X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fnet%2Fethernet%2Fchelsio%2Fcxgb4%2Ft4_hw.c;fp=kernel%2Fdrivers%2Fnet%2Fethernet%2Fchelsio%2Fcxgb4%2Ft4_hw.c;h=e8578a742f2a29b14a2eaec01216a8e47a68e12a;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/kernel/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c new file mode 100644 index 000000000..e8578a742 --- /dev/null +++ b/kernel/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -0,0 +1,5719 @@ +/* + * This file is part of the Chelsio T4 Ethernet driver for Linux. + * + * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include "cxgb4.h" +#include "t4_regs.h" +#include "t4_values.h" +#include "t4fw_api.h" + +/** + * t4_wait_op_done_val - wait until an operation is completed + * @adapter: the adapter performing the operation + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * @valp: where to store the value of the register at completion time + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. If @valp is not NULL the value of the register + * at the time it indicated completion is stored there. Returns 0 if the + * operation completes and -EAGAIN otherwise. + */ +static int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask, + int polarity, int attempts, int delay, u32 *valp) +{ + while (1) { + u32 val = t4_read_reg(adapter, reg); + + if (!!(val & mask) == polarity) { + if (valp) + *valp = val; + return 0; + } + if (--attempts == 0) + return -EAGAIN; + if (delay) + udelay(delay); + } +} + +static inline int t4_wait_op_done(struct adapter *adapter, int reg, u32 mask, + int polarity, int attempts, int delay) +{ + return t4_wait_op_done_val(adapter, reg, mask, polarity, attempts, + delay, NULL); +} + +/** + * t4_set_reg_field - set a register field to a value + * @adapter: the adapter to program + * @addr: the register address + * @mask: specifies the portion of the register to modify + * @val: the new value for the register field + * + * Sets a register field specified by the supplied mask to the + * given value. + */ +void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask, + u32 val) +{ + u32 v = t4_read_reg(adapter, addr) & ~mask; + + t4_write_reg(adapter, addr, v | val); + (void) t4_read_reg(adapter, addr); /* flush */ +} + +/** + * t4_read_indirect - read indirectly addressed registers + * @adap: the adapter + * @addr_reg: register holding the indirect address + * @data_reg: register holding the value of the indirect register + * @vals: where the read register values are stored + * @nregs: how many indirect registers to read + * @start_idx: index of first indirect register to read + * + * Reads registers that are accessed indirectly through an address/data + * register pair. + */ +void t4_read_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, u32 *vals, + unsigned int nregs, unsigned int start_idx) +{ + while (nregs--) { + t4_write_reg(adap, addr_reg, start_idx); + *vals++ = t4_read_reg(adap, data_reg); + start_idx++; + } +} + +/** + * t4_write_indirect - write indirectly addressed registers + * @adap: the adapter + * @addr_reg: register holding the indirect addresses + * @data_reg: register holding the value for the indirect registers + * @vals: values to write + * @nregs: how many indirect registers to write + * @start_idx: address of first indirect register to write + * + * Writes a sequential block of registers that are accessed indirectly + * through an address/data register pair. + */ +void t4_write_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, const u32 *vals, + unsigned int nregs, unsigned int start_idx) +{ + while (nregs--) { + t4_write_reg(adap, addr_reg, start_idx++); + t4_write_reg(adap, data_reg, *vals++); + } +} + +/* + * Read a 32-bit PCI Configuration Space register via the PCI-E backdoor + * mechanism. This guarantees that we get the real value even if we're + * operating within a Virtual Machine and the Hypervisor is trapping our + * Configuration Space accesses. + */ +void t4_hw_pci_read_cfg4(struct adapter *adap, int reg, u32 *val) +{ + u32 req = ENABLE_F | FUNCTION_V(adap->fn) | REGISTER_V(reg); + + if (is_t4(adap->params.chip)) + req |= LOCALCFG_F; + + t4_write_reg(adap, PCIE_CFG_SPACE_REQ_A, req); + *val = t4_read_reg(adap, PCIE_CFG_SPACE_DATA_A); + + /* Reset ENABLE to 0 so reads of PCIE_CFG_SPACE_DATA won't cause a + * Configuration Space read. (None of the other fields matter when + * ENABLE is 0 so a simple register write is easier than a + * read-modify-write via t4_set_reg_field().) + */ + t4_write_reg(adap, PCIE_CFG_SPACE_REQ_A, 0); +} + +/* + * t4_report_fw_error - report firmware error + * @adap: the adapter + * + * The adapter firmware can indicate error conditions to the host. + * If the firmware has indicated an error, print out the reason for + * the firmware error. + */ +static void t4_report_fw_error(struct adapter *adap) +{ + static const char *const reason[] = { + "Crash", /* PCIE_FW_EVAL_CRASH */ + "During Device Preparation", /* PCIE_FW_EVAL_PREP */ + "During Device Configuration", /* PCIE_FW_EVAL_CONF */ + "During Device Initialization", /* PCIE_FW_EVAL_INIT */ + "Unexpected Event", /* PCIE_FW_EVAL_UNEXPECTEDEVENT */ + "Insufficient Airflow", /* PCIE_FW_EVAL_OVERHEAT */ + "Device Shutdown", /* PCIE_FW_EVAL_DEVICESHUTDOWN */ + "Reserved", /* reserved */ + }; + u32 pcie_fw; + + pcie_fw = t4_read_reg(adap, PCIE_FW_A); + if (pcie_fw & PCIE_FW_ERR_F) + dev_err(adap->pdev_dev, "Firmware reports adapter error: %s\n", + reason[PCIE_FW_EVAL_G(pcie_fw)]); +} + +/* + * Get the reply to a mailbox command and store it in @rpl in big-endian order. + */ +static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit, + u32 mbox_addr) +{ + for ( ; nflit; nflit--, mbox_addr += 8) + *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr)); +} + +/* + * Handle a FW assertion reported in a mailbox. + */ +static void fw_asrt(struct adapter *adap, u32 mbox_addr) +{ + struct fw_debug_cmd asrt; + + get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr); + dev_alert(adap->pdev_dev, + "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n", + asrt.u.assert.filename_0_7, ntohl(asrt.u.assert.line), + ntohl(asrt.u.assert.x), ntohl(asrt.u.assert.y)); +} + +static void dump_mbox(struct adapter *adap, int mbox, u32 data_reg) +{ + dev_err(adap->pdev_dev, + "mbox %d: %llx %llx %llx %llx %llx %llx %llx %llx\n", mbox, + (unsigned long long)t4_read_reg64(adap, data_reg), + (unsigned long long)t4_read_reg64(adap, data_reg + 8), + (unsigned long long)t4_read_reg64(adap, data_reg + 16), + (unsigned long long)t4_read_reg64(adap, data_reg + 24), + (unsigned long long)t4_read_reg64(adap, data_reg + 32), + (unsigned long long)t4_read_reg64(adap, data_reg + 40), + (unsigned long long)t4_read_reg64(adap, data_reg + 48), + (unsigned long long)t4_read_reg64(adap, data_reg + 56)); +} + +/** + * t4_wr_mbox_meat - send a command to FW through the given mailbox + * @adap: the adapter + * @mbox: index of the mailbox to use + * @cmd: the command to write + * @size: command length in bytes + * @rpl: where to optionally store the reply + * @sleep_ok: if true we may sleep while awaiting command completion + * + * Sends the given command to FW through the selected mailbox and waits + * for the FW to execute the command. If @rpl is not %NULL it is used to + * store the FW's reply to the command. The command and its optional + * reply are of the same length. FW can take up to %FW_CMD_MAX_TIMEOUT ms + * to respond. @sleep_ok determines whether we may sleep while awaiting + * the response. If sleeping is allowed we use progressive backoff + * otherwise we spin. + * + * The return value is 0 on success or a negative errno on failure. A + * failure can happen either because we are not able to execute the + * command or FW executes it but signals an error. In the latter case + * the return value is the error code indicated by FW (negated). + */ +int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, + void *rpl, bool sleep_ok) +{ + static const int delay[] = { + 1, 1, 3, 5, 10, 10, 20, 50, 100, 200 + }; + + u32 v; + u64 res; + int i, ms, delay_idx; + const __be64 *p = cmd; + u32 data_reg = PF_REG(mbox, CIM_PF_MAILBOX_DATA_A); + u32 ctl_reg = PF_REG(mbox, CIM_PF_MAILBOX_CTRL_A); + + if ((size & 15) || size > MBOX_LEN) + return -EINVAL; + + /* + * If the device is off-line, as in EEH, commands will time out. + * Fail them early so we don't waste time waiting. + */ + if (adap->pdev->error_state != pci_channel_io_normal) + return -EIO; + + v = MBOWNER_G(t4_read_reg(adap, ctl_reg)); + for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++) + v = MBOWNER_G(t4_read_reg(adap, ctl_reg)); + + if (v != MBOX_OWNER_DRV) + return v ? -EBUSY : -ETIMEDOUT; + + for (i = 0; i < size; i += 8) + t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p++)); + + t4_write_reg(adap, ctl_reg, MBMSGVALID_F | MBOWNER_V(MBOX_OWNER_FW)); + t4_read_reg(adap, ctl_reg); /* flush write */ + + delay_idx = 0; + ms = delay[0]; + + for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) { + if (sleep_ok) { + ms = delay[delay_idx]; /* last element may repeat */ + if (delay_idx < ARRAY_SIZE(delay) - 1) + delay_idx++; + msleep(ms); + } else + mdelay(ms); + + v = t4_read_reg(adap, ctl_reg); + if (MBOWNER_G(v) == MBOX_OWNER_DRV) { + if (!(v & MBMSGVALID_F)) { + t4_write_reg(adap, ctl_reg, 0); + continue; + } + + res = t4_read_reg64(adap, data_reg); + if (FW_CMD_OP_G(res >> 32) == FW_DEBUG_CMD) { + fw_asrt(adap, data_reg); + res = FW_CMD_RETVAL_V(EIO); + } else if (rpl) { + get_mbox_rpl(adap, rpl, size / 8, data_reg); + } + + if (FW_CMD_RETVAL_G((int)res)) + dump_mbox(adap, mbox, data_reg); + t4_write_reg(adap, ctl_reg, 0); + return -FW_CMD_RETVAL_G((int)res); + } + } + + dump_mbox(adap, mbox, data_reg); + dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n", + *(const u8 *)cmd, mbox); + t4_report_fw_error(adap); + return -ETIMEDOUT; +} + +/** + * t4_mc_read - read from MC through backdoor accesses + * @adap: the adapter + * @addr: address of first byte requested + * @idx: which MC to access + * @data: 64 bytes of data containing the requested address + * @ecc: where to store the corresponding 64-bit ECC word + * + * Read 64 bytes of data from MC starting at a 64-byte-aligned address + * that covers the requested address @addr. If @parity is not %NULL it + * is assigned the 64-bit ECC word for the read data. + */ +int t4_mc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) +{ + int i; + u32 mc_bist_cmd, mc_bist_cmd_addr, mc_bist_cmd_len; + u32 mc_bist_status_rdata, mc_bist_data_pattern; + + if (is_t4(adap->params.chip)) { + mc_bist_cmd = MC_BIST_CMD_A; + mc_bist_cmd_addr = MC_BIST_CMD_ADDR_A; + mc_bist_cmd_len = MC_BIST_CMD_LEN_A; + mc_bist_status_rdata = MC_BIST_STATUS_RDATA_A; + mc_bist_data_pattern = MC_BIST_DATA_PATTERN_A; + } else { + mc_bist_cmd = MC_REG(MC_P_BIST_CMD_A, idx); + mc_bist_cmd_addr = MC_REG(MC_P_BIST_CMD_ADDR_A, idx); + mc_bist_cmd_len = MC_REG(MC_P_BIST_CMD_LEN_A, idx); + mc_bist_status_rdata = MC_REG(MC_P_BIST_STATUS_RDATA_A, idx); + mc_bist_data_pattern = MC_REG(MC_P_BIST_DATA_PATTERN_A, idx); + } + + if (t4_read_reg(adap, mc_bist_cmd) & START_BIST_F) + return -EBUSY; + t4_write_reg(adap, mc_bist_cmd_addr, addr & ~0x3fU); + t4_write_reg(adap, mc_bist_cmd_len, 64); + t4_write_reg(adap, mc_bist_data_pattern, 0xc); + t4_write_reg(adap, mc_bist_cmd, BIST_OPCODE_V(1) | START_BIST_F | + BIST_CMD_GAP_V(1)); + i = t4_wait_op_done(adap, mc_bist_cmd, START_BIST_F, 0, 10, 1); + if (i) + return i; + +#define MC_DATA(i) MC_BIST_STATUS_REG(mc_bist_status_rdata, i) + + for (i = 15; i >= 0; i--) + *data++ = htonl(t4_read_reg(adap, MC_DATA(i))); + if (ecc) + *ecc = t4_read_reg64(adap, MC_DATA(16)); +#undef MC_DATA + return 0; +} + +/** + * t4_edc_read - read from EDC through backdoor accesses + * @adap: the adapter + * @idx: which EDC to access + * @addr: address of first byte requested + * @data: 64 bytes of data containing the requested address + * @ecc: where to store the corresponding 64-bit ECC word + * + * Read 64 bytes of data from EDC starting at a 64-byte-aligned address + * that covers the requested address @addr. If @parity is not %NULL it + * is assigned the 64-bit ECC word for the read data. + */ +int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) +{ + int i; + u32 edc_bist_cmd, edc_bist_cmd_addr, edc_bist_cmd_len; + u32 edc_bist_cmd_data_pattern, edc_bist_status_rdata; + + if (is_t4(adap->params.chip)) { + edc_bist_cmd = EDC_REG(EDC_BIST_CMD_A, idx); + edc_bist_cmd_addr = EDC_REG(EDC_BIST_CMD_ADDR_A, idx); + edc_bist_cmd_len = EDC_REG(EDC_BIST_CMD_LEN_A, idx); + edc_bist_cmd_data_pattern = EDC_REG(EDC_BIST_DATA_PATTERN_A, + idx); + edc_bist_status_rdata = EDC_REG(EDC_BIST_STATUS_RDATA_A, + idx); + } else { + edc_bist_cmd = EDC_REG_T5(EDC_H_BIST_CMD_A, idx); + edc_bist_cmd_addr = EDC_REG_T5(EDC_H_BIST_CMD_ADDR_A, idx); + edc_bist_cmd_len = EDC_REG_T5(EDC_H_BIST_CMD_LEN_A, idx); + edc_bist_cmd_data_pattern = + EDC_REG_T5(EDC_H_BIST_DATA_PATTERN_A, idx); + edc_bist_status_rdata = + EDC_REG_T5(EDC_H_BIST_STATUS_RDATA_A, idx); + } + + if (t4_read_reg(adap, edc_bist_cmd) & START_BIST_F) + return -EBUSY; + t4_write_reg(adap, edc_bist_cmd_addr, addr & ~0x3fU); + t4_write_reg(adap, edc_bist_cmd_len, 64); + t4_write_reg(adap, edc_bist_cmd_data_pattern, 0xc); + t4_write_reg(adap, edc_bist_cmd, + BIST_OPCODE_V(1) | BIST_CMD_GAP_V(1) | START_BIST_F); + i = t4_wait_op_done(adap, edc_bist_cmd, START_BIST_F, 0, 10, 1); + if (i) + return i; + +#define EDC_DATA(i) (EDC_BIST_STATUS_REG(edc_bist_status_rdata, i)) + + for (i = 15; i >= 0; i--) + *data++ = htonl(t4_read_reg(adap, EDC_DATA(i))); + if (ecc) + *ecc = t4_read_reg64(adap, EDC_DATA(16)); +#undef EDC_DATA + return 0; +} + +/** + * t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window + * @adap: the adapter + * @win: PCI-E Memory Window to use + * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC + * @addr: address within indicated memory type + * @len: amount of memory to transfer + * @hbuf: host memory buffer + * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0) + * + * Reads/writes an [almost] arbitrary memory region in the firmware: the + * firmware memory address and host buffer must be aligned on 32-bit + * boudaries; the length may be arbitrary. The memory is transferred as + * a raw byte sequence from/to the firmware's memory. If this memory + * contains data structures which contain multi-byte integers, it's the + * caller's responsibility to perform appropriate byte order conversions. + */ +int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr, + u32 len, void *hbuf, int dir) +{ + u32 pos, offset, resid, memoffset; + u32 edc_size, mc_size, win_pf, mem_reg, mem_aperture, mem_base; + u32 *buf; + + /* Argument sanity checks ... + */ + if (addr & 0x3 || (uintptr_t)hbuf & 0x3) + return -EINVAL; + buf = (u32 *)hbuf; + + /* It's convenient to be able to handle lengths which aren't a + * multiple of 32-bits because we often end up transferring files to + * the firmware. So we'll handle that by normalizing the length here + * and then handling any residual transfer at the end. + */ + resid = len & 0x3; + len -= resid; + + /* Offset into the region of memory which is being accessed + * MEM_EDC0 = 0 + * MEM_EDC1 = 1 + * MEM_MC = 2 -- T4 + * MEM_MC0 = 2 -- For T5 + * MEM_MC1 = 3 -- For T5 + */ + edc_size = EDRAM0_SIZE_G(t4_read_reg(adap, MA_EDRAM0_BAR_A)); + if (mtype != MEM_MC1) + memoffset = (mtype * (edc_size * 1024 * 1024)); + else { + mc_size = EXT_MEM0_SIZE_G(t4_read_reg(adap, + MA_EXT_MEMORY0_BAR_A)); + memoffset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024; + } + + /* Determine the PCIE_MEM_ACCESS_OFFSET */ + addr = addr + memoffset; + + /* Each PCI-E Memory Window is programmed with a window size -- or + * "aperture" -- which controls the granularity of its mapping onto + * adapter memory. We need to grab that aperture in order to know + * how to use the specified window. The window is also programmed + * with the base address of the Memory Window in BAR0's address + * space. For T4 this is an absolute PCI-E Bus Address. For T5 + * the address is relative to BAR0. + */ + mem_reg = t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, + win)); + mem_aperture = 1 << (WINDOW_G(mem_reg) + WINDOW_SHIFT_X); + mem_base = PCIEOFST_G(mem_reg) << PCIEOFST_SHIFT_X; + if (is_t4(adap->params.chip)) + mem_base -= adap->t4_bar0; + win_pf = is_t4(adap->params.chip) ? 0 : PFNUM_V(adap->fn); + + /* Calculate our initial PCI-E Memory Window Position and Offset into + * that Window. + */ + pos = addr & ~(mem_aperture-1); + offset = addr - pos; + + /* Set up initial PCI-E Memory Window to cover the start of our + * transfer. (Read it back to ensure that changes propagate before we + * attempt to use the new value.) + */ + t4_write_reg(adap, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win), + pos | win_pf); + t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win)); + + /* Transfer data to/from the adapter as long as there's an integral + * number of 32-bit transfers to complete. + * + * A note on Endianness issues: + * + * The "register" reads and writes below from/to the PCI-E Memory + * Window invoke the standard adapter Big-Endian to PCI-E Link + * Little-Endian "swizzel." As a result, if we have the following + * data in adapter memory: + * + * Memory: ... | b0 | b1 | b2 | b3 | ... + * Address: i+0 i+1 i+2 i+3 + * + * Then a read of the adapter memory via the PCI-E Memory Window + * will yield: + * + * x = readl(i) + * 31 0 + * [ b3 | b2 | b1 | b0 ] + * + * If this value is stored into local memory on a Little-Endian system + * it will show up correctly in local memory as: + * + * ( ..., b0, b1, b2, b3, ... ) + * + * But on a Big-Endian system, the store will show up in memory + * incorrectly swizzled as: + * + * ( ..., b3, b2, b1, b0, ... ) + * + * So we need to account for this in the reads and writes to the + * PCI-E Memory Window below by undoing the register read/write + * swizzels. + */ + while (len > 0) { + if (dir == T4_MEMORY_READ) + *buf++ = le32_to_cpu((__force __le32)t4_read_reg(adap, + mem_base + offset)); + else + t4_write_reg(adap, mem_base + offset, + (__force u32)cpu_to_le32(*buf++)); + offset += sizeof(__be32); + len -= sizeof(__be32); + + /* If we've reached the end of our current window aperture, + * move the PCI-E Memory Window on to the next. Note that + * doing this here after "len" may be 0 allows us to set up + * the PCI-E Memory Window for a possible final residual + * transfer below ... + */ + if (offset == mem_aperture) { + pos += mem_aperture; + offset = 0; + t4_write_reg(adap, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, + win), pos | win_pf); + t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, + win)); + } + } + + /* If the original transfer had a length which wasn't a multiple of + * 32-bits, now's where we need to finish off the transfer of the + * residual amount. The PCI-E Memory Window has already been moved + * above (if necessary) to cover this final transfer. + */ + if (resid) { + union { + u32 word; + char byte[4]; + } last; + unsigned char *bp; + int i; + + if (dir == T4_MEMORY_READ) { + last.word = le32_to_cpu( + (__force __le32)t4_read_reg(adap, + mem_base + offset)); + for (bp = (unsigned char *)buf, i = resid; i < 4; i++) + bp[i] = last.byte[i]; + } else { + last.word = *buf; + for (i = resid; i < 4; i++) + last.byte[i] = 0; + t4_write_reg(adap, mem_base + offset, + (__force u32)cpu_to_le32(last.word)); + } + } + + return 0; +} + +/** + * t4_get_regs_len - return the size of the chips register set + * @adapter: the adapter + * + * Returns the size of the chip's BAR0 register space. + */ +unsigned int t4_get_regs_len(struct adapter *adapter) +{ + unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip); + + switch (chip_version) { + case CHELSIO_T4: + return T4_REGMAP_SIZE; + + case CHELSIO_T5: + return T5_REGMAP_SIZE; + } + + dev_err(adapter->pdev_dev, + "Unsupported chip version %d\n", chip_version); + return 0; +} + +/** + * t4_get_regs - read chip registers into provided buffer + * @adap: the adapter + * @buf: register buffer + * @buf_size: size (in bytes) of register buffer + * + * If the provided register buffer isn't large enough for the chip's + * full register range, the register dump will be truncated to the + * register buffer's size. + */ +void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size) +{ + static const unsigned int t4_reg_ranges[] = { + 0x1008, 0x1108, + 0x1180, 0x11b4, + 0x11fc, 0x123c, + 0x1300, 0x173c, + 0x1800, 0x18fc, + 0x3000, 0x30d8, + 0x30e0, 0x5924, + 0x5960, 0x59d4, + 0x5a00, 0x5af8, + 0x6000, 0x6098, + 0x6100, 0x6150, + 0x6200, 0x6208, + 0x6240, 0x6248, + 0x6280, 0x6338, + 0x6370, 0x638c, + 0x6400, 0x643c, + 0x6500, 0x6524, + 0x6a00, 0x6a38, + 0x6a60, 0x6a78, + 0x6b00, 0x6b84, + 0x6bf0, 0x6c84, + 0x6cf0, 0x6d84, + 0x6df0, 0x6e84, + 0x6ef0, 0x6f84, + 0x6ff0, 0x7084, + 0x70f0, 0x7184, + 0x71f0, 0x7284, + 0x72f0, 0x7384, + 0x73f0, 0x7450, + 0x7500, 0x7530, + 0x7600, 0x761c, + 0x7680, 0x76cc, + 0x7700, 0x7798, + 0x77c0, 0x77fc, + 0x7900, 0x79fc, + 0x7b00, 0x7c38, + 0x7d00, 0x7efc, + 0x8dc0, 0x8e1c, + 0x8e30, 0x8e78, + 0x8ea0, 0x8f6c, + 0x8fc0, 0x9074, + 0x90fc, 0x90fc, + 0x9400, 0x9458, + 0x9600, 0x96bc, + 0x9800, 0x9808, + 0x9820, 0x983c, + 0x9850, 0x9864, + 0x9c00, 0x9c6c, + 0x9c80, 0x9cec, + 0x9d00, 0x9d6c, + 0x9d80, 0x9dec, + 0x9e00, 0x9e6c, + 0x9e80, 0x9eec, + 0x9f00, 0x9f6c, + 0x9f80, 0x9fec, + 0xd004, 0xd03c, + 0xdfc0, 0xdfe0, + 0xe000, 0xea7c, + 0xf000, 0x11110, + 0x11118, 0x11190, + 0x19040, 0x1906c, + 0x19078, 0x19080, + 0x1908c, 0x19124, + 0x19150, 0x191b0, + 0x191d0, 0x191e8, + 0x19238, 0x1924c, + 0x193f8, 0x19474, + 0x19490, 0x194f8, + 0x19800, 0x19f30, + 0x1a000, 0x1a06c, + 0x1a0b0, 0x1a120, + 0x1a128, 0x1a138, + 0x1a190, 0x1a1c4, + 0x1a1fc, 0x1a1fc, + 0x1e040, 0x1e04c, + 0x1e284, 0x1e28c, + 0x1e2c0, 0x1e2c0, + 0x1e2e0, 0x1e2e0, + 0x1e300, 0x1e384, + 0x1e3c0, 0x1e3c8, + 0x1e440, 0x1e44c, + 0x1e684, 0x1e68c, + 0x1e6c0, 0x1e6c0, + 0x1e6e0, 0x1e6e0, + 0x1e700, 0x1e784, + 0x1e7c0, 0x1e7c8, + 0x1e840, 0x1e84c, + 0x1ea84, 0x1ea8c, + 0x1eac0, 0x1eac0, + 0x1eae0, 0x1eae0, + 0x1eb00, 0x1eb84, + 0x1ebc0, 0x1ebc8, + 0x1ec40, 0x1ec4c, + 0x1ee84, 0x1ee8c, + 0x1eec0, 0x1eec0, + 0x1eee0, 0x1eee0, + 0x1ef00, 0x1ef84, + 0x1efc0, 0x1efc8, + 0x1f040, 0x1f04c, + 0x1f284, 0x1f28c, + 0x1f2c0, 0x1f2c0, + 0x1f2e0, 0x1f2e0, + 0x1f300, 0x1f384, + 0x1f3c0, 0x1f3c8, + 0x1f440, 0x1f44c, + 0x1f684, 0x1f68c, + 0x1f6c0, 0x1f6c0, + 0x1f6e0, 0x1f6e0, + 0x1f700, 0x1f784, + 0x1f7c0, 0x1f7c8, + 0x1f840, 0x1f84c, + 0x1fa84, 0x1fa8c, + 0x1fac0, 0x1fac0, + 0x1fae0, 0x1fae0, + 0x1fb00, 0x1fb84, + 0x1fbc0, 0x1fbc8, + 0x1fc40, 0x1fc4c, + 0x1fe84, 0x1fe8c, + 0x1fec0, 0x1fec0, + 0x1fee0, 0x1fee0, + 0x1ff00, 0x1ff84, + 0x1ffc0, 0x1ffc8, + 0x20000, 0x2002c, + 0x20100, 0x2013c, + 0x20190, 0x201c8, + 0x20200, 0x20318, + 0x20400, 0x20528, + 0x20540, 0x20614, + 0x21000, 0x21040, + 0x2104c, 0x21060, + 0x210c0, 0x210ec, + 0x21200, 0x21268, + 0x21270, 0x21284, + 0x212fc, 0x21388, + 0x21400, 0x21404, + 0x21500, 0x21518, + 0x2152c, 0x2153c, + 0x21550, 0x21554, + 0x21600, 0x21600, + 0x21608, 0x21628, + 0x21630, 0x2163c, + 0x21700, 0x2171c, + 0x21780, 0x2178c, + 0x21800, 0x21c38, + 0x21c80, 0x21d7c, + 0x21e00, 0x21e04, + 0x22000, 0x2202c, + 0x22100, 0x2213c, + 0x22190, 0x221c8, + 0x22200, 0x22318, + 0x22400, 0x22528, + 0x22540, 0x22614, + 0x23000, 0x23040, + 0x2304c, 0x23060, + 0x230c0, 0x230ec, + 0x23200, 0x23268, + 0x23270, 0x23284, + 0x232fc, 0x23388, + 0x23400, 0x23404, + 0x23500, 0x23518, + 0x2352c, 0x2353c, + 0x23550, 0x23554, + 0x23600, 0x23600, + 0x23608, 0x23628, + 0x23630, 0x2363c, + 0x23700, 0x2371c, + 0x23780, 0x2378c, + 0x23800, 0x23c38, + 0x23c80, 0x23d7c, + 0x23e00, 0x23e04, + 0x24000, 0x2402c, + 0x24100, 0x2413c, + 0x24190, 0x241c8, + 0x24200, 0x24318, + 0x24400, 0x24528, + 0x24540, 0x24614, + 0x25000, 0x25040, + 0x2504c, 0x25060, + 0x250c0, 0x250ec, + 0x25200, 0x25268, + 0x25270, 0x25284, + 0x252fc, 0x25388, + 0x25400, 0x25404, + 0x25500, 0x25518, + 0x2552c, 0x2553c, + 0x25550, 0x25554, + 0x25600, 0x25600, + 0x25608, 0x25628, + 0x25630, 0x2563c, + 0x25700, 0x2571c, + 0x25780, 0x2578c, + 0x25800, 0x25c38, + 0x25c80, 0x25d7c, + 0x25e00, 0x25e04, + 0x26000, 0x2602c, + 0x26100, 0x2613c, + 0x26190, 0x261c8, + 0x26200, 0x26318, + 0x26400, 0x26528, + 0x26540, 0x26614, + 0x27000, 0x27040, + 0x2704c, 0x27060, + 0x270c0, 0x270ec, + 0x27200, 0x27268, + 0x27270, 0x27284, + 0x272fc, 0x27388, + 0x27400, 0x27404, + 0x27500, 0x27518, + 0x2752c, 0x2753c, + 0x27550, 0x27554, + 0x27600, 0x27600, + 0x27608, 0x27628, + 0x27630, 0x2763c, + 0x27700, 0x2771c, + 0x27780, 0x2778c, + 0x27800, 0x27c38, + 0x27c80, 0x27d7c, + 0x27e00, 0x27e04 + }; + + static const unsigned int t5_reg_ranges[] = { + 0x1008, 0x1148, + 0x1180, 0x11b4, + 0x11fc, 0x123c, + 0x1280, 0x173c, + 0x1800, 0x18fc, + 0x3000, 0x3028, + 0x3060, 0x30d8, + 0x30e0, 0x30fc, + 0x3140, 0x357c, + 0x35a8, 0x35cc, + 0x35ec, 0x35ec, + 0x3600, 0x5624, + 0x56cc, 0x575c, + 0x580c, 0x5814, + 0x5890, 0x58bc, + 0x5940, 0x59dc, + 0x59fc, 0x5a18, + 0x5a60, 0x5a9c, + 0x5b9c, 0x5bfc, + 0x6000, 0x6040, + 0x6058, 0x614c, + 0x7700, 0x7798, + 0x77c0, 0x78fc, + 0x7b00, 0x7c54, + 0x7d00, 0x7efc, + 0x8dc0, 0x8de0, + 0x8df8, 0x8e84, + 0x8ea0, 0x8f84, + 0x8fc0, 0x90f8, + 0x9400, 0x9470, + 0x9600, 0x96f4, + 0x9800, 0x9808, + 0x9820, 0x983c, + 0x9850, 0x9864, + 0x9c00, 0x9c6c, + 0x9c80, 0x9cec, + 0x9d00, 0x9d6c, + 0x9d80, 0x9dec, + 0x9e00, 0x9e6c, + 0x9e80, 0x9eec, + 0x9f00, 0x9f6c, + 0x9f80, 0xa020, + 0xd004, 0xd03c, + 0xdfc0, 0xdfe0, + 0xe000, 0x11088, + 0x1109c, 0x11110, + 0x11118, 0x1117c, + 0x11190, 0x11204, + 0x19040, 0x1906c, + 0x19078, 0x19080, + 0x1908c, 0x19124, + 0x19150, 0x191b0, + 0x191d0, 0x191e8, + 0x19238, 0x19290, + 0x193f8, 0x19474, + 0x19490, 0x194cc, + 0x194f0, 0x194f8, + 0x19c00, 0x19c60, + 0x19c94, 0x19e10, + 0x19e50, 0x19f34, + 0x19f40, 0x19f50, + 0x19f90, 0x19fe4, + 0x1a000, 0x1a06c, + 0x1a0b0, 0x1a120, + 0x1a128, 0x1a138, + 0x1a190, 0x1a1c4, + 0x1a1fc, 0x1a1fc, + 0x1e008, 0x1e00c, + 0x1e040, 0x1e04c, + 0x1e284, 0x1e290, + 0x1e2c0, 0x1e2c0, + 0x1e2e0, 0x1e2e0, + 0x1e300, 0x1e384, + 0x1e3c0, 0x1e3c8, + 0x1e408, 0x1e40c, + 0x1e440, 0x1e44c, + 0x1e684, 0x1e690, + 0x1e6c0, 0x1e6c0, + 0x1e6e0, 0x1e6e0, + 0x1e700, 0x1e784, + 0x1e7c0, 0x1e7c8, + 0x1e808, 0x1e80c, + 0x1e840, 0x1e84c, + 0x1ea84, 0x1ea90, + 0x1eac0, 0x1eac0, + 0x1eae0, 0x1eae0, + 0x1eb00, 0x1eb84, + 0x1ebc0, 0x1ebc8, + 0x1ec08, 0x1ec0c, + 0x1ec40, 0x1ec4c, + 0x1ee84, 0x1ee90, + 0x1eec0, 0x1eec0, + 0x1eee0, 0x1eee0, + 0x1ef00, 0x1ef84, + 0x1efc0, 0x1efc8, + 0x1f008, 0x1f00c, + 0x1f040, 0x1f04c, + 0x1f284, 0x1f290, + 0x1f2c0, 0x1f2c0, + 0x1f2e0, 0x1f2e0, + 0x1f300, 0x1f384, + 0x1f3c0, 0x1f3c8, + 0x1f408, 0x1f40c, + 0x1f440, 0x1f44c, + 0x1f684, 0x1f690, + 0x1f6c0, 0x1f6c0, + 0x1f6e0, 0x1f6e0, + 0x1f700, 0x1f784, + 0x1f7c0, 0x1f7c8, + 0x1f808, 0x1f80c, + 0x1f840, 0x1f84c, + 0x1fa84, 0x1fa90, + 0x1fac0, 0x1fac0, + 0x1fae0, 0x1fae0, + 0x1fb00, 0x1fb84, + 0x1fbc0, 0x1fbc8, + 0x1fc08, 0x1fc0c, + 0x1fc40, 0x1fc4c, + 0x1fe84, 0x1fe90, + 0x1fec0, 0x1fec0, + 0x1fee0, 0x1fee0, + 0x1ff00, 0x1ff84, + 0x1ffc0, 0x1ffc8, + 0x30000, 0x30030, + 0x30100, 0x30144, + 0x30190, 0x301d0, + 0x30200, 0x30318, + 0x30400, 0x3052c, + 0x30540, 0x3061c, + 0x30800, 0x30834, + 0x308c0, 0x30908, + 0x30910, 0x309ac, + 0x30a00, 0x30a04, + 0x30a0c, 0x30a2c, + 0x30a44, 0x30a50, + 0x30a74, 0x30c24, + 0x30d08, 0x30d14, + 0x30d1c, 0x30d20, + 0x30d3c, 0x30d50, + 0x31200, 0x3120c, + 0x31220, 0x31220, + 0x31240, 0x31240, + 0x31600, 0x31600, + 0x31608, 0x3160c, + 0x31a00, 0x31a1c, + 0x31e04, 0x31e20, + 0x31e38, 0x31e3c, + 0x31e80, 0x31e80, + 0x31e88, 0x31ea8, + 0x31eb0, 0x31eb4, + 0x31ec8, 0x31ed4, + 0x31fb8, 0x32004, + 0x32208, 0x3223c, + 0x32600, 0x32630, + 0x32a00, 0x32abc, + 0x32b00, 0x32b70, + 0x33000, 0x33048, + 0x33060, 0x3309c, + 0x330f0, 0x33148, + 0x33160, 0x3319c, + 0x331f0, 0x332e4, + 0x332f8, 0x333e4, + 0x333f8, 0x33448, + 0x33460, 0x3349c, + 0x334f0, 0x33548, + 0x33560, 0x3359c, + 0x335f0, 0x336e4, + 0x336f8, 0x337e4, + 0x337f8, 0x337fc, + 0x33814, 0x33814, + 0x3382c, 0x3382c, + 0x33880, 0x3388c, + 0x338e8, 0x338ec, + 0x33900, 0x33948, + 0x33960, 0x3399c, + 0x339f0, 0x33ae4, + 0x33af8, 0x33b10, + 0x33b28, 0x33b28, + 0x33b3c, 0x33b50, + 0x33bf0, 0x33c10, + 0x33c28, 0x33c28, + 0x33c3c, 0x33c50, + 0x33cf0, 0x33cfc, + 0x34000, 0x34030, + 0x34100, 0x34144, + 0x34190, 0x341d0, + 0x34200, 0x34318, + 0x34400, 0x3452c, + 0x34540, 0x3461c, + 0x34800, 0x34834, + 0x348c0, 0x34908, + 0x34910, 0x349ac, + 0x34a00, 0x34a04, + 0x34a0c, 0x34a2c, + 0x34a44, 0x34a50, + 0x34a74, 0x34c24, + 0x34d08, 0x34d14, + 0x34d1c, 0x34d20, + 0x34d3c, 0x34d50, + 0x35200, 0x3520c, + 0x35220, 0x35220, + 0x35240, 0x35240, + 0x35600, 0x35600, + 0x35608, 0x3560c, + 0x35a00, 0x35a1c, + 0x35e04, 0x35e20, + 0x35e38, 0x35e3c, + 0x35e80, 0x35e80, + 0x35e88, 0x35ea8, + 0x35eb0, 0x35eb4, + 0x35ec8, 0x35ed4, + 0x35fb8, 0x36004, + 0x36208, 0x3623c, + 0x36600, 0x36630, + 0x36a00, 0x36abc, + 0x36b00, 0x36b70, + 0x37000, 0x37048, + 0x37060, 0x3709c, + 0x370f0, 0x37148, + 0x37160, 0x3719c, + 0x371f0, 0x372e4, + 0x372f8, 0x373e4, + 0x373f8, 0x37448, + 0x37460, 0x3749c, + 0x374f0, 0x37548, + 0x37560, 0x3759c, + 0x375f0, 0x376e4, + 0x376f8, 0x377e4, + 0x377f8, 0x377fc, + 0x37814, 0x37814, + 0x3782c, 0x3782c, + 0x37880, 0x3788c, + 0x378e8, 0x378ec, + 0x37900, 0x37948, + 0x37960, 0x3799c, + 0x379f0, 0x37ae4, + 0x37af8, 0x37b10, + 0x37b28, 0x37b28, + 0x37b3c, 0x37b50, + 0x37bf0, 0x37c10, + 0x37c28, 0x37c28, + 0x37c3c, 0x37c50, + 0x37cf0, 0x37cfc, + 0x38000, 0x38030, + 0x38100, 0x38144, + 0x38190, 0x381d0, + 0x38200, 0x38318, + 0x38400, 0x3852c, + 0x38540, 0x3861c, + 0x38800, 0x38834, + 0x388c0, 0x38908, + 0x38910, 0x389ac, + 0x38a00, 0x38a04, + 0x38a0c, 0x38a2c, + 0x38a44, 0x38a50, + 0x38a74, 0x38c24, + 0x38d08, 0x38d14, + 0x38d1c, 0x38d20, + 0x38d3c, 0x38d50, + 0x39200, 0x3920c, + 0x39220, 0x39220, + 0x39240, 0x39240, + 0x39600, 0x39600, + 0x39608, 0x3960c, + 0x39a00, 0x39a1c, + 0x39e04, 0x39e20, + 0x39e38, 0x39e3c, + 0x39e80, 0x39e80, + 0x39e88, 0x39ea8, + 0x39eb0, 0x39eb4, + 0x39ec8, 0x39ed4, + 0x39fb8, 0x3a004, + 0x3a208, 0x3a23c, + 0x3a600, 0x3a630, + 0x3aa00, 0x3aabc, + 0x3ab00, 0x3ab70, + 0x3b000, 0x3b048, + 0x3b060, 0x3b09c, + 0x3b0f0, 0x3b148, + 0x3b160, 0x3b19c, + 0x3b1f0, 0x3b2e4, + 0x3b2f8, 0x3b3e4, + 0x3b3f8, 0x3b448, + 0x3b460, 0x3b49c, + 0x3b4f0, 0x3b548, + 0x3b560, 0x3b59c, + 0x3b5f0, 0x3b6e4, + 0x3b6f8, 0x3b7e4, + 0x3b7f8, 0x3b7fc, + 0x3b814, 0x3b814, + 0x3b82c, 0x3b82c, + 0x3b880, 0x3b88c, + 0x3b8e8, 0x3b8ec, + 0x3b900, 0x3b948, + 0x3b960, 0x3b99c, + 0x3b9f0, 0x3bae4, + 0x3baf8, 0x3bb10, + 0x3bb28, 0x3bb28, + 0x3bb3c, 0x3bb50, + 0x3bbf0, 0x3bc10, + 0x3bc28, 0x3bc28, + 0x3bc3c, 0x3bc50, + 0x3bcf0, 0x3bcfc, + 0x3c000, 0x3c030, + 0x3c100, 0x3c144, + 0x3c190, 0x3c1d0, + 0x3c200, 0x3c318, + 0x3c400, 0x3c52c, + 0x3c540, 0x3c61c, + 0x3c800, 0x3c834, + 0x3c8c0, 0x3c908, + 0x3c910, 0x3c9ac, + 0x3ca00, 0x3ca04, + 0x3ca0c, 0x3ca2c, + 0x3ca44, 0x3ca50, + 0x3ca74, 0x3cc24, + 0x3cd08, 0x3cd14, + 0x3cd1c, 0x3cd20, + 0x3cd3c, 0x3cd50, + 0x3d200, 0x3d20c, + 0x3d220, 0x3d220, + 0x3d240, 0x3d240, + 0x3d600, 0x3d600, + 0x3d608, 0x3d60c, + 0x3da00, 0x3da1c, + 0x3de04, 0x3de20, + 0x3de38, 0x3de3c, + 0x3de80, 0x3de80, + 0x3de88, 0x3dea8, + 0x3deb0, 0x3deb4, + 0x3dec8, 0x3ded4, + 0x3dfb8, 0x3e004, + 0x3e208, 0x3e23c, + 0x3e600, 0x3e630, + 0x3ea00, 0x3eabc, + 0x3eb00, 0x3eb70, + 0x3f000, 0x3f048, + 0x3f060, 0x3f09c, + 0x3f0f0, 0x3f148, + 0x3f160, 0x3f19c, + 0x3f1f0, 0x3f2e4, + 0x3f2f8, 0x3f3e4, + 0x3f3f8, 0x3f448, + 0x3f460, 0x3f49c, + 0x3f4f0, 0x3f548, + 0x3f560, 0x3f59c, + 0x3f5f0, 0x3f6e4, + 0x3f6f8, 0x3f7e4, + 0x3f7f8, 0x3f7fc, + 0x3f814, 0x3f814, + 0x3f82c, 0x3f82c, + 0x3f880, 0x3f88c, + 0x3f8e8, 0x3f8ec, + 0x3f900, 0x3f948, + 0x3f960, 0x3f99c, + 0x3f9f0, 0x3fae4, + 0x3faf8, 0x3fb10, + 0x3fb28, 0x3fb28, + 0x3fb3c, 0x3fb50, + 0x3fbf0, 0x3fc10, + 0x3fc28, 0x3fc28, + 0x3fc3c, 0x3fc50, + 0x3fcf0, 0x3fcfc, + 0x40000, 0x4000c, + 0x40040, 0x40068, + 0x40080, 0x40144, + 0x40180, 0x4018c, + 0x40200, 0x40298, + 0x402ac, 0x4033c, + 0x403f8, 0x403fc, + 0x41304, 0x413c4, + 0x41400, 0x4141c, + 0x41480, 0x414d0, + 0x44000, 0x44078, + 0x440c0, 0x44278, + 0x442c0, 0x44478, + 0x444c0, 0x44678, + 0x446c0, 0x44878, + 0x448c0, 0x449fc, + 0x45000, 0x45068, + 0x45080, 0x45084, + 0x450a0, 0x450b0, + 0x45200, 0x45268, + 0x45280, 0x45284, + 0x452a0, 0x452b0, + 0x460c0, 0x460e4, + 0x47000, 0x4708c, + 0x47200, 0x47250, + 0x47400, 0x47420, + 0x47600, 0x47618, + 0x47800, 0x47814, + 0x48000, 0x4800c, + 0x48040, 0x48068, + 0x48080, 0x48144, + 0x48180, 0x4818c, + 0x48200, 0x48298, + 0x482ac, 0x4833c, + 0x483f8, 0x483fc, + 0x49304, 0x493c4, + 0x49400, 0x4941c, + 0x49480, 0x494d0, + 0x4c000, 0x4c078, + 0x4c0c0, 0x4c278, + 0x4c2c0, 0x4c478, + 0x4c4c0, 0x4c678, + 0x4c6c0, 0x4c878, + 0x4c8c0, 0x4c9fc, + 0x4d000, 0x4d068, + 0x4d080, 0x4d084, + 0x4d0a0, 0x4d0b0, + 0x4d200, 0x4d268, + 0x4d280, 0x4d284, + 0x4d2a0, 0x4d2b0, + 0x4e0c0, 0x4e0e4, + 0x4f000, 0x4f08c, + 0x4f200, 0x4f250, + 0x4f400, 0x4f420, + 0x4f600, 0x4f618, + 0x4f800, 0x4f814, + 0x50000, 0x500cc, + 0x50400, 0x50400, + 0x50800, 0x508cc, + 0x50c00, 0x50c00, + 0x51000, 0x5101c, + 0x51300, 0x51308, + }; + + u32 *buf_end = (u32 *)((char *)buf + buf_size); + const unsigned int *reg_ranges; + int reg_ranges_size, range; + unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip); + + /* Select the right set of register ranges to dump depending on the + * adapter chip type. + */ + switch (chip_version) { + case CHELSIO_T4: + reg_ranges = t4_reg_ranges; + reg_ranges_size = ARRAY_SIZE(t4_reg_ranges); + break; + + case CHELSIO_T5: + reg_ranges = t5_reg_ranges; + reg_ranges_size = ARRAY_SIZE(t5_reg_ranges); + break; + + default: + dev_err(adap->pdev_dev, + "Unsupported chip version %d\n", chip_version); + return; + } + + /* Clear the register buffer and insert the appropriate register + * values selected by the above register ranges. + */ + memset(buf, 0, buf_size); + for (range = 0; range < reg_ranges_size; range += 2) { + unsigned int reg = reg_ranges[range]; + unsigned int last_reg = reg_ranges[range + 1]; + u32 *bufp = (u32 *)((char *)buf + reg); + + /* Iterate across the register range filling in the register + * buffer but don't write past the end of the register buffer. + */ + while (reg <= last_reg && bufp < buf_end) { + *bufp++ = t4_read_reg(adap, reg); + reg += sizeof(u32); + } + } +} + +#define EEPROM_STAT_ADDR 0x7bfc +#define VPD_BASE 0x400 +#define VPD_BASE_OLD 0 +#define VPD_LEN 1024 +#define CHELSIO_VPD_UNIQUE_ID 0x82 + +/** + * t4_seeprom_wp - enable/disable EEPROM write protection + * @adapter: the adapter + * @enable: whether to enable or disable write protection + * + * Enables or disables write protection on the serial EEPROM. + */ +int t4_seeprom_wp(struct adapter *adapter, bool enable) +{ + unsigned int v = enable ? 0xc : 0; + int ret = pci_write_vpd(adapter->pdev, EEPROM_STAT_ADDR, 4, &v); + return ret < 0 ? ret : 0; +} + +/** + * get_vpd_params - read VPD parameters from VPD EEPROM + * @adapter: adapter to read + * @p: where to store the parameters + * + * Reads card parameters stored in VPD EEPROM. + */ +int get_vpd_params(struct adapter *adapter, struct vpd_params *p) +{ + u32 cclk_param, cclk_val; + int i, ret, addr; + int ec, sn, pn; + u8 *vpd, csum; + unsigned int vpdr_len, kw_offset, id_len; + + vpd = vmalloc(VPD_LEN); + if (!vpd) + return -ENOMEM; + + ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd); + if (ret < 0) + goto out; + + /* The VPD shall have a unique identifier specified by the PCI SIG. + * For chelsio adapters, the identifier is 0x82. The first byte of a VPD + * shall be CHELSIO_VPD_UNIQUE_ID (0x82). The VPD programming software + * is expected to automatically put this entry at the + * beginning of the VPD. + */ + addr = *vpd == CHELSIO_VPD_UNIQUE_ID ? VPD_BASE : VPD_BASE_OLD; + + ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd); + if (ret < 0) + goto out; + + if (vpd[0] != PCI_VPD_LRDT_ID_STRING) { + dev_err(adapter->pdev_dev, "missing VPD ID string\n"); + ret = -EINVAL; + goto out; + } + + id_len = pci_vpd_lrdt_size(vpd); + if (id_len > ID_LEN) + id_len = ID_LEN; + + i = pci_vpd_find_tag(vpd, 0, VPD_LEN, PCI_VPD_LRDT_RO_DATA); + if (i < 0) { + dev_err(adapter->pdev_dev, "missing VPD-R section\n"); + ret = -EINVAL; + goto out; + } + + vpdr_len = pci_vpd_lrdt_size(&vpd[i]); + kw_offset = i + PCI_VPD_LRDT_TAG_SIZE; + if (vpdr_len + kw_offset > VPD_LEN) { + dev_err(adapter->pdev_dev, "bad VPD-R length %u\n", vpdr_len); + ret = -EINVAL; + goto out; + } + +#define FIND_VPD_KW(var, name) do { \ + var = pci_vpd_find_info_keyword(vpd, kw_offset, vpdr_len, name); \ + if (var < 0) { \ + dev_err(adapter->pdev_dev, "missing VPD keyword " name "\n"); \ + ret = -EINVAL; \ + goto out; \ + } \ + var += PCI_VPD_INFO_FLD_HDR_SIZE; \ +} while (0) + + FIND_VPD_KW(i, "RV"); + for (csum = 0; i >= 0; i--) + csum += vpd[i]; + + if (csum) { + dev_err(adapter->pdev_dev, + "corrupted VPD EEPROM, actual csum %u\n", csum); + ret = -EINVAL; + goto out; + } + + FIND_VPD_KW(ec, "EC"); + FIND_VPD_KW(sn, "SN"); + FIND_VPD_KW(pn, "PN"); +#undef FIND_VPD_KW + + memcpy(p->id, vpd + PCI_VPD_LRDT_TAG_SIZE, id_len); + strim(p->id); + memcpy(p->ec, vpd + ec, EC_LEN); + strim(p->ec); + i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE); + memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); + strim(p->sn); + i = pci_vpd_info_field_size(vpd + pn - PCI_VPD_INFO_FLD_HDR_SIZE); + memcpy(p->pn, vpd + pn, min(i, PN_LEN)); + strim(p->pn); + + /* + * Ask firmware for the Core Clock since it knows how to translate the + * Reference Clock ('V2') VPD field into a Core Clock value ... + */ + cclk_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CCLK)); + ret = t4_query_params(adapter, adapter->mbox, 0, 0, + 1, &cclk_param, &cclk_val); + +out: + vfree(vpd); + if (ret) + return ret; + p->cclk = cclk_val; + + return 0; +} + +/* serial flash and firmware constants */ +enum { + SF_ATTEMPTS = 10, /* max retries for SF operations */ + + /* flash command opcodes */ + SF_PROG_PAGE = 2, /* program page */ + SF_WR_DISABLE = 4, /* disable writes */ + SF_RD_STATUS = 5, /* read status register */ + SF_WR_ENABLE = 6, /* enable writes */ + SF_RD_DATA_FAST = 0xb, /* read flash */ + SF_RD_ID = 0x9f, /* read ID */ + SF_ERASE_SECTOR = 0xd8, /* erase sector */ + + FW_MAX_SIZE = 16 * SF_SEC_SIZE, +}; + +/** + * sf1_read - read data from the serial flash + * @adapter: the adapter + * @byte_cnt: number of bytes to read + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @valp: where to store the read data + * + * Reads up to 4 bytes of data from the serial flash. The location of + * the read needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont, + int lock, u32 *valp) +{ + int ret; + + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (t4_read_reg(adapter, SF_OP_A) & SF_BUSY_F) + return -EBUSY; + t4_write_reg(adapter, SF_OP_A, SF_LOCK_V(lock) | + SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1)); + ret = t4_wait_op_done(adapter, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 5); + if (!ret) + *valp = t4_read_reg(adapter, SF_DATA_A); + return ret; +} + +/** + * sf1_write - write data to the serial flash + * @adapter: the adapter + * @byte_cnt: number of bytes to write + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @val: value to write + * + * Writes up to 4 bytes of data to the serial flash. The location of + * the write needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont, + int lock, u32 val) +{ + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (t4_read_reg(adapter, SF_OP_A) & SF_BUSY_F) + return -EBUSY; + t4_write_reg(adapter, SF_DATA_A, val); + t4_write_reg(adapter, SF_OP_A, SF_LOCK_V(lock) | + SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1) | OP_V(1)); + return t4_wait_op_done(adapter, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 5); +} + +/** + * flash_wait_op - wait for a flash operation to complete + * @adapter: the adapter + * @attempts: max number of polls of the status register + * @delay: delay between polls in ms + * + * Wait for a flash operation to complete by polling the status register. + */ +static int flash_wait_op(struct adapter *adapter, int attempts, int delay) +{ + int ret; + u32 status; + + while (1) { + if ((ret = sf1_write(adapter, 1, 1, 1, SF_RD_STATUS)) != 0 || + (ret = sf1_read(adapter, 1, 0, 1, &status)) != 0) + return ret; + if (!(status & 1)) + return 0; + if (--attempts == 0) + return -EAGAIN; + if (delay) + msleep(delay); + } +} + +/** + * t4_read_flash - read words from serial flash + * @adapter: the adapter + * @addr: the start address for the read + * @nwords: how many 32-bit words to read + * @data: where to store the read data + * @byte_oriented: whether to store data as bytes or as words + * + * Read the specified number of 32-bit words from the serial flash. + * If @byte_oriented is set the read data is stored as a byte array + * (i.e., big-endian), otherwise as 32-bit words in the platform's + * natural endianness. + */ +int t4_read_flash(struct adapter *adapter, unsigned int addr, + unsigned int nwords, u32 *data, int byte_oriented) +{ + int ret; + + if (addr + nwords * sizeof(u32) > adapter->params.sf_size || (addr & 3)) + return -EINVAL; + + addr = swab32(addr) | SF_RD_DATA_FAST; + + if ((ret = sf1_write(adapter, 4, 1, 0, addr)) != 0 || + (ret = sf1_read(adapter, 1, 1, 0, data)) != 0) + return ret; + + for ( ; nwords; nwords--, data++) { + ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data); + if (nwords == 1) + t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */ + if (ret) + return ret; + if (byte_oriented) + *data = (__force __u32) (htonl(*data)); + } + return 0; +} + +/** + * t4_write_flash - write up to a page of data to the serial flash + * @adapter: the adapter + * @addr: the start address to write + * @n: length of data to write in bytes + * @data: the data to write + * + * Writes up to a page of data (256 bytes) to the serial flash starting + * at the given address. All the data must be written to the same page. + */ +static int t4_write_flash(struct adapter *adapter, unsigned int addr, + unsigned int n, const u8 *data) +{ + int ret; + u32 buf[64]; + unsigned int i, c, left, val, offset = addr & 0xff; + + if (addr >= adapter->params.sf_size || offset + n > SF_PAGE_SIZE) + return -EINVAL; + + val = swab32(addr) | SF_PROG_PAGE; + + if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || + (ret = sf1_write(adapter, 4, 1, 1, val)) != 0) + goto unlock; + + for (left = n; left; left -= c) { + c = min(left, 4U); + for (val = 0, i = 0; i < c; ++i) + val = (val << 8) + *data++; + + ret = sf1_write(adapter, c, c != left, 1, val); + if (ret) + goto unlock; + } + ret = flash_wait_op(adapter, 8, 1); + if (ret) + goto unlock; + + t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */ + + /* Read the page to verify the write succeeded */ + ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1); + if (ret) + return ret; + + if (memcmp(data - n, (u8 *)buf + offset, n)) { + dev_err(adapter->pdev_dev, + "failed to correctly write the flash page at %#x\n", + addr); + return -EIO; + } + return 0; + +unlock: + t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */ + return ret; +} + +/** + * t4_get_fw_version - read the firmware version + * @adapter: the adapter + * @vers: where to place the version + * + * Reads the FW version from flash. + */ +int t4_get_fw_version(struct adapter *adapter, u32 *vers) +{ + return t4_read_flash(adapter, FLASH_FW_START + + offsetof(struct fw_hdr, fw_ver), 1, + vers, 0); +} + +/** + * t4_get_tp_version - read the TP microcode version + * @adapter: the adapter + * @vers: where to place the version + * + * Reads the TP microcode version from flash. + */ +int t4_get_tp_version(struct adapter *adapter, u32 *vers) +{ + return t4_read_flash(adapter, FLASH_FW_START + + offsetof(struct fw_hdr, tp_microcode_ver), + 1, vers, 0); +} + +/** + * t4_get_exprom_version - return the Expansion ROM version (if any) + * @adapter: the adapter + * @vers: where to place the version + * + * Reads the Expansion ROM header from FLASH and returns the version + * number (if present) through the @vers return value pointer. We return + * this in the Firmware Version Format since it's convenient. Return + * 0 on success, -ENOENT if no Expansion ROM is present. + */ +int t4_get_exprom_version(struct adapter *adap, u32 *vers) +{ + struct exprom_header { + unsigned char hdr_arr[16]; /* must start with 0x55aa */ + unsigned char hdr_ver[4]; /* Expansion ROM version */ + } *hdr; + u32 exprom_header_buf[DIV_ROUND_UP(sizeof(struct exprom_header), + sizeof(u32))]; + int ret; + + ret = t4_read_flash(adap, FLASH_EXP_ROM_START, + ARRAY_SIZE(exprom_header_buf), exprom_header_buf, + 0); + if (ret) + return ret; + + hdr = (struct exprom_header *)exprom_header_buf; + if (hdr->hdr_arr[0] != 0x55 || hdr->hdr_arr[1] != 0xaa) + return -ENOENT; + + *vers = (FW_HDR_FW_VER_MAJOR_V(hdr->hdr_ver[0]) | + FW_HDR_FW_VER_MINOR_V(hdr->hdr_ver[1]) | + FW_HDR_FW_VER_MICRO_V(hdr->hdr_ver[2]) | + FW_HDR_FW_VER_BUILD_V(hdr->hdr_ver[3])); + return 0; +} + +/* Is the given firmware API compatible with the one the driver was compiled + * with? + */ +static int fw_compatible(const struct fw_hdr *hdr1, const struct fw_hdr *hdr2) +{ + + /* short circuit if it's the exact same firmware version */ + if (hdr1->chip == hdr2->chip && hdr1->fw_ver == hdr2->fw_ver) + return 1; + +#define SAME_INTF(x) (hdr1->intfver_##x == hdr2->intfver_##x) + if (hdr1->chip == hdr2->chip && SAME_INTF(nic) && SAME_INTF(vnic) && + SAME_INTF(ri) && SAME_INTF(iscsi) && SAME_INTF(fcoe)) + return 1; +#undef SAME_INTF + + return 0; +} + +/* The firmware in the filesystem is usable, but should it be installed? + * This routine explains itself in detail if it indicates the filesystem + * firmware should be installed. + */ +static int should_install_fs_fw(struct adapter *adap, int card_fw_usable, + int k, int c) +{ + const char *reason; + + if (!card_fw_usable) { + reason = "incompatible or unusable"; + goto install; + } + + if (k > c) { + reason = "older than the version supported with this driver"; + goto install; + } + + return 0; + +install: + dev_err(adap->pdev_dev, "firmware on card (%u.%u.%u.%u) is %s, " + "installing firmware %u.%u.%u.%u on card.\n", + FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c), + FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), reason, + FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), + FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); + + return 1; +} + +int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info, + const u8 *fw_data, unsigned int fw_size, + struct fw_hdr *card_fw, enum dev_state state, + int *reset) +{ + int ret, card_fw_usable, fs_fw_usable; + const struct fw_hdr *fs_fw; + const struct fw_hdr *drv_fw; + + drv_fw = &fw_info->fw_hdr; + + /* Read the header of the firmware on the card */ + ret = -t4_read_flash(adap, FLASH_FW_START, + sizeof(*card_fw) / sizeof(uint32_t), + (uint32_t *)card_fw, 1); + if (ret == 0) { + card_fw_usable = fw_compatible(drv_fw, (const void *)card_fw); + } else { + dev_err(adap->pdev_dev, + "Unable to read card's firmware header: %d\n", ret); + card_fw_usable = 0; + } + + if (fw_data != NULL) { + fs_fw = (const void *)fw_data; + fs_fw_usable = fw_compatible(drv_fw, fs_fw); + } else { + fs_fw = NULL; + fs_fw_usable = 0; + } + + if (card_fw_usable && card_fw->fw_ver == drv_fw->fw_ver && + (!fs_fw_usable || fs_fw->fw_ver == drv_fw->fw_ver)) { + /* Common case: the firmware on the card is an exact match and + * the filesystem one is an exact match too, or the filesystem + * one is absent/incompatible. + */ + } else if (fs_fw_usable && state == DEV_STATE_UNINIT && + should_install_fs_fw(adap, card_fw_usable, + be32_to_cpu(fs_fw->fw_ver), + be32_to_cpu(card_fw->fw_ver))) { + ret = -t4_fw_upgrade(adap, adap->mbox, fw_data, + fw_size, 0); + if (ret != 0) { + dev_err(adap->pdev_dev, + "failed to install firmware: %d\n", ret); + goto bye; + } + + /* Installed successfully, update the cached header too. */ + *card_fw = *fs_fw; + card_fw_usable = 1; + *reset = 0; /* already reset as part of load_fw */ + } + + if (!card_fw_usable) { + uint32_t d, c, k; + + d = be32_to_cpu(drv_fw->fw_ver); + c = be32_to_cpu(card_fw->fw_ver); + k = fs_fw ? be32_to_cpu(fs_fw->fw_ver) : 0; + + dev_err(adap->pdev_dev, "Cannot find a usable firmware: " + "chip state %d, " + "driver compiled with %d.%d.%d.%d, " + "card has %d.%d.%d.%d, filesystem has %d.%d.%d.%d\n", + state, + FW_HDR_FW_VER_MAJOR_G(d), FW_HDR_FW_VER_MINOR_G(d), + FW_HDR_FW_VER_MICRO_G(d), FW_HDR_FW_VER_BUILD_G(d), + FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c), + FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), + FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), + FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); + ret = EINVAL; + goto bye; + } + + /* We're using whatever's on the card and it's known to be good. */ + adap->params.fw_vers = be32_to_cpu(card_fw->fw_ver); + adap->params.tp_vers = be32_to_cpu(card_fw->tp_microcode_ver); + +bye: + return ret; +} + +/** + * t4_flash_erase_sectors - erase a range of flash sectors + * @adapter: the adapter + * @start: the first sector to erase + * @end: the last sector to erase + * + * Erases the sectors in the given inclusive range. + */ +static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end) +{ + int ret = 0; + + if (end >= adapter->params.sf_nsec) + return -EINVAL; + + while (start <= end) { + if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || + (ret = sf1_write(adapter, 4, 0, 1, + SF_ERASE_SECTOR | (start << 8))) != 0 || + (ret = flash_wait_op(adapter, 14, 500)) != 0) { + dev_err(adapter->pdev_dev, + "erase of flash sector %d failed, error %d\n", + start, ret); + break; + } + start++; + } + t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */ + return ret; +} + +/** + * t4_flash_cfg_addr - return the address of the flash configuration file + * @adapter: the adapter + * + * Return the address within the flash where the Firmware Configuration + * File is stored. + */ +unsigned int t4_flash_cfg_addr(struct adapter *adapter) +{ + if (adapter->params.sf_size == 0x100000) + return FLASH_FPGA_CFG_START; + else + return FLASH_CFG_START; +} + +/* Return TRUE if the specified firmware matches the adapter. I.e. T4 + * firmware for T4 adapters, T5 firmware for T5 adapters, etc. We go ahead + * and emit an error message for mismatched firmware to save our caller the + * effort ... + */ +static bool t4_fw_matches_chip(const struct adapter *adap, + const struct fw_hdr *hdr) +{ + /* The expression below will return FALSE for any unsupported adapter + * which will keep us "honest" in the future ... + */ + if ((is_t4(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T4) || + (is_t5(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T5)) + return true; + + dev_err(adap->pdev_dev, + "FW image (%d) is not suitable for this adapter (%d)\n", + hdr->chip, CHELSIO_CHIP_VERSION(adap->params.chip)); + return false; +} + +/** + * t4_load_fw - download firmware + * @adap: the adapter + * @fw_data: the firmware image to write + * @size: image size + * + * Write the supplied firmware image to the card's serial flash. + */ +int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size) +{ + u32 csum; + int ret, addr; + unsigned int i; + u8 first_page[SF_PAGE_SIZE]; + const __be32 *p = (const __be32 *)fw_data; + const struct fw_hdr *hdr = (const struct fw_hdr *)fw_data; + unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; + unsigned int fw_img_start = adap->params.sf_fw_start; + unsigned int fw_start_sec = fw_img_start / sf_sec_size; + + if (!size) { + dev_err(adap->pdev_dev, "FW image has no data\n"); + return -EINVAL; + } + if (size & 511) { + dev_err(adap->pdev_dev, + "FW image size not multiple of 512 bytes\n"); + return -EINVAL; + } + if (ntohs(hdr->len512) * 512 != size) { + dev_err(adap->pdev_dev, + "FW image size differs from size in FW header\n"); + return -EINVAL; + } + if (size > FW_MAX_SIZE) { + dev_err(adap->pdev_dev, "FW image too large, max is %u bytes\n", + FW_MAX_SIZE); + return -EFBIG; + } + if (!t4_fw_matches_chip(adap, hdr)) + return -EINVAL; + + for (csum = 0, i = 0; i < size / sizeof(csum); i++) + csum += ntohl(p[i]); + + if (csum != 0xffffffff) { + dev_err(adap->pdev_dev, + "corrupted firmware image, checksum %#x\n", csum); + return -EINVAL; + } + + i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */ + ret = t4_flash_erase_sectors(adap, fw_start_sec, fw_start_sec + i - 1); + if (ret) + goto out; + + /* + * We write the correct version at the end so the driver can see a bad + * version if the FW write fails. Start by writing a copy of the + * first page with a bad version. + */ + memcpy(first_page, fw_data, SF_PAGE_SIZE); + ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff); + ret = t4_write_flash(adap, fw_img_start, SF_PAGE_SIZE, first_page); + if (ret) + goto out; + + addr = fw_img_start; + for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { + addr += SF_PAGE_SIZE; + fw_data += SF_PAGE_SIZE; + ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data); + if (ret) + goto out; + } + + ret = t4_write_flash(adap, + fw_img_start + offsetof(struct fw_hdr, fw_ver), + sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver); +out: + if (ret) + dev_err(adap->pdev_dev, "firmware download failed, error %d\n", + ret); + else + ret = t4_get_fw_version(adap, &adap->params.fw_vers); + return ret; +} + +/** + * t4_fwcache - firmware cache operation + * @adap: the adapter + * @op : the operation (flush or flush and invalidate) + */ +int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op) +{ + struct fw_params_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = + cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) | + FW_CMD_REQUEST_F | FW_CMD_WRITE_F | + FW_PARAMS_CMD_PFN_V(adap->fn) | + FW_PARAMS_CMD_VFN_V(0)); + c.retval_len16 = cpu_to_be32(FW_LEN16(c)); + c.param[0].mnem = + cpu_to_be32(FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FWCACHE)); + c.param[0].val = (__force __be32)op; + + return t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), NULL); +} + +void t4_ulprx_read_la(struct adapter *adap, u32 *la_buf) +{ + unsigned int i, j; + + for (i = 0; i < 8; i++) { + u32 *p = la_buf + i; + + t4_write_reg(adap, ULP_RX_LA_CTL_A, i); + j = t4_read_reg(adap, ULP_RX_LA_WRPTR_A); + t4_write_reg(adap, ULP_RX_LA_RDPTR_A, j); + for (j = 0; j < ULPRX_LA_SIZE; j++, p += 8) + *p = t4_read_reg(adap, ULP_RX_LA_RDDATA_A); + } +} + +#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ + FW_PORT_CAP_ANEG) + +/** + * t4_link_start - apply link configuration to MAC/PHY + * @phy: the PHY to setup + * @mac: the MAC to setup + * @lc: the requested link configuration + * + * Set up a port's MAC and PHY according to a desired link configuration. + * - If the PHY can auto-negotiate first decide what to advertise, then + * enable/disable auto-negotiation as desired, and reset. + * - If the PHY does not auto-negotiate just reset it. + * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC, + * otherwise do it later based on the outcome of auto-negotiation. + */ +int t4_link_start(struct adapter *adap, unsigned int mbox, unsigned int port, + struct link_config *lc) +{ + struct fw_port_cmd c; + unsigned int fc = 0, mdi = FW_PORT_CAP_MDI_V(FW_PORT_CAP_MDI_AUTO); + + lc->link_ok = 0; + if (lc->requested_fc & PAUSE_RX) + fc |= FW_PORT_CAP_FC_RX; + if (lc->requested_fc & PAUSE_TX) + fc |= FW_PORT_CAP_FC_TX; + + memset(&c, 0, sizeof(c)); + c.op_to_portid = htonl(FW_CMD_OP_V(FW_PORT_CMD) | FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | FW_PORT_CMD_PORTID_V(port)); + c.action_to_len16 = htonl(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_L1_CFG) | + FW_LEN16(c)); + + if (!(lc->supported & FW_PORT_CAP_ANEG)) { + c.u.l1cfg.rcap = htonl((lc->supported & ADVERT_MASK) | fc); + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + } else if (lc->autoneg == AUTONEG_DISABLE) { + c.u.l1cfg.rcap = htonl(lc->requested_speed | fc | mdi); + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + } else + c.u.l1cfg.rcap = htonl(lc->advertising | fc | mdi); + + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_restart_aneg - restart autonegotiation + * @adap: the adapter + * @mbox: mbox to use for the FW command + * @port: the port id + * + * Restarts autonegotiation for the selected port. + */ +int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port) +{ + struct fw_port_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_portid = htonl(FW_CMD_OP_V(FW_PORT_CMD) | FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | FW_PORT_CMD_PORTID_V(port)); + c.action_to_len16 = htonl(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_L1_CFG) | + FW_LEN16(c)); + c.u.l1cfg.rcap = htonl(FW_PORT_CAP_ANEG); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +typedef void (*int_handler_t)(struct adapter *adap); + +struct intr_info { + unsigned int mask; /* bits to check in interrupt status */ + const char *msg; /* message to print or NULL */ + short stat_idx; /* stat counter to increment or -1 */ + unsigned short fatal; /* whether the condition reported is fatal */ + int_handler_t int_handler; /* platform-specific int handler */ +}; + +/** + * t4_handle_intr_status - table driven interrupt handler + * @adapter: the adapter that generated the interrupt + * @reg: the interrupt status register to process + * @acts: table of interrupt actions + * + * A table driven interrupt handler that applies a set of masks to an + * interrupt status word and performs the corresponding actions if the + * interrupts described by the mask have occurred. The actions include + * optionally emitting a warning or alert message. The table is terminated + * by an entry specifying mask 0. Returns the number of fatal interrupt + * conditions. + */ +static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg, + const struct intr_info *acts) +{ + int fatal = 0; + unsigned int mask = 0; + unsigned int status = t4_read_reg(adapter, reg); + + for ( ; acts->mask; ++acts) { + if (!(status & acts->mask)) + continue; + if (acts->fatal) { + fatal++; + dev_alert(adapter->pdev_dev, "%s (0x%x)\n", acts->msg, + status & acts->mask); + } else if (acts->msg && printk_ratelimit()) + dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg, + status & acts->mask); + if (acts->int_handler) + acts->int_handler(adapter); + mask |= acts->mask; + } + status &= mask; + if (status) /* clear processed interrupts */ + t4_write_reg(adapter, reg, status); + return fatal; +} + +/* + * Interrupt handler for the PCIE module. + */ +static void pcie_intr_handler(struct adapter *adapter) +{ + static const struct intr_info sysbus_intr_info[] = { + { RNPP_F, "RXNP array parity error", -1, 1 }, + { RPCP_F, "RXPC array parity error", -1, 1 }, + { RCIP_F, "RXCIF array parity error", -1, 1 }, + { RCCP_F, "Rx completions control array parity error", -1, 1 }, + { RFTP_F, "RXFT array parity error", -1, 1 }, + { 0 } + }; + static const struct intr_info pcie_port_intr_info[] = { + { TPCP_F, "TXPC array parity error", -1, 1 }, + { TNPP_F, "TXNP array parity error", -1, 1 }, + { TFTP_F, "TXFT array parity error", -1, 1 }, + { TCAP_F, "TXCA array parity error", -1, 1 }, + { TCIP_F, "TXCIF array parity error", -1, 1 }, + { RCAP_F, "RXCA array parity error", -1, 1 }, + { OTDD_F, "outbound request TLP discarded", -1, 1 }, + { RDPE_F, "Rx data parity error", -1, 1 }, + { TDUE_F, "Tx uncorrectable data error", -1, 1 }, + { 0 } + }; + static const struct intr_info pcie_intr_info[] = { + { MSIADDRLPERR_F, "MSI AddrL parity error", -1, 1 }, + { MSIADDRHPERR_F, "MSI AddrH parity error", -1, 1 }, + { MSIDATAPERR_F, "MSI data parity error", -1, 1 }, + { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 }, + { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 }, + { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 }, + { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 }, + { PIOCPLPERR_F, "PCI PIO completion FIFO parity error", -1, 1 }, + { PIOREQPERR_F, "PCI PIO request FIFO parity error", -1, 1 }, + { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 }, + { CCNTPERR_F, "PCI CMD channel count parity error", -1, 1 }, + { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 }, + { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 }, + { DCNTPERR_F, "PCI DMA channel count parity error", -1, 1 }, + { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 }, + { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 }, + { HCNTPERR_F, "PCI HMA channel count parity error", -1, 1 }, + { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 }, + { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 }, + { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 }, + { FIDPERR_F, "PCI FID parity error", -1, 1 }, + { INTXCLRPERR_F, "PCI INTx clear parity error", -1, 1 }, + { MATAGPERR_F, "PCI MA tag parity error", -1, 1 }, + { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 }, + { RXCPLPERR_F, "PCI Rx completion parity error", -1, 1 }, + { RXWRPERR_F, "PCI Rx write parity error", -1, 1 }, + { RPLPERR_F, "PCI replay buffer parity error", -1, 1 }, + { PCIESINT_F, "PCI core secondary fault", -1, 1 }, + { PCIEPINT_F, "PCI core primary fault", -1, 1 }, + { UNXSPLCPLERR_F, "PCI unexpected split completion error", + -1, 0 }, + { 0 } + }; + + static struct intr_info t5_pcie_intr_info[] = { + { MSTGRPPERR_F, "Master Response Read Queue parity error", + -1, 1 }, + { MSTTIMEOUTPERR_F, "Master Timeout FIFO parity error", -1, 1 }, + { MSIXSTIPERR_F, "MSI-X STI SRAM parity error", -1, 1 }, + { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 }, + { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 }, + { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 }, + { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 }, + { PIOCPLGRPPERR_F, "PCI PIO completion Group FIFO parity error", + -1, 1 }, + { PIOREQGRPPERR_F, "PCI PIO request Group FIFO parity error", + -1, 1 }, + { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 }, + { MSTTAGQPERR_F, "PCI master tag queue parity error", -1, 1 }, + { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 }, + { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 }, + { DREQWRPERR_F, "PCI DMA channel write request parity error", + -1, 1 }, + { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 }, + { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 }, + { HREQWRPERR_F, "PCI HMA channel count parity error", -1, 1 }, + { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 }, + { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 }, + { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 }, + { FIDPERR_F, "PCI FID parity error", -1, 1 }, + { VFIDPERR_F, "PCI INTx clear parity error", -1, 1 }, + { MAGRPPERR_F, "PCI MA group FIFO parity error", -1, 1 }, + { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 }, + { IPRXHDRGRPPERR_F, "PCI IP Rx header group parity error", + -1, 1 }, + { IPRXDATAGRPPERR_F, "PCI IP Rx data group parity error", + -1, 1 }, + { RPLPERR_F, "PCI IP replay buffer parity error", -1, 1 }, + { IPSOTPERR_F, "PCI IP SOT buffer parity error", -1, 1 }, + { TRGT1GRPPERR_F, "PCI TRGT1 group FIFOs parity error", -1, 1 }, + { READRSPERR_F, "Outbound read error", -1, 0 }, + { 0 } + }; + + int fat; + + if (is_t4(adapter->params.chip)) + fat = t4_handle_intr_status(adapter, + PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS_A, + sysbus_intr_info) + + t4_handle_intr_status(adapter, + PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS_A, + pcie_port_intr_info) + + t4_handle_intr_status(adapter, PCIE_INT_CAUSE_A, + pcie_intr_info); + else + fat = t4_handle_intr_status(adapter, PCIE_INT_CAUSE_A, + t5_pcie_intr_info); + + if (fat) + t4_fatal_err(adapter); +} + +/* + * TP interrupt handler. + */ +static void tp_intr_handler(struct adapter *adapter) +{ + static const struct intr_info tp_intr_info[] = { + { 0x3fffffff, "TP parity error", -1, 1 }, + { FLMTXFLSTEMPTY_F, "TP out of Tx pages", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adapter, TP_INT_CAUSE_A, tp_intr_info)) + t4_fatal_err(adapter); +} + +/* + * SGE interrupt handler. + */ +static void sge_intr_handler(struct adapter *adapter) +{ + u64 v; + + static const struct intr_info sge_intr_info[] = { + { ERR_CPL_EXCEED_IQE_SIZE_F, + "SGE received CPL exceeding IQE size", -1, 1 }, + { ERR_INVALID_CIDX_INC_F, + "SGE GTS CIDX increment too large", -1, 0 }, + { ERR_CPL_OPCODE_0_F, "SGE received 0-length CPL", -1, 0 }, + { DBFIFO_LP_INT_F, NULL, -1, 0, t4_db_full }, + { DBFIFO_HP_INT_F, NULL, -1, 0, t4_db_full }, + { ERR_DROPPED_DB_F, NULL, -1, 0, t4_db_dropped }, + { ERR_DATA_CPL_ON_HIGH_QID1_F | ERR_DATA_CPL_ON_HIGH_QID0_F, + "SGE IQID > 1023 received CPL for FL", -1, 0 }, + { ERR_BAD_DB_PIDX3_F, "SGE DBP 3 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX2_F, "SGE DBP 2 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX1_F, "SGE DBP 1 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX0_F, "SGE DBP 0 pidx increment too large", -1, + 0 }, + { ERR_ING_CTXT_PRIO_F, + "SGE too many priority ingress contexts", -1, 0 }, + { ERR_EGR_CTXT_PRIO_F, + "SGE too many priority egress contexts", -1, 0 }, + { INGRESS_SIZE_ERR_F, "SGE illegal ingress QID", -1, 0 }, + { EGRESS_SIZE_ERR_F, "SGE illegal egress QID", -1, 0 }, + { 0 } + }; + + v = (u64)t4_read_reg(adapter, SGE_INT_CAUSE1_A) | + ((u64)t4_read_reg(adapter, SGE_INT_CAUSE2_A) << 32); + if (v) { + dev_alert(adapter->pdev_dev, "SGE parity error (%#llx)\n", + (unsigned long long)v); + t4_write_reg(adapter, SGE_INT_CAUSE1_A, v); + t4_write_reg(adapter, SGE_INT_CAUSE2_A, v >> 32); + } + + if (t4_handle_intr_status(adapter, SGE_INT_CAUSE3_A, sge_intr_info) || + v != 0) + t4_fatal_err(adapter); +} + +#define CIM_OBQ_INTR (OBQULP0PARERR_F | OBQULP1PARERR_F | OBQULP2PARERR_F |\ + OBQULP3PARERR_F | OBQSGEPARERR_F | OBQNCSIPARERR_F) +#define CIM_IBQ_INTR (IBQTP0PARERR_F | IBQTP1PARERR_F | IBQULPPARERR_F |\ + IBQSGEHIPARERR_F | IBQSGELOPARERR_F | IBQNCSIPARERR_F) + +/* + * CIM interrupt handler. + */ +static void cim_intr_handler(struct adapter *adapter) +{ + static const struct intr_info cim_intr_info[] = { + { PREFDROPINT_F, "CIM control register prefetch drop", -1, 1 }, + { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 }, + { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 }, + { MBUPPARERR_F, "CIM mailbox uP parity error", -1, 1 }, + { MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 }, + { TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 }, + { TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 }, + { 0 } + }; + static const struct intr_info cim_upintr_info[] = { + { RSVDSPACEINT_F, "CIM reserved space access", -1, 1 }, + { ILLTRANSINT_F, "CIM illegal transaction", -1, 1 }, + { ILLWRINT_F, "CIM illegal write", -1, 1 }, + { ILLRDINT_F, "CIM illegal read", -1, 1 }, + { ILLRDBEINT_F, "CIM illegal read BE", -1, 1 }, + { ILLWRBEINT_F, "CIM illegal write BE", -1, 1 }, + { SGLRDBOOTINT_F, "CIM single read from boot space", -1, 1 }, + { SGLWRBOOTINT_F, "CIM single write to boot space", -1, 1 }, + { BLKWRBOOTINT_F, "CIM block write to boot space", -1, 1 }, + { SGLRDFLASHINT_F, "CIM single read from flash space", -1, 1 }, + { SGLWRFLASHINT_F, "CIM single write to flash space", -1, 1 }, + { BLKWRFLASHINT_F, "CIM block write to flash space", -1, 1 }, + { SGLRDEEPROMINT_F, "CIM single EEPROM read", -1, 1 }, + { SGLWREEPROMINT_F, "CIM single EEPROM write", -1, 1 }, + { BLKRDEEPROMINT_F, "CIM block EEPROM read", -1, 1 }, + { BLKWREEPROMINT_F, "CIM block EEPROM write", -1, 1 }, + { SGLRDCTLINT_F, "CIM single read from CTL space", -1, 1 }, + { SGLWRCTLINT_F, "CIM single write to CTL space", -1, 1 }, + { BLKRDCTLINT_F, "CIM block read from CTL space", -1, 1 }, + { BLKWRCTLINT_F, "CIM block write to CTL space", -1, 1 }, + { SGLRDPLINT_F, "CIM single read from PL space", -1, 1 }, + { SGLWRPLINT_F, "CIM single write to PL space", -1, 1 }, + { BLKRDPLINT_F, "CIM block read from PL space", -1, 1 }, + { BLKWRPLINT_F, "CIM block write to PL space", -1, 1 }, + { REQOVRLOOKUPINT_F, "CIM request FIFO overwrite", -1, 1 }, + { RSPOVRLOOKUPINT_F, "CIM response FIFO overwrite", -1, 1 }, + { TIMEOUTINT_F, "CIM PIF timeout", -1, 1 }, + { TIMEOUTMAINT_F, "CIM PIF MA timeout", -1, 1 }, + { 0 } + }; + + int fat; + + if (t4_read_reg(adapter, PCIE_FW_A) & PCIE_FW_ERR_F) + t4_report_fw_error(adapter); + + fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE_A, + cim_intr_info) + + t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE_A, + cim_upintr_info); + if (fat) + t4_fatal_err(adapter); +} + +/* + * ULP RX interrupt handler. + */ +static void ulprx_intr_handler(struct adapter *adapter) +{ + static const struct intr_info ulprx_intr_info[] = { + { 0x1800000, "ULPRX context error", -1, 1 }, + { 0x7fffff, "ULPRX parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adapter, ULP_RX_INT_CAUSE_A, ulprx_intr_info)) + t4_fatal_err(adapter); +} + +/* + * ULP TX interrupt handler. + */ +static void ulptx_intr_handler(struct adapter *adapter) +{ + static const struct intr_info ulptx_intr_info[] = { + { PBL_BOUND_ERR_CH3_F, "ULPTX channel 3 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH2_F, "ULPTX channel 2 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH1_F, "ULPTX channel 1 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH0_F, "ULPTX channel 0 PBL out of bounds", -1, + 0 }, + { 0xfffffff, "ULPTX parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adapter, ULP_TX_INT_CAUSE_A, ulptx_intr_info)) + t4_fatal_err(adapter); +} + +/* + * PM TX interrupt handler. + */ +static void pmtx_intr_handler(struct adapter *adapter) +{ + static const struct intr_info pmtx_intr_info[] = { + { PCMD_LEN_OVFL0_F, "PMTX channel 0 pcmd too large", -1, 1 }, + { PCMD_LEN_OVFL1_F, "PMTX channel 1 pcmd too large", -1, 1 }, + { PCMD_LEN_OVFL2_F, "PMTX channel 2 pcmd too large", -1, 1 }, + { ZERO_C_CMD_ERROR_F, "PMTX 0-length pcmd", -1, 1 }, + { PMTX_FRAMING_ERROR_F, "PMTX framing error", -1, 1 }, + { OESPI_PAR_ERROR_F, "PMTX oespi parity error", -1, 1 }, + { DB_OPTIONS_PAR_ERROR_F, "PMTX db_options parity error", + -1, 1 }, + { ICSPI_PAR_ERROR_F, "PMTX icspi parity error", -1, 1 }, + { PMTX_C_PCMD_PAR_ERROR_F, "PMTX c_pcmd parity error", -1, 1}, + { 0 } + }; + + if (t4_handle_intr_status(adapter, PM_TX_INT_CAUSE_A, pmtx_intr_info)) + t4_fatal_err(adapter); +} + +/* + * PM RX interrupt handler. + */ +static void pmrx_intr_handler(struct adapter *adapter) +{ + static const struct intr_info pmrx_intr_info[] = { + { ZERO_E_CMD_ERROR_F, "PMRX 0-length pcmd", -1, 1 }, + { PMRX_FRAMING_ERROR_F, "PMRX framing error", -1, 1 }, + { OCSPI_PAR_ERROR_F, "PMRX ocspi parity error", -1, 1 }, + { DB_OPTIONS_PAR_ERROR_F, "PMRX db_options parity error", + -1, 1 }, + { IESPI_PAR_ERROR_F, "PMRX iespi parity error", -1, 1 }, + { PMRX_E_PCMD_PAR_ERROR_F, "PMRX e_pcmd parity error", -1, 1}, + { 0 } + }; + + if (t4_handle_intr_status(adapter, PM_RX_INT_CAUSE_A, pmrx_intr_info)) + t4_fatal_err(adapter); +} + +/* + * CPL switch interrupt handler. + */ +static void cplsw_intr_handler(struct adapter *adapter) +{ + static const struct intr_info cplsw_intr_info[] = { + { CIM_OP_MAP_PERR_F, "CPLSW CIM op_map parity error", -1, 1 }, + { CIM_OVFL_ERROR_F, "CPLSW CIM overflow", -1, 1 }, + { TP_FRAMING_ERROR_F, "CPLSW TP framing error", -1, 1 }, + { SGE_FRAMING_ERROR_F, "CPLSW SGE framing error", -1, 1 }, + { CIM_FRAMING_ERROR_F, "CPLSW CIM framing error", -1, 1 }, + { ZERO_SWITCH_ERROR_F, "CPLSW no-switch error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adapter, CPL_INTR_CAUSE_A, cplsw_intr_info)) + t4_fatal_err(adapter); +} + +/* + * LE interrupt handler. + */ +static void le_intr_handler(struct adapter *adap) +{ + static const struct intr_info le_intr_info[] = { + { LIPMISS_F, "LE LIP miss", -1, 0 }, + { LIP0_F, "LE 0 LIP error", -1, 0 }, + { PARITYERR_F, "LE parity error", -1, 1 }, + { UNKNOWNCMD_F, "LE unknown command", -1, 1 }, + { REQQPARERR_F, "LE request queue parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adap, LE_DB_INT_CAUSE_A, le_intr_info)) + t4_fatal_err(adap); +} + +/* + * MPS interrupt handler. + */ +static void mps_intr_handler(struct adapter *adapter) +{ + static const struct intr_info mps_rx_intr_info[] = { + { 0xffffff, "MPS Rx parity error", -1, 1 }, + { 0 } + }; + static const struct intr_info mps_tx_intr_info[] = { + { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 }, + { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 }, + { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error", + -1, 1 }, + { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error", + -1, 1 }, + { BUBBLE_F, "MPS Tx underflow", -1, 1 }, + { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 }, + { FRMERR_F, "MPS Tx framing error", -1, 1 }, + { 0 } + }; + static const struct intr_info mps_trc_intr_info[] = { + { FILTMEM_V(FILTMEM_M), "MPS TRC filter parity error", -1, 1 }, + { PKTFIFO_V(PKTFIFO_M), "MPS TRC packet FIFO parity error", + -1, 1 }, + { MISCPERR_F, "MPS TRC misc parity error", -1, 1 }, + { 0 } + }; + static const struct intr_info mps_stat_sram_intr_info[] = { + { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 }, + { 0 } + }; + static const struct intr_info mps_stat_tx_intr_info[] = { + { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 }, + { 0 } + }; + static const struct intr_info mps_stat_rx_intr_info[] = { + { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 }, + { 0 } + }; + static const struct intr_info mps_cls_intr_info[] = { + { MATCHSRAM_F, "MPS match SRAM parity error", -1, 1 }, + { MATCHTCAM_F, "MPS match TCAM parity error", -1, 1 }, + { HASHSRAM_F, "MPS hash SRAM parity error", -1, 1 }, + { 0 } + }; + + int fat; + + fat = t4_handle_intr_status(adapter, MPS_RX_PERR_INT_CAUSE_A, + mps_rx_intr_info) + + t4_handle_intr_status(adapter, MPS_TX_INT_CAUSE_A, + mps_tx_intr_info) + + t4_handle_intr_status(adapter, MPS_TRC_INT_CAUSE_A, + mps_trc_intr_info) + + t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_SRAM_A, + mps_stat_sram_intr_info) + + t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_TX_FIFO_A, + mps_stat_tx_intr_info) + + t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_RX_FIFO_A, + mps_stat_rx_intr_info) + + t4_handle_intr_status(adapter, MPS_CLS_INT_CAUSE_A, + mps_cls_intr_info); + + t4_write_reg(adapter, MPS_INT_CAUSE_A, 0); + t4_read_reg(adapter, MPS_INT_CAUSE_A); /* flush */ + if (fat) + t4_fatal_err(adapter); +} + +#define MEM_INT_MASK (PERR_INT_CAUSE_F | ECC_CE_INT_CAUSE_F | \ + ECC_UE_INT_CAUSE_F) + +/* + * EDC/MC interrupt handler. + */ +static void mem_intr_handler(struct adapter *adapter, int idx) +{ + static const char name[4][7] = { "EDC0", "EDC1", "MC/MC0", "MC1" }; + + unsigned int addr, cnt_addr, v; + + if (idx <= MEM_EDC1) { + addr = EDC_REG(EDC_INT_CAUSE_A, idx); + cnt_addr = EDC_REG(EDC_ECC_STATUS_A, idx); + } else if (idx == MEM_MC) { + if (is_t4(adapter->params.chip)) { + addr = MC_INT_CAUSE_A; + cnt_addr = MC_ECC_STATUS_A; + } else { + addr = MC_P_INT_CAUSE_A; + cnt_addr = MC_P_ECC_STATUS_A; + } + } else { + addr = MC_REG(MC_P_INT_CAUSE_A, 1); + cnt_addr = MC_REG(MC_P_ECC_STATUS_A, 1); + } + + v = t4_read_reg(adapter, addr) & MEM_INT_MASK; + if (v & PERR_INT_CAUSE_F) + dev_alert(adapter->pdev_dev, "%s FIFO parity error\n", + name[idx]); + if (v & ECC_CE_INT_CAUSE_F) { + u32 cnt = ECC_CECNT_G(t4_read_reg(adapter, cnt_addr)); + + t4_write_reg(adapter, cnt_addr, ECC_CECNT_V(ECC_CECNT_M)); + if (printk_ratelimit()) + dev_warn(adapter->pdev_dev, + "%u %s correctable ECC data error%s\n", + cnt, name[idx], cnt > 1 ? "s" : ""); + } + if (v & ECC_UE_INT_CAUSE_F) + dev_alert(adapter->pdev_dev, + "%s uncorrectable ECC data error\n", name[idx]); + + t4_write_reg(adapter, addr, v); + if (v & (PERR_INT_CAUSE_F | ECC_UE_INT_CAUSE_F)) + t4_fatal_err(adapter); +} + +/* + * MA interrupt handler. + */ +static void ma_intr_handler(struct adapter *adap) +{ + u32 v, status = t4_read_reg(adap, MA_INT_CAUSE_A); + + if (status & MEM_PERR_INT_CAUSE_F) { + dev_alert(adap->pdev_dev, + "MA parity error, parity status %#x\n", + t4_read_reg(adap, MA_PARITY_ERROR_STATUS1_A)); + if (is_t5(adap->params.chip)) + dev_alert(adap->pdev_dev, + "MA parity error, parity status %#x\n", + t4_read_reg(adap, + MA_PARITY_ERROR_STATUS2_A)); + } + if (status & MEM_WRAP_INT_CAUSE_F) { + v = t4_read_reg(adap, MA_INT_WRAP_STATUS_A); + dev_alert(adap->pdev_dev, "MA address wrap-around error by " + "client %u to address %#x\n", + MEM_WRAP_CLIENT_NUM_G(v), + MEM_WRAP_ADDRESS_G(v) << 4); + } + t4_write_reg(adap, MA_INT_CAUSE_A, status); + t4_fatal_err(adap); +} + +/* + * SMB interrupt handler. + */ +static void smb_intr_handler(struct adapter *adap) +{ + static const struct intr_info smb_intr_info[] = { + { MSTTXFIFOPARINT_F, "SMB master Tx FIFO parity error", -1, 1 }, + { MSTRXFIFOPARINT_F, "SMB master Rx FIFO parity error", -1, 1 }, + { SLVFIFOPARINT_F, "SMB slave FIFO parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adap, SMB_INT_CAUSE_A, smb_intr_info)) + t4_fatal_err(adap); +} + +/* + * NC-SI interrupt handler. + */ +static void ncsi_intr_handler(struct adapter *adap) +{ + static const struct intr_info ncsi_intr_info[] = { + { CIM_DM_PRTY_ERR_F, "NC-SI CIM parity error", -1, 1 }, + { MPS_DM_PRTY_ERR_F, "NC-SI MPS parity error", -1, 1 }, + { TXFIFO_PRTY_ERR_F, "NC-SI Tx FIFO parity error", -1, 1 }, + { RXFIFO_PRTY_ERR_F, "NC-SI Rx FIFO parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adap, NCSI_INT_CAUSE_A, ncsi_intr_info)) + t4_fatal_err(adap); +} + +/* + * XGMAC interrupt handler. + */ +static void xgmac_intr_handler(struct adapter *adap, int port) +{ + u32 v, int_cause_reg; + + if (is_t4(adap->params.chip)) + int_cause_reg = PORT_REG(port, XGMAC_PORT_INT_CAUSE_A); + else + int_cause_reg = T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A); + + v = t4_read_reg(adap, int_cause_reg); + + v &= TXFIFO_PRTY_ERR_F | RXFIFO_PRTY_ERR_F; + if (!v) + return; + + if (v & TXFIFO_PRTY_ERR_F) + dev_alert(adap->pdev_dev, "XGMAC %d Tx FIFO parity error\n", + port); + if (v & RXFIFO_PRTY_ERR_F) + dev_alert(adap->pdev_dev, "XGMAC %d Rx FIFO parity error\n", + port); + t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE_A), v); + t4_fatal_err(adap); +} + +/* + * PL interrupt handler. + */ +static void pl_intr_handler(struct adapter *adap) +{ + static const struct intr_info pl_intr_info[] = { + { FATALPERR_F, "T4 fatal parity error", -1, 1 }, + { PERRVFID_F, "PL VFID_MAP parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adap, PL_PL_INT_CAUSE_A, pl_intr_info)) + t4_fatal_err(adap); +} + +#define PF_INTR_MASK (PFSW_F) +#define GLBL_INTR_MASK (CIM_F | MPS_F | PL_F | PCIE_F | MC_F | EDC0_F | \ + EDC1_F | LE_F | TP_F | MA_F | PM_TX_F | PM_RX_F | ULP_RX_F | \ + CPL_SWITCH_F | SGE_F | ULP_TX_F) + +/** + * t4_slow_intr_handler - control path interrupt handler + * @adapter: the adapter + * + * T4 interrupt handler for non-data global interrupt events, e.g., errors. + * The designation 'slow' is because it involves register reads, while + * data interrupts typically don't involve any MMIOs. + */ +int t4_slow_intr_handler(struct adapter *adapter) +{ + u32 cause = t4_read_reg(adapter, PL_INT_CAUSE_A); + + if (!(cause & GLBL_INTR_MASK)) + return 0; + if (cause & CIM_F) + cim_intr_handler(adapter); + if (cause & MPS_F) + mps_intr_handler(adapter); + if (cause & NCSI_F) + ncsi_intr_handler(adapter); + if (cause & PL_F) + pl_intr_handler(adapter); + if (cause & SMB_F) + smb_intr_handler(adapter); + if (cause & XGMAC0_F) + xgmac_intr_handler(adapter, 0); + if (cause & XGMAC1_F) + xgmac_intr_handler(adapter, 1); + if (cause & XGMAC_KR0_F) + xgmac_intr_handler(adapter, 2); + if (cause & XGMAC_KR1_F) + xgmac_intr_handler(adapter, 3); + if (cause & PCIE_F) + pcie_intr_handler(adapter); + if (cause & MC_F) + mem_intr_handler(adapter, MEM_MC); + if (!is_t4(adapter->params.chip) && (cause & MC1_S)) + mem_intr_handler(adapter, MEM_MC1); + if (cause & EDC0_F) + mem_intr_handler(adapter, MEM_EDC0); + if (cause & EDC1_F) + mem_intr_handler(adapter, MEM_EDC1); + if (cause & LE_F) + le_intr_handler(adapter); + if (cause & TP_F) + tp_intr_handler(adapter); + if (cause & MA_F) + ma_intr_handler(adapter); + if (cause & PM_TX_F) + pmtx_intr_handler(adapter); + if (cause & PM_RX_F) + pmrx_intr_handler(adapter); + if (cause & ULP_RX_F) + ulprx_intr_handler(adapter); + if (cause & CPL_SWITCH_F) + cplsw_intr_handler(adapter); + if (cause & SGE_F) + sge_intr_handler(adapter); + if (cause & ULP_TX_F) + ulptx_intr_handler(adapter); + + /* Clear the interrupts just processed for which we are the master. */ + t4_write_reg(adapter, PL_INT_CAUSE_A, cause & GLBL_INTR_MASK); + (void)t4_read_reg(adapter, PL_INT_CAUSE_A); /* flush */ + return 1; +} + +/** + * t4_intr_enable - enable interrupts + * @adapter: the adapter whose interrupts should be enabled + * + * Enable PF-specific interrupts for the calling function and the top-level + * interrupt concentrator for global interrupts. Interrupts are already + * enabled at each module, here we just enable the roots of the interrupt + * hierarchies. + * + * Note: this function should be called only when the driver manages + * non PF-specific interrupts from the various HW modules. Only one PCI + * function at a time should be doing this. + */ +void t4_intr_enable(struct adapter *adapter) +{ + u32 pf = SOURCEPF_G(t4_read_reg(adapter, PL_WHOAMI_A)); + + t4_write_reg(adapter, SGE_INT_ENABLE3_A, ERR_CPL_EXCEED_IQE_SIZE_F | + ERR_INVALID_CIDX_INC_F | ERR_CPL_OPCODE_0_F | + ERR_DROPPED_DB_F | ERR_DATA_CPL_ON_HIGH_QID1_F | + ERR_DATA_CPL_ON_HIGH_QID0_F | ERR_BAD_DB_PIDX3_F | + ERR_BAD_DB_PIDX2_F | ERR_BAD_DB_PIDX1_F | + ERR_BAD_DB_PIDX0_F | ERR_ING_CTXT_PRIO_F | + ERR_EGR_CTXT_PRIO_F | INGRESS_SIZE_ERR_F | + DBFIFO_HP_INT_F | DBFIFO_LP_INT_F | + EGRESS_SIZE_ERR_F); + t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), PF_INTR_MASK); + t4_set_reg_field(adapter, PL_INT_MAP0_A, 0, 1 << pf); +} + +/** + * t4_intr_disable - disable interrupts + * @adapter: the adapter whose interrupts should be disabled + * + * Disable interrupts. We only disable the top-level interrupt + * concentrators. The caller must be a PCI function managing global + * interrupts. + */ +void t4_intr_disable(struct adapter *adapter) +{ + u32 pf = SOURCEPF_G(t4_read_reg(adapter, PL_WHOAMI_A)); + + t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), 0); + t4_set_reg_field(adapter, PL_INT_MAP0_A, 1 << pf, 0); +} + +/** + * hash_mac_addr - return the hash value of a MAC address + * @addr: the 48-bit Ethernet MAC address + * + * Hashes a MAC address according to the hash function used by HW inexact + * (hash) address matching. + */ +static int hash_mac_addr(const u8 *addr) +{ + u32 a = ((u32)addr[0] << 16) | ((u32)addr[1] << 8) | addr[2]; + u32 b = ((u32)addr[3] << 16) | ((u32)addr[4] << 8) | addr[5]; + a ^= b; + a ^= (a >> 12); + a ^= (a >> 6); + return a & 0x3f; +} + +/** + * t4_config_rss_range - configure a portion of the RSS mapping table + * @adapter: the adapter + * @mbox: mbox to use for the FW command + * @viid: virtual interface whose RSS subtable is to be written + * @start: start entry in the table to write + * @n: how many table entries to write + * @rspq: values for the response queue lookup table + * @nrspq: number of values in @rspq + * + * Programs the selected part of the VI's RSS mapping table with the + * provided values. If @nrspq < @n the supplied values are used repeatedly + * until the full table range is populated. + * + * The caller must ensure the values in @rspq are in the range allowed for + * @viid. + */ +int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid, + int start, int n, const u16 *rspq, unsigned int nrspq) +{ + int ret; + const u16 *rsp = rspq; + const u16 *rsp_end = rspq + nrspq; + struct fw_rss_ind_tbl_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = htonl(FW_CMD_OP_V(FW_RSS_IND_TBL_CMD) | + FW_CMD_REQUEST_F | FW_CMD_WRITE_F | + FW_RSS_IND_TBL_CMD_VIID_V(viid)); + cmd.retval_len16 = htonl(FW_LEN16(cmd)); + + /* each fw_rss_ind_tbl_cmd takes up to 32 entries */ + while (n > 0) { + int nq = min(n, 32); + __be32 *qp = &cmd.iq0_to_iq2; + + cmd.niqid = htons(nq); + cmd.startidx = htons(start); + + start += nq; + n -= nq; + + while (nq > 0) { + unsigned int v; + + v = FW_RSS_IND_TBL_CMD_IQ0_V(*rsp); + if (++rsp >= rsp_end) + rsp = rspq; + v |= FW_RSS_IND_TBL_CMD_IQ1_V(*rsp); + if (++rsp >= rsp_end) + rsp = rspq; + v |= FW_RSS_IND_TBL_CMD_IQ2_V(*rsp); + if (++rsp >= rsp_end) + rsp = rspq; + + *qp++ = htonl(v); + nq -= 3; + } + + ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL); + if (ret) + return ret; + } + return 0; +} + +/** + * t4_config_glbl_rss - configure the global RSS mode + * @adapter: the adapter + * @mbox: mbox to use for the FW command + * @mode: global RSS mode + * @flags: mode-specific flags + * + * Sets the global RSS mode. + */ +int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode, + unsigned int flags) +{ + struct fw_rss_glb_config_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_write = htonl(FW_CMD_OP_V(FW_RSS_GLB_CONFIG_CMD) | + FW_CMD_REQUEST_F | FW_CMD_WRITE_F); + c.retval_len16 = htonl(FW_LEN16(c)); + if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) { + c.u.manual.mode_pkd = htonl(FW_RSS_GLB_CONFIG_CMD_MODE_V(mode)); + } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) { + c.u.basicvirtual.mode_pkd = + htonl(FW_RSS_GLB_CONFIG_CMD_MODE_V(mode)); + c.u.basicvirtual.synmapen_to_hashtoeplitz = htonl(flags); + } else + return -EINVAL; + return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL); +} + +/* Read an RSS table row */ +static int rd_rss_row(struct adapter *adap, int row, u32 *val) +{ + t4_write_reg(adap, TP_RSS_LKP_TABLE_A, 0xfff00000 | row); + return t4_wait_op_done_val(adap, TP_RSS_LKP_TABLE_A, LKPTBLROWVLD_F, 1, + 5, 0, val); +} + +/** + * t4_read_rss - read the contents of the RSS mapping table + * @adapter: the adapter + * @map: holds the contents of the RSS mapping table + * + * Reads the contents of the RSS hash->queue mapping table. + */ +int t4_read_rss(struct adapter *adapter, u16 *map) +{ + u32 val; + int i, ret; + + for (i = 0; i < RSS_NENTRIES / 2; ++i) { + ret = rd_rss_row(adapter, i, &val); + if (ret) + return ret; + *map++ = LKPTBLQUEUE0_G(val); + *map++ = LKPTBLQUEUE1_G(val); + } + return 0; +} + +/** + * t4_read_rss_key - read the global RSS key + * @adap: the adapter + * @key: 10-entry array holding the 320-bit RSS key + * + * Reads the global 320-bit RSS key. + */ +void t4_read_rss_key(struct adapter *adap, u32 *key) +{ + t4_read_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, key, 10, + TP_RSS_SECRET_KEY0_A); +} + +/** + * t4_write_rss_key - program one of the RSS keys + * @adap: the adapter + * @key: 10-entry array holding the 320-bit RSS key + * @idx: which RSS key to write + * + * Writes one of the RSS keys with the given 320-bit value. If @idx is + * 0..15 the corresponding entry in the RSS key table is written, + * otherwise the global RSS key is written. + */ +void t4_write_rss_key(struct adapter *adap, const u32 *key, int idx) +{ + t4_write_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, key, 10, + TP_RSS_SECRET_KEY0_A); + if (idx >= 0 && idx < 16) + t4_write_reg(adap, TP_RSS_CONFIG_VRT_A, + KEYWRADDR_V(idx) | KEYWREN_F); +} + +/** + * t4_read_rss_pf_config - read PF RSS Configuration Table + * @adapter: the adapter + * @index: the entry in the PF RSS table to read + * @valp: where to store the returned value + * + * Reads the PF RSS Configuration Table at the specified index and returns + * the value found there. + */ +void t4_read_rss_pf_config(struct adapter *adapter, unsigned int index, + u32 *valp) +{ + t4_read_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, + valp, 1, TP_RSS_PF0_CONFIG_A + index); +} + +/** + * t4_read_rss_vf_config - read VF RSS Configuration Table + * @adapter: the adapter + * @index: the entry in the VF RSS table to read + * @vfl: where to store the returned VFL + * @vfh: where to store the returned VFH + * + * Reads the VF RSS Configuration Table at the specified index and returns + * the (VFL, VFH) values found there. + */ +void t4_read_rss_vf_config(struct adapter *adapter, unsigned int index, + u32 *vfl, u32 *vfh) +{ + u32 vrt, mask, data; + + mask = VFWRADDR_V(VFWRADDR_M); + data = VFWRADDR_V(index); + + /* Request that the index'th VF Table values be read into VFL/VFH. + */ + vrt = t4_read_reg(adapter, TP_RSS_CONFIG_VRT_A); + vrt &= ~(VFRDRG_F | VFWREN_F | KEYWREN_F | mask); + vrt |= data | VFRDEN_F; + t4_write_reg(adapter, TP_RSS_CONFIG_VRT_A, vrt); + + /* Grab the VFL/VFH values ... + */ + t4_read_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, + vfl, 1, TP_RSS_VFL_CONFIG_A); + t4_read_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, + vfh, 1, TP_RSS_VFH_CONFIG_A); +} + +/** + * t4_read_rss_pf_map - read PF RSS Map + * @adapter: the adapter + * + * Reads the PF RSS Map register and returns its value. + */ +u32 t4_read_rss_pf_map(struct adapter *adapter) +{ + u32 pfmap; + + t4_read_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, + &pfmap, 1, TP_RSS_PF_MAP_A); + return pfmap; +} + +/** + * t4_read_rss_pf_mask - read PF RSS Mask + * @adapter: the adapter + * + * Reads the PF RSS Mask register and returns its value. + */ +u32 t4_read_rss_pf_mask(struct adapter *adapter) +{ + u32 pfmask; + + t4_read_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, + &pfmask, 1, TP_RSS_PF_MSK_A); + return pfmask; +} + +/** + * t4_tp_get_tcp_stats - read TP's TCP MIB counters + * @adap: the adapter + * @v4: holds the TCP/IP counter values + * @v6: holds the TCP/IPv6 counter values + * + * Returns the values of TP's TCP/IP and TCP/IPv6 MIB counters. + * Either @v4 or @v6 may be %NULL to skip the corresponding stats. + */ +void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4, + struct tp_tcp_stats *v6) +{ + u32 val[TP_MIB_TCP_RXT_SEG_LO_A - TP_MIB_TCP_OUT_RST_A + 1]; + +#define STAT_IDX(x) ((TP_MIB_TCP_##x##_A) - TP_MIB_TCP_OUT_RST_A) +#define STAT(x) val[STAT_IDX(x)] +#define STAT64(x) (((u64)STAT(x##_HI) << 32) | STAT(x##_LO)) + + if (v4) { + t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, val, + ARRAY_SIZE(val), TP_MIB_TCP_OUT_RST_A); + v4->tcpOutRsts = STAT(OUT_RST); + v4->tcpInSegs = STAT64(IN_SEG); + v4->tcpOutSegs = STAT64(OUT_SEG); + v4->tcpRetransSegs = STAT64(RXT_SEG); + } + if (v6) { + t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, val, + ARRAY_SIZE(val), TP_MIB_TCP_V6OUT_RST_A); + v6->tcpOutRsts = STAT(OUT_RST); + v6->tcpInSegs = STAT64(IN_SEG); + v6->tcpOutSegs = STAT64(OUT_SEG); + v6->tcpRetransSegs = STAT64(RXT_SEG); + } +#undef STAT64 +#undef STAT +#undef STAT_IDX +} + +/** + * t4_read_mtu_tbl - returns the values in the HW path MTU table + * @adap: the adapter + * @mtus: where to store the MTU values + * @mtu_log: where to store the MTU base-2 log (may be %NULL) + * + * Reads the HW path MTU table. + */ +void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log) +{ + u32 v; + int i; + + for (i = 0; i < NMTUS; ++i) { + t4_write_reg(adap, TP_MTU_TABLE_A, + MTUINDEX_V(0xff) | MTUVALUE_V(i)); + v = t4_read_reg(adap, TP_MTU_TABLE_A); + mtus[i] = MTUVALUE_G(v); + if (mtu_log) + mtu_log[i] = MTUWIDTH_G(v); + } +} + +/** + * t4_read_cong_tbl - reads the congestion control table + * @adap: the adapter + * @incr: where to store the alpha values + * + * Reads the additive increments programmed into the HW congestion + * control table. + */ +void t4_read_cong_tbl(struct adapter *adap, u16 incr[NMTUS][NCCTRL_WIN]) +{ + unsigned int mtu, w; + + for (mtu = 0; mtu < NMTUS; ++mtu) + for (w = 0; w < NCCTRL_WIN; ++w) { + t4_write_reg(adap, TP_CCTRL_TABLE_A, + ROWINDEX_V(0xffff) | (mtu << 5) | w); + incr[mtu][w] = (u16)t4_read_reg(adap, + TP_CCTRL_TABLE_A) & 0x1fff; + } +} + +/** + * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register + * @adap: the adapter + * @addr: the indirect TP register address + * @mask: specifies the field within the register to modify + * @val: new value for the field + * + * Sets a field of an indirect TP register to the given value. + */ +void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr, + unsigned int mask, unsigned int val) +{ + t4_write_reg(adap, TP_PIO_ADDR_A, addr); + val |= t4_read_reg(adap, TP_PIO_DATA_A) & ~mask; + t4_write_reg(adap, TP_PIO_DATA_A, val); +} + +/** + * init_cong_ctrl - initialize congestion control parameters + * @a: the alpha values for congestion control + * @b: the beta values for congestion control + * + * Initialize the congestion control parameters. + */ +static void init_cong_ctrl(unsigned short *a, unsigned short *b) +{ + a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1; + a[9] = 2; + a[10] = 3; + a[11] = 4; + a[12] = 5; + a[13] = 6; + a[14] = 7; + a[15] = 8; + a[16] = 9; + a[17] = 10; + a[18] = 14; + a[19] = 17; + a[20] = 21; + a[21] = 25; + a[22] = 30; + a[23] = 35; + a[24] = 45; + a[25] = 60; + a[26] = 80; + a[27] = 100; + a[28] = 200; + a[29] = 300; + a[30] = 400; + a[31] = 500; + + b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0; + b[9] = b[10] = 1; + b[11] = b[12] = 2; + b[13] = b[14] = b[15] = b[16] = 3; + b[17] = b[18] = b[19] = b[20] = b[21] = 4; + b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5; + b[28] = b[29] = 6; + b[30] = b[31] = 7; +} + +/* The minimum additive increment value for the congestion control table */ +#define CC_MIN_INCR 2U + +/** + * t4_load_mtus - write the MTU and congestion control HW tables + * @adap: the adapter + * @mtus: the values for the MTU table + * @alpha: the values for the congestion control alpha parameter + * @beta: the values for the congestion control beta parameter + * + * Write the HW MTU table with the supplied MTUs and the high-speed + * congestion control table with the supplied alpha, beta, and MTUs. + * We write the two tables together because the additive increments + * depend on the MTUs. + */ +void t4_load_mtus(struct adapter *adap, const unsigned short *mtus, + const unsigned short *alpha, const unsigned short *beta) +{ + static const unsigned int avg_pkts[NCCTRL_WIN] = { + 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640, + 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480, + 28672, 40960, 57344, 81920, 114688, 163840, 229376 + }; + + unsigned int i, w; + + for (i = 0; i < NMTUS; ++i) { + unsigned int mtu = mtus[i]; + unsigned int log2 = fls(mtu); + + if (!(mtu & ((1 << log2) >> 2))) /* round */ + log2--; + t4_write_reg(adap, TP_MTU_TABLE_A, MTUINDEX_V(i) | + MTUWIDTH_V(log2) | MTUVALUE_V(mtu)); + + for (w = 0; w < NCCTRL_WIN; ++w) { + unsigned int inc; + + inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w], + CC_MIN_INCR); + + t4_write_reg(adap, TP_CCTRL_TABLE_A, (i << 21) | + (w << 16) | (beta[w] << 13) | inc); + } + } +} + +/** + * t4_pmtx_get_stats - returns the HW stats from PMTX + * @adap: the adapter + * @cnt: where to store the count statistics + * @cycles: where to store the cycle statistics + * + * Returns performance statistics from PMTX. + */ +void t4_pmtx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[]) +{ + int i; + u32 data[2]; + + for (i = 0; i < PM_NSTATS; i++) { + t4_write_reg(adap, PM_TX_STAT_CONFIG_A, i + 1); + cnt[i] = t4_read_reg(adap, PM_TX_STAT_COUNT_A); + if (is_t4(adap->params.chip)) { + cycles[i] = t4_read_reg64(adap, PM_TX_STAT_LSB_A); + } else { + t4_read_indirect(adap, PM_TX_DBG_CTRL_A, + PM_TX_DBG_DATA_A, data, 2, + PM_TX_DBG_STAT_MSB_A); + cycles[i] = (((u64)data[0] << 32) | data[1]); + } + } +} + +/** + * t4_pmrx_get_stats - returns the HW stats from PMRX + * @adap: the adapter + * @cnt: where to store the count statistics + * @cycles: where to store the cycle statistics + * + * Returns performance statistics from PMRX. + */ +void t4_pmrx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[]) +{ + int i; + u32 data[2]; + + for (i = 0; i < PM_NSTATS; i++) { + t4_write_reg(adap, PM_RX_STAT_CONFIG_A, i + 1); + cnt[i] = t4_read_reg(adap, PM_RX_STAT_COUNT_A); + if (is_t4(adap->params.chip)) { + cycles[i] = t4_read_reg64(adap, PM_RX_STAT_LSB_A); + } else { + t4_read_indirect(adap, PM_RX_DBG_CTRL_A, + PM_RX_DBG_DATA_A, data, 2, + PM_RX_DBG_STAT_MSB_A); + cycles[i] = (((u64)data[0] << 32) | data[1]); + } + } +} + +/** + * get_mps_bg_map - return the buffer groups associated with a port + * @adap: the adapter + * @idx: the port index + * + * Returns a bitmap indicating which MPS buffer groups are associated + * with the given port. Bit i is set if buffer group i is used by the + * port. + */ +static unsigned int get_mps_bg_map(struct adapter *adap, int idx) +{ + u32 n = NUMPORTS_G(t4_read_reg(adap, MPS_CMN_CTL_A)); + + if (n == 0) + return idx == 0 ? 0xf : 0; + if (n == 1) + return idx < 2 ? (3 << (2 * idx)) : 0; + return 1 << idx; +} + +/** + * t4_get_port_type_description - return Port Type string description + * @port_type: firmware Port Type enumeration + */ +const char *t4_get_port_type_description(enum fw_port_type port_type) +{ + static const char *const port_type_description[] = { + "R XFI", + "R XAUI", + "T SGMII", + "T XFI", + "T XAUI", + "KX4", + "CX4", + "KX", + "KR", + "R SFP+", + "KR/KX", + "KR/KX/KX4", + "R QSFP_10G", + "R QSA", + "R QSFP", + "R BP40_BA", + }; + + if (port_type < ARRAY_SIZE(port_type_description)) + return port_type_description[port_type]; + return "UNKNOWN"; +} + +/** + * t4_get_port_stats - collect port statistics + * @adap: the adapter + * @idx: the port index + * @p: the stats structure to fill + * + * Collect statistics related to the given port from HW. + */ +void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p) +{ + u32 bgmap = get_mps_bg_map(adap, idx); + +#define GET_STAT(name) \ + t4_read_reg64(adap, \ + (is_t4(adap->params.chip) ? PORT_REG(idx, MPS_PORT_STAT_##name##_L) : \ + T5_PORT_REG(idx, MPS_PORT_STAT_##name##_L))) +#define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L) + + p->tx_octets = GET_STAT(TX_PORT_BYTES); + p->tx_frames = GET_STAT(TX_PORT_FRAMES); + p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST); + p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST); + p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST); + p->tx_error_frames = GET_STAT(TX_PORT_ERROR); + p->tx_frames_64 = GET_STAT(TX_PORT_64B); + p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B); + p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B); + p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B); + p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B); + p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B); + p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX); + p->tx_drop = GET_STAT(TX_PORT_DROP); + p->tx_pause = GET_STAT(TX_PORT_PAUSE); + p->tx_ppp0 = GET_STAT(TX_PORT_PPP0); + p->tx_ppp1 = GET_STAT(TX_PORT_PPP1); + p->tx_ppp2 = GET_STAT(TX_PORT_PPP2); + p->tx_ppp3 = GET_STAT(TX_PORT_PPP3); + p->tx_ppp4 = GET_STAT(TX_PORT_PPP4); + p->tx_ppp5 = GET_STAT(TX_PORT_PPP5); + p->tx_ppp6 = GET_STAT(TX_PORT_PPP6); + p->tx_ppp7 = GET_STAT(TX_PORT_PPP7); + + p->rx_octets = GET_STAT(RX_PORT_BYTES); + p->rx_frames = GET_STAT(RX_PORT_FRAMES); + p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST); + p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST); + p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST); + p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR); + p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR); + p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR); + p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR); + p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR); + p->rx_runt = GET_STAT(RX_PORT_LESS_64B); + p->rx_frames_64 = GET_STAT(RX_PORT_64B); + p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B); + p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B); + p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B); + p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B); + p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B); + p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX); + p->rx_pause = GET_STAT(RX_PORT_PAUSE); + p->rx_ppp0 = GET_STAT(RX_PORT_PPP0); + p->rx_ppp1 = GET_STAT(RX_PORT_PPP1); + p->rx_ppp2 = GET_STAT(RX_PORT_PPP2); + p->rx_ppp3 = GET_STAT(RX_PORT_PPP3); + p->rx_ppp4 = GET_STAT(RX_PORT_PPP4); + p->rx_ppp5 = GET_STAT(RX_PORT_PPP5); + p->rx_ppp6 = GET_STAT(RX_PORT_PPP6); + p->rx_ppp7 = GET_STAT(RX_PORT_PPP7); + + p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0; + p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0; + p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0; + p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0; + p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0; + p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0; + p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0; + p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0; + +#undef GET_STAT +#undef GET_STAT_COM +} + +/** + * t4_wol_magic_enable - enable/disable magic packet WoL + * @adap: the adapter + * @port: the physical port index + * @addr: MAC address expected in magic packets, %NULL to disable + * + * Enables/disables magic packet wake-on-LAN for the selected port. + */ +void t4_wol_magic_enable(struct adapter *adap, unsigned int port, + const u8 *addr) +{ + u32 mag_id_reg_l, mag_id_reg_h, port_cfg_reg; + + if (is_t4(adap->params.chip)) { + mag_id_reg_l = PORT_REG(port, XGMAC_PORT_MAGIC_MACID_LO); + mag_id_reg_h = PORT_REG(port, XGMAC_PORT_MAGIC_MACID_HI); + port_cfg_reg = PORT_REG(port, XGMAC_PORT_CFG2_A); + } else { + mag_id_reg_l = T5_PORT_REG(port, MAC_PORT_MAGIC_MACID_LO); + mag_id_reg_h = T5_PORT_REG(port, MAC_PORT_MAGIC_MACID_HI); + port_cfg_reg = T5_PORT_REG(port, MAC_PORT_CFG2_A); + } + + if (addr) { + t4_write_reg(adap, mag_id_reg_l, + (addr[2] << 24) | (addr[3] << 16) | + (addr[4] << 8) | addr[5]); + t4_write_reg(adap, mag_id_reg_h, + (addr[0] << 8) | addr[1]); + } + t4_set_reg_field(adap, port_cfg_reg, MAGICEN_F, + addr ? MAGICEN_F : 0); +} + +/** + * t4_wol_pat_enable - enable/disable pattern-based WoL + * @adap: the adapter + * @port: the physical port index + * @map: bitmap of which HW pattern filters to set + * @mask0: byte mask for bytes 0-63 of a packet + * @mask1: byte mask for bytes 64-127 of a packet + * @crc: Ethernet CRC for selected bytes + * @enable: enable/disable switch + * + * Sets the pattern filters indicated in @map to mask out the bytes + * specified in @mask0/@mask1 in received packets and compare the CRC of + * the resulting packet against @crc. If @enable is %true pattern-based + * WoL is enabled, otherwise disabled. + */ +int t4_wol_pat_enable(struct adapter *adap, unsigned int port, unsigned int map, + u64 mask0, u64 mask1, unsigned int crc, bool enable) +{ + int i; + u32 port_cfg_reg; + + if (is_t4(adap->params.chip)) + port_cfg_reg = PORT_REG(port, XGMAC_PORT_CFG2_A); + else + port_cfg_reg = T5_PORT_REG(port, MAC_PORT_CFG2_A); + + if (!enable) { + t4_set_reg_field(adap, port_cfg_reg, PATEN_F, 0); + return 0; + } + if (map > 0xff) + return -EINVAL; + +#define EPIO_REG(name) \ + (is_t4(adap->params.chip) ? \ + PORT_REG(port, XGMAC_PORT_EPIO_##name##_A) : \ + T5_PORT_REG(port, MAC_PORT_EPIO_##name##_A)) + + t4_write_reg(adap, EPIO_REG(DATA1), mask0 >> 32); + t4_write_reg(adap, EPIO_REG(DATA2), mask1); + t4_write_reg(adap, EPIO_REG(DATA3), mask1 >> 32); + + for (i = 0; i < NWOL_PAT; i++, map >>= 1) { + if (!(map & 1)) + continue; + + /* write byte masks */ + t4_write_reg(adap, EPIO_REG(DATA0), mask0); + t4_write_reg(adap, EPIO_REG(OP), ADDRESS_V(i) | EPIOWR_F); + t4_read_reg(adap, EPIO_REG(OP)); /* flush */ + if (t4_read_reg(adap, EPIO_REG(OP)) & SF_BUSY_F) + return -ETIMEDOUT; + + /* write CRC */ + t4_write_reg(adap, EPIO_REG(DATA0), crc); + t4_write_reg(adap, EPIO_REG(OP), ADDRESS_V(i + 32) | EPIOWR_F); + t4_read_reg(adap, EPIO_REG(OP)); /* flush */ + if (t4_read_reg(adap, EPIO_REG(OP)) & SF_BUSY_F) + return -ETIMEDOUT; + } +#undef EPIO_REG + + t4_set_reg_field(adap, PORT_REG(port, XGMAC_PORT_CFG2_A), 0, PATEN_F); + return 0; +} + +/* t4_mk_filtdelwr - create a delete filter WR + * @ftid: the filter ID + * @wr: the filter work request to populate + * @qid: ingress queue to receive the delete notification + * + * Creates a filter work request to delete the supplied filter. If @qid is + * negative the delete notification is suppressed. + */ +void t4_mk_filtdelwr(unsigned int ftid, struct fw_filter_wr *wr, int qid) +{ + memset(wr, 0, sizeof(*wr)); + wr->op_pkd = htonl(FW_WR_OP_V(FW_FILTER_WR)); + wr->len16_pkd = htonl(FW_WR_LEN16_V(sizeof(*wr) / 16)); + wr->tid_to_iq = htonl(FW_FILTER_WR_TID_V(ftid) | + FW_FILTER_WR_NOREPLY_V(qid < 0)); + wr->del_filter_to_l2tix = htonl(FW_FILTER_WR_DEL_FILTER_F); + if (qid >= 0) + wr->rx_chan_rx_rpl_iq = htons(FW_FILTER_WR_RX_RPL_IQ_V(qid)); +} + +#define INIT_CMD(var, cmd, rd_wr) do { \ + (var).op_to_write = htonl(FW_CMD_OP_V(FW_##cmd##_CMD) | \ + FW_CMD_REQUEST_F | FW_CMD_##rd_wr##_F); \ + (var).retval_len16 = htonl(FW_LEN16(var)); \ +} while (0) + +int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox, + u32 addr, u32 val) +{ + struct fw_ldst_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_addrspace = htonl(FW_CMD_OP_V(FW_LDST_CMD) | FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | + FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FIRMWARE)); + c.cycles_to_len16 = htonl(FW_LEN16(c)); + c.u.addrval.addr = htonl(addr); + c.u.addrval.val = htonl(val); + + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_mdio_rd - read a PHY register through MDIO + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @phy_addr: the PHY address + * @mmd: the PHY MMD to access (0 for clause 22 PHYs) + * @reg: the register to read + * @valp: where to store the value + * + * Issues a FW command through the given mailbox to read a PHY register. + */ +int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, + unsigned int mmd, unsigned int reg, u16 *valp) +{ + int ret; + struct fw_ldst_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_addrspace = htonl(FW_CMD_OP_V(FW_LDST_CMD) | FW_CMD_REQUEST_F | + FW_CMD_READ_F | FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_MDIO)); + c.cycles_to_len16 = htonl(FW_LEN16(c)); + c.u.mdio.paddr_mmd = htons(FW_LDST_CMD_PADDR_V(phy_addr) | + FW_LDST_CMD_MMD_V(mmd)); + c.u.mdio.raddr = htons(reg); + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret == 0) + *valp = ntohs(c.u.mdio.rval); + return ret; +} + +/** + * t4_mdio_wr - write a PHY register through MDIO + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @phy_addr: the PHY address + * @mmd: the PHY MMD to access (0 for clause 22 PHYs) + * @reg: the register to write + * @valp: value to write + * + * Issues a FW command through the given mailbox to write a PHY register. + */ +int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, + unsigned int mmd, unsigned int reg, u16 val) +{ + struct fw_ldst_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_addrspace = htonl(FW_CMD_OP_V(FW_LDST_CMD) | FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_MDIO)); + c.cycles_to_len16 = htonl(FW_LEN16(c)); + c.u.mdio.paddr_mmd = htons(FW_LDST_CMD_PADDR_V(phy_addr) | + FW_LDST_CMD_MMD_V(mmd)); + c.u.mdio.raddr = htons(reg); + c.u.mdio.rval = htons(val); + + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_sge_decode_idma_state - decode the idma state + * @adap: the adapter + * @state: the state idma is stuck in + */ +void t4_sge_decode_idma_state(struct adapter *adapter, int state) +{ + static const char * const t4_decode[] = { + "IDMA_IDLE", + "IDMA_PUSH_MORE_CPL_FIFO", + "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO", + "Not used", + "IDMA_PHYSADDR_SEND_PCIEHDR", + "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST", + "IDMA_PHYSADDR_SEND_PAYLOAD", + "IDMA_SEND_FIFO_TO_IMSG", + "IDMA_FL_REQ_DATA_FL_PREP", + "IDMA_FL_REQ_DATA_FL", + "IDMA_FL_DROP", + "IDMA_FL_H_REQ_HEADER_FL", + "IDMA_FL_H_SEND_PCIEHDR", + "IDMA_FL_H_PUSH_CPL_FIFO", + "IDMA_FL_H_SEND_CPL", + "IDMA_FL_H_SEND_IP_HDR_FIRST", + "IDMA_FL_H_SEND_IP_HDR", + "IDMA_FL_H_REQ_NEXT_HEADER_FL", + "IDMA_FL_H_SEND_NEXT_PCIEHDR", + "IDMA_FL_H_SEND_IP_HDR_PADDING", + "IDMA_FL_D_SEND_PCIEHDR", + "IDMA_FL_D_SEND_CPL_AND_IP_HDR", + "IDMA_FL_D_REQ_NEXT_DATA_FL", + "IDMA_FL_SEND_PCIEHDR", + "IDMA_FL_PUSH_CPL_FIFO", + "IDMA_FL_SEND_CPL", + "IDMA_FL_SEND_PAYLOAD_FIRST", + "IDMA_FL_SEND_PAYLOAD", + "IDMA_FL_REQ_NEXT_DATA_FL", + "IDMA_FL_SEND_NEXT_PCIEHDR", + "IDMA_FL_SEND_PADDING", + "IDMA_FL_SEND_COMPLETION_TO_IMSG", + "IDMA_FL_SEND_FIFO_TO_IMSG", + "IDMA_FL_REQ_DATAFL_DONE", + "IDMA_FL_REQ_HEADERFL_DONE", + }; + static const char * const t5_decode[] = { + "IDMA_IDLE", + "IDMA_ALMOST_IDLE", + "IDMA_PUSH_MORE_CPL_FIFO", + "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO", + "IDMA_SGEFLRFLUSH_SEND_PCIEHDR", + "IDMA_PHYSADDR_SEND_PCIEHDR", + "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST", + "IDMA_PHYSADDR_SEND_PAYLOAD", + "IDMA_SEND_FIFO_TO_IMSG", + "IDMA_FL_REQ_DATA_FL", + "IDMA_FL_DROP", + "IDMA_FL_DROP_SEND_INC", + "IDMA_FL_H_REQ_HEADER_FL", + "IDMA_FL_H_SEND_PCIEHDR", + "IDMA_FL_H_PUSH_CPL_FIFO", + "IDMA_FL_H_SEND_CPL", + "IDMA_FL_H_SEND_IP_HDR_FIRST", + "IDMA_FL_H_SEND_IP_HDR", + "IDMA_FL_H_REQ_NEXT_HEADER_FL", + "IDMA_FL_H_SEND_NEXT_PCIEHDR", + "IDMA_FL_H_SEND_IP_HDR_PADDING", + "IDMA_FL_D_SEND_PCIEHDR", + "IDMA_FL_D_SEND_CPL_AND_IP_HDR", + "IDMA_FL_D_REQ_NEXT_DATA_FL", + "IDMA_FL_SEND_PCIEHDR", + "IDMA_FL_PUSH_CPL_FIFO", + "IDMA_FL_SEND_CPL", + "IDMA_FL_SEND_PAYLOAD_FIRST", + "IDMA_FL_SEND_PAYLOAD", + "IDMA_FL_REQ_NEXT_DATA_FL", + "IDMA_FL_SEND_NEXT_PCIEHDR", + "IDMA_FL_SEND_PADDING", + "IDMA_FL_SEND_COMPLETION_TO_IMSG", + }; + static const u32 sge_regs[] = { + SGE_DEBUG_DATA_LOW_INDEX_2_A, + SGE_DEBUG_DATA_LOW_INDEX_3_A, + SGE_DEBUG_DATA_HIGH_INDEX_10_A, + }; + const char **sge_idma_decode; + int sge_idma_decode_nstates; + int i; + + if (is_t4(adapter->params.chip)) { + sge_idma_decode = (const char **)t4_decode; + sge_idma_decode_nstates = ARRAY_SIZE(t4_decode); + } else { + sge_idma_decode = (const char **)t5_decode; + sge_idma_decode_nstates = ARRAY_SIZE(t5_decode); + } + + if (state < sge_idma_decode_nstates) + CH_WARN(adapter, "idma state %s\n", sge_idma_decode[state]); + else + CH_WARN(adapter, "idma state %d unknown\n", state); + + for (i = 0; i < ARRAY_SIZE(sge_regs); i++) + CH_WARN(adapter, "SGE register %#x value %#x\n", + sge_regs[i], t4_read_reg(adapter, sge_regs[i])); +} + +/** + * t4_fw_hello - establish communication with FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @evt_mbox: mailbox to receive async FW events + * @master: specifies the caller's willingness to be the device master + * @state: returns the current device state (if non-NULL) + * + * Issues a command to establish communication with FW. Returns either + * an error (negative integer) or the mailbox of the Master PF. + */ +int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, + enum dev_master master, enum dev_state *state) +{ + int ret; + struct fw_hello_cmd c; + u32 v; + unsigned int master_mbox; + int retries = FW_CMD_HELLO_RETRIES; + +retry: + memset(&c, 0, sizeof(c)); + INIT_CMD(c, HELLO, WRITE); + c.err_to_clearinit = htonl( + FW_HELLO_CMD_MASTERDIS_V(master == MASTER_CANT) | + FW_HELLO_CMD_MASTERFORCE_V(master == MASTER_MUST) | + FW_HELLO_CMD_MBMASTER_V(master == MASTER_MUST ? mbox : + FW_HELLO_CMD_MBMASTER_M) | + FW_HELLO_CMD_MBASYNCNOT_V(evt_mbox) | + FW_HELLO_CMD_STAGE_V(fw_hello_cmd_stage_os) | + FW_HELLO_CMD_CLEARINIT_F); + + /* + * Issue the HELLO command to the firmware. If it's not successful + * but indicates that we got a "busy" or "timeout" condition, retry + * the HELLO until we exhaust our retry limit. If we do exceed our + * retry limit, check to see if the firmware left us any error + * information and report that if so. + */ + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret < 0) { + if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0) + goto retry; + if (t4_read_reg(adap, PCIE_FW_A) & PCIE_FW_ERR_F) + t4_report_fw_error(adap); + return ret; + } + + v = ntohl(c.err_to_clearinit); + master_mbox = FW_HELLO_CMD_MBMASTER_G(v); + if (state) { + if (v & FW_HELLO_CMD_ERR_F) + *state = DEV_STATE_ERR; + else if (v & FW_HELLO_CMD_INIT_F) + *state = DEV_STATE_INIT; + else + *state = DEV_STATE_UNINIT; + } + + /* + * If we're not the Master PF then we need to wait around for the + * Master PF Driver to finish setting up the adapter. + * + * Note that we also do this wait if we're a non-Master-capable PF and + * there is no current Master PF; a Master PF may show up momentarily + * and we wouldn't want to fail pointlessly. (This can happen when an + * OS loads lots of different drivers rapidly at the same time). In + * this case, the Master PF returned by the firmware will be + * PCIE_FW_MASTER_M so the test below will work ... + */ + if ((v & (FW_HELLO_CMD_ERR_F|FW_HELLO_CMD_INIT_F)) == 0 && + master_mbox != mbox) { + int waiting = FW_CMD_HELLO_TIMEOUT; + + /* + * Wait for the firmware to either indicate an error or + * initialized state. If we see either of these we bail out + * and report the issue to the caller. If we exhaust the + * "hello timeout" and we haven't exhausted our retries, try + * again. Otherwise bail with a timeout error. + */ + for (;;) { + u32 pcie_fw; + + msleep(50); + waiting -= 50; + + /* + * If neither Error nor Initialialized are indicated + * by the firmware keep waiting till we exaust our + * timeout ... and then retry if we haven't exhausted + * our retries ... + */ + pcie_fw = t4_read_reg(adap, PCIE_FW_A); + if (!(pcie_fw & (PCIE_FW_ERR_F|PCIE_FW_INIT_F))) { + if (waiting <= 0) { + if (retries-- > 0) + goto retry; + + return -ETIMEDOUT; + } + continue; + } + + /* + * We either have an Error or Initialized condition + * report errors preferentially. + */ + if (state) { + if (pcie_fw & PCIE_FW_ERR_F) + *state = DEV_STATE_ERR; + else if (pcie_fw & PCIE_FW_INIT_F) + *state = DEV_STATE_INIT; + } + + /* + * If we arrived before a Master PF was selected and + * there's not a valid Master PF, grab its identity + * for our caller. + */ + if (master_mbox == PCIE_FW_MASTER_M && + (pcie_fw & PCIE_FW_MASTER_VLD_F)) + master_mbox = PCIE_FW_MASTER_G(pcie_fw); + break; + } + } + + return master_mbox; +} + +/** + * t4_fw_bye - end communication with FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * + * Issues a command to terminate communication with FW. + */ +int t4_fw_bye(struct adapter *adap, unsigned int mbox) +{ + struct fw_bye_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, BYE, WRITE); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_init_cmd - ask FW to initialize the device + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * + * Issues a command to FW to partially initialize the device. This + * performs initialization that generally doesn't depend on user input. + */ +int t4_early_init(struct adapter *adap, unsigned int mbox) +{ + struct fw_initialize_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, INITIALIZE, WRITE); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_fw_reset - issue a reset to FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @reset: specifies the type of reset to perform + * + * Issues a reset command of the specified type to FW. + */ +int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) +{ + struct fw_reset_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, RESET, WRITE); + c.val = htonl(reset); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_fw_halt - issue a reset/halt to FW and put uP into RESET + * @adap: the adapter + * @mbox: mailbox to use for the FW RESET command (if desired) + * @force: force uP into RESET even if FW RESET command fails + * + * Issues a RESET command to firmware (if desired) with a HALT indication + * and then puts the microprocessor into RESET state. The RESET command + * will only be issued if a legitimate mailbox is provided (mbox <= + * PCIE_FW_MASTER_M). + * + * This is generally used in order for the host to safely manipulate the + * adapter without fear of conflicting with whatever the firmware might + * be doing. The only way out of this state is to RESTART the firmware + * ... + */ +static int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force) +{ + int ret = 0; + + /* + * If a legitimate mailbox is provided, issue a RESET command + * with a HALT indication. + */ + if (mbox <= PCIE_FW_MASTER_M) { + struct fw_reset_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, RESET, WRITE); + c.val = htonl(PIORST_F | PIORSTMODE_F); + c.halt_pkd = htonl(FW_RESET_CMD_HALT_F); + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + } + + /* + * Normally we won't complete the operation if the firmware RESET + * command fails but if our caller insists we'll go ahead and put the + * uP into RESET. This can be useful if the firmware is hung or even + * missing ... We'll have to take the risk of putting the uP into + * RESET without the cooperation of firmware in that case. + * + * We also force the firmware's HALT flag to be on in case we bypassed + * the firmware RESET command above or we're dealing with old firmware + * which doesn't have the HALT capability. This will serve as a flag + * for the incoming firmware to know that it's coming out of a HALT + * rather than a RESET ... if it's new enough to understand that ... + */ + if (ret == 0 || force) { + t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, UPCRST_F); + t4_set_reg_field(adap, PCIE_FW_A, PCIE_FW_HALT_F, + PCIE_FW_HALT_F); + } + + /* + * And we always return the result of the firmware RESET command + * even when we force the uP into RESET ... + */ + return ret; +} + +/** + * t4_fw_restart - restart the firmware by taking the uP out of RESET + * @adap: the adapter + * @reset: if we want to do a RESET to restart things + * + * Restart firmware previously halted by t4_fw_halt(). On successful + * return the previous PF Master remains as the new PF Master and there + * is no need to issue a new HELLO command, etc. + * + * We do this in two ways: + * + * 1. If we're dealing with newer firmware we'll simply want to take + * the chip's microprocessor out of RESET. This will cause the + * firmware to start up from its start vector. And then we'll loop + * until the firmware indicates it's started again (PCIE_FW.HALT + * reset to 0) or we timeout. + * + * 2. If we're dealing with older firmware then we'll need to RESET + * the chip since older firmware won't recognize the PCIE_FW.HALT + * flag and automatically RESET itself on startup. + */ +static int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset) +{ + if (reset) { + /* + * Since we're directing the RESET instead of the firmware + * doing it automatically, we need to clear the PCIE_FW.HALT + * bit. + */ + t4_set_reg_field(adap, PCIE_FW_A, PCIE_FW_HALT_F, 0); + + /* + * If we've been given a valid mailbox, first try to get the + * firmware to do the RESET. If that works, great and we can + * return success. Otherwise, if we haven't been given a + * valid mailbox or the RESET command failed, fall back to + * hitting the chip with a hammer. + */ + if (mbox <= PCIE_FW_MASTER_M) { + t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, 0); + msleep(100); + if (t4_fw_reset(adap, mbox, + PIORST_F | PIORSTMODE_F) == 0) + return 0; + } + + t4_write_reg(adap, PL_RST_A, PIORST_F | PIORSTMODE_F); + msleep(2000); + } else { + int ms; + + t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, 0); + for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { + if (!(t4_read_reg(adap, PCIE_FW_A) & PCIE_FW_HALT_F)) + return 0; + msleep(100); + ms += 100; + } + return -ETIMEDOUT; + } + return 0; +} + +/** + * t4_fw_upgrade - perform all of the steps necessary to upgrade FW + * @adap: the adapter + * @mbox: mailbox to use for the FW RESET command (if desired) + * @fw_data: the firmware image to write + * @size: image size + * @force: force upgrade even if firmware doesn't cooperate + * + * Perform all of the steps necessary for upgrading an adapter's + * firmware image. Normally this requires the cooperation of the + * existing firmware in order to halt all existing activities + * but if an invalid mailbox token is passed in we skip that step + * (though we'll still put the adapter microprocessor into RESET in + * that case). + * + * On successful return the new firmware will have been loaded and + * the adapter will have been fully RESET losing all previous setup + * state. On unsuccessful return the adapter may be completely hosed ... + * positive errno indicates that the adapter is ~probably~ intact, a + * negative errno indicates that things are looking bad ... + */ +int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, + const u8 *fw_data, unsigned int size, int force) +{ + const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; + int reset, ret; + + if (!t4_fw_matches_chip(adap, fw_hdr)) + return -EINVAL; + + ret = t4_fw_halt(adap, mbox, force); + if (ret < 0 && !force) + return ret; + + ret = t4_load_fw(adap, fw_data, size); + if (ret < 0) + return ret; + + /* + * Older versions of the firmware don't understand the new + * PCIE_FW.HALT flag and so won't know to perform a RESET when they + * restart. So for newly loaded older firmware we'll have to do the + * RESET for it so it starts up on a clean slate. We can tell if + * the newly loaded firmware will handle this right by checking + * its header flags to see if it advertises the capability. + */ + reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); + return t4_fw_restart(adap, mbox, reset); +} + +/** + * t4_fixup_host_params - fix up host-dependent parameters + * @adap: the adapter + * @page_size: the host's Base Page Size + * @cache_line_size: the host's Cache Line Size + * + * Various registers in T4 contain values which are dependent on the + * host's Base Page and Cache Line Sizes. This function will fix all of + * those registers with the appropriate values as passed in ... + */ +int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, + unsigned int cache_line_size) +{ + unsigned int page_shift = fls(page_size) - 1; + unsigned int sge_hps = page_shift - 10; + unsigned int stat_len = cache_line_size > 64 ? 128 : 64; + unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size; + unsigned int fl_align_log = fls(fl_align) - 1; + + t4_write_reg(adap, SGE_HOST_PAGE_SIZE_A, + HOSTPAGESIZEPF0_V(sge_hps) | + HOSTPAGESIZEPF1_V(sge_hps) | + HOSTPAGESIZEPF2_V(sge_hps) | + HOSTPAGESIZEPF3_V(sge_hps) | + HOSTPAGESIZEPF4_V(sge_hps) | + HOSTPAGESIZEPF5_V(sge_hps) | + HOSTPAGESIZEPF6_V(sge_hps) | + HOSTPAGESIZEPF7_V(sge_hps)); + + if (is_t4(adap->params.chip)) { + t4_set_reg_field(adap, SGE_CONTROL_A, + INGPADBOUNDARY_V(INGPADBOUNDARY_M) | + EGRSTATUSPAGESIZE_F, + INGPADBOUNDARY_V(fl_align_log - + INGPADBOUNDARY_SHIFT_X) | + EGRSTATUSPAGESIZE_V(stat_len != 64)); + } else { + /* T5 introduced the separation of the Free List Padding and + * Packing Boundaries. Thus, we can select a smaller Padding + * Boundary to avoid uselessly chewing up PCIe Link and Memory + * Bandwidth, and use a Packing Boundary which is large enough + * to avoid false sharing between CPUs, etc. + * + * For the PCI Link, the smaller the Padding Boundary the + * better. For the Memory Controller, a smaller Padding + * Boundary is better until we cross under the Memory Line + * Size (the minimum unit of transfer to/from Memory). If we + * have a Padding Boundary which is smaller than the Memory + * Line Size, that'll involve a Read-Modify-Write cycle on the + * Memory Controller which is never good. For T5 the smallest + * Padding Boundary which we can select is 32 bytes which is + * larger than any known Memory Controller Line Size so we'll + * use that. + * + * T5 has a different interpretation of the "0" value for the + * Packing Boundary. This corresponds to 16 bytes instead of + * the expected 32 bytes. We never have a Packing Boundary + * less than 32 bytes so we can't use that special value but + * on the other hand, if we wanted 32 bytes, the best we can + * really do is 64 bytes. + */ + if (fl_align <= 32) { + fl_align = 64; + fl_align_log = 6; + } + t4_set_reg_field(adap, SGE_CONTROL_A, + INGPADBOUNDARY_V(INGPADBOUNDARY_M) | + EGRSTATUSPAGESIZE_F, + INGPADBOUNDARY_V(INGPCIEBOUNDARY_32B_X) | + EGRSTATUSPAGESIZE_V(stat_len != 64)); + t4_set_reg_field(adap, SGE_CONTROL2_A, + INGPACKBOUNDARY_V(INGPACKBOUNDARY_M), + INGPACKBOUNDARY_V(fl_align_log - + INGPACKBOUNDARY_SHIFT_X)); + } + /* + * Adjust various SGE Free List Host Buffer Sizes. + * + * This is something of a crock since we're using fixed indices into + * the array which are also known by the sge.c code and the T4 + * Firmware Configuration File. We need to come up with a much better + * approach to managing this array. For now, the first four entries + * are: + * + * 0: Host Page Size + * 1: 64KB + * 2: Buffer size corresponding to 1500 byte MTU (unpacked mode) + * 3: Buffer size corresponding to 9000 byte MTU (unpacked mode) + * + * For the single-MTU buffers in unpacked mode we need to include + * space for the SGE Control Packet Shift, 14 byte Ethernet header, + * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet + * Padding boundary. All of these are accommodated in the Factory + * Default Firmware Configuration File but we need to adjust it for + * this host's cache line size. + */ + t4_write_reg(adap, SGE_FL_BUFFER_SIZE0_A, page_size); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE2_A, + (t4_read_reg(adap, SGE_FL_BUFFER_SIZE2_A) + fl_align-1) + & ~(fl_align-1)); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE3_A, + (t4_read_reg(adap, SGE_FL_BUFFER_SIZE3_A) + fl_align-1) + & ~(fl_align-1)); + + t4_write_reg(adap, ULP_RX_TDDP_PSZ_A, HPZ0_V(page_shift - 12)); + + return 0; +} + +/** + * t4_fw_initialize - ask FW to initialize the device + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * + * Issues a command to FW to partially initialize the device. This + * performs initialization that generally doesn't depend on user input. + */ +int t4_fw_initialize(struct adapter *adap, unsigned int mbox) +{ + struct fw_initialize_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, INITIALIZE, WRITE); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_query_params - query FW or device parameters + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF + * @vf: the VF + * @nparams: the number of parameters + * @params: the parameter names + * @val: the parameter values + * + * Reads the value of FW or device parameters. Up to 7 parameters can be + * queried at once. + */ +int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int nparams, const u32 *params, + u32 *val) +{ + int i, ret; + struct fw_params_cmd c; + __be32 *p = &c.param[0].mnem; + + if (nparams > 7) + return -EINVAL; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(FW_CMD_OP_V(FW_PARAMS_CMD) | FW_CMD_REQUEST_F | + FW_CMD_READ_F | FW_PARAMS_CMD_PFN_V(pf) | + FW_PARAMS_CMD_VFN_V(vf)); + c.retval_len16 = htonl(FW_LEN16(c)); + for (i = 0; i < nparams; i++, p += 2) + *p = htonl(*params++); + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret == 0) + for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2) + *val++ = ntohl(*p); + return ret; +} + +/** + * t4_set_params_nosleep - sets FW or device parameters + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF + * @vf: the VF + * @nparams: the number of parameters + * @params: the parameter names + * @val: the parameter values + * + * Does not ever sleep + * Sets the value of FW or device parameters. Up to 7 parameters can be + * specified at once. + */ +int t4_set_params_nosleep(struct adapter *adap, unsigned int mbox, + unsigned int pf, unsigned int vf, + unsigned int nparams, const u32 *params, + const u32 *val) +{ + struct fw_params_cmd c; + __be32 *p = &c.param[0].mnem; + + if (nparams > 7) + return -EINVAL; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) | + FW_CMD_REQUEST_F | FW_CMD_WRITE_F | + FW_PARAMS_CMD_PFN_V(pf) | + FW_PARAMS_CMD_VFN_V(vf)); + c.retval_len16 = cpu_to_be32(FW_LEN16(c)); + + while (nparams--) { + *p++ = cpu_to_be32(*params++); + *p++ = cpu_to_be32(*val++); + } + + return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_set_params - sets FW or device parameters + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF + * @vf: the VF + * @nparams: the number of parameters + * @params: the parameter names + * @val: the parameter values + * + * Sets the value of FW or device parameters. Up to 7 parameters can be + * specified at once. + */ +int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int nparams, const u32 *params, + const u32 *val) +{ + struct fw_params_cmd c; + __be32 *p = &c.param[0].mnem; + + if (nparams > 7) + return -EINVAL; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(FW_CMD_OP_V(FW_PARAMS_CMD) | FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | FW_PARAMS_CMD_PFN_V(pf) | + FW_PARAMS_CMD_VFN_V(vf)); + c.retval_len16 = htonl(FW_LEN16(c)); + while (nparams--) { + *p++ = htonl(*params++); + *p++ = htonl(*val++); + } + + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_cfg_pfvf - configure PF/VF resource limits + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF being configured + * @vf: the VF being configured + * @txq: the max number of egress queues + * @txq_eth_ctrl: the max number of egress Ethernet or control queues + * @rxqi: the max number of interrupt-capable ingress queues + * @rxq: the max number of interruptless ingress queues + * @tc: the PCI traffic class + * @vi: the max number of virtual interfaces + * @cmask: the channel access rights mask for the PF/VF + * @pmask: the port access rights mask for the PF/VF + * @nexact: the maximum number of exact MPS filters + * @rcaps: read capabilities + * @wxcaps: write/execute capabilities + * + * Configures resource limits and capabilities for a physical or virtual + * function. + */ +int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl, + unsigned int rxqi, unsigned int rxq, unsigned int tc, + unsigned int vi, unsigned int cmask, unsigned int pmask, + unsigned int nexact, unsigned int rcaps, unsigned int wxcaps) +{ + struct fw_pfvf_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(FW_CMD_OP_V(FW_PFVF_CMD) | FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | FW_PFVF_CMD_PFN_V(pf) | + FW_PFVF_CMD_VFN_V(vf)); + c.retval_len16 = htonl(FW_LEN16(c)); + c.niqflint_niq = htonl(FW_PFVF_CMD_NIQFLINT_V(rxqi) | + FW_PFVF_CMD_NIQ_V(rxq)); + c.type_to_neq = htonl(FW_PFVF_CMD_CMASK_V(cmask) | + FW_PFVF_CMD_PMASK_V(pmask) | + FW_PFVF_CMD_NEQ_V(txq)); + c.tc_to_nexactf = htonl(FW_PFVF_CMD_TC_V(tc) | FW_PFVF_CMD_NVI_V(vi) | + FW_PFVF_CMD_NEXACTF_V(nexact)); + c.r_caps_to_nethctrl = htonl(FW_PFVF_CMD_R_CAPS_V(rcaps) | + FW_PFVF_CMD_WX_CAPS_V(wxcaps) | + FW_PFVF_CMD_NETHCTRL_V(txq_eth_ctrl)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_alloc_vi - allocate a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @port: physical port associated with the VI + * @pf: the PF owning the VI + * @vf: the VF owning the VI + * @nmac: number of MAC addresses needed (1 to 5) + * @mac: the MAC addresses of the VI + * @rss_size: size of RSS table slice associated with this VI + * + * Allocates a virtual interface for the given physical port. If @mac is + * not %NULL it contains the MAC addresses of the VI as assigned by FW. + * @mac should be large enough to hold @nmac Ethernet addresses, they are + * stored consecutively so the space needed is @nmac * 6 bytes. + * Returns a negative error number or the non-negative VI id. + */ +int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port, + unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac, + unsigned int *rss_size) +{ + int ret; + struct fw_vi_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(FW_CMD_OP_V(FW_VI_CMD) | FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | FW_CMD_EXEC_F | + FW_VI_CMD_PFN_V(pf) | FW_VI_CMD_VFN_V(vf)); + c.alloc_to_len16 = htonl(FW_VI_CMD_ALLOC_F | FW_LEN16(c)); + c.portid_pkd = FW_VI_CMD_PORTID_V(port); + c.nmac = nmac - 1; + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret) + return ret; + + if (mac) { + memcpy(mac, c.mac, sizeof(c.mac)); + switch (nmac) { + case 5: + memcpy(mac + 24, c.nmac3, sizeof(c.nmac3)); + case 4: + memcpy(mac + 18, c.nmac2, sizeof(c.nmac2)); + case 3: + memcpy(mac + 12, c.nmac1, sizeof(c.nmac1)); + case 2: + memcpy(mac + 6, c.nmac0, sizeof(c.nmac0)); + } + } + if (rss_size) + *rss_size = FW_VI_CMD_RSSSIZE_G(ntohs(c.rsssize_pkd)); + return FW_VI_CMD_VIID_G(ntohs(c.type_viid)); +} + +/** + * t4_set_rxmode - set Rx properties of a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @mtu: the new MTU or -1 + * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change + * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change + * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change + * @vlanex: 1 to enable HW VLAN extraction, 0 to disable it, -1 no change + * @sleep_ok: if true we may sleep while awaiting command completion + * + * Sets Rx properties of a virtual interface. + */ +int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid, + int mtu, int promisc, int all_multi, int bcast, int vlanex, + bool sleep_ok) +{ + struct fw_vi_rxmode_cmd c; + + /* convert to FW values */ + if (mtu < 0) + mtu = FW_RXMODE_MTU_NO_CHG; + if (promisc < 0) + promisc = FW_VI_RXMODE_CMD_PROMISCEN_M; + if (all_multi < 0) + all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_M; + if (bcast < 0) + bcast = FW_VI_RXMODE_CMD_BROADCASTEN_M; + if (vlanex < 0) + vlanex = FW_VI_RXMODE_CMD_VLANEXEN_M; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(FW_CMD_OP_V(FW_VI_RXMODE_CMD) | FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | FW_VI_RXMODE_CMD_VIID_V(viid)); + c.retval_len16 = htonl(FW_LEN16(c)); + c.mtu_to_vlanexen = htonl(FW_VI_RXMODE_CMD_MTU_V(mtu) | + FW_VI_RXMODE_CMD_PROMISCEN_V(promisc) | + FW_VI_RXMODE_CMD_ALLMULTIEN_V(all_multi) | + FW_VI_RXMODE_CMD_BROADCASTEN_V(bcast) | + FW_VI_RXMODE_CMD_VLANEXEN_V(vlanex)); + return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); +} + +/** + * t4_alloc_mac_filt - allocates exact-match filters for MAC addresses + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @free: if true any existing filters for this VI id are first removed + * @naddr: the number of MAC addresses to allocate filters for (up to 7) + * @addr: the MAC address(es) + * @idx: where to store the index of each allocated filter + * @hash: pointer to hash address filter bitmap + * @sleep_ok: call is allowed to sleep + * + * Allocates an exact-match filter for each of the supplied addresses and + * sets it to the corresponding address. If @idx is not %NULL it should + * have at least @naddr entries, each of which will be set to the index of + * the filter allocated for the corresponding MAC address. If a filter + * could not be allocated for an address its index is set to 0xffff. + * If @hash is not %NULL addresses that fail to allocate an exact filter + * are hashed and update the hash filter bitmap pointed at by @hash. + * + * Returns a negative error number or the number of filters allocated. + */ +int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox, + unsigned int viid, bool free, unsigned int naddr, + const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok) +{ + int i, ret; + struct fw_vi_mac_cmd c; + struct fw_vi_mac_exact *p; + unsigned int max_naddr = is_t4(adap->params.chip) ? + NUM_MPS_CLS_SRAM_L_INSTANCES : + NUM_MPS_T5_CLS_SRAM_L_INSTANCES; + + if (naddr > 7) + return -EINVAL; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(FW_CMD_OP_V(FW_VI_MAC_CMD) | FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | (free ? FW_CMD_EXEC_F : 0) | + FW_VI_MAC_CMD_VIID_V(viid)); + c.freemacs_to_len16 = htonl(FW_VI_MAC_CMD_FREEMACS_V(free) | + FW_CMD_LEN16_V((naddr + 2) / 2)); + + for (i = 0, p = c.u.exact; i < naddr; i++, p++) { + p->valid_to_idx = htons(FW_VI_MAC_CMD_VALID_F | + FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_ADD_MAC)); + memcpy(p->macaddr, addr[i], sizeof(p->macaddr)); + } + + ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok); + if (ret) + return ret; + + for (i = 0, p = c.u.exact; i < naddr; i++, p++) { + u16 index = FW_VI_MAC_CMD_IDX_G(ntohs(p->valid_to_idx)); + + if (idx) + idx[i] = index >= max_naddr ? 0xffff : index; + if (index < max_naddr) + ret++; + else if (hash) + *hash |= (1ULL << hash_mac_addr(addr[i])); + } + return ret; +} + +/** + * t4_change_mac - modifies the exact-match filter for a MAC address + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @idx: index of existing filter for old value of MAC address, or -1 + * @addr: the new MAC address value + * @persist: whether a new MAC allocation should be persistent + * @add_smt: if true also add the address to the HW SMT + * + * Modifies an exact-match filter and sets it to the new MAC address. + * Note that in general it is not possible to modify the value of a given + * filter so the generic way to modify an address filter is to free the one + * being used by the old address value and allocate a new filter for the + * new address value. @idx can be -1 if the address is a new addition. + * + * Returns a negative error number or the index of the filter with the new + * MAC value. + */ +int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid, + int idx, const u8 *addr, bool persist, bool add_smt) +{ + int ret, mode; + struct fw_vi_mac_cmd c; + struct fw_vi_mac_exact *p = c.u.exact; + unsigned int max_mac_addr = is_t4(adap->params.chip) ? + NUM_MPS_CLS_SRAM_L_INSTANCES : + NUM_MPS_T5_CLS_SRAM_L_INSTANCES; + + if (idx < 0) /* new allocation */ + idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC; + mode = add_smt ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(FW_CMD_OP_V(FW_VI_MAC_CMD) | FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | FW_VI_MAC_CMD_VIID_V(viid)); + c.freemacs_to_len16 = htonl(FW_CMD_LEN16_V(1)); + p->valid_to_idx = htons(FW_VI_MAC_CMD_VALID_F | + FW_VI_MAC_CMD_SMAC_RESULT_V(mode) | + FW_VI_MAC_CMD_IDX_V(idx)); + memcpy(p->macaddr, addr, sizeof(p->macaddr)); + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret == 0) { + ret = FW_VI_MAC_CMD_IDX_G(ntohs(p->valid_to_idx)); + if (ret >= max_mac_addr) + ret = -ENOMEM; + } + return ret; +} + +/** + * t4_set_addr_hash - program the MAC inexact-match hash filter + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @ucast: whether the hash filter should also match unicast addresses + * @vec: the value to be written to the hash filter + * @sleep_ok: call is allowed to sleep + * + * Sets the 64-bit inexact-match hash filter for a virtual interface. + */ +int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid, + bool ucast, u64 vec, bool sleep_ok) +{ + struct fw_vi_mac_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(FW_CMD_OP_V(FW_VI_MAC_CMD) | FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | FW_VI_ENABLE_CMD_VIID_V(viid)); + c.freemacs_to_len16 = htonl(FW_VI_MAC_CMD_HASHVECEN_F | + FW_VI_MAC_CMD_HASHUNIEN_V(ucast) | + FW_CMD_LEN16_V(1)); + c.u.hash.hashvec = cpu_to_be64(vec); + return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); +} + +/** + * t4_enable_vi_params - enable/disable a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @rx_en: 1=enable Rx, 0=disable Rx + * @tx_en: 1=enable Tx, 0=disable Tx + * @dcb_en: 1=enable delivery of Data Center Bridging messages. + * + * Enables/disables a virtual interface. Note that setting DCB Enable + * only makes sense when enabling a Virtual Interface ... + */ +int t4_enable_vi_params(struct adapter *adap, unsigned int mbox, + unsigned int viid, bool rx_en, bool tx_en, bool dcb_en) +{ + struct fw_vi_enable_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(FW_CMD_OP_V(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | FW_VI_ENABLE_CMD_VIID_V(viid)); + + c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_IEN_V(rx_en) | + FW_VI_ENABLE_CMD_EEN_V(tx_en) | FW_LEN16(c) | + FW_VI_ENABLE_CMD_DCB_INFO_V(dcb_en)); + return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_enable_vi - enable/disable a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @rx_en: 1=enable Rx, 0=disable Rx + * @tx_en: 1=enable Tx, 0=disable Tx + * + * Enables/disables a virtual interface. + */ +int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid, + bool rx_en, bool tx_en) +{ + return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0); +} + +/** + * t4_identify_port - identify a VI's port by blinking its LED + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @nblinks: how many times to blink LED at 2.5 Hz + * + * Identifies a VI's port by blinking its LED. + */ +int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid, + unsigned int nblinks) +{ + struct fw_vi_enable_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(FW_CMD_OP_V(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | FW_VI_ENABLE_CMD_VIID_V(viid)); + c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_LED_F | FW_LEN16(c)); + c.blinkdur = htons(nblinks); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_iq_free - free an ingress queue and its FLs + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queues + * @vf: the VF owning the queues + * @iqtype: the ingress queue type + * @iqid: ingress queue id + * @fl0id: FL0 queue id or 0xffff if no attached FL0 + * @fl1id: FL1 queue id or 0xffff if no attached FL1 + * + * Frees an ingress queue and its associated FLs, if any. + */ +int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int iqtype, unsigned int iqid, + unsigned int fl0id, unsigned int fl1id) +{ + struct fw_iq_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | FW_IQ_CMD_PFN_V(pf) | + FW_IQ_CMD_VFN_V(vf)); + c.alloc_to_len16 = htonl(FW_IQ_CMD_FREE_F | FW_LEN16(c)); + c.type_to_iqandstindex = htonl(FW_IQ_CMD_TYPE_V(iqtype)); + c.iqid = htons(iqid); + c.fl0id = htons(fl0id); + c.fl1id = htons(fl1id); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_eth_eq_free - free an Ethernet egress queue + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queue + * @vf: the VF owning the queue + * @eqid: egress queue id + * + * Frees an Ethernet egress queue. + */ +int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int eqid) +{ + struct fw_eq_eth_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(FW_CMD_OP_V(FW_EQ_ETH_CMD) | FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | FW_EQ_ETH_CMD_PFN_V(pf) | + FW_EQ_ETH_CMD_VFN_V(vf)); + c.alloc_to_len16 = htonl(FW_EQ_ETH_CMD_FREE_F | FW_LEN16(c)); + c.eqid_pkd = htonl(FW_EQ_ETH_CMD_EQID_V(eqid)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_ctrl_eq_free - free a control egress queue + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queue + * @vf: the VF owning the queue + * @eqid: egress queue id + * + * Frees a control egress queue. + */ +int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int eqid) +{ + struct fw_eq_ctrl_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(FW_CMD_OP_V(FW_EQ_CTRL_CMD) | FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | FW_EQ_CTRL_CMD_PFN_V(pf) | + FW_EQ_CTRL_CMD_VFN_V(vf)); + c.alloc_to_len16 = htonl(FW_EQ_CTRL_CMD_FREE_F | FW_LEN16(c)); + c.cmpliqid_eqid = htonl(FW_EQ_CTRL_CMD_EQID_V(eqid)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_ofld_eq_free - free an offload egress queue + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queue + * @vf: the VF owning the queue + * @eqid: egress queue id + * + * Frees a control egress queue. + */ +int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int eqid) +{ + struct fw_eq_ofld_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(FW_CMD_OP_V(FW_EQ_OFLD_CMD) | FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | FW_EQ_OFLD_CMD_PFN_V(pf) | + FW_EQ_OFLD_CMD_VFN_V(vf)); + c.alloc_to_len16 = htonl(FW_EQ_OFLD_CMD_FREE_F | FW_LEN16(c)); + c.eqid_pkd = htonl(FW_EQ_OFLD_CMD_EQID_V(eqid)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_handle_fw_rpl - process a FW reply message + * @adap: the adapter + * @rpl: start of the FW message + * + * Processes a FW message, such as link state change messages. + */ +int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl) +{ + u8 opcode = *(const u8 *)rpl; + + if (opcode == FW_PORT_CMD) { /* link/module state change message */ + int speed = 0, fc = 0; + const struct fw_port_cmd *p = (void *)rpl; + int chan = FW_PORT_CMD_PORTID_G(ntohl(p->op_to_portid)); + int port = adap->chan_map[chan]; + struct port_info *pi = adap2pinfo(adap, port); + struct link_config *lc = &pi->link_cfg; + u32 stat = ntohl(p->u.info.lstatus_to_modtype); + int link_ok = (stat & FW_PORT_CMD_LSTATUS_F) != 0; + u32 mod = FW_PORT_CMD_MODTYPE_G(stat); + + if (stat & FW_PORT_CMD_RXPAUSE_F) + fc |= PAUSE_RX; + if (stat & FW_PORT_CMD_TXPAUSE_F) + fc |= PAUSE_TX; + if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) + speed = 100; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) + speed = 1000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) + speed = 10000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) + speed = 40000; + + if (link_ok != lc->link_ok || speed != lc->speed || + fc != lc->fc) { /* something changed */ + lc->link_ok = link_ok; + lc->speed = speed; + lc->fc = fc; + lc->supported = be16_to_cpu(p->u.info.pcap); + t4_os_link_changed(adap, port, link_ok); + } + if (mod != pi->mod_type) { + pi->mod_type = mod; + t4_os_portmod_changed(adap, port); + } + } + return 0; +} + +static void get_pci_mode(struct adapter *adapter, struct pci_params *p) +{ + u16 val; + + if (pci_is_pcie(adapter->pdev)) { + pcie_capability_read_word(adapter->pdev, PCI_EXP_LNKSTA, &val); + p->speed = val & PCI_EXP_LNKSTA_CLS; + p->width = (val & PCI_EXP_LNKSTA_NLW) >> 4; + } +} + +/** + * init_link_config - initialize a link's SW state + * @lc: structure holding the link state + * @caps: link capabilities + * + * Initializes the SW state maintained for each link, including the link's + * capabilities and default speed/flow-control/autonegotiation settings. + */ +static void init_link_config(struct link_config *lc, unsigned int caps) +{ + lc->supported = caps; + lc->requested_speed = 0; + lc->speed = 0; + lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; + if (lc->supported & FW_PORT_CAP_ANEG) { + lc->advertising = lc->supported & ADVERT_MASK; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->advertising = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + +#define CIM_PF_NOACCESS 0xeeeeeeee + +int t4_wait_dev_ready(void __iomem *regs) +{ + u32 whoami; + + whoami = readl(regs + PL_WHOAMI_A); + if (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS) + return 0; + + msleep(500); + whoami = readl(regs + PL_WHOAMI_A); + return (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS ? 0 : -EIO); +} + +struct flash_desc { + u32 vendor_and_model_id; + u32 size_mb; +}; + +static int get_flash_params(struct adapter *adap) +{ + /* Table for non-Numonix supported flash parts. Numonix parts are left + * to the preexisting code. All flash parts have 64KB sectors. + */ + static struct flash_desc supported_flash[] = { + { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ + }; + + int ret; + u32 info; + + ret = sf1_write(adap, 1, 1, 0, SF_RD_ID); + if (!ret) + ret = sf1_read(adap, 3, 0, 1, &info); + t4_write_reg(adap, SF_OP_A, 0); /* unlock SF */ + if (ret) + return ret; + + for (ret = 0; ret < ARRAY_SIZE(supported_flash); ++ret) + if (supported_flash[ret].vendor_and_model_id == info) { + adap->params.sf_size = supported_flash[ret].size_mb; + adap->params.sf_nsec = + adap->params.sf_size / SF_SEC_SIZE; + return 0; + } + + if ((info & 0xff) != 0x20) /* not a Numonix flash */ + return -EINVAL; + info >>= 16; /* log2 of size */ + if (info >= 0x14 && info < 0x18) + adap->params.sf_nsec = 1 << (info - 16); + else if (info == 0x18) + adap->params.sf_nsec = 64; + else + return -EINVAL; + adap->params.sf_size = 1 << info; + adap->params.sf_fw_start = + t4_read_reg(adap, CIM_BOOT_CFG_A) & BOOTADDR_M; + + if (adap->params.sf_size < FLASH_MIN_SIZE) + dev_warn(adap->pdev_dev, "WARNING!!! FLASH size %#x < %#x!!!\n", + adap->params.sf_size, FLASH_MIN_SIZE); + return 0; +} + +/** + * t4_prep_adapter - prepare SW and HW for operation + * @adapter: the adapter + * @reset: if true perform a HW reset + * + * Initialize adapter SW state for the various HW modules, set initial + * values for some adapter tunables, take PHYs out of reset, and + * initialize the MDIO interface. + */ +int t4_prep_adapter(struct adapter *adapter) +{ + int ret, ver; + uint16_t device_id; + u32 pl_rev; + + get_pci_mode(adapter, &adapter->params.pci); + pl_rev = REV_G(t4_read_reg(adapter, PL_REV_A)); + + ret = get_flash_params(adapter); + if (ret < 0) { + dev_err(adapter->pdev_dev, "error %d identifying flash\n", ret); + return ret; + } + + /* Retrieve adapter's device ID + */ + pci_read_config_word(adapter->pdev, PCI_DEVICE_ID, &device_id); + ver = device_id >> 12; + adapter->params.chip = 0; + switch (ver) { + case CHELSIO_T4: + adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T4, pl_rev); + break; + case CHELSIO_T5: + adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev); + break; + default: + dev_err(adapter->pdev_dev, "Device %d is not supported\n", + device_id); + return -EINVAL; + } + + adapter->params.cim_la_size = CIMLA_SIZE; + init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); + + /* + * Default port for debugging in case we can't reach FW. + */ + adapter->params.nports = 1; + adapter->params.portvec = 1; + adapter->params.vpd.cclk = 50000; + return 0; +} + +/** + * cxgb4_t4_bar2_sge_qregs - return BAR2 SGE Queue register information + * @adapter: the adapter + * @qid: the Queue ID + * @qtype: the Ingress or Egress type for @qid + * @pbar2_qoffset: BAR2 Queue Offset + * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues + * + * Returns the BAR2 SGE Queue Registers information associated with the + * indicated Absolute Queue ID. These are passed back in return value + * pointers. @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue + * and T4_BAR2_QTYPE_INGRESS for Ingress Queues. + * + * This may return an error which indicates that BAR2 SGE Queue + * registers aren't available. If an error is not returned, then the + * following values are returned: + * + * *@pbar2_qoffset: the BAR2 Offset of the @qid Registers + * *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid + * + * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which + * require the "Inferred Queue ID" ability may be used. E.g. the + * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0, + * then these "Inferred Queue ID" register may not be used. + */ +int cxgb4_t4_bar2_sge_qregs(struct adapter *adapter, + unsigned int qid, + enum t4_bar2_qtype qtype, + u64 *pbar2_qoffset, + unsigned int *pbar2_qid) +{ + unsigned int page_shift, page_size, qpp_shift, qpp_mask; + u64 bar2_page_offset, bar2_qoffset; + unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred; + + /* T4 doesn't support BAR2 SGE Queue registers. + */ + if (is_t4(adapter->params.chip)) + return -EINVAL; + + /* Get our SGE Page Size parameters. + */ + page_shift = adapter->params.sge.hps + 10; + page_size = 1 << page_shift; + + /* Get the right Queues per Page parameters for our Queue. + */ + qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS + ? adapter->params.sge.eq_qpp + : adapter->params.sge.iq_qpp); + qpp_mask = (1 << qpp_shift) - 1; + + /* Calculate the basics of the BAR2 SGE Queue register area: + * o The BAR2 page the Queue registers will be in. + * o The BAR2 Queue ID. + * o The BAR2 Queue ID Offset into the BAR2 page. + */ + bar2_page_offset = ((qid >> qpp_shift) << page_shift); + bar2_qid = qid & qpp_mask; + bar2_qid_offset = bar2_qid * SGE_UDB_SIZE; + + /* If the BAR2 Queue ID Offset is less than the Page Size, then the + * hardware will infer the Absolute Queue ID simply from the writes to + * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a + * BAR2 Queue ID of 0 for those writes). Otherwise, we'll simply + * write to the first BAR2 SGE Queue Area within the BAR2 Page with + * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID + * from the BAR2 Page and BAR2 Queue ID. + * + * One important censequence of this is that some BAR2 SGE registers + * have a "Queue ID" field and we can write the BAR2 SGE Queue ID + * there. But other registers synthesize the SGE Queue ID purely + * from the writes to the registers -- the Write Combined Doorbell + * Buffer is a good example. These BAR2 SGE Registers are only + * available for those BAR2 SGE Register areas where the SGE Absolute + * Queue ID can be inferred from simple writes. + */ + bar2_qoffset = bar2_page_offset; + bar2_qinferred = (bar2_qid_offset < page_size); + if (bar2_qinferred) { + bar2_qoffset += bar2_qid_offset; + bar2_qid = 0; + } + + *pbar2_qoffset = bar2_qoffset; + *pbar2_qid = bar2_qid; + return 0; +} + +/** + * t4_init_devlog_params - initialize adapter->params.devlog + * @adap: the adapter + * + * Initialize various fields of the adapter's Firmware Device Log + * Parameters structure. + */ +int t4_init_devlog_params(struct adapter *adap) +{ + struct devlog_params *dparams = &adap->params.devlog; + u32 pf_dparams; + unsigned int devlog_meminfo; + struct fw_devlog_cmd devlog_cmd; + int ret; + + /* If we're dealing with newer firmware, the Device Log Paramerters + * are stored in a designated register which allows us to access the + * Device Log even if we can't talk to the firmware. + */ + pf_dparams = + t4_read_reg(adap, PCIE_FW_REG(PCIE_FW_PF_A, PCIE_FW_PF_DEVLOG)); + if (pf_dparams) { + unsigned int nentries, nentries128; + + dparams->memtype = PCIE_FW_PF_DEVLOG_MEMTYPE_G(pf_dparams); + dparams->start = PCIE_FW_PF_DEVLOG_ADDR16_G(pf_dparams) << 4; + + nentries128 = PCIE_FW_PF_DEVLOG_NENTRIES128_G(pf_dparams); + nentries = (nentries128 + 1) * 128; + dparams->size = nentries * sizeof(struct fw_devlog_e); + + return 0; + } + + /* Otherwise, ask the firmware for it's Device Log Parameters. + */ + memset(&devlog_cmd, 0, sizeof(devlog_cmd)); + devlog_cmd.op_to_write = htonl(FW_CMD_OP_V(FW_DEVLOG_CMD) | + FW_CMD_REQUEST_F | FW_CMD_READ_F); + devlog_cmd.retval_len16 = htonl(FW_LEN16(devlog_cmd)); + ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd), + &devlog_cmd); + if (ret) + return ret; + + devlog_meminfo = ntohl(devlog_cmd.memtype_devlog_memaddr16_devlog); + dparams->memtype = FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(devlog_meminfo); + dparams->start = FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(devlog_meminfo) << 4; + dparams->size = ntohl(devlog_cmd.memsize_devlog); + + return 0; +} + +/** + * t4_init_sge_params - initialize adap->params.sge + * @adapter: the adapter + * + * Initialize various fields of the adapter's SGE Parameters structure. + */ +int t4_init_sge_params(struct adapter *adapter) +{ + struct sge_params *sge_params = &adapter->params.sge; + u32 hps, qpp; + unsigned int s_hps, s_qpp; + + /* Extract the SGE Page Size for our PF. + */ + hps = t4_read_reg(adapter, SGE_HOST_PAGE_SIZE_A); + s_hps = (HOSTPAGESIZEPF0_S + + (HOSTPAGESIZEPF1_S - HOSTPAGESIZEPF0_S) * adapter->fn); + sge_params->hps = ((hps >> s_hps) & HOSTPAGESIZEPF0_M); + + /* Extract the SGE Egress and Ingess Queues Per Page for our PF. + */ + s_qpp = (QUEUESPERPAGEPF0_S + + (QUEUESPERPAGEPF1_S - QUEUESPERPAGEPF0_S) * adapter->fn); + qpp = t4_read_reg(adapter, SGE_EGRESS_QUEUES_PER_PAGE_PF_A); + sge_params->eq_qpp = ((qpp >> s_qpp) & QUEUESPERPAGEPF0_M); + qpp = t4_read_reg(adapter, SGE_INGRESS_QUEUES_PER_PAGE_PF_A); + sge_params->iq_qpp = ((qpp >> s_qpp) & QUEUESPERPAGEPF0_M); + + return 0; +} + +/** + * t4_init_tp_params - initialize adap->params.tp + * @adap: the adapter + * + * Initialize various fields of the adapter's TP Parameters structure. + */ +int t4_init_tp_params(struct adapter *adap) +{ + int chan; + u32 v; + + v = t4_read_reg(adap, TP_TIMER_RESOLUTION_A); + adap->params.tp.tre = TIMERRESOLUTION_G(v); + adap->params.tp.dack_re = DELAYEDACKRESOLUTION_G(v); + + /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */ + for (chan = 0; chan < NCHAN; chan++) + adap->params.tp.tx_modq[chan] = chan; + + /* Cache the adapter's Compressed Filter Mode and global Incress + * Configuration. + */ + t4_read_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, + &adap->params.tp.vlan_pri_map, 1, + TP_VLAN_PRI_MAP_A); + t4_read_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, + &adap->params.tp.ingress_config, 1, + TP_INGRESS_CONFIG_A); + + /* Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field + * shift positions of several elements of the Compressed Filter Tuple + * for this adapter which we need frequently ... + */ + adap->params.tp.vlan_shift = t4_filter_field_shift(adap, VLAN_F); + adap->params.tp.vnic_shift = t4_filter_field_shift(adap, VNIC_ID_F); + adap->params.tp.port_shift = t4_filter_field_shift(adap, PORT_F); + adap->params.tp.protocol_shift = t4_filter_field_shift(adap, + PROTOCOL_F); + + /* If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID + * represents the presence of an Outer VLAN instead of a VNIC ID. + */ + if ((adap->params.tp.ingress_config & VNIC_F) == 0) + adap->params.tp.vnic_shift = -1; + + return 0; +} + +/** + * t4_filter_field_shift - calculate filter field shift + * @adap: the adapter + * @filter_sel: the desired field (from TP_VLAN_PRI_MAP bits) + * + * Return the shift position of a filter field within the Compressed + * Filter Tuple. The filter field is specified via its selection bit + * within TP_VLAN_PRI_MAL (filter mode). E.g. F_VLAN. + */ +int t4_filter_field_shift(const struct adapter *adap, int filter_sel) +{ + unsigned int filter_mode = adap->params.tp.vlan_pri_map; + unsigned int sel; + int field_shift; + + if ((filter_mode & filter_sel) == 0) + return -1; + + for (sel = 1, field_shift = 0; sel < filter_sel; sel <<= 1) { + switch (filter_mode & sel) { + case FCOE_F: + field_shift += FT_FCOE_W; + break; + case PORT_F: + field_shift += FT_PORT_W; + break; + case VNIC_ID_F: + field_shift += FT_VNIC_ID_W; + break; + case VLAN_F: + field_shift += FT_VLAN_W; + break; + case TOS_F: + field_shift += FT_TOS_W; + break; + case PROTOCOL_F: + field_shift += FT_PROTOCOL_W; + break; + case ETHERTYPE_F: + field_shift += FT_ETHERTYPE_W; + break; + case MACMATCH_F: + field_shift += FT_MACMATCH_W; + break; + case MPSHITTYPE_F: + field_shift += FT_MPSHITTYPE_W; + break; + case FRAGMENTATION_F: + field_shift += FT_FRAGMENTATION_W; + break; + } + } + return field_shift; +} + +int t4_port_init(struct adapter *adap, int mbox, int pf, int vf) +{ + u8 addr[6]; + int ret, i, j = 0; + struct fw_port_cmd c; + struct fw_rss_vi_config_cmd rvc; + + memset(&c, 0, sizeof(c)); + memset(&rvc, 0, sizeof(rvc)); + + for_each_port(adap, i) { + unsigned int rss_size; + struct port_info *p = adap2pinfo(adap, i); + + while ((adap->params.portvec & (1 << j)) == 0) + j++; + + c.op_to_portid = htonl(FW_CMD_OP_V(FW_PORT_CMD) | + FW_CMD_REQUEST_F | FW_CMD_READ_F | + FW_PORT_CMD_PORTID_V(j)); + c.action_to_len16 = htonl( + FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_GET_PORT_INFO) | + FW_LEN16(c)); + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret) + return ret; + + ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size); + if (ret < 0) + return ret; + + p->viid = ret; + p->tx_chan = j; + p->lport = j; + p->rss_size = rss_size; + memcpy(adap->port[i]->dev_addr, addr, ETH_ALEN); + adap->port[i]->dev_port = j; + + ret = ntohl(c.u.info.lstatus_to_modtype); + p->mdio_addr = (ret & FW_PORT_CMD_MDIOCAP_F) ? + FW_PORT_CMD_MDIOADDR_G(ret) : -1; + p->port_type = FW_PORT_CMD_PTYPE_G(ret); + p->mod_type = FW_PORT_MOD_TYPE_NA; + + rvc.op_to_viid = htonl(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) | + FW_CMD_REQUEST_F | FW_CMD_READ_F | + FW_RSS_VI_CONFIG_CMD_VIID(p->viid)); + rvc.retval_len16 = htonl(FW_LEN16(rvc)); + ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc); + if (ret) + return ret; + p->rss_mode = ntohl(rvc.u.basicvirtual.defaultq_to_udpen); + + init_link_config(&p->link_cfg, ntohs(c.u.info.pcap)); + j++; + } + return 0; +} + +/** + * t4_read_cimq_cfg - read CIM queue configuration + * @adap: the adapter + * @base: holds the queue base addresses in bytes + * @size: holds the queue sizes in bytes + * @thres: holds the queue full thresholds in bytes + * + * Returns the current configuration of the CIM queues, starting with + * the IBQs, then the OBQs. + */ +void t4_read_cimq_cfg(struct adapter *adap, u16 *base, u16 *size, u16 *thres) +{ + unsigned int i, v; + int cim_num_obq = is_t4(adap->params.chip) ? + CIM_NUM_OBQ : CIM_NUM_OBQ_T5; + + for (i = 0; i < CIM_NUM_IBQ; i++) { + t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, IBQSELECT_F | + QUENUMSELECT_V(i)); + v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A); + /* value is in 256-byte units */ + *base++ = CIMQBASE_G(v) * 256; + *size++ = CIMQSIZE_G(v) * 256; + *thres++ = QUEFULLTHRSH_G(v) * 8; /* 8-byte unit */ + } + for (i = 0; i < cim_num_obq; i++) { + t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, OBQSELECT_F | + QUENUMSELECT_V(i)); + v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A); + /* value is in 256-byte units */ + *base++ = CIMQBASE_G(v) * 256; + *size++ = CIMQSIZE_G(v) * 256; + } +} + +/** + * t4_read_cim_ibq - read the contents of a CIM inbound queue + * @adap: the adapter + * @qid: the queue index + * @data: where to store the queue contents + * @n: capacity of @data in 32-bit words + * + * Reads the contents of the selected CIM queue starting at address 0 up + * to the capacity of @data. @n must be a multiple of 4. Returns < 0 on + * error and the number of 32-bit words actually read on success. + */ +int t4_read_cim_ibq(struct adapter *adap, unsigned int qid, u32 *data, size_t n) +{ + int i, err, attempts; + unsigned int addr; + const unsigned int nwords = CIM_IBQ_SIZE * 4; + + if (qid > 5 || (n & 3)) + return -EINVAL; + + addr = qid * nwords; + if (n > nwords) + n = nwords; + + /* It might take 3-10ms before the IBQ debug read access is allowed. + * Wait for 1 Sec with a delay of 1 usec. + */ + attempts = 1000000; + + for (i = 0; i < n; i++, addr++) { + t4_write_reg(adap, CIM_IBQ_DBG_CFG_A, IBQDBGADDR_V(addr) | + IBQDBGEN_F); + err = t4_wait_op_done(adap, CIM_IBQ_DBG_CFG_A, IBQDBGBUSY_F, 0, + attempts, 1); + if (err) + return err; + *data++ = t4_read_reg(adap, CIM_IBQ_DBG_DATA_A); + } + t4_write_reg(adap, CIM_IBQ_DBG_CFG_A, 0); + return i; +} + +/** + * t4_read_cim_obq - read the contents of a CIM outbound queue + * @adap: the adapter + * @qid: the queue index + * @data: where to store the queue contents + * @n: capacity of @data in 32-bit words + * + * Reads the contents of the selected CIM queue starting at address 0 up + * to the capacity of @data. @n must be a multiple of 4. Returns < 0 on + * error and the number of 32-bit words actually read on success. + */ +int t4_read_cim_obq(struct adapter *adap, unsigned int qid, u32 *data, size_t n) +{ + int i, err; + unsigned int addr, v, nwords; + int cim_num_obq = is_t4(adap->params.chip) ? + CIM_NUM_OBQ : CIM_NUM_OBQ_T5; + + if ((qid > (cim_num_obq - 1)) || (n & 3)) + return -EINVAL; + + t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, OBQSELECT_F | + QUENUMSELECT_V(qid)); + v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A); + + addr = CIMQBASE_G(v) * 64; /* muliple of 256 -> muliple of 4 */ + nwords = CIMQSIZE_G(v) * 64; /* same */ + if (n > nwords) + n = nwords; + + for (i = 0; i < n; i++, addr++) { + t4_write_reg(adap, CIM_OBQ_DBG_CFG_A, OBQDBGADDR_V(addr) | + OBQDBGEN_F); + err = t4_wait_op_done(adap, CIM_OBQ_DBG_CFG_A, OBQDBGBUSY_F, 0, + 2, 1); + if (err) + return err; + *data++ = t4_read_reg(adap, CIM_OBQ_DBG_DATA_A); + } + t4_write_reg(adap, CIM_OBQ_DBG_CFG_A, 0); + return i; +} + +/** + * t4_cim_read - read a block from CIM internal address space + * @adap: the adapter + * @addr: the start address within the CIM address space + * @n: number of words to read + * @valp: where to store the result + * + * Reads a block of 4-byte words from the CIM intenal address space. + */ +int t4_cim_read(struct adapter *adap, unsigned int addr, unsigned int n, + unsigned int *valp) +{ + int ret = 0; + + if (t4_read_reg(adap, CIM_HOST_ACC_CTRL_A) & HOSTBUSY_F) + return -EBUSY; + + for ( ; !ret && n--; addr += 4) { + t4_write_reg(adap, CIM_HOST_ACC_CTRL_A, addr); + ret = t4_wait_op_done(adap, CIM_HOST_ACC_CTRL_A, HOSTBUSY_F, + 0, 5, 2); + if (!ret) + *valp++ = t4_read_reg(adap, CIM_HOST_ACC_DATA_A); + } + return ret; +} + +/** + * t4_cim_write - write a block into CIM internal address space + * @adap: the adapter + * @addr: the start address within the CIM address space + * @n: number of words to write + * @valp: set of values to write + * + * Writes a block of 4-byte words into the CIM intenal address space. + */ +int t4_cim_write(struct adapter *adap, unsigned int addr, unsigned int n, + const unsigned int *valp) +{ + int ret = 0; + + if (t4_read_reg(adap, CIM_HOST_ACC_CTRL_A) & HOSTBUSY_F) + return -EBUSY; + + for ( ; !ret && n--; addr += 4) { + t4_write_reg(adap, CIM_HOST_ACC_DATA_A, *valp++); + t4_write_reg(adap, CIM_HOST_ACC_CTRL_A, addr | HOSTWRITE_F); + ret = t4_wait_op_done(adap, CIM_HOST_ACC_CTRL_A, HOSTBUSY_F, + 0, 5, 2); + } + return ret; +} + +static int t4_cim_write1(struct adapter *adap, unsigned int addr, + unsigned int val) +{ + return t4_cim_write(adap, addr, 1, &val); +} + +/** + * t4_cim_read_la - read CIM LA capture buffer + * @adap: the adapter + * @la_buf: where to store the LA data + * @wrptr: the HW write pointer within the capture buffer + * + * Reads the contents of the CIM LA buffer with the most recent entry at + * the end of the returned data and with the entry at @wrptr first. + * We try to leave the LA in the running state we find it in. + */ +int t4_cim_read_la(struct adapter *adap, u32 *la_buf, unsigned int *wrptr) +{ + int i, ret; + unsigned int cfg, val, idx; + + ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &cfg); + if (ret) + return ret; + + if (cfg & UPDBGLAEN_F) { /* LA is running, freeze it */ + ret = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A, 0); + if (ret) + return ret; + } + + ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &val); + if (ret) + goto restart; + + idx = UPDBGLAWRPTR_G(val); + if (wrptr) + *wrptr = idx; + + for (i = 0; i < adap->params.cim_la_size; i++) { + ret = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A, + UPDBGLARDPTR_V(idx) | UPDBGLARDEN_F); + if (ret) + break; + ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &val); + if (ret) + break; + if (val & UPDBGLARDEN_F) { + ret = -ETIMEDOUT; + break; + } + ret = t4_cim_read(adap, UP_UP_DBG_LA_DATA_A, 1, &la_buf[i]); + if (ret) + break; + idx = (idx + 1) & UPDBGLARDPTR_M; + } +restart: + if (cfg & UPDBGLAEN_F) { + int r = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A, + cfg & ~UPDBGLARDEN_F); + if (!ret) + ret = r; + } + return ret; +} + +/** + * t4_tp_read_la - read TP LA capture buffer + * @adap: the adapter + * @la_buf: where to store the LA data + * @wrptr: the HW write pointer within the capture buffer + * + * Reads the contents of the TP LA buffer with the most recent entry at + * the end of the returned data and with the entry at @wrptr first. + * We leave the LA in the running state we find it in. + */ +void t4_tp_read_la(struct adapter *adap, u64 *la_buf, unsigned int *wrptr) +{ + bool last_incomplete; + unsigned int i, cfg, val, idx; + + cfg = t4_read_reg(adap, TP_DBG_LA_CONFIG_A) & 0xffff; + if (cfg & DBGLAENABLE_F) /* freeze LA */ + t4_write_reg(adap, TP_DBG_LA_CONFIG_A, + adap->params.tp.la_mask | (cfg ^ DBGLAENABLE_F)); + + val = t4_read_reg(adap, TP_DBG_LA_CONFIG_A); + idx = DBGLAWPTR_G(val); + last_incomplete = DBGLAMODE_G(val) >= 2 && (val & DBGLAWHLF_F) == 0; + if (last_incomplete) + idx = (idx + 1) & DBGLARPTR_M; + if (wrptr) + *wrptr = idx; + + val &= 0xffff; + val &= ~DBGLARPTR_V(DBGLARPTR_M); + val |= adap->params.tp.la_mask; + + for (i = 0; i < TPLA_SIZE; i++) { + t4_write_reg(adap, TP_DBG_LA_CONFIG_A, DBGLARPTR_V(idx) | val); + la_buf[i] = t4_read_reg64(adap, TP_DBG_LA_DATAL_A); + idx = (idx + 1) & DBGLARPTR_M; + } + + /* Wipe out last entry if it isn't valid */ + if (last_incomplete) + la_buf[TPLA_SIZE - 1] = ~0ULL; + + if (cfg & DBGLAENABLE_F) /* restore running state */ + t4_write_reg(adap, TP_DBG_LA_CONFIG_A, + cfg | adap->params.tp.la_mask); +}