X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fpci%2Fhotplug%2Fpciehp_pci.c;fp=kernel%2Fdrivers%2Fpci%2Fhotplug%2Fpciehp_pci.c;h=9e69403be6327156c0a7a95fa8ce5b422aa60cb9;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git

diff --git a/kernel/drivers/pci/hotplug/pciehp_pci.c b/kernel/drivers/pci/hotplug/pciehp_pci.c
new file mode 100644
index 000000000..9e69403be
--- /dev/null
+++ b/kernel/drivers/pci/hotplug/pciehp_pci.c
@@ -0,0 +1,128 @@
+/*
+ * PCI Express Hot Plug Controller Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ * Copyright (C) 2003-2004 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include "../pci.h"
+#include "pciehp.h"
+
+int pciehp_configure_device(struct slot *p_slot)
+{
+	struct pci_dev *dev;
+	struct pci_dev *bridge = p_slot->ctrl->pcie->port;
+	struct pci_bus *parent = bridge->subordinate;
+	int num, ret = 0;
+	struct controller *ctrl = p_slot->ctrl;
+
+	pci_lock_rescan_remove();
+
+	dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
+	if (dev) {
+		ctrl_err(ctrl, "Device %s already exists at %04x:%02x:00, cannot hot-add\n",
+			 pci_name(dev), pci_domain_nr(parent), parent->number);
+		pci_dev_put(dev);
+		ret = -EEXIST;
+		goto out;
+	}
+
+	num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
+	if (num == 0) {
+		ctrl_err(ctrl, "No new device found\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	list_for_each_entry(dev, &parent->devices, bus_list)
+		if (pci_is_bridge(dev))
+			pci_hp_add_bridge(dev);
+
+	pci_assign_unassigned_bridge_resources(bridge);
+	pcie_bus_configure_settings(parent);
+	pci_bus_add_devices(parent);
+
+ out:
+	pci_unlock_rescan_remove();
+	return ret;
+}
+
+int pciehp_unconfigure_device(struct slot *p_slot)
+{
+	int rc = 0;
+	u8 bctl = 0;
+	u8 presence = 0;
+	struct pci_dev *dev, *temp;
+	struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
+	u16 command;
+	struct controller *ctrl = p_slot->ctrl;
+
+	ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
+		 __func__, pci_domain_nr(parent), parent->number);
+	pciehp_get_adapter_status(p_slot, &presence);
+
+	pci_lock_rescan_remove();
+
+	/*
+	 * Stopping an SR-IOV PF device removes all the associated VFs,
+	 * which will update the bus->devices list and confuse the
+	 * iterator.  Therefore, iterate in reverse so we remove the VFs
+	 * first, then the PF.  We do the same in pci_stop_bus_device().
+	 */
+	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
+					 bus_list) {
+		pci_dev_get(dev);
+		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
+			pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl);
+			if (bctl & PCI_BRIDGE_CTL_VGA) {
+				ctrl_err(ctrl,
+					 "Cannot remove display device %s\n",
+					 pci_name(dev));
+				pci_dev_put(dev);
+				rc = -EINVAL;
+				break;
+			}
+		}
+		pci_stop_and_remove_bus_device(dev);
+		/*
+		 * Ensure that no new Requests will be generated from
+		 * the device.
+		 */
+		if (presence) {
+			pci_read_config_word(dev, PCI_COMMAND, &command);
+			command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
+			command |= PCI_COMMAND_INTX_DISABLE;
+			pci_write_config_word(dev, PCI_COMMAND, command);
+		}
+		pci_dev_put(dev);
+	}
+
+	pci_unlock_rescan_remove();
+	return rc;
+}