X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fpcmcia%2Fpxa2xx_viper.c;fp=kernel%2Fdrivers%2Fpcmcia%2Fpxa2xx_viper.c;h=7ac6647d286eb326933dcd9028bb5b9badf3271c;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git

diff --git a/kernel/drivers/pcmcia/pxa2xx_viper.c b/kernel/drivers/pcmcia/pxa2xx_viper.c
new file mode 100644
index 000000000..7ac6647d2
--- /dev/null
+++ b/kernel/drivers/pcmcia/pxa2xx_viper.c
@@ -0,0 +1,182 @@
+/*
+ * Viper/Zeus PCMCIA support
+ *   Copyright 2004 Arcom Control Systems
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ *
+ * Based on:
+ *   iPAQ h2200 PCMCIA support
+ *   Copyright 2004 Koen Kooi <koen@vestingbar.nl>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/irq.h>
+
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
+
+#include "soc_common.h"
+#include "pxa2xx_base.h"
+
+static struct platform_device *arcom_pcmcia_dev;
+
+static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
+{
+	return arcom_pcmcia_dev->dev.platform_data;
+}
+
+static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+	unsigned long flags;
+
+	skt->stat[SOC_STAT_CD].gpio = pdata->cd_gpio;
+	skt->stat[SOC_STAT_CD].name = "PCMCIA_CD";
+	skt->stat[SOC_STAT_RDY].gpio = pdata->rdy_gpio;
+	skt->stat[SOC_STAT_RDY].name = "CF ready";
+
+	if (gpio_request(pdata->pwr_gpio, "CF power"))
+		goto err_request_pwr;
+
+	local_irq_save(flags);
+
+	if (gpio_direction_output(pdata->pwr_gpio, 0)) {
+		local_irq_restore(flags);
+		goto err_dir;
+	}
+
+	local_irq_restore(flags);
+
+	return 0;
+
+err_dir:
+	gpio_free(pdata->pwr_gpio);
+err_request_pwr:
+	dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
+	return -1;
+}
+
+/*
+ * Release all resources.
+ */
+static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
+	gpio_free(pdata->pwr_gpio);
+}
+
+static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				      struct pcmcia_state *state)
+{
+	state->vs_3v  = 1; /* Can only apply 3.3V */
+	state->vs_Xv  = 0;
+}
+
+static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					 const socket_state_t *state)
+{
+	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
+	/* Silently ignore Vpp, output enable, speaker enable. */
+	pdata->reset(state->flags & SS_RESET);
+
+	/* Apply socket voltage */
+	switch (state->Vcc) {
+	case 0:
+		gpio_set_value(pdata->pwr_gpio, 0);
+		break;
+	case 33:
+		gpio_set_value(pdata->pwr_gpio, 1);
+		break;
+	default:
+		dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
+		return -1;
+	}
+
+	return 0;
+}
+
+static struct pcmcia_low_level viper_pcmcia_ops = {
+	.owner          	= THIS_MODULE,
+	.hw_init        	= viper_pcmcia_hw_init,
+	.hw_shutdown		= viper_pcmcia_hw_shutdown,
+	.socket_state		= viper_pcmcia_socket_state,
+	.configure_socket	= viper_pcmcia_configure_socket,
+	.nr         		= 1,
+};
+
+static struct platform_device *viper_pcmcia_device;
+
+static int viper_pcmcia_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	/* I can't imagine more than one device, but you never know... */
+	if (arcom_pcmcia_dev)
+		return -EEXIST;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!viper_pcmcia_device)
+		return -ENOMEM;
+
+	arcom_pcmcia_dev = pdev;
+
+	viper_pcmcia_device->dev.parent = &pdev->dev;
+
+	ret = platform_device_add_data(viper_pcmcia_device,
+				       &viper_pcmcia_ops,
+				       sizeof(viper_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(viper_pcmcia_device);
+
+	if (ret) {
+		platform_device_put(viper_pcmcia_device);
+		arcom_pcmcia_dev = NULL;
+	}
+
+	return ret;
+}
+
+static int viper_pcmcia_remove(struct platform_device *pdev)
+{
+	platform_device_unregister(viper_pcmcia_device);
+	arcom_pcmcia_dev = NULL;
+	return 0;
+}
+
+static struct platform_device_id viper_pcmcia_id_table[] = {
+	{ .name = "viper-pcmcia", },
+	{ .name = "zeus-pcmcia",  },
+	{ },
+};
+
+static struct platform_driver viper_pcmcia_driver = {
+	.probe		= viper_pcmcia_probe,
+	.remove		= viper_pcmcia_remove,
+	.driver		= {
+		.name	= "arcom-pcmcia",
+	},
+	.id_table	= viper_pcmcia_id_table,
+};
+
+module_platform_driver(viper_pcmcia_driver);
+
+MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
+MODULE_LICENSE("GPL");