X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fnet%2Fethernet%2Fbroadcom%2Fbnx2x%2Fbnx2x_main.c;fp=kernel%2Fdrivers%2Fnet%2Fethernet%2Fbroadcom%2Fbnx2x%2Fbnx2x_main.c;h=8a97d28f3d6509facc9dd2dcc29921cbebfd7616;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/kernel/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c new file mode 100644 index 000000000..8a97d28f3 --- /dev/null +++ b/kernel/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -0,0 +1,14884 @@ +/* bnx2x_main.c: Broadcom Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + * UDP CSUM errata workaround by Arik Gendelman + * Slowpath and fastpath rework by Vladislav Zolotarov + * Statistics and Link management by Yitchak Gertner + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include /* for dev_info() */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "bnx2x.h" +#include "bnx2x_init.h" +#include "bnx2x_init_ops.h" +#include "bnx2x_cmn.h" +#include "bnx2x_vfpf.h" +#include "bnx2x_dcb.h" +#include "bnx2x_sp.h" +#include +#include "bnx2x_fw_file_hdr.h" +/* FW files */ +#define FW_FILE_VERSION \ + __stringify(BCM_5710_FW_MAJOR_VERSION) "." \ + __stringify(BCM_5710_FW_MINOR_VERSION) "." \ + __stringify(BCM_5710_FW_REVISION_VERSION) "." \ + __stringify(BCM_5710_FW_ENGINEERING_VERSION) +#define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw" +#define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw" +#define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw" + +/* Time in jiffies before concluding the transmitter is hung */ +#define TX_TIMEOUT (5*HZ) + +static char version[] = + "Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver " + DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + +MODULE_AUTHOR("Eliezer Tamir"); +MODULE_DESCRIPTION("Broadcom NetXtreme II " + "BCM57710/57711/57711E/" + "57712/57712_MF/57800/57800_MF/57810/57810_MF/" + "57840/57840_MF Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); +MODULE_FIRMWARE(FW_FILE_NAME_E1); +MODULE_FIRMWARE(FW_FILE_NAME_E1H); +MODULE_FIRMWARE(FW_FILE_NAME_E2); + +int bnx2x_num_queues; +module_param_named(num_queues, bnx2x_num_queues, int, S_IRUGO); +MODULE_PARM_DESC(num_queues, + " Set number of queues (default is as a number of CPUs)"); + +static int disable_tpa; +module_param(disable_tpa, int, S_IRUGO); +MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature"); + +static int int_mode; +module_param(int_mode, int, S_IRUGO); +MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X " + "(1 INT#x; 2 MSI)"); + +static int dropless_fc; +module_param(dropless_fc, int, S_IRUGO); +MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring"); + +static int mrrs = -1; +module_param(mrrs, int, S_IRUGO); +MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)"); + +static int debug; +module_param(debug, int, S_IRUGO); +MODULE_PARM_DESC(debug, " Default debug msglevel"); + +static struct workqueue_struct *bnx2x_wq; +struct workqueue_struct *bnx2x_iov_wq; + +struct bnx2x_mac_vals { + u32 xmac_addr; + u32 xmac_val; + u32 emac_addr; + u32 emac_val; + u32 umac_addr[2]; + u32 umac_val[2]; + u32 bmac_addr; + u32 bmac_val[2]; +}; + +enum bnx2x_board_type { + BCM57710 = 0, + BCM57711, + BCM57711E, + BCM57712, + BCM57712_MF, + BCM57712_VF, + BCM57800, + BCM57800_MF, + BCM57800_VF, + BCM57810, + BCM57810_MF, + BCM57810_VF, + BCM57840_4_10, + BCM57840_2_20, + BCM57840_MF, + BCM57840_VF, + BCM57811, + BCM57811_MF, + BCM57840_O, + BCM57840_MFO, + BCM57811_VF +}; + +/* indexed by board_type, above */ +static struct { + char *name; +} board_info[] = { + [BCM57710] = { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" }, + [BCM57711] = { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" }, + [BCM57711E] = { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" }, + [BCM57712] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" }, + [BCM57712_MF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" }, + [BCM57712_VF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Virtual Function" }, + [BCM57800] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" }, + [BCM57800_MF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" }, + [BCM57800_VF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Virtual Function" }, + [BCM57810] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" }, + [BCM57810_MF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" }, + [BCM57810_VF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Virtual Function" }, + [BCM57840_4_10] = { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" }, + [BCM57840_2_20] = { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" }, + [BCM57840_MF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" }, + [BCM57840_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" }, + [BCM57811] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet" }, + [BCM57811_MF] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function" }, + [BCM57840_O] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" }, + [BCM57840_MFO] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" }, + [BCM57811_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" } +}; + +#ifndef PCI_DEVICE_ID_NX2_57710 +#define PCI_DEVICE_ID_NX2_57710 CHIP_NUM_57710 +#endif +#ifndef PCI_DEVICE_ID_NX2_57711 +#define PCI_DEVICE_ID_NX2_57711 CHIP_NUM_57711 +#endif +#ifndef PCI_DEVICE_ID_NX2_57711E +#define PCI_DEVICE_ID_NX2_57711E CHIP_NUM_57711E +#endif +#ifndef PCI_DEVICE_ID_NX2_57712 +#define PCI_DEVICE_ID_NX2_57712 CHIP_NUM_57712 +#endif +#ifndef PCI_DEVICE_ID_NX2_57712_MF +#define PCI_DEVICE_ID_NX2_57712_MF CHIP_NUM_57712_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57712_VF +#define PCI_DEVICE_ID_NX2_57712_VF CHIP_NUM_57712_VF +#endif +#ifndef PCI_DEVICE_ID_NX2_57800 +#define PCI_DEVICE_ID_NX2_57800 CHIP_NUM_57800 +#endif +#ifndef PCI_DEVICE_ID_NX2_57800_MF +#define PCI_DEVICE_ID_NX2_57800_MF CHIP_NUM_57800_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57800_VF +#define PCI_DEVICE_ID_NX2_57800_VF CHIP_NUM_57800_VF +#endif +#ifndef PCI_DEVICE_ID_NX2_57810 +#define PCI_DEVICE_ID_NX2_57810 CHIP_NUM_57810 +#endif +#ifndef PCI_DEVICE_ID_NX2_57810_MF +#define PCI_DEVICE_ID_NX2_57810_MF CHIP_NUM_57810_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_O +#define PCI_DEVICE_ID_NX2_57840_O CHIP_NUM_57840_OBSOLETE +#endif +#ifndef PCI_DEVICE_ID_NX2_57810_VF +#define PCI_DEVICE_ID_NX2_57810_VF CHIP_NUM_57810_VF +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_4_10 +#define PCI_DEVICE_ID_NX2_57840_4_10 CHIP_NUM_57840_4_10 +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_2_20 +#define PCI_DEVICE_ID_NX2_57840_2_20 CHIP_NUM_57840_2_20 +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_MFO +#define PCI_DEVICE_ID_NX2_57840_MFO CHIP_NUM_57840_MF_OBSOLETE +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_MF +#define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_VF +#define PCI_DEVICE_ID_NX2_57840_VF CHIP_NUM_57840_VF +#endif +#ifndef PCI_DEVICE_ID_NX2_57811 +#define PCI_DEVICE_ID_NX2_57811 CHIP_NUM_57811 +#endif +#ifndef PCI_DEVICE_ID_NX2_57811_MF +#define PCI_DEVICE_ID_NX2_57811_MF CHIP_NUM_57811_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57811_VF +#define PCI_DEVICE_ID_NX2_57811_VF CHIP_NUM_57811_VF +#endif + +static const struct pci_device_id bnx2x_pci_tbl[] = { + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712), BCM57712 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_MF), BCM57712_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_VF), BCM57712_VF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800), BCM57800 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_MF), BCM57800_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_VF), BCM57800_VF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810), BCM57810 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_O), BCM57840_O }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_2_20), BCM57840_2_20 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_VF), BCM57810_VF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MFO), BCM57840_MFO }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811), BCM57811 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_MF), BCM57811_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_VF), BCM57811_VF }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl); + +/* Global resources for unloading a previously loaded device */ +#define BNX2X_PREV_WAIT_NEEDED 1 +static DEFINE_SEMAPHORE(bnx2x_prev_sem); +static LIST_HEAD(bnx2x_prev_list); + +/* Forward declaration */ +static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev); +static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp); +static int bnx2x_set_storm_rx_mode(struct bnx2x *bp); + +/**************************************************************************** +* General service functions +****************************************************************************/ + +static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr); + +static void __storm_memset_dma_mapping(struct bnx2x *bp, + u32 addr, dma_addr_t mapping) +{ + REG_WR(bp, addr, U64_LO(mapping)); + REG_WR(bp, addr + 4, U64_HI(mapping)); +} + +static void storm_memset_spq_addr(struct bnx2x *bp, + dma_addr_t mapping, u16 abs_fid) +{ + u32 addr = XSEM_REG_FAST_MEMORY + + XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid); + + __storm_memset_dma_mapping(bp, addr, mapping); +} + +static void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid, + u16 pf_id) +{ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); +} + +static void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid, + u8 enable) +{ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid), + enable); +} + +static void storm_memset_eq_data(struct bnx2x *bp, + struct event_ring_data *eq_data, + u16 pfid) +{ + size_t size = sizeof(struct event_ring_data); + + u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid); + + __storm_memset_struct(bp, addr, size, (u32 *)eq_data); +} + +static void storm_memset_eq_prod(struct bnx2x *bp, u16 eq_prod, + u16 pfid) +{ + u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_PROD_OFFSET(pfid); + REG_WR16(bp, addr, eq_prod); +} + +/* used only at init + * locking is done by mcp + */ +static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val) +{ + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); + pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val); + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, + PCICFG_VENDOR_ID_OFFSET); +} + +static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr) +{ + u32 val; + + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); + pci_read_config_dword(bp->pdev, PCICFG_GRC_DATA, &val); + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, + PCICFG_VENDOR_ID_OFFSET); + + return val; +} + +#define DMAE_DP_SRC_GRC "grc src_addr [%08x]" +#define DMAE_DP_SRC_PCI "pci src_addr [%x:%08x]" +#define DMAE_DP_DST_GRC "grc dst_addr [%08x]" +#define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]" +#define DMAE_DP_DST_NONE "dst_addr [none]" + +static void bnx2x_dp_dmae(struct bnx2x *bp, + struct dmae_command *dmae, int msglvl) +{ + u32 src_type = dmae->opcode & DMAE_COMMAND_SRC; + int i; + + switch (dmae->opcode & DMAE_COMMAND_DST) { + case DMAE_CMD_DST_PCI: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%x:%08x], len [%d*4], dst [%x:%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%08x], len [%d*4], dst [%x:%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + case DMAE_CMD_DST_GRC: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%x:%08x], len [%d*4], dst_addr [%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->dst_addr_lo >> 2, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%08x], len [%d*4], dst [%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->dst_addr_lo >> 2, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + default: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n" + "comp_addr [%x:%08x] comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src_addr [%08x] len [%d * 4] dst_addr [none]\n" + "comp_addr [%x:%08x] comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + } + + for (i = 0; i < (sizeof(struct dmae_command)/4); i++) + DP(msglvl, "DMAE RAW [%02d]: 0x%08x\n", + i, *(((u32 *)dmae) + i)); +} + +/* copy command into DMAE command memory and set DMAE command go */ +void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx) +{ + u32 cmd_offset; + int i; + + cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx); + for (i = 0; i < (sizeof(struct dmae_command)/4); i++) { + REG_WR(bp, cmd_offset + i*4, *(((u32 *)dmae) + i)); + } + REG_WR(bp, dmae_reg_go_c[idx], 1); +} + +u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type) +{ + return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) | + DMAE_CMD_C_ENABLE); +} + +u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode) +{ + return opcode & ~DMAE_CMD_SRC_RESET; +} + +u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, + bool with_comp, u8 comp_type) +{ + u32 opcode = 0; + + opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) | + (dst_type << DMAE_COMMAND_DST_SHIFT)); + + opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET); + + opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0); + opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) | + (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT)); + opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT); + +#ifdef __BIG_ENDIAN + opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP; +#else + opcode |= DMAE_CMD_ENDIANITY_DW_SWAP; +#endif + if (with_comp) + opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type); + return opcode; +} + +void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, + struct dmae_command *dmae, + u8 src_type, u8 dst_type) +{ + memset(dmae, 0, sizeof(struct dmae_command)); + + /* set the opcode */ + dmae->opcode = bnx2x_dmae_opcode(bp, src_type, dst_type, + true, DMAE_COMP_PCI); + + /* fill in the completion parameters */ + dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp)); + dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp)); + dmae->comp_val = DMAE_COMP_VAL; +} + +/* issue a dmae command over the init-channel and wait for completion */ +int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u32 *comp) +{ + int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000; + int rc = 0; + + bnx2x_dp_dmae(bp, dmae, BNX2X_MSG_DMAE); + + /* Lock the dmae channel. Disable BHs to prevent a dead-lock + * as long as this code is called both from syscall context and + * from ndo_set_rx_mode() flow that may be called from BH. + */ + + spin_lock_bh(&bp->dmae_lock); + + /* reset completion */ + *comp = 0; + + /* post the command on the channel used for initializations */ + bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); + + /* wait for completion */ + udelay(5); + while ((*comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) { + + if (!cnt || + (bp->recovery_state != BNX2X_RECOVERY_DONE && + bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) { + BNX2X_ERR("DMAE timeout!\n"); + rc = DMAE_TIMEOUT; + goto unlock; + } + cnt--; + udelay(50); + } + if (*comp & DMAE_PCI_ERR_FLAG) { + BNX2X_ERR("DMAE PCI error!\n"); + rc = DMAE_PCI_ERROR; + } + +unlock: + + spin_unlock_bh(&bp->dmae_lock); + + return rc; +} + +void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, + u32 len32) +{ + int rc; + struct dmae_command dmae; + + if (!bp->dmae_ready) { + u32 *data = bnx2x_sp(bp, wb_data[0]); + + if (CHIP_IS_E1(bp)) + bnx2x_init_ind_wr(bp, dst_addr, data, len32); + else + bnx2x_init_str_wr(bp, dst_addr, data, len32); + return; + } + + /* set opcode and fixed command fields */ + bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC); + + /* fill in addresses and len */ + dmae.src_addr_lo = U64_LO(dma_addr); + dmae.src_addr_hi = U64_HI(dma_addr); + dmae.dst_addr_lo = dst_addr >> 2; + dmae.dst_addr_hi = 0; + dmae.len = len32; + + /* issue the command and wait for completion */ + rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); + if (rc) { + BNX2X_ERR("DMAE returned failure %d\n", rc); +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#endif + } +} + +void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) +{ + int rc; + struct dmae_command dmae; + + if (!bp->dmae_ready) { + u32 *data = bnx2x_sp(bp, wb_data[0]); + int i; + + if (CHIP_IS_E1(bp)) + for (i = 0; i < len32; i++) + data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4); + else + for (i = 0; i < len32; i++) + data[i] = REG_RD(bp, src_addr + i*4); + + return; + } + + /* set opcode and fixed command fields */ + bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI); + + /* fill in addresses and len */ + dmae.src_addr_lo = src_addr >> 2; + dmae.src_addr_hi = 0; + dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data)); + dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data)); + dmae.len = len32; + + /* issue the command and wait for completion */ + rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); + if (rc) { + BNX2X_ERR("DMAE returned failure %d\n", rc); +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#endif + } +} + +static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr, + u32 addr, u32 len) +{ + int dmae_wr_max = DMAE_LEN32_WR_MAX(bp); + int offset = 0; + + while (len > dmae_wr_max) { + bnx2x_write_dmae(bp, phys_addr + offset, + addr + offset, dmae_wr_max); + offset += dmae_wr_max * 4; + len -= dmae_wr_max; + } + + bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len); +} + +enum storms { + XSTORM, + TSTORM, + CSTORM, + USTORM, + MAX_STORMS +}; + +#define STORMS_NUM 4 +#define REGS_IN_ENTRY 4 + +static inline int bnx2x_get_assert_list_entry(struct bnx2x *bp, + enum storms storm, + int entry) +{ + switch (storm) { + case XSTORM: + return XSTORM_ASSERT_LIST_OFFSET(entry); + case TSTORM: + return TSTORM_ASSERT_LIST_OFFSET(entry); + case CSTORM: + return CSTORM_ASSERT_LIST_OFFSET(entry); + case USTORM: + return USTORM_ASSERT_LIST_OFFSET(entry); + case MAX_STORMS: + default: + BNX2X_ERR("unknown storm\n"); + } + return -EINVAL; +} + +static int bnx2x_mc_assert(struct bnx2x *bp) +{ + char last_idx; + int i, j, rc = 0; + enum storms storm; + u32 regs[REGS_IN_ENTRY]; + u32 bar_storm_intmem[STORMS_NUM] = { + BAR_XSTRORM_INTMEM, + BAR_TSTRORM_INTMEM, + BAR_CSTRORM_INTMEM, + BAR_USTRORM_INTMEM + }; + u32 storm_assert_list_index[STORMS_NUM] = { + XSTORM_ASSERT_LIST_INDEX_OFFSET, + TSTORM_ASSERT_LIST_INDEX_OFFSET, + CSTORM_ASSERT_LIST_INDEX_OFFSET, + USTORM_ASSERT_LIST_INDEX_OFFSET + }; + char *storms_string[STORMS_NUM] = { + "XSTORM", + "TSTORM", + "CSTORM", + "USTORM" + }; + + for (storm = XSTORM; storm < MAX_STORMS; storm++) { + last_idx = REG_RD8(bp, bar_storm_intmem[storm] + + storm_assert_list_index[storm]); + if (last_idx) + BNX2X_ERR("%s_ASSERT_LIST_INDEX 0x%x\n", + storms_string[storm], last_idx); + + /* print the asserts */ + for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) { + /* read a single assert entry */ + for (j = 0; j < REGS_IN_ENTRY; j++) + regs[j] = REG_RD(bp, bar_storm_intmem[storm] + + bnx2x_get_assert_list_entry(bp, + storm, + i) + + sizeof(u32) * j); + + /* log entry if it contains a valid assert */ + if (regs[0] != COMMON_ASM_INVALID_ASSERT_OPCODE) { + BNX2X_ERR("%s_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n", + storms_string[storm], i, regs[3], + regs[2], regs[1], regs[0]); + rc++; + } else { + break; + } + } + } + + BNX2X_ERR("Chip Revision: %s, FW Version: %d_%d_%d\n", + CHIP_IS_E1(bp) ? "everest1" : + CHIP_IS_E1H(bp) ? "everest1h" : + CHIP_IS_E2(bp) ? "everest2" : "everest3", + BCM_5710_FW_MAJOR_VERSION, + BCM_5710_FW_MINOR_VERSION, + BCM_5710_FW_REVISION_VERSION); + + return rc; +} + +#define MCPR_TRACE_BUFFER_SIZE (0x800) +#define SCRATCH_BUFFER_SIZE(bp) \ + (CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000)) + +void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) +{ + u32 addr, val; + u32 mark, offset; + __be32 data[9]; + int word; + u32 trace_shmem_base; + if (BP_NOMCP(bp)) { + BNX2X_ERR("NO MCP - can not dump\n"); + return; + } + netdev_printk(lvl, bp->dev, "bc %d.%d.%d\n", + (bp->common.bc_ver & 0xff0000) >> 16, + (bp->common.bc_ver & 0xff00) >> 8, + (bp->common.bc_ver & 0xff)); + + val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER); + if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER)) + BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl, val); + + if (BP_PATH(bp) == 0) + trace_shmem_base = bp->common.shmem_base; + else + trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr); + + /* sanity */ + if (trace_shmem_base < MCPR_SCRATCH_BASE(bp) + MCPR_TRACE_BUFFER_SIZE || + trace_shmem_base >= MCPR_SCRATCH_BASE(bp) + + SCRATCH_BUFFER_SIZE(bp)) { + BNX2X_ERR("Unable to dump trace buffer (mark %x)\n", + trace_shmem_base); + return; + } + + addr = trace_shmem_base - MCPR_TRACE_BUFFER_SIZE; + + /* validate TRCB signature */ + mark = REG_RD(bp, addr); + if (mark != MFW_TRACE_SIGNATURE) { + BNX2X_ERR("Trace buffer signature is missing."); + return ; + } + + /* read cyclic buffer pointer */ + addr += 4; + mark = REG_RD(bp, addr); + mark = MCPR_SCRATCH_BASE(bp) + ((mark + 0x3) & ~0x3) - 0x08000000; + if (mark >= trace_shmem_base || mark < addr + 4) { + BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n"); + return; + } + printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark); + + printk("%s", lvl); + + /* dump buffer after the mark */ + for (offset = mark; offset < trace_shmem_base; offset += 0x8*4) { + for (word = 0; word < 8; word++) + data[word] = htonl(REG_RD(bp, offset + 4*word)); + data[8] = 0x0; + pr_cont("%s", (char *)data); + } + + /* dump buffer before the mark */ + for (offset = addr + 4; offset <= mark; offset += 0x8*4) { + for (word = 0; word < 8; word++) + data[word] = htonl(REG_RD(bp, offset + 4*word)); + data[8] = 0x0; + pr_cont("%s", (char *)data); + } + printk("%s" "end of fw dump\n", lvl); +} + +static void bnx2x_fw_dump(struct bnx2x *bp) +{ + bnx2x_fw_dump_lvl(bp, KERN_ERR); +} + +static void bnx2x_hc_int_disable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; + u32 val = REG_RD(bp, addr); + + /* in E1 we must use only PCI configuration space to disable + * MSI/MSIX capability + * It's forbidden to disable IGU_PF_CONF_MSI_MSIX_EN in HC block + */ + if (CHIP_IS_E1(bp)) { + /* Since IGU_PF_CONF_MSI_MSIX_EN still always on + * Use mask register to prevent from HC sending interrupts + * after we exit the function + */ + REG_WR(bp, HC_REG_INT_MASK + port*4, 0); + + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + } else + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + + DP(NETIF_MSG_IFDOWN, + "write %x to HC %d (addr 0x%x)\n", + val, port, addr); + + /* flush all outstanding writes */ + mmiowb(); + + REG_WR(bp, addr, val); + if (REG_RD(bp, addr) != val) + BNX2X_ERR("BUG! Proper val not read from IGU!\n"); +} + +static void bnx2x_igu_int_disable(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); + + val &= ~(IGU_PF_CONF_MSI_MSIX_EN | + IGU_PF_CONF_INT_LINE_EN | + IGU_PF_CONF_ATTN_BIT_EN); + + DP(NETIF_MSG_IFDOWN, "write %x to IGU\n", val); + + /* flush all outstanding writes */ + mmiowb(); + + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val) + BNX2X_ERR("BUG! Proper val not read from IGU!\n"); +} + +static void bnx2x_int_disable(struct bnx2x *bp) +{ + if (bp->common.int_block == INT_BLOCK_HC) + bnx2x_hc_int_disable(bp); + else + bnx2x_igu_int_disable(bp); +} + +void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int) +{ + int i; + u16 j; + struct hc_sp_status_block_data sp_sb_data; + int func = BP_FUNC(bp); +#ifdef BNX2X_STOP_ON_ERROR + u16 start = 0, end = 0; + u8 cos; +#endif + if (IS_PF(bp) && disable_int) + bnx2x_int_disable(bp); + + bp->stats_state = STATS_STATE_DISABLED; + bp->eth_stats.unrecoverable_error++; + DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n"); + + BNX2X_ERR("begin crash dump -----------------\n"); + + /* Indices */ + /* Common */ + if (IS_PF(bp)) { + struct host_sp_status_block *def_sb = bp->def_status_blk; + int data_size, cstorm_offset; + + BNX2X_ERR("def_idx(0x%x) def_att_idx(0x%x) attn_state(0x%x) spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n", + bp->def_idx, bp->def_att_idx, bp->attn_state, + bp->spq_prod_idx, bp->stats_counter); + BNX2X_ERR("DSB: attn bits(0x%x) ack(0x%x) id(0x%x) idx(0x%x)\n", + def_sb->atten_status_block.attn_bits, + def_sb->atten_status_block.attn_bits_ack, + def_sb->atten_status_block.status_block_id, + def_sb->atten_status_block.attn_bits_index); + BNX2X_ERR(" def ("); + for (i = 0; i < HC_SP_SB_MAX_INDICES; i++) + pr_cont("0x%x%s", + def_sb->sp_sb.index_values[i], + (i == HC_SP_SB_MAX_INDICES - 1) ? ") " : " "); + + data_size = sizeof(struct hc_sp_status_block_data) / + sizeof(u32); + cstorm_offset = CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func); + for (i = 0; i < data_size; i++) + *((u32 *)&sp_sb_data + i) = + REG_RD(bp, BAR_CSTRORM_INTMEM + cstorm_offset + + i * sizeof(u32)); + + pr_cont("igu_sb_id(0x%x) igu_seg_id(0x%x) pf_id(0x%x) vnic_id(0x%x) vf_id(0x%x) vf_valid (0x%x) state(0x%x)\n", + sp_sb_data.igu_sb_id, + sp_sb_data.igu_seg_id, + sp_sb_data.p_func.pf_id, + sp_sb_data.p_func.vnic_id, + sp_sb_data.p_func.vf_id, + sp_sb_data.p_func.vf_valid, + sp_sb_data.state); + } + + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + int loop; + struct hc_status_block_data_e2 sb_data_e2; + struct hc_status_block_data_e1x sb_data_e1x; + struct hc_status_block_sm *hc_sm_p = + CHIP_IS_E1x(bp) ? + sb_data_e1x.common.state_machine : + sb_data_e2.common.state_machine; + struct hc_index_data *hc_index_p = + CHIP_IS_E1x(bp) ? + sb_data_e1x.index_data : + sb_data_e2.index_data; + u8 data_size, cos; + u32 *sb_data_p; + struct bnx2x_fp_txdata txdata; + + if (!bp->fp) + break; + + if (!fp->rx_cons_sb) + continue; + + /* Rx */ + BNX2X_ERR("fp%d: rx_bd_prod(0x%x) rx_bd_cons(0x%x) rx_comp_prod(0x%x) rx_comp_cons(0x%x) *rx_cons_sb(0x%x)\n", + i, fp->rx_bd_prod, fp->rx_bd_cons, + fp->rx_comp_prod, + fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb)); + BNX2X_ERR(" rx_sge_prod(0x%x) last_max_sge(0x%x) fp_hc_idx(0x%x)\n", + fp->rx_sge_prod, fp->last_max_sge, + le16_to_cpu(fp->fp_hc_idx)); + + /* Tx */ + for_each_cos_in_tx_queue(fp, cos) + { + if (!fp->txdata_ptr[cos]) + break; + + txdata = *fp->txdata_ptr[cos]; + + if (!txdata.tx_cons_sb) + continue; + + BNX2X_ERR("fp%d: tx_pkt_prod(0x%x) tx_pkt_cons(0x%x) tx_bd_prod(0x%x) tx_bd_cons(0x%x) *tx_cons_sb(0x%x)\n", + i, txdata.tx_pkt_prod, + txdata.tx_pkt_cons, txdata.tx_bd_prod, + txdata.tx_bd_cons, + le16_to_cpu(*txdata.tx_cons_sb)); + } + + loop = CHIP_IS_E1x(bp) ? + HC_SB_MAX_INDICES_E1X : HC_SB_MAX_INDICES_E2; + + /* host sb data */ + + if (IS_FCOE_FP(fp)) + continue; + + BNX2X_ERR(" run indexes ("); + for (j = 0; j < HC_SB_MAX_SM; j++) + pr_cont("0x%x%s", + fp->sb_running_index[j], + (j == HC_SB_MAX_SM - 1) ? ")" : " "); + + BNX2X_ERR(" indexes ("); + for (j = 0; j < loop; j++) + pr_cont("0x%x%s", + fp->sb_index_values[j], + (j == loop - 1) ? ")" : " "); + + /* VF cannot access FW refelection for status block */ + if (IS_VF(bp)) + continue; + + /* fw sb data */ + data_size = CHIP_IS_E1x(bp) ? + sizeof(struct hc_status_block_data_e1x) : + sizeof(struct hc_status_block_data_e2); + data_size /= sizeof(u32); + sb_data_p = CHIP_IS_E1x(bp) ? + (u32 *)&sb_data_e1x : + (u32 *)&sb_data_e2; + /* copy sb data in here */ + for (j = 0; j < data_size; j++) + *(sb_data_p + j) = REG_RD(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_OFFSET(fp->fw_sb_id) + + j * sizeof(u32)); + + if (!CHIP_IS_E1x(bp)) { + pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n", + sb_data_e2.common.p_func.pf_id, + sb_data_e2.common.p_func.vf_id, + sb_data_e2.common.p_func.vf_valid, + sb_data_e2.common.p_func.vnic_id, + sb_data_e2.common.same_igu_sb_1b, + sb_data_e2.common.state); + } else { + pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n", + sb_data_e1x.common.p_func.pf_id, + sb_data_e1x.common.p_func.vf_id, + sb_data_e1x.common.p_func.vf_valid, + sb_data_e1x.common.p_func.vnic_id, + sb_data_e1x.common.same_igu_sb_1b, + sb_data_e1x.common.state); + } + + /* SB_SMs data */ + for (j = 0; j < HC_SB_MAX_SM; j++) { + pr_cont("SM[%d] __flags (0x%x) igu_sb_id (0x%x) igu_seg_id(0x%x) time_to_expire (0x%x) timer_value(0x%x)\n", + j, hc_sm_p[j].__flags, + hc_sm_p[j].igu_sb_id, + hc_sm_p[j].igu_seg_id, + hc_sm_p[j].time_to_expire, + hc_sm_p[j].timer_value); + } + + /* Indices data */ + for (j = 0; j < loop; j++) { + pr_cont("INDEX[%d] flags (0x%x) timeout (0x%x)\n", j, + hc_index_p[j].flags, + hc_index_p[j].timeout); + } + } + +#ifdef BNX2X_STOP_ON_ERROR + if (IS_PF(bp)) { + /* event queue */ + BNX2X_ERR("eq cons %x prod %x\n", bp->eq_cons, bp->eq_prod); + for (i = 0; i < NUM_EQ_DESC; i++) { + u32 *data = (u32 *)&bp->eq_ring[i].message.data; + + BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n", + i, bp->eq_ring[i].message.opcode, + bp->eq_ring[i].message.error); + BNX2X_ERR("data: %x %x %x\n", + data[0], data[1], data[2]); + } + } + + /* Rings */ + /* Rx */ + for_each_valid_rx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + if (!bp->fp) + break; + + if (!fp->rx_cons_sb) + continue; + + start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10); + end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503); + for (j = start; j != end; j = RX_BD(j + 1)) { + u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j]; + struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j]; + + BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n", + i, j, rx_bd[1], rx_bd[0], sw_bd->data); + } + + start = RX_SGE(fp->rx_sge_prod); + end = RX_SGE(fp->last_max_sge); + for (j = start; j != end; j = RX_SGE(j + 1)) { + u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j]; + struct sw_rx_page *sw_page = &fp->rx_page_ring[j]; + + BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n", + i, j, rx_sge[1], rx_sge[0], sw_page->page); + } + + start = RCQ_BD(fp->rx_comp_cons - 10); + end = RCQ_BD(fp->rx_comp_cons + 503); + for (j = start; j != end; j = RCQ_BD(j + 1)) { + u32 *cqe = (u32 *)&fp->rx_comp_ring[j]; + + BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n", + i, j, cqe[0], cqe[1], cqe[2], cqe[3]); + } + } + + /* Tx */ + for_each_valid_tx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + if (!bp->fp) + break; + + for_each_cos_in_tx_queue(fp, cos) { + struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos]; + + if (!fp->txdata_ptr[cos]) + break; + + if (!txdata->tx_cons_sb) + continue; + + start = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) - 10); + end = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) + 245); + for (j = start; j != end; j = TX_BD(j + 1)) { + struct sw_tx_bd *sw_bd = + &txdata->tx_buf_ring[j]; + + BNX2X_ERR("fp%d: txdata %d, packet[%x]=[%p,%x]\n", + i, cos, j, sw_bd->skb, + sw_bd->first_bd); + } + + start = TX_BD(txdata->tx_bd_cons - 10); + end = TX_BD(txdata->tx_bd_cons + 254); + for (j = start; j != end; j = TX_BD(j + 1)) { + u32 *tx_bd = (u32 *)&txdata->tx_desc_ring[j]; + + BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]=[%x:%x:%x:%x]\n", + i, cos, j, tx_bd[0], tx_bd[1], + tx_bd[2], tx_bd[3]); + } + } + } +#endif + if (IS_PF(bp)) { + bnx2x_fw_dump(bp); + bnx2x_mc_assert(bp); + } + BNX2X_ERR("end crash dump -----------------\n"); +} + +/* + * FLR Support for E2 + * + * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW + * initialization. + */ +#define FLR_WAIT_USEC 10000 /* 10 milliseconds */ +#define FLR_WAIT_INTERVAL 50 /* usec */ +#define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERVAL) /* 200 */ + +struct pbf_pN_buf_regs { + int pN; + u32 init_crd; + u32 crd; + u32 crd_freed; +}; + +struct pbf_pN_cmd_regs { + int pN; + u32 lines_occup; + u32 lines_freed; +}; + +static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp, + struct pbf_pN_buf_regs *regs, + u32 poll_count) +{ + u32 init_crd, crd, crd_start, crd_freed, crd_freed_start; + u32 cur_cnt = poll_count; + + crd_freed = crd_freed_start = REG_RD(bp, regs->crd_freed); + crd = crd_start = REG_RD(bp, regs->crd); + init_crd = REG_RD(bp, regs->init_crd); + + DP(BNX2X_MSG_SP, "INIT CREDIT[%d] : %x\n", regs->pN, init_crd); + DP(BNX2X_MSG_SP, "CREDIT[%d] : s:%x\n", regs->pN, crd); + DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: s:%x\n", regs->pN, crd_freed); + + while ((crd != init_crd) && ((u32)SUB_S32(crd_freed, crd_freed_start) < + (init_crd - crd_start))) { + if (cur_cnt--) { + udelay(FLR_WAIT_INTERVAL); + crd = REG_RD(bp, regs->crd); + crd_freed = REG_RD(bp, regs->crd_freed); + } else { + DP(BNX2X_MSG_SP, "PBF tx buffer[%d] timed out\n", + regs->pN); + DP(BNX2X_MSG_SP, "CREDIT[%d] : c:%x\n", + regs->pN, crd); + DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: c:%x\n", + regs->pN, crd_freed); + break; + } + } + DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF tx buffer[%d]\n", + poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN); +} + +static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp, + struct pbf_pN_cmd_regs *regs, + u32 poll_count) +{ + u32 occup, to_free, freed, freed_start; + u32 cur_cnt = poll_count; + + occup = to_free = REG_RD(bp, regs->lines_occup); + freed = freed_start = REG_RD(bp, regs->lines_freed); + + DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", regs->pN, occup); + DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", regs->pN, freed); + + while (occup && ((u32)SUB_S32(freed, freed_start) < to_free)) { + if (cur_cnt--) { + udelay(FLR_WAIT_INTERVAL); + occup = REG_RD(bp, regs->lines_occup); + freed = REG_RD(bp, regs->lines_freed); + } else { + DP(BNX2X_MSG_SP, "PBF cmd queue[%d] timed out\n", + regs->pN); + DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", + regs->pN, occup); + DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", + regs->pN, freed); + break; + } + } + DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF cmd queue[%d]\n", + poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN); +} + +static u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg, + u32 expected, u32 poll_count) +{ + u32 cur_cnt = poll_count; + u32 val; + + while ((val = REG_RD(bp, reg)) != expected && cur_cnt--) + udelay(FLR_WAIT_INTERVAL); + + return val; +} + +int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, + char *msg, u32 poll_cnt) +{ + u32 val = bnx2x_flr_clnup_reg_poll(bp, reg, 0, poll_cnt); + if (val != 0) { + BNX2X_ERR("%s usage count=%d\n", msg, val); + return 1; + } + return 0; +} + +/* Common routines with VF FLR cleanup */ +u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp) +{ + /* adjust polling timeout */ + if (CHIP_REV_IS_EMUL(bp)) + return FLR_POLL_CNT * 2000; + + if (CHIP_REV_IS_FPGA(bp)) + return FLR_POLL_CNT * 120; + + return FLR_POLL_CNT; +} + +void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count) +{ + struct pbf_pN_cmd_regs cmd_regs[] = { + {0, (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_OCCUPANCY_Q0 : + PBF_REG_P0_TQ_OCCUPANCY, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_LINES_FREED_CNT_Q0 : + PBF_REG_P0_TQ_LINES_FREED_CNT}, + {1, (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_OCCUPANCY_Q1 : + PBF_REG_P1_TQ_OCCUPANCY, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_LINES_FREED_CNT_Q1 : + PBF_REG_P1_TQ_LINES_FREED_CNT}, + {4, (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_OCCUPANCY_LB_Q : + PBF_REG_P4_TQ_OCCUPANCY, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_LINES_FREED_CNT_LB_Q : + PBF_REG_P4_TQ_LINES_FREED_CNT} + }; + + struct pbf_pN_buf_regs buf_regs[] = { + {0, (CHIP_IS_E3B0(bp)) ? + PBF_REG_INIT_CRD_Q0 : + PBF_REG_P0_INIT_CRD , + (CHIP_IS_E3B0(bp)) ? + PBF_REG_CREDIT_Q0 : + PBF_REG_P0_CREDIT, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 : + PBF_REG_P0_INTERNAL_CRD_FREED_CNT}, + {1, (CHIP_IS_E3B0(bp)) ? + PBF_REG_INIT_CRD_Q1 : + PBF_REG_P1_INIT_CRD, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_CREDIT_Q1 : + PBF_REG_P1_CREDIT, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 : + PBF_REG_P1_INTERNAL_CRD_FREED_CNT}, + {4, (CHIP_IS_E3B0(bp)) ? + PBF_REG_INIT_CRD_LB_Q : + PBF_REG_P4_INIT_CRD, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_CREDIT_LB_Q : + PBF_REG_P4_CREDIT, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q : + PBF_REG_P4_INTERNAL_CRD_FREED_CNT}, + }; + + int i; + + /* Verify the command queues are flushed P0, P1, P4 */ + for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) + bnx2x_pbf_pN_cmd_flushed(bp, &cmd_regs[i], poll_count); + + /* Verify the transmission buffers are flushed P0, P1, P4 */ + for (i = 0; i < ARRAY_SIZE(buf_regs); i++) + bnx2x_pbf_pN_buf_flushed(bp, &buf_regs[i], poll_count); +} + +#define OP_GEN_PARAM(param) \ + (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM) + +#define OP_GEN_TYPE(type) \ + (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE) + +#define OP_GEN_AGG_VECT(index) \ + (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX) + +int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt) +{ + u32 op_gen_command = 0; + u32 comp_addr = BAR_CSTRORM_INTMEM + + CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func); + int ret = 0; + + if (REG_RD(bp, comp_addr)) { + BNX2X_ERR("Cleanup complete was not 0 before sending\n"); + return 1; + } + + op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX); + op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE); + op_gen_command |= OP_GEN_AGG_VECT(clnup_func); + op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT; + + DP(BNX2X_MSG_SP, "sending FW Final cleanup\n"); + REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen_command); + + if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) { + BNX2X_ERR("FW final cleanup did not succeed\n"); + DP(BNX2X_MSG_SP, "At timeout completion address contained %x\n", + (REG_RD(bp, comp_addr))); + bnx2x_panic(); + return 1; + } + /* Zero completion for next FLR */ + REG_WR(bp, comp_addr, 0); + + return ret; +} + +u8 bnx2x_is_pcie_pending(struct pci_dev *dev) +{ + u16 status; + + pcie_capability_read_word(dev, PCI_EXP_DEVSTA, &status); + return status & PCI_EXP_DEVSTA_TRPND; +} + +/* PF FLR specific routines +*/ +static int bnx2x_poll_hw_usage_counters(struct bnx2x *bp, u32 poll_cnt) +{ + /* wait for CFC PF usage-counter to zero (includes all the VFs) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + CFC_REG_NUM_LCIDS_INSIDE_PF, + "CFC PF usage counter timed out", + poll_cnt)) + return 1; + + /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + DORQ_REG_PF_USAGE_CNT, + "DQ PF usage counter timed out", + poll_cnt)) + return 1; + + /* Wait for QM PF usage-counter to zero (until DQ cleanup) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + QM_REG_PF_USG_CNT_0 + 4*BP_FUNC(bp), + "QM PF usage counter timed out", + poll_cnt)) + return 1; + + /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + TM_REG_LIN0_VNIC_UC + 4*BP_PORT(bp), + "Timers VNIC usage counter timed out", + poll_cnt)) + return 1; + if (bnx2x_flr_clnup_poll_hw_counter(bp, + TM_REG_LIN0_NUM_SCANS + 4*BP_PORT(bp), + "Timers NUM_SCANS usage counter timed out", + poll_cnt)) + return 1; + + /* Wait DMAE PF usage counter to zero */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + dmae_reg_go_c[INIT_DMAE_C(bp)], + "DMAE command register timed out", + poll_cnt)) + return 1; + + return 0; +} + +static void bnx2x_hw_enable_status(struct bnx2x *bp) +{ + u32 val; + + val = REG_RD(bp, CFC_REG_WEAK_ENABLE_PF); + DP(BNX2X_MSG_SP, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val); + + val = REG_RD(bp, PBF_REG_DISABLE_PF); + DP(BNX2X_MSG_SP, "PBF_REG_DISABLE_PF is 0x%x\n", val); + + val = REG_RD(bp, IGU_REG_PCI_PF_MSI_EN); + DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val); + + val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_EN); + DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val); + + val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_FUNC_MASK); + DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val); + + val = REG_RD(bp, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR); + DP(BNX2X_MSG_SP, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val); + + val = REG_RD(bp, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR); + DP(BNX2X_MSG_SP, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val); + + val = REG_RD(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER); + DP(BNX2X_MSG_SP, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n", + val); +} + +static int bnx2x_pf_flr_clnup(struct bnx2x *bp) +{ + u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp); + + DP(BNX2X_MSG_SP, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp)); + + /* Re-enable PF target read access */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); + + /* Poll HW usage counters */ + DP(BNX2X_MSG_SP, "Polling usage counters\n"); + if (bnx2x_poll_hw_usage_counters(bp, poll_cnt)) + return -EBUSY; + + /* Zero the igu 'trailing edge' and 'leading edge' */ + + /* Send the FW cleanup command */ + if (bnx2x_send_final_clnup(bp, (u8)BP_FUNC(bp), poll_cnt)) + return -EBUSY; + + /* ATC cleanup */ + + /* Verify TX hw is flushed */ + bnx2x_tx_hw_flushed(bp, poll_cnt); + + /* Wait 100ms (not adjusted according to platform) */ + msleep(100); + + /* Verify no pending pci transactions */ + if (bnx2x_is_pcie_pending(bp->pdev)) + BNX2X_ERR("PCIE Transactions still pending\n"); + + /* Debug */ + bnx2x_hw_enable_status(bp); + + /* + * Master enable - Due to WB DMAE writes performed before this + * register is re-initialized as part of the regular function init + */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); + + return 0; +} + +static void bnx2x_hc_int_enable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; + u32 val = REG_RD(bp, addr); + bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false; + bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false; + bool msi = (bp->flags & USING_MSI_FLAG) ? true : false; + + if (msix) { + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0); + val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + if (single_msix) + val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0; + } else if (msi) { + val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0; + val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + } else { + val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + + if (!CHIP_IS_E1(bp)) { + DP(NETIF_MSG_IFUP, + "write %x to HC %d (addr 0x%x)\n", val, port, addr); + + REG_WR(bp, addr, val); + + val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0; + } + } + + if (CHIP_IS_E1(bp)) + REG_WR(bp, HC_REG_INT_MASK + port*4, 0x1FFFF); + + DP(NETIF_MSG_IFUP, + "write %x to HC %d (addr 0x%x) mode %s\n", val, port, addr, + (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); + + REG_WR(bp, addr, val); + /* + * Ensure that HC_CONFIG is written before leading/trailing edge config + */ + mmiowb(); + barrier(); + + if (!CHIP_IS_E1(bp)) { + /* init leading/trailing edge */ + if (IS_MF(bp)) { + val = (0xee0f | (1 << (BP_VN(bp) + 4))); + if (bp->port.pmf) + /* enable nig and gpio3 attention */ + val |= 0x1100; + } else + val = 0xffff; + + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); + } + + /* Make sure that interrupts are indeed enabled from here on */ + mmiowb(); +} + +static void bnx2x_igu_int_enable(struct bnx2x *bp) +{ + u32 val; + bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false; + bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false; + bool msi = (bp->flags & USING_MSI_FLAG) ? true : false; + + val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); + + if (msix) { + val &= ~(IGU_PF_CONF_INT_LINE_EN | + IGU_PF_CONF_SINGLE_ISR_EN); + val |= (IGU_PF_CONF_MSI_MSIX_EN | + IGU_PF_CONF_ATTN_BIT_EN); + + if (single_msix) + val |= IGU_PF_CONF_SINGLE_ISR_EN; + } else if (msi) { + val &= ~IGU_PF_CONF_INT_LINE_EN; + val |= (IGU_PF_CONF_MSI_MSIX_EN | + IGU_PF_CONF_ATTN_BIT_EN | + IGU_PF_CONF_SINGLE_ISR_EN); + } else { + val &= ~IGU_PF_CONF_MSI_MSIX_EN; + val |= (IGU_PF_CONF_INT_LINE_EN | + IGU_PF_CONF_ATTN_BIT_EN | + IGU_PF_CONF_SINGLE_ISR_EN); + } + + /* Clean previous status - need to configure igu prior to ack*/ + if ((!msix) || single_msix) { + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + bnx2x_ack_int(bp); + } + + val |= IGU_PF_CONF_FUNC_EN; + + DP(NETIF_MSG_IFUP, "write 0x%x to IGU mode %s\n", + val, (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); + + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + + if (val & IGU_PF_CONF_INT_LINE_EN) + pci_intx(bp->pdev, true); + + barrier(); + + /* init leading/trailing edge */ + if (IS_MF(bp)) { + val = (0xee0f | (1 << (BP_VN(bp) + 4))); + if (bp->port.pmf) + /* enable nig and gpio3 attention */ + val |= 0x1100; + } else + val = 0xffff; + + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val); + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val); + + /* Make sure that interrupts are indeed enabled from here on */ + mmiowb(); +} + +void bnx2x_int_enable(struct bnx2x *bp) +{ + if (bp->common.int_block == INT_BLOCK_HC) + bnx2x_hc_int_enable(bp); + else + bnx2x_igu_int_enable(bp); +} + +void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw) +{ + int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; + int i, offset; + + if (disable_hw) + /* prevent the HW from sending interrupts */ + bnx2x_int_disable(bp); + + /* make sure all ISRs are done */ + if (msix) { + synchronize_irq(bp->msix_table[0].vector); + offset = 1; + if (CNIC_SUPPORT(bp)) + offset++; + for_each_eth_queue(bp, i) + synchronize_irq(bp->msix_table[offset++].vector); + } else + synchronize_irq(bp->pdev->irq); + + /* make sure sp_task is not running */ + cancel_delayed_work(&bp->sp_task); + cancel_delayed_work(&bp->period_task); + flush_workqueue(bnx2x_wq); +} + +/* fast path */ + +/* + * General service functions + */ + +/* Return true if succeeded to acquire the lock */ +static bool bnx2x_trylock_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + int func = BP_FUNC(bp); + u32 hw_lock_control_reg; + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, + "Trying to take a lock on resource %d\n", resource); + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return false; + } + + if (func <= 5) + hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); + else + hw_lock_control_reg = + (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); + + /* Try to acquire the lock */ + REG_WR(bp, hw_lock_control_reg + 4, resource_bit); + lock_status = REG_RD(bp, hw_lock_control_reg); + if (lock_status & resource_bit) + return true; + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, + "Failed to get a lock on resource %d\n", resource); + return false; +} + +/** + * bnx2x_get_leader_lock_resource - get the recovery leader resource id + * + * @bp: driver handle + * + * Returns the recovery leader resource id according to the engine this function + * belongs to. Currently only only 2 engines is supported. + */ +static int bnx2x_get_leader_lock_resource(struct bnx2x *bp) +{ + if (BP_PATH(bp)) + return HW_LOCK_RESOURCE_RECOVERY_LEADER_1; + else + return HW_LOCK_RESOURCE_RECOVERY_LEADER_0; +} + +/** + * bnx2x_trylock_leader_lock- try to acquire a leader lock. + * + * @bp: driver handle + * + * Tries to acquire a leader lock for current engine. + */ +static bool bnx2x_trylock_leader_lock(struct bnx2x *bp) +{ + return bnx2x_trylock_hw_lock(bp, bnx2x_get_leader_lock_resource(bp)); +} + +static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err); + +/* schedule the sp task and mark that interrupt occurred (runs from ISR) */ +static int bnx2x_schedule_sp_task(struct bnx2x *bp) +{ + /* Set the interrupt occurred bit for the sp-task to recognize it + * must ack the interrupt and transition according to the IGU + * state machine. + */ + atomic_set(&bp->interrupt_occurred, 1); + + /* The sp_task must execute only after this bit + * is set, otherwise we will get out of sync and miss all + * further interrupts. Hence, the barrier. + */ + smp_wmb(); + + /* schedule sp_task to workqueue */ + return queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); +} + +void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) +{ + struct bnx2x *bp = fp->bp; + int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data); + int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data); + enum bnx2x_queue_cmd drv_cmd = BNX2X_Q_CMD_MAX; + struct bnx2x_queue_sp_obj *q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + + DP(BNX2X_MSG_SP, + "fp %d cid %d got ramrod #%d state is %x type is %d\n", + fp->index, cid, command, bp->state, + rr_cqe->ramrod_cqe.ramrod_type); + + /* If cid is within VF range, replace the slowpath object with the + * one corresponding to this VF + */ + if (cid >= BNX2X_FIRST_VF_CID && + cid < BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS) + bnx2x_iov_set_queue_sp_obj(bp, cid, &q_obj); + + switch (command) { + case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE): + DP(BNX2X_MSG_SP, "got UPDATE ramrod. CID %d\n", cid); + drv_cmd = BNX2X_Q_CMD_UPDATE; + break; + + case (RAMROD_CMD_ID_ETH_CLIENT_SETUP): + DP(BNX2X_MSG_SP, "got MULTI[%d] setup ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_SETUP; + break; + + case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP): + DP(BNX2X_MSG_SP, "got MULTI[%d] tx-only setup ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_SETUP_TX_ONLY; + break; + + case (RAMROD_CMD_ID_ETH_HALT): + DP(BNX2X_MSG_SP, "got MULTI[%d] halt ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_HALT; + break; + + case (RAMROD_CMD_ID_ETH_TERMINATE): + DP(BNX2X_MSG_SP, "got MULTI[%d] terminate ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_TERMINATE; + break; + + case (RAMROD_CMD_ID_ETH_EMPTY): + DP(BNX2X_MSG_SP, "got MULTI[%d] empty ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_EMPTY; + break; + + case (RAMROD_CMD_ID_ETH_TPA_UPDATE): + DP(BNX2X_MSG_SP, "got tpa update ramrod CID=%d\n", cid); + drv_cmd = BNX2X_Q_CMD_UPDATE_TPA; + break; + + default: + BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n", + command, fp->index); + return; + } + + if ((drv_cmd != BNX2X_Q_CMD_MAX) && + q_obj->complete_cmd(bp, q_obj, drv_cmd)) + /* q_obj->complete_cmd() failure means that this was + * an unexpected completion. + * + * In this case we don't want to increase the bp->spq_left + * because apparently we haven't sent this command the first + * place. + */ +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#else + return; +#endif + + smp_mb__before_atomic(); + atomic_inc(&bp->cq_spq_left); + /* push the change in bp->spq_left and towards the memory */ + smp_mb__after_atomic(); + + DP(BNX2X_MSG_SP, "bp->cq_spq_left %x\n", atomic_read(&bp->cq_spq_left)); + + if ((drv_cmd == BNX2X_Q_CMD_UPDATE) && (IS_FCOE_FP(fp)) && + (!!test_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state))) { + /* if Q update ramrod is completed for last Q in AFEX vif set + * flow, then ACK MCP at the end + * + * mark pending ACK to MCP bit. + * prevent case that both bits are cleared. + * At the end of load/unload driver checks that + * sp_state is cleared, and this order prevents + * races + */ + smp_mb__before_atomic(); + set_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, &bp->sp_state); + wmb(); + clear_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state); + smp_mb__after_atomic(); + + /* schedule the sp task as mcp ack is required */ + bnx2x_schedule_sp_task(bp); + } + + return; +} + +irqreturn_t bnx2x_interrupt(int irq, void *dev_instance) +{ + struct bnx2x *bp = netdev_priv(dev_instance); + u16 status = bnx2x_ack_int(bp); + u16 mask; + int i; + u8 cos; + + /* Return here if interrupt is shared and it's not for us */ + if (unlikely(status == 0)) { + DP(NETIF_MSG_INTR, "not our interrupt!\n"); + return IRQ_NONE; + } + DP(NETIF_MSG_INTR, "got an interrupt status 0x%x\n", status); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return IRQ_HANDLED; +#endif + + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + mask = 0x2 << (fp->index + CNIC_SUPPORT(bp)); + if (status & mask) { + /* Handle Rx or Tx according to SB id */ + for_each_cos_in_tx_queue(fp, cos) + prefetch(fp->txdata_ptr[cos]->tx_cons_sb); + prefetch(&fp->sb_running_index[SM_RX_ID]); + napi_schedule_irqoff(&bnx2x_fp(bp, fp->index, napi)); + status &= ~mask; + } + } + + if (CNIC_SUPPORT(bp)) { + mask = 0x2; + if (status & (mask | 0x1)) { + struct cnic_ops *c_ops = NULL; + + rcu_read_lock(); + c_ops = rcu_dereference(bp->cnic_ops); + if (c_ops && (bp->cnic_eth_dev.drv_state & + CNIC_DRV_STATE_HANDLES_IRQ)) + c_ops->cnic_handler(bp->cnic_data, NULL); + rcu_read_unlock(); + + status &= ~mask; + } + } + + if (unlikely(status & 0x1)) { + + /* schedule sp task to perform default status block work, ack + * attentions and enable interrupts. + */ + bnx2x_schedule_sp_task(bp); + + status &= ~0x1; + if (!status) + return IRQ_HANDLED; + } + + if (unlikely(status)) + DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n", + status); + + return IRQ_HANDLED; +} + +/* Link */ + +/* + * General service functions + */ + +int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + int func = BP_FUNC(bp); + u32 hw_lock_control_reg; + int cnt; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + if (func <= 5) { + hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); + } else { + hw_lock_control_reg = + (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); + } + + /* Validating that the resource is not already taken */ + lock_status = REG_RD(bp, hw_lock_control_reg); + if (lock_status & resource_bit) { + BNX2X_ERR("lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EEXIST; + } + + /* Try for 5 second every 5ms */ + for (cnt = 0; cnt < 1000; cnt++) { + /* Try to acquire the lock */ + REG_WR(bp, hw_lock_control_reg + 4, resource_bit); + lock_status = REG_RD(bp, hw_lock_control_reg); + if (lock_status & resource_bit) + return 0; + + usleep_range(5000, 10000); + } + BNX2X_ERR("Timeout\n"); + return -EAGAIN; +} + +int bnx2x_release_leader_lock(struct bnx2x *bp) +{ + return bnx2x_release_hw_lock(bp, bnx2x_get_leader_lock_resource(bp)); +} + +int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + int func = BP_FUNC(bp); + u32 hw_lock_control_reg; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + if (func <= 5) { + hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); + } else { + hw_lock_control_reg = + (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); + } + + /* Validating that the resource is currently taken */ + lock_status = REG_RD(bp, hw_lock_control_reg); + if (!(lock_status & resource_bit)) { + BNX2X_ERR("lock_status 0x%x resource_bit 0x%x. Unlock was called but lock wasn't taken!\n", + lock_status, resource_bit); + return -EFAULT; + } + + REG_WR(bp, hw_lock_control_reg, resource_bit); + return 0; +} + +int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + int value; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + /* read GPIO value */ + gpio_reg = REG_RD(bp, MISC_REG_GPIO); + + /* get the requested pin value */ + if ((gpio_reg & gpio_mask) == gpio_mask) + value = 1; + else + value = 0; + + return value; +} + +int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO and mask except the float bits */ + gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT); + + switch (mode) { + case MISC_REGISTERS_GPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, + "Set GPIO %d (shift %d) -> output low\n", + gpio_num, gpio_shift); + /* clear FLOAT and set CLR */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, + "Set GPIO %d (shift %d) -> output high\n", + gpio_num, gpio_shift); + /* clear FLOAT and set SET */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS); + break; + + case MISC_REGISTERS_GPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, + "Set GPIO %d (shift %d) -> input\n", + gpio_num, gpio_shift); + /* set FLOAT */ + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_GPIO, gpio_reg); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + + return 0; +} + +int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode) +{ + u32 gpio_reg = 0; + int rc = 0; + + /* Any port swapping should be handled by caller. */ + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO and mask except the float bits */ + gpio_reg = REG_RD(bp, MISC_REG_GPIO); + gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS); + gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS); + + switch (mode) { + case MISC_REGISTERS_GPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output low\n", pins); + /* set CLR */ + gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output high\n", pins); + /* set SET */ + gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS); + break; + + case MISC_REGISTERS_GPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> input\n", pins); + /* set FLOAT */ + gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS); + break; + + default: + BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode); + rc = -EINVAL; + break; + } + + if (rc == 0) + REG_WR(bp, MISC_REG_GPIO, gpio_reg); + + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + + return rc; +} + +int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO int */ + gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT); + + switch (mode) { + case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR: + DP(NETIF_MSG_LINK, + "Clear GPIO INT %d (shift %d) -> output low\n", + gpio_num, gpio_shift); + /* clear SET and set CLR */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_INT_OUTPUT_SET: + DP(NETIF_MSG_LINK, + "Set GPIO INT %d (shift %d) -> output high\n", + gpio_num, gpio_shift); + /* clear CLR and set SET */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + + return 0; +} + +static int bnx2x_set_spio(struct bnx2x *bp, int spio, u32 mode) +{ + u32 spio_reg; + + /* Only 2 SPIOs are configurable */ + if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) { + BNX2X_ERR("Invalid SPIO 0x%x\n", spio); + return -EINVAL; + } + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); + /* read SPIO and mask except the float bits */ + spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_SPIO_FLOAT); + + switch (mode) { + case MISC_SPIO_OUTPUT_LOW: + DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output low\n", spio); + /* clear FLOAT and set CLR */ + spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS); + spio_reg |= (spio << MISC_SPIO_CLR_POS); + break; + + case MISC_SPIO_OUTPUT_HIGH: + DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output high\n", spio); + /* clear FLOAT and set SET */ + spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS); + spio_reg |= (spio << MISC_SPIO_SET_POS); + break; + + case MISC_SPIO_INPUT_HI_Z: + DP(NETIF_MSG_HW, "Set SPIO 0x%x -> input\n", spio); + /* set FLOAT */ + spio_reg |= (spio << MISC_SPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_SPIO, spio_reg); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); + + return 0; +} + +void bnx2x_calc_fc_adv(struct bnx2x *bp) +{ + u8 cfg_idx = bnx2x_get_link_cfg_idx(bp); + switch (bp->link_vars.ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) { + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE: + bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + break; + + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH: + bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + break; + + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC: + bp->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause; + break; + + default: + bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + break; + } +} + +static void bnx2x_set_requested_fc(struct bnx2x *bp) +{ + /* Initialize link parameters structure variables + * It is recommended to turn off RX FC for jumbo frames + * for better performance + */ + if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000)) + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX; + else + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH; +} + +static void bnx2x_init_dropless_fc(struct bnx2x *bp) +{ + u32 pause_enabled = 0; + + if (!CHIP_IS_E1(bp) && bp->dropless_fc && bp->link_vars.link_up) { + if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) + pause_enabled = 1; + + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_ETH_PAUSE_ENABLED_OFFSET(BP_PORT(bp)), + pause_enabled); + } + + DP(NETIF_MSG_IFUP | NETIF_MSG_LINK, "dropless_fc is %s\n", + pause_enabled ? "enabled" : "disabled"); +} + +int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode) +{ + int rc, cfx_idx = bnx2x_get_link_cfg_idx(bp); + u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx]; + + if (!BP_NOMCP(bp)) { + bnx2x_set_requested_fc(bp); + bnx2x_acquire_phy_lock(bp); + + if (load_mode == LOAD_DIAG) { + struct link_params *lp = &bp->link_params; + lp->loopback_mode = LOOPBACK_XGXS; + /* do PHY loopback at 10G speed, if possible */ + if (lp->req_line_speed[cfx_idx] < SPEED_10000) { + if (lp->speed_cap_mask[cfx_idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) + lp->req_line_speed[cfx_idx] = + SPEED_10000; + else + lp->req_line_speed[cfx_idx] = + SPEED_1000; + } + } + + if (load_mode == LOAD_LOOPBACK_EXT) { + struct link_params *lp = &bp->link_params; + lp->loopback_mode = LOOPBACK_EXT; + } + + rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars); + + bnx2x_release_phy_lock(bp); + + bnx2x_init_dropless_fc(bp); + + bnx2x_calc_fc_adv(bp); + + if (bp->link_vars.link_up) { + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + bnx2x_link_report(bp); + } + queue_delayed_work(bnx2x_wq, &bp->period_task, 0); + bp->link_params.req_line_speed[cfx_idx] = req_line_speed; + return rc; + } + BNX2X_ERR("Bootcode is missing - can not initialize link\n"); + return -EINVAL; +} + +void bnx2x_link_set(struct bnx2x *bp) +{ + if (!BP_NOMCP(bp)) { + bnx2x_acquire_phy_lock(bp); + bnx2x_phy_init(&bp->link_params, &bp->link_vars); + bnx2x_release_phy_lock(bp); + + bnx2x_init_dropless_fc(bp); + + bnx2x_calc_fc_adv(bp); + } else + BNX2X_ERR("Bootcode is missing - can not set link\n"); +} + +static void bnx2x__link_reset(struct bnx2x *bp) +{ + if (!BP_NOMCP(bp)) { + bnx2x_acquire_phy_lock(bp); + bnx2x_lfa_reset(&bp->link_params, &bp->link_vars); + bnx2x_release_phy_lock(bp); + } else + BNX2X_ERR("Bootcode is missing - can not reset link\n"); +} + +void bnx2x_force_link_reset(struct bnx2x *bp) +{ + bnx2x_acquire_phy_lock(bp); + bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1); + bnx2x_release_phy_lock(bp); +} + +u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes) +{ + u8 rc = 0; + + if (!BP_NOMCP(bp)) { + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_test_link(&bp->link_params, &bp->link_vars, + is_serdes); + bnx2x_release_phy_lock(bp); + } else + BNX2X_ERR("Bootcode is missing - can not test link\n"); + + return rc; +} + +/* Calculates the sum of vn_min_rates. + It's needed for further normalizing of the min_rates. + Returns: + sum of vn_min_rates. + or + 0 - if all the min_rates are 0. + In the later case fairness algorithm should be deactivated. + If not all min_rates are zero then those that are zeroes will be set to 1. + */ +static void bnx2x_calc_vn_min(struct bnx2x *bp, + struct cmng_init_input *input) +{ + int all_zero = 1; + int vn; + + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + u32 vn_cfg = bp->mf_config[vn]; + u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >> + FUNC_MF_CFG_MIN_BW_SHIFT) * 100; + + /* Skip hidden vns */ + if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) + vn_min_rate = 0; + /* If min rate is zero - set it to 1 */ + else if (!vn_min_rate) + vn_min_rate = DEF_MIN_RATE; + else + all_zero = 0; + + input->vnic_min_rate[vn] = vn_min_rate; + } + + /* if ETS or all min rates are zeros - disable fairness */ + if (BNX2X_IS_ETS_ENABLED(bp)) { + input->flags.cmng_enables &= + ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN; + DP(NETIF_MSG_IFUP, "Fairness will be disabled due to ETS\n"); + } else if (all_zero) { + input->flags.cmng_enables &= + ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN; + DP(NETIF_MSG_IFUP, + "All MIN values are zeroes fairness will be disabled\n"); + } else + input->flags.cmng_enables |= + CMNG_FLAGS_PER_PORT_FAIRNESS_VN; +} + +static void bnx2x_calc_vn_max(struct bnx2x *bp, int vn, + struct cmng_init_input *input) +{ + u16 vn_max_rate; + u32 vn_cfg = bp->mf_config[vn]; + + if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) + vn_max_rate = 0; + else { + u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg); + + if (IS_MF_SI(bp)) { + /* maxCfg in percents of linkspeed */ + vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100; + } else /* SD modes */ + /* maxCfg is absolute in 100Mb units */ + vn_max_rate = maxCfg * 100; + } + + DP(NETIF_MSG_IFUP, "vn %d: vn_max_rate %d\n", vn, vn_max_rate); + + input->vnic_max_rate[vn] = vn_max_rate; +} + +static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp) +{ + if (CHIP_REV_IS_SLOW(bp)) + return CMNG_FNS_NONE; + if (IS_MF(bp)) + return CMNG_FNS_MINMAX; + + return CMNG_FNS_NONE; +} + +void bnx2x_read_mf_cfg(struct bnx2x *bp) +{ + int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1); + + if (BP_NOMCP(bp)) + return; /* what should be the default value in this case */ + + /* For 2 port configuration the absolute function number formula + * is: + * abs_func = 2 * vn + BP_PORT + BP_PATH + * + * and there are 4 functions per port + * + * For 4 port configuration it is + * abs_func = 4 * vn + 2 * BP_PORT + BP_PATH + * + * and there are 2 functions per port + */ + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp); + + if (func >= E1H_FUNC_MAX) + break; + + bp->mf_config[vn] = + MF_CFG_RD(bp, func_mf_config[func].config); + } + if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) { + DP(NETIF_MSG_IFUP, "mf_cfg function disabled\n"); + bp->flags |= MF_FUNC_DIS; + } else { + DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n"); + bp->flags &= ~MF_FUNC_DIS; + } +} + +static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type) +{ + struct cmng_init_input input; + memset(&input, 0, sizeof(struct cmng_init_input)); + + input.port_rate = bp->link_vars.line_speed; + + if (cmng_type == CMNG_FNS_MINMAX && input.port_rate) { + int vn; + + /* read mf conf from shmem */ + if (read_cfg) + bnx2x_read_mf_cfg(bp); + + /* vn_weight_sum and enable fairness if not 0 */ + bnx2x_calc_vn_min(bp, &input); + + /* calculate and set min-max rate for each vn */ + if (bp->port.pmf) + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) + bnx2x_calc_vn_max(bp, vn, &input); + + /* always enable rate shaping and fairness */ + input.flags.cmng_enables |= + CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN; + + bnx2x_init_cmng(&input, &bp->cmng); + return; + } + + /* rate shaping and fairness are disabled */ + DP(NETIF_MSG_IFUP, + "rate shaping and fairness are disabled\n"); +} + +static void storm_memset_cmng(struct bnx2x *bp, + struct cmng_init *cmng, + u8 port) +{ + int vn; + size_t size = sizeof(struct cmng_struct_per_port); + + u32 addr = BAR_XSTRORM_INTMEM + + XSTORM_CMNG_PER_PORT_VARS_OFFSET(port); + + __storm_memset_struct(bp, addr, size, (u32 *)&cmng->port); + + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + int func = func_by_vn(bp, vn); + + addr = BAR_XSTRORM_INTMEM + + XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func); + size = sizeof(struct rate_shaping_vars_per_vn); + __storm_memset_struct(bp, addr, size, + (u32 *)&cmng->vnic.vnic_max_rate[vn]); + + addr = BAR_XSTRORM_INTMEM + + XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func); + size = sizeof(struct fairness_vars_per_vn); + __storm_memset_struct(bp, addr, size, + (u32 *)&cmng->vnic.vnic_min_rate[vn]); + } +} + +/* init cmng mode in HW according to local configuration */ +void bnx2x_set_local_cmng(struct bnx2x *bp) +{ + int cmng_fns = bnx2x_get_cmng_fns_mode(bp); + + if (cmng_fns != CMNG_FNS_NONE) { + bnx2x_cmng_fns_init(bp, false, cmng_fns); + storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); + } else { + /* rate shaping and fairness are disabled */ + DP(NETIF_MSG_IFUP, + "single function mode without fairness\n"); + } +} + +/* This function is called upon link interrupt */ +static void bnx2x_link_attn(struct bnx2x *bp) +{ + /* Make sure that we are synced with the current statistics */ + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + + bnx2x_link_update(&bp->link_params, &bp->link_vars); + + bnx2x_init_dropless_fc(bp); + + if (bp->link_vars.link_up) { + + if (bp->link_vars.mac_type != MAC_TYPE_EMAC) { + struct host_port_stats *pstats; + + pstats = bnx2x_sp(bp, port_stats); + /* reset old mac stats */ + memset(&(pstats->mac_stx[0]), 0, + sizeof(struct mac_stx)); + } + if (bp->state == BNX2X_STATE_OPEN) + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + } + + if (bp->link_vars.link_up && bp->link_vars.line_speed) + bnx2x_set_local_cmng(bp); + + __bnx2x_link_report(bp); + + if (IS_MF(bp)) + bnx2x_link_sync_notify(bp); +} + +void bnx2x__link_status_update(struct bnx2x *bp) +{ + if (bp->state != BNX2X_STATE_OPEN) + return; + + /* read updated dcb configuration */ + if (IS_PF(bp)) { + bnx2x_dcbx_pmf_update(bp); + bnx2x_link_status_update(&bp->link_params, &bp->link_vars); + if (bp->link_vars.link_up) + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + else + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + /* indicate link status */ + bnx2x_link_report(bp); + + } else { /* VF */ + bp->port.supported[0] |= (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_2500baseX_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + bp->port.advertising[0] = bp->port.supported[0]; + + bp->link_params.bp = bp; + bp->link_params.port = BP_PORT(bp); + bp->link_params.req_duplex[0] = DUPLEX_FULL; + bp->link_params.req_flow_ctrl[0] = BNX2X_FLOW_CTRL_NONE; + bp->link_params.req_line_speed[0] = SPEED_10000; + bp->link_params.speed_cap_mask[0] = 0x7f0000; + bp->link_params.switch_cfg = SWITCH_CFG_10G; + bp->link_vars.mac_type = MAC_TYPE_BMAC; + bp->link_vars.line_speed = SPEED_10000; + bp->link_vars.link_status = + (LINK_STATUS_LINK_UP | + LINK_STATUS_SPEED_AND_DUPLEX_10GTFD); + bp->link_vars.link_up = 1; + bp->link_vars.duplex = DUPLEX_FULL; + bp->link_vars.flow_ctrl = BNX2X_FLOW_CTRL_NONE; + __bnx2x_link_report(bp); + + bnx2x_sample_bulletin(bp); + + /* if bulletin board did not have an update for link status + * __bnx2x_link_report will report current status + * but it will NOT duplicate report in case of already reported + * during sampling bulletin board. + */ + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + } +} + +static int bnx2x_afex_func_update(struct bnx2x *bp, u16 vifid, + u16 vlan_val, u8 allowed_prio) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_afex_update_params *f_update_params = + &func_params.params.afex_update; + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_AFEX_UPDATE; + + /* no need to wait for RAMROD completion, so don't + * set RAMROD_COMP_WAIT flag + */ + + f_update_params->vif_id = vifid; + f_update_params->afex_default_vlan = vlan_val; + f_update_params->allowed_priorities = allowed_prio; + + /* if ramrod can not be sent, response to MCP immediately */ + if (bnx2x_func_state_change(bp, &func_params) < 0) + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); + + return 0; +} + +static int bnx2x_afex_handle_vif_list_cmd(struct bnx2x *bp, u8 cmd_type, + u16 vif_index, u8 func_bit_map) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_afex_viflists_params *update_params = + &func_params.params.afex_viflists; + int rc; + u32 drv_msg_code; + + /* validate only LIST_SET and LIST_GET are received from switch */ + if ((cmd_type != VIF_LIST_RULE_GET) && (cmd_type != VIF_LIST_RULE_SET)) + BNX2X_ERR("BUG! afex_handle_vif_list_cmd invalid type 0x%x\n", + cmd_type); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_AFEX_VIFLISTS; + + /* set parameters according to cmd_type */ + update_params->afex_vif_list_command = cmd_type; + update_params->vif_list_index = vif_index; + update_params->func_bit_map = + (cmd_type == VIF_LIST_RULE_GET) ? 0 : func_bit_map; + update_params->func_to_clear = 0; + drv_msg_code = + (cmd_type == VIF_LIST_RULE_GET) ? + DRV_MSG_CODE_AFEX_LISTGET_ACK : + DRV_MSG_CODE_AFEX_LISTSET_ACK; + + /* if ramrod can not be sent, respond to MCP immediately for + * SET and GET requests (other are not triggered from MCP) + */ + rc = bnx2x_func_state_change(bp, &func_params); + if (rc < 0) + bnx2x_fw_command(bp, drv_msg_code, 0); + + return 0; +} + +static void bnx2x_handle_afex_cmd(struct bnx2x *bp, u32 cmd) +{ + struct afex_stats afex_stats; + u32 func = BP_ABS_FUNC(bp); + u32 mf_config; + u16 vlan_val; + u32 vlan_prio; + u16 vif_id; + u8 allowed_prio; + u8 vlan_mode; + u32 addr_to_write, vifid, addrs, stats_type, i; + + if (cmd & DRV_STATUS_AFEX_LISTGET_REQ) { + vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]); + DP(BNX2X_MSG_MCP, + "afex: got MCP req LISTGET_REQ for vifid 0x%x\n", vifid); + bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_GET, vifid, 0); + } + + if (cmd & DRV_STATUS_AFEX_LISTSET_REQ) { + vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]); + addrs = SHMEM2_RD(bp, afex_param2_to_driver[BP_FW_MB_IDX(bp)]); + DP(BNX2X_MSG_MCP, + "afex: got MCP req LISTSET_REQ for vifid 0x%x addrs 0x%x\n", + vifid, addrs); + bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_SET, vifid, + addrs); + } + + if (cmd & DRV_STATUS_AFEX_STATSGET_REQ) { + addr_to_write = SHMEM2_RD(bp, + afex_scratchpad_addr_to_write[BP_FW_MB_IDX(bp)]); + stats_type = SHMEM2_RD(bp, + afex_param1_to_driver[BP_FW_MB_IDX(bp)]); + + DP(BNX2X_MSG_MCP, + "afex: got MCP req STATSGET_REQ, write to addr 0x%x\n", + addr_to_write); + + bnx2x_afex_collect_stats(bp, (void *)&afex_stats, stats_type); + + /* write response to scratchpad, for MCP */ + for (i = 0; i < (sizeof(struct afex_stats)/sizeof(u32)); i++) + REG_WR(bp, addr_to_write + i*sizeof(u32), + *(((u32 *)(&afex_stats))+i)); + + /* send ack message to MCP */ + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_STATSGET_ACK, 0); + } + + if (cmd & DRV_STATUS_AFEX_VIFSET_REQ) { + mf_config = MF_CFG_RD(bp, func_mf_config[func].config); + bp->mf_config[BP_VN(bp)] = mf_config; + DP(BNX2X_MSG_MCP, + "afex: got MCP req VIFSET_REQ, mf_config 0x%x\n", + mf_config); + + /* if VIF_SET is "enabled" */ + if (!(mf_config & FUNC_MF_CFG_FUNC_DISABLED)) { + /* set rate limit directly to internal RAM */ + struct cmng_init_input cmng_input; + struct rate_shaping_vars_per_vn m_rs_vn; + size_t size = sizeof(struct rate_shaping_vars_per_vn); + u32 addr = BAR_XSTRORM_INTMEM + + XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(BP_FUNC(bp)); + + bp->mf_config[BP_VN(bp)] = mf_config; + + bnx2x_calc_vn_max(bp, BP_VN(bp), &cmng_input); + m_rs_vn.vn_counter.rate = + cmng_input.vnic_max_rate[BP_VN(bp)]; + m_rs_vn.vn_counter.quota = + (m_rs_vn.vn_counter.rate * + RS_PERIODIC_TIMEOUT_USEC) / 8; + + __storm_memset_struct(bp, addr, size, (u32 *)&m_rs_vn); + + /* read relevant values from mf_cfg struct in shmem */ + vif_id = + (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & + FUNC_MF_CFG_E1HOV_TAG_MASK) >> + FUNC_MF_CFG_E1HOV_TAG_SHIFT; + vlan_val = + (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & + FUNC_MF_CFG_AFEX_VLAN_MASK) >> + FUNC_MF_CFG_AFEX_VLAN_SHIFT; + vlan_prio = (mf_config & + FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >> + FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT; + vlan_val |= (vlan_prio << VLAN_PRIO_SHIFT); + vlan_mode = + (MF_CFG_RD(bp, + func_mf_config[func].afex_config) & + FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >> + FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT; + allowed_prio = + (MF_CFG_RD(bp, + func_mf_config[func].afex_config) & + FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >> + FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT; + + /* send ramrod to FW, return in case of failure */ + if (bnx2x_afex_func_update(bp, vif_id, vlan_val, + allowed_prio)) + return; + + bp->afex_def_vlan_tag = vlan_val; + bp->afex_vlan_mode = vlan_mode; + } else { + /* notify link down because BP->flags is disabled */ + bnx2x_link_report(bp); + + /* send INVALID VIF ramrod to FW */ + bnx2x_afex_func_update(bp, 0xFFFF, 0, 0); + + /* Reset the default afex VLAN */ + bp->afex_def_vlan_tag = -1; + } + } +} + +static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp) +{ + struct bnx2x_func_switch_update_params *switch_update_params; + struct bnx2x_func_state_params func_params; + + memset(&func_params, 0, sizeof(struct bnx2x_func_state_params)); + switch_update_params = &func_params.params.switch_update; + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; + + if (IS_MF_UFP(bp)) { + int func = BP_ABS_FUNC(bp); + u32 val; + + /* Re-learn the S-tag from shmem */ + val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & + FUNC_MF_CFG_E1HOV_TAG_MASK; + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { + bp->mf_ov = val; + } else { + BNX2X_ERR("Got an SVID event, but no tag is configured in shmem\n"); + goto fail; + } + + /* Configure new S-tag in LLH */ + REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + BP_PORT(bp) * 8, + bp->mf_ov); + + /* Send Ramrod to update FW of change */ + __set_bit(BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG, + &switch_update_params->changes); + switch_update_params->vlan = bp->mf_ov; + + if (bnx2x_func_state_change(bp, &func_params) < 0) { + BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n", + bp->mf_ov); + goto fail; + } + + DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n", bp->mf_ov); + + bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0); + + return; + } + + /* not supported by SW yet */ +fail: + bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0); +} + +static void bnx2x_pmf_update(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 val; + + bp->port.pmf = 1; + DP(BNX2X_MSG_MCP, "pmf %d\n", bp->port.pmf); + + /* + * We need the mb() to ensure the ordering between the writing to + * bp->port.pmf here and reading it from the bnx2x_periodic_task(). + */ + smp_mb(); + + /* queue a periodic task */ + queue_delayed_work(bnx2x_wq, &bp->period_task, 0); + + bnx2x_dcbx_pmf_update(bp); + + /* enable nig attention */ + val = (0xff0f | (1 << (BP_VN(bp) + 4))); + if (bp->common.int_block == INT_BLOCK_HC) { + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); + } else if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val); + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val); + } + + bnx2x_stats_handle(bp, STATS_EVENT_PMF); +} + +/* end of Link */ + +/* slow path */ + +/* + * General service functions + */ + +/* send the MCP a request, block until there is a reply */ +u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param) +{ + int mb_idx = BP_FW_MB_IDX(bp); + u32 seq; + u32 rc = 0; + u32 cnt = 1; + u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10; + + mutex_lock(&bp->fw_mb_mutex); + seq = ++bp->fw_seq; + SHMEM_WR(bp, func_mb[mb_idx].drv_mb_param, param); + SHMEM_WR(bp, func_mb[mb_idx].drv_mb_header, (command | seq)); + + DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB param 0x%08x\n", + (command | seq), param); + + do { + /* let the FW do it's magic ... */ + msleep(delay); + + rc = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_header); + + /* Give the FW up to 5 second (500*10ms) */ + } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500)); + + DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n", + cnt*delay, rc, seq); + + /* is this a reply to our command? */ + if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) + rc &= FW_MSG_CODE_MASK; + else { + /* FW BUG! */ + BNX2X_ERR("FW failed to respond!\n"); + bnx2x_fw_dump(bp); + rc = 0; + } + mutex_unlock(&bp->fw_mb_mutex); + + return rc; +} + +static void storm_memset_func_cfg(struct bnx2x *bp, + struct tstorm_eth_function_common_config *tcfg, + u16 abs_fid) +{ + size_t size = sizeof(struct tstorm_eth_function_common_config); + + u32 addr = BAR_TSTRORM_INTMEM + + TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid); + + __storm_memset_struct(bp, addr, size, (u32 *)tcfg); +} + +void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p) +{ + if (CHIP_IS_E1x(bp)) { + struct tstorm_eth_function_common_config tcfg = {0}; + + storm_memset_func_cfg(bp, &tcfg, p->func_id); + } + + /* Enable the function in the FW */ + storm_memset_vf_to_pf(bp, p->func_id, p->pf_id); + storm_memset_func_en(bp, p->func_id, 1); + + /* spq */ + if (p->func_flgs & FUNC_FLG_SPQ) { + storm_memset_spq_addr(bp, p->spq_map, p->func_id); + REG_WR(bp, XSEM_REG_FAST_MEMORY + + XSTORM_SPQ_PROD_OFFSET(p->func_id), p->spq_prod); + } +} + +/** + * bnx2x_get_common_flags - Return common flags + * + * @bp device handle + * @fp queue handle + * @zero_stats TRUE if statistics zeroing is needed + * + * Return the flags that are common for the Tx-only and not normal connections. + */ +static unsigned long bnx2x_get_common_flags(struct bnx2x *bp, + struct bnx2x_fastpath *fp, + bool zero_stats) +{ + unsigned long flags = 0; + + /* PF driver will always initialize the Queue to an ACTIVE state */ + __set_bit(BNX2X_Q_FLG_ACTIVE, &flags); + + /* tx only connections collect statistics (on the same index as the + * parent connection). The statistics are zeroed when the parent + * connection is initialized. + */ + + __set_bit(BNX2X_Q_FLG_STATS, &flags); + if (zero_stats) + __set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags); + + if (bp->flags & TX_SWITCHING) + __set_bit(BNX2X_Q_FLG_TX_SWITCH, &flags); + + __set_bit(BNX2X_Q_FLG_PCSUM_ON_PKT, &flags); + __set_bit(BNX2X_Q_FLG_TUN_INC_INNER_IP_ID, &flags); + +#ifdef BNX2X_STOP_ON_ERROR + __set_bit(BNX2X_Q_FLG_TX_SEC, &flags); +#endif + + return flags; +} + +static unsigned long bnx2x_get_q_flags(struct bnx2x *bp, + struct bnx2x_fastpath *fp, + bool leading) +{ + unsigned long flags = 0; + + /* calculate other queue flags */ + if (IS_MF_SD(bp)) + __set_bit(BNX2X_Q_FLG_OV, &flags); + + if (IS_FCOE_FP(fp)) { + __set_bit(BNX2X_Q_FLG_FCOE, &flags); + /* For FCoE - force usage of default priority (for afex) */ + __set_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI, &flags); + } + + if (fp->mode != TPA_MODE_DISABLED) { + __set_bit(BNX2X_Q_FLG_TPA, &flags); + __set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags); + if (fp->mode == TPA_MODE_GRO) + __set_bit(BNX2X_Q_FLG_TPA_GRO, &flags); + } + + if (leading) { + __set_bit(BNX2X_Q_FLG_LEADING_RSS, &flags); + __set_bit(BNX2X_Q_FLG_MCAST, &flags); + } + + /* Always set HW VLAN stripping */ + __set_bit(BNX2X_Q_FLG_VLAN, &flags); + + /* configure silent vlan removal */ + if (IS_MF_AFEX(bp)) + __set_bit(BNX2X_Q_FLG_SILENT_VLAN_REM, &flags); + + return flags | bnx2x_get_common_flags(bp, fp, true); +} + +static void bnx2x_pf_q_prep_general(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct bnx2x_general_setup_params *gen_init, + u8 cos) +{ + gen_init->stat_id = bnx2x_stats_id(fp); + gen_init->spcl_id = fp->cl_id; + + /* Always use mini-jumbo MTU for FCoE L2 ring */ + if (IS_FCOE_FP(fp)) + gen_init->mtu = BNX2X_FCOE_MINI_JUMBO_MTU; + else + gen_init->mtu = bp->dev->mtu; + + gen_init->cos = cos; + + gen_init->fp_hsi = ETH_FP_HSI_VERSION; +} + +static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct rxq_pause_params *pause, + struct bnx2x_rxq_setup_params *rxq_init) +{ + u8 max_sge = 0; + u16 sge_sz = 0; + u16 tpa_agg_size = 0; + + if (fp->mode != TPA_MODE_DISABLED) { + pause->sge_th_lo = SGE_TH_LO(bp); + pause->sge_th_hi = SGE_TH_HI(bp); + + /* validate SGE ring has enough to cross high threshold */ + WARN_ON(bp->dropless_fc && + pause->sge_th_hi + FW_PREFETCH_CNT > + MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES); + + tpa_agg_size = TPA_AGG_SIZE; + max_sge = SGE_PAGE_ALIGN(bp->dev->mtu) >> + SGE_PAGE_SHIFT; + max_sge = ((max_sge + PAGES_PER_SGE - 1) & + (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT; + sge_sz = (u16)min_t(u32, SGE_PAGES, 0xffff); + } + + /* pause - not for e1 */ + if (!CHIP_IS_E1(bp)) { + pause->bd_th_lo = BD_TH_LO(bp); + pause->bd_th_hi = BD_TH_HI(bp); + + pause->rcq_th_lo = RCQ_TH_LO(bp); + pause->rcq_th_hi = RCQ_TH_HI(bp); + /* + * validate that rings have enough entries to cross + * high thresholds + */ + WARN_ON(bp->dropless_fc && + pause->bd_th_hi + FW_PREFETCH_CNT > + bp->rx_ring_size); + WARN_ON(bp->dropless_fc && + pause->rcq_th_hi + FW_PREFETCH_CNT > + NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT); + + pause->pri_map = 1; + } + + /* rxq setup */ + rxq_init->dscr_map = fp->rx_desc_mapping; + rxq_init->sge_map = fp->rx_sge_mapping; + rxq_init->rcq_map = fp->rx_comp_mapping; + rxq_init->rcq_np_map = fp->rx_comp_mapping + BCM_PAGE_SIZE; + + /* This should be a maximum number of data bytes that may be + * placed on the BD (not including paddings). + */ + rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN_START - + BNX2X_FW_RX_ALIGN_END - IP_HEADER_ALIGNMENT_PADDING; + + rxq_init->cl_qzone_id = fp->cl_qzone_id; + rxq_init->tpa_agg_sz = tpa_agg_size; + rxq_init->sge_buf_sz = sge_sz; + rxq_init->max_sges_pkt = max_sge; + rxq_init->rss_engine_id = BP_FUNC(bp); + rxq_init->mcast_engine_id = BP_FUNC(bp); + + /* Maximum number or simultaneous TPA aggregation for this Queue. + * + * For PF Clients it should be the maximum available number. + * VF driver(s) may want to define it to a smaller value. + */ + rxq_init->max_tpa_queues = MAX_AGG_QS(bp); + + rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT; + rxq_init->fw_sb_id = fp->fw_sb_id; + + if (IS_FCOE_FP(fp)) + rxq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS; + else + rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS; + /* configure silent vlan removal + * if multi function mode is afex, then mask default vlan + */ + if (IS_MF_AFEX(bp)) { + rxq_init->silent_removal_value = bp->afex_def_vlan_tag; + rxq_init->silent_removal_mask = VLAN_VID_MASK; + } +} + +static void bnx2x_pf_tx_q_prep(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct bnx2x_txq_setup_params *txq_init, + u8 cos) +{ + txq_init->dscr_map = fp->txdata_ptr[cos]->tx_desc_mapping; + txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos; + txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW; + txq_init->fw_sb_id = fp->fw_sb_id; + + /* + * set the tss leading client id for TX classification == + * leading RSS client id + */ + txq_init->tss_leading_cl_id = bnx2x_fp(bp, 0, cl_id); + + if (IS_FCOE_FP(fp)) { + txq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS; + txq_init->traffic_type = LLFC_TRAFFIC_TYPE_FCOE; + } +} + +static void bnx2x_pf_init(struct bnx2x *bp) +{ + struct bnx2x_func_init_params func_init = {0}; + struct event_ring_data eq_data = { {0} }; + u16 flags; + + if (!CHIP_IS_E1x(bp)) { + /* reset IGU PF statistics: MSIX + ATTN */ + /* PF */ + REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + + BNX2X_IGU_STAS_MSG_VF_CNT*4 + + (CHIP_MODE_IS_4_PORT(bp) ? + BP_FUNC(bp) : BP_VN(bp))*4, 0); + /* ATTN */ + REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + + BNX2X_IGU_STAS_MSG_VF_CNT*4 + + BNX2X_IGU_STAS_MSG_PF_CNT*4 + + (CHIP_MODE_IS_4_PORT(bp) ? + BP_FUNC(bp) : BP_VN(bp))*4, 0); + } + + /* function setup flags */ + flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ); + + /* This flag is relevant for E1x only. + * E2 doesn't have a TPA configuration in a function level. + */ + flags |= (bp->dev->features & NETIF_F_LRO) ? FUNC_FLG_TPA : 0; + + func_init.func_flgs = flags; + func_init.pf_id = BP_FUNC(bp); + func_init.func_id = BP_FUNC(bp); + func_init.spq_map = bp->spq_mapping; + func_init.spq_prod = bp->spq_prod_idx; + + bnx2x_func_init(bp, &func_init); + + memset(&(bp->cmng), 0, sizeof(struct cmng_struct_per_port)); + + /* + * Congestion management values depend on the link rate + * There is no active link so initial link rate is set to 10 Gbps. + * When the link comes up The congestion management values are + * re-calculated according to the actual link rate. + */ + bp->link_vars.line_speed = SPEED_10000; + bnx2x_cmng_fns_init(bp, true, bnx2x_get_cmng_fns_mode(bp)); + + /* Only the PMF sets the HW */ + if (bp->port.pmf) + storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); + + /* init Event Queue - PCI bus guarantees correct endianity*/ + eq_data.base_addr.hi = U64_HI(bp->eq_mapping); + eq_data.base_addr.lo = U64_LO(bp->eq_mapping); + eq_data.producer = bp->eq_prod; + eq_data.index_id = HC_SP_INDEX_EQ_CONS; + eq_data.sb_id = DEF_SB_ID; + storm_memset_eq_data(bp, &eq_data, BP_FUNC(bp)); +} + +static void bnx2x_e1h_disable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + + bnx2x_tx_disable(bp); + + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); +} + +static void bnx2x_e1h_enable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + + if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1); + + /* Tx queue should be only re-enabled */ + netif_tx_wake_all_queues(bp->dev); + + /* + * Should not call netif_carrier_on since it will be called if the link + * is up when checking for link state + */ +} + +#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3 + +static void bnx2x_drv_info_ether_stat(struct bnx2x *bp) +{ + struct eth_stats_info *ether_stat = + &bp->slowpath->drv_info_to_mcp.ether_stat; + struct bnx2x_vlan_mac_obj *mac_obj = + &bp->sp_objs->mac_obj; + int i; + + strlcpy(ether_stat->version, DRV_MODULE_VERSION, + ETH_STAT_INFO_VERSION_LEN); + + /* get DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED macs, placing them in the + * mac_local field in ether_stat struct. The base address is offset by 2 + * bytes to account for the field being 8 bytes but a mac address is + * only 6 bytes. Likewise, the stride for the get_n_elements function is + * 2 bytes to compensate from the 6 bytes of a mac to the 8 bytes + * allocated by the ether_stat struct, so the macs will land in their + * proper positions. + */ + for (i = 0; i < DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED; i++) + memset(ether_stat->mac_local + i, 0, + sizeof(ether_stat->mac_local[0])); + mac_obj->get_n_elements(bp, &bp->sp_objs[0].mac_obj, + DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED, + ether_stat->mac_local + MAC_PAD, MAC_PAD, + ETH_ALEN); + ether_stat->mtu_size = bp->dev->mtu; + if (bp->dev->features & NETIF_F_RXCSUM) + ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK; + if (bp->dev->features & NETIF_F_TSO) + ether_stat->feature_flags |= FEATURE_ETH_LSO_MASK; + ether_stat->feature_flags |= bp->common.boot_mode; + + ether_stat->promiscuous_mode = (bp->dev->flags & IFF_PROMISC) ? 1 : 0; + + ether_stat->txq_size = bp->tx_ring_size; + ether_stat->rxq_size = bp->rx_ring_size; + +#ifdef CONFIG_BNX2X_SRIOV + ether_stat->vf_cnt = IS_SRIOV(bp) ? bp->vfdb->sriov.nr_virtfn : 0; +#endif +} + +static void bnx2x_drv_info_fcoe_stat(struct bnx2x *bp) +{ + struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app; + struct fcoe_stats_info *fcoe_stat = + &bp->slowpath->drv_info_to_mcp.fcoe_stat; + + if (!CNIC_LOADED(bp)) + return; + + memcpy(fcoe_stat->mac_local + MAC_PAD, bp->fip_mac, ETH_ALEN); + + fcoe_stat->qos_priority = + app->traffic_type_priority[LLFC_TRAFFIC_TYPE_FCOE]; + + /* insert FCoE stats from ramrod response */ + if (!NO_FCOE(bp)) { + struct tstorm_per_queue_stats *fcoe_q_tstorm_stats = + &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)]. + tstorm_queue_statistics; + + struct xstorm_per_queue_stats *fcoe_q_xstorm_stats = + &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)]. + xstorm_queue_statistics; + + struct fcoe_statistics_params *fw_fcoe_stat = + &bp->fw_stats_data->fcoe; + + ADD_64_LE(fcoe_stat->rx_bytes_hi, LE32_0, + fcoe_stat->rx_bytes_lo, + fw_fcoe_stat->rx_stat0.fcoe_rx_byte_cnt); + + ADD_64_LE(fcoe_stat->rx_bytes_hi, + fcoe_q_tstorm_stats->rcv_ucast_bytes.hi, + fcoe_stat->rx_bytes_lo, + fcoe_q_tstorm_stats->rcv_ucast_bytes.lo); + + ADD_64_LE(fcoe_stat->rx_bytes_hi, + fcoe_q_tstorm_stats->rcv_bcast_bytes.hi, + fcoe_stat->rx_bytes_lo, + fcoe_q_tstorm_stats->rcv_bcast_bytes.lo); + + ADD_64_LE(fcoe_stat->rx_bytes_hi, + fcoe_q_tstorm_stats->rcv_mcast_bytes.hi, + fcoe_stat->rx_bytes_lo, + fcoe_q_tstorm_stats->rcv_mcast_bytes.lo); + + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fw_fcoe_stat->rx_stat0.fcoe_rx_pkt_cnt); + + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fcoe_q_tstorm_stats->rcv_ucast_pkts); + + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fcoe_q_tstorm_stats->rcv_bcast_pkts); + + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fcoe_q_tstorm_stats->rcv_mcast_pkts); + + ADD_64_LE(fcoe_stat->tx_bytes_hi, LE32_0, + fcoe_stat->tx_bytes_lo, + fw_fcoe_stat->tx_stat.fcoe_tx_byte_cnt); + + ADD_64_LE(fcoe_stat->tx_bytes_hi, + fcoe_q_xstorm_stats->ucast_bytes_sent.hi, + fcoe_stat->tx_bytes_lo, + fcoe_q_xstorm_stats->ucast_bytes_sent.lo); + + ADD_64_LE(fcoe_stat->tx_bytes_hi, + fcoe_q_xstorm_stats->bcast_bytes_sent.hi, + fcoe_stat->tx_bytes_lo, + fcoe_q_xstorm_stats->bcast_bytes_sent.lo); + + ADD_64_LE(fcoe_stat->tx_bytes_hi, + fcoe_q_xstorm_stats->mcast_bytes_sent.hi, + fcoe_stat->tx_bytes_lo, + fcoe_q_xstorm_stats->mcast_bytes_sent.lo); + + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fw_fcoe_stat->tx_stat.fcoe_tx_pkt_cnt); + + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fcoe_q_xstorm_stats->ucast_pkts_sent); + + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fcoe_q_xstorm_stats->bcast_pkts_sent); + + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fcoe_q_xstorm_stats->mcast_pkts_sent); + } + + /* ask L5 driver to add data to the struct */ + bnx2x_cnic_notify(bp, CNIC_CTL_FCOE_STATS_GET_CMD); +} + +static void bnx2x_drv_info_iscsi_stat(struct bnx2x *bp) +{ + struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app; + struct iscsi_stats_info *iscsi_stat = + &bp->slowpath->drv_info_to_mcp.iscsi_stat; + + if (!CNIC_LOADED(bp)) + return; + + memcpy(iscsi_stat->mac_local + MAC_PAD, bp->cnic_eth_dev.iscsi_mac, + ETH_ALEN); + + iscsi_stat->qos_priority = + app->traffic_type_priority[LLFC_TRAFFIC_TYPE_ISCSI]; + + /* ask L5 driver to add data to the struct */ + bnx2x_cnic_notify(bp, CNIC_CTL_ISCSI_STATS_GET_CMD); +} + +/* called due to MCP event (on pmf): + * reread new bandwidth configuration + * configure FW + * notify others function about the change + */ +static void bnx2x_config_mf_bw(struct bnx2x *bp) +{ + if (bp->link_vars.link_up) { + bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX); + bnx2x_link_sync_notify(bp); + } + storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); +} + +static void bnx2x_set_mf_bw(struct bnx2x *bp) +{ + bnx2x_config_mf_bw(bp); + bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW_ACK, 0); +} + +static void bnx2x_handle_eee_event(struct bnx2x *bp) +{ + DP(BNX2X_MSG_MCP, "EEE - LLDP event\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_EEE_RESULTS_ACK, 0); +} + +#define BNX2X_UPDATE_DRV_INFO_IND_LENGTH (20) +#define BNX2X_UPDATE_DRV_INFO_IND_COUNT (25) + +static void bnx2x_handle_drv_info_req(struct bnx2x *bp) +{ + enum drv_info_opcode op_code; + u32 drv_info_ctl = SHMEM2_RD(bp, drv_info_control); + bool release = false; + int wait; + + /* if drv_info version supported by MFW doesn't match - send NACK */ + if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) { + bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0); + return; + } + + op_code = (drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >> + DRV_INFO_CONTROL_OP_CODE_SHIFT; + + /* Must prevent other flows from accessing drv_info_to_mcp */ + mutex_lock(&bp->drv_info_mutex); + + memset(&bp->slowpath->drv_info_to_mcp, 0, + sizeof(union drv_info_to_mcp)); + + switch (op_code) { + case ETH_STATS_OPCODE: + bnx2x_drv_info_ether_stat(bp); + break; + case FCOE_STATS_OPCODE: + bnx2x_drv_info_fcoe_stat(bp); + break; + case ISCSI_STATS_OPCODE: + bnx2x_drv_info_iscsi_stat(bp); + break; + default: + /* if op code isn't supported - send NACK */ + bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0); + goto out; + } + + /* if we got drv_info attn from MFW then these fields are defined in + * shmem2 for sure + */ + SHMEM2_WR(bp, drv_info_host_addr_lo, + U64_LO(bnx2x_sp_mapping(bp, drv_info_to_mcp))); + SHMEM2_WR(bp, drv_info_host_addr_hi, + U64_HI(bnx2x_sp_mapping(bp, drv_info_to_mcp))); + + bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_ACK, 0); + + /* Since possible management wants both this and get_driver_version + * need to wait until management notifies us it finished utilizing + * the buffer. + */ + if (!SHMEM2_HAS(bp, mfw_drv_indication)) { + DP(BNX2X_MSG_MCP, "Management does not support indication\n"); + } else if (!bp->drv_info_mng_owner) { + u32 bit = MFW_DRV_IND_READ_DONE_OFFSET((BP_ABS_FUNC(bp) >> 1)); + + for (wait = 0; wait < BNX2X_UPDATE_DRV_INFO_IND_COUNT; wait++) { + u32 indication = SHMEM2_RD(bp, mfw_drv_indication); + + /* Management is done; need to clear indication */ + if (indication & bit) { + SHMEM2_WR(bp, mfw_drv_indication, + indication & ~bit); + release = true; + break; + } + + msleep(BNX2X_UPDATE_DRV_INFO_IND_LENGTH); + } + } + if (!release) { + DP(BNX2X_MSG_MCP, "Management did not release indication\n"); + bp->drv_info_mng_owner = true; + } + +out: + mutex_unlock(&bp->drv_info_mutex); +} + +static u32 bnx2x_update_mng_version_utility(u8 *version, bool bnx2x_format) +{ + u8 vals[4]; + int i = 0; + + if (bnx2x_format) { + i = sscanf(version, "1.%c%hhd.%hhd.%hhd", + &vals[0], &vals[1], &vals[2], &vals[3]); + if (i > 0) + vals[0] -= '0'; + } else { + i = sscanf(version, "%hhd.%hhd.%hhd.%hhd", + &vals[0], &vals[1], &vals[2], &vals[3]); + } + + while (i < 4) + vals[i++] = 0; + + return (vals[0] << 24) | (vals[1] << 16) | (vals[2] << 8) | vals[3]; +} + +void bnx2x_update_mng_version(struct bnx2x *bp) +{ + u32 iscsiver = DRV_VER_NOT_LOADED; + u32 fcoever = DRV_VER_NOT_LOADED; + u32 ethver = DRV_VER_NOT_LOADED; + int idx = BP_FW_MB_IDX(bp); + u8 *version; + + if (!SHMEM2_HAS(bp, func_os_drv_ver)) + return; + + mutex_lock(&bp->drv_info_mutex); + /* Must not proceed when `bnx2x_handle_drv_info_req' is feasible */ + if (bp->drv_info_mng_owner) + goto out; + + if (bp->state != BNX2X_STATE_OPEN) + goto out; + + /* Parse ethernet driver version */ + ethver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true); + if (!CNIC_LOADED(bp)) + goto out; + + /* Try getting storage driver version via cnic */ + memset(&bp->slowpath->drv_info_to_mcp, 0, + sizeof(union drv_info_to_mcp)); + bnx2x_drv_info_iscsi_stat(bp); + version = bp->slowpath->drv_info_to_mcp.iscsi_stat.version; + iscsiver = bnx2x_update_mng_version_utility(version, false); + + memset(&bp->slowpath->drv_info_to_mcp, 0, + sizeof(union drv_info_to_mcp)); + bnx2x_drv_info_fcoe_stat(bp); + version = bp->slowpath->drv_info_to_mcp.fcoe_stat.version; + fcoever = bnx2x_update_mng_version_utility(version, false); + +out: + SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ETHERNET], ethver); + SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ISCSI], iscsiver); + SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_FCOE], fcoever); + + mutex_unlock(&bp->drv_info_mutex); + + DP(BNX2X_MSG_MCP, "Setting driver version: ETH [%08x] iSCSI [%08x] FCoE [%08x]\n", + ethver, iscsiver, fcoever); +} + +static void bnx2x_oem_event(struct bnx2x *bp, u32 event) +{ + u32 cmd_ok, cmd_fail; + + /* sanity */ + if (event & DRV_STATUS_DCC_EVENT_MASK && + event & DRV_STATUS_OEM_EVENT_MASK) { + BNX2X_ERR("Received simultaneous events %08x\n", event); + return; + } + + if (event & DRV_STATUS_DCC_EVENT_MASK) { + cmd_fail = DRV_MSG_CODE_DCC_FAILURE; + cmd_ok = DRV_MSG_CODE_DCC_OK; + } else /* if (event & DRV_STATUS_OEM_EVENT_MASK) */ { + cmd_fail = DRV_MSG_CODE_OEM_FAILURE; + cmd_ok = DRV_MSG_CODE_OEM_OK; + } + + DP(BNX2X_MSG_MCP, "oem_event 0x%x\n", event); + + if (event & (DRV_STATUS_DCC_DISABLE_ENABLE_PF | + DRV_STATUS_OEM_DISABLE_ENABLE_PF)) { + /* This is the only place besides the function initialization + * where the bp->flags can change so it is done without any + * locks + */ + if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) { + DP(BNX2X_MSG_MCP, "mf_cfg function disabled\n"); + bp->flags |= MF_FUNC_DIS; + + bnx2x_e1h_disable(bp); + } else { + DP(BNX2X_MSG_MCP, "mf_cfg function enabled\n"); + bp->flags &= ~MF_FUNC_DIS; + + bnx2x_e1h_enable(bp); + } + event &= ~(DRV_STATUS_DCC_DISABLE_ENABLE_PF | + DRV_STATUS_OEM_DISABLE_ENABLE_PF); + } + + if (event & (DRV_STATUS_DCC_BANDWIDTH_ALLOCATION | + DRV_STATUS_OEM_BANDWIDTH_ALLOCATION)) { + bnx2x_config_mf_bw(bp); + event &= ~(DRV_STATUS_DCC_BANDWIDTH_ALLOCATION | + DRV_STATUS_OEM_BANDWIDTH_ALLOCATION); + } + + /* Report results to MCP */ + if (event) + bnx2x_fw_command(bp, cmd_fail, 0); + else + bnx2x_fw_command(bp, cmd_ok, 0); +} + +/* must be called under the spq lock */ +static struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp) +{ + struct eth_spe *next_spe = bp->spq_prod_bd; + + if (bp->spq_prod_bd == bp->spq_last_bd) { + bp->spq_prod_bd = bp->spq; + bp->spq_prod_idx = 0; + DP(BNX2X_MSG_SP, "end of spq\n"); + } else { + bp->spq_prod_bd++; + bp->spq_prod_idx++; + } + return next_spe; +} + +/* must be called under the spq lock */ +static void bnx2x_sp_prod_update(struct bnx2x *bp) +{ + int func = BP_FUNC(bp); + + /* + * Make sure that BD data is updated before writing the producer: + * BD data is written to the memory, the producer is read from the + * memory, thus we need a full memory barrier to ensure the ordering. + */ + mb(); + + REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func), + bp->spq_prod_idx); + mmiowb(); +} + +/** + * bnx2x_is_contextless_ramrod - check if the current command ends on EQ + * + * @cmd: command to check + * @cmd_type: command type + */ +static bool bnx2x_is_contextless_ramrod(int cmd, int cmd_type) +{ + if ((cmd_type == NONE_CONNECTION_TYPE) || + (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) || + (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) || + (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) || + (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) || + (cmd == RAMROD_CMD_ID_ETH_SET_MAC) || + (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) + return true; + else + return false; +} + +/** + * bnx2x_sp_post - place a single command on an SP ring + * + * @bp: driver handle + * @command: command to place (e.g. SETUP, FILTER_RULES, etc.) + * @cid: SW CID the command is related to + * @data_hi: command private data address (high 32 bits) + * @data_lo: command private data address (low 32 bits) + * @cmd_type: command type (e.g. NONE, ETH) + * + * SP data is handled as if it's always an address pair, thus data fields are + * not swapped to little endian in upper functions. Instead this function swaps + * data as if it's two u32 fields. + */ +int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, + u32 data_hi, u32 data_lo, int cmd_type) +{ + struct eth_spe *spe; + u16 type; + bool common = bnx2x_is_contextless_ramrod(command, cmd_type); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) { + BNX2X_ERR("Can't post SP when there is panic\n"); + return -EIO; + } +#endif + + spin_lock_bh(&bp->spq_lock); + + if (common) { + if (!atomic_read(&bp->eq_spq_left)) { + BNX2X_ERR("BUG! EQ ring full!\n"); + spin_unlock_bh(&bp->spq_lock); + bnx2x_panic(); + return -EBUSY; + } + } else if (!atomic_read(&bp->cq_spq_left)) { + BNX2X_ERR("BUG! SPQ ring full!\n"); + spin_unlock_bh(&bp->spq_lock); + bnx2x_panic(); + return -EBUSY; + } + + spe = bnx2x_sp_get_next(bp); + + /* CID needs port number to be encoded int it */ + spe->hdr.conn_and_cmd_data = + cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) | + HW_CID(bp, cid)); + + /* In some cases, type may already contain the func-id + * mainly in SRIOV related use cases, so we add it here only + * if it's not already set. + */ + if (!(cmd_type & SPE_HDR_FUNCTION_ID)) { + type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & + SPE_HDR_CONN_TYPE; + type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) & + SPE_HDR_FUNCTION_ID); + } else { + type = cmd_type; + } + + spe->hdr.type = cpu_to_le16(type); + + spe->data.update_data_addr.hi = cpu_to_le32(data_hi); + spe->data.update_data_addr.lo = cpu_to_le32(data_lo); + + /* + * It's ok if the actual decrement is issued towards the memory + * somewhere between the spin_lock and spin_unlock. Thus no + * more explicit memory barrier is needed. + */ + if (common) + atomic_dec(&bp->eq_spq_left); + else + atomic_dec(&bp->cq_spq_left); + + DP(BNX2X_MSG_SP, + "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x data (%x:%x) type(0x%x) left (CQ, EQ) (%x,%x)\n", + bp->spq_prod_idx, (u32)U64_HI(bp->spq_mapping), + (u32)(U64_LO(bp->spq_mapping) + + (void *)bp->spq_prod_bd - (void *)bp->spq), command, common, + HW_CID(bp, cid), data_hi, data_lo, type, + atomic_read(&bp->cq_spq_left), atomic_read(&bp->eq_spq_left)); + + bnx2x_sp_prod_update(bp); + spin_unlock_bh(&bp->spq_lock); + return 0; +} + +/* acquire split MCP access lock register */ +static int bnx2x_acquire_alr(struct bnx2x *bp) +{ + u32 j, val; + int rc = 0; + + might_sleep(); + for (j = 0; j < 1000; j++) { + REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, MCPR_ACCESS_LOCK_LOCK); + val = REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK); + if (val & MCPR_ACCESS_LOCK_LOCK) + break; + + usleep_range(5000, 10000); + } + if (!(val & MCPR_ACCESS_LOCK_LOCK)) { + BNX2X_ERR("Cannot acquire MCP access lock register\n"); + rc = -EBUSY; + } + + return rc; +} + +/* release split MCP access lock register */ +static void bnx2x_release_alr(struct bnx2x *bp) +{ + REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, 0); +} + +#define BNX2X_DEF_SB_ATT_IDX 0x0001 +#define BNX2X_DEF_SB_IDX 0x0002 + +static u16 bnx2x_update_dsb_idx(struct bnx2x *bp) +{ + struct host_sp_status_block *def_sb = bp->def_status_blk; + u16 rc = 0; + + barrier(); /* status block is written to by the chip */ + if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) { + bp->def_att_idx = def_sb->atten_status_block.attn_bits_index; + rc |= BNX2X_DEF_SB_ATT_IDX; + } + + if (bp->def_idx != def_sb->sp_sb.running_index) { + bp->def_idx = def_sb->sp_sb.running_index; + rc |= BNX2X_DEF_SB_IDX; + } + + /* Do not reorder: indices reading should complete before handling */ + barrier(); + return rc; +} + +/* + * slow path service functions + */ + +static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) +{ + int port = BP_PORT(bp); + u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0; + u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : + NIG_REG_MASK_INTERRUPT_PORT0; + u32 aeu_mask; + u32 nig_mask = 0; + u32 reg_addr; + + if (bp->attn_state & asserted) + BNX2X_ERR("IGU ERROR\n"); + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + aeu_mask = REG_RD(bp, aeu_addr); + + DP(NETIF_MSG_HW, "aeu_mask %x newly asserted %x\n", + aeu_mask, asserted); + aeu_mask &= ~(asserted & 0x3ff); + DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask); + + REG_WR(bp, aeu_addr, aeu_mask); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + + DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state); + bp->attn_state |= asserted; + DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state); + + if (asserted & ATTN_HARD_WIRED_MASK) { + if (asserted & ATTN_NIG_FOR_FUNC) { + + bnx2x_acquire_phy_lock(bp); + + /* save nig interrupt mask */ + nig_mask = REG_RD(bp, nig_int_mask_addr); + + /* If nig_mask is not set, no need to call the update + * function. + */ + if (nig_mask) { + REG_WR(bp, nig_int_mask_addr, 0); + + bnx2x_link_attn(bp); + } + + /* handle unicore attn? */ + } + if (asserted & ATTN_SW_TIMER_4_FUNC) + DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n"); + + if (asserted & GPIO_2_FUNC) + DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n"); + + if (asserted & GPIO_3_FUNC) + DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n"); + + if (asserted & GPIO_4_FUNC) + DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n"); + + if (port == 0) { + if (asserted & ATTN_GENERAL_ATTN_1) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_1!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_1, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_2) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_2, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_3) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_3, 0x0); + } + } else { + if (asserted & ATTN_GENERAL_ATTN_4) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_4!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_4, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_5) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_5!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_5, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_6) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_6!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_6, 0x0); + } + } + + } /* if hardwired */ + + if (bp->common.int_block == INT_BLOCK_HC) + reg_addr = (HC_REG_COMMAND_REG + port*32 + + COMMAND_REG_ATTN_BITS_SET); + else + reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER*8); + + DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", asserted, + (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr); + REG_WR(bp, reg_addr, asserted); + + /* now set back the mask */ + if (asserted & ATTN_NIG_FOR_FUNC) { + /* Verify that IGU ack through BAR was written before restoring + * NIG mask. This loop should exit after 2-3 iterations max. + */ + if (bp->common.int_block != INT_BLOCK_HC) { + u32 cnt = 0, igu_acked; + do { + igu_acked = REG_RD(bp, + IGU_REG_ATTENTION_ACK_BITS); + } while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0) && + (++cnt < MAX_IGU_ATTN_ACK_TO)); + if (!igu_acked) + DP(NETIF_MSG_HW, + "Failed to verify IGU ack on time\n"); + barrier(); + } + REG_WR(bp, nig_int_mask_addr, nig_mask); + bnx2x_release_phy_lock(bp); + } +} + +static void bnx2x_fan_failure(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 ext_phy_config; + /* mark the failure */ + ext_phy_config = + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config); + + ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK; + ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE; + SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config, + ext_phy_config); + + /* log the failure */ + netdev_err(bp->dev, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n" + "Please contact OEM Support for assistance\n"); + + /* Schedule device reset (unload) + * This is due to some boards consuming sufficient power when driver is + * up to overheat if fan fails. + */ + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_FAN_FAILURE, 0); +} + +static void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) +{ + int port = BP_PORT(bp); + int reg_offset; + u32 val; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + + if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) { + + val = REG_RD(bp, reg_offset); + val &= ~AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("SPIO5 hw attention\n"); + + /* Fan failure attention */ + bnx2x_hw_reset_phy(&bp->link_params); + bnx2x_fan_failure(bp); + } + + if ((attn & bp->link_vars.aeu_int_mask) && bp->port.pmf) { + bnx2x_acquire_phy_lock(bp); + bnx2x_handle_module_detect_int(&bp->link_params); + bnx2x_release_phy_lock(bp); + } + + if (attn & HW_INTERRUT_ASSERT_SET_0) { + + val = REG_RD(bp, reg_offset); + val &= ~(attn & HW_INTERRUT_ASSERT_SET_0); + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("FATAL HW block attention set0 0x%x\n", + (u32)(attn & HW_INTERRUT_ASSERT_SET_0)); + bnx2x_panic(); + } +} + +static void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) { + + val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); + BNX2X_ERR("DB hw attention 0x%x\n", val); + /* DORQ discard attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from DORQ\n"); + } + + if (attn & HW_INTERRUT_ASSERT_SET_1) { + + int port = BP_PORT(bp); + int reg_offset; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1); + + val = REG_RD(bp, reg_offset); + val &= ~(attn & HW_INTERRUT_ASSERT_SET_1); + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("FATAL HW block attention set1 0x%x\n", + (u32)(attn & HW_INTERRUT_ASSERT_SET_1)); + bnx2x_panic(); + } +} + +static void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { + + val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); + BNX2X_ERR("CFC hw attention 0x%x\n", val); + /* CFC error attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from CFC\n"); + } + + if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { + val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); + BNX2X_ERR("PXP hw attention-0 0x%x\n", val); + /* RQ_USDMDP_FIFO_OVERFLOW */ + if (val & 0x18000) + BNX2X_ERR("FATAL error from PXP\n"); + + if (!CHIP_IS_E1x(bp)) { + val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_1); + BNX2X_ERR("PXP hw attention-1 0x%x\n", val); + } + } + + if (attn & HW_INTERRUT_ASSERT_SET_2) { + + int port = BP_PORT(bp); + int reg_offset; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2); + + val = REG_RD(bp, reg_offset); + val &= ~(attn & HW_INTERRUT_ASSERT_SET_2); + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("FATAL HW block attention set2 0x%x\n", + (u32)(attn & HW_INTERRUT_ASSERT_SET_2)); + bnx2x_panic(); + } +} + +static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) { + + if (attn & BNX2X_PMF_LINK_ASSERT) { + int func = BP_FUNC(bp); + + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); + bnx2x_read_mf_cfg(bp); + bp->mf_config[BP_VN(bp)] = MF_CFG_RD(bp, + func_mf_config[BP_ABS_FUNC(bp)].config); + val = SHMEM_RD(bp, + func_mb[BP_FW_MB_IDX(bp)].drv_status); + + if (val & (DRV_STATUS_DCC_EVENT_MASK | + DRV_STATUS_OEM_EVENT_MASK)) + bnx2x_oem_event(bp, + (val & (DRV_STATUS_DCC_EVENT_MASK | + DRV_STATUS_OEM_EVENT_MASK))); + + if (val & DRV_STATUS_SET_MF_BW) + bnx2x_set_mf_bw(bp); + + if (val & DRV_STATUS_DRV_INFO_REQ) + bnx2x_handle_drv_info_req(bp); + + if (val & DRV_STATUS_VF_DISABLED) + bnx2x_schedule_iov_task(bp, + BNX2X_IOV_HANDLE_FLR); + + if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF)) + bnx2x_pmf_update(bp); + + if (bp->port.pmf && + (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) && + bp->dcbx_enabled > 0) + /* start dcbx state machine */ + bnx2x_dcbx_set_params(bp, + BNX2X_DCBX_STATE_NEG_RECEIVED); + if (val & DRV_STATUS_AFEX_EVENT_MASK) + bnx2x_handle_afex_cmd(bp, + val & DRV_STATUS_AFEX_EVENT_MASK); + if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS) + bnx2x_handle_eee_event(bp); + + if (val & DRV_STATUS_OEM_UPDATE_SVID) + bnx2x_handle_update_svid_cmd(bp); + + if (bp->link_vars.periodic_flags & + PERIODIC_FLAGS_LINK_EVENT) { + /* sync with link */ + bnx2x_acquire_phy_lock(bp); + bp->link_vars.periodic_flags &= + ~PERIODIC_FLAGS_LINK_EVENT; + bnx2x_release_phy_lock(bp); + if (IS_MF(bp)) + bnx2x_link_sync_notify(bp); + bnx2x_link_report(bp); + } + /* Always call it here: bnx2x_link_report() will + * prevent the link indication duplication. + */ + bnx2x__link_status_update(bp); + } else if (attn & BNX2X_MC_ASSERT_BITS) { + + BNX2X_ERR("MC assert!\n"); + bnx2x_mc_assert(bp); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0); + bnx2x_panic(); + + } else if (attn & BNX2X_MCP_ASSERT) { + + BNX2X_ERR("MCP assert!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0); + bnx2x_fw_dump(bp); + + } else + BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn); + } + + if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) { + BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn); + if (attn & BNX2X_GRC_TIMEOUT) { + val = CHIP_IS_E1(bp) ? 0 : + REG_RD(bp, MISC_REG_GRC_TIMEOUT_ATTN); + BNX2X_ERR("GRC time-out 0x%08x\n", val); + } + if (attn & BNX2X_GRC_RSV) { + val = CHIP_IS_E1(bp) ? 0 : + REG_RD(bp, MISC_REG_GRC_RSV_ATTN); + BNX2X_ERR("GRC reserved 0x%08x\n", val); + } + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff); + } +} + +/* + * Bits map: + * 0-7 - Engine0 load counter. + * 8-15 - Engine1 load counter. + * 16 - Engine0 RESET_IN_PROGRESS bit. + * 17 - Engine1 RESET_IN_PROGRESS bit. + * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active function + * on the engine + * 19 - Engine1 ONE_IS_LOADED. + * 20 - Chip reset flow bit. When set none-leader must wait for both engines + * leader to complete (check for both RESET_IN_PROGRESS bits and not for + * just the one belonging to its engine). + * + */ +#define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1 + +#define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff +#define BNX2X_PATH0_LOAD_CNT_SHIFT 0 +#define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00 +#define BNX2X_PATH1_LOAD_CNT_SHIFT 8 +#define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000 +#define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000 +#define BNX2X_GLOBAL_RESET_BIT 0x00040000 + +/* + * Set the GLOBAL_RESET bit. + * + * Should be run under rtnl lock + */ +void bnx2x_set_reset_global(struct bnx2x *bp) +{ + u32 val; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); +} + +/* + * Clear the GLOBAL_RESET bit. + * + * Should be run under rtnl lock + */ +static void bnx2x_clear_reset_global(struct bnx2x *bp) +{ + u32 val; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT)); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); +} + +/* + * Checks the GLOBAL_RESET bit. + * + * should be run under rtnl lock + */ +static bool bnx2x_reset_is_global(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + DP(NETIF_MSG_HW, "GEN_REG_VAL=0x%08x\n", val); + return (val & BNX2X_GLOBAL_RESET_BIT) ? true : false; +} + +/* + * Clear RESET_IN_PROGRESS bit for the current engine. + * + * Should be run under rtnl lock + */ +static void bnx2x_set_reset_done(struct bnx2x *bp) +{ + u32 val; + u32 bit = BP_PATH(bp) ? + BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + /* Clear the bit */ + val &= ~bit; + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); +} + +/* + * Set RESET_IN_PROGRESS for the current engine. + * + * should be run under rtnl lock + */ +void bnx2x_set_reset_in_progress(struct bnx2x *bp) +{ + u32 val; + u32 bit = BP_PATH(bp) ? + BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + /* Set the bit */ + val |= bit; + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); +} + +/* + * Checks the RESET_IN_PROGRESS bit for the given engine. + * should be run under rtnl lock + */ +bool bnx2x_reset_is_done(struct bnx2x *bp, int engine) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 bit = engine ? + BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + + /* return false if bit is set */ + return (val & bit) ? false : true; +} + +/* + * set pf load for the current pf. + * + * should be run under rtnl lock + */ +void bnx2x_set_pf_load(struct bnx2x *bp) +{ + u32 val1, val; + u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : + BNX2X_PATH0_LOAD_CNT_MASK; + u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : + BNX2X_PATH0_LOAD_CNT_SHIFT; + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + DP(NETIF_MSG_IFUP, "Old GEN_REG_VAL=0x%08x\n", val); + + /* get the current counter value */ + val1 = (val & mask) >> shift; + + /* set bit of that PF */ + val1 |= (1 << bp->pf_num); + + /* clear the old value */ + val &= ~mask; + + /* set the new one */ + val |= ((val1 << shift) & mask); + + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); +} + +/** + * bnx2x_clear_pf_load - clear pf load mark + * + * @bp: driver handle + * + * Should be run under rtnl lock. + * Decrements the load counter for the current engine. Returns + * whether other functions are still loaded + */ +bool bnx2x_clear_pf_load(struct bnx2x *bp) +{ + u32 val1, val; + u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : + BNX2X_PATH0_LOAD_CNT_MASK; + u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : + BNX2X_PATH0_LOAD_CNT_SHIFT; + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + DP(NETIF_MSG_IFDOWN, "Old GEN_REG_VAL=0x%08x\n", val); + + /* get the current counter value */ + val1 = (val & mask) >> shift; + + /* clear bit of that PF */ + val1 &= ~(1 << bp->pf_num); + + /* clear the old value */ + val &= ~mask; + + /* set the new one */ + val |= ((val1 << shift) & mask); + + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + return val1 != 0; +} + +/* + * Read the load status for the current engine. + * + * should be run under rtnl lock + */ +static bool bnx2x_get_load_status(struct bnx2x *bp, int engine) +{ + u32 mask = (engine ? BNX2X_PATH1_LOAD_CNT_MASK : + BNX2X_PATH0_LOAD_CNT_MASK); + u32 shift = (engine ? BNX2X_PATH1_LOAD_CNT_SHIFT : + BNX2X_PATH0_LOAD_CNT_SHIFT); + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "GLOB_REG=0x%08x\n", val); + + val = (val & mask) >> shift; + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "load mask for engine %d = 0x%x\n", + engine, val); + + return val != 0; +} + +static void _print_parity(struct bnx2x *bp, u32 reg) +{ + pr_cont(" [0x%08x] ", REG_RD(bp, reg)); +} + +static void _print_next_block(int idx, const char *blk) +{ + pr_cont("%s%s", idx ? ", " : "", blk); +} + +static bool bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig, + int *par_num, bool print) +{ + u32 cur_bit; + bool res; + int i; + + res = false; + + for (i = 0; sig; i++) { + cur_bit = (0x1UL << i); + if (sig & cur_bit) { + res |= true; /* Each bit is real error! */ + + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR: + _print_next_block((*par_num)++, "BRB"); + _print_parity(bp, + BRB1_REG_BRB1_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR: + _print_next_block((*par_num)++, + "PARSER"); + _print_parity(bp, PRS_REG_PRS_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR: + _print_next_block((*par_num)++, "TSDM"); + _print_parity(bp, + TSDM_REG_TSDM_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR: + _print_next_block((*par_num)++, + "SEARCHER"); + _print_parity(bp, SRC_REG_SRC_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR: + _print_next_block((*par_num)++, "TCM"); + _print_parity(bp, TCM_REG_TCM_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR: + _print_next_block((*par_num)++, + "TSEMI"); + _print_parity(bp, + TSEM_REG_TSEM_PRTY_STS_0); + _print_parity(bp, + TSEM_REG_TSEM_PRTY_STS_1); + break; + case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR: + _print_next_block((*par_num)++, "XPB"); + _print_parity(bp, GRCBASE_XPB + + PB_REG_PB_PRTY_STS); + break; + } + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return res; +} + +static bool bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, + int *par_num, bool *global, + bool print) +{ + u32 cur_bit; + bool res; + int i; + + res = false; + + for (i = 0; sig; i++) { + cur_bit = (0x1UL << i); + if (sig & cur_bit) { + res |= true; /* Each bit is real error! */ + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "PBF"); + _print_parity(bp, PBF_REG_PBF_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "QM"); + _print_parity(bp, QM_REG_QM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "TM"); + _print_parity(bp, TM_REG_TM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "XSDM"); + _print_parity(bp, + XSDM_REG_XSDM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "XCM"); + _print_parity(bp, XCM_REG_XCM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, + "XSEMI"); + _print_parity(bp, + XSEM_REG_XSEM_PRTY_STS_0); + _print_parity(bp, + XSEM_REG_XSEM_PRTY_STS_1); + } + break; + case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, + "DOORBELLQ"); + _print_parity(bp, + DORQ_REG_DORQ_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "NIG"); + if (CHIP_IS_E1x(bp)) { + _print_parity(bp, + NIG_REG_NIG_PRTY_STS); + } else { + _print_parity(bp, + NIG_REG_NIG_PRTY_STS_0); + _print_parity(bp, + NIG_REG_NIG_PRTY_STS_1); + } + } + break; + case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR: + if (print) + _print_next_block((*par_num)++, + "VAUX PCI CORE"); + *global = true; + break; + case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, + "DEBUG"); + _print_parity(bp, DBG_REG_DBG_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "USDM"); + _print_parity(bp, + USDM_REG_USDM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "UCM"); + _print_parity(bp, UCM_REG_UCM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, + "USEMI"); + _print_parity(bp, + USEM_REG_USEM_PRTY_STS_0); + _print_parity(bp, + USEM_REG_USEM_PRTY_STS_1); + } + break; + case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "UPB"); + _print_parity(bp, GRCBASE_UPB + + PB_REG_PB_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "CSDM"); + _print_parity(bp, + CSDM_REG_CSDM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "CCM"); + _print_parity(bp, CCM_REG_CCM_PRTY_STS); + } + break; + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return res; +} + +static bool bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig, + int *par_num, bool print) +{ + u32 cur_bit; + bool res; + int i; + + res = false; + + for (i = 0; sig; i++) { + cur_bit = (0x1UL << i); + if (sig & cur_bit) { + res = true; /* Each bit is real error! */ + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR: + _print_next_block((*par_num)++, + "CSEMI"); + _print_parity(bp, + CSEM_REG_CSEM_PRTY_STS_0); + _print_parity(bp, + CSEM_REG_CSEM_PRTY_STS_1); + break; + case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR: + _print_next_block((*par_num)++, "PXP"); + _print_parity(bp, PXP_REG_PXP_PRTY_STS); + _print_parity(bp, + PXP2_REG_PXP2_PRTY_STS_0); + _print_parity(bp, + PXP2_REG_PXP2_PRTY_STS_1); + break; + case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR: + _print_next_block((*par_num)++, + "PXPPCICLOCKCLIENT"); + break; + case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR: + _print_next_block((*par_num)++, "CFC"); + _print_parity(bp, + CFC_REG_CFC_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR: + _print_next_block((*par_num)++, "CDU"); + _print_parity(bp, CDU_REG_CDU_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR: + _print_next_block((*par_num)++, "DMAE"); + _print_parity(bp, + DMAE_REG_DMAE_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR: + _print_next_block((*par_num)++, "IGU"); + if (CHIP_IS_E1x(bp)) + _print_parity(bp, + HC_REG_HC_PRTY_STS); + else + _print_parity(bp, + IGU_REG_IGU_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR: + _print_next_block((*par_num)++, "MISC"); + _print_parity(bp, + MISC_REG_MISC_PRTY_STS); + break; + } + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return res; +} + +static bool bnx2x_check_blocks_with_parity3(struct bnx2x *bp, u32 sig, + int *par_num, bool *global, + bool print) +{ + bool res = false; + u32 cur_bit; + int i; + + for (i = 0; sig; i++) { + cur_bit = (0x1UL << i); + if (sig & cur_bit) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY: + if (print) + _print_next_block((*par_num)++, + "MCP ROM"); + *global = true; + res = true; + break; + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY: + if (print) + _print_next_block((*par_num)++, + "MCP UMP RX"); + *global = true; + res = true; + break; + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY: + if (print) + _print_next_block((*par_num)++, + "MCP UMP TX"); + *global = true; + res = true; + break; + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY: + if (print) + _print_next_block((*par_num)++, + "MCP SCPAD"); + /* clear latched SCPAD PATIRY from MCP */ + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, + 1UL << 10); + break; + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return res; +} + +static bool bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig, + int *par_num, bool print) +{ + u32 cur_bit; + bool res; + int i; + + res = false; + + for (i = 0; sig; i++) { + cur_bit = (0x1UL << i); + if (sig & cur_bit) { + res = true; /* Each bit is real error! */ + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR: + _print_next_block((*par_num)++, + "PGLUE_B"); + _print_parity(bp, + PGLUE_B_REG_PGLUE_B_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR: + _print_next_block((*par_num)++, "ATC"); + _print_parity(bp, + ATC_REG_ATC_PRTY_STS); + break; + } + } + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return res; +} + +static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print, + u32 *sig) +{ + bool res = false; + + if ((sig[0] & HW_PRTY_ASSERT_SET_0) || + (sig[1] & HW_PRTY_ASSERT_SET_1) || + (sig[2] & HW_PRTY_ASSERT_SET_2) || + (sig[3] & HW_PRTY_ASSERT_SET_3) || + (sig[4] & HW_PRTY_ASSERT_SET_4)) { + int par_num = 0; + DP(NETIF_MSG_HW, "Was parity error: HW block parity attention:\n" + "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x\n", + sig[0] & HW_PRTY_ASSERT_SET_0, + sig[1] & HW_PRTY_ASSERT_SET_1, + sig[2] & HW_PRTY_ASSERT_SET_2, + sig[3] & HW_PRTY_ASSERT_SET_3, + sig[4] & HW_PRTY_ASSERT_SET_4); + if (print) + netdev_err(bp->dev, + "Parity errors detected in blocks: "); + res |= bnx2x_check_blocks_with_parity0(bp, + sig[0] & HW_PRTY_ASSERT_SET_0, &par_num, print); + res |= bnx2x_check_blocks_with_parity1(bp, + sig[1] & HW_PRTY_ASSERT_SET_1, &par_num, global, print); + res |= bnx2x_check_blocks_with_parity2(bp, + sig[2] & HW_PRTY_ASSERT_SET_2, &par_num, print); + res |= bnx2x_check_blocks_with_parity3(bp, + sig[3] & HW_PRTY_ASSERT_SET_3, &par_num, global, print); + res |= bnx2x_check_blocks_with_parity4(bp, + sig[4] & HW_PRTY_ASSERT_SET_4, &par_num, print); + + if (print) + pr_cont("\n"); + } + + return res; +} + +/** + * bnx2x_chk_parity_attn - checks for parity attentions. + * + * @bp: driver handle + * @global: true if there was a global attention + * @print: show parity attention in syslog + */ +bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print) +{ + struct attn_route attn = { {0} }; + int port = BP_PORT(bp); + + attn.sig[0] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + + port*4); + attn.sig[1] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + + port*4); + attn.sig[2] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + + port*4); + attn.sig[3] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + + port*4); + /* Since MCP attentions can't be disabled inside the block, we need to + * read AEU registers to see whether they're currently disabled + */ + attn.sig[3] &= ((REG_RD(bp, + !port ? MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 + : MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0) & + MISC_AEU_ENABLE_MCP_PRTY_BITS) | + ~MISC_AEU_ENABLE_MCP_PRTY_BITS); + + if (!CHIP_IS_E1x(bp)) + attn.sig[4] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + + port*4); + + return bnx2x_parity_attn(bp, global, print, attn.sig); +} + +static void bnx2x_attn_int_deasserted4(struct bnx2x *bp, u32 attn) +{ + u32 val; + if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) { + + val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS_CLR); + BNX2X_ERR("PGLUE hw attention 0x%x\n", val); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN\n"); + if (val & + PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN\n"); + if (val & + PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW\n"); + } + if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) { + val = REG_RD(bp, ATC_REG_ATC_INT_STS_CLR); + BNX2X_ERR("ATC hw attention 0x%x\n", val); + if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU\n"); + } + + if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | + AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) { + BNX2X_ERR("FATAL parity attention set4 0x%x\n", + (u32)(attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | + AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR))); + } +} + +static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) +{ + struct attn_route attn, *group_mask; + int port = BP_PORT(bp); + int index; + u32 reg_addr; + u32 val; + u32 aeu_mask; + bool global = false; + + /* need to take HW lock because MCP or other port might also + try to handle this event */ + bnx2x_acquire_alr(bp); + + if (bnx2x_chk_parity_attn(bp, &global, true)) { +#ifndef BNX2X_STOP_ON_ERROR + bp->recovery_state = BNX2X_RECOVERY_INIT; + schedule_delayed_work(&bp->sp_rtnl_task, 0); + /* Disable HW interrupts */ + bnx2x_int_disable(bp); + /* In case of parity errors don't handle attentions so that + * other function would "see" parity errors. + */ +#else + bnx2x_panic(); +#endif + bnx2x_release_alr(bp); + return; + } + + attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4); + attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4); + attn.sig[2] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4); + attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4); + if (!CHIP_IS_E1x(bp)) + attn.sig[4] = + REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4); + else + attn.sig[4] = 0; + + DP(NETIF_MSG_HW, "attn: %08x %08x %08x %08x %08x\n", + attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3], attn.sig[4]); + + for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) { + if (deasserted & (1 << index)) { + group_mask = &bp->attn_group[index]; + + DP(NETIF_MSG_HW, "group[%d]: %08x %08x %08x %08x %08x\n", + index, + group_mask->sig[0], group_mask->sig[1], + group_mask->sig[2], group_mask->sig[3], + group_mask->sig[4]); + + bnx2x_attn_int_deasserted4(bp, + attn.sig[4] & group_mask->sig[4]); + bnx2x_attn_int_deasserted3(bp, + attn.sig[3] & group_mask->sig[3]); + bnx2x_attn_int_deasserted1(bp, + attn.sig[1] & group_mask->sig[1]); + bnx2x_attn_int_deasserted2(bp, + attn.sig[2] & group_mask->sig[2]); + bnx2x_attn_int_deasserted0(bp, + attn.sig[0] & group_mask->sig[0]); + } + } + + bnx2x_release_alr(bp); + + if (bp->common.int_block == INT_BLOCK_HC) + reg_addr = (HC_REG_COMMAND_REG + port*32 + + COMMAND_REG_ATTN_BITS_CLR); + else + reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER*8); + + val = ~deasserted; + DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", val, + (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr); + REG_WR(bp, reg_addr, val); + + if (~bp->attn_state & deasserted) + BNX2X_ERR("IGU ERROR\n"); + + reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0; + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + aeu_mask = REG_RD(bp, reg_addr); + + DP(NETIF_MSG_HW, "aeu_mask %x newly deasserted %x\n", + aeu_mask, deasserted); + aeu_mask |= (deasserted & 0x3ff); + DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask); + + REG_WR(bp, reg_addr, aeu_mask); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + + DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state); + bp->attn_state &= ~deasserted; + DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state); +} + +static void bnx2x_attn_int(struct bnx2x *bp) +{ + /* read local copy of bits */ + u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block. + attn_bits); + u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block. + attn_bits_ack); + u32 attn_state = bp->attn_state; + + /* look for changed bits */ + u32 asserted = attn_bits & ~attn_ack & ~attn_state; + u32 deasserted = ~attn_bits & attn_ack & attn_state; + + DP(NETIF_MSG_HW, + "attn_bits %x attn_ack %x asserted %x deasserted %x\n", + attn_bits, attn_ack, asserted, deasserted); + + if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) + BNX2X_ERR("BAD attention state\n"); + + /* handle bits that were raised */ + if (asserted) + bnx2x_attn_int_asserted(bp, asserted); + + if (deasserted) + bnx2x_attn_int_deasserted(bp, deasserted); +} + +void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment, + u16 index, u8 op, u8 update) +{ + u32 igu_addr = bp->igu_base_addr; + igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8; + bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update, + igu_addr); +} + +static void bnx2x_update_eq_prod(struct bnx2x *bp, u16 prod) +{ + /* No memory barriers */ + storm_memset_eq_prod(bp, prod, BP_FUNC(bp)); + mmiowb(); /* keep prod updates ordered */ +} + +static int bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid, + union event_ring_elem *elem) +{ + u8 err = elem->message.error; + + if (!bp->cnic_eth_dev.starting_cid || + (cid < bp->cnic_eth_dev.starting_cid && + cid != bp->cnic_eth_dev.iscsi_l2_cid)) + return 1; + + DP(BNX2X_MSG_SP, "got delete ramrod for CNIC CID %d\n", cid); + + if (unlikely(err)) { + + BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n", + cid); + bnx2x_panic_dump(bp, false); + } + bnx2x_cnic_cfc_comp(bp, cid, err); + return 0; +} + +static void bnx2x_handle_mcast_eqe(struct bnx2x *bp) +{ + struct bnx2x_mcast_ramrod_params rparam; + int rc; + + memset(&rparam, 0, sizeof(rparam)); + + rparam.mcast_obj = &bp->mcast_obj; + + netif_addr_lock_bh(bp->dev); + + /* Clear pending state for the last command */ + bp->mcast_obj.raw.clear_pending(&bp->mcast_obj.raw); + + /* If there are pending mcast commands - send them */ + if (bp->mcast_obj.check_pending(&bp->mcast_obj)) { + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); + if (rc < 0) + BNX2X_ERR("Failed to send pending mcast commands: %d\n", + rc); + } + + netif_addr_unlock_bh(bp->dev); +} + +static void bnx2x_handle_classification_eqe(struct bnx2x *bp, + union event_ring_elem *elem) +{ + unsigned long ramrod_flags = 0; + int rc = 0; + u32 cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK; + struct bnx2x_vlan_mac_obj *vlan_mac_obj; + + /* Always push next commands out, don't wait here */ + __set_bit(RAMROD_CONT, &ramrod_flags); + + switch (le32_to_cpu((__force __le32)elem->message.data.eth_event.echo) + >> BNX2X_SWCID_SHIFT) { + case BNX2X_FILTER_MAC_PENDING: + DP(BNX2X_MSG_SP, "Got SETUP_MAC completions\n"); + if (CNIC_LOADED(bp) && (cid == BNX2X_ISCSI_ETH_CID(bp))) + vlan_mac_obj = &bp->iscsi_l2_mac_obj; + else + vlan_mac_obj = &bp->sp_objs[cid].mac_obj; + + break; + case BNX2X_FILTER_MCAST_PENDING: + DP(BNX2X_MSG_SP, "Got SETUP_MCAST completions\n"); + /* This is only relevant for 57710 where multicast MACs are + * configured as unicast MACs using the same ramrod. + */ + bnx2x_handle_mcast_eqe(bp); + return; + default: + BNX2X_ERR("Unsupported classification command: %d\n", + elem->message.data.eth_event.echo); + return; + } + + rc = vlan_mac_obj->complete(bp, vlan_mac_obj, elem, &ramrod_flags); + + if (rc < 0) + BNX2X_ERR("Failed to schedule new commands: %d\n", rc); + else if (rc > 0) + DP(BNX2X_MSG_SP, "Scheduled next pending commands...\n"); +} + +static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start); + +static void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp) +{ + netif_addr_lock_bh(bp->dev); + + clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state); + + /* Send rx_mode command again if was requested */ + if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state)) + bnx2x_set_storm_rx_mode(bp); + else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, + &bp->sp_state)) + bnx2x_set_iscsi_eth_rx_mode(bp, true); + else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, + &bp->sp_state)) + bnx2x_set_iscsi_eth_rx_mode(bp, false); + + netif_addr_unlock_bh(bp->dev); +} + +static void bnx2x_after_afex_vif_lists(struct bnx2x *bp, + union event_ring_elem *elem) +{ + if (elem->message.data.vif_list_event.echo == VIF_LIST_RULE_GET) { + DP(BNX2X_MSG_SP, + "afex: ramrod completed VIF LIST_GET, addrs 0x%x\n", + elem->message.data.vif_list_event.func_bit_map); + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTGET_ACK, + elem->message.data.vif_list_event.func_bit_map); + } else if (elem->message.data.vif_list_event.echo == + VIF_LIST_RULE_SET) { + DP(BNX2X_MSG_SP, "afex: ramrod completed VIF LIST_SET\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTSET_ACK, 0); + } +} + +/* called with rtnl_lock */ +static void bnx2x_after_function_update(struct bnx2x *bp) +{ + int q, rc; + struct bnx2x_fastpath *fp; + struct bnx2x_queue_state_params queue_params = {NULL}; + struct bnx2x_queue_update_params *q_update_params = + &queue_params.params.update; + + /* Send Q update command with afex vlan removal values for all Qs */ + queue_params.cmd = BNX2X_Q_CMD_UPDATE; + + /* set silent vlan removal values according to vlan mode */ + __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, + &q_update_params->update_flags); + __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, + &q_update_params->update_flags); + __set_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags); + + /* in access mode mark mask and value are 0 to strip all vlans */ + if (bp->afex_vlan_mode == FUNC_MF_CFG_AFEX_VLAN_ACCESS_MODE) { + q_update_params->silent_removal_value = 0; + q_update_params->silent_removal_mask = 0; + } else { + q_update_params->silent_removal_value = + (bp->afex_def_vlan_tag & VLAN_VID_MASK); + q_update_params->silent_removal_mask = VLAN_VID_MASK; + } + + for_each_eth_queue(bp, q) { + /* Set the appropriate Queue object */ + fp = &bp->fp[q]; + queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + + /* send the ramrod */ + rc = bnx2x_queue_state_change(bp, &queue_params); + if (rc < 0) + BNX2X_ERR("Failed to config silent vlan rem for Q %d\n", + q); + } + + if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) { + fp = &bp->fp[FCOE_IDX(bp)]; + queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + + /* clear pending completion bit */ + __clear_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags); + + /* mark latest Q bit */ + smp_mb__before_atomic(); + set_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state); + smp_mb__after_atomic(); + + /* send Q update ramrod for FCoE Q */ + rc = bnx2x_queue_state_change(bp, &queue_params); + if (rc < 0) + BNX2X_ERR("Failed to config silent vlan rem for Q %d\n", + q); + } else { + /* If no FCoE ring - ACK MCP now */ + bnx2x_link_report(bp); + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); + } +} + +static struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj( + struct bnx2x *bp, u32 cid) +{ + DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid); + + if (CNIC_LOADED(bp) && (cid == BNX2X_FCOE_ETH_CID(bp))) + return &bnx2x_fcoe_sp_obj(bp, q_obj); + else + return &bp->sp_objs[CID_TO_FP(cid, bp)].q_obj; +} + +static void bnx2x_eq_int(struct bnx2x *bp) +{ + u16 hw_cons, sw_cons, sw_prod; + union event_ring_elem *elem; + u8 echo; + u32 cid; + u8 opcode; + int rc, spqe_cnt = 0; + struct bnx2x_queue_sp_obj *q_obj; + struct bnx2x_func_sp_obj *f_obj = &bp->func_obj; + struct bnx2x_raw_obj *rss_raw = &bp->rss_conf_obj.raw; + + hw_cons = le16_to_cpu(*bp->eq_cons_sb); + + /* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256. + * when we get the next-page we need to adjust so the loop + * condition below will be met. The next element is the size of a + * regular element and hence incrementing by 1 + */ + if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) + hw_cons++; + + /* This function may never run in parallel with itself for a + * specific bp, thus there is no need in "paired" read memory + * barrier here. + */ + sw_cons = bp->eq_cons; + sw_prod = bp->eq_prod; + + DP(BNX2X_MSG_SP, "EQ: hw_cons %u sw_cons %u bp->eq_spq_left %x\n", + hw_cons, sw_cons, atomic_read(&bp->eq_spq_left)); + + for (; sw_cons != hw_cons; + sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) { + + elem = &bp->eq_ring[EQ_DESC(sw_cons)]; + + rc = bnx2x_iov_eq_sp_event(bp, elem); + if (!rc) { + DP(BNX2X_MSG_IOV, "bnx2x_iov_eq_sp_event returned %d\n", + rc); + goto next_spqe; + } + + /* elem CID originates from FW; actually LE */ + cid = SW_CID((__force __le32) + elem->message.data.cfc_del_event.cid); + opcode = elem->message.opcode; + + /* handle eq element */ + switch (opcode) { + case EVENT_RING_OPCODE_VF_PF_CHANNEL: + bnx2x_vf_mbx_schedule(bp, + &elem->message.data.vf_pf_event); + continue; + + case EVENT_RING_OPCODE_STAT_QUERY: + DP_AND((BNX2X_MSG_SP | BNX2X_MSG_STATS), + "got statistics comp event %d\n", + bp->stats_comp++); + /* nothing to do with stats comp */ + goto next_spqe; + + case EVENT_RING_OPCODE_CFC_DEL: + /* handle according to cid range */ + /* + * we may want to verify here that the bp state is + * HALTING + */ + DP(BNX2X_MSG_SP, + "got delete ramrod for MULTI[%d]\n", cid); + + if (CNIC_LOADED(bp) && + !bnx2x_cnic_handle_cfc_del(bp, cid, elem)) + goto next_spqe; + + q_obj = bnx2x_cid_to_q_obj(bp, cid); + + if (q_obj->complete_cmd(bp, q_obj, BNX2X_Q_CMD_CFC_DEL)) + break; + + goto next_spqe; + + case EVENT_RING_OPCODE_STOP_TRAFFIC: + DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got STOP TRAFFIC\n"); + bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED); + if (f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_TX_STOP)) + break; + goto next_spqe; + + case EVENT_RING_OPCODE_START_TRAFFIC: + DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got START TRAFFIC\n"); + bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED); + if (f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_TX_START)) + break; + goto next_spqe; + + case EVENT_RING_OPCODE_FUNCTION_UPDATE: + echo = elem->message.data.function_update_event.echo; + if (echo == SWITCH_UPDATE) { + DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, + "got FUNC_SWITCH_UPDATE ramrod\n"); + if (f_obj->complete_cmd( + bp, f_obj, BNX2X_F_CMD_SWITCH_UPDATE)) + break; + + } else { + int cmd = BNX2X_SP_RTNL_AFEX_F_UPDATE; + + DP(BNX2X_MSG_SP | BNX2X_MSG_MCP, + "AFEX: ramrod completed FUNCTION_UPDATE\n"); + f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_AFEX_UPDATE); + + /* We will perform the Queues update from + * sp_rtnl task as all Queue SP operations + * should run under rtnl_lock. + */ + bnx2x_schedule_sp_rtnl(bp, cmd, 0); + } + + goto next_spqe; + + case EVENT_RING_OPCODE_AFEX_VIF_LISTS: + f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_AFEX_VIFLISTS); + bnx2x_after_afex_vif_lists(bp, elem); + goto next_spqe; + case EVENT_RING_OPCODE_FUNCTION_START: + DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, + "got FUNC_START ramrod\n"); + if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_START)) + break; + + goto next_spqe; + + case EVENT_RING_OPCODE_FUNCTION_STOP: + DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, + "got FUNC_STOP ramrod\n"); + if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_STOP)) + break; + + goto next_spqe; + + case EVENT_RING_OPCODE_SET_TIMESYNC: + DP(BNX2X_MSG_SP | BNX2X_MSG_PTP, + "got set_timesync ramrod completion\n"); + if (f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_SET_TIMESYNC)) + break; + goto next_spqe; + } + + switch (opcode | bp->state) { + case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | + BNX2X_STATE_OPENING_WAIT4_PORT): + cid = elem->message.data.eth_event.echo & + BNX2X_SWCID_MASK; + DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n", + cid); + rss_raw->clear_pending(rss_raw); + break; + + case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_SET_MAC | + BNX2X_STATE_CLOSING_WAIT4_HALT): + case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | + BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | + BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(BNX2X_MSG_SP, "got (un)set mac ramrod\n"); + bnx2x_handle_classification_eqe(bp, elem); + break; + + case (EVENT_RING_OPCODE_MULTICAST_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_MULTICAST_RULES | + BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_MULTICAST_RULES | + BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(BNX2X_MSG_SP, "got mcast ramrod\n"); + bnx2x_handle_mcast_eqe(bp); + break; + + case (EVENT_RING_OPCODE_FILTERS_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_FILTERS_RULES | + BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_FILTERS_RULES | + BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(BNX2X_MSG_SP, "got rx_mode ramrod\n"); + bnx2x_handle_rx_mode_eqe(bp); + break; + default: + /* unknown event log error and continue */ + BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n", + elem->message.opcode, bp->state); + } +next_spqe: + spqe_cnt++; + } /* for */ + + smp_mb__before_atomic(); + atomic_add(spqe_cnt, &bp->eq_spq_left); + + bp->eq_cons = sw_cons; + bp->eq_prod = sw_prod; + /* Make sure that above mem writes were issued towards the memory */ + smp_wmb(); + + /* update producer */ + bnx2x_update_eq_prod(bp, bp->eq_prod); +} + +static void bnx2x_sp_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work); + + DP(BNX2X_MSG_SP, "sp task invoked\n"); + + /* make sure the atomic interrupt_occurred has been written */ + smp_rmb(); + if (atomic_read(&bp->interrupt_occurred)) { + + /* what work needs to be performed? */ + u16 status = bnx2x_update_dsb_idx(bp); + + DP(BNX2X_MSG_SP, "status %x\n", status); + DP(BNX2X_MSG_SP, "setting interrupt_occurred to 0\n"); + atomic_set(&bp->interrupt_occurred, 0); + + /* HW attentions */ + if (status & BNX2X_DEF_SB_ATT_IDX) { + bnx2x_attn_int(bp); + status &= ~BNX2X_DEF_SB_ATT_IDX; + } + + /* SP events: STAT_QUERY and others */ + if (status & BNX2X_DEF_SB_IDX) { + struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); + + if (FCOE_INIT(bp) && + (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) { + /* Prevent local bottom-halves from running as + * we are going to change the local NAPI list. + */ + local_bh_disable(); + napi_schedule(&bnx2x_fcoe(bp, napi)); + local_bh_enable(); + } + + /* Handle EQ completions */ + bnx2x_eq_int(bp); + bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, + le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1); + + status &= ~BNX2X_DEF_SB_IDX; + } + + /* if status is non zero then perhaps something went wrong */ + if (unlikely(status)) + DP(BNX2X_MSG_SP, + "got an unknown interrupt! (status 0x%x)\n", status); + + /* ack status block only if something was actually handled */ + bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID, + le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1); + } + + /* afex - poll to check if VIFSET_ACK should be sent to MFW */ + if (test_and_clear_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, + &bp->sp_state)) { + bnx2x_link_report(bp); + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); + } +} + +irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct bnx2x *bp = netdev_priv(dev); + + bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, + IGU_INT_DISABLE, 0); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return IRQ_HANDLED; +#endif + + if (CNIC_LOADED(bp)) { + struct cnic_ops *c_ops; + + rcu_read_lock(); + c_ops = rcu_dereference(bp->cnic_ops); + if (c_ops) + c_ops->cnic_handler(bp->cnic_data, NULL); + rcu_read_unlock(); + } + + /* schedule sp task to perform default status block work, ack + * attentions and enable interrupts. + */ + bnx2x_schedule_sp_task(bp); + + return IRQ_HANDLED; +} + +/* end of slow path */ + +void bnx2x_drv_pulse(struct bnx2x *bp) +{ + SHMEM_WR(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb, + bp->fw_drv_pulse_wr_seq); +} + +static void bnx2x_timer(unsigned long data) +{ + struct bnx2x *bp = (struct bnx2x *) data; + + if (!netif_running(bp->dev)) + return; + + if (IS_PF(bp) && + !BP_NOMCP(bp)) { + int mb_idx = BP_FW_MB_IDX(bp); + u16 drv_pulse; + u16 mcp_pulse; + + ++bp->fw_drv_pulse_wr_seq; + bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; + drv_pulse = bp->fw_drv_pulse_wr_seq; + bnx2x_drv_pulse(bp); + + mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) & + MCP_PULSE_SEQ_MASK); + /* The delta between driver pulse and mcp response + * should not get too big. If the MFW is more than 5 pulses + * behind, we should worry about it enough to generate an error + * log. + */ + if (((drv_pulse - mcp_pulse) & MCP_PULSE_SEQ_MASK) > 5) + BNX2X_ERR("MFW seems hanged: drv_pulse (0x%x) != mcp_pulse (0x%x)\n", + drv_pulse, mcp_pulse); + } + + if (bp->state == BNX2X_STATE_OPEN) + bnx2x_stats_handle(bp, STATS_EVENT_UPDATE); + + /* sample pf vf bulletin board for new posts from pf */ + if (IS_VF(bp)) + bnx2x_timer_sriov(bp); + + mod_timer(&bp->timer, jiffies + bp->current_interval); +} + +/* end of Statistics */ + +/* nic init */ + +/* + * nic init service functions + */ + +static void bnx2x_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) +{ + u32 i; + if (!(len%4) && !(addr%4)) + for (i = 0; i < len; i += 4) + REG_WR(bp, addr + i, fill); + else + for (i = 0; i < len; i++) + REG_WR8(bp, addr + i, fill); +} + +/* helper: writes FP SP data to FW - data_size in dwords */ +static void bnx2x_wr_fp_sb_data(struct bnx2x *bp, + int fw_sb_id, + u32 *sb_data_p, + u32 data_size) +{ + int index; + for (index = 0; index < data_size; index++) + REG_WR(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) + + sizeof(u32)*index, + *(sb_data_p + index)); +} + +static void bnx2x_zero_fp_sb(struct bnx2x *bp, int fw_sb_id) +{ + u32 *sb_data_p; + u32 data_size = 0; + struct hc_status_block_data_e2 sb_data_e2; + struct hc_status_block_data_e1x sb_data_e1x; + + /* disable the function first */ + if (!CHIP_IS_E1x(bp)) { + memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2)); + sb_data_e2.common.state = SB_DISABLED; + sb_data_e2.common.p_func.vf_valid = false; + sb_data_p = (u32 *)&sb_data_e2; + data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); + } else { + memset(&sb_data_e1x, 0, + sizeof(struct hc_status_block_data_e1x)); + sb_data_e1x.common.state = SB_DISABLED; + sb_data_e1x.common.p_func.vf_valid = false; + sb_data_p = (u32 *)&sb_data_e1x; + data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); + } + bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); + + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id), 0, + CSTORM_STATUS_BLOCK_SIZE); + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id), 0, + CSTORM_SYNC_BLOCK_SIZE); +} + +/* helper: writes SP SB data to FW */ +static void bnx2x_wr_sp_sb_data(struct bnx2x *bp, + struct hc_sp_status_block_data *sp_sb_data) +{ + int func = BP_FUNC(bp); + int i; + for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++) + REG_WR(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) + + i*sizeof(u32), + *((u32 *)sp_sb_data + i)); +} + +static void bnx2x_zero_sp_sb(struct bnx2x *bp) +{ + int func = BP_FUNC(bp); + struct hc_sp_status_block_data sp_sb_data; + memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data)); + + sp_sb_data.state = SB_DISABLED; + sp_sb_data.p_func.vf_valid = false; + + bnx2x_wr_sp_sb_data(bp, &sp_sb_data); + + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_STATUS_BLOCK_OFFSET(func), 0, + CSTORM_SP_STATUS_BLOCK_SIZE); + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_SYNC_BLOCK_OFFSET(func), 0, + CSTORM_SP_SYNC_BLOCK_SIZE); +} + +static void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, + int igu_sb_id, int igu_seg_id) +{ + hc_sm->igu_sb_id = igu_sb_id; + hc_sm->igu_seg_id = igu_seg_id; + hc_sm->timer_value = 0xFF; + hc_sm->time_to_expire = 0xFFFFFFFF; +} + +/* allocates state machine ids. */ +static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data) +{ + /* zero out state machine indices */ + /* rx indices */ + index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; + + /* tx indices */ + index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID; + + /* map indices */ + /* rx indices */ + index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |= + SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + + /* tx indices */ + index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; +} + +void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, + u8 vf_valid, int fw_sb_id, int igu_sb_id) +{ + int igu_seg_id; + + struct hc_status_block_data_e2 sb_data_e2; + struct hc_status_block_data_e1x sb_data_e1x; + struct hc_status_block_sm *hc_sm_p; + int data_size; + u32 *sb_data_p; + + if (CHIP_INT_MODE_IS_BC(bp)) + igu_seg_id = HC_SEG_ACCESS_NORM; + else + igu_seg_id = IGU_SEG_ACCESS_NORM; + + bnx2x_zero_fp_sb(bp, fw_sb_id); + + if (!CHIP_IS_E1x(bp)) { + memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2)); + sb_data_e2.common.state = SB_ENABLED; + sb_data_e2.common.p_func.pf_id = BP_FUNC(bp); + sb_data_e2.common.p_func.vf_id = vfid; + sb_data_e2.common.p_func.vf_valid = vf_valid; + sb_data_e2.common.p_func.vnic_id = BP_VN(bp); + sb_data_e2.common.same_igu_sb_1b = true; + sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping); + sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping); + hc_sm_p = sb_data_e2.common.state_machine; + sb_data_p = (u32 *)&sb_data_e2; + data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); + bnx2x_map_sb_state_machines(sb_data_e2.index_data); + } else { + memset(&sb_data_e1x, 0, + sizeof(struct hc_status_block_data_e1x)); + sb_data_e1x.common.state = SB_ENABLED; + sb_data_e1x.common.p_func.pf_id = BP_FUNC(bp); + sb_data_e1x.common.p_func.vf_id = 0xff; + sb_data_e1x.common.p_func.vf_valid = false; + sb_data_e1x.common.p_func.vnic_id = BP_VN(bp); + sb_data_e1x.common.same_igu_sb_1b = true; + sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping); + sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping); + hc_sm_p = sb_data_e1x.common.state_machine; + sb_data_p = (u32 *)&sb_data_e1x; + data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); + bnx2x_map_sb_state_machines(sb_data_e1x.index_data); + } + + bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], + igu_sb_id, igu_seg_id); + bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], + igu_sb_id, igu_seg_id); + + DP(NETIF_MSG_IFUP, "Init FW SB %d\n", fw_sb_id); + + /* write indices to HW - PCI guarantees endianity of regpairs */ + bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); +} + +static void bnx2x_update_coalesce_sb(struct bnx2x *bp, u8 fw_sb_id, + u16 tx_usec, u16 rx_usec) +{ + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, HC_INDEX_ETH_RX_CQ_CONS, + false, rx_usec); + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, + HC_INDEX_ETH_TX_CQ_CONS_COS0, false, + tx_usec); + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, + HC_INDEX_ETH_TX_CQ_CONS_COS1, false, + tx_usec); + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, + HC_INDEX_ETH_TX_CQ_CONS_COS2, false, + tx_usec); +} + +static void bnx2x_init_def_sb(struct bnx2x *bp) +{ + struct host_sp_status_block *def_sb = bp->def_status_blk; + dma_addr_t mapping = bp->def_status_blk_mapping; + int igu_sp_sb_index; + int igu_seg_id; + int port = BP_PORT(bp); + int func = BP_FUNC(bp); + int reg_offset, reg_offset_en5; + u64 section; + int index; + struct hc_sp_status_block_data sp_sb_data; + memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data)); + + if (CHIP_INT_MODE_IS_BC(bp)) { + igu_sp_sb_index = DEF_SB_IGU_ID; + igu_seg_id = HC_SEG_ACCESS_DEF; + } else { + igu_sp_sb_index = bp->igu_dsb_id; + igu_seg_id = IGU_SEG_ACCESS_DEF; + } + + /* ATTN */ + section = ((u64)mapping) + offsetof(struct host_sp_status_block, + atten_status_block); + def_sb->atten_status_block.status_block_id = igu_sp_sb_index; + + bp->attn_state = 0; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0); + for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) { + int sindex; + /* take care of sig[0]..sig[4] */ + for (sindex = 0; sindex < 4; sindex++) + bp->attn_group[index].sig[sindex] = + REG_RD(bp, reg_offset + sindex*0x4 + 0x10*index); + + if (!CHIP_IS_E1x(bp)) + /* + * enable5 is separate from the rest of the registers, + * and therefore the address skip is 4 + * and not 16 between the different groups + */ + bp->attn_group[index].sig[4] = REG_RD(bp, + reg_offset_en5 + 0x4*index); + else + bp->attn_group[index].sig[4] = 0; + } + + if (bp->common.int_block == INT_BLOCK_HC) { + reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L : + HC_REG_ATTN_MSG0_ADDR_L); + + REG_WR(bp, reg_offset, U64_LO(section)); + REG_WR(bp, reg_offset + 4, U64_HI(section)); + } else if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section)); + REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section)); + } + + section = ((u64)mapping) + offsetof(struct host_sp_status_block, + sp_sb); + + bnx2x_zero_sp_sb(bp); + + /* PCI guarantees endianity of regpairs */ + sp_sb_data.state = SB_ENABLED; + sp_sb_data.host_sb_addr.lo = U64_LO(section); + sp_sb_data.host_sb_addr.hi = U64_HI(section); + sp_sb_data.igu_sb_id = igu_sp_sb_index; + sp_sb_data.igu_seg_id = igu_seg_id; + sp_sb_data.p_func.pf_id = func; + sp_sb_data.p_func.vnic_id = BP_VN(bp); + sp_sb_data.p_func.vf_id = 0xff; + + bnx2x_wr_sp_sb_data(bp, &sp_sb_data); + + bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0); +} + +void bnx2x_update_coalesce(struct bnx2x *bp) +{ + int i; + + for_each_eth_queue(bp, i) + bnx2x_update_coalesce_sb(bp, bp->fp[i].fw_sb_id, + bp->tx_ticks, bp->rx_ticks); +} + +static void bnx2x_init_sp_ring(struct bnx2x *bp) +{ + spin_lock_init(&bp->spq_lock); + atomic_set(&bp->cq_spq_left, MAX_SPQ_PENDING); + + bp->spq_prod_idx = 0; + bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX; + bp->spq_prod_bd = bp->spq; + bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT; +} + +static void bnx2x_init_eq_ring(struct bnx2x *bp) +{ + int i; + for (i = 1; i <= NUM_EQ_PAGES; i++) { + union event_ring_elem *elem = + &bp->eq_ring[EQ_DESC_CNT_PAGE * i - 1]; + + elem->next_page.addr.hi = + cpu_to_le32(U64_HI(bp->eq_mapping + + BCM_PAGE_SIZE * (i % NUM_EQ_PAGES))); + elem->next_page.addr.lo = + cpu_to_le32(U64_LO(bp->eq_mapping + + BCM_PAGE_SIZE*(i % NUM_EQ_PAGES))); + } + bp->eq_cons = 0; + bp->eq_prod = NUM_EQ_DESC; + bp->eq_cons_sb = BNX2X_EQ_INDEX; + /* we want a warning message before it gets wrought... */ + atomic_set(&bp->eq_spq_left, + min_t(int, MAX_SP_DESC_CNT - MAX_SPQ_PENDING, NUM_EQ_DESC) - 1); +} + +/* called with netif_addr_lock_bh() */ +static int bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, + unsigned long rx_mode_flags, + unsigned long rx_accept_flags, + unsigned long tx_accept_flags, + unsigned long ramrod_flags) +{ + struct bnx2x_rx_mode_ramrod_params ramrod_param; + int rc; + + memset(&ramrod_param, 0, sizeof(ramrod_param)); + + /* Prepare ramrod parameters */ + ramrod_param.cid = 0; + ramrod_param.cl_id = cl_id; + ramrod_param.rx_mode_obj = &bp->rx_mode_obj; + ramrod_param.func_id = BP_FUNC(bp); + + ramrod_param.pstate = &bp->sp_state; + ramrod_param.state = BNX2X_FILTER_RX_MODE_PENDING; + + ramrod_param.rdata = bnx2x_sp(bp, rx_mode_rdata); + ramrod_param.rdata_mapping = bnx2x_sp_mapping(bp, rx_mode_rdata); + + set_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state); + + ramrod_param.ramrod_flags = ramrod_flags; + ramrod_param.rx_mode_flags = rx_mode_flags; + + ramrod_param.rx_accept_flags = rx_accept_flags; + ramrod_param.tx_accept_flags = tx_accept_flags; + + rc = bnx2x_config_rx_mode(bp, &ramrod_param); + if (rc < 0) { + BNX2X_ERR("Set rx_mode %d failed\n", bp->rx_mode); + return rc; + } + + return 0; +} + +static int bnx2x_fill_accept_flags(struct bnx2x *bp, u32 rx_mode, + unsigned long *rx_accept_flags, + unsigned long *tx_accept_flags) +{ + /* Clear the flags first */ + *rx_accept_flags = 0; + *tx_accept_flags = 0; + + switch (rx_mode) { + case BNX2X_RX_MODE_NONE: + /* + * 'drop all' supersedes any accept flags that may have been + * passed to the function. + */ + break; + case BNX2X_RX_MODE_NORMAL: + __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_MULTICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); + + /* internal switching mode */ + __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_MULTICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); + + break; + case BNX2X_RX_MODE_ALLMULTI: + __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); + + /* internal switching mode */ + __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); + + break; + case BNX2X_RX_MODE_PROMISC: + /* According to definition of SI mode, iface in promisc mode + * should receive matched and unmatched (in resolution of port) + * unicast packets. + */ + __set_bit(BNX2X_ACCEPT_UNMATCHED, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); + + /* internal switching mode */ + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); + + if (IS_MF_SI(bp)) + __set_bit(BNX2X_ACCEPT_ALL_UNICAST, tx_accept_flags); + else + __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); + + break; + default: + BNX2X_ERR("Unknown rx_mode: %d\n", rx_mode); + return -EINVAL; + } + + /* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */ + if (rx_mode != BNX2X_RX_MODE_NONE) { + __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags); + } + + return 0; +} + +/* called with netif_addr_lock_bh() */ +static int bnx2x_set_storm_rx_mode(struct bnx2x *bp) +{ + unsigned long rx_mode_flags = 0, ramrod_flags = 0; + unsigned long rx_accept_flags = 0, tx_accept_flags = 0; + int rc; + + if (!NO_FCOE(bp)) + /* Configure rx_mode of FCoE Queue */ + __set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags); + + rc = bnx2x_fill_accept_flags(bp, bp->rx_mode, &rx_accept_flags, + &tx_accept_flags); + if (rc) + return rc; + + __set_bit(RAMROD_RX, &ramrod_flags); + __set_bit(RAMROD_TX, &ramrod_flags); + + return bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags, + rx_accept_flags, tx_accept_flags, + ramrod_flags); +} + +static void bnx2x_init_internal_common(struct bnx2x *bp) +{ + int i; + + /* Zero this manually as its initialization is + currently missing in the initTool */ + for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_AGG_DATA_OFFSET + i * 4, 0); + if (!CHIP_IS_E1x(bp)) { + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET, + CHIP_INT_MODE_IS_BC(bp) ? + HC_IGU_BC_MODE : HC_IGU_NBC_MODE); + } +} + +static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code) +{ + switch (load_code) { + case FW_MSG_CODE_DRV_LOAD_COMMON: + case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP: + bnx2x_init_internal_common(bp); + /* no break */ + + case FW_MSG_CODE_DRV_LOAD_PORT: + /* nothing to do */ + /* no break */ + + case FW_MSG_CODE_DRV_LOAD_FUNCTION: + /* internal memory per function is + initialized inside bnx2x_pf_init */ + break; + + default: + BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code); + break; + } +} + +static inline u8 bnx2x_fp_igu_sb_id(struct bnx2x_fastpath *fp) +{ + return fp->bp->igu_base_sb + fp->index + CNIC_SUPPORT(fp->bp); +} + +static inline u8 bnx2x_fp_fw_sb_id(struct bnx2x_fastpath *fp) +{ + return fp->bp->base_fw_ndsb + fp->index + CNIC_SUPPORT(fp->bp); +} + +static u8 bnx2x_fp_cl_id(struct bnx2x_fastpath *fp) +{ + if (CHIP_IS_E1x(fp->bp)) + return BP_L_ID(fp->bp) + fp->index; + else /* We want Client ID to be the same as IGU SB ID for 57712 */ + return bnx2x_fp_igu_sb_id(fp); +} + +static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx) +{ + struct bnx2x_fastpath *fp = &bp->fp[fp_idx]; + u8 cos; + unsigned long q_type = 0; + u32 cids[BNX2X_MULTI_TX_COS] = { 0 }; + fp->rx_queue = fp_idx; + fp->cid = fp_idx; + fp->cl_id = bnx2x_fp_cl_id(fp); + fp->fw_sb_id = bnx2x_fp_fw_sb_id(fp); + fp->igu_sb_id = bnx2x_fp_igu_sb_id(fp); + /* qZone id equals to FW (per path) client id */ + fp->cl_qzone_id = bnx2x_fp_qzone_id(fp); + + /* init shortcut */ + fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(fp); + + /* Setup SB indices */ + fp->rx_cons_sb = BNX2X_RX_SB_INDEX; + + /* Configure Queue State object */ + __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); + __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); + + BUG_ON(fp->max_cos > BNX2X_MULTI_TX_COS); + + /* init tx data */ + for_each_cos_in_tx_queue(fp, cos) { + bnx2x_init_txdata(bp, fp->txdata_ptr[cos], + CID_COS_TO_TX_ONLY_CID(fp->cid, cos, bp), + FP_COS_TO_TXQ(fp, cos, bp), + BNX2X_TX_SB_INDEX_BASE + cos, fp); + cids[cos] = fp->txdata_ptr[cos]->cid; + } + + /* nothing more for vf to do here */ + if (IS_VF(bp)) + return; + + bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false, + fp->fw_sb_id, fp->igu_sb_id); + bnx2x_update_fpsb_idx(fp); + bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, cids, + fp->max_cos, BP_FUNC(bp), bnx2x_sp(bp, q_rdata), + bnx2x_sp_mapping(bp, q_rdata), q_type); + + /** + * Configure classification DBs: Always enable Tx switching + */ + bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX); + + DP(NETIF_MSG_IFUP, + "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n", + fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, + fp->igu_sb_id); +} + +static void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata *txdata) +{ + int i; + + for (i = 1; i <= NUM_TX_RINGS; i++) { + struct eth_tx_next_bd *tx_next_bd = + &txdata->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd; + + tx_next_bd->addr_hi = + cpu_to_le32(U64_HI(txdata->tx_desc_mapping + + BCM_PAGE_SIZE*(i % NUM_TX_RINGS))); + tx_next_bd->addr_lo = + cpu_to_le32(U64_LO(txdata->tx_desc_mapping + + BCM_PAGE_SIZE*(i % NUM_TX_RINGS))); + } + + *txdata->tx_cons_sb = cpu_to_le16(0); + + SET_FLAG(txdata->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1); + txdata->tx_db.data.zero_fill1 = 0; + txdata->tx_db.data.prod = 0; + + txdata->tx_pkt_prod = 0; + txdata->tx_pkt_cons = 0; + txdata->tx_bd_prod = 0; + txdata->tx_bd_cons = 0; + txdata->tx_pkt = 0; +} + +static void bnx2x_init_tx_rings_cnic(struct bnx2x *bp) +{ + int i; + + for_each_tx_queue_cnic(bp, i) + bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[0]); +} + +static void bnx2x_init_tx_rings(struct bnx2x *bp) +{ + int i; + u8 cos; + + for_each_eth_queue(bp, i) + for_each_cos_in_tx_queue(&bp->fp[i], cos) + bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[cos]); +} + +static void bnx2x_init_fcoe_fp(struct bnx2x *bp) +{ + struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); + unsigned long q_type = 0; + + bnx2x_fcoe(bp, rx_queue) = BNX2X_NUM_ETH_QUEUES(bp); + bnx2x_fcoe(bp, cl_id) = bnx2x_cnic_eth_cl_id(bp, + BNX2X_FCOE_ETH_CL_ID_IDX); + bnx2x_fcoe(bp, cid) = BNX2X_FCOE_ETH_CID(bp); + bnx2x_fcoe(bp, fw_sb_id) = DEF_SB_ID; + bnx2x_fcoe(bp, igu_sb_id) = bp->igu_dsb_id; + bnx2x_fcoe(bp, rx_cons_sb) = BNX2X_FCOE_L2_RX_INDEX; + bnx2x_init_txdata(bp, bnx2x_fcoe(bp, txdata_ptr[0]), + fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX, + fp); + + DP(NETIF_MSG_IFUP, "created fcoe tx data (fp index %d)\n", fp->index); + + /* qZone id equals to FW (per path) client id */ + bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp); + /* init shortcut */ + bnx2x_fcoe(bp, ustorm_rx_prods_offset) = + bnx2x_rx_ustorm_prods_offset(fp); + + /* Configure Queue State object */ + __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); + __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); + + /* No multi-CoS for FCoE L2 client */ + BUG_ON(fp->max_cos != 1); + + bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, + &fp->cid, 1, BP_FUNC(bp), bnx2x_sp(bp, q_rdata), + bnx2x_sp_mapping(bp, q_rdata), q_type); + + DP(NETIF_MSG_IFUP, + "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n", + fp->index, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, + fp->igu_sb_id); +} + +void bnx2x_nic_init_cnic(struct bnx2x *bp) +{ + if (!NO_FCOE(bp)) + bnx2x_init_fcoe_fp(bp); + + bnx2x_init_sb(bp, bp->cnic_sb_mapping, + BNX2X_VF_ID_INVALID, false, + bnx2x_cnic_fw_sb_id(bp), bnx2x_cnic_igu_sb_id(bp)); + + /* ensure status block indices were read */ + rmb(); + bnx2x_init_rx_rings_cnic(bp); + bnx2x_init_tx_rings_cnic(bp); + + /* flush all */ + mb(); + mmiowb(); +} + +void bnx2x_pre_irq_nic_init(struct bnx2x *bp) +{ + int i; + + /* Setup NIC internals and enable interrupts */ + for_each_eth_queue(bp, i) + bnx2x_init_eth_fp(bp, i); + + /* ensure status block indices were read */ + rmb(); + bnx2x_init_rx_rings(bp); + bnx2x_init_tx_rings(bp); + + if (IS_PF(bp)) { + /* Initialize MOD_ABS interrupts */ + bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id, + bp->common.shmem_base, + bp->common.shmem2_base, BP_PORT(bp)); + + /* initialize the default status block and sp ring */ + bnx2x_init_def_sb(bp); + bnx2x_update_dsb_idx(bp); + bnx2x_init_sp_ring(bp); + } else { + bnx2x_memset_stats(bp); + } +} + +void bnx2x_post_irq_nic_init(struct bnx2x *bp, u32 load_code) +{ + bnx2x_init_eq_ring(bp); + bnx2x_init_internal(bp, load_code); + bnx2x_pf_init(bp); + bnx2x_stats_init(bp); + + /* flush all before enabling interrupts */ + mb(); + mmiowb(); + + bnx2x_int_enable(bp); + + /* Check for SPIO5 */ + bnx2x_attn_int_deasserted0(bp, + REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) & + AEU_INPUTS_ATTN_BITS_SPIO5); +} + +/* gzip service functions */ +static int bnx2x_gunzip_init(struct bnx2x *bp) +{ + bp->gunzip_buf = dma_alloc_coherent(&bp->pdev->dev, FW_BUF_SIZE, + &bp->gunzip_mapping, GFP_KERNEL); + if (bp->gunzip_buf == NULL) + goto gunzip_nomem1; + + bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL); + if (bp->strm == NULL) + goto gunzip_nomem2; + + bp->strm->workspace = vmalloc(zlib_inflate_workspacesize()); + if (bp->strm->workspace == NULL) + goto gunzip_nomem3; + + return 0; + +gunzip_nomem3: + kfree(bp->strm); + bp->strm = NULL; + +gunzip_nomem2: + dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf, + bp->gunzip_mapping); + bp->gunzip_buf = NULL; + +gunzip_nomem1: + BNX2X_ERR("Cannot allocate firmware buffer for un-compression\n"); + return -ENOMEM; +} + +static void bnx2x_gunzip_end(struct bnx2x *bp) +{ + if (bp->strm) { + vfree(bp->strm->workspace); + kfree(bp->strm); + bp->strm = NULL; + } + + if (bp->gunzip_buf) { + dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf, + bp->gunzip_mapping); + bp->gunzip_buf = NULL; + } +} + +static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len) +{ + int n, rc; + + /* check gzip header */ + if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) { + BNX2X_ERR("Bad gzip header\n"); + return -EINVAL; + } + + n = 10; + +#define FNAME 0x8 + + if (zbuf[3] & FNAME) + while ((zbuf[n++] != 0) && (n < len)); + + bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n; + bp->strm->avail_in = len - n; + bp->strm->next_out = bp->gunzip_buf; + bp->strm->avail_out = FW_BUF_SIZE; + + rc = zlib_inflateInit2(bp->strm, -MAX_WBITS); + if (rc != Z_OK) + return rc; + + rc = zlib_inflate(bp->strm, Z_FINISH); + if ((rc != Z_OK) && (rc != Z_STREAM_END)) + netdev_err(bp->dev, "Firmware decompression error: %s\n", + bp->strm->msg); + + bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out); + if (bp->gunzip_outlen & 0x3) + netdev_err(bp->dev, + "Firmware decompression error: gunzip_outlen (%d) not aligned\n", + bp->gunzip_outlen); + bp->gunzip_outlen >>= 2; + + zlib_inflateEnd(bp->strm); + + if (rc == Z_STREAM_END) + return 0; + + return rc; +} + +/* nic load/unload */ + +/* + * General service functions + */ + +/* send a NIG loopback debug packet */ +static void bnx2x_lb_pckt(struct bnx2x *bp) +{ + u32 wb_write[3]; + + /* Ethernet source and destination addresses */ + wb_write[0] = 0x55555555; + wb_write[1] = 0x55555555; + wb_write[2] = 0x20; /* SOP */ + REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3); + + /* NON-IP protocol */ + wb_write[0] = 0x09000000; + wb_write[1] = 0x55555555; + wb_write[2] = 0x10; /* EOP, eop_bvalid = 0 */ + REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3); +} + +/* some of the internal memories + * are not directly readable from the driver + * to test them we send debug packets + */ +static int bnx2x_int_mem_test(struct bnx2x *bp) +{ + int factor; + int count, i; + u32 val = 0; + + if (CHIP_REV_IS_FPGA(bp)) + factor = 120; + else if (CHIP_REV_IS_EMUL(bp)) + factor = 200; + else + factor = 1; + + /* Disable inputs of parser neighbor blocks */ + REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0); + REG_WR(bp, TCM_REG_PRS_IFEN, 0x0); + REG_WR(bp, CFC_REG_DEBUG0, 0x1); + REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0); + + /* Write 0 to parser credits for CFC search request */ + REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0); + + /* send Ethernet packet */ + bnx2x_lb_pckt(bp); + + /* TODO do i reset NIG statistic? */ + /* Wait until NIG register shows 1 packet of size 0x10 */ + count = 1000 * factor; + while (count) { + + bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); + val = *bnx2x_sp(bp, wb_data[0]); + if (val == 0x10) + break; + + usleep_range(10000, 20000); + count--; + } + if (val != 0x10) { + BNX2X_ERR("NIG timeout val = 0x%x\n", val); + return -1; + } + + /* Wait until PRS register shows 1 packet */ + count = 1000 * factor; + while (count) { + val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); + if (val == 1) + break; + + usleep_range(10000, 20000); + count--; + } + if (val != 0x1) { + BNX2X_ERR("PRS timeout val = 0x%x\n", val); + return -2; + } + + /* Reset and init BRB, PRS */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03); + msleep(50); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); + msleep(50); + bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); + + DP(NETIF_MSG_HW, "part2\n"); + + /* Disable inputs of parser neighbor blocks */ + REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0); + REG_WR(bp, TCM_REG_PRS_IFEN, 0x0); + REG_WR(bp, CFC_REG_DEBUG0, 0x1); + REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0); + + /* Write 0 to parser credits for CFC search request */ + REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0); + + /* send 10 Ethernet packets */ + for (i = 0; i < 10; i++) + bnx2x_lb_pckt(bp); + + /* Wait until NIG register shows 10 + 1 + packets of size 11*0x10 = 0xb0 */ + count = 1000 * factor; + while (count) { + + bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); + val = *bnx2x_sp(bp, wb_data[0]); + if (val == 0xb0) + break; + + usleep_range(10000, 20000); + count--; + } + if (val != 0xb0) { + BNX2X_ERR("NIG timeout val = 0x%x\n", val); + return -3; + } + + /* Wait until PRS register shows 2 packets */ + val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); + if (val != 2) + BNX2X_ERR("PRS timeout val = 0x%x\n", val); + + /* Write 1 to parser credits for CFC search request */ + REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1); + + /* Wait until PRS register shows 3 packets */ + msleep(10 * factor); + /* Wait until NIG register shows 1 packet of size 0x10 */ + val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); + if (val != 3) + BNX2X_ERR("PRS timeout val = 0x%x\n", val); + + /* clear NIG EOP FIFO */ + for (i = 0; i < 11; i++) + REG_RD(bp, NIG_REG_INGRESS_EOP_LB_FIFO); + val = REG_RD(bp, NIG_REG_INGRESS_EOP_LB_EMPTY); + if (val != 1) { + BNX2X_ERR("clear of NIG failed\n"); + return -4; + } + + /* Reset and init BRB, PRS, NIG */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03); + msleep(50); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); + msleep(50); + bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); + if (!CNIC_SUPPORT(bp)) + /* set NIC mode */ + REG_WR(bp, PRS_REG_NIC_MODE, 1); + + /* Enable inputs of parser neighbor blocks */ + REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff); + REG_WR(bp, TCM_REG_PRS_IFEN, 0x1); + REG_WR(bp, CFC_REG_DEBUG0, 0x0); + REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1); + + DP(NETIF_MSG_HW, "done\n"); + + return 0; /* OK */ +} + +static void bnx2x_enable_blocks_attention(struct bnx2x *bp) +{ + u32 val; + + REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0x40); + else + REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0); + REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); + REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); + /* + * mask read length error interrupts in brb for parser + * (parsing unit and 'checksum and crc' unit) + * these errors are legal (PU reads fixed length and CAC can cause + * read length error on truncated packets) + */ + REG_WR(bp, BRB1_REG_BRB1_INT_MASK, 0xFC00); + REG_WR(bp, QM_REG_QM_INT_MASK, 0); + REG_WR(bp, TM_REG_TM_INT_MASK, 0); + REG_WR(bp, XSDM_REG_XSDM_INT_MASK_0, 0); + REG_WR(bp, XSDM_REG_XSDM_INT_MASK_1, 0); + REG_WR(bp, XCM_REG_XCM_INT_MASK, 0); +/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */ +/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */ + REG_WR(bp, USDM_REG_USDM_INT_MASK_0, 0); + REG_WR(bp, USDM_REG_USDM_INT_MASK_1, 0); + REG_WR(bp, UCM_REG_UCM_INT_MASK, 0); +/* REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */ +/* REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */ + REG_WR(bp, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0); + REG_WR(bp, CSDM_REG_CSDM_INT_MASK_0, 0); + REG_WR(bp, CSDM_REG_CSDM_INT_MASK_1, 0); + REG_WR(bp, CCM_REG_CCM_INT_MASK, 0); +/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */ +/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */ + + val = PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT | + PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF | + PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN; + if (!CHIP_IS_E1x(bp)) + val |= PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED | + PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED; + REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, val); + + REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0); + REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0); + REG_WR(bp, TCM_REG_TCM_INT_MASK, 0); +/* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */ + + if (!CHIP_IS_E1x(bp)) + /* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */ + REG_WR(bp, TSEM_REG_TSEM_INT_MASK_1, 0x07ff); + + REG_WR(bp, CDU_REG_CDU_INT_MASK, 0); + REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0); +/* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */ + REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */ +} + +static void bnx2x_reset_common(struct bnx2x *bp) +{ + u32 val = 0x1400; + + /* reset_common */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + 0xd3ffff7f); + + if (CHIP_IS_E3(bp)) { + val |= MISC_REGISTERS_RESET_REG_2_MSTAT0; + val |= MISC_REGISTERS_RESET_REG_2_MSTAT1; + } + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, val); +} + +static void bnx2x_setup_dmae(struct bnx2x *bp) +{ + bp->dmae_ready = 0; + spin_lock_init(&bp->dmae_lock); +} + +static void bnx2x_init_pxp(struct bnx2x *bp) +{ + u16 devctl; + int r_order, w_order; + + pcie_capability_read_word(bp->pdev, PCI_EXP_DEVCTL, &devctl); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); + w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); + if (bp->mrrs == -1) + r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); + else { + DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs); + r_order = bp->mrrs; + } + + bnx2x_init_pxp_arb(bp, r_order, w_order); +} + +static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp) +{ + int is_required; + u32 val; + int port; + + if (BP_NOMCP(bp)) + return; + + is_required = 0; + val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) & + SHARED_HW_CFG_FAN_FAILURE_MASK; + + if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) + is_required = 1; + + /* + * The fan failure mechanism is usually related to the PHY type since + * the power consumption of the board is affected by the PHY. Currently, + * fan is required for most designs with SFX7101, BCM8727 and BCM8481. + */ + else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) + for (port = PORT_0; port < PORT_MAX; port++) { + is_required |= + bnx2x_fan_failure_det_req( + bp, + bp->common.shmem_base, + bp->common.shmem2_base, + port); + } + + DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required); + + if (is_required == 0) + return; + + /* Fan failure is indicated by SPIO 5 */ + bnx2x_set_spio(bp, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z); + + /* set to active low mode */ + val = REG_RD(bp, MISC_REG_SPIO_INT); + val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS); + REG_WR(bp, MISC_REG_SPIO_INT, val); + + /* enable interrupt to signal the IGU */ + val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); + val |= MISC_SPIO_SPIO5; + REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val); +} + +void bnx2x_pf_disable(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); + val &= ~IGU_PF_CONF_FUNC_EN; + + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); + REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 0); +} + +static void bnx2x__common_init_phy(struct bnx2x *bp) +{ + u32 shmem_base[2], shmem2_base[2]; + /* Avoid common init in case MFW supports LFA */ + if (SHMEM2_RD(bp, size) > + (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)])) + return; + shmem_base[0] = bp->common.shmem_base; + shmem2_base[0] = bp->common.shmem2_base; + if (!CHIP_IS_E1x(bp)) { + shmem_base[1] = + SHMEM2_RD(bp, other_shmem_base_addr); + shmem2_base[1] = + SHMEM2_RD(bp, other_shmem2_base_addr); + } + bnx2x_acquire_phy_lock(bp); + bnx2x_common_init_phy(bp, shmem_base, shmem2_base, + bp->common.chip_id); + bnx2x_release_phy_lock(bp); +} + +static void bnx2x_config_endianity(struct bnx2x *bp, u32 val) +{ + REG_WR(bp, PXP2_REG_RQ_QM_ENDIAN_M, val); + REG_WR(bp, PXP2_REG_RQ_TM_ENDIAN_M, val); + REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, val); + REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, val); + REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, val); + + /* make sure this value is 0 */ + REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 0); + + REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, val); + REG_WR(bp, PXP2_REG_RD_TM_SWAP_MODE, val); + REG_WR(bp, PXP2_REG_RD_SRC_SWAP_MODE, val); + REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, val); +} + +static void bnx2x_set_endianity(struct bnx2x *bp) +{ +#ifdef __BIG_ENDIAN + bnx2x_config_endianity(bp, 1); +#else + bnx2x_config_endianity(bp, 0); +#endif +} + +static void bnx2x_reset_endianity(struct bnx2x *bp) +{ + bnx2x_config_endianity(bp, 0); +} + +/** + * bnx2x_init_hw_common - initialize the HW at the COMMON phase. + * + * @bp: driver handle + */ +static int bnx2x_init_hw_common(struct bnx2x *bp) +{ + u32 val; + + DP(NETIF_MSG_HW, "starting common init func %d\n", BP_ABS_FUNC(bp)); + + /* + * take the RESET lock to protect undi_unload flow from accessing + * registers while we're resetting the chip + */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + + bnx2x_reset_common(bp); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); + + val = 0xfffc; + if (CHIP_IS_E3(bp)) { + val |= MISC_REGISTERS_RESET_REG_2_MSTAT0; + val |= MISC_REGISTERS_RESET_REG_2_MSTAT1; + } + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val); + + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + + bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp)) { + u8 abs_func_id; + + /** + * 4-port mode or 2-port mode we need to turn of master-enable + * for everyone, after that, turn it back on for self. + * so, we disregard multi-function or not, and always disable + * for all functions on the given path, this means 0,2,4,6 for + * path 0 and 1,3,5,7 for path 1 + */ + for (abs_func_id = BP_PATH(bp); + abs_func_id < E2_FUNC_MAX*2; abs_func_id += 2) { + if (abs_func_id == BP_ABS_FUNC(bp)) { + REG_WR(bp, + PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, + 1); + continue; + } + + bnx2x_pretend_func(bp, abs_func_id); + /* clear pf enable */ + bnx2x_pf_disable(bp); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + } + } + + bnx2x_init_block(bp, BLOCK_PXP, PHASE_COMMON); + if (CHIP_IS_E1(bp)) { + /* enable HW interrupt from PXP on USDM overflow + bit 16 on INT_MASK_0 */ + REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); + } + + bnx2x_init_block(bp, BLOCK_PXP2, PHASE_COMMON); + bnx2x_init_pxp(bp); + bnx2x_set_endianity(bp); + bnx2x_ilt_init_page_size(bp, INITOP_SET); + + if (CHIP_REV_IS_FPGA(bp) && CHIP_IS_E1H(bp)) + REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x1); + + /* let the HW do it's magic ... */ + msleep(100); + /* finish PXP init */ + val = REG_RD(bp, PXP2_REG_RQ_CFG_DONE); + if (val != 1) { + BNX2X_ERR("PXP2 CFG failed\n"); + return -EBUSY; + } + val = REG_RD(bp, PXP2_REG_RD_INIT_DONE); + if (val != 1) { + BNX2X_ERR("PXP2 RD_INIT failed\n"); + return -EBUSY; + } + + /* Timers bug workaround E2 only. We need to set the entire ILT to + * have entries with value "0" and valid bit on. + * This needs to be done by the first PF that is loaded in a path + * (i.e. common phase) + */ + if (!CHIP_IS_E1x(bp)) { +/* In E2 there is a bug in the timers block that can cause function 6 / 7 + * (i.e. vnic3) to start even if it is marked as "scan-off". + * This occurs when a different function (func2,3) is being marked + * as "scan-off". Real-life scenario for example: if a driver is being + * load-unloaded while func6,7 are down. This will cause the timer to access + * the ilt, translate to a logical address and send a request to read/write. + * Since the ilt for the function that is down is not valid, this will cause + * a translation error which is unrecoverable. + * The Workaround is intended to make sure that when this happens nothing fatal + * will occur. The workaround: + * 1. First PF driver which loads on a path will: + * a. After taking the chip out of reset, by using pretend, + * it will write "0" to the following registers of + * the other vnics. + * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); + * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0); + * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0); + * And for itself it will write '1' to + * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable + * dmae-operations (writing to pram for example.) + * note: can be done for only function 6,7 but cleaner this + * way. + * b. Write zero+valid to the entire ILT. + * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of + * VNIC3 (of that port). The range allocated will be the + * entire ILT. This is needed to prevent ILT range error. + * 2. Any PF driver load flow: + * a. ILT update with the physical addresses of the allocated + * logical pages. + * b. Wait 20msec. - note that this timeout is needed to make + * sure there are no requests in one of the PXP internal + * queues with "old" ILT addresses. + * c. PF enable in the PGLC. + * d. Clear the was_error of the PF in the PGLC. (could have + * occurred while driver was down) + * e. PF enable in the CFC (WEAK + STRONG) + * f. Timers scan enable + * 3. PF driver unload flow: + * a. Clear the Timers scan_en. + * b. Polling for scan_on=0 for that PF. + * c. Clear the PF enable bit in the PXP. + * d. Clear the PF enable in the CFC (WEAK + STRONG) + * e. Write zero+valid to all ILT entries (The valid bit must + * stay set) + * f. If this is VNIC 3 of a port then also init + * first_timers_ilt_entry to zero and last_timers_ilt_entry + * to the last entry in the ILT. + * + * Notes: + * Currently the PF error in the PGLC is non recoverable. + * In the future the there will be a recovery routine for this error. + * Currently attention is masked. + * Having an MCP lock on the load/unload process does not guarantee that + * there is no Timer disable during Func6/7 enable. This is because the + * Timers scan is currently being cleared by the MCP on FLR. + * Step 2.d can be done only for PF6/7 and the driver can also check if + * there is error before clearing it. But the flow above is simpler and + * more general. + * All ILT entries are written by zero+valid and not just PF6/7 + * ILT entries since in the future the ILT entries allocation for + * PF-s might be dynamic. + */ + struct ilt_client_info ilt_cli; + struct bnx2x_ilt ilt; + memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); + memset(&ilt, 0, sizeof(struct bnx2x_ilt)); + + /* initialize dummy TM client */ + ilt_cli.start = 0; + ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; + ilt_cli.client_num = ILT_CLIENT_TM; + + /* Step 1: set zeroes to all ilt page entries with valid bit on + * Step 2: set the timers first/last ilt entry to point + * to the entire range to prevent ILT range error for 3rd/4th + * vnic (this code assumes existence of the vnic) + * + * both steps performed by call to bnx2x_ilt_client_init_op() + * with dummy TM client + * + * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT + * and his brother are split registers + */ + bnx2x_pretend_func(bp, (BP_PATH(bp) + 6)); + bnx2x_ilt_client_init_op_ilt(bp, &ilt, &ilt_cli, INITOP_CLEAR); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + + REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN); + REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN); + REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1); + } + + REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0); + REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0); + + if (!CHIP_IS_E1x(bp)) { + int factor = CHIP_REV_IS_EMUL(bp) ? 1000 : + (CHIP_REV_IS_FPGA(bp) ? 400 : 0); + bnx2x_init_block(bp, BLOCK_PGLUE_B, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_ATC, PHASE_COMMON); + + /* let the HW do it's magic ... */ + do { + msleep(200); + val = REG_RD(bp, ATC_REG_ATC_INIT_DONE); + } while (factor-- && (val != 1)); + + if (val != 1) { + BNX2X_ERR("ATC_INIT failed\n"); + return -EBUSY; + } + } + + bnx2x_init_block(bp, BLOCK_DMAE, PHASE_COMMON); + + bnx2x_iov_init_dmae(bp); + + /* clean the DMAE memory */ + bp->dmae_ready = 1; + bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8, 1); + + bnx2x_init_block(bp, BLOCK_TCM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_UCM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_CCM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_XCM, PHASE_COMMON); + + bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3); + bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3); + bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3); + bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3); + + bnx2x_init_block(bp, BLOCK_QM, PHASE_COMMON); + + /* QM queues pointers table */ + bnx2x_qm_init_ptr_table(bp, bp->qm_cid_count, INITOP_SET); + + /* soft reset pulse */ + REG_WR(bp, QM_REG_SOFT_RESET, 1); + REG_WR(bp, QM_REG_SOFT_RESET, 0); + + if (CNIC_SUPPORT(bp)) + bnx2x_init_block(bp, BLOCK_TM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_DORQ, PHASE_COMMON); + + if (!CHIP_REV_IS_SLOW(bp)) + /* enable hw interrupt from doorbell Q */ + REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); + + bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); + REG_WR(bp, PRS_REG_A_PRSU_20, 0xf); + + if (!CHIP_IS_E1(bp)) + REG_WR(bp, PRS_REG_E1HOV_MODE, bp->path_has_ovlan); + + if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3B0(bp)) { + if (IS_MF_AFEX(bp)) { + /* configure that VNTag and VLAN headers must be + * received in afex mode + */ + REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, 0xE); + REG_WR(bp, PRS_REG_MUST_HAVE_HDRS, 0xA); + REG_WR(bp, PRS_REG_HDRS_AFTER_TAG_0, 0x6); + REG_WR(bp, PRS_REG_TAG_ETHERTYPE_0, 0x8926); + REG_WR(bp, PRS_REG_TAG_LEN_0, 0x4); + } else { + /* Bit-map indicating which L2 hdrs may appear + * after the basic Ethernet header + */ + REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, + bp->path_has_ovlan ? 7 : 6); + } + } + + bnx2x_init_block(bp, BLOCK_TSDM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_CSDM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_USDM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_XSDM, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp)) { + /* reset VFC memories */ + REG_WR(bp, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST, + VFC_MEMORIES_RST_REG_CAM_RST | + VFC_MEMORIES_RST_REG_RAM_RST); + REG_WR(bp, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST, + VFC_MEMORIES_RST_REG_CAM_RST | + VFC_MEMORIES_RST_REG_RAM_RST); + + msleep(20); + } + + bnx2x_init_block(bp, BLOCK_TSEM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_USEM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_CSEM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_XSEM, PHASE_COMMON); + + /* sync semi rtc */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + 0x80000000); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + 0x80000000); + + bnx2x_init_block(bp, BLOCK_UPB, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_XPB, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_PBF, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp)) { + if (IS_MF_AFEX(bp)) { + /* configure that VNTag and VLAN headers must be + * sent in afex mode + */ + REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, 0xE); + REG_WR(bp, PBF_REG_MUST_HAVE_HDRS, 0xA); + REG_WR(bp, PBF_REG_HDRS_AFTER_TAG_0, 0x6); + REG_WR(bp, PBF_REG_TAG_ETHERTYPE_0, 0x8926); + REG_WR(bp, PBF_REG_TAG_LEN_0, 0x4); + } else { + REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, + bp->path_has_ovlan ? 7 : 6); + } + } + + REG_WR(bp, SRC_REG_SOFT_RST, 1); + + bnx2x_init_block(bp, BLOCK_SRC, PHASE_COMMON); + + if (CNIC_SUPPORT(bp)) { + REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672); + REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc); + REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b); + REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a); + REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116); + REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b); + REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf); + REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09); + REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f); + REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7); + } + REG_WR(bp, SRC_REG_SOFT_RST, 0); + + if (sizeof(union cdu_context) != 1024) + /* we currently assume that a context is 1024 bytes */ + dev_alert(&bp->pdev->dev, + "please adjust the size of cdu_context(%ld)\n", + (long)sizeof(union cdu_context)); + + bnx2x_init_block(bp, BLOCK_CDU, PHASE_COMMON); + val = (4 << 24) + (0 << 12) + 1024; + REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val); + + bnx2x_init_block(bp, BLOCK_CFC, PHASE_COMMON); + REG_WR(bp, CFC_REG_INIT_REG, 0x7FF); + /* enable context validation interrupt from CFC */ + REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); + + /* set the thresholds to prevent CFC/CDU race */ + REG_WR(bp, CFC_REG_DEBUG0, 0x20020000); + + bnx2x_init_block(bp, BLOCK_HC, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp) && BP_NOMCP(bp)) + REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x36); + + bnx2x_init_block(bp, BLOCK_IGU, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_MISC_AEU, PHASE_COMMON); + + /* Reset PCIE errors for debug */ + REG_WR(bp, 0x2814, 0xffffffff); + REG_WR(bp, 0x3820, 0xffffffff); + + if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_CONTROL_5, + (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 | + PXPCS_TL_CONTROL_5_ERR_UNSPPORT)); + REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT, + (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 | + PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 | + PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2)); + REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT, + (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 | + PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 | + PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5)); + } + + bnx2x_init_block(bp, BLOCK_NIG, PHASE_COMMON); + if (!CHIP_IS_E1(bp)) { + /* in E3 this done in per-port section */ + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_MF(bp)); + } + if (CHIP_IS_E1H(bp)) + /* not applicable for E2 (and above ...) */ + REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(bp)); + + if (CHIP_REV_IS_SLOW(bp)) + msleep(200); + + /* finish CFC init */ + val = reg_poll(bp, CFC_REG_LL_INIT_DONE, 1, 100, 10); + if (val != 1) { + BNX2X_ERR("CFC LL_INIT failed\n"); + return -EBUSY; + } + val = reg_poll(bp, CFC_REG_AC_INIT_DONE, 1, 100, 10); + if (val != 1) { + BNX2X_ERR("CFC AC_INIT failed\n"); + return -EBUSY; + } + val = reg_poll(bp, CFC_REG_CAM_INIT_DONE, 1, 100, 10); + if (val != 1) { + BNX2X_ERR("CFC CAM_INIT failed\n"); + return -EBUSY; + } + REG_WR(bp, CFC_REG_DEBUG0, 0); + + if (CHIP_IS_E1(bp)) { + /* read NIG statistic + to see if this is our first up since powerup */ + bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); + val = *bnx2x_sp(bp, wb_data[0]); + + /* do internal memory self test */ + if ((val == 0) && bnx2x_int_mem_test(bp)) { + BNX2X_ERR("internal mem self test failed\n"); + return -EBUSY; + } + } + + bnx2x_setup_fan_failure_detection(bp); + + /* clear PXP2 attentions */ + REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0); + + bnx2x_enable_blocks_attention(bp); + bnx2x_enable_blocks_parity(bp); + + if (!BP_NOMCP(bp)) { + if (CHIP_IS_E1x(bp)) + bnx2x__common_init_phy(bp); + } else + BNX2X_ERR("Bootcode is missing - can not initialize link\n"); + + return 0; +} + +/** + * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase. + * + * @bp: driver handle + */ +static int bnx2x_init_hw_common_chip(struct bnx2x *bp) +{ + int rc = bnx2x_init_hw_common(bp); + + if (rc) + return rc; + + /* In E2 2-PORT mode, same ext phy is used for the two paths */ + if (!BP_NOMCP(bp)) + bnx2x__common_init_phy(bp); + + return 0; +} + +static int bnx2x_init_hw_port(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int init_phase = port ? PHASE_PORT1 : PHASE_PORT0; + u32 low, high; + u32 val, reg; + + DP(NETIF_MSG_HW, "starting port init port %d\n", port); + + REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); + + bnx2x_init_block(bp, BLOCK_MISC, init_phase); + bnx2x_init_block(bp, BLOCK_PXP, init_phase); + bnx2x_init_block(bp, BLOCK_PXP2, init_phase); + + /* Timers bug workaround: disables the pf_master bit in pglue at + * common phase, we need to enable it here before any dmae access are + * attempted. Therefore we manually added the enable-master to the + * port phase (it also happens in the function phase) + */ + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); + + bnx2x_init_block(bp, BLOCK_ATC, init_phase); + bnx2x_init_block(bp, BLOCK_DMAE, init_phase); + bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); + bnx2x_init_block(bp, BLOCK_QM, init_phase); + + bnx2x_init_block(bp, BLOCK_TCM, init_phase); + bnx2x_init_block(bp, BLOCK_UCM, init_phase); + bnx2x_init_block(bp, BLOCK_CCM, init_phase); + bnx2x_init_block(bp, BLOCK_XCM, init_phase); + + /* QM cid (connection) count */ + bnx2x_qm_init_cid_count(bp, bp->qm_cid_count, INITOP_SET); + + if (CNIC_SUPPORT(bp)) { + bnx2x_init_block(bp, BLOCK_TM, init_phase); + REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20); + REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31); + } + + bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); + + if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) { + + if (IS_MF(bp)) + low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246); + else if (bp->dev->mtu > 4096) { + if (bp->flags & ONE_PORT_FLAG) + low = 160; + else { + val = bp->dev->mtu; + /* (24*1024 + val*4)/256 */ + low = 96 + (val/64) + + ((val % 64) ? 1 : 0); + } + } else + low = ((bp->flags & ONE_PORT_FLAG) ? 80 : 160); + high = low + 56; /* 14*1024/256 */ + REG_WR(bp, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low); + REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high); + } + + if (CHIP_MODE_IS_4_PORT(bp)) + REG_WR(bp, (BP_PORT(bp) ? + BRB1_REG_MAC_GUARANTIED_1 : + BRB1_REG_MAC_GUARANTIED_0), 40); + + bnx2x_init_block(bp, BLOCK_PRS, init_phase); + if (CHIP_IS_E3B0(bp)) { + if (IS_MF_AFEX(bp)) { + /* configure headers for AFEX mode */ + REG_WR(bp, BP_PORT(bp) ? + PRS_REG_HDRS_AFTER_BASIC_PORT_1 : + PRS_REG_HDRS_AFTER_BASIC_PORT_0, 0xE); + REG_WR(bp, BP_PORT(bp) ? + PRS_REG_HDRS_AFTER_TAG_0_PORT_1 : + PRS_REG_HDRS_AFTER_TAG_0_PORT_0, 0x6); + REG_WR(bp, BP_PORT(bp) ? + PRS_REG_MUST_HAVE_HDRS_PORT_1 : + PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA); + } else { + /* Ovlan exists only if we are in multi-function + + * switch-dependent mode, in switch-independent there + * is no ovlan headers + */ + REG_WR(bp, BP_PORT(bp) ? + PRS_REG_HDRS_AFTER_BASIC_PORT_1 : + PRS_REG_HDRS_AFTER_BASIC_PORT_0, + (bp->path_has_ovlan ? 7 : 6)); + } + } + + bnx2x_init_block(bp, BLOCK_TSDM, init_phase); + bnx2x_init_block(bp, BLOCK_CSDM, init_phase); + bnx2x_init_block(bp, BLOCK_USDM, init_phase); + bnx2x_init_block(bp, BLOCK_XSDM, init_phase); + + bnx2x_init_block(bp, BLOCK_TSEM, init_phase); + bnx2x_init_block(bp, BLOCK_USEM, init_phase); + bnx2x_init_block(bp, BLOCK_CSEM, init_phase); + bnx2x_init_block(bp, BLOCK_XSEM, init_phase); + + bnx2x_init_block(bp, BLOCK_UPB, init_phase); + bnx2x_init_block(bp, BLOCK_XPB, init_phase); + + bnx2x_init_block(bp, BLOCK_PBF, init_phase); + + if (CHIP_IS_E1x(bp)) { + /* configure PBF to work without PAUSE mtu 9000 */ + REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0); + + /* update threshold */ + REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, (9040/16)); + /* update init credit */ + REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22); + + /* probe changes */ + REG_WR(bp, PBF_REG_INIT_P0 + port*4, 1); + udelay(50); + REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0); + } + + if (CNIC_SUPPORT(bp)) + bnx2x_init_block(bp, BLOCK_SRC, init_phase); + + bnx2x_init_block(bp, BLOCK_CDU, init_phase); + bnx2x_init_block(bp, BLOCK_CFC, init_phase); + + if (CHIP_IS_E1(bp)) { + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); + } + bnx2x_init_block(bp, BLOCK_HC, init_phase); + + bnx2x_init_block(bp, BLOCK_IGU, init_phase); + + bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase); + /* init aeu_mask_attn_func_0/1: + * - SF mode: bits 3-7 are masked. Only bits 0-2 are in use + * - MF mode: bit 3 is masked. Bits 0-2 are in use as in SF + * bits 4-7 are used for "per vn group attention" */ + val = IS_MF(bp) ? 0xF7 : 0x7; + /* Enable DCBX attention for all but E1 */ + val |= CHIP_IS_E1(bp) ? 0 : 0x10; + REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val); + + /* SCPAD_PARITY should NOT trigger close the gates */ + reg = port ? MISC_REG_AEU_ENABLE4_NIG_1 : MISC_REG_AEU_ENABLE4_NIG_0; + REG_WR(bp, reg, + REG_RD(bp, reg) & + ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); + + reg = port ? MISC_REG_AEU_ENABLE4_PXP_1 : MISC_REG_AEU_ENABLE4_PXP_0; + REG_WR(bp, reg, + REG_RD(bp, reg) & + ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); + + bnx2x_init_block(bp, BLOCK_NIG, init_phase); + + if (!CHIP_IS_E1x(bp)) { + /* Bit-map indicating which L2 hdrs may appear after the + * basic Ethernet header + */ + if (IS_MF_AFEX(bp)) + REG_WR(bp, BP_PORT(bp) ? + NIG_REG_P1_HDRS_AFTER_BASIC : + NIG_REG_P0_HDRS_AFTER_BASIC, 0xE); + else + REG_WR(bp, BP_PORT(bp) ? + NIG_REG_P1_HDRS_AFTER_BASIC : + NIG_REG_P0_HDRS_AFTER_BASIC, + IS_MF_SD(bp) ? 7 : 6); + + if (CHIP_IS_E3(bp)) + REG_WR(bp, BP_PORT(bp) ? + NIG_REG_LLH1_MF_MODE : + NIG_REG_LLH_MF_MODE, IS_MF(bp)); + } + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); + + if (!CHIP_IS_E1(bp)) { + /* 0x2 disable mf_ov, 0x1 enable */ + REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4, + (IS_MF_SD(bp) ? 0x1 : 0x2)); + + if (!CHIP_IS_E1x(bp)) { + val = 0; + switch (bp->mf_mode) { + case MULTI_FUNCTION_SD: + val = 1; + break; + case MULTI_FUNCTION_SI: + case MULTI_FUNCTION_AFEX: + val = 2; + break; + } + + REG_WR(bp, (BP_PORT(bp) ? NIG_REG_LLH1_CLS_TYPE : + NIG_REG_LLH0_CLS_TYPE), val); + } + { + REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0); + REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0); + REG_WR(bp, NIG_REG_PAUSE_ENABLE_0 + port*4, 1); + } + } + + /* If SPIO5 is set to generate interrupts, enable it for this port */ + val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); + if (val & MISC_SPIO_SPIO5) { + u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + val = REG_RD(bp, reg_addr); + val |= AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, reg_addr, val); + } + + return 0; +} + +static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr) +{ + int reg; + u32 wb_write[2]; + + if (CHIP_IS_E1(bp)) + reg = PXP2_REG_RQ_ONCHIP_AT + index*8; + else + reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8; + + wb_write[0] = ONCHIP_ADDR1(addr); + wb_write[1] = ONCHIP_ADDR2(addr); + REG_WR_DMAE(bp, reg, wb_write, 2); +} + +void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, bool is_pf) +{ + u32 data, ctl, cnt = 100; + u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA; + u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL; + u32 igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP + (idu_sb_id/32)*4; + u32 sb_bit = 1 << (idu_sb_id%32); + u32 func_encode = func | (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT; + u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id; + + /* Not supported in BC mode */ + if (CHIP_INT_MODE_IS_BC(bp)) + return; + + data = (IGU_USE_REGISTER_cstorm_type_0_sb_cleanup + << IGU_REGULAR_CLEANUP_TYPE_SHIFT) | + IGU_REGULAR_CLEANUP_SET | + IGU_REGULAR_BCLEANUP; + + ctl = addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT | + func_encode << IGU_CTRL_REG_FID_SHIFT | + IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT; + + DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", + data, igu_addr_data); + REG_WR(bp, igu_addr_data, data); + mmiowb(); + barrier(); + DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", + ctl, igu_addr_ctl); + REG_WR(bp, igu_addr_ctl, ctl); + mmiowb(); + barrier(); + + /* wait for clean up to finish */ + while (!(REG_RD(bp, igu_addr_ack) & sb_bit) && --cnt) + msleep(20); + + if (!(REG_RD(bp, igu_addr_ack) & sb_bit)) { + DP(NETIF_MSG_HW, + "Unable to finish IGU cleanup: idu_sb_id %d offset %d bit %d (cnt %d)\n", + idu_sb_id, idu_sb_id/32, idu_sb_id%32, cnt); + } +} + +static void bnx2x_igu_clear_sb(struct bnx2x *bp, u8 idu_sb_id) +{ + bnx2x_igu_clear_sb_gen(bp, BP_FUNC(bp), idu_sb_id, true /*PF*/); +} + +static void bnx2x_clear_func_ilt(struct bnx2x *bp, u32 func) +{ + u32 i, base = FUNC_ILT_BASE(func); + for (i = base; i < base + ILT_PER_FUNC; i++) + bnx2x_ilt_wr(bp, i, 0); +} + +static void bnx2x_init_searcher(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + bnx2x_src_init_t2(bp, bp->t2, bp->t2_mapping, SRC_CONN_NUM); + /* T1 hash bits value determines the T1 number of entries */ + REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, SRC_HASH_BITS); +} + +static inline int bnx2x_func_switch_update(struct bnx2x *bp, int suspend) +{ + int rc; + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_switch_update_params *switch_update_params = + &func_params.params.switch_update; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; + + /* Function parameters */ + __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG, + &switch_update_params->changes); + if (suspend) + __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND, + &switch_update_params->changes); + + rc = bnx2x_func_state_change(bp, &func_params); + + return rc; +} + +static int bnx2x_reset_nic_mode(struct bnx2x *bp) +{ + int rc, i, port = BP_PORT(bp); + int vlan_en = 0, mac_en[NUM_MACS]; + + /* Close input from network */ + if (bp->mf_mode == SINGLE_FUNCTION) { + bnx2x_set_rx_filter(&bp->link_params, 0); + } else { + vlan_en = REG_RD(bp, port ? NIG_REG_LLH1_FUNC_EN : + NIG_REG_LLH0_FUNC_EN); + REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN : + NIG_REG_LLH0_FUNC_EN, 0); + for (i = 0; i < NUM_MACS; i++) { + mac_en[i] = REG_RD(bp, port ? + (NIG_REG_LLH1_FUNC_MEM_ENABLE + + 4 * i) : + (NIG_REG_LLH0_FUNC_MEM_ENABLE + + 4 * i)); + REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE + + 4 * i) : + (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i), 0); + } + } + + /* Close BMC to host */ + REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE : + NIG_REG_P1_TX_MNG_HOST_ENABLE, 0); + + /* Suspend Tx switching to the PF. Completion of this ramrod + * further guarantees that all the packets of that PF / child + * VFs in BRB were processed by the Parser, so it is safe to + * change the NIC_MODE register. + */ + rc = bnx2x_func_switch_update(bp, 1); + if (rc) { + BNX2X_ERR("Can't suspend tx-switching!\n"); + return rc; + } + + /* Change NIC_MODE register */ + REG_WR(bp, PRS_REG_NIC_MODE, 0); + + /* Open input from network */ + if (bp->mf_mode == SINGLE_FUNCTION) { + bnx2x_set_rx_filter(&bp->link_params, 1); + } else { + REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN : + NIG_REG_LLH0_FUNC_EN, vlan_en); + for (i = 0; i < NUM_MACS; i++) { + REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE + + 4 * i) : + (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i), + mac_en[i]); + } + } + + /* Enable BMC to host */ + REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE : + NIG_REG_P1_TX_MNG_HOST_ENABLE, 1); + + /* Resume Tx switching to the PF */ + rc = bnx2x_func_switch_update(bp, 0); + if (rc) { + BNX2X_ERR("Can't resume tx-switching!\n"); + return rc; + } + + DP(NETIF_MSG_IFUP, "NIC MODE disabled\n"); + return 0; +} + +int bnx2x_init_hw_func_cnic(struct bnx2x *bp) +{ + int rc; + + bnx2x_ilt_init_op_cnic(bp, INITOP_SET); + + if (CONFIGURE_NIC_MODE(bp)) { + /* Configure searcher as part of function hw init */ + bnx2x_init_searcher(bp); + + /* Reset NIC mode */ + rc = bnx2x_reset_nic_mode(bp); + if (rc) + BNX2X_ERR("Can't change NIC mode!\n"); + return rc; + } + + return 0; +} + +/* previous driver DMAE transaction may have occurred when pre-boot stage ended + * and boot began, or when kdump kernel was loaded. Either case would invalidate + * the addresses of the transaction, resulting in was-error bit set in the pci + * causing all hw-to-host pcie transactions to timeout. If this happened we want + * to clear the interrupt which detected this from the pglueb and the was done + * bit + */ +static void bnx2x_clean_pglue_errors(struct bnx2x *bp) +{ + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, + 1 << BP_ABS_FUNC(bp)); +} + +static int bnx2x_init_hw_func(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int func = BP_FUNC(bp); + int init_phase = PHASE_PF0 + func; + struct bnx2x_ilt *ilt = BP_ILT(bp); + u16 cdu_ilt_start; + u32 addr, val; + u32 main_mem_base, main_mem_size, main_mem_prty_clr; + int i, main_mem_width, rc; + + DP(NETIF_MSG_HW, "starting func init func %d\n", func); + + /* FLR cleanup - hmmm */ + if (!CHIP_IS_E1x(bp)) { + rc = bnx2x_pf_flr_clnup(bp); + if (rc) { + bnx2x_fw_dump(bp); + return rc; + } + } + + /* set MSI reconfigure capability */ + if (bp->common.int_block == INT_BLOCK_HC) { + addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0); + val = REG_RD(bp, addr); + val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0; + REG_WR(bp, addr, val); + } + + bnx2x_init_block(bp, BLOCK_PXP, init_phase); + bnx2x_init_block(bp, BLOCK_PXP2, init_phase); + + ilt = BP_ILT(bp); + cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; + + if (IS_SRIOV(bp)) + cdu_ilt_start += BNX2X_FIRST_VF_CID/ILT_PAGE_CIDS; + cdu_ilt_start = bnx2x_iov_init_ilt(bp, cdu_ilt_start); + + /* since BNX2X_FIRST_VF_CID > 0 the PF L2 cids precedes + * those of the VFs, so start line should be reset + */ + cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; + for (i = 0; i < L2_ILT_LINES(bp); i++) { + ilt->lines[cdu_ilt_start + i].page = bp->context[i].vcxt; + ilt->lines[cdu_ilt_start + i].page_mapping = + bp->context[i].cxt_mapping; + ilt->lines[cdu_ilt_start + i].size = bp->context[i].size; + } + + bnx2x_ilt_init_op(bp, INITOP_SET); + + if (!CONFIGURE_NIC_MODE(bp)) { + bnx2x_init_searcher(bp); + REG_WR(bp, PRS_REG_NIC_MODE, 0); + DP(NETIF_MSG_IFUP, "NIC MODE disabled\n"); + } else { + /* Set NIC mode */ + REG_WR(bp, PRS_REG_NIC_MODE, 1); + DP(NETIF_MSG_IFUP, "NIC MODE configured\n"); + } + + if (!CHIP_IS_E1x(bp)) { + u32 pf_conf = IGU_PF_CONF_FUNC_EN; + + /* Turn on a single ISR mode in IGU if driver is going to use + * INT#x or MSI + */ + if (!(bp->flags & USING_MSIX_FLAG)) + pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN; + /* + * Timers workaround bug: function init part. + * Need to wait 20msec after initializing ILT, + * needed to make sure there are no requests in + * one of the PXP internal queues with "old" ILT addresses + */ + msleep(20); + /* + * Master enable - Due to WB DMAE writes performed before this + * register is re-initialized as part of the regular function + * init + */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); + /* Enable the function in IGU */ + REG_WR(bp, IGU_REG_PF_CONFIGURATION, pf_conf); + } + + bp->dmae_ready = 1; + + bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); + + bnx2x_clean_pglue_errors(bp); + + bnx2x_init_block(bp, BLOCK_ATC, init_phase); + bnx2x_init_block(bp, BLOCK_DMAE, init_phase); + bnx2x_init_block(bp, BLOCK_NIG, init_phase); + bnx2x_init_block(bp, BLOCK_SRC, init_phase); + bnx2x_init_block(bp, BLOCK_MISC, init_phase); + bnx2x_init_block(bp, BLOCK_TCM, init_phase); + bnx2x_init_block(bp, BLOCK_UCM, init_phase); + bnx2x_init_block(bp, BLOCK_CCM, init_phase); + bnx2x_init_block(bp, BLOCK_XCM, init_phase); + bnx2x_init_block(bp, BLOCK_TSEM, init_phase); + bnx2x_init_block(bp, BLOCK_USEM, init_phase); + bnx2x_init_block(bp, BLOCK_CSEM, init_phase); + bnx2x_init_block(bp, BLOCK_XSEM, init_phase); + + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, QM_REG_PF_EN, 1); + + if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + REG_WR(bp, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + } + bnx2x_init_block(bp, BLOCK_QM, init_phase); + + bnx2x_init_block(bp, BLOCK_TM, init_phase); + bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + REG_WR(bp, DORQ_REG_MODE_ACT, 1); /* no dpm */ + + bnx2x_iov_init_dq(bp); + + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); + bnx2x_init_block(bp, BLOCK_PRS, init_phase); + bnx2x_init_block(bp, BLOCK_TSDM, init_phase); + bnx2x_init_block(bp, BLOCK_CSDM, init_phase); + bnx2x_init_block(bp, BLOCK_USDM, init_phase); + bnx2x_init_block(bp, BLOCK_XSDM, init_phase); + bnx2x_init_block(bp, BLOCK_UPB, init_phase); + bnx2x_init_block(bp, BLOCK_XPB, init_phase); + bnx2x_init_block(bp, BLOCK_PBF, init_phase); + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PBF_REG_DISABLE_PF, 0); + + bnx2x_init_block(bp, BLOCK_CDU, init_phase); + + bnx2x_init_block(bp, BLOCK_CFC, init_phase); + + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 1); + + if (IS_MF(bp)) { + if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) { + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1); + REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, + bp->mf_ov); + } + } + + bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase); + + /* HC init per function */ + if (bp->common.int_block == INT_BLOCK_HC) { + if (CHIP_IS_E1H(bp)) { + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); + + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); + } + bnx2x_init_block(bp, BLOCK_HC, init_phase); + + } else { + int num_segs, sb_idx, prod_offset; + + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); + + if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0); + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0); + } + + bnx2x_init_block(bp, BLOCK_IGU, init_phase); + + if (!CHIP_IS_E1x(bp)) { + int dsb_idx = 0; + /** + * Producer memory: + * E2 mode: address 0-135 match to the mapping memory; + * 136 - PF0 default prod; 137 - PF1 default prod; + * 138 - PF2 default prod; 139 - PF3 default prod; + * 140 - PF0 attn prod; 141 - PF1 attn prod; + * 142 - PF2 attn prod; 143 - PF3 attn prod; + * 144-147 reserved. + * + * E1.5 mode - In backward compatible mode; + * for non default SB; each even line in the memory + * holds the U producer and each odd line hold + * the C producer. The first 128 producers are for + * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20 + * producers are for the DSB for each PF. + * Each PF has five segments: (the order inside each + * segment is PF0; PF1; PF2; PF3) - 128-131 U prods; + * 132-135 C prods; 136-139 X prods; 140-143 T prods; + * 144-147 attn prods; + */ + /* non-default-status-blocks */ + num_segs = CHIP_INT_MODE_IS_BC(bp) ? + IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS; + for (sb_idx = 0; sb_idx < bp->igu_sb_cnt; sb_idx++) { + prod_offset = (bp->igu_base_sb + sb_idx) * + num_segs; + + for (i = 0; i < num_segs; i++) { + addr = IGU_REG_PROD_CONS_MEMORY + + (prod_offset + i) * 4; + REG_WR(bp, addr, 0); + } + /* send consumer update with value 0 */ + bnx2x_ack_sb(bp, bp->igu_base_sb + sb_idx, + USTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_igu_clear_sb(bp, + bp->igu_base_sb + sb_idx); + } + + /* default-status-blocks */ + num_segs = CHIP_INT_MODE_IS_BC(bp) ? + IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS; + + if (CHIP_MODE_IS_4_PORT(bp)) + dsb_idx = BP_FUNC(bp); + else + dsb_idx = BP_VN(bp); + + prod_offset = (CHIP_INT_MODE_IS_BC(bp) ? + IGU_BC_BASE_DSB_PROD + dsb_idx : + IGU_NORM_BASE_DSB_PROD + dsb_idx); + + /* + * igu prods come in chunks of E1HVN_MAX (4) - + * does not matters what is the current chip mode + */ + for (i = 0; i < (num_segs * E1HVN_MAX); + i += E1HVN_MAX) { + addr = IGU_REG_PROD_CONS_MEMORY + + (prod_offset + i)*4; + REG_WR(bp, addr, 0); + } + /* send consumer update with 0 */ + if (CHIP_INT_MODE_IS_BC(bp)) { + bnx2x_ack_sb(bp, bp->igu_dsb_id, + USTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + CSTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + XSTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + TSTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + ATTENTION_ID, 0, IGU_INT_NOP, 1); + } else { + bnx2x_ack_sb(bp, bp->igu_dsb_id, + USTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + ATTENTION_ID, 0, IGU_INT_NOP, 1); + } + bnx2x_igu_clear_sb(bp, bp->igu_dsb_id); + + /* !!! These should become driver const once + rf-tool supports split-68 const */ + REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0); + REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0); + REG_WR(bp, IGU_REG_SB_MASK_LSB, 0); + REG_WR(bp, IGU_REG_SB_MASK_MSB, 0); + REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0); + REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0); + } + } + + /* Reset PCIE errors for debug */ + REG_WR(bp, 0x2114, 0xffffffff); + REG_WR(bp, 0x2120, 0xffffffff); + + if (CHIP_IS_E1x(bp)) { + main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords*/ + main_mem_base = HC_REG_MAIN_MEMORY + + BP_PORT(bp) * (main_mem_size * 4); + main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR; + main_mem_width = 8; + + val = REG_RD(bp, main_mem_prty_clr); + if (val) + DP(NETIF_MSG_HW, + "Hmmm... Parity errors in HC block during function init (0x%x)!\n", + val); + + /* Clear "false" parity errors in MSI-X table */ + for (i = main_mem_base; + i < main_mem_base + main_mem_size * 4; + i += main_mem_width) { + bnx2x_read_dmae(bp, i, main_mem_width / 4); + bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), + i, main_mem_width / 4); + } + /* Clear HC parity attention */ + REG_RD(bp, main_mem_prty_clr); + } + +#ifdef BNX2X_STOP_ON_ERROR + /* Enable STORMs SP logging */ + REG_WR8(bp, BAR_USTRORM_INTMEM + + USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); + REG_WR8(bp, BAR_TSTRORM_INTMEM + + TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); + REG_WR8(bp, BAR_XSTRORM_INTMEM + + XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); +#endif + + bnx2x_phy_probe(&bp->link_params); + + return 0; +} + +void bnx2x_free_mem_cnic(struct bnx2x *bp) +{ + bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_FREE); + + if (!CHIP_IS_E1x(bp)) + BNX2X_PCI_FREE(bp->cnic_sb.e2_sb, bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e2)); + else + BNX2X_PCI_FREE(bp->cnic_sb.e1x_sb, bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e1x)); + + BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ); +} + +void bnx2x_free_mem(struct bnx2x *bp) +{ + int i; + + BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping, + bp->fw_stats_data_sz + bp->fw_stats_req_sz); + + if (IS_VF(bp)) + return; + + BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping, + sizeof(struct host_sp_status_block)); + + BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping, + sizeof(struct bnx2x_slowpath)); + + for (i = 0; i < L2_ILT_LINES(bp); i++) + BNX2X_PCI_FREE(bp->context[i].vcxt, bp->context[i].cxt_mapping, + bp->context[i].size); + bnx2x_ilt_mem_op(bp, ILT_MEMOP_FREE); + + BNX2X_FREE(bp->ilt->lines); + + BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE); + + BNX2X_PCI_FREE(bp->eq_ring, bp->eq_mapping, + BCM_PAGE_SIZE * NUM_EQ_PAGES); + + BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ); + + bnx2x_iov_free_mem(bp); +} + +int bnx2x_alloc_mem_cnic(struct bnx2x *bp) +{ + if (!CHIP_IS_E1x(bp)) { + /* size = the status block + ramrod buffers */ + bp->cnic_sb.e2_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e2)); + if (!bp->cnic_sb.e2_sb) + goto alloc_mem_err; + } else { + bp->cnic_sb.e1x_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e1x)); + if (!bp->cnic_sb.e1x_sb) + goto alloc_mem_err; + } + + if (CONFIGURE_NIC_MODE(bp) && !bp->t2) { + /* allocate searcher T2 table, as it wasn't allocated before */ + bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ); + if (!bp->t2) + goto alloc_mem_err; + } + + /* write address to which L5 should insert its values */ + bp->cnic_eth_dev.addr_drv_info_to_mcp = + &bp->slowpath->drv_info_to_mcp; + + if (bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_ALLOC)) + goto alloc_mem_err; + + return 0; + +alloc_mem_err: + bnx2x_free_mem_cnic(bp); + BNX2X_ERR("Can't allocate memory\n"); + return -ENOMEM; +} + +int bnx2x_alloc_mem(struct bnx2x *bp) +{ + int i, allocated, context_size; + + if (!CONFIGURE_NIC_MODE(bp) && !bp->t2) { + /* allocate searcher T2 table */ + bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ); + if (!bp->t2) + goto alloc_mem_err; + } + + bp->def_status_blk = BNX2X_PCI_ALLOC(&bp->def_status_blk_mapping, + sizeof(struct host_sp_status_block)); + if (!bp->def_status_blk) + goto alloc_mem_err; + + bp->slowpath = BNX2X_PCI_ALLOC(&bp->slowpath_mapping, + sizeof(struct bnx2x_slowpath)); + if (!bp->slowpath) + goto alloc_mem_err; + + /* Allocate memory for CDU context: + * This memory is allocated separately and not in the generic ILT + * functions because CDU differs in few aspects: + * 1. There are multiple entities allocating memory for context - + * 'regular' driver, CNIC and SRIOV driver. Each separately controls + * its own ILT lines. + * 2. Since CDU page-size is not a single 4KB page (which is the case + * for the other ILT clients), to be efficient we want to support + * allocation of sub-page-size in the last entry. + * 3. Context pointers are used by the driver to pass to FW / update + * the context (for the other ILT clients the pointers are used just to + * free the memory during unload). + */ + context_size = sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(bp); + + for (i = 0, allocated = 0; allocated < context_size; i++) { + bp->context[i].size = min(CDU_ILT_PAGE_SZ, + (context_size - allocated)); + bp->context[i].vcxt = BNX2X_PCI_ALLOC(&bp->context[i].cxt_mapping, + bp->context[i].size); + if (!bp->context[i].vcxt) + goto alloc_mem_err; + allocated += bp->context[i].size; + } + bp->ilt->lines = kcalloc(ILT_MAX_LINES, sizeof(struct ilt_line), + GFP_KERNEL); + if (!bp->ilt->lines) + goto alloc_mem_err; + + if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC)) + goto alloc_mem_err; + + if (bnx2x_iov_alloc_mem(bp)) + goto alloc_mem_err; + + /* Slow path ring */ + bp->spq = BNX2X_PCI_ALLOC(&bp->spq_mapping, BCM_PAGE_SIZE); + if (!bp->spq) + goto alloc_mem_err; + + /* EQ */ + bp->eq_ring = BNX2X_PCI_ALLOC(&bp->eq_mapping, + BCM_PAGE_SIZE * NUM_EQ_PAGES); + if (!bp->eq_ring) + goto alloc_mem_err; + + return 0; + +alloc_mem_err: + bnx2x_free_mem(bp); + BNX2X_ERR("Can't allocate memory\n"); + return -ENOMEM; +} + +/* + * Init service functions + */ + +int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac, + struct bnx2x_vlan_mac_obj *obj, bool set, + int mac_type, unsigned long *ramrod_flags) +{ + int rc; + struct bnx2x_vlan_mac_ramrod_params ramrod_param; + + memset(&ramrod_param, 0, sizeof(ramrod_param)); + + /* Fill general parameters */ + ramrod_param.vlan_mac_obj = obj; + ramrod_param.ramrod_flags = *ramrod_flags; + + /* Fill a user request section if needed */ + if (!test_bit(RAMROD_CONT, ramrod_flags)) { + memcpy(ramrod_param.user_req.u.mac.mac, mac, ETH_ALEN); + + __set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags); + + /* Set the command: ADD or DEL */ + if (set) + ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; + else + ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL; + } + + rc = bnx2x_config_vlan_mac(bp, &ramrod_param); + + if (rc == -EEXIST) { + DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc); + /* do not treat adding same MAC as error */ + rc = 0; + } else if (rc < 0) + BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del")); + + return rc; +} + +int bnx2x_del_all_macs(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *mac_obj, + int mac_type, bool wait_for_comp) +{ + int rc; + unsigned long ramrod_flags = 0, vlan_mac_flags = 0; + + /* Wait for completion of requested */ + if (wait_for_comp) + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + + /* Set the mac type of addresses we want to clear */ + __set_bit(mac_type, &vlan_mac_flags); + + rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, &ramrod_flags); + if (rc < 0) + BNX2X_ERR("Failed to delete MACs: %d\n", rc); + + return rc; +} + +int bnx2x_set_eth_mac(struct bnx2x *bp, bool set) +{ + if (IS_PF(bp)) { + unsigned long ramrod_flags = 0; + + DP(NETIF_MSG_IFUP, "Adding Eth MAC\n"); + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + return bnx2x_set_mac_one(bp, bp->dev->dev_addr, + &bp->sp_objs->mac_obj, set, + BNX2X_ETH_MAC, &ramrod_flags); + } else { /* vf */ + return bnx2x_vfpf_config_mac(bp, bp->dev->dev_addr, + bp->fp->index, true); + } +} + +int bnx2x_setup_leading(struct bnx2x *bp) +{ + if (IS_PF(bp)) + return bnx2x_setup_queue(bp, &bp->fp[0], true); + else /* VF */ + return bnx2x_vfpf_setup_q(bp, &bp->fp[0], true); +} + +/** + * bnx2x_set_int_mode - configure interrupt mode + * + * @bp: driver handle + * + * In case of MSI-X it will also try to enable MSI-X. + */ +int bnx2x_set_int_mode(struct bnx2x *bp) +{ + int rc = 0; + + if (IS_VF(bp) && int_mode != BNX2X_INT_MODE_MSIX) { + BNX2X_ERR("VF not loaded since interrupt mode not msix\n"); + return -EINVAL; + } + + switch (int_mode) { + case BNX2X_INT_MODE_MSIX: + /* attempt to enable msix */ + rc = bnx2x_enable_msix(bp); + + /* msix attained */ + if (!rc) + return 0; + + /* vfs use only msix */ + if (rc && IS_VF(bp)) + return rc; + + /* failed to enable multiple MSI-X */ + BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n", + bp->num_queues, + 1 + bp->num_cnic_queues); + + /* falling through... */ + case BNX2X_INT_MODE_MSI: + bnx2x_enable_msi(bp); + + /* falling through... */ + case BNX2X_INT_MODE_INTX: + bp->num_ethernet_queues = 1; + bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues; + BNX2X_DEV_INFO("set number of queues to 1\n"); + break; + default: + BNX2X_DEV_INFO("unknown value in int_mode module parameter\n"); + return -EINVAL; + } + return 0; +} + +/* must be called prior to any HW initializations */ +static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp) +{ + if (IS_SRIOV(bp)) + return (BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS)/ILT_PAGE_CIDS; + return L2_ILT_LINES(bp); +} + +void bnx2x_ilt_set_info(struct bnx2x *bp) +{ + struct ilt_client_info *ilt_client; + struct bnx2x_ilt *ilt = BP_ILT(bp); + u16 line = 0; + + ilt->start_line = FUNC_ILT_BASE(BP_FUNC(bp)); + DP(BNX2X_MSG_SP, "ilt starts at line %d\n", ilt->start_line); + + /* CDU */ + ilt_client = &ilt->clients[ILT_CLIENT_CDU]; + ilt_client->client_num = ILT_CLIENT_CDU; + ilt_client->page_size = CDU_ILT_PAGE_SZ; + ilt_client->flags = ILT_CLIENT_SKIP_MEM; + ilt_client->start = line; + line += bnx2x_cid_ilt_lines(bp); + + if (CNIC_SUPPORT(bp)) + line += CNIC_ILT_LINES; + ilt_client->end = line - 1; + + DP(NETIF_MSG_IFUP, "ilt client[CDU]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + + /* QM */ + if (QM_INIT(bp->qm_cid_count)) { + ilt_client = &ilt->clients[ILT_CLIENT_QM]; + ilt_client->client_num = ILT_CLIENT_QM; + ilt_client->page_size = QM_ILT_PAGE_SZ; + ilt_client->flags = 0; + ilt_client->start = line; + + /* 4 bytes for each cid */ + line += DIV_ROUND_UP(bp->qm_cid_count * QM_QUEUES_PER_FUNC * 4, + QM_ILT_PAGE_SZ); + + ilt_client->end = line - 1; + + DP(NETIF_MSG_IFUP, + "ilt client[QM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + } + + if (CNIC_SUPPORT(bp)) { + /* SRC */ + ilt_client = &ilt->clients[ILT_CLIENT_SRC]; + ilt_client->client_num = ILT_CLIENT_SRC; + ilt_client->page_size = SRC_ILT_PAGE_SZ; + ilt_client->flags = 0; + ilt_client->start = line; + line += SRC_ILT_LINES; + ilt_client->end = line - 1; + + DP(NETIF_MSG_IFUP, + "ilt client[SRC]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + + /* TM */ + ilt_client = &ilt->clients[ILT_CLIENT_TM]; + ilt_client->client_num = ILT_CLIENT_TM; + ilt_client->page_size = TM_ILT_PAGE_SZ; + ilt_client->flags = 0; + ilt_client->start = line; + line += TM_ILT_LINES; + ilt_client->end = line - 1; + + DP(NETIF_MSG_IFUP, + "ilt client[TM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + } + + BUG_ON(line > ILT_MAX_LINES); +} + +/** + * bnx2x_pf_q_prep_init - prepare INIT transition parameters + * + * @bp: driver handle + * @fp: pointer to fastpath + * @init_params: pointer to parameters structure + * + * parameters configured: + * - HC configuration + * - Queue's CDU context + */ +static void bnx2x_pf_q_prep_init(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct bnx2x_queue_init_params *init_params) +{ + u8 cos; + int cxt_index, cxt_offset; + + /* FCoE Queue uses Default SB, thus has no HC capabilities */ + if (!IS_FCOE_FP(fp)) { + __set_bit(BNX2X_Q_FLG_HC, &init_params->rx.flags); + __set_bit(BNX2X_Q_FLG_HC, &init_params->tx.flags); + + /* If HC is supported, enable host coalescing in the transition + * to INIT state. + */ + __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->rx.flags); + __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->tx.flags); + + /* HC rate */ + init_params->rx.hc_rate = bp->rx_ticks ? + (1000000 / bp->rx_ticks) : 0; + init_params->tx.hc_rate = bp->tx_ticks ? + (1000000 / bp->tx_ticks) : 0; + + /* FW SB ID */ + init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = + fp->fw_sb_id; + + /* + * CQ index among the SB indices: FCoE clients uses the default + * SB, therefore it's different. + */ + init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS; + init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS; + } + + /* set maximum number of COSs supported by this queue */ + init_params->max_cos = fp->max_cos; + + DP(NETIF_MSG_IFUP, "fp: %d setting queue params max cos to: %d\n", + fp->index, init_params->max_cos); + + /* set the context pointers queue object */ + for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) { + cxt_index = fp->txdata_ptr[cos]->cid / ILT_PAGE_CIDS; + cxt_offset = fp->txdata_ptr[cos]->cid - (cxt_index * + ILT_PAGE_CIDS); + init_params->cxts[cos] = + &bp->context[cxt_index].vcxt[cxt_offset].eth; + } +} + +static int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp, + struct bnx2x_queue_state_params *q_params, + struct bnx2x_queue_setup_tx_only_params *tx_only_params, + int tx_index, bool leading) +{ + memset(tx_only_params, 0, sizeof(*tx_only_params)); + + /* Set the command */ + q_params->cmd = BNX2X_Q_CMD_SETUP_TX_ONLY; + + /* Set tx-only QUEUE flags: don't zero statistics */ + tx_only_params->flags = bnx2x_get_common_flags(bp, fp, false); + + /* choose the index of the cid to send the slow path on */ + tx_only_params->cid_index = tx_index; + + /* Set general TX_ONLY_SETUP parameters */ + bnx2x_pf_q_prep_general(bp, fp, &tx_only_params->gen_params, tx_index); + + /* Set Tx TX_ONLY_SETUP parameters */ + bnx2x_pf_tx_q_prep(bp, fp, &tx_only_params->txq_params, tx_index); + + DP(NETIF_MSG_IFUP, + "preparing to send tx-only ramrod for connection: cos %d, primary cid %d, cid %d, client id %d, sp-client id %d, flags %lx\n", + tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX], + q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id, + tx_only_params->gen_params.spcl_id, tx_only_params->flags); + + /* send the ramrod */ + return bnx2x_queue_state_change(bp, q_params); +} + +/** + * bnx2x_setup_queue - setup queue + * + * @bp: driver handle + * @fp: pointer to fastpath + * @leading: is leading + * + * This function performs 2 steps in a Queue state machine + * actually: 1) RESET->INIT 2) INIT->SETUP + */ + +int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp, + bool leading) +{ + struct bnx2x_queue_state_params q_params = {NULL}; + struct bnx2x_queue_setup_params *setup_params = + &q_params.params.setup; + struct bnx2x_queue_setup_tx_only_params *tx_only_params = + &q_params.params.tx_only; + int rc; + u8 tx_index; + + DP(NETIF_MSG_IFUP, "setting up queue %d\n", fp->index); + + /* reset IGU state skip FCoE L2 queue */ + if (!IS_FCOE_FP(fp)) + bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, + IGU_INT_ENABLE, 0); + + q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + /* We want to wait for completion in this context */ + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + + /* Prepare the INIT parameters */ + bnx2x_pf_q_prep_init(bp, fp, &q_params.params.init); + + /* Set the command */ + q_params.cmd = BNX2X_Q_CMD_INIT; + + /* Change the state to INIT */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Queue(%d) INIT failed\n", fp->index); + return rc; + } + + DP(NETIF_MSG_IFUP, "init complete\n"); + + /* Now move the Queue to the SETUP state... */ + memset(setup_params, 0, sizeof(*setup_params)); + + /* Set QUEUE flags */ + setup_params->flags = bnx2x_get_q_flags(bp, fp, leading); + + /* Set general SETUP parameters */ + bnx2x_pf_q_prep_general(bp, fp, &setup_params->gen_params, + FIRST_TX_COS_INDEX); + + bnx2x_pf_rx_q_prep(bp, fp, &setup_params->pause_params, + &setup_params->rxq_params); + + bnx2x_pf_tx_q_prep(bp, fp, &setup_params->txq_params, + FIRST_TX_COS_INDEX); + + /* Set the command */ + q_params.cmd = BNX2X_Q_CMD_SETUP; + + if (IS_FCOE_FP(fp)) + bp->fcoe_init = true; + + /* Change the state to SETUP */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Queue(%d) SETUP failed\n", fp->index); + return rc; + } + + /* loop through the relevant tx-only indices */ + for (tx_index = FIRST_TX_ONLY_COS_INDEX; + tx_index < fp->max_cos; + tx_index++) { + + /* prepare and send tx-only ramrod*/ + rc = bnx2x_setup_tx_only(bp, fp, &q_params, + tx_only_params, tx_index, leading); + if (rc) { + BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n", + fp->index, tx_index); + return rc; + } + } + + return rc; +} + +static int bnx2x_stop_queue(struct bnx2x *bp, int index) +{ + struct bnx2x_fastpath *fp = &bp->fp[index]; + struct bnx2x_fp_txdata *txdata; + struct bnx2x_queue_state_params q_params = {NULL}; + int rc, tx_index; + + DP(NETIF_MSG_IFDOWN, "stopping queue %d cid %d\n", index, fp->cid); + + q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + /* We want to wait for completion in this context */ + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + + /* close tx-only connections */ + for (tx_index = FIRST_TX_ONLY_COS_INDEX; + tx_index < fp->max_cos; + tx_index++){ + + /* ascertain this is a normal queue*/ + txdata = fp->txdata_ptr[tx_index]; + + DP(NETIF_MSG_IFDOWN, "stopping tx-only queue %d\n", + txdata->txq_index); + + /* send halt terminate on tx-only connection */ + q_params.cmd = BNX2X_Q_CMD_TERMINATE; + memset(&q_params.params.terminate, 0, + sizeof(q_params.params.terminate)); + q_params.params.terminate.cid_index = tx_index; + + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + + /* send halt terminate on tx-only connection */ + q_params.cmd = BNX2X_Q_CMD_CFC_DEL; + memset(&q_params.params.cfc_del, 0, + sizeof(q_params.params.cfc_del)); + q_params.params.cfc_del.cid_index = tx_index; + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + } + /* Stop the primary connection: */ + /* ...halt the connection */ + q_params.cmd = BNX2X_Q_CMD_HALT; + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + + /* ...terminate the connection */ + q_params.cmd = BNX2X_Q_CMD_TERMINATE; + memset(&q_params.params.terminate, 0, + sizeof(q_params.params.terminate)); + q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX; + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + /* ...delete cfc entry */ + q_params.cmd = BNX2X_Q_CMD_CFC_DEL; + memset(&q_params.params.cfc_del, 0, + sizeof(q_params.params.cfc_del)); + q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX; + return bnx2x_queue_state_change(bp, &q_params); +} + +static void bnx2x_reset_func(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int func = BP_FUNC(bp); + int i; + + /* Disable the function in the FW */ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0); + + /* FP SBs */ + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id), + SB_DISABLED); + } + + if (CNIC_LOADED(bp)) + /* CNIC SB */ + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET + (bnx2x_cnic_fw_sb_id(bp)), SB_DISABLED); + + /* SP SB */ + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), + SB_DISABLED); + + for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) + REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func), + 0); + + /* Configure IGU */ + if (bp->common.int_block == INT_BLOCK_HC) { + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); + } else { + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0); + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0); + } + + if (CNIC_LOADED(bp)) { + /* Disable Timer scan */ + REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0); + /* + * Wait for at least 10ms and up to 2 second for the timers + * scan to complete + */ + for (i = 0; i < 200; i++) { + usleep_range(10000, 20000); + if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4)) + break; + } + } + /* Clear ILT */ + bnx2x_clear_func_ilt(bp, func); + + /* Timers workaround bug for E2: if this is vnic-3, + * we need to set the entire ilt range for this timers. + */ + if (!CHIP_IS_E1x(bp) && BP_VN(bp) == 3) { + struct ilt_client_info ilt_cli; + /* use dummy TM client */ + memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); + ilt_cli.start = 0; + ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; + ilt_cli.client_num = ILT_CLIENT_TM; + + bnx2x_ilt_boundry_init_op(bp, &ilt_cli, 0, INITOP_CLEAR); + } + + /* this assumes that reset_port() called before reset_func()*/ + if (!CHIP_IS_E1x(bp)) + bnx2x_pf_disable(bp); + + bp->dmae_ready = 0; +} + +static void bnx2x_reset_port(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 val; + + /* Reset physical Link */ + bnx2x__link_reset(bp); + + REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); + + /* Do not rcv packets to BRB */ + REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0); + /* Do not direct rcv packets that are not for MCP to the BRB */ + REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP : + NIG_REG_LLH0_BRB1_NOT_MCP), 0x0); + + /* Configure AEU */ + REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0); + + msleep(100); + /* Check for BRB port occupancy */ + val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4); + if (val) + DP(NETIF_MSG_IFDOWN, + "BRB1 is not empty %d blocks are occupied\n", val); + + /* TODO: Close Doorbell port? */ +} + +static int bnx2x_reset_hw(struct bnx2x *bp, u32 load_code) +{ + struct bnx2x_func_state_params func_params = {NULL}; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_HW_RESET; + + func_params.params.hw_init.load_phase = load_code; + + return bnx2x_func_state_change(bp, &func_params); +} + +static int bnx2x_func_stop(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {NULL}; + int rc; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_STOP; + + /* + * Try to stop the function the 'good way'. If fails (in case + * of a parity error during bnx2x_chip_cleanup()) and we are + * not in a debug mode, perform a state transaction in order to + * enable further HW_RESET transaction. + */ + rc = bnx2x_func_state_change(bp, &func_params); + if (rc) { +#ifdef BNX2X_STOP_ON_ERROR + return rc; +#else + BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry transaction\n"); + __set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags); + return bnx2x_func_state_change(bp, &func_params); +#endif + } + + return 0; +} + +/** + * bnx2x_send_unload_req - request unload mode from the MCP. + * + * @bp: driver handle + * @unload_mode: requested function's unload mode + * + * Return unload mode returned by the MCP: COMMON, PORT or FUNC. + */ +u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode) +{ + u32 reset_code = 0; + int port = BP_PORT(bp); + + /* Select the UNLOAD request mode */ + if (unload_mode == UNLOAD_NORMAL) + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + + else if (bp->flags & NO_WOL_FLAG) + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP; + + else if (bp->wol) { + u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + u8 *mac_addr = bp->dev->dev_addr; + struct pci_dev *pdev = bp->pdev; + u32 val; + u16 pmc; + + /* The mac address is written to entries 1-4 to + * preserve entry 0 which is used by the PMF + */ + u8 entry = (BP_VN(bp) + 1)*8; + + val = (mac_addr[0] << 8) | mac_addr[1]; + EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val); + + val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | + (mac_addr[4] << 8) | mac_addr[5]; + EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val); + + /* Enable the PME and clear the status */ + pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &pmc); + pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS; + pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, pmc); + + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN; + + } else + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + + /* Send the request to the MCP */ + if (!BP_NOMCP(bp)) + reset_code = bnx2x_fw_command(bp, reset_code, 0); + else { + int path = BP_PATH(bp); + + DP(NETIF_MSG_IFDOWN, "NO MCP - load counts[%d] %d, %d, %d\n", + path, bnx2x_load_count[path][0], bnx2x_load_count[path][1], + bnx2x_load_count[path][2]); + bnx2x_load_count[path][0]--; + bnx2x_load_count[path][1 + port]--; + DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts[%d] %d, %d, %d\n", + path, bnx2x_load_count[path][0], bnx2x_load_count[path][1], + bnx2x_load_count[path][2]); + if (bnx2x_load_count[path][0] == 0) + reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON; + else if (bnx2x_load_count[path][1 + port] == 0) + reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT; + else + reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION; + } + + return reset_code; +} + +/** + * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP. + * + * @bp: driver handle + * @keep_link: true iff link should be kept up + */ +void bnx2x_send_unload_done(struct bnx2x *bp, bool keep_link) +{ + u32 reset_param = keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0; + + /* Report UNLOAD_DONE to MCP */ + if (!BP_NOMCP(bp)) + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, reset_param); +} + +static int bnx2x_func_wait_started(struct bnx2x *bp) +{ + int tout = 50; + int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; + + if (!bp->port.pmf) + return 0; + + /* + * (assumption: No Attention from MCP at this stage) + * PMF probably in the middle of TX disable/enable transaction + * 1. Sync IRS for default SB + * 2. Sync SP queue - this guarantees us that attention handling started + * 3. Wait, that TX disable/enable transaction completes + * + * 1+2 guarantee that if DCBx attention was scheduled it already changed + * pending bit of transaction from STARTED-->TX_STOPPED, if we already + * received completion for the transaction the state is TX_STOPPED. + * State will return to STARTED after completion of TX_STOPPED-->STARTED + * transaction. + */ + + /* make sure default SB ISR is done */ + if (msix) + synchronize_irq(bp->msix_table[0].vector); + else + synchronize_irq(bp->pdev->irq); + + flush_workqueue(bnx2x_wq); + flush_workqueue(bnx2x_iov_wq); + + while (bnx2x_func_get_state(bp, &bp->func_obj) != + BNX2X_F_STATE_STARTED && tout--) + msleep(20); + + if (bnx2x_func_get_state(bp, &bp->func_obj) != + BNX2X_F_STATE_STARTED) { +#ifdef BNX2X_STOP_ON_ERROR + BNX2X_ERR("Wrong function state\n"); + return -EBUSY; +#else + /* + * Failed to complete the transaction in a "good way" + * Force both transactions with CLR bit + */ + struct bnx2x_func_state_params func_params = {NULL}; + + DP(NETIF_MSG_IFDOWN, + "Hmmm... Unexpected function state! Forcing STARTED-->TX_STOPPED-->STARTED\n"); + + func_params.f_obj = &bp->func_obj; + __set_bit(RAMROD_DRV_CLR_ONLY, + &func_params.ramrod_flags); + + /* STARTED-->TX_ST0PPED */ + func_params.cmd = BNX2X_F_CMD_TX_STOP; + bnx2x_func_state_change(bp, &func_params); + + /* TX_ST0PPED-->STARTED */ + func_params.cmd = BNX2X_F_CMD_TX_START; + return bnx2x_func_state_change(bp, &func_params); +#endif + } + + return 0; +} + +static void bnx2x_disable_ptp(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + + /* Disable sending PTP packets to host */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : + NIG_REG_P0_LLH_PTP_TO_HOST, 0x0); + + /* Reset PTP event detection rules */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : + NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : + NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF); + + /* Disable the PTP feature */ + REG_WR(bp, port ? NIG_REG_P1_PTP_EN : + NIG_REG_P0_PTP_EN, 0x0); +} + +/* Called during unload, to stop PTP-related stuff */ +static void bnx2x_stop_ptp(struct bnx2x *bp) +{ + /* Cancel PTP work queue. Should be done after the Tx queues are + * drained to prevent additional scheduling. + */ + cancel_work_sync(&bp->ptp_task); + + if (bp->ptp_tx_skb) { + dev_kfree_skb_any(bp->ptp_tx_skb); + bp->ptp_tx_skb = NULL; + } + + /* Disable PTP in HW */ + bnx2x_disable_ptp(bp); + + DP(BNX2X_MSG_PTP, "PTP stop ended successfully\n"); +} + +void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link) +{ + int port = BP_PORT(bp); + int i, rc = 0; + u8 cos; + struct bnx2x_mcast_ramrod_params rparam = {NULL}; + u32 reset_code; + + /* Wait until tx fastpath tasks complete */ + for_each_tx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + for_each_cos_in_tx_queue(fp, cos) + rc = bnx2x_clean_tx_queue(bp, fp->txdata_ptr[cos]); +#ifdef BNX2X_STOP_ON_ERROR + if (rc) + return; +#endif + } + + /* Give HW time to discard old tx messages */ + usleep_range(1000, 2000); + + /* Clean all ETH MACs */ + rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_ETH_MAC, + false); + if (rc < 0) + BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc); + + /* Clean up UC list */ + rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_UC_LIST_MAC, + true); + if (rc < 0) + BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n", + rc); + + /* Disable LLH */ + if (!CHIP_IS_E1(bp)) + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); + + /* Set "drop all" (stop Rx). + * We need to take a netif_addr_lock() here in order to prevent + * a race between the completion code and this code. + */ + netif_addr_lock_bh(bp->dev); + /* Schedule the rx_mode command */ + if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) + set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state); + else + bnx2x_set_storm_rx_mode(bp); + + /* Cleanup multicast configuration */ + rparam.mcast_obj = &bp->mcast_obj; + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); + if (rc < 0) + BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc); + + netif_addr_unlock_bh(bp->dev); + + bnx2x_iov_chip_cleanup(bp); + + /* + * Send the UNLOAD_REQUEST to the MCP. This will return if + * this function should perform FUNC, PORT or COMMON HW + * reset. + */ + reset_code = bnx2x_send_unload_req(bp, unload_mode); + + /* + * (assumption: No Attention from MCP at this stage) + * PMF probably in the middle of TX disable/enable transaction + */ + rc = bnx2x_func_wait_started(bp); + if (rc) { + BNX2X_ERR("bnx2x_func_wait_started failed\n"); +#ifdef BNX2X_STOP_ON_ERROR + return; +#endif + } + + /* Close multi and leading connections + * Completions for ramrods are collected in a synchronous way + */ + for_each_eth_queue(bp, i) + if (bnx2x_stop_queue(bp, i)) +#ifdef BNX2X_STOP_ON_ERROR + return; +#else + goto unload_error; +#endif + + if (CNIC_LOADED(bp)) { + for_each_cnic_queue(bp, i) + if (bnx2x_stop_queue(bp, i)) +#ifdef BNX2X_STOP_ON_ERROR + return; +#else + goto unload_error; +#endif + } + + /* If SP settings didn't get completed so far - something + * very wrong has happen. + */ + if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) + BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n"); + +#ifndef BNX2X_STOP_ON_ERROR +unload_error: +#endif + rc = bnx2x_func_stop(bp); + if (rc) { + BNX2X_ERR("Function stop failed!\n"); +#ifdef BNX2X_STOP_ON_ERROR + return; +#endif + } + + /* stop_ptp should be after the Tx queues are drained to prevent + * scheduling to the cancelled PTP work queue. It should also be after + * function stop ramrod is sent, since as part of this ramrod FW access + * PTP registers. + */ + if (bp->flags & PTP_SUPPORTED) + bnx2x_stop_ptp(bp); + + /* Disable HW interrupts, NAPI */ + bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); + if (CNIC_LOADED(bp)) + bnx2x_del_all_napi_cnic(bp); + + /* Release IRQs */ + bnx2x_free_irq(bp); + + /* Reset the chip */ + rc = bnx2x_reset_hw(bp, reset_code); + if (rc) + BNX2X_ERR("HW_RESET failed\n"); + + /* Report UNLOAD_DONE to MCP */ + bnx2x_send_unload_done(bp, keep_link); +} + +void bnx2x_disable_close_the_gate(struct bnx2x *bp) +{ + u32 val; + + DP(NETIF_MSG_IFDOWN, "Disabling \"close the gates\"\n"); + + if (CHIP_IS_E1(bp)) { + int port = BP_PORT(bp); + u32 addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0; + + val = REG_RD(bp, addr); + val &= ~(0x300); + REG_WR(bp, addr, val); + } else { + val = REG_RD(bp, MISC_REG_AEU_GENERAL_MASK); + val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK | + MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK); + REG_WR(bp, MISC_REG_AEU_GENERAL_MASK, val); + } +} + +/* Close gates #2, #3 and #4: */ +static void bnx2x_set_234_gates(struct bnx2x *bp, bool close) +{ + u32 val; + + /* Gates #2 and #4a are closed/opened for "not E1" only */ + if (!CHIP_IS_E1(bp)) { + /* #4 */ + REG_WR(bp, PXP_REG_HST_DISCARD_DOORBELLS, !!close); + /* #2 */ + REG_WR(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES, !!close); + } + + /* #3 */ + if (CHIP_IS_E1x(bp)) { + /* Prevent interrupts from HC on both ports */ + val = REG_RD(bp, HC_REG_CONFIG_1); + REG_WR(bp, HC_REG_CONFIG_1, + (!close) ? (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1) : + (val & ~(u32)HC_CONFIG_1_REG_BLOCK_DISABLE_1)); + + val = REG_RD(bp, HC_REG_CONFIG_0); + REG_WR(bp, HC_REG_CONFIG_0, + (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) : + (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0)); + } else { + /* Prevent incoming interrupts in IGU */ + val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); + + REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, + (!close) ? + (val | IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE) : + (val & ~(u32)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE)); + } + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "%s gates #2, #3 and #4\n", + close ? "closing" : "opening"); + mmiowb(); +} + +#define SHARED_MF_CLP_MAGIC 0x80000000 /* `magic' bit */ + +static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val) +{ + /* Do some magic... */ + u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb); + *magic_val = val & SHARED_MF_CLP_MAGIC; + MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC); +} + +/** + * bnx2x_clp_reset_done - restore the value of the `magic' bit. + * + * @bp: driver handle + * @magic_val: old value of the `magic' bit. + */ +static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val) +{ + /* Restore the `magic' bit value... */ + u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb); + MF_CFG_WR(bp, shared_mf_config.clp_mb, + (val & (~SHARED_MF_CLP_MAGIC)) | magic_val); +} + +/** + * bnx2x_reset_mcp_prep - prepare for MCP reset. + * + * @bp: driver handle + * @magic_val: old value of 'magic' bit. + * + * Takes care of CLP configurations. + */ +static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val) +{ + u32 shmem; + u32 validity_offset; + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "Starting\n"); + + /* Set `magic' bit in order to save MF config */ + if (!CHIP_IS_E1(bp)) + bnx2x_clp_reset_prep(bp, magic_val); + + /* Get shmem offset */ + shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + validity_offset = + offsetof(struct shmem_region, validity_map[BP_PORT(bp)]); + + /* Clear validity map flags */ + if (shmem > 0) + REG_WR(bp, shmem + validity_offset, 0); +} + +#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */ +#define MCP_ONE_TIMEOUT 100 /* 100 ms */ + +/** + * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT + * + * @bp: driver handle + */ +static void bnx2x_mcp_wait_one(struct bnx2x *bp) +{ + /* special handling for emulation and FPGA, + wait 10 times longer */ + if (CHIP_REV_IS_SLOW(bp)) + msleep(MCP_ONE_TIMEOUT*10); + else + msleep(MCP_ONE_TIMEOUT); +} + +/* + * initializes bp->common.shmem_base and waits for validity signature to appear + */ +static int bnx2x_init_shmem(struct bnx2x *bp) +{ + int cnt = 0; + u32 val = 0; + + do { + bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + if (bp->common.shmem_base) { + val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); + if (val & SHR_MEM_VALIDITY_MB) + return 0; + } + + bnx2x_mcp_wait_one(bp); + + } while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT)); + + BNX2X_ERR("BAD MCP validity signature\n"); + + return -ENODEV; +} + +static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val) +{ + int rc = bnx2x_init_shmem(bp); + + /* Restore the `magic' bit value */ + if (!CHIP_IS_E1(bp)) + bnx2x_clp_reset_done(bp, magic_val); + + return rc; +} + +static void bnx2x_pxp_prep(struct bnx2x *bp) +{ + if (!CHIP_IS_E1(bp)) { + REG_WR(bp, PXP2_REG_RD_START_INIT, 0); + REG_WR(bp, PXP2_REG_RQ_RBC_DONE, 0); + mmiowb(); + } +} + +/* + * Reset the whole chip except for: + * - PCIE core + * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by + * one reset bit) + * - IGU + * - MISC (including AEU) + * - GRC + * - RBCN, RBCP + */ +static void bnx2x_process_kill_chip_reset(struct bnx2x *bp, bool global) +{ + u32 not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2; + u32 global_bits2, stay_reset2; + + /* + * Bits that have to be set in reset_mask2 if we want to reset 'global' + * (per chip) blocks. + */ + global_bits2 = + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU | + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE; + + /* Don't reset the following blocks. + * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be + * reset, as in 4 port device they might still be owned + * by the MCP (there is only one leader per path). + */ + not_reset_mask1 = + MISC_REGISTERS_RESET_REG_1_RST_HC | + MISC_REGISTERS_RESET_REG_1_RST_PXPV | + MISC_REGISTERS_RESET_REG_1_RST_PXP; + + not_reset_mask2 = + MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO | + MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE | + MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE | + MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE | + MISC_REGISTERS_RESET_REG_2_RST_RBCN | + MISC_REGISTERS_RESET_REG_2_RST_GRC | + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE | + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B | + MISC_REGISTERS_RESET_REG_2_RST_ATC | + MISC_REGISTERS_RESET_REG_2_PGLC | + MISC_REGISTERS_RESET_REG_2_RST_BMAC0 | + MISC_REGISTERS_RESET_REG_2_RST_BMAC1 | + MISC_REGISTERS_RESET_REG_2_RST_EMAC0 | + MISC_REGISTERS_RESET_REG_2_RST_EMAC1 | + MISC_REGISTERS_RESET_REG_2_UMAC0 | + MISC_REGISTERS_RESET_REG_2_UMAC1; + + /* + * Keep the following blocks in reset: + * - all xxMACs are handled by the bnx2x_link code. + */ + stay_reset2 = + MISC_REGISTERS_RESET_REG_2_XMAC | + MISC_REGISTERS_RESET_REG_2_XMAC_SOFT; + + /* Full reset masks according to the chip */ + reset_mask1 = 0xffffffff; + + if (CHIP_IS_E1(bp)) + reset_mask2 = 0xffff; + else if (CHIP_IS_E1H(bp)) + reset_mask2 = 0x1ffff; + else if (CHIP_IS_E2(bp)) + reset_mask2 = 0xfffff; + else /* CHIP_IS_E3 */ + reset_mask2 = 0x3ffffff; + + /* Don't reset global blocks unless we need to */ + if (!global) + reset_mask2 &= ~global_bits2; + + /* + * In case of attention in the QM, we need to reset PXP + * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM + * because otherwise QM reset would release 'close the gates' shortly + * before resetting the PXP, then the PSWRQ would send a write + * request to PGLUE. Then when PXP is reset, PGLUE would try to + * read the payload data from PSWWR, but PSWWR would not + * respond. The write queue in PGLUE would stuck, dmae commands + * would not return. Therefore it's important to reset the second + * reset register (containing the + * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the + * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM + * bit). + */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + reset_mask2 & (~not_reset_mask2)); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + reset_mask1 & (~not_reset_mask1)); + + barrier(); + mmiowb(); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + reset_mask2 & (~stay_reset2)); + + barrier(); + mmiowb(); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1); + mmiowb(); +} + +/** + * bnx2x_er_poll_igu_vq - poll for pending writes bit. + * It should get cleared in no more than 1s. + * + * @bp: driver handle + * + * It should get cleared in no more than 1s. Returns 0 if + * pending writes bit gets cleared. + */ +static int bnx2x_er_poll_igu_vq(struct bnx2x *bp) +{ + u32 cnt = 1000; + u32 pend_bits = 0; + + do { + pend_bits = REG_RD(bp, IGU_REG_PENDING_BITS_STATUS); + + if (pend_bits == 0) + break; + + usleep_range(1000, 2000); + } while (cnt-- > 0); + + if (cnt <= 0) { + BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n", + pend_bits); + return -EBUSY; + } + + return 0; +} + +static int bnx2x_process_kill(struct bnx2x *bp, bool global) +{ + int cnt = 1000; + u32 val = 0; + u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2; + u32 tags_63_32 = 0; + + /* Empty the Tetris buffer, wait for 1s */ + do { + sr_cnt = REG_RD(bp, PXP2_REG_RD_SR_CNT); + blk_cnt = REG_RD(bp, PXP2_REG_RD_BLK_CNT); + port_is_idle_0 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_0); + port_is_idle_1 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_1); + pgl_exp_rom2 = REG_RD(bp, PXP2_REG_PGL_EXP_ROM2); + if (CHIP_IS_E3(bp)) + tags_63_32 = REG_RD(bp, PGLUE_B_REG_TAGS_63_32); + + if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) && + ((port_is_idle_0 & 0x1) == 0x1) && + ((port_is_idle_1 & 0x1) == 0x1) && + (pgl_exp_rom2 == 0xffffffff) && + (!CHIP_IS_E3(bp) || (tags_63_32 == 0xffffffff))) + break; + usleep_range(1000, 2000); + } while (cnt-- > 0); + + if (cnt <= 0) { + BNX2X_ERR("Tetris buffer didn't get empty or there are still outstanding read requests after 1s!\n"); + BNX2X_ERR("sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n", + sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, + pgl_exp_rom2); + return -EAGAIN; + } + + barrier(); + + /* Close gates #2, #3 and #4 */ + bnx2x_set_234_gates(bp, true); + + /* Poll for IGU VQs for 57712 and newer chips */ + if (!CHIP_IS_E1x(bp) && bnx2x_er_poll_igu_vq(bp)) + return -EAGAIN; + + /* TBD: Indicate that "process kill" is in progress to MCP */ + + /* Clear "unprepared" bit */ + REG_WR(bp, MISC_REG_UNPREPARED, 0); + barrier(); + + /* Make sure all is written to the chip before the reset */ + mmiowb(); + + /* Wait for 1ms to empty GLUE and PCI-E core queues, + * PSWHST, GRC and PSWRD Tetris buffer. + */ + usleep_range(1000, 2000); + + /* Prepare to chip reset: */ + /* MCP */ + if (global) + bnx2x_reset_mcp_prep(bp, &val); + + /* PXP */ + bnx2x_pxp_prep(bp); + barrier(); + + /* reset the chip */ + bnx2x_process_kill_chip_reset(bp, global); + barrier(); + + /* clear errors in PGB */ + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PGLUE_B_REG_LATCHED_ERRORS_CLR, 0x7f); + + /* Recover after reset: */ + /* MCP */ + if (global && bnx2x_reset_mcp_comp(bp, val)) + return -EAGAIN; + + /* TBD: Add resetting the NO_MCP mode DB here */ + + /* Open the gates #2, #3 and #4 */ + bnx2x_set_234_gates(bp, false); + + /* TBD: IGU/AEU preparation bring back the AEU/IGU to a + * reset state, re-enable attentions. */ + + return 0; +} + +static int bnx2x_leader_reset(struct bnx2x *bp) +{ + int rc = 0; + bool global = bnx2x_reset_is_global(bp); + u32 load_code; + + /* if not going to reset MCP - load "fake" driver to reset HW while + * driver is owner of the HW + */ + if (!global && !BP_NOMCP(bp)) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, + DRV_MSG_CODE_LOAD_REQ_WITH_LFA); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EAGAIN; + goto exit_leader_reset; + } + if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) && + (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) { + BNX2X_ERR("MCP unexpected resp, aborting\n"); + rc = -EAGAIN; + goto exit_leader_reset2; + } + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EAGAIN; + goto exit_leader_reset2; + } + } + + /* Try to recover after the failure */ + if (bnx2x_process_kill(bp, global)) { + BNX2X_ERR("Something bad had happen on engine %d! Aii!\n", + BP_PATH(bp)); + rc = -EAGAIN; + goto exit_leader_reset2; + } + + /* + * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver + * state. + */ + bnx2x_set_reset_done(bp); + if (global) + bnx2x_clear_reset_global(bp); + +exit_leader_reset2: + /* unload "fake driver" if it was loaded */ + if (!global && !BP_NOMCP(bp)) { + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0); + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); + } +exit_leader_reset: + bp->is_leader = 0; + bnx2x_release_leader_lock(bp); + smp_mb(); + return rc; +} + +static void bnx2x_recovery_failed(struct bnx2x *bp) +{ + netdev_err(bp->dev, "Recovery has failed. Power cycle is needed.\n"); + + /* Disconnect this device */ + netif_device_detach(bp->dev); + + /* + * Block ifup for all function on this engine until "process kill" + * or power cycle. + */ + bnx2x_set_reset_in_progress(bp); + + /* Shut down the power */ + bnx2x_set_power_state(bp, PCI_D3hot); + + bp->recovery_state = BNX2X_RECOVERY_FAILED; + + smp_mb(); +} + +/* + * Assumption: runs under rtnl lock. This together with the fact + * that it's called only from bnx2x_sp_rtnl() ensure that it + * will never be called when netif_running(bp->dev) is false. + */ +static void bnx2x_parity_recover(struct bnx2x *bp) +{ + bool global = false; + u32 error_recovered, error_unrecovered; + bool is_parity; + + DP(NETIF_MSG_HW, "Handling parity\n"); + while (1) { + switch (bp->recovery_state) { + case BNX2X_RECOVERY_INIT: + DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n"); + is_parity = bnx2x_chk_parity_attn(bp, &global, false); + WARN_ON(!is_parity); + + /* Try to get a LEADER_LOCK HW lock */ + if (bnx2x_trylock_leader_lock(bp)) { + bnx2x_set_reset_in_progress(bp); + /* + * Check if there is a global attention and if + * there was a global attention, set the global + * reset bit. + */ + + if (global) + bnx2x_set_reset_global(bp); + + bp->is_leader = 1; + } + + /* Stop the driver */ + /* If interface has been removed - break */ + if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY, false)) + return; + + bp->recovery_state = BNX2X_RECOVERY_WAIT; + + /* Ensure "is_leader", MCP command sequence and + * "recovery_state" update values are seen on other + * CPUs. + */ + smp_mb(); + break; + + case BNX2X_RECOVERY_WAIT: + DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n"); + if (bp->is_leader) { + int other_engine = BP_PATH(bp) ? 0 : 1; + bool other_load_status = + bnx2x_get_load_status(bp, other_engine); + bool load_status = + bnx2x_get_load_status(bp, BP_PATH(bp)); + global = bnx2x_reset_is_global(bp); + + /* + * In case of a parity in a global block, let + * the first leader that performs a + * leader_reset() reset the global blocks in + * order to clear global attentions. Otherwise + * the gates will remain closed for that + * engine. + */ + if (load_status || + (global && other_load_status)) { + /* Wait until all other functions get + * down. + */ + schedule_delayed_work(&bp->sp_rtnl_task, + HZ/10); + return; + } else { + /* If all other functions got down - + * try to bring the chip back to + * normal. In any case it's an exit + * point for a leader. + */ + if (bnx2x_leader_reset(bp)) { + bnx2x_recovery_failed(bp); + return; + } + + /* If we are here, means that the + * leader has succeeded and doesn't + * want to be a leader any more. Try + * to continue as a none-leader. + */ + break; + } + } else { /* non-leader */ + if (!bnx2x_reset_is_done(bp, BP_PATH(bp))) { + /* Try to get a LEADER_LOCK HW lock as + * long as a former leader may have + * been unloaded by the user or + * released a leadership by another + * reason. + */ + if (bnx2x_trylock_leader_lock(bp)) { + /* I'm a leader now! Restart a + * switch case. + */ + bp->is_leader = 1; + break; + } + + schedule_delayed_work(&bp->sp_rtnl_task, + HZ/10); + return; + + } else { + /* + * If there was a global attention, wait + * for it to be cleared. + */ + if (bnx2x_reset_is_global(bp)) { + schedule_delayed_work( + &bp->sp_rtnl_task, + HZ/10); + return; + } + + error_recovered = + bp->eth_stats.recoverable_error; + error_unrecovered = + bp->eth_stats.unrecoverable_error; + bp->recovery_state = + BNX2X_RECOVERY_NIC_LOADING; + if (bnx2x_nic_load(bp, LOAD_NORMAL)) { + error_unrecovered++; + netdev_err(bp->dev, + "Recovery failed. Power cycle needed\n"); + /* Disconnect this device */ + netif_device_detach(bp->dev); + /* Shut down the power */ + bnx2x_set_power_state( + bp, PCI_D3hot); + smp_mb(); + } else { + bp->recovery_state = + BNX2X_RECOVERY_DONE; + error_recovered++; + smp_mb(); + } + bp->eth_stats.recoverable_error = + error_recovered; + bp->eth_stats.unrecoverable_error = + error_unrecovered; + + return; + } + } + default: + return; + } + } +} + +static int bnx2x_close(struct net_device *dev); + +/* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is + * scheduled on a general queue in order to prevent a dead lock. + */ +static void bnx2x_sp_rtnl_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, sp_rtnl_task.work); + + rtnl_lock(); + + if (!netif_running(bp->dev)) { + rtnl_unlock(); + return; + } + + if (unlikely(bp->recovery_state != BNX2X_RECOVERY_DONE)) { +#ifdef BNX2X_STOP_ON_ERROR + BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n" + "you will need to reboot when done\n"); + goto sp_rtnl_not_reset; +#endif + /* + * Clear all pending SP commands as we are going to reset the + * function anyway. + */ + bp->sp_rtnl_state = 0; + smp_mb(); + + bnx2x_parity_recover(bp); + + rtnl_unlock(); + return; + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state)) { +#ifdef BNX2X_STOP_ON_ERROR + BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n" + "you will need to reboot when done\n"); + goto sp_rtnl_not_reset; +#endif + + /* + * Clear all pending SP commands as we are going to reset the + * function anyway. + */ + bp->sp_rtnl_state = 0; + smp_mb(); + + bnx2x_nic_unload(bp, UNLOAD_NORMAL, true); + bnx2x_nic_load(bp, LOAD_NORMAL); + + rtnl_unlock(); + return; + } +#ifdef BNX2X_STOP_ON_ERROR +sp_rtnl_not_reset: +#endif + if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state)) + bnx2x_setup_tc(bp->dev, bp->dcbx_port_params.ets.num_of_cos); + if (test_and_clear_bit(BNX2X_SP_RTNL_AFEX_F_UPDATE, &bp->sp_rtnl_state)) + bnx2x_after_function_update(bp); + /* + * in case of fan failure we need to reset id if the "stop on error" + * debug flag is set, since we trying to prevent permanent overheating + * damage + */ + if (test_and_clear_bit(BNX2X_SP_RTNL_FAN_FAILURE, &bp->sp_rtnl_state)) { + DP(NETIF_MSG_HW, "fan failure detected. Unloading driver\n"); + netif_device_detach(bp->dev); + bnx2x_close(bp->dev); + rtnl_unlock(); + return; + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_MCAST, &bp->sp_rtnl_state)) { + DP(BNX2X_MSG_SP, + "sending set mcast vf pf channel message from rtnl sp-task\n"); + bnx2x_vfpf_set_mcast(bp->dev); + } + if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN, + &bp->sp_rtnl_state)){ + if (!test_bit(__LINK_STATE_NOCARRIER, &bp->dev->state)) { + bnx2x_tx_disable(bp); + BNX2X_ERR("PF indicated channel is not servicable anymore. This means this VF device is no longer operational\n"); + } + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_RX_MODE, &bp->sp_rtnl_state)) { + DP(BNX2X_MSG_SP, "Handling Rx Mode setting\n"); + bnx2x_set_rx_mode_inner(bp); + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_HYPERVISOR_VLAN, + &bp->sp_rtnl_state)) + bnx2x_pf_set_vfs_vlan(bp); + + if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state)) { + bnx2x_dcbx_stop_hw_tx(bp); + bnx2x_dcbx_resume_hw_tx(bp); + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_GET_DRV_VERSION, + &bp->sp_rtnl_state)) + bnx2x_update_mng_version(bp); + + /* work which needs rtnl lock not-taken (as it takes the lock itself and + * can be called from other contexts as well) + */ + rtnl_unlock(); + + /* enable SR-IOV if applicable */ + if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, + &bp->sp_rtnl_state)) { + bnx2x_disable_sriov(bp); + bnx2x_enable_sriov(bp); + } +} + +static void bnx2x_period_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, period_task.work); + + if (!netif_running(bp->dev)) + goto period_task_exit; + + if (CHIP_REV_IS_SLOW(bp)) { + BNX2X_ERR("period task called on emulation, ignoring\n"); + goto period_task_exit; + } + + bnx2x_acquire_phy_lock(bp); + /* + * The barrier is needed to ensure the ordering between the writing to + * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and + * the reading here. + */ + smp_mb(); + if (bp->port.pmf) { + bnx2x_period_func(&bp->link_params, &bp->link_vars); + + /* Re-queue task in 1 sec */ + queue_delayed_work(bnx2x_wq, &bp->period_task, 1*HZ); + } + + bnx2x_release_phy_lock(bp); +period_task_exit: + return; +} + +/* + * Init service functions + */ + +static u32 bnx2x_get_pretend_reg(struct bnx2x *bp) +{ + u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0; + u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base; + return base + (BP_ABS_FUNC(bp)) * stride; +} + +static bool bnx2x_prev_unload_close_umac(struct bnx2x *bp, + u8 port, u32 reset_reg, + struct bnx2x_mac_vals *vals) +{ + u32 mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port; + u32 base_addr; + + if (!(mask & reset_reg)) + return false; + + BNX2X_DEV_INFO("Disable umac Rx %02x\n", port); + base_addr = port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + vals->umac_addr[port] = base_addr + UMAC_REG_COMMAND_CONFIG; + vals->umac_val[port] = REG_RD(bp, vals->umac_addr[port]); + REG_WR(bp, vals->umac_addr[port], 0); + + return true; +} + +static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, + struct bnx2x_mac_vals *vals) +{ + u32 val, base_addr, offset, mask, reset_reg; + bool mac_stopped = false; + u8 port = BP_PORT(bp); + + /* reset addresses as they also mark which values were changed */ + memset(vals, 0, sizeof(*vals)); + + reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2); + + if (!CHIP_IS_E3(bp)) { + val = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port * 4); + mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port; + if ((mask & reset_reg) && val) { + u32 wb_data[2]; + BNX2X_DEV_INFO("Disable bmac Rx\n"); + base_addr = BP_PORT(bp) ? NIG_REG_INGRESS_BMAC1_MEM + : NIG_REG_INGRESS_BMAC0_MEM; + offset = CHIP_IS_E2(bp) ? BIGMAC2_REGISTER_BMAC_CONTROL + : BIGMAC_REGISTER_BMAC_CONTROL; + + /* + * use rd/wr since we cannot use dmae. This is safe + * since MCP won't access the bus due to the request + * to unload, and no function on the path can be + * loaded at this time. + */ + wb_data[0] = REG_RD(bp, base_addr + offset); + wb_data[1] = REG_RD(bp, base_addr + offset + 0x4); + vals->bmac_addr = base_addr + offset; + vals->bmac_val[0] = wb_data[0]; + vals->bmac_val[1] = wb_data[1]; + wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; + REG_WR(bp, vals->bmac_addr, wb_data[0]); + REG_WR(bp, vals->bmac_addr + 0x4, wb_data[1]); + } + BNX2X_DEV_INFO("Disable emac Rx\n"); + vals->emac_addr = NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4; + vals->emac_val = REG_RD(bp, vals->emac_addr); + REG_WR(bp, vals->emac_addr, 0); + mac_stopped = true; + } else { + if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) { + BNX2X_DEV_INFO("Disable xmac Rx\n"); + base_addr = BP_PORT(bp) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + val = REG_RD(bp, base_addr + XMAC_REG_PFC_CTRL_HI); + REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, + val & ~(1 << 1)); + REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, + val | (1 << 1)); + vals->xmac_addr = base_addr + XMAC_REG_CTRL; + vals->xmac_val = REG_RD(bp, vals->xmac_addr); + REG_WR(bp, vals->xmac_addr, 0); + mac_stopped = true; + } + + mac_stopped |= bnx2x_prev_unload_close_umac(bp, 0, + reset_reg, vals); + mac_stopped |= bnx2x_prev_unload_close_umac(bp, 1, + reset_reg, vals); + } + + if (mac_stopped) + msleep(20); +} + +#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4)) +#define BNX2X_PREV_UNDI_PROD_ADDR_H(f) (BAR_TSTRORM_INTMEM + \ + 0x1848 + ((f) << 4)) +#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff) +#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff) +#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq)) + +#define BCM_5710_UNDI_FW_MF_MAJOR (0x07) +#define BCM_5710_UNDI_FW_MF_MINOR (0x08) +#define BCM_5710_UNDI_FW_MF_VERS (0x05) + +static bool bnx2x_prev_is_after_undi(struct bnx2x *bp) +{ + /* UNDI marks its presence in DORQ - + * it initializes CID offset for normal bell to 0x7 + */ + if (!(REG_RD(bp, MISC_REG_RESET_REG_1) & + MISC_REGISTERS_RESET_REG_1_RST_DORQ)) + return false; + + if (REG_RD(bp, DORQ_REG_NORM_CID_OFST) == 0x7) { + BNX2X_DEV_INFO("UNDI previously loaded\n"); + return true; + } + + return false; +} + +static void bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 inc) +{ + u16 rcq, bd; + u32 addr, tmp_reg; + + if (BP_FUNC(bp) < 2) + addr = BNX2X_PREV_UNDI_PROD_ADDR(BP_PORT(bp)); + else + addr = BNX2X_PREV_UNDI_PROD_ADDR_H(BP_FUNC(bp) - 2); + + tmp_reg = REG_RD(bp, addr); + rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc; + bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc; + + tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd); + REG_WR(bp, addr, tmp_reg); + + BNX2X_DEV_INFO("UNDI producer [%d/%d][%08x] rings bd -> 0x%04x, rcq -> 0x%04x\n", + BP_PORT(bp), BP_FUNC(bp), addr, bd, rcq); +} + +static int bnx2x_prev_mcp_done(struct bnx2x *bp) +{ + u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, + DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET); + if (!rc) { + BNX2X_ERR("MCP response failure, aborting\n"); + return -EBUSY; + } + + return 0; +} + +static struct bnx2x_prev_path_list * + bnx2x_prev_path_get_entry(struct bnx2x *bp) +{ + struct bnx2x_prev_path_list *tmp_list; + + list_for_each_entry(tmp_list, &bnx2x_prev_list, list) + if (PCI_SLOT(bp->pdev->devfn) == tmp_list->slot && + bp->pdev->bus->number == tmp_list->bus && + BP_PATH(bp) == tmp_list->path) + return tmp_list; + + return NULL; +} + +static int bnx2x_prev_path_mark_eeh(struct bnx2x *bp) +{ + struct bnx2x_prev_path_list *tmp_list; + int rc; + + rc = down_interruptible(&bnx2x_prev_sem); + if (rc) { + BNX2X_ERR("Received %d when tried to take lock\n", rc); + return rc; + } + + tmp_list = bnx2x_prev_path_get_entry(bp); + if (tmp_list) { + tmp_list->aer = 1; + rc = 0; + } else { + BNX2X_ERR("path %d: Entry does not exist for eeh; Flow occurs before initial insmod is over ?\n", + BP_PATH(bp)); + } + + up(&bnx2x_prev_sem); + + return rc; +} + +static bool bnx2x_prev_is_path_marked(struct bnx2x *bp) +{ + struct bnx2x_prev_path_list *tmp_list; + bool rc = false; + + if (down_trylock(&bnx2x_prev_sem)) + return false; + + tmp_list = bnx2x_prev_path_get_entry(bp); + if (tmp_list) { + if (tmp_list->aer) { + DP(NETIF_MSG_HW, "Path %d was marked by AER\n", + BP_PATH(bp)); + } else { + rc = true; + BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n", + BP_PATH(bp)); + } + } + + up(&bnx2x_prev_sem); + + return rc; +} + +bool bnx2x_port_after_undi(struct bnx2x *bp) +{ + struct bnx2x_prev_path_list *entry; + bool val; + + down(&bnx2x_prev_sem); + + entry = bnx2x_prev_path_get_entry(bp); + val = !!(entry && (entry->undi & (1 << BP_PORT(bp)))); + + up(&bnx2x_prev_sem); + + return val; +} + +static int bnx2x_prev_mark_path(struct bnx2x *bp, bool after_undi) +{ + struct bnx2x_prev_path_list *tmp_list; + int rc; + + rc = down_interruptible(&bnx2x_prev_sem); + if (rc) { + BNX2X_ERR("Received %d when tried to take lock\n", rc); + return rc; + } + + /* Check whether the entry for this path already exists */ + tmp_list = bnx2x_prev_path_get_entry(bp); + if (tmp_list) { + if (!tmp_list->aer) { + BNX2X_ERR("Re-Marking the path.\n"); + } else { + DP(NETIF_MSG_HW, "Removing AER indication from path %d\n", + BP_PATH(bp)); + tmp_list->aer = 0; + } + up(&bnx2x_prev_sem); + return 0; + } + up(&bnx2x_prev_sem); + + /* Create an entry for this path and add it */ + tmp_list = kmalloc(sizeof(struct bnx2x_prev_path_list), GFP_KERNEL); + if (!tmp_list) { + BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n"); + return -ENOMEM; + } + + tmp_list->bus = bp->pdev->bus->number; + tmp_list->slot = PCI_SLOT(bp->pdev->devfn); + tmp_list->path = BP_PATH(bp); + tmp_list->aer = 0; + tmp_list->undi = after_undi ? (1 << BP_PORT(bp)) : 0; + + rc = down_interruptible(&bnx2x_prev_sem); + if (rc) { + BNX2X_ERR("Received %d when tried to take lock\n", rc); + kfree(tmp_list); + } else { + DP(NETIF_MSG_HW, "Marked path [%d] - finished previous unload\n", + BP_PATH(bp)); + list_add(&tmp_list->list, &bnx2x_prev_list); + up(&bnx2x_prev_sem); + } + + return rc; +} + +static int bnx2x_do_flr(struct bnx2x *bp) +{ + struct pci_dev *dev = bp->pdev; + + if (CHIP_IS_E1x(bp)) { + BNX2X_DEV_INFO("FLR not supported in E1/E1H\n"); + return -EINVAL; + } + + /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */ + if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) { + BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n", + bp->common.bc_ver); + return -EINVAL; + } + + if (!pci_wait_for_pending_transaction(dev)) + dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); + + BNX2X_DEV_INFO("Initiating FLR\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0); + + return 0; +} + +static int bnx2x_prev_unload_uncommon(struct bnx2x *bp) +{ + int rc; + + BNX2X_DEV_INFO("Uncommon unload Flow\n"); + + /* Test if previous unload process was already finished for this path */ + if (bnx2x_prev_is_path_marked(bp)) + return bnx2x_prev_mcp_done(bp); + + BNX2X_DEV_INFO("Path is unmarked\n"); + + /* Cannot proceed with FLR if UNDI is loaded, since FW does not match */ + if (bnx2x_prev_is_after_undi(bp)) + goto out; + + /* If function has FLR capabilities, and existing FW version matches + * the one required, then FLR will be sufficient to clean any residue + * left by previous driver + */ + rc = bnx2x_compare_fw_ver(bp, FW_MSG_CODE_DRV_LOAD_FUNCTION, false); + + if (!rc) { + /* fw version is good */ + BNX2X_DEV_INFO("FW version matches our own. Attempting FLR\n"); + rc = bnx2x_do_flr(bp); + } + + if (!rc) { + /* FLR was performed */ + BNX2X_DEV_INFO("FLR successful\n"); + return 0; + } + + BNX2X_DEV_INFO("Could not FLR\n"); + +out: + /* Close the MCP request, return failure*/ + rc = bnx2x_prev_mcp_done(bp); + if (!rc) + rc = BNX2X_PREV_WAIT_NEEDED; + + return rc; +} + +static int bnx2x_prev_unload_common(struct bnx2x *bp) +{ + u32 reset_reg, tmp_reg = 0, rc; + bool prev_undi = false; + struct bnx2x_mac_vals mac_vals; + + /* It is possible a previous function received 'common' answer, + * but hasn't loaded yet, therefore creating a scenario of + * multiple functions receiving 'common' on the same path. + */ + BNX2X_DEV_INFO("Common unload Flow\n"); + + memset(&mac_vals, 0, sizeof(mac_vals)); + + if (bnx2x_prev_is_path_marked(bp)) + return bnx2x_prev_mcp_done(bp); + + reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1); + + /* Reset should be performed after BRB is emptied */ + if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) { + u32 timer_count = 1000; + + /* Close the MAC Rx to prevent BRB from filling up */ + bnx2x_prev_unload_close_mac(bp, &mac_vals); + + /* close LLH filters for both ports towards the BRB */ + bnx2x_set_rx_filter(&bp->link_params, 0); + bp->link_params.port ^= 1; + bnx2x_set_rx_filter(&bp->link_params, 0); + bp->link_params.port ^= 1; + + /* Check if the UNDI driver was previously loaded */ + if (bnx2x_prev_is_after_undi(bp)) { + prev_undi = true; + /* clear the UNDI indication */ + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + /* clear possible idle check errors */ + REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0); + } + if (!CHIP_IS_E1x(bp)) + /* block FW from writing to host */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); + + /* wait until BRB is empty */ + tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS); + while (timer_count) { + u32 prev_brb = tmp_reg; + + tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS); + if (!tmp_reg) + break; + + BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg); + + /* reset timer as long as BRB actually gets emptied */ + if (prev_brb > tmp_reg) + timer_count = 1000; + else + timer_count--; + + /* If UNDI resides in memory, manually increment it */ + if (prev_undi) + bnx2x_prev_unload_undi_inc(bp, 1); + + udelay(10); + } + + if (!timer_count) + BNX2X_ERR("Failed to empty BRB, hope for the best\n"); + } + + /* No packets are in the pipeline, path is ready for reset */ + bnx2x_reset_common(bp); + + if (mac_vals.xmac_addr) + REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val); + if (mac_vals.umac_addr[0]) + REG_WR(bp, mac_vals.umac_addr[0], mac_vals.umac_val[0]); + if (mac_vals.umac_addr[1]) + REG_WR(bp, mac_vals.umac_addr[1], mac_vals.umac_val[1]); + if (mac_vals.emac_addr) + REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val); + if (mac_vals.bmac_addr) { + REG_WR(bp, mac_vals.bmac_addr, mac_vals.bmac_val[0]); + REG_WR(bp, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]); + } + + rc = bnx2x_prev_mark_path(bp, prev_undi); + if (rc) { + bnx2x_prev_mcp_done(bp); + return rc; + } + + return bnx2x_prev_mcp_done(bp); +} + +static int bnx2x_prev_unload(struct bnx2x *bp) +{ + int time_counter = 10; + u32 rc, fw, hw_lock_reg, hw_lock_val; + BNX2X_DEV_INFO("Entering Previous Unload Flow\n"); + + /* clear hw from errors which may have resulted from an interrupted + * dmae transaction. + */ + bnx2x_clean_pglue_errors(bp); + + /* Release previously held locks */ + hw_lock_reg = (BP_FUNC(bp) <= 5) ? + (MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) : + (MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8); + + hw_lock_val = REG_RD(bp, hw_lock_reg); + if (hw_lock_val) { + if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) { + BNX2X_DEV_INFO("Release Previously held NVRAM lock\n"); + REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB, + (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << BP_PORT(bp))); + } + + BNX2X_DEV_INFO("Release Previously held hw lock\n"); + REG_WR(bp, hw_lock_reg, 0xffffffff); + } else + BNX2X_DEV_INFO("No need to release hw/nvram locks\n"); + + if (MCPR_ACCESS_LOCK_LOCK & REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK)) { + BNX2X_DEV_INFO("Release previously held alr\n"); + bnx2x_release_alr(bp); + } + + do { + int aer = 0; + /* Lock MCP using an unload request */ + fw = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0); + if (!fw) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EBUSY; + break; + } + + rc = down_interruptible(&bnx2x_prev_sem); + if (rc) { + BNX2X_ERR("Cannot check for AER; Received %d when tried to take lock\n", + rc); + } else { + /* If Path is marked by EEH, ignore unload status */ + aer = !!(bnx2x_prev_path_get_entry(bp) && + bnx2x_prev_path_get_entry(bp)->aer); + up(&bnx2x_prev_sem); + } + + if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON || aer) { + rc = bnx2x_prev_unload_common(bp); + break; + } + + /* non-common reply from MCP might require looping */ + rc = bnx2x_prev_unload_uncommon(bp); + if (rc != BNX2X_PREV_WAIT_NEEDED) + break; + + msleep(20); + } while (--time_counter); + + if (!time_counter || rc) { + BNX2X_DEV_INFO("Unloading previous driver did not occur, Possibly due to MF UNDI\n"); + rc = -EPROBE_DEFER; + } + + /* Mark function if its port was used to boot from SAN */ + if (bnx2x_port_after_undi(bp)) + bp->link_params.feature_config_flags |= + FEATURE_CONFIG_BOOT_FROM_SAN; + + BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc); + + return rc; +} + +static void bnx2x_get_common_hwinfo(struct bnx2x *bp) +{ + u32 val, val2, val3, val4, id, boot_mode; + u16 pmc; + + /* Get the chip revision id and number. */ + /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ + val = REG_RD(bp, MISC_REG_CHIP_NUM); + id = ((val & 0xffff) << 16); + val = REG_RD(bp, MISC_REG_CHIP_REV); + id |= ((val & 0xf) << 12); + + /* Metal is read from PCI regs, but we can't access >=0x400 from + * the configuration space (so we need to reg_rd) + */ + val = REG_RD(bp, PCICFG_OFFSET + PCI_ID_VAL3); + id |= (((val >> 24) & 0xf) << 4); + val = REG_RD(bp, MISC_REG_BOND_ID); + id |= (val & 0xf); + bp->common.chip_id = id; + + /* force 57811 according to MISC register */ + if (REG_RD(bp, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) { + if (CHIP_IS_57810(bp)) + bp->common.chip_id = (CHIP_NUM_57811 << 16) | + (bp->common.chip_id & 0x0000FFFF); + else if (CHIP_IS_57810_MF(bp)) + bp->common.chip_id = (CHIP_NUM_57811_MF << 16) | + (bp->common.chip_id & 0x0000FFFF); + bp->common.chip_id |= 0x1; + } + + /* Set doorbell size */ + bp->db_size = (1 << BNX2X_DB_SHIFT); + + if (!CHIP_IS_E1x(bp)) { + val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR); + if ((val & 1) == 0) + val = REG_RD(bp, MISC_REG_PORT4MODE_EN); + else + val = (val >> 1) & 1; + BNX2X_DEV_INFO("chip is in %s\n", val ? "4_PORT_MODE" : + "2_PORT_MODE"); + bp->common.chip_port_mode = val ? CHIP_4_PORT_MODE : + CHIP_2_PORT_MODE; + + if (CHIP_MODE_IS_4_PORT(bp)) + bp->pfid = (bp->pf_num >> 1); /* 0..3 */ + else + bp->pfid = (bp->pf_num & 0x6); /* 0, 2, 4, 6 */ + } else { + bp->common.chip_port_mode = CHIP_PORT_MODE_NONE; /* N/A */ + bp->pfid = bp->pf_num; /* 0..7 */ + } + + BNX2X_DEV_INFO("pf_id: %x", bp->pfid); + + bp->link_params.chip_id = bp->common.chip_id; + BNX2X_DEV_INFO("chip ID is 0x%x\n", id); + + val = (REG_RD(bp, 0x2874) & 0x55); + if ((bp->common.chip_id & 0x1) || + (CHIP_IS_E1(bp) && val) || (CHIP_IS_E1H(bp) && (val == 0x55))) { + bp->flags |= ONE_PORT_FLAG; + BNX2X_DEV_INFO("single port device\n"); + } + + val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4); + bp->common.flash_size = (BNX2X_NVRAM_1MB_SIZE << + (val & MCPR_NVM_CFG4_FLASH_SIZE)); + BNX2X_DEV_INFO("flash_size 0x%x (%d)\n", + bp->common.flash_size, bp->common.flash_size); + + bnx2x_init_shmem(bp); + + bp->common.shmem2_base = REG_RD(bp, (BP_PATH(bp) ? + MISC_REG_GENERIC_CR_1 : + MISC_REG_GENERIC_CR_0)); + + bp->link_params.shmem_base = bp->common.shmem_base; + bp->link_params.shmem2_base = bp->common.shmem2_base; + if (SHMEM2_RD(bp, size) > + (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)])) + bp->link_params.lfa_base = + REG_RD(bp, bp->common.shmem2_base + + (u32)offsetof(struct shmem2_region, + lfa_host_addr[BP_PORT(bp)])); + else + bp->link_params.lfa_base = 0; + BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n", + bp->common.shmem_base, bp->common.shmem2_base); + + if (!bp->common.shmem_base) { + BNX2X_DEV_INFO("MCP not active\n"); + bp->flags |= NO_MCP_FLAG; + return; + } + + bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config); + BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config); + + bp->link_params.hw_led_mode = ((bp->common.hw_config & + SHARED_HW_CFG_LED_MODE_MASK) >> + SHARED_HW_CFG_LED_MODE_SHIFT); + + bp->link_params.feature_config_flags = 0; + val = SHMEM_RD(bp, dev_info.shared_feature_config.config); + if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) + bp->link_params.feature_config_flags |= + FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED; + else + bp->link_params.feature_config_flags &= + ~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED; + + val = SHMEM_RD(bp, dev_info.bc_rev) >> 8; + bp->common.bc_ver = val; + BNX2X_DEV_INFO("bc_ver %X\n", val); + if (val < BNX2X_BC_VER) { + /* for now only warn + * later we might need to enforce this */ + BNX2X_ERR("This driver needs bc_ver %X but found %X, please upgrade BC\n", + BNX2X_BC_VER, val); + } + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ? + FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0; + + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ? + FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0; + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_VRFY_AFEX_SUPPORTED) ? + FEATURE_CONFIG_BC_SUPPORTS_AFEX : 0; + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ? + FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0; + + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_MT_SUPPORTED) ? + FEATURE_CONFIG_MT_SUPPORT : 0; + + bp->flags |= (val >= REQ_BC_VER_4_PFC_STATS_SUPPORTED) ? + BC_SUPPORTS_PFC_STATS : 0; + + bp->flags |= (val >= REQ_BC_VER_4_FCOE_FEATURES) ? + BC_SUPPORTS_FCOE_FEATURES : 0; + + bp->flags |= (val >= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF) ? + BC_SUPPORTS_DCBX_MSG_NON_PMF : 0; + + bp->flags |= (val >= REQ_BC_VER_4_RMMOD_CMD) ? + BC_SUPPORTS_RMMOD_CMD : 0; + + boot_mode = SHMEM_RD(bp, + dev_info.port_feature_config[BP_PORT(bp)].mba_config) & + PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK; + switch (boot_mode) { + case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE: + bp->common.boot_mode = FEATURE_ETH_BOOTMODE_PXE; + break; + case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_ISCSIB: + bp->common.boot_mode = FEATURE_ETH_BOOTMODE_ISCSI; + break; + case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_FCOE_BOOT: + bp->common.boot_mode = FEATURE_ETH_BOOTMODE_FCOE; + break; + case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_NONE: + bp->common.boot_mode = FEATURE_ETH_BOOTMODE_NONE; + break; + } + + pci_read_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_PMC, &pmc); + bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG; + + BNX2X_DEV_INFO("%sWoL capable\n", + (bp->flags & NO_WOL_FLAG) ? "not " : ""); + + val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num); + val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]); + val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]); + val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]); + + dev_info(&bp->pdev->dev, "part number %X-%X-%X-%X\n", + val, val2, val3, val4); +} + +#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID) +#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR) + +static int bnx2x_get_igu_cam_info(struct bnx2x *bp) +{ + int pfid = BP_FUNC(bp); + int igu_sb_id; + u32 val; + u8 fid, igu_sb_cnt = 0; + + bp->igu_base_sb = 0xff; + if (CHIP_INT_MODE_IS_BC(bp)) { + int vn = BP_VN(bp); + igu_sb_cnt = bp->igu_sb_cnt; + bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) * + FP_SB_MAX_E1x; + + bp->igu_dsb_id = E1HVN_MAX * FP_SB_MAX_E1x + + (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn); + + return 0; + } + + /* IGU in normal mode - read CAM */ + for (igu_sb_id = 0; igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; + igu_sb_id++) { + val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4); + if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) + continue; + fid = IGU_FID(val); + if ((fid & IGU_FID_ENCODE_IS_PF)) { + if ((fid & IGU_FID_PF_NUM_MASK) != pfid) + continue; + if (IGU_VEC(val) == 0) + /* default status block */ + bp->igu_dsb_id = igu_sb_id; + else { + if (bp->igu_base_sb == 0xff) + bp->igu_base_sb = igu_sb_id; + igu_sb_cnt++; + } + } + } + +#ifdef CONFIG_PCI_MSI + /* Due to new PF resource allocation by MFW T7.4 and above, it's + * optional that number of CAM entries will not be equal to the value + * advertised in PCI. + * Driver should use the minimal value of both as the actual status + * block count + */ + bp->igu_sb_cnt = min_t(int, bp->igu_sb_cnt, igu_sb_cnt); +#endif + + if (igu_sb_cnt == 0) { + BNX2X_ERR("CAM configuration error\n"); + return -EINVAL; + } + + return 0; +} + +static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) +{ + int cfg_size = 0, idx, port = BP_PORT(bp); + + /* Aggregation of supported attributes of all external phys */ + bp->port.supported[0] = 0; + bp->port.supported[1] = 0; + switch (bp->link_params.num_phys) { + case 1: + bp->port.supported[0] = bp->link_params.phy[INT_PHY].supported; + cfg_size = 1; + break; + case 2: + bp->port.supported[0] = bp->link_params.phy[EXT_PHY1].supported; + cfg_size = 1; + break; + case 3: + if (bp->link_params.multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED) { + bp->port.supported[1] = + bp->link_params.phy[EXT_PHY1].supported; + bp->port.supported[0] = + bp->link_params.phy[EXT_PHY2].supported; + } else { + bp->port.supported[0] = + bp->link_params.phy[EXT_PHY1].supported; + bp->port.supported[1] = + bp->link_params.phy[EXT_PHY2].supported; + } + cfg_size = 2; + break; + } + + if (!(bp->port.supported[0] || bp->port.supported[1])) { + BNX2X_ERR("NVRAM config error. BAD phy config. PHY1 config 0x%x, PHY2 config 0x%x\n", + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config), + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config2)); + return; + } + + if (CHIP_IS_E3(bp)) + bp->port.phy_addr = REG_RD(bp, MISC_REG_WC0_CTRL_PHY_ADDR); + else { + switch (switch_cfg) { + case SWITCH_CFG_1G: + bp->port.phy_addr = REG_RD( + bp, NIG_REG_SERDES0_CTRL_PHY_ADDR + port*0x10); + break; + case SWITCH_CFG_10G: + bp->port.phy_addr = REG_RD( + bp, NIG_REG_XGXS0_CTRL_PHY_ADDR + port*0x18); + break; + default: + BNX2X_ERR("BAD switch_cfg link_config 0x%x\n", + bp->port.link_config[0]); + return; + } + } + BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr); + /* mask what we support according to speed_cap_mask per configuration */ + for (idx = 0; idx < cfg_size; idx++) { + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) + bp->port.supported[idx] &= ~SUPPORTED_10baseT_Half; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) + bp->port.supported[idx] &= ~SUPPORTED_10baseT_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) + bp->port.supported[idx] &= ~SUPPORTED_100baseT_Half; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) + bp->port.supported[idx] &= ~SUPPORTED_100baseT_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) + bp->port.supported[idx] &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) + bp->port.supported[idx] &= ~SUPPORTED_2500baseX_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) + bp->port.supported[idx] &= ~SUPPORTED_10000baseT_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) + bp->port.supported[idx] &= ~SUPPORTED_20000baseKR2_Full; + } + + BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp->port.supported[0], + bp->port.supported[1]); +} + +static void bnx2x_link_settings_requested(struct bnx2x *bp) +{ + u32 link_config, idx, cfg_size = 0; + bp->port.advertising[0] = 0; + bp->port.advertising[1] = 0; + switch (bp->link_params.num_phys) { + case 1: + case 2: + cfg_size = 1; + break; + case 3: + cfg_size = 2; + break; + } + for (idx = 0; idx < cfg_size; idx++) { + bp->link_params.req_duplex[idx] = DUPLEX_FULL; + link_config = bp->port.link_config[idx]; + switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) { + case PORT_FEATURE_LINK_SPEED_AUTO: + if (bp->port.supported[idx] & SUPPORTED_Autoneg) { + bp->link_params.req_line_speed[idx] = + SPEED_AUTO_NEG; + bp->port.advertising[idx] |= + bp->port.supported[idx]; + if (bp->link_params.phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) + bp->port.advertising[idx] |= + (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full); + } else { + /* force 10G, no AN */ + bp->link_params.req_line_speed[idx] = + SPEED_10000; + bp->port.advertising[idx] |= + (ADVERTISED_10000baseT_Full | + ADVERTISED_FIBRE); + continue; + } + break; + + case PORT_FEATURE_LINK_SPEED_10M_FULL: + if (bp->port.supported[idx] & SUPPORTED_10baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_10; + bp->port.advertising[idx] |= + (ADVERTISED_10baseT_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_10M_HALF: + if (bp->port.supported[idx] & SUPPORTED_10baseT_Half) { + bp->link_params.req_line_speed[idx] = + SPEED_10; + bp->link_params.req_duplex[idx] = + DUPLEX_HALF; + bp->port.advertising[idx] |= + (ADVERTISED_10baseT_Half | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_100M_FULL: + if (bp->port.supported[idx] & + SUPPORTED_100baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_100; + bp->port.advertising[idx] |= + (ADVERTISED_100baseT_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_100M_HALF: + if (bp->port.supported[idx] & + SUPPORTED_100baseT_Half) { + bp->link_params.req_line_speed[idx] = + SPEED_100; + bp->link_params.req_duplex[idx] = + DUPLEX_HALF; + bp->port.advertising[idx] |= + (ADVERTISED_100baseT_Half | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_1G: + if (bp->port.supported[idx] & + SUPPORTED_1000baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_1000; + bp->port.advertising[idx] |= + (ADVERTISED_1000baseT_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_2_5G: + if (bp->port.supported[idx] & + SUPPORTED_2500baseX_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_2500; + bp->port.advertising[idx] |= + (ADVERTISED_2500baseX_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_10G_CX4: + if (bp->port.supported[idx] & + SUPPORTED_10000baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_10000; + bp->port.advertising[idx] |= + (ADVERTISED_10000baseT_Full | + ADVERTISED_FIBRE); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + case PORT_FEATURE_LINK_SPEED_20G: + bp->link_params.req_line_speed[idx] = SPEED_20000; + + break; + default: + BNX2X_ERR("NVRAM config error. BAD link speed link_config 0x%x\n", + link_config); + bp->link_params.req_line_speed[idx] = + SPEED_AUTO_NEG; + bp->port.advertising[idx] = + bp->port.supported[idx]; + break; + } + + bp->link_params.req_flow_ctrl[idx] = (link_config & + PORT_FEATURE_FLOW_CONTROL_MASK); + if (bp->link_params.req_flow_ctrl[idx] == + BNX2X_FLOW_CTRL_AUTO) { + if (!(bp->port.supported[idx] & SUPPORTED_Autoneg)) + bp->link_params.req_flow_ctrl[idx] = + BNX2X_FLOW_CTRL_NONE; + else + bnx2x_set_requested_fc(bp); + } + + BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x advertising 0x%x\n", + bp->link_params.req_line_speed[idx], + bp->link_params.req_duplex[idx], + bp->link_params.req_flow_ctrl[idx], + bp->port.advertising[idx]); + } +} + +static void bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi) +{ + __be16 mac_hi_be = cpu_to_be16(mac_hi); + __be32 mac_lo_be = cpu_to_be32(mac_lo); + memcpy(mac_buf, &mac_hi_be, sizeof(mac_hi_be)); + memcpy(mac_buf + sizeof(mac_hi_be), &mac_lo_be, sizeof(mac_lo_be)); +} + +static void bnx2x_get_port_hwinfo(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 config; + u32 ext_phy_type, ext_phy_config, eee_mode; + + bp->link_params.bp = bp; + bp->link_params.port = port; + + bp->link_params.lane_config = + SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config); + + bp->link_params.speed_cap_mask[0] = + SHMEM_RD(bp, + dev_info.port_hw_config[port].speed_capability_mask) & + PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK; + bp->link_params.speed_cap_mask[1] = + SHMEM_RD(bp, + dev_info.port_hw_config[port].speed_capability_mask2) & + PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK; + bp->port.link_config[0] = + SHMEM_RD(bp, dev_info.port_feature_config[port].link_config); + + bp->port.link_config[1] = + SHMEM_RD(bp, dev_info.port_feature_config[port].link_config2); + + bp->link_params.multi_phy_config = + SHMEM_RD(bp, dev_info.port_hw_config[port].multi_phy_config); + /* If the device is capable of WoL, set the default state according + * to the HW + */ + config = SHMEM_RD(bp, dev_info.port_feature_config[port].config); + bp->wol = (!(bp->flags & NO_WOL_FLAG) && + (config & PORT_FEATURE_WOL_ENABLED)); + + if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) == + PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE && !IS_MF(bp)) + bp->flags |= NO_ISCSI_FLAG; + if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) == + PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI && !(IS_MF(bp))) + bp->flags |= NO_FCOE_FLAG; + + BNX2X_DEV_INFO("lane_config 0x%08x speed_cap_mask0 0x%08x link_config0 0x%08x\n", + bp->link_params.lane_config, + bp->link_params.speed_cap_mask[0], + bp->port.link_config[0]); + + bp->link_params.switch_cfg = (bp->port.link_config[0] & + PORT_FEATURE_CONNECTED_SWITCH_MASK); + bnx2x_phy_probe(&bp->link_params); + bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg); + + bnx2x_link_settings_requested(bp); + + /* + * If connected directly, work with the internal PHY, otherwise, work + * with the external PHY + */ + ext_phy_config = + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config); + ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); + if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + bp->mdio.prtad = bp->port.phy_addr; + + else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) + bp->mdio.prtad = + XGXS_EXT_PHY_ADDR(ext_phy_config); + + /* Configure link feature according to nvram value */ + eee_mode = (((SHMEM_RD(bp, dev_info. + port_feature_config[port].eee_power_mode)) & + PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >> + PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT); + if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) { + bp->link_params.eee_mode = EEE_MODE_ADV_LPI | + EEE_MODE_ENABLE_LPI | + EEE_MODE_OUTPUT_TIME; + } else { + bp->link_params.eee_mode = 0; + } +} + +void bnx2x_get_iscsi_info(struct bnx2x *bp) +{ + u32 no_flags = NO_ISCSI_FLAG; + int port = BP_PORT(bp); + u32 max_iscsi_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp, + drv_lic_key[port].max_iscsi_conn); + + if (!CNIC_SUPPORT(bp)) { + bp->flags |= no_flags; + return; + } + + /* Get the number of maximum allowed iSCSI connections */ + bp->cnic_eth_dev.max_iscsi_conn = + (max_iscsi_conn & BNX2X_MAX_ISCSI_INIT_CONN_MASK) >> + BNX2X_MAX_ISCSI_INIT_CONN_SHIFT; + + BNX2X_DEV_INFO("max_iscsi_conn 0x%x\n", + bp->cnic_eth_dev.max_iscsi_conn); + + /* + * If maximum allowed number of connections is zero - + * disable the feature. + */ + if (!bp->cnic_eth_dev.max_iscsi_conn) + bp->flags |= no_flags; +} + +static void bnx2x_get_ext_wwn_info(struct bnx2x *bp, int func) +{ + /* Port info */ + bp->cnic_eth_dev.fcoe_wwn_port_name_hi = + MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_upper); + bp->cnic_eth_dev.fcoe_wwn_port_name_lo = + MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_lower); + + /* Node info */ + bp->cnic_eth_dev.fcoe_wwn_node_name_hi = + MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_upper); + bp->cnic_eth_dev.fcoe_wwn_node_name_lo = + MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_lower); +} + +static int bnx2x_shared_fcoe_funcs(struct bnx2x *bp) +{ + u8 count = 0; + + if (IS_MF(bp)) { + u8 fid; + + /* iterate over absolute function ids for this path: */ + for (fid = BP_PATH(bp); fid < E2_FUNC_MAX * 2; fid += 2) { + if (IS_MF_SD(bp)) { + u32 cfg = MF_CFG_RD(bp, + func_mf_config[fid].config); + + if (!(cfg & FUNC_MF_CFG_FUNC_HIDE) && + ((cfg & FUNC_MF_CFG_PROTOCOL_MASK) == + FUNC_MF_CFG_PROTOCOL_FCOE)) + count++; + } else { + u32 cfg = MF_CFG_RD(bp, + func_ext_config[fid]. + func_cfg); + + if ((cfg & MACP_FUNC_CFG_FLAGS_ENABLED) && + (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)) + count++; + } + } + } else { /* SF */ + int port, port_cnt = CHIP_MODE_IS_4_PORT(bp) ? 2 : 1; + + for (port = 0; port < port_cnt; port++) { + u32 lic = SHMEM_RD(bp, + drv_lic_key[port].max_fcoe_conn) ^ + FW_ENCODE_32BIT_PATTERN; + if (lic) + count++; + } + } + + return count; +} + +static void bnx2x_get_fcoe_info(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int func = BP_ABS_FUNC(bp); + u32 max_fcoe_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp, + drv_lic_key[port].max_fcoe_conn); + u8 num_fcoe_func = bnx2x_shared_fcoe_funcs(bp); + + if (!CNIC_SUPPORT(bp)) { + bp->flags |= NO_FCOE_FLAG; + return; + } + + /* Get the number of maximum allowed FCoE connections */ + bp->cnic_eth_dev.max_fcoe_conn = + (max_fcoe_conn & BNX2X_MAX_FCOE_INIT_CONN_MASK) >> + BNX2X_MAX_FCOE_INIT_CONN_SHIFT; + + /* Calculate the number of maximum allowed FCoE tasks */ + bp->cnic_eth_dev.max_fcoe_exchanges = MAX_NUM_FCOE_TASKS_PER_ENGINE; + + /* check if FCoE resources must be shared between different functions */ + if (num_fcoe_func) + bp->cnic_eth_dev.max_fcoe_exchanges /= num_fcoe_func; + + /* Read the WWN: */ + if (!IS_MF(bp)) { + /* Port info */ + bp->cnic_eth_dev.fcoe_wwn_port_name_hi = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_port_name_upper); + bp->cnic_eth_dev.fcoe_wwn_port_name_lo = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_port_name_lower); + + /* Node info */ + bp->cnic_eth_dev.fcoe_wwn_node_name_hi = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_node_name_upper); + bp->cnic_eth_dev.fcoe_wwn_node_name_lo = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_node_name_lower); + } else if (!IS_MF_SD(bp)) { + /* Read the WWN info only if the FCoE feature is enabled for + * this function. + */ + if (BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp)) + bnx2x_get_ext_wwn_info(bp, func); + } else { + if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp)) + bnx2x_get_ext_wwn_info(bp, func); + } + + BNX2X_DEV_INFO("max_fcoe_conn 0x%x\n", bp->cnic_eth_dev.max_fcoe_conn); + + /* + * If maximum allowed number of connections is zero - + * disable the feature. + */ + if (!bp->cnic_eth_dev.max_fcoe_conn) + bp->flags |= NO_FCOE_FLAG; +} + +static void bnx2x_get_cnic_info(struct bnx2x *bp) +{ + /* + * iSCSI may be dynamically disabled but reading + * info here we will decrease memory usage by driver + * if the feature is disabled for good + */ + bnx2x_get_iscsi_info(bp); + bnx2x_get_fcoe_info(bp); +} + +static void bnx2x_get_cnic_mac_hwinfo(struct bnx2x *bp) +{ + u32 val, val2; + int func = BP_ABS_FUNC(bp); + int port = BP_PORT(bp); + u8 *iscsi_mac = bp->cnic_eth_dev.iscsi_mac; + u8 *fip_mac = bp->fip_mac; + + if (IS_MF(bp)) { + /* iSCSI and FCoE NPAR MACs: if there is no either iSCSI or + * FCoE MAC then the appropriate feature should be disabled. + * In non SD mode features configuration comes from struct + * func_ext_config. + */ + if (!IS_MF_SD(bp)) { + u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg); + if (cfg & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) { + val2 = MF_CFG_RD(bp, func_ext_config[func]. + iscsi_mac_addr_upper); + val = MF_CFG_RD(bp, func_ext_config[func]. + iscsi_mac_addr_lower); + bnx2x_set_mac_buf(iscsi_mac, val, val2); + BNX2X_DEV_INFO + ("Read iSCSI MAC: %pM\n", iscsi_mac); + } else { + bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG; + } + + if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) { + val2 = MF_CFG_RD(bp, func_ext_config[func]. + fcoe_mac_addr_upper); + val = MF_CFG_RD(bp, func_ext_config[func]. + fcoe_mac_addr_lower); + bnx2x_set_mac_buf(fip_mac, val, val2); + BNX2X_DEV_INFO + ("Read FCoE L2 MAC: %pM\n", fip_mac); + } else { + bp->flags |= NO_FCOE_FLAG; + } + + bp->mf_ext_config = cfg; + + } else { /* SD MODE */ + if (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp)) { + /* use primary mac as iscsi mac */ + memcpy(iscsi_mac, bp->dev->dev_addr, ETH_ALEN); + + BNX2X_DEV_INFO("SD ISCSI MODE\n"); + BNX2X_DEV_INFO + ("Read iSCSI MAC: %pM\n", iscsi_mac); + } else if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) { + /* use primary mac as fip mac */ + memcpy(fip_mac, bp->dev->dev_addr, ETH_ALEN); + BNX2X_DEV_INFO("SD FCoE MODE\n"); + BNX2X_DEV_INFO + ("Read FIP MAC: %pM\n", fip_mac); + } + } + + /* If this is a storage-only interface, use SAN mac as + * primary MAC. Notice that for SD this is already the case, + * as the SAN mac was copied from the primary MAC. + */ + if (IS_MF_FCOE_AFEX(bp)) + memcpy(bp->dev->dev_addr, fip_mac, ETH_ALEN); + } else { + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port]. + iscsi_mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port]. + iscsi_mac_lower); + bnx2x_set_mac_buf(iscsi_mac, val, val2); + + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port]. + fcoe_fip_mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port]. + fcoe_fip_mac_lower); + bnx2x_set_mac_buf(fip_mac, val, val2); + } + + /* Disable iSCSI OOO if MAC configuration is invalid. */ + if (!is_valid_ether_addr(iscsi_mac)) { + bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG; + eth_zero_addr(iscsi_mac); + } + + /* Disable FCoE if MAC configuration is invalid. */ + if (!is_valid_ether_addr(fip_mac)) { + bp->flags |= NO_FCOE_FLAG; + eth_zero_addr(bp->fip_mac); + } +} + +static void bnx2x_get_mac_hwinfo(struct bnx2x *bp) +{ + u32 val, val2; + int func = BP_ABS_FUNC(bp); + int port = BP_PORT(bp); + + /* Zero primary MAC configuration */ + eth_zero_addr(bp->dev->dev_addr); + + if (BP_NOMCP(bp)) { + BNX2X_ERROR("warning: random MAC workaround active\n"); + eth_hw_addr_random(bp->dev); + } else if (IS_MF(bp)) { + val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper); + val = MF_CFG_RD(bp, func_mf_config[func].mac_lower); + if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) && + (val != FUNC_MF_CFG_LOWERMAC_DEFAULT)) + bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2); + + if (CNIC_SUPPORT(bp)) + bnx2x_get_cnic_mac_hwinfo(bp); + } else { + /* in SF read MACs from port configuration */ + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower); + bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2); + + if (CNIC_SUPPORT(bp)) + bnx2x_get_cnic_mac_hwinfo(bp); + } + + if (!BP_NOMCP(bp)) { + /* Read physical port identifier from shmem */ + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower); + bnx2x_set_mac_buf(bp->phys_port_id, val, val2); + bp->flags |= HAS_PHYS_PORT_ID; + } + + memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN); + + if (!is_valid_ether_addr(bp->dev->dev_addr)) + dev_err(&bp->pdev->dev, + "bad Ethernet MAC address configuration: %pM\n" + "change it manually before bringing up the appropriate network interface\n", + bp->dev->dev_addr); +} + +static bool bnx2x_get_dropless_info(struct bnx2x *bp) +{ + int tmp; + u32 cfg; + + if (IS_VF(bp)) + return false; + + if (IS_MF(bp) && !CHIP_IS_E1x(bp)) { + /* Take function: tmp = func */ + tmp = BP_ABS_FUNC(bp); + cfg = MF_CFG_RD(bp, func_ext_config[tmp].func_cfg); + cfg = !!(cfg & MACP_FUNC_CFG_PAUSE_ON_HOST_RING); + } else { + /* Take port: tmp = port */ + tmp = BP_PORT(bp); + cfg = SHMEM_RD(bp, + dev_info.port_hw_config[tmp].generic_features); + cfg = !!(cfg & PORT_HW_CFG_PAUSE_ON_HOST_RING_ENABLED); + } + return cfg; +} + +static void validate_set_si_mode(struct bnx2x *bp) +{ + u8 func = BP_ABS_FUNC(bp); + u32 val; + + val = MF_CFG_RD(bp, func_mf_config[func].mac_upper); + + /* check for legal mac (upper bytes) */ + if (val != 0xffff) { + bp->mf_mode = MULTI_FUNCTION_SI; + bp->mf_config[BP_VN(bp)] = + MF_CFG_RD(bp, func_mf_config[func].config); + } else + BNX2X_DEV_INFO("illegal MAC address for SI\n"); +} + +static int bnx2x_get_hwinfo(struct bnx2x *bp) +{ + int /*abs*/func = BP_ABS_FUNC(bp); + int vn; + u32 val = 0, val2 = 0; + int rc = 0; + + /* Validate that chip access is feasible */ + if (REG_RD(bp, MISC_REG_CHIP_NUM) == 0xffffffff) { + dev_err(&bp->pdev->dev, + "Chip read returns all Fs. Preventing probe from continuing\n"); + return -EINVAL; + } + + bnx2x_get_common_hwinfo(bp); + + /* + * initialize IGU parameters + */ + if (CHIP_IS_E1x(bp)) { + bp->common.int_block = INT_BLOCK_HC; + + bp->igu_dsb_id = DEF_SB_IGU_ID; + bp->igu_base_sb = 0; + } else { + bp->common.int_block = INT_BLOCK_IGU; + + /* do not allow device reset during IGU info processing */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + + val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); + + if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { + int tout = 5000; + + BNX2X_DEV_INFO("FORCING Normal Mode\n"); + + val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN); + REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, val); + REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x7f); + + while (tout && REG_RD(bp, IGU_REG_RESET_MEMORIES)) { + tout--; + usleep_range(1000, 2000); + } + + if (REG_RD(bp, IGU_REG_RESET_MEMORIES)) { + dev_err(&bp->pdev->dev, + "FORCING Normal Mode failed!!!\n"); + bnx2x_release_hw_lock(bp, + HW_LOCK_RESOURCE_RESET); + return -EPERM; + } + } + + if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { + BNX2X_DEV_INFO("IGU Backward Compatible Mode\n"); + bp->common.int_block |= INT_BLOCK_MODE_BW_COMP; + } else + BNX2X_DEV_INFO("IGU Normal Mode\n"); + + rc = bnx2x_get_igu_cam_info(bp); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + if (rc) + return rc; + } + + /* + * set base FW non-default (fast path) status block id, this value is + * used to initialize the fw_sb_id saved on the fp/queue structure to + * determine the id used by the FW. + */ + if (CHIP_IS_E1x(bp)) + bp->base_fw_ndsb = BP_PORT(bp) * FP_SB_MAX_E1x + BP_L_ID(bp); + else /* + * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of + * the same queue are indicated on the same IGU SB). So we prefer + * FW and IGU SBs to be the same value. + */ + bp->base_fw_ndsb = bp->igu_base_sb; + + BNX2X_DEV_INFO("igu_dsb_id %d igu_base_sb %d igu_sb_cnt %d\n" + "base_fw_ndsb %d\n", bp->igu_dsb_id, bp->igu_base_sb, + bp->igu_sb_cnt, bp->base_fw_ndsb); + + /* + * Initialize MF configuration + */ + + bp->mf_ov = 0; + bp->mf_mode = 0; + bp->mf_sub_mode = 0; + vn = BP_VN(bp); + + if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) { + BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n", + bp->common.shmem2_base, SHMEM2_RD(bp, size), + (u32)offsetof(struct shmem2_region, mf_cfg_addr)); + + if (SHMEM2_HAS(bp, mf_cfg_addr)) + bp->common.mf_cfg_base = SHMEM2_RD(bp, mf_cfg_addr); + else + bp->common.mf_cfg_base = bp->common.shmem_base + + offsetof(struct shmem_region, func_mb) + + E1H_FUNC_MAX * sizeof(struct drv_func_mb); + /* + * get mf configuration: + * 1. Existence of MF configuration + * 2. MAC address must be legal (check only upper bytes) + * for Switch-Independent mode; + * OVLAN must be legal for Switch-Dependent mode + * 3. SF_MODE configures specific MF mode + */ + if (bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) { + /* get mf configuration */ + val = SHMEM_RD(bp, + dev_info.shared_feature_config.config); + val &= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK; + + switch (val) { + case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT: + validate_set_si_mode(bp); + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE: + if ((!CHIP_IS_E1x(bp)) && + (MF_CFG_RD(bp, func_mf_config[func]. + mac_upper) != 0xffff) && + (SHMEM2_HAS(bp, + afex_driver_support))) { + bp->mf_mode = MULTI_FUNCTION_AFEX; + bp->mf_config[vn] = MF_CFG_RD(bp, + func_mf_config[func].config); + } else { + BNX2X_DEV_INFO("can not configure afex mode\n"); + } + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED: + /* get OV configuration */ + val = MF_CFG_RD(bp, + func_mf_config[FUNC_0].e1hov_tag); + val &= FUNC_MF_CFG_E1HOV_TAG_MASK; + + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { + bp->mf_mode = MULTI_FUNCTION_SD; + bp->mf_config[vn] = MF_CFG_RD(bp, + func_mf_config[func].config); + } else + BNX2X_DEV_INFO("illegal OV for SD\n"); + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE: + bp->mf_mode = MULTI_FUNCTION_SD; + bp->mf_sub_mode = SUB_MF_MODE_UFP; + bp->mf_config[vn] = + MF_CFG_RD(bp, + func_mf_config[func].config); + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF: + bp->mf_config[vn] = 0; + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE: + val2 = SHMEM_RD(bp, + dev_info.shared_hw_config.config_3); + val2 &= SHARED_HW_CFG_EXTENDED_MF_MODE_MASK; + switch (val2) { + case SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR1_DOT_5: + validate_set_si_mode(bp); + bp->mf_sub_mode = + SUB_MF_MODE_NPAR1_DOT_5; + break; + default: + /* Unknown configuration */ + bp->mf_config[vn] = 0; + BNX2X_DEV_INFO("unknown extended MF mode 0x%x\n", + val); + } + break; + default: + /* Unknown configuration: reset mf_config */ + bp->mf_config[vn] = 0; + BNX2X_DEV_INFO("unknown MF mode 0x%x\n", val); + } + } + + BNX2X_DEV_INFO("%s function mode\n", + IS_MF(bp) ? "multi" : "single"); + + switch (bp->mf_mode) { + case MULTI_FUNCTION_SD: + val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & + FUNC_MF_CFG_E1HOV_TAG_MASK; + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { + bp->mf_ov = val; + bp->path_has_ovlan = true; + + BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n", + func, bp->mf_ov, bp->mf_ov); + } else if (bp->mf_sub_mode == SUB_MF_MODE_UFP) { + dev_err(&bp->pdev->dev, + "Unexpected - no valid MF OV for func %d in UFP mode\n", + func); + bp->path_has_ovlan = true; + } else { + dev_err(&bp->pdev->dev, + "No valid MF OV for func %d, aborting\n", + func); + return -EPERM; + } + break; + case MULTI_FUNCTION_AFEX: + BNX2X_DEV_INFO("func %d is in MF afex mode\n", func); + break; + case MULTI_FUNCTION_SI: + BNX2X_DEV_INFO("func %d is in MF switch-independent mode\n", + func); + break; + default: + if (vn) { + dev_err(&bp->pdev->dev, + "VN %d is in a single function mode, aborting\n", + vn); + return -EPERM; + } + break; + } + + /* check if other port on the path needs ovlan: + * Since MF configuration is shared between ports + * Possible mixed modes are only + * {SF, SI} {SF, SD} {SD, SF} {SI, SF} + */ + if (CHIP_MODE_IS_4_PORT(bp) && + !bp->path_has_ovlan && + !IS_MF(bp) && + bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) { + u8 other_port = !BP_PORT(bp); + u8 other_func = BP_PATH(bp) + 2*other_port; + val = MF_CFG_RD(bp, + func_mf_config[other_func].e1hov_tag); + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) + bp->path_has_ovlan = true; + } + } + + /* adjust igu_sb_cnt to MF for E1H */ + if (CHIP_IS_E1H(bp) && IS_MF(bp)) + bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT); + + /* port info */ + bnx2x_get_port_hwinfo(bp); + + /* Get MAC addresses */ + bnx2x_get_mac_hwinfo(bp); + + bnx2x_get_cnic_info(bp); + + return rc; +} + +static void bnx2x_read_fwinfo(struct bnx2x *bp) +{ + int cnt, i, block_end, rodi; + char vpd_start[BNX2X_VPD_LEN+1]; + char str_id_reg[VENDOR_ID_LEN+1]; + char str_id_cap[VENDOR_ID_LEN+1]; + char *vpd_data; + char *vpd_extended_data = NULL; + u8 len; + + cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_start); + memset(bp->fw_ver, 0, sizeof(bp->fw_ver)); + + if (cnt < BNX2X_VPD_LEN) + goto out_not_found; + + /* VPD RO tag should be first tag after identifier string, hence + * we should be able to find it in first BNX2X_VPD_LEN chars + */ + i = pci_vpd_find_tag(vpd_start, 0, BNX2X_VPD_LEN, + PCI_VPD_LRDT_RO_DATA); + if (i < 0) + goto out_not_found; + + block_end = i + PCI_VPD_LRDT_TAG_SIZE + + pci_vpd_lrdt_size(&vpd_start[i]); + + i += PCI_VPD_LRDT_TAG_SIZE; + + if (block_end > BNX2X_VPD_LEN) { + vpd_extended_data = kmalloc(block_end, GFP_KERNEL); + if (vpd_extended_data == NULL) + goto out_not_found; + + /* read rest of vpd image into vpd_extended_data */ + memcpy(vpd_extended_data, vpd_start, BNX2X_VPD_LEN); + cnt = pci_read_vpd(bp->pdev, BNX2X_VPD_LEN, + block_end - BNX2X_VPD_LEN, + vpd_extended_data + BNX2X_VPD_LEN); + if (cnt < (block_end - BNX2X_VPD_LEN)) + goto out_not_found; + vpd_data = vpd_extended_data; + } else + vpd_data = vpd_start; + + /* now vpd_data holds full vpd content in both cases */ + + rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end, + PCI_VPD_RO_KEYWORD_MFR_ID); + if (rodi < 0) + goto out_not_found; + + len = pci_vpd_info_field_size(&vpd_data[rodi]); + + if (len != VENDOR_ID_LEN) + goto out_not_found; + + rodi += PCI_VPD_INFO_FLD_HDR_SIZE; + + /* vendor specific info */ + snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL); + snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL); + if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) || + !strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) { + + rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end, + PCI_VPD_RO_KEYWORD_VENDOR0); + if (rodi >= 0) { + len = pci_vpd_info_field_size(&vpd_data[rodi]); + + rodi += PCI_VPD_INFO_FLD_HDR_SIZE; + + if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) { + memcpy(bp->fw_ver, &vpd_data[rodi], len); + bp->fw_ver[len] = ' '; + } + } + kfree(vpd_extended_data); + return; + } +out_not_found: + kfree(vpd_extended_data); + return; +} + +static void bnx2x_set_modes_bitmap(struct bnx2x *bp) +{ + u32 flags = 0; + + if (CHIP_REV_IS_FPGA(bp)) + SET_FLAGS(flags, MODE_FPGA); + else if (CHIP_REV_IS_EMUL(bp)) + SET_FLAGS(flags, MODE_EMUL); + else + SET_FLAGS(flags, MODE_ASIC); + + if (CHIP_MODE_IS_4_PORT(bp)) + SET_FLAGS(flags, MODE_PORT4); + else + SET_FLAGS(flags, MODE_PORT2); + + if (CHIP_IS_E2(bp)) + SET_FLAGS(flags, MODE_E2); + else if (CHIP_IS_E3(bp)) { + SET_FLAGS(flags, MODE_E3); + if (CHIP_REV(bp) == CHIP_REV_Ax) + SET_FLAGS(flags, MODE_E3_A0); + else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/ + SET_FLAGS(flags, MODE_E3_B0 | MODE_COS3); + } + + if (IS_MF(bp)) { + SET_FLAGS(flags, MODE_MF); + switch (bp->mf_mode) { + case MULTI_FUNCTION_SD: + SET_FLAGS(flags, MODE_MF_SD); + break; + case MULTI_FUNCTION_SI: + SET_FLAGS(flags, MODE_MF_SI); + break; + case MULTI_FUNCTION_AFEX: + SET_FLAGS(flags, MODE_MF_AFEX); + break; + } + } else + SET_FLAGS(flags, MODE_SF); + +#if defined(__LITTLE_ENDIAN) + SET_FLAGS(flags, MODE_LITTLE_ENDIAN); +#else /*(__BIG_ENDIAN)*/ + SET_FLAGS(flags, MODE_BIG_ENDIAN); +#endif + INIT_MODE_FLAGS(bp) = flags; +} + +static int bnx2x_init_bp(struct bnx2x *bp) +{ + int func; + int rc; + + mutex_init(&bp->port.phy_mutex); + mutex_init(&bp->fw_mb_mutex); + mutex_init(&bp->drv_info_mutex); + sema_init(&bp->stats_lock, 1); + bp->drv_info_mng_owner = false; + + INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task); + INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task); + INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task); + INIT_DELAYED_WORK(&bp->iov_task, bnx2x_iov_task); + if (IS_PF(bp)) { + rc = bnx2x_get_hwinfo(bp); + if (rc) + return rc; + } else { + eth_zero_addr(bp->dev->dev_addr); + } + + bnx2x_set_modes_bitmap(bp); + + rc = bnx2x_alloc_mem_bp(bp); + if (rc) + return rc; + + bnx2x_read_fwinfo(bp); + + func = BP_FUNC(bp); + + /* need to reset chip if undi was active */ + if (IS_PF(bp) && !BP_NOMCP(bp)) { + /* init fw_seq */ + bp->fw_seq = + SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK; + BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); + + rc = bnx2x_prev_unload(bp); + if (rc) { + bnx2x_free_mem_bp(bp); + return rc; + } + } + + if (CHIP_REV_IS_FPGA(bp)) + dev_err(&bp->pdev->dev, "FPGA detected\n"); + + if (BP_NOMCP(bp) && (func == 0)) + dev_err(&bp->pdev->dev, "MCP disabled, must load devices in order!\n"); + + bp->disable_tpa = disable_tpa; + bp->disable_tpa |= !!IS_MF_STORAGE_ONLY(bp); + /* Reduce memory usage in kdump environment by disabling TPA */ + bp->disable_tpa |= is_kdump_kernel(); + + /* Set TPA flags */ + if (bp->disable_tpa) { + bp->dev->hw_features &= ~NETIF_F_LRO; + bp->dev->features &= ~NETIF_F_LRO; + } + + if (CHIP_IS_E1(bp)) + bp->dropless_fc = 0; + else + bp->dropless_fc = dropless_fc | bnx2x_get_dropless_info(bp); + + bp->mrrs = mrrs; + + bp->tx_ring_size = IS_MF_STORAGE_ONLY(bp) ? 0 : MAX_TX_AVAIL; + if (IS_VF(bp)) + bp->rx_ring_size = MAX_RX_AVAIL; + + /* make sure that the numbers are in the right granularity */ + bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR; + bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR; + + bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ; + + init_timer(&bp->timer); + bp->timer.expires = jiffies + bp->current_interval; + bp->timer.data = (unsigned long) bp; + bp->timer.function = bnx2x_timer; + + if (SHMEM2_HAS(bp, dcbx_lldp_params_offset) && + SHMEM2_HAS(bp, dcbx_lldp_dcbx_stat_offset) && + SHMEM2_RD(bp, dcbx_lldp_params_offset) && + SHMEM2_RD(bp, dcbx_lldp_dcbx_stat_offset)) { + bnx2x_dcbx_set_state(bp, true, BNX2X_DCBX_ENABLED_ON_NEG_ON); + bnx2x_dcbx_init_params(bp); + } else { + bnx2x_dcbx_set_state(bp, false, BNX2X_DCBX_ENABLED_OFF); + } + + if (CHIP_IS_E1x(bp)) + bp->cnic_base_cl_id = FP_SB_MAX_E1x; + else + bp->cnic_base_cl_id = FP_SB_MAX_E2; + + /* multiple tx priority */ + if (IS_VF(bp)) + bp->max_cos = 1; + else if (CHIP_IS_E1x(bp)) + bp->max_cos = BNX2X_MULTI_TX_COS_E1X; + else if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) + bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0; + else if (CHIP_IS_E3B0(bp)) + bp->max_cos = BNX2X_MULTI_TX_COS_E3B0; + else + BNX2X_ERR("unknown chip %x revision %x\n", + CHIP_NUM(bp), CHIP_REV(bp)); + BNX2X_DEV_INFO("set bp->max_cos to %d\n", bp->max_cos); + + /* We need at least one default status block for slow-path events, + * second status block for the L2 queue, and a third status block for + * CNIC if supported. + */ + if (IS_VF(bp)) + bp->min_msix_vec_cnt = 1; + else if (CNIC_SUPPORT(bp)) + bp->min_msix_vec_cnt = 3; + else /* PF w/o cnic */ + bp->min_msix_vec_cnt = 2; + BNX2X_DEV_INFO("bp->min_msix_vec_cnt %d", bp->min_msix_vec_cnt); + + bp->dump_preset_idx = 1; + + if (CHIP_IS_E3B0(bp)) + bp->flags |= PTP_SUPPORTED; + + return rc; +} + +/**************************************************************************** +* General service functions +****************************************************************************/ + +/* + * net_device service functions + */ + +/* called with rtnl_lock */ +static int bnx2x_open(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + int rc; + + bp->stats_init = true; + + netif_carrier_off(dev); + + bnx2x_set_power_state(bp, PCI_D0); + + /* If parity had happen during the unload, then attentions + * and/or RECOVERY_IN_PROGRES may still be set. In this case we + * want the first function loaded on the current engine to + * complete the recovery. + * Parity recovery is only relevant for PF driver. + */ + if (IS_PF(bp)) { + int other_engine = BP_PATH(bp) ? 0 : 1; + bool other_load_status, load_status; + bool global = false; + + other_load_status = bnx2x_get_load_status(bp, other_engine); + load_status = bnx2x_get_load_status(bp, BP_PATH(bp)); + if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) || + bnx2x_chk_parity_attn(bp, &global, true)) { + do { + /* If there are attentions and they are in a + * global blocks, set the GLOBAL_RESET bit + * regardless whether it will be this function + * that will complete the recovery or not. + */ + if (global) + bnx2x_set_reset_global(bp); + + /* Only the first function on the current + * engine should try to recover in open. In case + * of attentions in global blocks only the first + * in the chip should try to recover. + */ + if ((!load_status && + (!global || !other_load_status)) && + bnx2x_trylock_leader_lock(bp) && + !bnx2x_leader_reset(bp)) { + netdev_info(bp->dev, + "Recovered in open\n"); + break; + } + + /* recovery has failed... */ + bnx2x_set_power_state(bp, PCI_D3hot); + bp->recovery_state = BNX2X_RECOVERY_FAILED; + + BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n" + "If you still see this message after a few retries then power cycle is required.\n"); + + return -EAGAIN; + } while (0); + } + } + + bp->recovery_state = BNX2X_RECOVERY_DONE; + rc = bnx2x_nic_load(bp, LOAD_OPEN); + if (rc) + return rc; + return 0; +} + +/* called with rtnl_lock */ +static int bnx2x_close(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + /* Unload the driver, release IRQs */ + bnx2x_nic_unload(bp, UNLOAD_CLOSE, false); + + return 0; +} + +static int bnx2x_init_mcast_macs_list(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p) +{ + int mc_count = netdev_mc_count(bp->dev); + struct bnx2x_mcast_list_elem *mc_mac = + kcalloc(mc_count, sizeof(*mc_mac), GFP_ATOMIC); + struct netdev_hw_addr *ha; + + if (!mc_mac) + return -ENOMEM; + + INIT_LIST_HEAD(&p->mcast_list); + + netdev_for_each_mc_addr(ha, bp->dev) { + mc_mac->mac = bnx2x_mc_addr(ha); + list_add_tail(&mc_mac->link, &p->mcast_list); + mc_mac++; + } + + p->mcast_list_len = mc_count; + + return 0; +} + +static void bnx2x_free_mcast_macs_list( + struct bnx2x_mcast_ramrod_params *p) +{ + struct bnx2x_mcast_list_elem *mc_mac = + list_first_entry(&p->mcast_list, struct bnx2x_mcast_list_elem, + link); + + WARN_ON(!mc_mac); + kfree(mc_mac); +} + +/** + * bnx2x_set_uc_list - configure a new unicast MACs list. + * + * @bp: driver handle + * + * We will use zero (0) as a MAC type for these MACs. + */ +static int bnx2x_set_uc_list(struct bnx2x *bp) +{ + int rc; + struct net_device *dev = bp->dev; + struct netdev_hw_addr *ha; + struct bnx2x_vlan_mac_obj *mac_obj = &bp->sp_objs->mac_obj; + unsigned long ramrod_flags = 0; + + /* First schedule a cleanup up of old configuration */ + rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, false); + if (rc < 0) { + BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc); + return rc; + } + + netdev_for_each_uc_addr(ha, dev) { + rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true, + BNX2X_UC_LIST_MAC, &ramrod_flags); + if (rc == -EEXIST) { + DP(BNX2X_MSG_SP, + "Failed to schedule ADD operations: %d\n", rc); + /* do not treat adding same MAC as error */ + rc = 0; + + } else if (rc < 0) { + + BNX2X_ERR("Failed to schedule ADD operations: %d\n", + rc); + return rc; + } + } + + /* Execute the pending commands */ + __set_bit(RAMROD_CONT, &ramrod_flags); + return bnx2x_set_mac_one(bp, NULL, mac_obj, false /* don't care */, + BNX2X_UC_LIST_MAC, &ramrod_flags); +} + +static int bnx2x_set_mc_list(struct bnx2x *bp) +{ + struct net_device *dev = bp->dev; + struct bnx2x_mcast_ramrod_params rparam = {NULL}; + int rc = 0; + + rparam.mcast_obj = &bp->mcast_obj; + + /* first, clear all configured multicast MACs */ + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); + if (rc < 0) { + BNX2X_ERR("Failed to clear multicast configuration: %d\n", rc); + return rc; + } + + /* then, configure a new MACs list */ + if (netdev_mc_count(dev)) { + rc = bnx2x_init_mcast_macs_list(bp, &rparam); + if (rc) { + BNX2X_ERR("Failed to create multicast MACs list: %d\n", + rc); + return rc; + } + + /* Now add the new MACs */ + rc = bnx2x_config_mcast(bp, &rparam, + BNX2X_MCAST_CMD_ADD); + if (rc < 0) + BNX2X_ERR("Failed to set a new multicast configuration: %d\n", + rc); + + bnx2x_free_mcast_macs_list(&rparam); + } + + return rc; +} + +/* If bp->state is OPEN, should be called with netif_addr_lock_bh() */ +static void bnx2x_set_rx_mode(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (bp->state != BNX2X_STATE_OPEN) { + DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state); + return; + } else { + /* Schedule an SP task to handle rest of change */ + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_RX_MODE, + NETIF_MSG_IFUP); + } +} + +void bnx2x_set_rx_mode_inner(struct bnx2x *bp) +{ + u32 rx_mode = BNX2X_RX_MODE_NORMAL; + + DP(NETIF_MSG_IFUP, "dev->flags = %x\n", bp->dev->flags); + + netif_addr_lock_bh(bp->dev); + + if (bp->dev->flags & IFF_PROMISC) { + rx_mode = BNX2X_RX_MODE_PROMISC; + } else if ((bp->dev->flags & IFF_ALLMULTI) || + ((netdev_mc_count(bp->dev) > BNX2X_MAX_MULTICAST) && + CHIP_IS_E1(bp))) { + rx_mode = BNX2X_RX_MODE_ALLMULTI; + } else { + if (IS_PF(bp)) { + /* some multicasts */ + if (bnx2x_set_mc_list(bp) < 0) + rx_mode = BNX2X_RX_MODE_ALLMULTI; + + /* release bh lock, as bnx2x_set_uc_list might sleep */ + netif_addr_unlock_bh(bp->dev); + if (bnx2x_set_uc_list(bp) < 0) + rx_mode = BNX2X_RX_MODE_PROMISC; + netif_addr_lock_bh(bp->dev); + } else { + /* configuring mcast to a vf involves sleeping (when we + * wait for the pf's response). + */ + bnx2x_schedule_sp_rtnl(bp, + BNX2X_SP_RTNL_VFPF_MCAST, 0); + } + } + + bp->rx_mode = rx_mode; + /* handle ISCSI SD mode */ + if (IS_MF_ISCSI_ONLY(bp)) + bp->rx_mode = BNX2X_RX_MODE_NONE; + + /* Schedule the rx_mode command */ + if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) { + set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state); + netif_addr_unlock_bh(bp->dev); + return; + } + + if (IS_PF(bp)) { + bnx2x_set_storm_rx_mode(bp); + netif_addr_unlock_bh(bp->dev); + } else { + /* VF will need to request the PF to make this change, and so + * the VF needs to release the bottom-half lock prior to the + * request (as it will likely require sleep on the VF side) + */ + netif_addr_unlock_bh(bp->dev); + bnx2x_vfpf_storm_rx_mode(bp); + } +} + +/* called with rtnl_lock */ +static int bnx2x_mdio_read(struct net_device *netdev, int prtad, + int devad, u16 addr) +{ + struct bnx2x *bp = netdev_priv(netdev); + u16 value; + int rc; + + DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n", + prtad, devad, addr); + + /* The HW expects different devad if CL22 is used */ + devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad; + + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_phy_read(&bp->link_params, prtad, devad, addr, &value); + bnx2x_release_phy_lock(bp); + DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc); + + if (!rc) + rc = value; + return rc; +} + +/* called with rtnl_lock */ +static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad, + u16 addr, u16 value) +{ + struct bnx2x *bp = netdev_priv(netdev); + int rc; + + DP(NETIF_MSG_LINK, + "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x, value 0x%x\n", + prtad, devad, addr, value); + + /* The HW expects different devad if CL22 is used */ + devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad; + + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_phy_write(&bp->link_params, prtad, devad, addr, value); + bnx2x_release_phy_lock(bp); + return rc; +} + +/* called with rtnl_lock */ +static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct bnx2x *bp = netdev_priv(dev); + struct mii_ioctl_data *mdio = if_mii(ifr); + + if (!netif_running(dev)) + return -EAGAIN; + + switch (cmd) { + case SIOCSHWTSTAMP: + return bnx2x_hwtstamp_ioctl(bp, ifr); + default: + DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n", + mdio->phy_id, mdio->reg_num, mdio->val_in); + return mdio_mii_ioctl(&bp->mdio, mdio, cmd); + } +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void poll_bnx2x(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + int i; + + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + napi_schedule(&bnx2x_fp(bp, fp->index, napi)); + } +} +#endif + +static int bnx2x_validate_addr(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + /* query the bulletin board for mac address configured by the PF */ + if (IS_VF(bp)) + bnx2x_sample_bulletin(bp); + + if (!is_valid_ether_addr(dev->dev_addr)) { + BNX2X_ERR("Non-valid Ethernet address\n"); + return -EADDRNOTAVAIL; + } + return 0; +} + +static int bnx2x_get_phys_port_id(struct net_device *netdev, + struct netdev_phys_item_id *ppid) +{ + struct bnx2x *bp = netdev_priv(netdev); + + if (!(bp->flags & HAS_PHYS_PORT_ID)) + return -EOPNOTSUPP; + + ppid->id_len = sizeof(bp->phys_port_id); + memcpy(ppid->id, bp->phys_port_id, ppid->id_len); + + return 0; +} + +static netdev_features_t bnx2x_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) +{ + features = vlan_features_check(skb, features); + return vxlan_features_check(skb, features); +} + +static const struct net_device_ops bnx2x_netdev_ops = { + .ndo_open = bnx2x_open, + .ndo_stop = bnx2x_close, + .ndo_start_xmit = bnx2x_start_xmit, + .ndo_select_queue = bnx2x_select_queue, + .ndo_set_rx_mode = bnx2x_set_rx_mode, + .ndo_set_mac_address = bnx2x_change_mac_addr, + .ndo_validate_addr = bnx2x_validate_addr, + .ndo_do_ioctl = bnx2x_ioctl, + .ndo_change_mtu = bnx2x_change_mtu, + .ndo_fix_features = bnx2x_fix_features, + .ndo_set_features = bnx2x_set_features, + .ndo_tx_timeout = bnx2x_tx_timeout, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = poll_bnx2x, +#endif + .ndo_setup_tc = bnx2x_setup_tc, +#ifdef CONFIG_BNX2X_SRIOV + .ndo_set_vf_mac = bnx2x_set_vf_mac, + .ndo_set_vf_vlan = bnx2x_set_vf_vlan, + .ndo_get_vf_config = bnx2x_get_vf_config, +#endif +#ifdef NETDEV_FCOE_WWNN + .ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn, +#endif + +#ifdef CONFIG_NET_RX_BUSY_POLL + .ndo_busy_poll = bnx2x_low_latency_recv, +#endif + .ndo_get_phys_port_id = bnx2x_get_phys_port_id, + .ndo_set_vf_link_state = bnx2x_set_vf_link_state, + .ndo_features_check = bnx2x_features_check, +}; + +static int bnx2x_set_coherency_mask(struct bnx2x *bp) +{ + struct device *dev = &bp->pdev->dev; + + if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)) != 0 && + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)) != 0) { + dev_err(dev, "System does not support DMA, aborting\n"); + return -EIO; + } + + return 0; +} + +static void bnx2x_disable_pcie_error_reporting(struct bnx2x *bp) +{ + if (bp->flags & AER_ENABLED) { + pci_disable_pcie_error_reporting(bp->pdev); + bp->flags &= ~AER_ENABLED; + } +} + +static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, + struct net_device *dev, unsigned long board_type) +{ + int rc; + u32 pci_cfg_dword; + bool chip_is_e1x = (board_type == BCM57710 || + board_type == BCM57711 || + board_type == BCM57711E); + + SET_NETDEV_DEV(dev, &pdev->dev); + + bp->dev = dev; + bp->pdev = pdev; + + rc = pci_enable_device(pdev); + if (rc) { + dev_err(&bp->pdev->dev, + "Cannot enable PCI device, aborting\n"); + goto err_out; + } + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + dev_err(&bp->pdev->dev, + "Cannot find PCI device base address, aborting\n"); + rc = -ENODEV; + goto err_out_disable; + } + + if (IS_PF(bp) && !(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { + dev_err(&bp->pdev->dev, "Cannot find second PCI device base address, aborting\n"); + rc = -ENODEV; + goto err_out_disable; + } + + pci_read_config_dword(pdev, PCICFG_REVISION_ID_OFFSET, &pci_cfg_dword); + if ((pci_cfg_dword & PCICFG_REVESION_ID_MASK) == + PCICFG_REVESION_ID_ERROR_VAL) { + pr_err("PCI device error, probably due to fan failure, aborting\n"); + rc = -ENODEV; + goto err_out_disable; + } + + if (atomic_read(&pdev->enable_cnt) == 1) { + rc = pci_request_regions(pdev, DRV_MODULE_NAME); + if (rc) { + dev_err(&bp->pdev->dev, + "Cannot obtain PCI resources, aborting\n"); + goto err_out_disable; + } + + pci_set_master(pdev); + pci_save_state(pdev); + } + + if (IS_PF(bp)) { + if (!pdev->pm_cap) { + dev_err(&bp->pdev->dev, + "Cannot find power management capability, aborting\n"); + rc = -EIO; + goto err_out_release; + } + } + + if (!pci_is_pcie(pdev)) { + dev_err(&bp->pdev->dev, "Not PCI Express, aborting\n"); + rc = -EIO; + goto err_out_release; + } + + rc = bnx2x_set_coherency_mask(bp); + if (rc) + goto err_out_release; + + dev->mem_start = pci_resource_start(pdev, 0); + dev->base_addr = dev->mem_start; + dev->mem_end = pci_resource_end(pdev, 0); + + dev->irq = pdev->irq; + + bp->regview = pci_ioremap_bar(pdev, 0); + if (!bp->regview) { + dev_err(&bp->pdev->dev, + "Cannot map register space, aborting\n"); + rc = -ENOMEM; + goto err_out_release; + } + + /* In E1/E1H use pci device function given by kernel. + * In E2/E3 read physical function from ME register since these chips + * support Physical Device Assignment where kernel BDF maybe arbitrary + * (depending on hypervisor). + */ + if (chip_is_e1x) { + bp->pf_num = PCI_FUNC(pdev->devfn); + } else { + /* chip is E2/3*/ + pci_read_config_dword(bp->pdev, + PCICFG_ME_REGISTER, &pci_cfg_dword); + bp->pf_num = (u8)((pci_cfg_dword & ME_REG_ABS_PF_NUM) >> + ME_REG_ABS_PF_NUM_SHIFT); + } + BNX2X_DEV_INFO("me reg PF num: %d\n", bp->pf_num); + + /* clean indirect addresses */ + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, + PCICFG_VENDOR_ID_OFFSET); + + /* Set PCIe reset type to fundamental for EEH recovery */ + pdev->needs_freset = 1; + + /* AER (Advanced Error reporting) configuration */ + rc = pci_enable_pcie_error_reporting(pdev); + if (!rc) + bp->flags |= AER_ENABLED; + else + BNX2X_DEV_INFO("Failed To configure PCIe AER [%d]\n", rc); + + /* + * Clean the following indirect addresses for all functions since it + * is not used by the driver. + */ + if (IS_PF(bp)) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); + + if (chip_is_e1x) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + } + + /* Enable internal target-read (in case we are probed after PF + * FLR). Must be done prior to any BAR read access. Only for + * 57712 and up + */ + if (!chip_is_e1x) + REG_WR(bp, + PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); + } + + dev->watchdog_timeo = TX_TIMEOUT; + + dev->netdev_ops = &bnx2x_netdev_ops; + bnx2x_set_ethtool_ops(bp, dev); + + dev->priv_flags |= IFF_UNICAST_FLT; + + dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | + NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO | + NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX; + if (!chip_is_e1x) { + dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL | + NETIF_F_GSO_IPIP | NETIF_F_GSO_SIT; + dev->hw_enc_features = + NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | + NETIF_F_GSO_IPIP | + NETIF_F_GSO_SIT | + NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL; + } + + dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA; + + dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX; + dev->features |= NETIF_F_HIGHDMA; + + /* Add Loopback capability to the device */ + dev->hw_features |= NETIF_F_LOOPBACK; + +#ifdef BCM_DCBNL + dev->dcbnl_ops = &bnx2x_dcbnl_ops; +#endif + + /* get_port_hwinfo() will set prtad and mmds properly */ + bp->mdio.prtad = MDIO_PRTAD_NONE; + bp->mdio.mmds = 0; + bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + bp->mdio.dev = dev; + bp->mdio.mdio_read = bnx2x_mdio_read; + bp->mdio.mdio_write = bnx2x_mdio_write; + + return 0; + +err_out_release: + if (atomic_read(&pdev->enable_cnt) == 1) + pci_release_regions(pdev); + +err_out_disable: + pci_disable_device(pdev); + +err_out: + return rc; +} + +static int bnx2x_check_firmware(struct bnx2x *bp) +{ + const struct firmware *firmware = bp->firmware; + struct bnx2x_fw_file_hdr *fw_hdr; + struct bnx2x_fw_file_section *sections; + u32 offset, len, num_ops; + __be16 *ops_offsets; + int i; + const u8 *fw_ver; + + if (firmware->size < sizeof(struct bnx2x_fw_file_hdr)) { + BNX2X_ERR("Wrong FW size\n"); + return -EINVAL; + } + + fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data; + sections = (struct bnx2x_fw_file_section *)fw_hdr; + + /* Make sure none of the offsets and sizes make us read beyond + * the end of the firmware data */ + for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) { + offset = be32_to_cpu(sections[i].offset); + len = be32_to_cpu(sections[i].len); + if (offset + len > firmware->size) { + BNX2X_ERR("Section %d length is out of bounds\n", i); + return -EINVAL; + } + } + + /* Likewise for the init_ops offsets */ + offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset); + ops_offsets = (__force __be16 *)(firmware->data + offset); + num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op); + + for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) { + if (be16_to_cpu(ops_offsets[i]) > num_ops) { + BNX2X_ERR("Section offset %d is out of bounds\n", i); + return -EINVAL; + } + } + + /* Check FW version */ + offset = be32_to_cpu(fw_hdr->fw_version.offset); + fw_ver = firmware->data + offset; + if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) || + (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) || + (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) || + (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) { + BNX2X_ERR("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n", + fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3], + BCM_5710_FW_MAJOR_VERSION, + BCM_5710_FW_MINOR_VERSION, + BCM_5710_FW_REVISION_VERSION, + BCM_5710_FW_ENGINEERING_VERSION); + return -EINVAL; + } + + return 0; +} + +static void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n) +{ + const __be32 *source = (const __be32 *)_source; + u32 *target = (u32 *)_target; + u32 i; + + for (i = 0; i < n/4; i++) + target[i] = be32_to_cpu(source[i]); +} + +/* + Ops array is stored in the following format: + {op(8bit), offset(24bit, big endian), data(32bit, big endian)} + */ +static void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n) +{ + const __be32 *source = (const __be32 *)_source; + struct raw_op *target = (struct raw_op *)_target; + u32 i, j, tmp; + + for (i = 0, j = 0; i < n/8; i++, j += 2) { + tmp = be32_to_cpu(source[j]); + target[i].op = (tmp >> 24) & 0xff; + target[i].offset = tmp & 0xffffff; + target[i].raw_data = be32_to_cpu(source[j + 1]); + } +} + +/* IRO array is stored in the following format: + * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) } + */ +static void bnx2x_prep_iro(const u8 *_source, u8 *_target, u32 n) +{ + const __be32 *source = (const __be32 *)_source; + struct iro *target = (struct iro *)_target; + u32 i, j, tmp; + + for (i = 0, j = 0; i < n/sizeof(struct iro); i++) { + target[i].base = be32_to_cpu(source[j]); + j++; + tmp = be32_to_cpu(source[j]); + target[i].m1 = (tmp >> 16) & 0xffff; + target[i].m2 = tmp & 0xffff; + j++; + tmp = be32_to_cpu(source[j]); + target[i].m3 = (tmp >> 16) & 0xffff; + target[i].size = tmp & 0xffff; + j++; + } +} + +static void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n) +{ + const __be16 *source = (const __be16 *)_source; + u16 *target = (u16 *)_target; + u32 i; + + for (i = 0; i < n/2; i++) + target[i] = be16_to_cpu(source[i]); +} + +#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \ +do { \ + u32 len = be32_to_cpu(fw_hdr->arr.len); \ + bp->arr = kmalloc(len, GFP_KERNEL); \ + if (!bp->arr) \ + goto lbl; \ + func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \ + (u8 *)bp->arr, len); \ +} while (0) + +static int bnx2x_init_firmware(struct bnx2x *bp) +{ + const char *fw_file_name; + struct bnx2x_fw_file_hdr *fw_hdr; + int rc; + + if (bp->firmware) + return 0; + + if (CHIP_IS_E1(bp)) + fw_file_name = FW_FILE_NAME_E1; + else if (CHIP_IS_E1H(bp)) + fw_file_name = FW_FILE_NAME_E1H; + else if (!CHIP_IS_E1x(bp)) + fw_file_name = FW_FILE_NAME_E2; + else { + BNX2X_ERR("Unsupported chip revision\n"); + return -EINVAL; + } + BNX2X_DEV_INFO("Loading %s\n", fw_file_name); + + rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev); + if (rc) { + BNX2X_ERR("Can't load firmware file %s\n", + fw_file_name); + goto request_firmware_exit; + } + + rc = bnx2x_check_firmware(bp); + if (rc) { + BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name); + goto request_firmware_exit; + } + + fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data; + + /* Initialize the pointers to the init arrays */ + /* Blob */ + BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n); + + /* Opcodes */ + BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops); + + /* Offsets */ + BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, + be16_to_cpu_n); + + /* STORMs firmware */ + INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->tsem_int_table_data.offset); + INIT_TSEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->tsem_pram_data.offset); + INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->usem_int_table_data.offset); + INIT_USEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->usem_pram_data.offset); + INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->xsem_int_table_data.offset); + INIT_XSEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->xsem_pram_data.offset); + INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->csem_int_table_data.offset); + INIT_CSEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->csem_pram_data.offset); + /* IRO */ + BNX2X_ALLOC_AND_SET(iro_arr, iro_alloc_err, bnx2x_prep_iro); + + return 0; + +iro_alloc_err: + kfree(bp->init_ops_offsets); +init_offsets_alloc_err: + kfree(bp->init_ops); +init_ops_alloc_err: + kfree(bp->init_data); +request_firmware_exit: + release_firmware(bp->firmware); + bp->firmware = NULL; + + return rc; +} + +static void bnx2x_release_firmware(struct bnx2x *bp) +{ + kfree(bp->init_ops_offsets); + kfree(bp->init_ops); + kfree(bp->init_data); + release_firmware(bp->firmware); + bp->firmware = NULL; +} + +static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv = { + .init_hw_cmn_chip = bnx2x_init_hw_common_chip, + .init_hw_cmn = bnx2x_init_hw_common, + .init_hw_port = bnx2x_init_hw_port, + .init_hw_func = bnx2x_init_hw_func, + + .reset_hw_cmn = bnx2x_reset_common, + .reset_hw_port = bnx2x_reset_port, + .reset_hw_func = bnx2x_reset_func, + + .gunzip_init = bnx2x_gunzip_init, + .gunzip_end = bnx2x_gunzip_end, + + .init_fw = bnx2x_init_firmware, + .release_fw = bnx2x_release_firmware, +}; + +void bnx2x__init_func_obj(struct bnx2x *bp) +{ + /* Prepare DMAE related driver resources */ + bnx2x_setup_dmae(bp); + + bnx2x_init_func_obj(bp, &bp->func_obj, + bnx2x_sp(bp, func_rdata), + bnx2x_sp_mapping(bp, func_rdata), + bnx2x_sp(bp, func_afex_rdata), + bnx2x_sp_mapping(bp, func_afex_rdata), + &bnx2x_func_sp_drv); +} + +/* must be called after sriov-enable */ +static int bnx2x_set_qm_cid_count(struct bnx2x *bp) +{ + int cid_count = BNX2X_L2_MAX_CID(bp); + + if (IS_SRIOV(bp)) + cid_count += BNX2X_VF_CIDS; + + if (CNIC_SUPPORT(bp)) + cid_count += CNIC_CID_MAX; + + return roundup(cid_count, QM_CID_ROUND); +} + +/** + * bnx2x_get_num_none_def_sbs - return the number of none default SBs + * + * @dev: pci device + * + */ +static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, int cnic_cnt) +{ + int index; + u16 control = 0; + + /* + * If MSI-X is not supported - return number of SBs needed to support + * one fast path queue: one FP queue + SB for CNIC + */ + if (!pdev->msix_cap) { + dev_info(&pdev->dev, "no msix capability found\n"); + return 1 + cnic_cnt; + } + dev_info(&pdev->dev, "msix capability found\n"); + + /* + * The value in the PCI configuration space is the index of the last + * entry, namely one less than the actual size of the table, which is + * exactly what we want to return from this function: number of all SBs + * without the default SB. + * For VFs there is no default SB, then we return (index+1). + */ + pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &control); + + index = control & PCI_MSIX_FLAGS_QSIZE; + + return index; +} + +static int set_max_cos_est(int chip_id) +{ + switch (chip_id) { + case BCM57710: + case BCM57711: + case BCM57711E: + return BNX2X_MULTI_TX_COS_E1X; + case BCM57712: + case BCM57712_MF: + return BNX2X_MULTI_TX_COS_E2_E3A0; + case BCM57800: + case BCM57800_MF: + case BCM57810: + case BCM57810_MF: + case BCM57840_4_10: + case BCM57840_2_20: + case BCM57840_O: + case BCM57840_MFO: + case BCM57840_MF: + case BCM57811: + case BCM57811_MF: + return BNX2X_MULTI_TX_COS_E3B0; + case BCM57712_VF: + case BCM57800_VF: + case BCM57810_VF: + case BCM57840_VF: + case BCM57811_VF: + return 1; + default: + pr_err("Unknown board_type (%d), aborting\n", chip_id); + return -ENODEV; + } +} + +static int set_is_vf(int chip_id) +{ + switch (chip_id) { + case BCM57712_VF: + case BCM57800_VF: + case BCM57810_VF: + case BCM57840_VF: + case BCM57811_VF: + return true; + default: + return false; + } +} + +/* nig_tsgen registers relative address */ +#define tsgen_ctrl 0x0 +#define tsgen_freecount 0x10 +#define tsgen_synctime_t0 0x20 +#define tsgen_offset_t0 0x28 +#define tsgen_drift_t0 0x30 +#define tsgen_synctime_t1 0x58 +#define tsgen_offset_t1 0x60 +#define tsgen_drift_t1 0x68 + +/* FW workaround for setting drift */ +static int bnx2x_send_update_drift_ramrod(struct bnx2x *bp, int drift_dir, + int best_val, int best_period) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_set_timesync_params *set_timesync_params = + &func_params.params.set_timesync; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC; + + /* Function parameters */ + set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_SET; + set_timesync_params->offset_cmd = TS_OFFSET_KEEP; + set_timesync_params->add_sub_drift_adjust_value = + drift_dir ? TS_ADD_VALUE : TS_SUB_VALUE; + set_timesync_params->drift_adjust_value = best_val; + set_timesync_params->drift_adjust_period = best_period; + + return bnx2x_func_state_change(bp, &func_params); +} + +static int bnx2x_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + int rc; + int drift_dir = 1; + int val, period, period1, period2, dif, dif1, dif2; + int best_dif = BNX2X_MAX_PHC_DRIFT, best_period = 0, best_val = 0; + + DP(BNX2X_MSG_PTP, "PTP adjfreq called, ppb = %d\n", ppb); + + if (!netif_running(bp->dev)) { + DP(BNX2X_MSG_PTP, + "PTP adjfreq called while the interface is down\n"); + return -EFAULT; + } + + if (ppb < 0) { + ppb = -ppb; + drift_dir = 0; + } + + if (ppb == 0) { + best_val = 1; + best_period = 0x1FFFFFF; + } else if (ppb >= BNX2X_MAX_PHC_DRIFT) { + best_val = 31; + best_period = 1; + } else { + /* Changed not to allow val = 8, 16, 24 as these values + * are not supported in workaround. + */ + for (val = 0; val <= 31; val++) { + if ((val & 0x7) == 0) + continue; + period1 = val * 1000000 / ppb; + period2 = period1 + 1; + if (period1 != 0) + dif1 = ppb - (val * 1000000 / period1); + else + dif1 = BNX2X_MAX_PHC_DRIFT; + if (dif1 < 0) + dif1 = -dif1; + dif2 = ppb - (val * 1000000 / period2); + if (dif2 < 0) + dif2 = -dif2; + dif = (dif1 < dif2) ? dif1 : dif2; + period = (dif1 < dif2) ? period1 : period2; + if (dif < best_dif) { + best_dif = dif; + best_val = val; + best_period = period; + } + } + } + + rc = bnx2x_send_update_drift_ramrod(bp, drift_dir, best_val, + best_period); + if (rc) { + BNX2X_ERR("Failed to set drift\n"); + return -EFAULT; + } + + DP(BNX2X_MSG_PTP, "Configured val = %d, period = %d\n", best_val, + best_period); + + return 0; +} + +static int bnx2x_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + + DP(BNX2X_MSG_PTP, "PTP adjtime called, delta = %llx\n", delta); + + timecounter_adjtime(&bp->timecounter, delta); + + return 0; +} + +static int bnx2x_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + u64 ns; + + ns = timecounter_read(&bp->timecounter); + + DP(BNX2X_MSG_PTP, "PTP gettime called, ns = %llu\n", ns); + + *ts = ns_to_timespec64(ns); + + return 0; +} + +static int bnx2x_ptp_settime(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + u64 ns; + + ns = timespec64_to_ns(ts); + + DP(BNX2X_MSG_PTP, "PTP settime called, ns = %llu\n", ns); + + /* Re-init the timecounter */ + timecounter_init(&bp->timecounter, &bp->cyclecounter, ns); + + return 0; +} + +/* Enable (or disable) ancillary features of the phc subsystem */ +static int bnx2x_ptp_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + + BNX2X_ERR("PHC ancillary features are not supported\n"); + return -ENOTSUPP; +} + +static void bnx2x_register_phc(struct bnx2x *bp) +{ + /* Fill the ptp_clock_info struct and register PTP clock*/ + bp->ptp_clock_info.owner = THIS_MODULE; + snprintf(bp->ptp_clock_info.name, 16, "%s", bp->dev->name); + bp->ptp_clock_info.max_adj = BNX2X_MAX_PHC_DRIFT; /* In PPB */ + bp->ptp_clock_info.n_alarm = 0; + bp->ptp_clock_info.n_ext_ts = 0; + bp->ptp_clock_info.n_per_out = 0; + bp->ptp_clock_info.pps = 0; + bp->ptp_clock_info.adjfreq = bnx2x_ptp_adjfreq; + bp->ptp_clock_info.adjtime = bnx2x_ptp_adjtime; + bp->ptp_clock_info.gettime64 = bnx2x_ptp_gettime; + bp->ptp_clock_info.settime64 = bnx2x_ptp_settime; + bp->ptp_clock_info.enable = bnx2x_ptp_enable; + + bp->ptp_clock = ptp_clock_register(&bp->ptp_clock_info, &bp->pdev->dev); + if (IS_ERR(bp->ptp_clock)) { + bp->ptp_clock = NULL; + BNX2X_ERR("PTP clock registeration failed\n"); + } +} + +static int bnx2x_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev = NULL; + struct bnx2x *bp; + enum pcie_link_width pcie_width; + enum pci_bus_speed pcie_speed; + int rc, max_non_def_sbs; + int rx_count, tx_count, rss_count, doorbell_size; + int max_cos_est; + bool is_vf; + int cnic_cnt; + + /* Management FW 'remembers' living interfaces. Allow it some time + * to forget previously living interfaces, allowing a proper re-load. + */ + if (is_kdump_kernel()) { + ktime_t now = ktime_get_boottime(); + ktime_t fw_ready_time = ktime_set(5, 0); + + if (ktime_before(now, fw_ready_time)) + msleep(ktime_ms_delta(fw_ready_time, now)); + } + + /* An estimated maximum supported CoS number according to the chip + * version. + * We will try to roughly estimate the maximum number of CoSes this chip + * may support in order to minimize the memory allocated for Tx + * netdev_queue's. This number will be accurately calculated during the + * initialization of bp->max_cos based on the chip versions AND chip + * revision in the bnx2x_init_bp(). + */ + max_cos_est = set_max_cos_est(ent->driver_data); + if (max_cos_est < 0) + return max_cos_est; + is_vf = set_is_vf(ent->driver_data); + cnic_cnt = is_vf ? 0 : 1; + + max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt); + + /* add another SB for VF as it has no default SB */ + max_non_def_sbs += is_vf ? 1 : 0; + + /* Maximum number of RSS queues: one IGU SB goes to CNIC */ + rss_count = max_non_def_sbs - cnic_cnt; + + if (rss_count < 1) + return -EINVAL; + + /* Maximum number of netdev Rx queues: RSS + FCoE L2 */ + rx_count = rss_count + cnic_cnt; + + /* Maximum number of netdev Tx queues: + * Maximum TSS queues * Maximum supported number of CoS + FCoE L2 + */ + tx_count = rss_count * max_cos_est + cnic_cnt; + + /* dev zeroed in init_etherdev */ + dev = alloc_etherdev_mqs(sizeof(*bp), tx_count, rx_count); + if (!dev) + return -ENOMEM; + + bp = netdev_priv(dev); + + bp->flags = 0; + if (is_vf) + bp->flags |= IS_VF_FLAG; + + bp->igu_sb_cnt = max_non_def_sbs; + bp->igu_base_addr = IS_VF(bp) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM; + bp->msg_enable = debug; + bp->cnic_support = cnic_cnt; + bp->cnic_probe = bnx2x_cnic_probe; + + pci_set_drvdata(pdev, dev); + + rc = bnx2x_init_dev(bp, pdev, dev, ent->driver_data); + if (rc < 0) { + free_netdev(dev); + return rc; + } + + BNX2X_DEV_INFO("This is a %s function\n", + IS_PF(bp) ? "physical" : "virtual"); + BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp) ? "on" : "off"); + BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs); + BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n", + tx_count, rx_count); + + rc = bnx2x_init_bp(bp); + if (rc) + goto init_one_exit; + + /* Map doorbells here as we need the real value of bp->max_cos which + * is initialized in bnx2x_init_bp() to determine the number of + * l2 connections. + */ + if (IS_VF(bp)) { + bp->doorbells = bnx2x_vf_doorbells(bp); + rc = bnx2x_vf_pci_alloc(bp); + if (rc) + goto init_one_exit; + } else { + doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT); + if (doorbell_size > pci_resource_len(pdev, 2)) { + dev_err(&bp->pdev->dev, + "Cannot map doorbells, bar size too small, aborting\n"); + rc = -ENOMEM; + goto init_one_exit; + } + bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2), + doorbell_size); + } + if (!bp->doorbells) { + dev_err(&bp->pdev->dev, + "Cannot map doorbell space, aborting\n"); + rc = -ENOMEM; + goto init_one_exit; + } + + if (IS_VF(bp)) { + rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count); + if (rc) + goto init_one_exit; + } + + /* Enable SRIOV if capability found in configuration space */ + rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS); + if (rc) + goto init_one_exit; + + /* calc qm_cid_count */ + bp->qm_cid_count = bnx2x_set_qm_cid_count(bp); + BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count); + + /* disable FCOE L2 queue for E1x*/ + if (CHIP_IS_E1x(bp)) + bp->flags |= NO_FCOE_FLAG; + + /* Set bp->num_queues for MSI-X mode*/ + bnx2x_set_num_queues(bp); + + /* Configure interrupt mode: try to enable MSI-X/MSI if + * needed. + */ + rc = bnx2x_set_int_mode(bp); + if (rc) { + dev_err(&pdev->dev, "Cannot set interrupts\n"); + goto init_one_exit; + } + BNX2X_DEV_INFO("set interrupts successfully\n"); + + /* register the net device */ + rc = register_netdev(dev); + if (rc) { + dev_err(&pdev->dev, "Cannot register net device\n"); + goto init_one_exit; + } + BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name); + + if (!NO_FCOE(bp)) { + /* Add storage MAC address */ + rtnl_lock(); + dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN); + rtnl_unlock(); + } + if (pcie_get_minimum_link(bp->pdev, &pcie_speed, &pcie_width) || + pcie_speed == PCI_SPEED_UNKNOWN || + pcie_width == PCIE_LNK_WIDTH_UNKNOWN) + BNX2X_DEV_INFO("Failed to determine PCI Express Bandwidth\n"); + else + BNX2X_DEV_INFO( + "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n", + board_info[ent->driver_data].name, + (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4), + pcie_width, + pcie_speed == PCIE_SPEED_2_5GT ? "2.5GHz" : + pcie_speed == PCIE_SPEED_5_0GT ? "5.0GHz" : + pcie_speed == PCIE_SPEED_8_0GT ? "8.0GHz" : + "Unknown", + dev->base_addr, bp->pdev->irq, dev->dev_addr); + + bnx2x_register_phc(bp); + + return 0; + +init_one_exit: + bnx2x_disable_pcie_error_reporting(bp); + + if (bp->regview) + iounmap(bp->regview); + + if (IS_PF(bp) && bp->doorbells) + iounmap(bp->doorbells); + + free_netdev(dev); + + if (atomic_read(&pdev->enable_cnt) == 1) + pci_release_regions(pdev); + + pci_disable_device(pdev); + + return rc; +} + +static void __bnx2x_remove(struct pci_dev *pdev, + struct net_device *dev, + struct bnx2x *bp, + bool remove_netdev) +{ + if (bp->ptp_clock) { + ptp_clock_unregister(bp->ptp_clock); + bp->ptp_clock = NULL; + } + + /* Delete storage MAC address */ + if (!NO_FCOE(bp)) { + rtnl_lock(); + dev_addr_del(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN); + rtnl_unlock(); + } + +#ifdef BCM_DCBNL + /* Delete app tlvs from dcbnl */ + bnx2x_dcbnl_update_applist(bp, true); +#endif + + if (IS_PF(bp) && + !BP_NOMCP(bp) && + (bp->flags & BC_SUPPORTS_RMMOD_CMD)) + bnx2x_fw_command(bp, DRV_MSG_CODE_RMMOD, 0); + + /* Close the interface - either directly or implicitly */ + if (remove_netdev) { + unregister_netdev(dev); + } else { + rtnl_lock(); + dev_close(dev); + rtnl_unlock(); + } + + bnx2x_iov_remove_one(bp); + + /* Power on: we can't let PCI layer write to us while we are in D3 */ + if (IS_PF(bp)) { + bnx2x_set_power_state(bp, PCI_D0); + + /* Set endianity registers to reset values in case next driver + * boots in different endianty environment. + */ + bnx2x_reset_endianity(bp); + } + + /* Disable MSI/MSI-X */ + bnx2x_disable_msi(bp); + + /* Power off */ + if (IS_PF(bp)) + bnx2x_set_power_state(bp, PCI_D3hot); + + /* Make sure RESET task is not scheduled before continuing */ + cancel_delayed_work_sync(&bp->sp_rtnl_task); + + /* send message via vfpf channel to release the resources of this vf */ + if (IS_VF(bp)) + bnx2x_vfpf_release(bp); + + /* Assumes no further PCIe PM changes will occur */ + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, bp->wol); + pci_set_power_state(pdev, PCI_D3hot); + } + + bnx2x_disable_pcie_error_reporting(bp); + if (remove_netdev) { + if (bp->regview) + iounmap(bp->regview); + + /* For vfs, doorbells are part of the regview and were unmapped + * along with it. FW is only loaded by PF. + */ + if (IS_PF(bp)) { + if (bp->doorbells) + iounmap(bp->doorbells); + + bnx2x_release_firmware(bp); + } else { + bnx2x_vf_pci_dealloc(bp); + } + bnx2x_free_mem_bp(bp); + + free_netdev(dev); + + if (atomic_read(&pdev->enable_cnt) == 1) + pci_release_regions(pdev); + + pci_disable_device(pdev); + } +} + +static void bnx2x_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp; + + if (!dev) { + dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n"); + return; + } + bp = netdev_priv(dev); + + __bnx2x_remove(pdev, dev, bp, true); +} + +static int bnx2x_eeh_nic_unload(struct bnx2x *bp) +{ + bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; + + bp->rx_mode = BNX2X_RX_MODE_NONE; + + if (CNIC_LOADED(bp)) + bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD); + + /* Stop Tx */ + bnx2x_tx_disable(bp); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); + if (CNIC_LOADED(bp)) + bnx2x_del_all_napi_cnic(bp); + netdev_reset_tc(bp->dev); + + del_timer_sync(&bp->timer); + cancel_delayed_work_sync(&bp->sp_task); + cancel_delayed_work_sync(&bp->period_task); + + if (!down_timeout(&bp->stats_lock, HZ / 10)) { + bp->stats_state = STATS_STATE_DISABLED; + up(&bp->stats_lock); + } + + bnx2x_save_statistics(bp); + + netif_carrier_off(bp->dev); + + return 0; +} + +/** + * bnx2x_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + + rtnl_lock(); + + BNX2X_ERR("IO error detected\n"); + + netif_device_detach(dev); + + if (state == pci_channel_io_perm_failure) { + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } + + if (netif_running(dev)) + bnx2x_eeh_nic_unload(bp); + + bnx2x_prev_path_mark_eeh(bp); + + pci_disable_device(pdev); + + rtnl_unlock(); + + /* Request a slot reset */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * bnx2x_io_slot_reset - called after the PCI bus has been reset + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + int i; + + rtnl_lock(); + BNX2X_ERR("IO slot reset initializing...\n"); + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset\n"); + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + pci_restore_state(pdev); + pci_save_state(pdev); + + if (netif_running(dev)) + bnx2x_set_power_state(bp, PCI_D0); + + if (netif_running(dev)) { + BNX2X_ERR("IO slot reset --> driver unload\n"); + + /* MCP should have been reset; Need to wait for validity */ + bnx2x_init_shmem(bp); + + if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { + u32 v; + + v = SHMEM2_RD(bp, + drv_capabilities_flag[BP_FW_MB_IDX(bp)]); + SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)], + v & ~DRV_FLAGS_CAPABILITIES_LOADED_L2); + } + bnx2x_drain_tx_queues(bp); + bnx2x_send_unload_req(bp, UNLOAD_RECOVERY); + bnx2x_netif_stop(bp, 1); + bnx2x_free_irq(bp); + + /* Report UNLOAD_DONE to MCP */ + bnx2x_send_unload_done(bp, true); + + bp->sp_state = 0; + bp->port.pmf = 0; + + bnx2x_prev_unload(bp); + + /* We should have reseted the engine, so It's fair to + * assume the FW will no longer write to the bnx2x driver. + */ + bnx2x_squeeze_objects(bp); + bnx2x_free_skbs(bp); + for_each_rx_queue(bp, i) + bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + bnx2x_free_fp_mem(bp); + bnx2x_free_mem(bp); + + bp->state = BNX2X_STATE_CLOSED; + } + + rtnl_unlock(); + + /* If AER, perform cleanup of the PCIe registers */ + if (bp->flags & AER_ENABLED) { + if (pci_cleanup_aer_uncorrect_error_status(pdev)) + BNX2X_ERR("pci_cleanup_aer_uncorrect_error_status failed\n"); + else + DP(NETIF_MSG_HW, "pci_cleanup_aer_uncorrect_error_status succeeded\n"); + } + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * bnx2x_io_resume - called when traffic can start flowing again + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void bnx2x_io_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + netdev_err(bp->dev, "Handling parity error recovery. Try again later\n"); + return; + } + + rtnl_lock(); + + bp->fw_seq = SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK; + + if (netif_running(dev)) + bnx2x_nic_load(bp, LOAD_NORMAL); + + netif_device_attach(dev); + + rtnl_unlock(); +} + +static const struct pci_error_handlers bnx2x_err_handler = { + .error_detected = bnx2x_io_error_detected, + .slot_reset = bnx2x_io_slot_reset, + .resume = bnx2x_io_resume, +}; + +static void bnx2x_shutdown(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp; + + if (!dev) + return; + + bp = netdev_priv(dev); + if (!bp) + return; + + rtnl_lock(); + netif_device_detach(dev); + rtnl_unlock(); + + /* Don't remove the netdevice, as there are scenarios which will cause + * the kernel to hang, e.g., when trying to remove bnx2i while the + * rootfs is mounted from SAN. + */ + __bnx2x_remove(pdev, dev, bp, false); +} + +static struct pci_driver bnx2x_pci_driver = { + .name = DRV_MODULE_NAME, + .id_table = bnx2x_pci_tbl, + .probe = bnx2x_init_one, + .remove = bnx2x_remove_one, + .suspend = bnx2x_suspend, + .resume = bnx2x_resume, + .err_handler = &bnx2x_err_handler, +#ifdef CONFIG_BNX2X_SRIOV + .sriov_configure = bnx2x_sriov_configure, +#endif + .shutdown = bnx2x_shutdown, +}; + +static int __init bnx2x_init(void) +{ + int ret; + + pr_info("%s", version); + + bnx2x_wq = create_singlethread_workqueue("bnx2x"); + if (bnx2x_wq == NULL) { + pr_err("Cannot create workqueue\n"); + return -ENOMEM; + } + bnx2x_iov_wq = create_singlethread_workqueue("bnx2x_iov"); + if (!bnx2x_iov_wq) { + pr_err("Cannot create iov workqueue\n"); + destroy_workqueue(bnx2x_wq); + return -ENOMEM; + } + + ret = pci_register_driver(&bnx2x_pci_driver); + if (ret) { + pr_err("Cannot register driver\n"); + destroy_workqueue(bnx2x_wq); + destroy_workqueue(bnx2x_iov_wq); + } + return ret; +} + +static void __exit bnx2x_cleanup(void) +{ + struct list_head *pos, *q; + + pci_unregister_driver(&bnx2x_pci_driver); + + destroy_workqueue(bnx2x_wq); + destroy_workqueue(bnx2x_iov_wq); + + /* Free globally allocated resources */ + list_for_each_safe(pos, q, &bnx2x_prev_list) { + struct bnx2x_prev_path_list *tmp = + list_entry(pos, struct bnx2x_prev_path_list, list); + list_del(pos); + kfree(tmp); + } +} + +void bnx2x_notify_link_changed(struct bnx2x *bp) +{ + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + BP_FUNC(bp)*sizeof(u32), 1); +} + +module_init(bnx2x_init); +module_exit(bnx2x_cleanup); + +/** + * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s). + * + * @bp: driver handle + * @set: set or clear the CAM entry + * + * This function will wait until the ramrod completion returns. + * Return 0 if success, -ENODEV if ramrod doesn't return. + */ +static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp) +{ + unsigned long ramrod_flags = 0; + + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + return bnx2x_set_mac_one(bp, bp->cnic_eth_dev.iscsi_mac, + &bp->iscsi_l2_mac_obj, true, + BNX2X_ISCSI_ETH_MAC, &ramrod_flags); +} + +/* count denotes the number of new completions we have seen */ +static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count) +{ + struct eth_spe *spe; + int cxt_index, cxt_offset; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return; +#endif + + spin_lock_bh(&bp->spq_lock); + BUG_ON(bp->cnic_spq_pending < count); + bp->cnic_spq_pending -= count; + + for (; bp->cnic_kwq_pending; bp->cnic_kwq_pending--) { + u16 type = (le16_to_cpu(bp->cnic_kwq_cons->hdr.type) + & SPE_HDR_CONN_TYPE) >> + SPE_HDR_CONN_TYPE_SHIFT; + u8 cmd = (le32_to_cpu(bp->cnic_kwq_cons->hdr.conn_and_cmd_data) + >> SPE_HDR_CMD_ID_SHIFT) & 0xff; + + /* Set validation for iSCSI L2 client before sending SETUP + * ramrod + */ + if (type == ETH_CONNECTION_TYPE) { + if (cmd == RAMROD_CMD_ID_ETH_CLIENT_SETUP) { + cxt_index = BNX2X_ISCSI_ETH_CID(bp) / + ILT_PAGE_CIDS; + cxt_offset = BNX2X_ISCSI_ETH_CID(bp) - + (cxt_index * ILT_PAGE_CIDS); + bnx2x_set_ctx_validation(bp, + &bp->context[cxt_index]. + vcxt[cxt_offset].eth, + BNX2X_ISCSI_ETH_CID(bp)); + } + } + + /* + * There may be not more than 8 L2, not more than 8 L5 SPEs + * and in the air. We also check that number of outstanding + * COMMON ramrods is not more than the EQ and SPQ can + * accommodate. + */ + if (type == ETH_CONNECTION_TYPE) { + if (!atomic_read(&bp->cq_spq_left)) + break; + else + atomic_dec(&bp->cq_spq_left); + } else if (type == NONE_CONNECTION_TYPE) { + if (!atomic_read(&bp->eq_spq_left)) + break; + else + atomic_dec(&bp->eq_spq_left); + } else if ((type == ISCSI_CONNECTION_TYPE) || + (type == FCOE_CONNECTION_TYPE)) { + if (bp->cnic_spq_pending >= + bp->cnic_eth_dev.max_kwqe_pending) + break; + else + bp->cnic_spq_pending++; + } else { + BNX2X_ERR("Unknown SPE type: %d\n", type); + bnx2x_panic(); + break; + } + + spe = bnx2x_sp_get_next(bp); + *spe = *bp->cnic_kwq_cons; + + DP(BNX2X_MSG_SP, "pending on SPQ %d, on KWQ %d count %d\n", + bp->cnic_spq_pending, bp->cnic_kwq_pending, count); + + if (bp->cnic_kwq_cons == bp->cnic_kwq_last) + bp->cnic_kwq_cons = bp->cnic_kwq; + else + bp->cnic_kwq_cons++; + } + bnx2x_sp_prod_update(bp); + spin_unlock_bh(&bp->spq_lock); +} + +static int bnx2x_cnic_sp_queue(struct net_device *dev, + struct kwqe_16 *kwqes[], u32 count) +{ + struct bnx2x *bp = netdev_priv(dev); + int i; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) { + BNX2X_ERR("Can't post to SP queue while panic\n"); + return -EIO; + } +#endif + + if ((bp->recovery_state != BNX2X_RECOVERY_DONE) && + (bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) { + BNX2X_ERR("Handling parity error recovery. Try again later\n"); + return -EAGAIN; + } + + spin_lock_bh(&bp->spq_lock); + + for (i = 0; i < count; i++) { + struct eth_spe *spe = (struct eth_spe *)kwqes[i]; + + if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT) + break; + + *bp->cnic_kwq_prod = *spe; + + bp->cnic_kwq_pending++; + + DP(BNX2X_MSG_SP, "L5 SPQE %x %x %x:%x pos %d\n", + spe->hdr.conn_and_cmd_data, spe->hdr.type, + spe->data.update_data_addr.hi, + spe->data.update_data_addr.lo, + bp->cnic_kwq_pending); + + if (bp->cnic_kwq_prod == bp->cnic_kwq_last) + bp->cnic_kwq_prod = bp->cnic_kwq; + else + bp->cnic_kwq_prod++; + } + + spin_unlock_bh(&bp->spq_lock); + + if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending) + bnx2x_cnic_sp_post(bp, 0); + + return i; +} + +static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl) +{ + struct cnic_ops *c_ops; + int rc = 0; + + mutex_lock(&bp->cnic_mutex); + c_ops = rcu_dereference_protected(bp->cnic_ops, + lockdep_is_held(&bp->cnic_mutex)); + if (c_ops) + rc = c_ops->cnic_ctl(bp->cnic_data, ctl); + mutex_unlock(&bp->cnic_mutex); + + return rc; +} + +static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl) +{ + struct cnic_ops *c_ops; + int rc = 0; + + rcu_read_lock(); + c_ops = rcu_dereference(bp->cnic_ops); + if (c_ops) + rc = c_ops->cnic_ctl(bp->cnic_data, ctl); + rcu_read_unlock(); + + return rc; +} + +/* + * for commands that have no data + */ +int bnx2x_cnic_notify(struct bnx2x *bp, int cmd) +{ + struct cnic_ctl_info ctl = {0}; + + ctl.cmd = cmd; + + return bnx2x_cnic_ctl_send(bp, &ctl); +} + +static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err) +{ + struct cnic_ctl_info ctl = {0}; + + /* first we tell CNIC and only then we count this as a completion */ + ctl.cmd = CNIC_CTL_COMPLETION_CMD; + ctl.data.comp.cid = cid; + ctl.data.comp.error = err; + + bnx2x_cnic_ctl_send_bh(bp, &ctl); + bnx2x_cnic_sp_post(bp, 0); +} + +/* Called with netif_addr_lock_bh() taken. + * Sets an rx_mode config for an iSCSI ETH client. + * Doesn't block. + * Completion should be checked outside. + */ +static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start) +{ + unsigned long accept_flags = 0, ramrod_flags = 0; + u8 cl_id = bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX); + int sched_state = BNX2X_FILTER_ISCSI_ETH_STOP_SCHED; + + if (start) { + /* Start accepting on iSCSI L2 ring. Accept all multicasts + * because it's the only way for UIO Queue to accept + * multicasts (in non-promiscuous mode only one Queue per + * function will receive multicast packets (leading in our + * case). + */ + __set_bit(BNX2X_ACCEPT_UNICAST, &accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, &accept_flags); + __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags); + + /* Clear STOP_PENDING bit if START is requested */ + clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &bp->sp_state); + + sched_state = BNX2X_FILTER_ISCSI_ETH_START_SCHED; + } else + /* Clear START_PENDING bit if STOP is requested */ + clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &bp->sp_state); + + if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) + set_bit(sched_state, &bp->sp_state); + else { + __set_bit(RAMROD_RX, &ramrod_flags); + bnx2x_set_q_rx_mode(bp, cl_id, 0, accept_flags, 0, + ramrod_flags); + } +} + +static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl) +{ + struct bnx2x *bp = netdev_priv(dev); + int rc = 0; + + switch (ctl->cmd) { + case DRV_CTL_CTXTBL_WR_CMD: { + u32 index = ctl->data.io.offset; + dma_addr_t addr = ctl->data.io.dma_addr; + + bnx2x_ilt_wr(bp, index, addr); + break; + } + + case DRV_CTL_RET_L5_SPQ_CREDIT_CMD: { + int count = ctl->data.credit.credit_count; + + bnx2x_cnic_sp_post(bp, count); + break; + } + + /* rtnl_lock is held. */ + case DRV_CTL_START_L2_CMD: { + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + unsigned long sp_bits = 0; + + /* Configure the iSCSI classification object */ + bnx2x_init_mac_obj(bp, &bp->iscsi_l2_mac_obj, + cp->iscsi_l2_client_id, + cp->iscsi_l2_cid, BP_FUNC(bp), + bnx2x_sp(bp, mac_rdata), + bnx2x_sp_mapping(bp, mac_rdata), + BNX2X_FILTER_MAC_PENDING, + &bp->sp_state, BNX2X_OBJ_TYPE_RX, + &bp->macs_pool); + + /* Set iSCSI MAC address */ + rc = bnx2x_set_iscsi_eth_mac_addr(bp); + if (rc) + break; + + mmiowb(); + barrier(); + + /* Start accepting on iSCSI L2 ring */ + + netif_addr_lock_bh(dev); + bnx2x_set_iscsi_eth_rx_mode(bp, true); + netif_addr_unlock_bh(dev); + + /* bits to wait on */ + __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits); + __set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &sp_bits); + + if (!bnx2x_wait_sp_comp(bp, sp_bits)) + BNX2X_ERR("rx_mode completion timed out!\n"); + + break; + } + + /* rtnl_lock is held. */ + case DRV_CTL_STOP_L2_CMD: { + unsigned long sp_bits = 0; + + /* Stop accepting on iSCSI L2 ring */ + netif_addr_lock_bh(dev); + bnx2x_set_iscsi_eth_rx_mode(bp, false); + netif_addr_unlock_bh(dev); + + /* bits to wait on */ + __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits); + __set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &sp_bits); + + if (!bnx2x_wait_sp_comp(bp, sp_bits)) + BNX2X_ERR("rx_mode completion timed out!\n"); + + mmiowb(); + barrier(); + + /* Unset iSCSI L2 MAC */ + rc = bnx2x_del_all_macs(bp, &bp->iscsi_l2_mac_obj, + BNX2X_ISCSI_ETH_MAC, true); + break; + } + case DRV_CTL_RET_L2_SPQ_CREDIT_CMD: { + int count = ctl->data.credit.credit_count; + + smp_mb__before_atomic(); + atomic_add(count, &bp->cq_spq_left); + smp_mb__after_atomic(); + break; + } + case DRV_CTL_ULP_REGISTER_CMD: { + int ulp_type = ctl->data.register_data.ulp_type; + + if (CHIP_IS_E3(bp)) { + int idx = BP_FW_MB_IDX(bp); + u32 cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]); + int path = BP_PATH(bp); + int port = BP_PORT(bp); + int i; + u32 scratch_offset; + u32 *host_addr; + + /* first write capability to shmem2 */ + if (ulp_type == CNIC_ULP_ISCSI) + cap |= DRV_FLAGS_CAPABILITIES_LOADED_ISCSI; + else if (ulp_type == CNIC_ULP_FCOE) + cap |= DRV_FLAGS_CAPABILITIES_LOADED_FCOE; + SHMEM2_WR(bp, drv_capabilities_flag[idx], cap); + + if ((ulp_type != CNIC_ULP_FCOE) || + (!SHMEM2_HAS(bp, ncsi_oem_data_addr)) || + (!(bp->flags & BC_SUPPORTS_FCOE_FEATURES))) + break; + + /* if reached here - should write fcoe capabilities */ + scratch_offset = SHMEM2_RD(bp, ncsi_oem_data_addr); + if (!scratch_offset) + break; + scratch_offset += offsetof(struct glob_ncsi_oem_data, + fcoe_features[path][port]); + host_addr = (u32 *) &(ctl->data.register_data. + fcoe_features); + for (i = 0; i < sizeof(struct fcoe_capabilities); + i += 4) + REG_WR(bp, scratch_offset + i, + *(host_addr + i/4)); + } + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); + break; + } + + case DRV_CTL_ULP_UNREGISTER_CMD: { + int ulp_type = ctl->data.ulp_type; + + if (CHIP_IS_E3(bp)) { + int idx = BP_FW_MB_IDX(bp); + u32 cap; + + cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]); + if (ulp_type == CNIC_ULP_ISCSI) + cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_ISCSI; + else if (ulp_type == CNIC_ULP_FCOE) + cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_FCOE; + SHMEM2_WR(bp, drv_capabilities_flag[idx], cap); + } + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); + break; + } + + default: + BNX2X_ERR("unknown command %x\n", ctl->cmd); + rc = -EINVAL; + } + + return rc; +} + +void bnx2x_setup_cnic_irq_info(struct bnx2x *bp) +{ + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + if (bp->flags & USING_MSIX_FLAG) { + cp->drv_state |= CNIC_DRV_STATE_USING_MSIX; + cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX; + cp->irq_arr[0].vector = bp->msix_table[1].vector; + } else { + cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX; + cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX; + } + if (!CHIP_IS_E1x(bp)) + cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e2_sb; + else + cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e1x_sb; + + cp->irq_arr[0].status_blk_num = bnx2x_cnic_fw_sb_id(bp); + cp->irq_arr[0].status_blk_num2 = bnx2x_cnic_igu_sb_id(bp); + cp->irq_arr[1].status_blk = bp->def_status_blk; + cp->irq_arr[1].status_blk_num = DEF_SB_ID; + cp->irq_arr[1].status_blk_num2 = DEF_SB_IGU_ID; + + cp->num_irq = 2; +} + +void bnx2x_setup_cnic_info(struct bnx2x *bp) +{ + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + + bnx2x_cid_ilt_lines(bp); + cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS; + cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp); + cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp); + + DP(NETIF_MSG_IFUP, "BNX2X_1st_NON_L2_ETH_CID(bp) %x, cp->starting_cid %x, cp->fcoe_init_cid %x, cp->iscsi_l2_cid %x\n", + BNX2X_1st_NON_L2_ETH_CID(bp), cp->starting_cid, cp->fcoe_init_cid, + cp->iscsi_l2_cid); + + if (NO_ISCSI_OOO(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO; +} + +static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops, + void *data) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + int rc; + + DP(NETIF_MSG_IFUP, "Register_cnic called\n"); + + if (ops == NULL) { + BNX2X_ERR("NULL ops received\n"); + return -EINVAL; + } + + if (!CNIC_SUPPORT(bp)) { + BNX2X_ERR("Can't register CNIC when not supported\n"); + return -EOPNOTSUPP; + } + + if (!CNIC_LOADED(bp)) { + rc = bnx2x_load_cnic(bp); + if (rc) { + BNX2X_ERR("CNIC-related load failed\n"); + return rc; + } + } + + bp->cnic_enabled = true; + + bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!bp->cnic_kwq) + return -ENOMEM; + + bp->cnic_kwq_cons = bp->cnic_kwq; + bp->cnic_kwq_prod = bp->cnic_kwq; + bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT; + + bp->cnic_spq_pending = 0; + bp->cnic_kwq_pending = 0; + + bp->cnic_data = data; + + cp->num_irq = 0; + cp->drv_state |= CNIC_DRV_STATE_REGD; + cp->iro_arr = bp->iro_arr; + + bnx2x_setup_cnic_irq_info(bp); + + rcu_assign_pointer(bp->cnic_ops, ops); + + /* Schedule driver to read CNIC driver versions */ + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); + + return 0; +} + +static int bnx2x_unregister_cnic(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + mutex_lock(&bp->cnic_mutex); + cp->drv_state = 0; + RCU_INIT_POINTER(bp->cnic_ops, NULL); + mutex_unlock(&bp->cnic_mutex); + synchronize_rcu(); + bp->cnic_enabled = false; + kfree(bp->cnic_kwq); + bp->cnic_kwq = NULL; + + return 0; +} + +static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + /* If both iSCSI and FCoE are disabled - return NULL in + * order to indicate CNIC that it should not try to work + * with this device. + */ + if (NO_ISCSI(bp) && NO_FCOE(bp)) + return NULL; + + cp->drv_owner = THIS_MODULE; + cp->chip_id = CHIP_ID(bp); + cp->pdev = bp->pdev; + cp->io_base = bp->regview; + cp->io_base2 = bp->doorbells; + cp->max_kwqe_pending = 8; + cp->ctx_blk_size = CDU_ILT_PAGE_SZ; + cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + + bnx2x_cid_ilt_lines(bp); + cp->ctx_tbl_len = CNIC_ILT_LINES; + cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS; + cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue; + cp->drv_ctl = bnx2x_drv_ctl; + cp->drv_register_cnic = bnx2x_register_cnic; + cp->drv_unregister_cnic = bnx2x_unregister_cnic; + cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp); + cp->iscsi_l2_client_id = + bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX); + cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp); + + if (NO_ISCSI_OOO(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO; + + if (NO_ISCSI(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI; + + if (NO_FCOE(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_FCOE; + + BNX2X_DEV_INFO( + "page_size %d, tbl_offset %d, tbl_lines %d, starting cid %d\n", + cp->ctx_blk_size, + cp->ctx_tbl_offset, + cp->ctx_tbl_len, + cp->starting_cid); + return cp; +} + +static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp) +{ + struct bnx2x *bp = fp->bp; + u32 offset = BAR_USTRORM_INTMEM; + + if (IS_VF(bp)) + return bnx2x_vf_ustorm_prods_offset(bp, fp); + else if (!CHIP_IS_E1x(bp)) + offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id); + else + offset += USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id); + + return offset; +} + +/* called only on E1H or E2. + * When pretending to be PF, the pretend value is the function number 0...7 + * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID + * combination + */ +int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val) +{ + u32 pretend_reg; + + if (CHIP_IS_E1H(bp) && pretend_func_val >= E1H_FUNC_MAX) + return -1; + + /* get my own pretend register */ + pretend_reg = bnx2x_get_pretend_reg(bp); + REG_WR(bp, pretend_reg, pretend_func_val); + REG_RD(bp, pretend_reg); + return 0; +} + +static void bnx2x_ptp_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, ptp_task); + int port = BP_PORT(bp); + u32 val_seq; + u64 timestamp, ns; + struct skb_shared_hwtstamps shhwtstamps; + + /* Read Tx timestamp registers */ + val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : + NIG_REG_P0_TLLH_PTP_BUF_SEQID); + if (val_seq & 0x10000) { + /* There is a valid timestamp value */ + timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB : + NIG_REG_P0_TLLH_PTP_BUF_TS_MSB); + timestamp <<= 32; + timestamp |= REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_LSB : + NIG_REG_P0_TLLH_PTP_BUF_TS_LSB); + /* Reset timestamp register to allow new timestamp */ + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : + NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000); + ns = timecounter_cyc2time(&bp->timecounter, timestamp); + + memset(&shhwtstamps, 0, sizeof(shhwtstamps)); + shhwtstamps.hwtstamp = ns_to_ktime(ns); + skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps); + dev_kfree_skb_any(bp->ptp_tx_skb); + bp->ptp_tx_skb = NULL; + + DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n", + timestamp, ns); + } else { + DP(BNX2X_MSG_PTP, "There is no valid Tx timestamp yet\n"); + /* Reschedule to keep checking for a valid timestamp value */ + schedule_work(&bp->ptp_task); + } +} + +void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb) +{ + int port = BP_PORT(bp); + u64 timestamp, ns; + + timestamp = REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB : + NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB); + timestamp <<= 32; + timestamp |= REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB : + NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB); + + /* Reset timestamp register to allow new timestamp */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID : + NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000); + + ns = timecounter_cyc2time(&bp->timecounter, timestamp); + + skb_hwtstamps(skb)->hwtstamp = ns_to_ktime(ns); + + DP(BNX2X_MSG_PTP, "Rx timestamp, timestamp cycles = %llu, ns = %llu\n", + timestamp, ns); +} + +/* Read the PHC */ +static cycle_t bnx2x_cyclecounter_read(const struct cyclecounter *cc) +{ + struct bnx2x *bp = container_of(cc, struct bnx2x, cyclecounter); + int port = BP_PORT(bp); + u32 wb_data[2]; + u64 phc_cycles; + + REG_RD_DMAE(bp, port ? NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t1 : + NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t0, wb_data, 2); + phc_cycles = wb_data[1]; + phc_cycles = (phc_cycles << 32) + wb_data[0]; + + DP(BNX2X_MSG_PTP, "PHC read cycles = %llu\n", phc_cycles); + + return phc_cycles; +} + +static void bnx2x_init_cyclecounter(struct bnx2x *bp) +{ + memset(&bp->cyclecounter, 0, sizeof(bp->cyclecounter)); + bp->cyclecounter.read = bnx2x_cyclecounter_read; + bp->cyclecounter.mask = CYCLECOUNTER_MASK(64); + bp->cyclecounter.shift = 1; + bp->cyclecounter.mult = 1; +} + +static int bnx2x_send_reset_timesync_ramrod(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_set_timesync_params *set_timesync_params = + &func_params.params.set_timesync; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC; + + /* Function parameters */ + set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_RESET; + set_timesync_params->offset_cmd = TS_OFFSET_KEEP; + + return bnx2x_func_state_change(bp, &func_params); +} + +static int bnx2x_enable_ptp_packets(struct bnx2x *bp) +{ + struct bnx2x_queue_state_params q_params; + int rc, i; + + /* send queue update ramrod to enable PTP packets */ + memset(&q_params, 0, sizeof(q_params)); + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + q_params.cmd = BNX2X_Q_CMD_UPDATE; + __set_bit(BNX2X_Q_UPDATE_PTP_PKTS_CHNG, + &q_params.params.update.update_flags); + __set_bit(BNX2X_Q_UPDATE_PTP_PKTS, + &q_params.params.update.update_flags); + + /* send the ramrod on all the queues of the PF */ + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + /* Set the appropriate Queue object */ + q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + + /* Update the Queue state */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Failed to enable PTP packets\n"); + return rc; + } + } + + return 0; +} + +int bnx2x_configure_ptp_filters(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int rc; + + if (!bp->hwtstamp_ioctl_called) + return 0; + + switch (bp->tx_type) { + case HWTSTAMP_TX_ON: + bp->flags |= TX_TIMESTAMPING_EN; + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : + NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x6AA); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : + NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3EEE); + break; + case HWTSTAMP_TX_ONESTEP_SYNC: + BNX2X_ERR("One-step timestamping is not supported\n"); + return -ERANGE; + } + + switch (bp->rx_filter) { + case HWTSTAMP_FILTER_NONE: + break; + case HWTSTAMP_FILTER_ALL: + case HWTSTAMP_FILTER_SOME: + bp->rx_filter = HWTSTAMP_FILTER_NONE; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; + /* Initialize PTP detection for UDP/IPv4 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EE); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFE); + break; + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; + /* Initialize PTP detection for UDP/IPv4 or UDP/IPv6 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EA); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FEE); + break; + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; + /* Initialize PTP detection L2 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6BF); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EFF); + + break; + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + /* Initialize PTP detection L2, UDP/IPv4 or UDP/IPv6 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6AA); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EEE); + break; + } + + /* Indicate to FW that this PF expects recorded PTP packets */ + rc = bnx2x_enable_ptp_packets(bp); + if (rc) + return rc; + + /* Enable sending PTP packets to host */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : + NIG_REG_P0_LLH_PTP_TO_HOST, 0x1); + + return 0; +} + +static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr) +{ + struct hwtstamp_config config; + int rc; + + DP(BNX2X_MSG_PTP, "HWTSTAMP IOCTL called\n"); + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + DP(BNX2X_MSG_PTP, "Requested tx_type: %d, requested rx_filters = %d\n", + config.tx_type, config.rx_filter); + + if (config.flags) { + BNX2X_ERR("config.flags is reserved for future use\n"); + return -EINVAL; + } + + bp->hwtstamp_ioctl_called = 1; + bp->tx_type = config.tx_type; + bp->rx_filter = config.rx_filter; + + rc = bnx2x_configure_ptp_filters(bp); + if (rc) + return rc; + + config.rx_filter = bp->rx_filter; + + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? + -EFAULT : 0; +} + +/* Configures HW for PTP */ +static int bnx2x_configure_ptp(struct bnx2x *bp) +{ + int rc, port = BP_PORT(bp); + u32 wb_data[2]; + + /* Reset PTP event detection rules - will be configured in the IOCTL */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : + NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : + NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF); + + /* Disable PTP packets to host - will be configured in the IOCTL*/ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : + NIG_REG_P0_LLH_PTP_TO_HOST, 0x0); + + /* Enable the PTP feature */ + REG_WR(bp, port ? NIG_REG_P1_PTP_EN : + NIG_REG_P0_PTP_EN, 0x3F); + + /* Enable the free-running counter */ + wb_data[0] = 0; + wb_data[1] = 0; + REG_WR_DMAE(bp, NIG_REG_TIMESYNC_GEN_REG + tsgen_ctrl, wb_data, 2); + + /* Reset drift register (offset register is not reset) */ + rc = bnx2x_send_reset_timesync_ramrod(bp); + if (rc) { + BNX2X_ERR("Failed to reset PHC drift register\n"); + return -EFAULT; + } + + /* Reset possibly old timestamps */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID : + NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : + NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000); + + return 0; +} + +/* Called during load, to initialize PTP-related stuff */ +void bnx2x_init_ptp(struct bnx2x *bp) +{ + int rc; + + /* Configure PTP in HW */ + rc = bnx2x_configure_ptp(bp); + if (rc) { + BNX2X_ERR("Stopping PTP initialization\n"); + return; + } + + /* Init work queue for Tx timestamping */ + INIT_WORK(&bp->ptp_task, bnx2x_ptp_task); + + /* Init cyclecounter and timecounter. This is done only in the first + * load. If done in every load, PTP application will fail when doing + * unload / load (e.g. MTU change) while it is running. + */ + if (!bp->timecounter_init_done) { + bnx2x_init_cyclecounter(bp); + timecounter_init(&bp->timecounter, &bp->cyclecounter, + ktime_to_ns(ktime_get_real())); + bp->timecounter_init_done = 1; + } + + DP(BNX2X_MSG_PTP, "PTP initialization ended successfully\n"); +}