X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fpci%2Fhotplug%2Fshpchp_hpc.c;fp=kernel%2Fdrivers%2Fpci%2Fhotplug%2Fshpchp_hpc.c;h=7d223e9080efb34aef5b1d02f77732c77b812402;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/pci/hotplug/shpchp_hpc.c b/kernel/drivers/pci/hotplug/shpchp_hpc.c new file mode 100644 index 000000000..7d223e908 --- /dev/null +++ b/kernel/drivers/pci/hotplug/shpchp_hpc.c @@ -0,0 +1,1111 @@ +/* + * Standard PCI Hot Plug Driver + * + * Copyright (C) 1995,2001 Compaq Computer Corporation + * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2001 IBM Corp. + * Copyright (C) 2003-2004 Intel Corporation + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to , + * + */ + +#include +#include +#include +#include +#include + +#include "shpchp.h" + +/* Slot Available Register I field definition */ +#define SLOT_33MHZ 0x0000001f +#define SLOT_66MHZ_PCIX 0x00001f00 +#define SLOT_100MHZ_PCIX 0x001f0000 +#define SLOT_133MHZ_PCIX 0x1f000000 + +/* Slot Available Register II field definition */ +#define SLOT_66MHZ 0x0000001f +#define SLOT_66MHZ_PCIX_266 0x00000f00 +#define SLOT_100MHZ_PCIX_266 0x0000f000 +#define SLOT_133MHZ_PCIX_266 0x000f0000 +#define SLOT_66MHZ_PCIX_533 0x00f00000 +#define SLOT_100MHZ_PCIX_533 0x0f000000 +#define SLOT_133MHZ_PCIX_533 0xf0000000 + +/* Slot Configuration */ +#define SLOT_NUM 0x0000001F +#define FIRST_DEV_NUM 0x00001F00 +#define PSN 0x07FF0000 +#define UPDOWN 0x20000000 +#define MRLSENSOR 0x40000000 +#define ATTN_BUTTON 0x80000000 + +/* + * Interrupt Locator Register definitions + */ +#define CMD_INTR_PENDING (1 << 0) +#define SLOT_INTR_PENDING(i) (1 << (i + 1)) + +/* + * Controller SERR-INT Register + */ +#define GLOBAL_INTR_MASK (1 << 0) +#define GLOBAL_SERR_MASK (1 << 1) +#define COMMAND_INTR_MASK (1 << 2) +#define ARBITER_SERR_MASK (1 << 3) +#define COMMAND_DETECTED (1 << 16) +#define ARBITER_DETECTED (1 << 17) +#define SERR_INTR_RSVDZ_MASK 0xfffc0000 + +/* + * Logical Slot Register definitions + */ +#define SLOT_REG(i) (SLOT1 + (4 * i)) + +#define SLOT_STATE_SHIFT (0) +#define SLOT_STATE_MASK (3 << 0) +#define SLOT_STATE_PWRONLY (1) +#define SLOT_STATE_ENABLED (2) +#define SLOT_STATE_DISABLED (3) +#define PWR_LED_STATE_SHIFT (2) +#define PWR_LED_STATE_MASK (3 << 2) +#define ATN_LED_STATE_SHIFT (4) +#define ATN_LED_STATE_MASK (3 << 4) +#define ATN_LED_STATE_ON (1) +#define ATN_LED_STATE_BLINK (2) +#define ATN_LED_STATE_OFF (3) +#define POWER_FAULT (1 << 6) +#define ATN_BUTTON (1 << 7) +#define MRL_SENSOR (1 << 8) +#define MHZ66_CAP (1 << 9) +#define PRSNT_SHIFT (10) +#define PRSNT_MASK (3 << 10) +#define PCIX_CAP_SHIFT (12) +#define PCIX_CAP_MASK_PI1 (3 << 12) +#define PCIX_CAP_MASK_PI2 (7 << 12) +#define PRSNT_CHANGE_DETECTED (1 << 16) +#define ISO_PFAULT_DETECTED (1 << 17) +#define BUTTON_PRESS_DETECTED (1 << 18) +#define MRL_CHANGE_DETECTED (1 << 19) +#define CON_PFAULT_DETECTED (1 << 20) +#define PRSNT_CHANGE_INTR_MASK (1 << 24) +#define ISO_PFAULT_INTR_MASK (1 << 25) +#define BUTTON_PRESS_INTR_MASK (1 << 26) +#define MRL_CHANGE_INTR_MASK (1 << 27) +#define CON_PFAULT_INTR_MASK (1 << 28) +#define MRL_CHANGE_SERR_MASK (1 << 29) +#define CON_PFAULT_SERR_MASK (1 << 30) +#define SLOT_REG_RSVDZ_MASK ((1 << 15) | (7 << 21)) + +/* + * SHPC Command Code definitions + * + * Slot Operation 00h - 3Fh + * Set Bus Segment Speed/Mode A 40h - 47h + * Power-Only All Slots 48h + * Enable All Slots 49h + * Set Bus Segment Speed/Mode B (PI=2) 50h - 5Fh + * Reserved Command Codes 60h - BFh + * Vendor Specific Commands C0h - FFh + */ +#define SET_SLOT_PWR 0x01 /* Slot Operation */ +#define SET_SLOT_ENABLE 0x02 +#define SET_SLOT_DISABLE 0x03 +#define SET_PWR_ON 0x04 +#define SET_PWR_BLINK 0x08 +#define SET_PWR_OFF 0x0c +#define SET_ATTN_ON 0x10 +#define SET_ATTN_BLINK 0x20 +#define SET_ATTN_OFF 0x30 +#define SETA_PCI_33MHZ 0x40 /* Set Bus Segment Speed/Mode A */ +#define SETA_PCI_66MHZ 0x41 +#define SETA_PCIX_66MHZ 0x42 +#define SETA_PCIX_100MHZ 0x43 +#define SETA_PCIX_133MHZ 0x44 +#define SETA_RESERVED1 0x45 +#define SETA_RESERVED2 0x46 +#define SETA_RESERVED3 0x47 +#define SET_PWR_ONLY_ALL 0x48 /* Power-Only All Slots */ +#define SET_ENABLE_ALL 0x49 /* Enable All Slots */ +#define SETB_PCI_33MHZ 0x50 /* Set Bus Segment Speed/Mode B */ +#define SETB_PCI_66MHZ 0x51 +#define SETB_PCIX_66MHZ_PM 0x52 +#define SETB_PCIX_100MHZ_PM 0x53 +#define SETB_PCIX_133MHZ_PM 0x54 +#define SETB_PCIX_66MHZ_EM 0x55 +#define SETB_PCIX_100MHZ_EM 0x56 +#define SETB_PCIX_133MHZ_EM 0x57 +#define SETB_PCIX_66MHZ_266 0x58 +#define SETB_PCIX_100MHZ_266 0x59 +#define SETB_PCIX_133MHZ_266 0x5a +#define SETB_PCIX_66MHZ_533 0x5b +#define SETB_PCIX_100MHZ_533 0x5c +#define SETB_PCIX_133MHZ_533 0x5d +#define SETB_RESERVED1 0x5e +#define SETB_RESERVED2 0x5f + +/* + * SHPC controller command error code + */ +#define SWITCH_OPEN 0x1 +#define INVALID_CMD 0x2 +#define INVALID_SPEED_MODE 0x4 + +/* + * For accessing SHPC Working Register Set via PCI Configuration Space + */ +#define DWORD_SELECT 0x2 +#define DWORD_DATA 0x4 + +/* Field Offset in Logical Slot Register - byte boundary */ +#define SLOT_EVENT_LATCH 0x2 +#define SLOT_SERR_INT_MASK 0x3 + +static irqreturn_t shpc_isr(int irq, void *dev_id); +static void start_int_poll_timer(struct controller *ctrl, int sec); +static int hpc_check_cmd_status(struct controller *ctrl); + +static inline u8 shpc_readb(struct controller *ctrl, int reg) +{ + return readb(ctrl->creg + reg); +} + +static inline void shpc_writeb(struct controller *ctrl, int reg, u8 val) +{ + writeb(val, ctrl->creg + reg); +} + +static inline u16 shpc_readw(struct controller *ctrl, int reg) +{ + return readw(ctrl->creg + reg); +} + +static inline void shpc_writew(struct controller *ctrl, int reg, u16 val) +{ + writew(val, ctrl->creg + reg); +} + +static inline u32 shpc_readl(struct controller *ctrl, int reg) +{ + return readl(ctrl->creg + reg); +} + +static inline void shpc_writel(struct controller *ctrl, int reg, u32 val) +{ + writel(val, ctrl->creg + reg); +} + +static inline int shpc_indirect_read(struct controller *ctrl, int index, + u32 *value) +{ + int rc; + u32 cap_offset = ctrl->cap_offset; + struct pci_dev *pdev = ctrl->pci_dev; + + rc = pci_write_config_byte(pdev, cap_offset + DWORD_SELECT, index); + if (rc) + return rc; + return pci_read_config_dword(pdev, cap_offset + DWORD_DATA, value); +} + +/* + * This is the interrupt polling timeout function. + */ +static void int_poll_timeout(unsigned long data) +{ + struct controller *ctrl = (struct controller *)data; + + /* Poll for interrupt events. regs == NULL => polling */ + shpc_isr(0, ctrl); + + init_timer(&ctrl->poll_timer); + if (!shpchp_poll_time) + shpchp_poll_time = 2; /* default polling interval is 2 sec */ + + start_int_poll_timer(ctrl, shpchp_poll_time); +} + +/* + * This function starts the interrupt polling timer. + */ +static void start_int_poll_timer(struct controller *ctrl, int sec) +{ + /* Clamp to sane value */ + if ((sec <= 0) || (sec > 60)) + sec = 2; + + ctrl->poll_timer.function = &int_poll_timeout; + ctrl->poll_timer.data = (unsigned long)ctrl; + ctrl->poll_timer.expires = jiffies + sec * HZ; + add_timer(&ctrl->poll_timer); +} + +static inline int is_ctrl_busy(struct controller *ctrl) +{ + u16 cmd_status = shpc_readw(ctrl, CMD_STATUS); + return cmd_status & 0x1; +} + +/* + * Returns 1 if SHPC finishes executing a command within 1 sec, + * otherwise returns 0. + */ +static inline int shpc_poll_ctrl_busy(struct controller *ctrl) +{ + int i; + + if (!is_ctrl_busy(ctrl)) + return 1; + + /* Check every 0.1 sec for a total of 1 sec */ + for (i = 0; i < 10; i++) { + msleep(100); + if (!is_ctrl_busy(ctrl)) + return 1; + } + + return 0; +} + +static inline int shpc_wait_cmd(struct controller *ctrl) +{ + int retval = 0; + unsigned long timeout = msecs_to_jiffies(1000); + int rc; + + if (shpchp_poll_mode) + rc = shpc_poll_ctrl_busy(ctrl); + else + rc = wait_event_interruptible_timeout(ctrl->queue, + !is_ctrl_busy(ctrl), timeout); + if (!rc && is_ctrl_busy(ctrl)) { + retval = -EIO; + ctrl_err(ctrl, "Command not completed in 1000 msec\n"); + } else if (rc < 0) { + retval = -EINTR; + ctrl_info(ctrl, "Command was interrupted by a signal\n"); + } + + return retval; +} + +static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) +{ + struct controller *ctrl = slot->ctrl; + u16 cmd_status; + int retval = 0; + u16 temp_word; + + mutex_lock(&slot->ctrl->cmd_lock); + + if (!shpc_poll_ctrl_busy(ctrl)) { + /* After 1 sec and and the controller is still busy */ + ctrl_err(ctrl, "Controller is still busy after 1 sec\n"); + retval = -EBUSY; + goto out; + } + + ++t_slot; + temp_word = (t_slot << 8) | (cmd & 0xFF); + ctrl_dbg(ctrl, "%s: t_slot %x cmd %x\n", __func__, t_slot, cmd); + + /* To make sure the Controller Busy bit is 0 before we send out the + * command. + */ + shpc_writew(ctrl, CMD, temp_word); + + /* + * Wait for command completion. + */ + retval = shpc_wait_cmd(slot->ctrl); + if (retval) + goto out; + + cmd_status = hpc_check_cmd_status(slot->ctrl); + if (cmd_status) { + ctrl_err(ctrl, "Failed to issued command 0x%x (error code = %d)\n", + cmd, cmd_status); + retval = -EIO; + } + out: + mutex_unlock(&slot->ctrl->cmd_lock); + return retval; +} + +static int hpc_check_cmd_status(struct controller *ctrl) +{ + int retval = 0; + u16 cmd_status = shpc_readw(ctrl, CMD_STATUS) & 0x000F; + + switch (cmd_status >> 1) { + case 0: + retval = 0; + break; + case 1: + retval = SWITCH_OPEN; + ctrl_err(ctrl, "Switch opened!\n"); + break; + case 2: + retval = INVALID_CMD; + ctrl_err(ctrl, "Invalid HPC command!\n"); + break; + case 4: + retval = INVALID_SPEED_MODE; + ctrl_err(ctrl, "Invalid bus speed/mode!\n"); + break; + default: + retval = cmd_status; + } + + return retval; +} + + +static int hpc_get_attention_status(struct slot *slot, u8 *status) +{ + struct controller *ctrl = slot->ctrl; + u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); + u8 state = (slot_reg & ATN_LED_STATE_MASK) >> ATN_LED_STATE_SHIFT; + + switch (state) { + case ATN_LED_STATE_ON: + *status = 1; /* On */ + break; + case ATN_LED_STATE_BLINK: + *status = 2; /* Blink */ + break; + case ATN_LED_STATE_OFF: + *status = 0; /* Off */ + break; + default: + *status = 0xFF; /* Reserved */ + break; + } + + return 0; +} + +static int hpc_get_power_status(struct slot *slot, u8 *status) +{ + struct controller *ctrl = slot->ctrl; + u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); + u8 state = (slot_reg & SLOT_STATE_MASK) >> SLOT_STATE_SHIFT; + + switch (state) { + case SLOT_STATE_PWRONLY: + *status = 2; /* Powered only */ + break; + case SLOT_STATE_ENABLED: + *status = 1; /* Enabled */ + break; + case SLOT_STATE_DISABLED: + *status = 0; /* Disabled */ + break; + default: + *status = 0xFF; /* Reserved */ + break; + } + + return 0; +} + + +static int hpc_get_latch_status(struct slot *slot, u8 *status) +{ + struct controller *ctrl = slot->ctrl; + u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); + + *status = !!(slot_reg & MRL_SENSOR); /* 0 -> close; 1 -> open */ + + return 0; +} + +static int hpc_get_adapter_status(struct slot *slot, u8 *status) +{ + struct controller *ctrl = slot->ctrl; + u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); + u8 state = (slot_reg & PRSNT_MASK) >> PRSNT_SHIFT; + + *status = (state != 0x3) ? 1 : 0; + + return 0; +} + +static int hpc_get_prog_int(struct slot *slot, u8 *prog_int) +{ + struct controller *ctrl = slot->ctrl; + + *prog_int = shpc_readb(ctrl, PROG_INTERFACE); + + return 0; +} + +static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) +{ + int retval = 0; + struct controller *ctrl = slot->ctrl; + u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); + u8 m66_cap = !!(slot_reg & MHZ66_CAP); + u8 pi, pcix_cap; + + retval = hpc_get_prog_int(slot, &pi); + if (retval) + return retval; + + switch (pi) { + case 1: + pcix_cap = (slot_reg & PCIX_CAP_MASK_PI1) >> PCIX_CAP_SHIFT; + break; + case 2: + pcix_cap = (slot_reg & PCIX_CAP_MASK_PI2) >> PCIX_CAP_SHIFT; + break; + default: + return -ENODEV; + } + + ctrl_dbg(ctrl, "%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n", + __func__, slot_reg, pcix_cap, m66_cap); + + switch (pcix_cap) { + case 0x0: + *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; + break; + case 0x1: + *value = PCI_SPEED_66MHz_PCIX; + break; + case 0x3: + *value = PCI_SPEED_133MHz_PCIX; + break; + case 0x4: + *value = PCI_SPEED_133MHz_PCIX_266; + break; + case 0x5: + *value = PCI_SPEED_133MHz_PCIX_533; + break; + case 0x2: + default: + *value = PCI_SPEED_UNKNOWN; + retval = -ENODEV; + break; + } + + ctrl_dbg(ctrl, "Adapter speed = %d\n", *value); + return retval; +} + +static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode) +{ + int retval = 0; + struct controller *ctrl = slot->ctrl; + u16 sec_bus_status = shpc_readw(ctrl, SEC_BUS_CONFIG); + u8 pi = shpc_readb(ctrl, PROG_INTERFACE); + + if (pi == 2) { + *mode = (sec_bus_status & 0x0100) >> 8; + } else { + retval = -1; + } + + ctrl_dbg(ctrl, "Mode 1 ECC cap = %d\n", *mode); + return retval; +} + +static int hpc_query_power_fault(struct slot *slot) +{ + struct controller *ctrl = slot->ctrl; + u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); + + /* Note: Logic 0 => fault */ + return !(slot_reg & POWER_FAULT); +} + +static int hpc_set_attention_status(struct slot *slot, u8 value) +{ + u8 slot_cmd = 0; + + switch (value) { + case 0 : + slot_cmd = SET_ATTN_OFF; /* OFF */ + break; + case 1: + slot_cmd = SET_ATTN_ON; /* ON */ + break; + case 2: + slot_cmd = SET_ATTN_BLINK; /* BLINK */ + break; + default: + return -1; + } + + return shpc_write_cmd(slot, slot->hp_slot, slot_cmd); +} + + +static void hpc_set_green_led_on(struct slot *slot) +{ + shpc_write_cmd(slot, slot->hp_slot, SET_PWR_ON); +} + +static void hpc_set_green_led_off(struct slot *slot) +{ + shpc_write_cmd(slot, slot->hp_slot, SET_PWR_OFF); +} + +static void hpc_set_green_led_blink(struct slot *slot) +{ + shpc_write_cmd(slot, slot->hp_slot, SET_PWR_BLINK); +} + +static void hpc_release_ctlr(struct controller *ctrl) +{ + int i; + u32 slot_reg, serr_int; + + /* + * Mask event interrupts and SERRs of all slots + */ + for (i = 0; i < ctrl->num_slots; i++) { + slot_reg = shpc_readl(ctrl, SLOT_REG(i)); + slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | + BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | + CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK | + CON_PFAULT_SERR_MASK); + slot_reg &= ~SLOT_REG_RSVDZ_MASK; + shpc_writel(ctrl, SLOT_REG(i), slot_reg); + } + + cleanup_slots(ctrl); + + /* + * Mask SERR and System Interrupt generation + */ + serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE); + serr_int |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK | + COMMAND_INTR_MASK | ARBITER_SERR_MASK); + serr_int &= ~SERR_INTR_RSVDZ_MASK; + shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); + + if (shpchp_poll_mode) + del_timer(&ctrl->poll_timer); + else { + free_irq(ctrl->pci_dev->irq, ctrl); + pci_disable_msi(ctrl->pci_dev); + } + + iounmap(ctrl->creg); + release_mem_region(ctrl->mmio_base, ctrl->mmio_size); +} + +static int hpc_power_on_slot(struct slot *slot) +{ + int retval; + + retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR); + if (retval) + ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); + + return retval; +} + +static int hpc_slot_enable(struct slot *slot) +{ + int retval; + + /* Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */ + retval = shpc_write_cmd(slot, slot->hp_slot, + SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF); + if (retval) + ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); + + return retval; +} + +static int hpc_slot_disable(struct slot *slot) +{ + int retval; + + /* Slot - Disable, Power Indicator - Off, Attention Indicator - On */ + retval = shpc_write_cmd(slot, slot->hp_slot, + SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON); + if (retval) + ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); + + return retval; +} + +static int shpc_get_cur_bus_speed(struct controller *ctrl) +{ + int retval = 0; + struct pci_bus *bus = ctrl->pci_dev->subordinate; + enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; + u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG); + u8 pi = shpc_readb(ctrl, PROG_INTERFACE); + u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); + + if ((pi == 1) && (speed_mode > 4)) { + retval = -ENODEV; + goto out; + } + + switch (speed_mode) { + case 0x0: + bus_speed = PCI_SPEED_33MHz; + break; + case 0x1: + bus_speed = PCI_SPEED_66MHz; + break; + case 0x2: + bus_speed = PCI_SPEED_66MHz_PCIX; + break; + case 0x3: + bus_speed = PCI_SPEED_100MHz_PCIX; + break; + case 0x4: + bus_speed = PCI_SPEED_133MHz_PCIX; + break; + case 0x5: + bus_speed = PCI_SPEED_66MHz_PCIX_ECC; + break; + case 0x6: + bus_speed = PCI_SPEED_100MHz_PCIX_ECC; + break; + case 0x7: + bus_speed = PCI_SPEED_133MHz_PCIX_ECC; + break; + case 0x8: + bus_speed = PCI_SPEED_66MHz_PCIX_266; + break; + case 0x9: + bus_speed = PCI_SPEED_100MHz_PCIX_266; + break; + case 0xa: + bus_speed = PCI_SPEED_133MHz_PCIX_266; + break; + case 0xb: + bus_speed = PCI_SPEED_66MHz_PCIX_533; + break; + case 0xc: + bus_speed = PCI_SPEED_100MHz_PCIX_533; + break; + case 0xd: + bus_speed = PCI_SPEED_133MHz_PCIX_533; + break; + default: + retval = -ENODEV; + break; + } + + out: + bus->cur_bus_speed = bus_speed; + dbg("Current bus speed = %d\n", bus_speed); + return retval; +} + + +static int hpc_set_bus_speed_mode(struct slot *slot, enum pci_bus_speed value) +{ + int retval; + struct controller *ctrl = slot->ctrl; + u8 pi, cmd; + + pi = shpc_readb(ctrl, PROG_INTERFACE); + if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX)) + return -EINVAL; + + switch (value) { + case PCI_SPEED_33MHz: + cmd = SETA_PCI_33MHZ; + break; + case PCI_SPEED_66MHz: + cmd = SETA_PCI_66MHZ; + break; + case PCI_SPEED_66MHz_PCIX: + cmd = SETA_PCIX_66MHZ; + break; + case PCI_SPEED_100MHz_PCIX: + cmd = SETA_PCIX_100MHZ; + break; + case PCI_SPEED_133MHz_PCIX: + cmd = SETA_PCIX_133MHZ; + break; + case PCI_SPEED_66MHz_PCIX_ECC: + cmd = SETB_PCIX_66MHZ_EM; + break; + case PCI_SPEED_100MHz_PCIX_ECC: + cmd = SETB_PCIX_100MHZ_EM; + break; + case PCI_SPEED_133MHz_PCIX_ECC: + cmd = SETB_PCIX_133MHZ_EM; + break; + case PCI_SPEED_66MHz_PCIX_266: + cmd = SETB_PCIX_66MHZ_266; + break; + case PCI_SPEED_100MHz_PCIX_266: + cmd = SETB_PCIX_100MHZ_266; + break; + case PCI_SPEED_133MHz_PCIX_266: + cmd = SETB_PCIX_133MHZ_266; + break; + case PCI_SPEED_66MHz_PCIX_533: + cmd = SETB_PCIX_66MHZ_533; + break; + case PCI_SPEED_100MHz_PCIX_533: + cmd = SETB_PCIX_100MHZ_533; + break; + case PCI_SPEED_133MHz_PCIX_533: + cmd = SETB_PCIX_133MHZ_533; + break; + default: + return -EINVAL; + } + + retval = shpc_write_cmd(slot, 0, cmd); + if (retval) + ctrl_err(ctrl, "%s: Write command failed!\n", __func__); + else + shpc_get_cur_bus_speed(ctrl); + + return retval; +} + +static irqreturn_t shpc_isr(int irq, void *dev_id) +{ + struct controller *ctrl = (struct controller *)dev_id; + u32 serr_int, slot_reg, intr_loc, intr_loc2; + int hp_slot; + + /* Check to see if it was our interrupt */ + intr_loc = shpc_readl(ctrl, INTR_LOC); + if (!intr_loc) + return IRQ_NONE; + + ctrl_dbg(ctrl, "%s: intr_loc = %x\n", __func__, intr_loc); + + if (!shpchp_poll_mode) { + /* + * Mask Global Interrupt Mask - see implementation + * note on p. 139 of SHPC spec rev 1.0 + */ + serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE); + serr_int |= GLOBAL_INTR_MASK; + serr_int &= ~SERR_INTR_RSVDZ_MASK; + shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); + + intr_loc2 = shpc_readl(ctrl, INTR_LOC); + ctrl_dbg(ctrl, "%s: intr_loc2 = %x\n", __func__, intr_loc2); + } + + if (intr_loc & CMD_INTR_PENDING) { + /* + * Command Complete Interrupt Pending + * RO only - clear by writing 1 to the Command Completion + * Detect bit in Controller SERR-INT register + */ + serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE); + serr_int &= ~SERR_INTR_RSVDZ_MASK; + shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); + + wake_up_interruptible(&ctrl->queue); + } + + if (!(intr_loc & ~CMD_INTR_PENDING)) + goto out; + + for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { + /* To find out which slot has interrupt pending */ + if (!(intr_loc & SLOT_INTR_PENDING(hp_slot))) + continue; + + slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); + ctrl_dbg(ctrl, "Slot %x with intr, slot register = %x\n", + hp_slot, slot_reg); + + if (slot_reg & MRL_CHANGE_DETECTED) + shpchp_handle_switch_change(hp_slot, ctrl); + + if (slot_reg & BUTTON_PRESS_DETECTED) + shpchp_handle_attention_button(hp_slot, ctrl); + + if (slot_reg & PRSNT_CHANGE_DETECTED) + shpchp_handle_presence_change(hp_slot, ctrl); + + if (slot_reg & (ISO_PFAULT_DETECTED | CON_PFAULT_DETECTED)) + shpchp_handle_power_fault(hp_slot, ctrl); + + /* Clear all slot events */ + slot_reg &= ~SLOT_REG_RSVDZ_MASK; + shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg); + } + out: + if (!shpchp_poll_mode) { + /* Unmask Global Interrupt Mask */ + serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE); + serr_int &= ~(GLOBAL_INTR_MASK | SERR_INTR_RSVDZ_MASK); + shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); + } + + return IRQ_HANDLED; +} + +static int shpc_get_max_bus_speed(struct controller *ctrl) +{ + int retval = 0; + struct pci_bus *bus = ctrl->pci_dev->subordinate; + enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; + u8 pi = shpc_readb(ctrl, PROG_INTERFACE); + u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1); + u32 slot_avail2 = shpc_readl(ctrl, SLOT_AVAIL2); + + if (pi == 2) { + if (slot_avail2 & SLOT_133MHZ_PCIX_533) + bus_speed = PCI_SPEED_133MHz_PCIX_533; + else if (slot_avail2 & SLOT_100MHZ_PCIX_533) + bus_speed = PCI_SPEED_100MHz_PCIX_533; + else if (slot_avail2 & SLOT_66MHZ_PCIX_533) + bus_speed = PCI_SPEED_66MHz_PCIX_533; + else if (slot_avail2 & SLOT_133MHZ_PCIX_266) + bus_speed = PCI_SPEED_133MHz_PCIX_266; + else if (slot_avail2 & SLOT_100MHZ_PCIX_266) + bus_speed = PCI_SPEED_100MHz_PCIX_266; + else if (slot_avail2 & SLOT_66MHZ_PCIX_266) + bus_speed = PCI_SPEED_66MHz_PCIX_266; + } + + if (bus_speed == PCI_SPEED_UNKNOWN) { + if (slot_avail1 & SLOT_133MHZ_PCIX) + bus_speed = PCI_SPEED_133MHz_PCIX; + else if (slot_avail1 & SLOT_100MHZ_PCIX) + bus_speed = PCI_SPEED_100MHz_PCIX; + else if (slot_avail1 & SLOT_66MHZ_PCIX) + bus_speed = PCI_SPEED_66MHz_PCIX; + else if (slot_avail2 & SLOT_66MHZ) + bus_speed = PCI_SPEED_66MHz; + else if (slot_avail1 & SLOT_33MHZ) + bus_speed = PCI_SPEED_33MHz; + else + retval = -ENODEV; + } + + bus->max_bus_speed = bus_speed; + ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed); + + return retval; +} + +static struct hpc_ops shpchp_hpc_ops = { + .power_on_slot = hpc_power_on_slot, + .slot_enable = hpc_slot_enable, + .slot_disable = hpc_slot_disable, + .set_bus_speed_mode = hpc_set_bus_speed_mode, + .set_attention_status = hpc_set_attention_status, + .get_power_status = hpc_get_power_status, + .get_attention_status = hpc_get_attention_status, + .get_latch_status = hpc_get_latch_status, + .get_adapter_status = hpc_get_adapter_status, + + .get_adapter_speed = hpc_get_adapter_speed, + .get_mode1_ECC_cap = hpc_get_mode1_ECC_cap, + .get_prog_int = hpc_get_prog_int, + + .query_power_fault = hpc_query_power_fault, + .green_led_on = hpc_set_green_led_on, + .green_led_off = hpc_set_green_led_off, + .green_led_blink = hpc_set_green_led_blink, + + .release_ctlr = hpc_release_ctlr, +}; + +int shpc_init(struct controller *ctrl, struct pci_dev *pdev) +{ + int rc = -1, num_slots = 0; + u8 hp_slot; + u32 shpc_base_offset; + u32 tempdword, slot_reg, slot_config; + u8 i; + + ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */ + ctrl_dbg(ctrl, "Hotplug Controller:\n"); + + if (pdev->vendor == PCI_VENDOR_ID_AMD && + pdev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) { + /* amd shpc driver doesn't use Base Offset; assume 0 */ + ctrl->mmio_base = pci_resource_start(pdev, 0); + ctrl->mmio_size = pci_resource_len(pdev, 0); + } else { + ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC); + if (!ctrl->cap_offset) { + ctrl_err(ctrl, "Cannot find PCI capability\n"); + goto abort; + } + ctrl_dbg(ctrl, " cap_offset = %x\n", ctrl->cap_offset); + + rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset); + if (rc) { + ctrl_err(ctrl, "Cannot read base_offset\n"); + goto abort; + } + + rc = shpc_indirect_read(ctrl, 3, &tempdword); + if (rc) { + ctrl_err(ctrl, "Cannot read slot config\n"); + goto abort; + } + num_slots = tempdword & SLOT_NUM; + ctrl_dbg(ctrl, " num_slots (indirect) %x\n", num_slots); + + for (i = 0; i < 9 + num_slots; i++) { + rc = shpc_indirect_read(ctrl, i, &tempdword); + if (rc) { + ctrl_err(ctrl, "Cannot read creg (index = %d)\n", + i); + goto abort; + } + ctrl_dbg(ctrl, " offset %d: value %x\n", i, tempdword); + } + + ctrl->mmio_base = + pci_resource_start(pdev, 0) + shpc_base_offset; + ctrl->mmio_size = 0x24 + 0x4 * num_slots; + } + + ctrl_info(ctrl, "HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", + pdev->vendor, pdev->device, pdev->subsystem_vendor, + pdev->subsystem_device); + + rc = pci_enable_device(pdev); + if (rc) { + ctrl_err(ctrl, "pci_enable_device failed\n"); + goto abort; + } + + if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) { + ctrl_err(ctrl, "Cannot reserve MMIO region\n"); + rc = -1; + goto abort; + } + + ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size); + if (!ctrl->creg) { + ctrl_err(ctrl, "Cannot remap MMIO region %lx @ %lx\n", + ctrl->mmio_size, ctrl->mmio_base); + release_mem_region(ctrl->mmio_base, ctrl->mmio_size); + rc = -1; + goto abort; + } + ctrl_dbg(ctrl, "ctrl->creg %p\n", ctrl->creg); + + mutex_init(&ctrl->crit_sect); + mutex_init(&ctrl->cmd_lock); + + /* Setup wait queue */ + init_waitqueue_head(&ctrl->queue); + + ctrl->hpc_ops = &shpchp_hpc_ops; + + /* Return PCI Controller Info */ + slot_config = shpc_readl(ctrl, SLOT_CONFIG); + ctrl->slot_device_offset = (slot_config & FIRST_DEV_NUM) >> 8; + ctrl->num_slots = slot_config & SLOT_NUM; + ctrl->first_slot = (slot_config & PSN) >> 16; + ctrl->slot_num_inc = ((slot_config & UPDOWN) >> 29) ? 1 : -1; + + /* Mask Global Interrupt Mask & Command Complete Interrupt Mask */ + tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); + ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword); + tempdword |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK | + COMMAND_INTR_MASK | ARBITER_SERR_MASK); + tempdword &= ~SERR_INTR_RSVDZ_MASK; + shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword); + tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); + ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword); + + /* Mask the MRL sensor SERR Mask of individual slot in + * Slot SERR-INT Mask & clear all the existing event if any + */ + for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { + slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); + ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n", + hp_slot, slot_reg); + slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | + BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | + CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK | + CON_PFAULT_SERR_MASK); + slot_reg &= ~SLOT_REG_RSVDZ_MASK; + shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg); + } + + if (shpchp_poll_mode) { + /* Install interrupt polling timer. Start with 10 sec delay */ + init_timer(&ctrl->poll_timer); + start_int_poll_timer(ctrl, 10); + } else { + /* Installs the interrupt handler */ + rc = pci_enable_msi(pdev); + if (rc) { + ctrl_info(ctrl, "Can't get msi for the hotplug controller\n"); + ctrl_info(ctrl, "Use INTx for the hotplug controller\n"); + } + + rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED, + MY_NAME, (void *)ctrl); + ctrl_dbg(ctrl, "request_irq %d (returns %d)\n", + ctrl->pci_dev->irq, rc); + if (rc) { + ctrl_err(ctrl, "Can't get irq %d for the hotplug controller\n", + ctrl->pci_dev->irq); + goto abort_iounmap; + } + } + ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq); + + shpc_get_max_bus_speed(ctrl); + shpc_get_cur_bus_speed(ctrl); + + /* + * Unmask all event interrupts of all slots + */ + for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { + slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); + ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n", + hp_slot, slot_reg); + slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | + BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | + CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK); + shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg); + } + if (!shpchp_poll_mode) { + /* Unmask all general input interrupts and SERR */ + tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); + tempdword &= ~(GLOBAL_INTR_MASK | COMMAND_INTR_MASK | + SERR_INTR_RSVDZ_MASK); + shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword); + tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); + ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword); + } + + return 0; + + /* We end up here for the many possible ways to fail this API. */ +abort_iounmap: + iounmap(ctrl->creg); +abort: + return rc; +}