X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fpwm%2Fpwm-sti.c;fp=kernel%2Fdrivers%2Fpwm%2Fpwm-sti.c;h=92abbd56b9f7183810eb222b8b194f3817838367;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/pwm/pwm-sti.c b/kernel/drivers/pwm/pwm-sti.c new file mode 100644 index 000000000..92abbd56b --- /dev/null +++ b/kernel/drivers/pwm/pwm-sti.c @@ -0,0 +1,410 @@ +/* + * PWM device driver for ST SoCs. + * Author: Ajit Pal Singh + * + * Copyright (C) 2013-2014 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STI_DS_REG(ch) (4 * (ch)) /* Channel's Duty Cycle register */ +#define STI_PWMCR 0x50 /* Control/Config register */ +#define STI_INTEN 0x54 /* Interrupt Enable/Disable register */ +#define PWM_PRESCALE_LOW_MASK 0x0f +#define PWM_PRESCALE_HIGH_MASK 0xf0 + +/* Regfield IDs */ +enum { + PWMCLK_PRESCALE_LOW, + PWMCLK_PRESCALE_HIGH, + PWM_EN, + PWM_INT_EN, + + /* Keep last */ + MAX_REGFIELDS +}; + +struct sti_pwm_compat_data { + const struct reg_field *reg_fields; + unsigned int num_chan; + unsigned int max_pwm_cnt; + unsigned int max_prescale; +}; + +struct sti_pwm_chip { + struct device *dev; + struct clk *clk; + unsigned long clk_rate; + struct regmap *regmap; + struct sti_pwm_compat_data *cdata; + struct regmap_field *prescale_low; + struct regmap_field *prescale_high; + struct regmap_field *pwm_en; + struct regmap_field *pwm_int_en; + struct pwm_chip chip; + struct pwm_device *cur; + unsigned long configured; + unsigned int en_count; + struct mutex sti_pwm_lock; /* To sync between enable/disable calls */ + void __iomem *mmio; +}; + +static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = { + [PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWMCR, 0, 3), + [PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWMCR, 11, 14), + [PWM_EN] = REG_FIELD(STI_PWMCR, 9, 9), + [PWM_INT_EN] = REG_FIELD(STI_INTEN, 0, 0), +}; + +static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip) +{ + return container_of(chip, struct sti_pwm_chip, chip); +} + +/* + * Calculate the prescaler value corresponding to the period. + */ +static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period, + unsigned int *prescale) +{ + struct sti_pwm_compat_data *cdata = pc->cdata; + unsigned long val; + unsigned int ps; + + /* + * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_count + 1)) - 1 + */ + val = NSEC_PER_SEC / pc->clk_rate; + val *= cdata->max_pwm_cnt + 1; + + if (period % val) { + return -EINVAL; + } else { + ps = period / val - 1; + if (ps > cdata->max_prescale) + return -EINVAL; + } + *prescale = ps; + + return 0; +} + +/* + * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. + * The only way to change the period (apart from changing the PWM input clock) + * is to change the PWM clock prescaler. + * The prescaler is of 8 bits, so 256 prescaler values and hence + * 256 possible period values are supported (for a particular clock rate). + * The requested period will be applied only if it matches one of these + * 256 values. + */ +static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + struct sti_pwm_compat_data *cdata = pc->cdata; + struct pwm_device *cur = pc->cur; + struct device *dev = pc->dev; + unsigned int prescale = 0, pwmvalx; + int ret; + unsigned int ncfg; + bool period_same = false; + + ncfg = hweight_long(pc->configured); + if (ncfg) + period_same = (period_ns == pwm_get_period(cur)); + + /* Allow configuration changes if one of the + * following conditions satisfy. + * 1. No channels have been configured. + * 2. Only one channel has been configured and the new request + * is for the same channel. + * 3. Only one channel has been configured and the new request is + * for a new channel and period of the new channel is same as + * the current configured period. + * 4. More than one channels are configured and period of the new + * requestis the same as the current period. + */ + if (!ncfg || + ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) || + ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) || + ((ncfg > 1) && period_same)) { + /* Enable clock before writing to PWM registers. */ + ret = clk_enable(pc->clk); + if (ret) + return ret; + + if (!period_same) { + ret = sti_pwm_get_prescale(pc, period_ns, &prescale); + if (ret) + goto clk_dis; + + ret = + regmap_field_write(pc->prescale_low, + prescale & PWM_PRESCALE_LOW_MASK); + if (ret) + goto clk_dis; + + ret = + regmap_field_write(pc->prescale_high, + (prescale & PWM_PRESCALE_HIGH_MASK) >> 4); + if (ret) + goto clk_dis; + } + + /* + * When PWMVal == 0, PWM pulse = 1 local clock cycle. + * When PWMVal == max_pwm_count, + * PWM pulse = (max_pwm_count + 1) local cycles, + * that is continuous pulse: signal never goes low. + */ + pwmvalx = cdata->max_pwm_cnt * duty_ns / period_ns; + + ret = regmap_write(pc->regmap, STI_DS_REG(pwm->hwpwm), pwmvalx); + if (ret) + goto clk_dis; + + ret = regmap_field_write(pc->pwm_int_en, 0); + + set_bit(pwm->hwpwm, &pc->configured); + pc->cur = pwm; + + dev_dbg(dev, "prescale:%u, period:%i, duty:%i, pwmvalx:%u\n", + prescale, period_ns, duty_ns, pwmvalx); + } else { + return -EINVAL; + } + +clk_dis: + clk_disable(pc->clk); + return ret; +} + +static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + struct device *dev = pc->dev; + int ret = 0; + + /* + * Since we have a common enable for all PWM channels, + * do not enable if already enabled. + */ + mutex_lock(&pc->sti_pwm_lock); + if (!pc->en_count) { + ret = clk_enable(pc->clk); + if (ret) + goto out; + + ret = regmap_field_write(pc->pwm_en, 1); + if (ret) { + dev_err(dev, "failed to enable PWM device:%d\n", + pwm->hwpwm); + goto out; + } + } + pc->en_count++; +out: + mutex_unlock(&pc->sti_pwm_lock); + return ret; +} + +static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + + mutex_lock(&pc->sti_pwm_lock); + if (--pc->en_count) { + mutex_unlock(&pc->sti_pwm_lock); + return; + } + regmap_field_write(pc->pwm_en, 0); + + clk_disable(pc->clk); + mutex_unlock(&pc->sti_pwm_lock); +} + +static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + + clear_bit(pwm->hwpwm, &pc->configured); +} + +static const struct pwm_ops sti_pwm_ops = { + .config = sti_pwm_config, + .enable = sti_pwm_enable, + .disable = sti_pwm_disable, + .free = sti_pwm_free, + .owner = THIS_MODULE, +}; + +static int sti_pwm_probe_dt(struct sti_pwm_chip *pc) +{ + struct device *dev = pc->dev; + const struct reg_field *reg_fields; + struct device_node *np = dev->of_node; + struct sti_pwm_compat_data *cdata = pc->cdata; + u32 num_chan; + + of_property_read_u32(np, "st,pwm-num-chan", &num_chan); + if (num_chan) + cdata->num_chan = num_chan; + + reg_fields = cdata->reg_fields; + + pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWMCLK_PRESCALE_LOW]); + if (IS_ERR(pc->prescale_low)) + return PTR_ERR(pc->prescale_low); + + pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWMCLK_PRESCALE_HIGH]); + if (IS_ERR(pc->prescale_high)) + return PTR_ERR(pc->prescale_high); + + pc->pwm_en = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWM_EN]); + if (IS_ERR(pc->pwm_en)) + return PTR_ERR(pc->pwm_en); + + pc->pwm_int_en = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWM_INT_EN]); + if (IS_ERR(pc->pwm_int_en)) + return PTR_ERR(pc->pwm_int_en); + + return 0; +} + +static const struct regmap_config sti_pwm_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int sti_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sti_pwm_compat_data *cdata; + struct sti_pwm_chip *pc; + struct resource *res; + int ret; + + pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); + if (!pc) + return -ENOMEM; + + cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL); + if (!cdata) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + pc->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(pc->mmio)) + return PTR_ERR(pc->mmio); + + pc->regmap = devm_regmap_init_mmio(dev, pc->mmio, + &sti_pwm_regmap_config); + if (IS_ERR(pc->regmap)) + return PTR_ERR(pc->regmap); + + /* + * Setup PWM data with default values: some values could be replaced + * with specific ones provided from Device Tree. + */ + cdata->reg_fields = &sti_pwm_regfields[0]; + cdata->max_prescale = 0xff; + cdata->max_pwm_cnt = 255; + cdata->num_chan = 1; + + pc->cdata = cdata; + pc->dev = dev; + pc->en_count = 0; + mutex_init(&pc->sti_pwm_lock); + + ret = sti_pwm_probe_dt(pc); + if (ret) + return ret; + + pc->clk = of_clk_get_by_name(dev->of_node, "pwm"); + if (IS_ERR(pc->clk)) { + dev_err(dev, "failed to get PWM clock\n"); + return PTR_ERR(pc->clk); + } + + pc->clk_rate = clk_get_rate(pc->clk); + if (!pc->clk_rate) { + dev_err(dev, "failed to get clock rate\n"); + return -EINVAL; + } + + ret = clk_prepare(pc->clk); + if (ret) { + dev_err(dev, "failed to prepare clock\n"); + return ret; + } + + pc->chip.dev = dev; + pc->chip.ops = &sti_pwm_ops; + pc->chip.base = -1; + pc->chip.npwm = pc->cdata->num_chan; + pc->chip.can_sleep = true; + + ret = pwmchip_add(&pc->chip); + if (ret < 0) { + clk_unprepare(pc->clk); + return ret; + } + + platform_set_drvdata(pdev, pc); + + return 0; +} + +static int sti_pwm_remove(struct platform_device *pdev) +{ + struct sti_pwm_chip *pc = platform_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < pc->cdata->num_chan; i++) + pwm_disable(&pc->chip.pwms[i]); + + clk_unprepare(pc->clk); + + return pwmchip_remove(&pc->chip); +} + +static const struct of_device_id sti_pwm_of_match[] = { + { .compatible = "st,sti-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sti_pwm_of_match); + +static struct platform_driver sti_pwm_driver = { + .driver = { + .name = "sti-pwm", + .of_match_table = sti_pwm_of_match, + }, + .probe = sti_pwm_probe, + .remove = sti_pwm_remove, +}; +module_platform_driver(sti_pwm_driver); + +MODULE_AUTHOR("Ajit Pal Singh "); +MODULE_DESCRIPTION("STMicroelectronics ST PWM driver"); +MODULE_LICENSE("GPL");