X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fnet%2Fwireless%2Fath%2Fath10k%2Fhw.h;h=713c2bcea17825f701b2be37a9cf82badef11caf;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=460771fcfe9ea8507f3316910f9815a2281c632d;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/kernel/drivers/net/wireless/ath/ath10k/hw.h b/kernel/drivers/net/wireless/ath/ath10k/hw.h
index 460771fcf..713c2bcea 100644
--- a/kernel/drivers/net/wireless/ath/ath10k/hw.h
+++ b/kernel/drivers/net/wireless/ath/ath10k/hw.h
@@ -22,6 +22,12 @@
 
 #define ATH10K_FW_DIR			"ath10k"
 
+#define QCA988X_2_0_DEVICE_ID   (0x003c)
+#define QCA6164_2_1_DEVICE_ID   (0x0041)
+#define QCA6174_2_1_DEVICE_ID   (0x003e)
+#define QCA99X0_2_0_DEVICE_ID   (0x0040)
+#define QCA9377_1_0_DEVICE_ID   (0x0042)
+
 /* QCA988X 1.0 definitions (unsupported) */
 #define QCA988X_HW_1_0_CHIP_ID_REV	0x0
 
@@ -42,6 +48,10 @@
 #define QCA6174_HW_3_0_VERSION		0x05020000
 #define QCA6174_HW_3_2_VERSION		0x05030000
 
+/* QCA9377 target BMI version signatures */
+#define QCA9377_HW_1_0_DEV_VERSION	0x05020000
+#define QCA9377_HW_1_1_DEV_VERSION	0x05020001
+
 enum qca6174_pci_rev {
 	QCA6174_PCI_REV_1_1 = 0x11,
 	QCA6174_PCI_REV_1_3 = 0x13,
@@ -60,6 +70,11 @@ enum qca6174_chip_id_rev {
 	QCA6174_HW_3_2_CHIP_ID_REV = 10,
 };
 
+enum qca9377_chip_id_rev {
+	QCA9377_HW_1_0_CHIP_ID_REV = 0x0,
+	QCA9377_HW_1_1_CHIP_ID_REV = 0x1,
+};
+
 #define QCA6174_HW_2_1_FW_DIR		"ath10k/QCA6174/hw2.1"
 #define QCA6174_HW_2_1_FW_FILE		"firmware.bin"
 #define QCA6174_HW_2_1_OTP_FILE		"otp.bin"
@@ -72,16 +87,42 @@ enum qca6174_chip_id_rev {
 #define QCA6174_HW_3_0_BOARD_DATA_FILE	"board.bin"
 #define QCA6174_HW_3_0_PATCH_LOAD_ADDR	0x1234
 
+/* QCA99X0 1.0 definitions (unsupported) */
+#define QCA99X0_HW_1_0_CHIP_ID_REV     0x0
+
+/* QCA99X0 2.0 definitions */
+#define QCA99X0_HW_2_0_DEV_VERSION     0x01000000
+#define QCA99X0_HW_2_0_CHIP_ID_REV     0x1
+#define QCA99X0_HW_2_0_FW_DIR          ATH10K_FW_DIR "/QCA99X0/hw2.0"
+#define QCA99X0_HW_2_0_FW_FILE         "firmware.bin"
+#define QCA99X0_HW_2_0_OTP_FILE        "otp.bin"
+#define QCA99X0_HW_2_0_BOARD_DATA_FILE "board.bin"
+#define QCA99X0_HW_2_0_PATCH_LOAD_ADDR	0x1234
+
+/* QCA9377 1.0 definitions */
+#define QCA9377_HW_1_0_FW_DIR          ATH10K_FW_DIR "/QCA9377/hw1.0"
+#define QCA9377_HW_1_0_FW_FILE         "firmware.bin"
+#define QCA9377_HW_1_0_OTP_FILE        "otp.bin"
+#define QCA9377_HW_1_0_BOARD_DATA_FILE "board.bin"
+#define QCA9377_HW_1_0_PATCH_LOAD_ADDR	0x1234
+
 #define ATH10K_FW_API2_FILE		"firmware-2.bin"
 #define ATH10K_FW_API3_FILE		"firmware-3.bin"
 
 /* added support for ATH10K_FW_IE_WMI_OP_VERSION */
 #define ATH10K_FW_API4_FILE		"firmware-4.bin"
 
+/* HTT id conflict fix for management frames over HTT */
+#define ATH10K_FW_API5_FILE		"firmware-5.bin"
+
 #define ATH10K_FW_UTF_FILE		"utf.bin"
+#define ATH10K_FW_UTF_API2_FILE		"utf-2.bin"
 
 /* includes also the null byte */
 #define ATH10K_FIRMWARE_MAGIC               "QCA-ATH10K"
+#define ATH10K_BOARD_MAGIC                  "QCA-ATH10K-BOARD"
+
+#define ATH10K_BOARD_API2_FILE         "board-2.bin"
 
 #define REG_DUMP_COUNT_QCA988X 60
 
@@ -104,6 +145,14 @@ enum ath10k_fw_ie_type {
 	 * FW API 4 and above.
 	 */
 	ATH10K_FW_IE_WMI_OP_VERSION = 5,
+
+	/* HTT "operations" interface version, 32 bit value. Supported from
+	 * FW API 5 and above.
+	 */
+	ATH10K_FW_IE_HTT_OP_VERSION = 6,
+
+	/* Code swap image for firmware binary */
+	ATH10K_FW_IE_FW_CODE_SWAP_IMAGE = 7,
 };
 
 enum ath10k_fw_wmi_op_version {
@@ -114,14 +163,43 @@ enum ath10k_fw_wmi_op_version {
 	ATH10K_FW_WMI_OP_VERSION_10_2 = 3,
 	ATH10K_FW_WMI_OP_VERSION_TLV = 4,
 	ATH10K_FW_WMI_OP_VERSION_10_2_4 = 5,
+	ATH10K_FW_WMI_OP_VERSION_10_4 = 6,
 
 	/* keep last */
 	ATH10K_FW_WMI_OP_VERSION_MAX,
 };
 
+enum ath10k_fw_htt_op_version {
+	ATH10K_FW_HTT_OP_VERSION_UNSET = 0,
+
+	ATH10K_FW_HTT_OP_VERSION_MAIN = 1,
+
+	/* also used in 10.2 and 10.2.4 branches */
+	ATH10K_FW_HTT_OP_VERSION_10_1 = 2,
+
+	ATH10K_FW_HTT_OP_VERSION_TLV = 3,
+
+	ATH10K_FW_HTT_OP_VERSION_10_4 = 4,
+
+	/* keep last */
+	ATH10K_FW_HTT_OP_VERSION_MAX,
+};
+
+enum ath10k_bd_ie_type {
+	/* contains sub IEs of enum ath10k_bd_ie_board_type */
+	ATH10K_BD_IE_BOARD = 0,
+};
+
+enum ath10k_bd_ie_board_type {
+	ATH10K_BD_IE_BOARD_NAME = 0,
+	ATH10K_BD_IE_BOARD_DATA = 1,
+};
+
 enum ath10k_hw_rev {
 	ATH10K_HW_QCA988X,
 	ATH10K_HW_QCA6174,
+	ATH10K_HW_QCA99X0,
+	ATH10K_HW_QCA9377,
 };
 
 struct ath10k_hw_regs {
@@ -142,23 +220,51 @@ struct ath10k_hw_regs {
 	u32 soc_reset_control_ce_rst_mask;
 	u32 soc_chip_id_address;
 	u32 scratch_3_address;
+	u32 fw_indicator_address;
+	u32 pcie_local_base_address;
+	u32 ce_wrap_intr_sum_host_msi_lsb;
+	u32 ce_wrap_intr_sum_host_msi_mask;
+	u32 pcie_intr_fw_mask;
+	u32 pcie_intr_ce_mask_all;
+	u32 pcie_intr_clr_address;
 };
 
 extern const struct ath10k_hw_regs qca988x_regs;
 extern const struct ath10k_hw_regs qca6174_regs;
+extern const struct ath10k_hw_regs qca99x0_regs;
+
+struct ath10k_hw_values {
+	u32 rtc_state_val_on;
+	u8 ce_count;
+	u8 msi_assign_ce_max;
+	u8 num_target_ce_config_wlan;
+	u16 ce_desc_meta_data_mask;
+	u8 ce_desc_meta_data_lsb;
+};
+
+extern const struct ath10k_hw_values qca988x_values;
+extern const struct ath10k_hw_values qca6174_values;
+extern const struct ath10k_hw_values qca99x0_values;
+
+void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
+				u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev);
 
 #define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X)
 #define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174)
+#define QCA_REV_99X0(ar) ((ar)->hw_rev == ATH10K_HW_QCA99X0)
+#define QCA_REV_9377(ar) ((ar)->hw_rev == ATH10K_HW_QCA9377)
 
 /* Known pecularities:
- *  - current FW doesn't support raw rx mode (last tested v599)
- *  - current FW dumps upon raw tx mode (last tested v599)
  *  - raw appears in nwifi decap, raw and nwifi appear in ethernet decap
  *  - raw have FCS, nwifi doesn't
  *  - ethernet frames have 802.11 header decapped and parts (base hdr, cipher
  *    param, llc/snap) are aligned to 4byte boundaries each */
 enum ath10k_hw_txrx_mode {
 	ATH10K_HW_TXRX_RAW = 0,
+
+	/* Native Wifi decap mode is used to align IP frames to 4-byte
+	 * boundaries and avoid a very expensive re-alignment in mac80211.
+	 */
 	ATH10K_HW_TXRX_NATIVE_WIFI = 1,
 	ATH10K_HW_TXRX_ETHERNET = 2,
 
@@ -180,6 +286,27 @@ struct ath10k_pktlog_hdr {
 	u8 payload[0];
 } __packed;
 
+enum ath10k_hw_rate_ofdm {
+	ATH10K_HW_RATE_OFDM_48M = 0,
+	ATH10K_HW_RATE_OFDM_24M,
+	ATH10K_HW_RATE_OFDM_12M,
+	ATH10K_HW_RATE_OFDM_6M,
+	ATH10K_HW_RATE_OFDM_54M,
+	ATH10K_HW_RATE_OFDM_36M,
+	ATH10K_HW_RATE_OFDM_18M,
+	ATH10K_HW_RATE_OFDM_9M,
+};
+
+enum ath10k_hw_rate_cck {
+	ATH10K_HW_RATE_CCK_LP_11M = 0,
+	ATH10K_HW_RATE_CCK_LP_5_5M,
+	ATH10K_HW_RATE_CCK_LP_2M,
+	ATH10K_HW_RATE_CCK_LP_1M,
+	ATH10K_HW_RATE_CCK_SP_11M,
+	ATH10K_HW_RATE_CCK_SP_5_5M,
+	ATH10K_HW_RATE_CCK_SP_2M,
+};
+
 /* Target specific defines for MAIN firmware */
 #define TARGET_NUM_VDEVS			8
 #define TARGET_NUM_PEER_AST			2
@@ -199,10 +326,6 @@ struct ath10k_pktlog_hdr {
 #define TARGET_RX_TIMEOUT_LO_PRI		100
 #define TARGET_RX_TIMEOUT_HI_PRI		40
 
-/* Native Wifi decap mode is used to align IP frames to 4-byte boundaries and
- * avoid a very expensive re-alignment in mac80211. */
-#define TARGET_RX_DECAP_MODE			ATH10K_HW_TXRX_NATIVE_WIFI
-
 #define TARGET_SCAN_MAX_PENDING_REQS		4
 #define TARGET_BMISS_OFFLOAD_MAX_VDEV		3
 #define TARGET_ROAM_OFFLOAD_MAX_VDEV		3
@@ -223,7 +346,7 @@ struct ath10k_pktlog_hdr {
 #define TARGET_10X_NUM_WDS_ENTRIES		32
 #define TARGET_10X_DMA_BURST_SIZE		0
 #define TARGET_10X_MAC_AGGR_DELIM		0
-#define TARGET_10X_AST_SKID_LIMIT		16
+#define TARGET_10X_AST_SKID_LIMIT		128
 #define TARGET_10X_NUM_STATIONS			128
 #define TARGET_10X_NUM_PEERS			((TARGET_10X_NUM_STATIONS) + \
 						 (TARGET_10X_NUM_VDEVS))
@@ -237,7 +360,6 @@ struct ath10k_pktlog_hdr {
 #define TARGET_10X_RX_CHAIN_MASK		(BIT(0) | BIT(1) | BIT(2))
 #define TARGET_10X_RX_TIMEOUT_LO_PRI		100
 #define TARGET_10X_RX_TIMEOUT_HI_PRI		40
-#define TARGET_10X_RX_DECAP_MODE		ATH10K_HW_TXRX_NATIVE_WIFI
 #define TARGET_10X_SCAN_MAX_PENDING_REQS	4
 #define TARGET_10X_BMISS_OFFLOAD_MAX_VDEV	2
 #define TARGET_10X_ROAM_OFFLOAD_MAX_VDEV	2
@@ -253,29 +375,81 @@ struct ath10k_pktlog_hdr {
 #define TARGET_10X_MAX_FRAG_ENTRIES		0
 
 /* 10.2 parameters */
-#define TARGET_10_2_DMA_BURST_SIZE		1
+#define TARGET_10_2_DMA_BURST_SIZE		0
 
 /* Target specific defines for WMI-TLV firmware */
-#define TARGET_TLV_NUM_VDEVS			3
+#define TARGET_TLV_NUM_VDEVS			4
 #define TARGET_TLV_NUM_STATIONS			32
-#define TARGET_TLV_NUM_PEERS			((TARGET_TLV_NUM_STATIONS) + \
-						 (TARGET_TLV_NUM_VDEVS) + \
-						 2)
+#define TARGET_TLV_NUM_PEERS			35
+#define TARGET_TLV_NUM_TDLS_VDEVS		1
 #define TARGET_TLV_NUM_TIDS			((TARGET_TLV_NUM_PEERS) * 2)
 #define TARGET_TLV_NUM_MSDU_DESC		(1024 + 32)
+#define TARGET_TLV_NUM_WOW_PATTERNS		22
+
+/* Diagnostic Window */
+#define CE_DIAG_PIPE	7
+
+#define NUM_TARGET_CE_CONFIG_WLAN ar->hw_values->num_target_ce_config_wlan
+
+/* Target specific defines for 10.4 firmware */
+#define TARGET_10_4_NUM_VDEVS			16
+#define TARGET_10_4_NUM_STATIONS		32
+#define TARGET_10_4_NUM_PEERS			((TARGET_10_4_NUM_STATIONS) + \
+						 (TARGET_10_4_NUM_VDEVS))
+#define TARGET_10_4_ACTIVE_PEERS		0
+
+#define TARGET_10_4_NUM_QCACHE_PEERS_MAX	512
+#define TARGET_10_4_QCACHE_ACTIVE_PEERS		50
+#define TARGET_10_4_NUM_OFFLOAD_PEERS		0
+#define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS	0
+#define TARGET_10_4_NUM_PEER_KEYS		2
+#define TARGET_10_4_TGT_NUM_TIDS		((TARGET_10_4_NUM_PEERS) * 2)
+#define TARGET_10_4_AST_SKID_LIMIT		32
+#define TARGET_10_4_TX_CHAIN_MASK		(BIT(0) | BIT(1) | \
+						 BIT(2) | BIT(3))
+#define TARGET_10_4_RX_CHAIN_MASK		(BIT(0) | BIT(1) | \
+						 BIT(2) | BIT(3))
+
+/* 100 ms for video, best-effort, and background */
+#define TARGET_10_4_RX_TIMEOUT_LO_PRI		100
+
+/* 40 ms for voice */
+#define TARGET_10_4_RX_TIMEOUT_HI_PRI		40
+
+#define TARGET_10_4_RX_DECAP_MODE		ATH10K_HW_TXRX_NATIVE_WIFI
+#define TARGET_10_4_SCAN_MAX_REQS		4
+#define TARGET_10_4_BMISS_OFFLOAD_MAX_VDEV	3
+#define TARGET_10_4_ROAM_OFFLOAD_MAX_VDEV	3
+#define TARGET_10_4_ROAM_OFFLOAD_MAX_PROFILES   8
+
+/* Note: mcast to ucast is disabled by default */
+#define TARGET_10_4_NUM_MCAST_GROUPS		0
+#define TARGET_10_4_NUM_MCAST_TABLE_ELEMS	0
+#define TARGET_10_4_MCAST2UCAST_MODE		0
+
+#define TARGET_10_4_TX_DBG_LOG_SIZE		1024
+#define TARGET_10_4_NUM_WDS_ENTRIES		32
+#define TARGET_10_4_DMA_BURST_SIZE		0
+#define TARGET_10_4_MAC_AGGR_DELIM		0
+#define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
+#define TARGET_10_4_VOW_CONFIG			0
+#define TARGET_10_4_GTK_OFFLOAD_MAX_VDEV	3
+#define TARGET_10_4_NUM_MSDU_DESC		(1024 + 400)
+#define TARGET_10_4_11AC_TX_MAX_FRAGS		2
+#define TARGET_10_4_MAX_PEER_EXT_STATS		16
+#define TARGET_10_4_SMART_ANT_CAP		0
+#define TARGET_10_4_BK_MIN_FREE			0
+#define TARGET_10_4_BE_MIN_FREE			0
+#define TARGET_10_4_VI_MIN_FREE			0
+#define TARGET_10_4_VO_MIN_FREE			0
+#define TARGET_10_4_RX_BATCH_MODE		1
+#define TARGET_10_4_THERMAL_THROTTLING_CONFIG	0
+#define TARGET_10_4_ATF_CONFIG			0
+#define TARGET_10_4_IPHDR_PAD_CONFIG		1
+#define TARGET_10_4_QWRAP_CONFIG		0
 
 /* Number of Copy Engines supported */
-#define CE_COUNT 8
-
-/*
- * Total number of PCIe MSI interrupts requested for all interrupt sources.
- * PCIe standard forces this to be a power of 2.
- * Some Host OS's limit MSI requests that can be granted to 8
- * so for now we abide by this limit and avoid requesting more
- * than that.
- */
-#define MSI_NUM_REQUEST_LOG2	3
-#define MSI_NUM_REQUEST		(1<<MSI_NUM_REQUEST_LOG2)
+#define CE_COUNT ar->hw_values->ce_count
 
 /*
  * Granted MSIs are assigned as follows:
@@ -289,10 +463,10 @@ struct ath10k_pktlog_hdr {
 
 /* MSIs for Copy Engines */
 #define MSI_ASSIGN_CE_INITIAL	1
-#define MSI_ASSIGN_CE_MAX	7
+#define MSI_ASSIGN_CE_MAX	ar->hw_values->msi_assign_ce_max
 
 /* as of IP3.7.1 */
-#define RTC_STATE_V_ON				3
+#define RTC_STATE_V_ON				ar->hw_values->rtc_state_val_on
 
 #define RTC_STATE_COLD_RESET_MASK		ar->regs->rtc_state_cold_reset_mask
 #define RTC_STATE_V_LSB				0
@@ -328,7 +502,7 @@ struct ath10k_pktlog_hdr {
 #define CE7_BASE_ADDRESS			ar->regs->ce7_base_address
 #define DBI_BASE_ADDRESS			0x00060000
 #define WLAN_ANALOG_INTF_PCIE_BASE_ADDRESS	0x0006c000
-#define PCIE_LOCAL_BASE_ADDRESS			0x00080000
+#define PCIE_LOCAL_BASE_ADDRESS		ar->regs->pcie_local_base_address
 
 #define SOC_RESET_CONTROL_ADDRESS		0x00000000
 #define SOC_RESET_CONTROL_OFFSET		0x00000000
@@ -402,21 +576,25 @@ struct ath10k_pktlog_hdr {
 #define CORE_CTRL_ADDRESS			0x0000
 #define PCIE_INTR_ENABLE_ADDRESS		0x0008
 #define PCIE_INTR_CAUSE_ADDRESS			0x000c
-#define PCIE_INTR_CLR_ADDRESS			0x0014
+#define PCIE_INTR_CLR_ADDRESS			ar->regs->pcie_intr_clr_address
 #define SCRATCH_3_ADDRESS			ar->regs->scratch_3_address
 #define CPU_INTR_ADDRESS			0x0010
 
+#define CCNT_TO_MSEC(ar, x) ((x) / ar->hw_params.channel_counters_freq_hz)
+
 /* Firmware indications to the Host via SCRATCH_3 register. */
-#define FW_INDICATOR_ADDRESS	(SOC_CORE_BASE_ADDRESS + SCRATCH_3_ADDRESS)
+#define FW_INDICATOR_ADDRESS			ar->regs->fw_indicator_address
 #define FW_IND_EVENT_PENDING			1
 #define FW_IND_INITIALIZED			2
 
 /* HOST_REG interrupt from firmware */
-#define PCIE_INTR_FIRMWARE_MASK			0x00000400
-#define PCIE_INTR_CE_MASK_ALL			0x0007f800
+#define PCIE_INTR_FIRMWARE_MASK			ar->regs->pcie_intr_fw_mask
+#define PCIE_INTR_CE_MASK_ALL			ar->regs->pcie_intr_ce_mask_all
 
 #define DRAM_BASE_ADDRESS			0x00400000
 
+#define PCIE_BAR_REG_ADDRESS			0x40030
+
 #define MISSING 0
 
 #define SYSTEM_SLEEP_OFFSET			SOC_SYSTEM_SLEEP_OFFSET