netdev.c new file mode 100644 index 000000000..a9c1e0baf --- /dev/null +++ b/kernel/drivers/staging/wlan-ng/p80211netdev.c @@ -0,0 +1,1085 @@ +/* src/p80211/p80211knetdev.c +* +* Linux Kernel net device interface +* +* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. +* -------------------------------------------------------------------- +* +* linux-wlan +* +* The contents of this file are subject to the Mozilla Public +* License Version 1.1 (the "License"); you may not use this file +* except in compliance with the License. You may obtain a copy of +* the License at http://www.mozilla.org/MPL/ +* +* Software distributed under the License is distributed on an "AS +* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or +* implied. See the License for the specific language governing +* rights and limitations under the License. +* +* Alternatively, the contents of this file may be used under the +* terms of the GNU Public License version 2 (the "GPL"), in which +* case the provisions of the GPL are applicable instead of the +* above. If you wish to allow the use of your version of this file +* only under the terms of the GPL and not to allow others to use +* your version of this file under the MPL, indicate your decision +* by deleting the provisions above and replace them with the notice +* and other provisions required by the GPL. If you do not delete +* the provisions above, a recipient may use your version of this +* file under either the MPL or the GPL. +* +* -------------------------------------------------------------------- +* +* Inquiries regarding the linux-wlan Open Source project can be +* made directly to: +* +* AbsoluteValue Systems Inc. +* info@linux-wlan.com +* http://www.linux-wlan.com +* +* -------------------------------------------------------------------- +* +* Portions of the development of this software were funded by +* Intersil Corporation as part of PRISM(R) chipset product development. +* +* -------------------------------------------------------------------- +* +* The functions required for a Linux network device are defined here. +* +* -------------------------------------------------------------------- +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef SIOCETHTOOL +#include +#endif + +#include +#include +#include + +#include "p80211types.h" +#include "p80211hdr.h" +#include "p80211conv.h" +#include "p80211mgmt.h" +#include "p80211msg.h" +#include "p80211netdev.h" +#include "p80211ioctl.h" +#include "p80211req.h" +#include "p80211metastruct.h" +#include "p80211metadef.h" + +#include "cfg80211.c" + +/* netdevice method functions */ +static int p80211knetdev_init(netdevice_t *netdev); +static int p80211knetdev_open(netdevice_t *netdev); +static int p80211knetdev_stop(netdevice_t *netdev); +static int p80211knetdev_hard_start_xmit(struct sk_buff *skb, + netdevice_t *netdev); +static void p80211knetdev_set_multicast_list(netdevice_t *dev); +static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, + int cmd); +static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr); +static void p80211knetdev_tx_timeout(netdevice_t *netdev); +static int p80211_rx_typedrop(wlandevice_t *wlandev, u16 fc); + +int wlan_watchdog = 5000; +module_param(wlan_watchdog, int, 0644); +MODULE_PARM_DESC(wlan_watchdog, "transmit timeout in milliseconds"); + +int wlan_wext_write = 1; +module_param(wlan_wext_write, int, 0644); +MODULE_PARM_DESC(wlan_wext_write, "enable write wireless extensions"); + +/*---------------------------------------------------------------- +* p80211knetdev_init +* +* Init method for a Linux netdevice. Called in response to +* register_netdev. +* +* Arguments: +* none +* +* Returns: +* nothing +----------------------------------------------------------------*/ +static int p80211knetdev_init(netdevice_t *netdev) +{ + /* Called in response to register_netdev */ + /* This is usually the probe function, but the probe has */ + /* already been done by the MSD and the create_kdev */ + /* function. All we do here is return success */ + return 0; +} + +/*---------------------------------------------------------------- +* p80211knetdev_open +* +* Linux netdevice open method. Following a successful call here, +* the device is supposed to be ready for tx and rx. In our +* situation that may not be entirely true due to the state of the +* MAC below. +* +* Arguments: +* netdev Linux network device structure +* +* Returns: +* zero on success, non-zero otherwise +----------------------------------------------------------------*/ +static int p80211knetdev_open(netdevice_t *netdev) +{ + int result = 0; /* success */ + wlandevice_t *wlandev = netdev->ml_priv; + + /* Check to make sure the MSD is running */ + if (wlandev->msdstate != WLAN_MSD_RUNNING) + return -ENODEV; + + /* Tell the MSD to open */ + if (wlandev->open != NULL) { + result = wlandev->open(wlandev); + if (result == 0) { + netif_start_queue(wlandev->netdev); + wlandev->state = WLAN_DEVICE_OPEN; + } + } else { + result = -EAGAIN; + } + + return result; +} + +/*---------------------------------------------------------------- +* p80211knetdev_stop +* +* Linux netdevice stop (close) method. Following this call, +* no frames should go up or down through this interface. +* +* Arguments: +* netdev Linux network device structure +* +* Returns: +* zero on success, non-zero otherwise +----------------------------------------------------------------*/ +static int p80211knetdev_stop(netdevice_t *netdev) +{ + int result = 0; + wlandevice_t *wlandev = netdev->ml_priv; + + if (wlandev->close != NULL) + result = wlandev->close(wlandev); + + netif_stop_queue(wlandev->netdev); + wlandev->state = WLAN_DEVICE_CLOSED; + + return result; +} + +/*---------------------------------------------------------------- +* p80211netdev_rx +* +* Frame receive function called by the mac specific driver. +* +* Arguments: +* wlandev WLAN network device structure +* skb skbuff containing a full 802.11 frame. +* Returns: +* nothing +* Side effects: +* +----------------------------------------------------------------*/ +void p80211netdev_rx(wlandevice_t *wlandev, struct sk_buff *skb) +{ + /* Enqueue for post-irq processing */ + skb_queue_tail(&wlandev->nsd_rxq, skb); + tasklet_schedule(&wlandev->rx_bh); +} + +#define CONV_TO_ETHER_SKIPPED 0x01 +#define CONV_TO_ETHER_FAILED 0x02 + +/** + * p80211_convert_to_ether - conversion from 802.11 frame to ethernet frame + * @wlandev: pointer to WLAN device + * @skb: pointer to socket buffer + * + * Returns: 0 if conversion succeeded + * CONV_TO_ETHER_FAILED if conversion failed + * CONV_TO_ETHER_SKIPPED if frame is ignored + */ +static int p80211_convert_to_ether(wlandevice_t *wlandev, struct sk_buff *skb) +{ + struct p80211_hdr_a3 *hdr; + + hdr = (struct p80211_hdr_a3 *) skb->data; + if (p80211_rx_typedrop(wlandev, hdr->fc)) + return CONV_TO_ETHER_SKIPPED; + + /* perform mcast filtering: allow my local address through but reject + * anything else that isn't multicast + */ + if (wlandev->netdev->flags & IFF_ALLMULTI) { + if (!ether_addr_equal_unaligned(wlandev->netdev->dev_addr, + hdr->a1)) { + if (!is_multicast_ether_addr(hdr->a1)) + return CONV_TO_ETHER_SKIPPED; + } + } + + if (skb_p80211_to_ether(wlandev, wlandev->ethconv, skb) == 0) { + skb->dev->last_rx = jiffies; + wlandev->netdev->stats.rx_packets++; + wlandev->netdev->stats.rx_bytes += skb->len; + netif_rx_ni(skb); + return 0; + } + + netdev_dbg(wlandev->netdev, "p80211_convert_to_ether failed.\n"); + return CONV_TO_ETHER_FAILED; +} + +/** + * p80211netdev_rx_bh - deferred processing of all received frames + * + * @arg: pointer to WLAN network device structure (cast to unsigned long) + */ +static void p80211netdev_rx_bh(unsigned long arg) +{ + wlandevice_t *wlandev = (wlandevice_t *) arg; + struct sk_buff *skb = NULL; + netdevice_t *dev = wlandev->netdev; + + /* Let's empty our our queue */ + while ((skb = skb_dequeue(&wlandev->nsd_rxq))) { + if (wlandev->state == WLAN_DEVICE_OPEN) { + + if (dev->type != ARPHRD_ETHER) { + /* RAW frame; we shouldn't convert it */ + /* XXX Append the Prism Header here instead. */ + + /* set up various data fields */ + skb->dev = dev; + skb_reset_mac_header(skb); + skb->ip_summed = CHECKSUM_NONE; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = htons(ETH_P_80211_RAW); + dev->last_rx = jiffies; + + dev->stats.rx_packets++; + dev->stats.rx_bytes += skb->len; + netif_rx_ni(skb); + continue; + } else { + if (!p80211_convert_to_ether(wlandev, skb)) + continue; + } + } + dev_kfree_skb(skb); + } +} + +/*---------------------------------------------------------------- +* p80211knetdev_hard_start_xmit +* +* Linux netdevice method for transmitting a frame. +* +* Arguments: +* skb Linux sk_buff containing the frame. +* netdev Linux netdevice. +* +* Side effects: +* If the lower layers report that buffers are full. netdev->tbusy +* will be set to prevent higher layers from sending more traffic. +* +* Note: If this function returns non-zero, higher layers retain +* ownership of the skb. +* +* Returns: +* zero on success, non-zero on failure. +----------------------------------------------------------------*/ +static int p80211knetdev_hard_start_xmit(struct sk_buff *skb, + netdevice_t *netdev) +{ + int result = 0; + int txresult = -1; + wlandevice_t *wlandev = netdev->ml_priv; + union p80211_hdr p80211_hdr; + struct p80211_metawep p80211_wep; + + p80211_wep.data = NULL; + + if (skb == NULL) + return NETDEV_TX_OK; + + if (wlandev->state != WLAN_DEVICE_OPEN) { + result = 1; + goto failed; + } + + memset(&p80211_hdr, 0, sizeof(union p80211_hdr)); + memset(&p80211_wep, 0, sizeof(struct p80211_metawep)); + + if (netif_queue_stopped(netdev)) { + netdev_dbg(netdev, "called when queue stopped.\n"); + result = 1; + goto failed; + } + + netif_stop_queue(netdev); + + /* Check to see that a valid mode is set */ + switch (wlandev->macmode) { + case WLAN_MACMODE_IBSS_STA: + case WLAN_MACMODE_ESS_STA: + case WLAN_MACMODE_ESS_AP: + break; + default: + /* Mode isn't set yet, just drop the frame + * and return success . + * TODO: we need a saner way to handle this + */ + if (be16_to_cpu(skb->protocol) != ETH_P_80211_RAW) { + netif_start_queue(wlandev->netdev); + netdev_notice(netdev, "Tx attempt prior to association, frame dropped.\n"); + netdev->stats.tx_dropped++; + result = 0; + goto failed; + } + break; + } + + /* Check for raw transmits */ + if (be16_to_cpu(skb->protocol) == ETH_P_80211_RAW) { + if (!capable(CAP_NET_ADMIN)) { + result = 1; + goto failed; + } + /* move the header over */ + memcpy(&p80211_hdr, skb->data, sizeof(union p80211_hdr)); + skb_pull(skb, sizeof(union p80211_hdr)); + } else { + if (skb_ether_to_p80211 + (wlandev, wlandev->ethconv, skb, &p80211_hdr, + &p80211_wep) != 0) { + /* convert failed */ + netdev_dbg(netdev, "ether_to_80211(%d) failed.\n", + wlandev->ethconv); + result = 1; + goto failed; + } + } + if (wlandev->txframe == NULL) { + result = 1; + goto failed; + } + + netdev->trans_start = jiffies; + + netdev->stats.tx_packets++; + /* count only the packet payload */ + netdev->stats.tx_bytes += skb->len; + + txresult = wlandev->txframe(wlandev, skb, &p80211_hdr, &p80211_wep); + + if (txresult == 0) { + /* success and more buf */ + /* avail, re: hw_txdata */ + netif_wake_queue(wlandev->netdev); + result = NETDEV_TX_OK; + } else if (txresult == 1) { + /* success, no more avail */ + netdev_dbg(netdev, "txframe success, no more bufs\n"); + /* netdev->tbusy = 1; don't set here, irqhdlr */ + /* may have already cleared it */ + result = NETDEV_TX_OK; + } else if (txresult == 2) { + /* alloc failure, drop frame */ + netdev_dbg(netdev, "txframe returned alloc_fail\n"); + result = NETDEV_TX_BUSY; + } else { + /* buffer full or queue busy, drop frame. */ + netdev_dbg(netdev, "txframe returned full or busy\n"); + result = NETDEV_TX_BUSY; + } + +failed: + /* Free up the WEP buffer if it's not the same as the skb */ + if ((p80211_wep.data) && (p80211_wep.data != skb->data)) + kzfree(p80211_wep.data); + + /* we always free the skb here, never in a lower level. */ + if (!result) + dev_kfree_skb(skb); + + return result; +} + +/*---------------------------------------------------------------- +* p80211knetdev_set_multicast_list +* +* Called from higher layers whenever there's a need to set/clear +* promiscuous mode or rewrite the multicast list. +* +* Arguments: +* none +* +* Returns: +* nothing +----------------------------------------------------------------*/ +static void p80211knetdev_set_multicast_list(netdevice_t *dev) +{ + wlandevice_t *wlandev = dev->ml_priv; + + /* TODO: real multicast support as well */ + + if (wlandev->set_multicast_list) + wlandev->set_multicast_list(wlandev, dev); + +} + +#ifdef SIOCETHTOOL + +static int p80211netdev_ethtool(wlandevice_t *wlandev, void __user *useraddr) +{ + u32 ethcmd; + struct ethtool_drvinfo info; + struct ethtool_value edata; + + memset(&info, 0, sizeof(info)); + memset(&edata, 0, sizeof(edata)); + + if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd))) + return -EFAULT; + + switch (ethcmd) { + case ETHTOOL_GDRVINFO: + info.cmd = ethcmd; + snprintf(info.driver, sizeof(info.driver), "p80211_%s", + wlandev->nsdname); + snprintf(info.version, sizeof(info.version), "%s", + WLAN_RELEASE); + + if (copy_to_user(useraddr, &info, sizeof(info))) + return -EFAULT; + return 0; +#ifdef ETHTOOL_GLINK + case ETHTOOL_GLINK: + edata.cmd = ethcmd; + + if (wlandev->linkstatus && + (wlandev->macmode != WLAN_MACMODE_NONE)) { + edata.data = 1; + } else { + edata.data = 0; + } + + if (copy_to_user(useraddr, &edata, sizeof(edata))) + return -EFAULT; + return 0; +#endif + } + + return -EOPNOTSUPP; +} + +#endif + +/*---------------------------------------------------------------- +* p80211knetdev_do_ioctl +* +* Handle an ioctl call on one of our devices. Everything Linux +* ioctl specific is done here. Then we pass the contents of the +* ifr->data to the request message handler. +* +* Arguments: +* dev Linux kernel netdevice +* ifr Our private ioctl request structure, typed for the +* generic struct ifreq so we can use ptr to func +* w/o cast. +* +* Returns: +* zero on success, a negative errno on failure. Possible values: +* -ENETDOWN Device isn't up. +* -EBUSY cmd already in progress +* -ETIME p80211 cmd timed out (MSD may have its own timers) +* -EFAULT memory fault copying msg from user buffer +* -ENOMEM unable to allocate kernel msg buffer +* -ENOSYS bad magic, it the cmd really for us? +* -EintR sleeping on cmd, awakened by signal, cmd cancelled. +* +* Call Context: +* Process thread (ioctl caller). TODO: SMP support may require +* locks. +----------------------------------------------------------------*/ +static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd) +{ + int result = 0; + struct p80211ioctl_req *req = (struct p80211ioctl_req *) ifr; + wlandevice_t *wlandev = dev->ml_priv; + u8 *msgbuf; + + netdev_dbg(dev, "rx'd ioctl, cmd=%d, len=%d\n", cmd, req->len); + +#ifdef SIOCETHTOOL + if (cmd == SIOCETHTOOL) { + result = + p80211netdev_ethtool(wlandev, (void __user *)ifr->ifr_data); + goto bail; + } +#endif + + /* Test the magic, assume ifr is good if it's there */ + if (req->magic != P80211_IOCTL_MAGIC) { + result = -ENOSYS; + goto bail; + } + + if (cmd == P80211_IFTEST) { + result = 0; + goto bail; + } else if (cmd != P80211_IFREQ) { + result = -ENOSYS; + goto bail; + } + + /* Allocate a buf of size req->len */ + msgbuf = kmalloc(req->len, GFP_KERNEL); + if (msgbuf) { + if (copy_from_user(msgbuf, (void __user *)req->data, req->len)) + result = -EFAULT; + else + result = p80211req_dorequest(wlandev, msgbuf); + + if (result == 0) { + if (copy_to_user + ((void __user *)req->data, msgbuf, req->len)) { + result = -EFAULT; + } + } + kfree(msgbuf); + } else { + result = -ENOMEM; + } +bail: + /* If allocate,copyfrom or copyto fails, return errno */ + return result; +} + +/*---------------------------------------------------------------- +* p80211knetdev_set_mac_address +* +* Handles the ioctl for changing the MACAddress of a netdevice +* +* references: linux/netdevice.h and drivers/net/net_init.c +* +* NOTE: [MSM] We only prevent address changes when the netdev is +* up. We don't control anything based on dot11 state. If the +* address is changed on a STA that's currently associated, you +* will probably lose the ability to send and receive data frames. +* Just be aware. Therefore, this should usually only be done +* prior to scan/join/auth/assoc. +* +* Arguments: +* dev netdevice struct +* addr the new MACAddress (a struct) +* +* Returns: +* zero on success, a negative errno on failure. Possible values: +* -EBUSY device is bussy (cmd not possible) +* -and errors returned by: p80211req_dorequest(..) +* +* by: Collin R. Mulliner +----------------------------------------------------------------*/ +static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr) +{ + struct sockaddr *new_addr = addr; + struct p80211msg_dot11req_mibset dot11req; + p80211item_unk392_t *mibattr; + p80211item_pstr6_t *macaddr; + p80211item_uint32_t *resultcode; + int result; + + /* If we're running, we don't allow MAC address changes */ + if (netif_running(dev)) + return -EBUSY; + + /* Set up some convenience pointers. */ + mibattr = &dot11req.mibattribute; + macaddr = (p80211item_pstr6_t *) &mibattr->data; + resultcode = &dot11req.resultcode; + + /* Set up a dot11req_mibset */ + memset(&dot11req, 0, sizeof(struct p80211msg_dot11req_mibset)); + dot11req.msgcode = DIDmsg_dot11req_mibset; + dot11req.msglen = sizeof(struct p80211msg_dot11req_mibset); + memcpy(dot11req.devname, + ((wlandevice_t *) dev->ml_priv)->name, WLAN_DEVNAMELEN_MAX - 1); + + /* Set up the mibattribute argument */ + mibattr->did = DIDmsg_dot11req_mibset_mibattribute; + mibattr->status = P80211ENUM_msgitem_status_data_ok; + mibattr->len = sizeof(mibattr->data); + + macaddr->did = DIDmib_dot11mac_dot11OperationTable_dot11MACAddress; + macaddr->status = P80211ENUM_msgitem_status_data_ok; + macaddr->len = sizeof(macaddr->data); + macaddr->data.len = ETH_ALEN; + memcpy(&macaddr->data.data, new_addr->sa_data, ETH_ALEN); + + /* Set up the resultcode argument */ + resultcode->did = DIDmsg_dot11req_mibset_resultcode; + resultcode->status = P80211ENUM_msgitem_status_no_value; + resultcode->len = sizeof(resultcode->data); + resultcode->data = 0; + + /* now fire the request */ + result = p80211req_dorequest(dev->ml_priv, (u8 *) &dot11req); + + /* If the request wasn't successful, report an error and don't + * change the netdev address + */ + if (result != 0 || resultcode->data != P80211ENUM_resultcode_success) { + netdev_err(dev, "Low-level driver failed dot11req_mibset(dot11MACAddress).\n"); + result = -EADDRNOTAVAIL; + } else { + /* everything's ok, change the addr in netdev */ + memcpy(dev->dev_addr, new_addr->sa_data, dev->addr_len); + } + + return result; +} + +static int wlan_change_mtu(netdevice_t *dev, int new_mtu) +{ + /* 2312 is max 802.11 payload, 20 is overhead, (ether + llc +snap) + and another 8 for wep. */ + if ((new_mtu < 68) || (new_mtu > (2312 - 20 - 8))) + return -EINVAL; + + dev->mtu = new_mtu; + + return 0; +} + +static const struct net_device_ops p80211_netdev_ops = { + .ndo_init = p80211knetdev_init, + .ndo_open = p80211knetdev_open, + .ndo_stop = p80211knetdev_stop, + .ndo_start_xmit = p80211knetdev_hard_start_xmit, + .ndo_set_rx_mode = p80211knetdev_set_multicast_list, + .ndo_do_ioctl = p80211knetdev_do_ioctl, + .ndo_set_mac_address = p80211knetdev_set_mac_address, + .ndo_tx_timeout = p80211knetdev_tx_timeout, + .ndo_change_mtu = wlan_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +/*---------------------------------------------------------------- +* wlan_setup +* +* Roughly matches the functionality of ether_setup. Here +* we set up any members of the wlandevice structure that are common +* to all devices. Additionally, we allocate a linux 'struct device' +* and perform the same setup as ether_setup. +* +* Note: It's important that the caller have setup the wlandev->name +* ptr prior to calling this function. +* +* Arguments: +* wlandev ptr to the wlandev structure for the +* interface. +* physdev ptr to usb device +* Returns: +* zero on success, non-zero otherwise. +* Call Context: +* Should be process thread. We'll assume it might be +* interrupt though. When we add support for statically +* compiled drivers, this function will be called in the +* context of the kernel startup code. +----------------------------------------------------------------*/ +int wlan_setup(wlandevice_t *wlandev, struct device *physdev) +{ + int result = 0; + netdevice_t *netdev; + struct wiphy *wiphy; + struct wireless_dev *wdev; + + /* Set up the wlandev */ + wlandev->state = WLAN_DEVICE_CLOSED; + wlandev->ethconv = WLAN_ETHCONV_8021h; + wlandev->macmode = WLAN_MACMODE_NONE; + + /* Set up the rx queue */ + skb_queue_head_init(&wlandev->nsd_rxq); + tasklet_init(&wlandev->rx_bh, + p80211netdev_rx_bh, (unsigned long)wlandev); + + /* Allocate and initialize the wiphy struct */ + wiphy = wlan_create_wiphy(physdev, wlandev); + if (wiphy == NULL) { + dev_err(physdev, "Failed to alloc wiphy.\n"); + return 1; + } + + /* Allocate and initialize the struct device */ + netdev = alloc_netdev(sizeof(struct wireless_dev), "wlan%d", + NET_NAME_UNKNOWN, ether_setup); + if (netdev == NULL) { + dev_err(physdev, "Failed to alloc netdev.\n"); + wlan_free_wiphy(wiphy); + result = 1; + } else { + wlandev->netdev = netdev; + netdev->ml_priv = wlandev; + netdev->netdev_ops = &p80211_netdev_ops; + wdev = netdev_priv(netdev); + wdev->wiphy = wiphy; + wdev->iftype = NL80211_IFTYPE_STATION; + netdev->ieee80211_ptr = wdev; + + netif_stop_queue(netdev); + netif_carrier_off(netdev); + } + + return result; +} + +/*---------------------------------------------------------------- +* wlan_unsetup +* +* This function is paired with the wlan_setup routine. It should +* be called after unregister_wlandev. Basically, all it does is +* free the 'struct device' that's associated with the wlandev. +* We do it here because the 'struct device' isn't allocated +* explicitly in the driver code, it's done in wlan_setup. To +* do the free in the driver might seem like 'magic'. +* +* Arguments: +* wlandev ptr to the wlandev structure for the +* interface. +* Call Context: +* Should be process thread. We'll assume it might be +* interrupt though. When we add support for statically +* compiled drivers, this function will be called in the +* context of the kernel startup code. +----------------------------------------------------------------*/ +void wlan_unsetup(wlandevice_t *wlandev) +{ + struct wireless_dev *wdev; + + tasklet_kill(&wlandev->rx_bh); + + if (wlandev->netdev) { + wdev = netdev_priv(wlandev->netdev); + if (wdev->wiphy) + wlan_free_wiphy(wdev->wiphy); + free_netdev(wlandev->netdev); + wlandev->netdev = NULL; + } +} + +/*---------------------------------------------------------------- +* register_wlandev +* +* Roughly matches the functionality of register_netdev. This function +* is called after the driver has successfully probed and set up the +* resources for the device. It's now ready to become a named device +* in the Linux system. +* +* First we allocate a name for the device (if not already set), then +* we call the Linux function register_netdevice. +* +* Arguments: +* wlandev ptr to the wlandev structure for the +* interface. +* Returns: +* zero on success, non-zero otherwise. +* Call Context: +* Can be either interrupt or not. +----------------------------------------------------------------*/ +int register_wlandev(wlandevice_t *wlandev) +{ + return register_netdev(wlandev->netdev); +} + +/*---------------------------------------------------------------- +* unregister_wlandev +* +* Roughly matches the functionality of unregister_netdev. This +* function is called to remove a named device from the system. +* +* First we tell linux that the device should no longer exist. +* Then we remove it from the list of known wlan devices. +* +* Arguments: +* wlandev ptr to the wlandev structure for the +* interface. +* Returns: +* zero on success, non-zero otherwise. +* Call Context: +* Can be either interrupt or not. +----------------------------------------------------------------*/ +int unregister_wlandev(wlandevice_t *wlandev) +{ + struct sk_buff *skb; + + unregister_netdev(wlandev->netdev); + + /* Now to clean out the rx queue */ + while ((skb = skb_dequeue(&wlandev->nsd_rxq))) + dev_kfree_skb(skb); + + return 0; +} + +/*---------------------------------------------------------------- +* p80211netdev_hwremoved +* +* Hardware removed notification. This function should be called +* immediately after an MSD has detected that the underlying hardware +* has been yanked out from under us. The primary things we need +* to do are: +* - Mark the wlandev +* - Prevent any further traffic from the knetdev i/f +* - Prevent any further requests from mgmt i/f +* - If there are any waitq'd mgmt requests or mgmt-frame exchanges, +* shut them down. +* - Call the MSD hwremoved function. +* +* The remainder of the cleanup will be handled by unregister(). +* Our primary goal here is to prevent as much tickling of the MSD +* as possible since the MSD is already in a 'wounded' state. +* +* TODO: As new features are added, this function should be +* updated. +* +* Arguments: +* wlandev WLAN network device structure +* Returns: +* nothing +* Side effects: +* +* Call context: +* Usually interrupt. +----------------------------------------------------------------*/ +void p80211netdev_hwremoved(wlandevice_t *wlandev) +{ + wlandev->hwremoved = 1; + if (wlandev->state == WLAN_DEVICE_OPEN) + netif_stop_queue(wlandev->netdev); + + netif_device_detach(wlandev->netdev); +} + +/*---------------------------------------------------------------- +* p80211_rx_typedrop +* +* Classifies the frame, increments the appropriate counter, and +* returns 0|1|2 indicating whether the driver should handle, ignore, or +* drop the frame +* +* Arguments: +* wlandev wlan device structure +* fc frame control field +* +* Returns: +* zero if the frame should be handled by the driver, +* one if the frame should be ignored +* anything else means we drop it. +* +* Side effects: +* +* Call context: +* interrupt +----------------------------------------------------------------*/ +static int p80211_rx_typedrop(wlandevice_t *wlandev, u16 fc) +{ + u16 ftype; + u16 fstype; + int drop = 0; + /* Classify frame, increment counter */ + ftype = WLAN_GET_FC_FTYPE(fc); + fstype = WLAN_GET_FC_FSTYPE(fc); +#if 0 + netdev_dbg(wlandev->netdev, "rx_typedrop : ftype=%d fstype=%d.\n", + ftype, fstype); +#endif + switch (ftype) { + case WLAN_FTYPE_MGMT: + if ((wlandev->netdev->flags & IFF_PROMISC) || + (wlandev->netdev->flags & IFF_ALLMULTI)) { + drop = 1; + break; + } + netdev_dbg(wlandev->netdev, "rx'd mgmt:\n"); + wlandev->rx.mgmt++; + switch (fstype) { + case WLAN_FSTYPE_ASSOCREQ: + /* printk("assocreq"); */ + wlandev->rx.assocreq++; + break; + case WLAN_FSTYPE_ASSOCRESP: + /* printk("assocresp"); */ + wlandev->rx.assocresp++; + break; + case WLAN_FSTYPE_REASSOCREQ: + /* printk("reassocreq"); */ + wlandev->rx.reassocreq++; + break; + case WLAN_FSTYPE_REASSOCRESP: + /* printk("reassocresp"); */ + wlandev->rx.reassocresp++; + break; + case WLAN_FSTYPE_PROBEREQ: + /* printk("probereq"); */ + wlandev->rx.probereq++; + break; + case WLAN_FSTYPE_PROBERESP: + /* printk("proberesp"); */ + wlandev->rx.proberesp++; + break; + case WLAN_FSTYPE_BEACON: + /* printk("beacon"); */ + wlandev->rx.beacon++; + break; + case WLAN_FSTYPE_ATIM: + /* printk("atim"); */ + wlandev->rx.atim++; + break; + case WLAN_FSTYPE_DISASSOC: + /* printk("disassoc"); */ + wlandev->rx.disassoc++; + break; + case WLAN_FSTYPE_AUTHEN: + /* printk("authen"); */ + wlandev->rx.authen++; + break; + case WLAN_FSTYPE_DEAUTHEN: + /* printk("deauthen"); */ + wlandev->rx.deauthen++; + break; + default: + /* printk("unknown"); */ + wlandev->rx.mgmt_unknown++; + break; + } + /* printk("\n"); */ + drop = 2; + break; + + case WLAN_FTYPE_CTL: + if ((wlandev->netdev->flags & IFF_PROMISC) || + (wlandev->netdev->flags & IFF_ALLMULTI)) { + drop = 1; + break; + } + netdev_dbg(wlandev->netdev, "rx'd ctl:\n"); + wlandev->rx.ctl++; + switch (fstype) { + case WLAN_FSTYPE_PSPOLL: + /* printk("pspoll"); */ + wlandev->rx.pspoll++; + break; + case WLAN_FSTYPE_RTS: + /* printk("rts"); */ + wlandev->rx.rts++; + break; + case WLAN_FSTYPE_CTS: + /* printk("cts"); */ + wlandev->rx.cts++; + break; + case WLAN_FSTYPE_ACK: + /* printk("ack"); */ + wlandev->rx.ack++; + break; + case WLAN_FSTYPE_CFEND: + /* printk("cfend"); */ + wlandev->rx.cfend++; + break; + case WLAN_FSTYPE_CFENDCFACK: + /* printk("cfendcfack"); */ + wlandev->rx.cfendcfack++; + break; + default: + /* printk("unknown"); */ + wlandev->rx.ctl_unknown++; + break; + } + /* printk("\n"); */ + drop = 2; + break; + + case WLAN_FTYPE_DATA: + wlandev->rx.data++; + switch (fstype) { + case WLAN_FSTYPE_DATAONLY: + wlandev->rx.dataonly++; + break; + case WLAN_FSTYPE_DATA_CFACK: + wlandev->rx.data_cfack++; + break; + case WLAN_FSTYPE_DATA_CFPOLL: + wlandev->rx.data_cfpoll++; + break; + case WLAN_FSTYPE_DATA_CFACK_CFPOLL: + wlandev->rx.data__cfack_cfpoll++; + break; + case WLAN_FSTYPE_NULL: + netdev_dbg(wlandev->netdev, "rx'd data:null\n"); + wlandev->rx.null++; + break; + case WLAN_FSTYPE_CFACK: + netdev_dbg(wlandev->netdev, "rx'd data:cfack\n"); + wlandev->rx.cfack++; + break; + case WLAN_FSTYPE_CFPOLL: + netdev_dbg(wlandev->netdev, "rx'd data:cfpoll\n"); + wlandev->rx.cfpoll++; + break; + case WLAN_FSTYPE_CFACK_CFPOLL: + netdev_dbg(wlandev->netdev, "rx'd data:cfack_cfpoll\n"); + wlandev->rx.cfack_cfpoll++; + break; + default: + /* printk("unknown"); */ + wlandev->rx.data_unknown++; + break; + } + + break; + } + return drop; +} + +static void p80211knetdev_tx_timeout(netdevice_t *netdev) +{ + wlandevice_t *wlandev = netdev->ml_priv; + + if (wlandev->tx_timeout) { + wlandev->tx_timeout(wlandev); + } else { + netdev_warn(netdev, "Implement tx_timeout for %s\n", + wlandev->nsdname); + netif_wake_queue(wlandev->netdev); + } +}