X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fmtd%2Fnand%2Fvf610_nfc.c;fp=kernel%2Fdrivers%2Fmtd%2Fnand%2Fvf610_nfc.c;h=8805d63255797650bf3ce1d4ffbe576e08a36683;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=0000000000000000000000000000000000000000;hpb=f93b97fd65072de626c074dbe099a1fff05ce060;p=kvmfornfv.git diff --git a/kernel/drivers/mtd/nand/vf610_nfc.c b/kernel/drivers/mtd/nand/vf610_nfc.c new file mode 100644 index 000000000..8805d6325 --- /dev/null +++ b/kernel/drivers/mtd/nand/vf610_nfc.c @@ -0,0 +1,878 @@ +/* + * Copyright 2009-2015 Freescale Semiconductor, Inc. and others + * + * Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver. + * Jason ported to M54418TWR and MVFA5 (VF610). + * Authors: Stefan Agner + * Bill Pringlemeir + * Shaohui Xie + * Jason Jin + * + * Based on original driver mpc5121_nfc.c. + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Limitations: + * - Untested on MPC5125 and M54418. + * - DMA and pipelining not used. + * - 2K pages or less. + * - HW ECC: Only 2K page with 64+ OOB. + * - HW ECC: Only 24 and 32-bit error correction implemented. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "vf610_nfc" + +/* Register Offsets */ +#define NFC_FLASH_CMD1 0x3F00 +#define NFC_FLASH_CMD2 0x3F04 +#define NFC_COL_ADDR 0x3F08 +#define NFC_ROW_ADDR 0x3F0c +#define NFC_ROW_ADDR_INC 0x3F14 +#define NFC_FLASH_STATUS1 0x3F18 +#define NFC_FLASH_STATUS2 0x3F1c +#define NFC_CACHE_SWAP 0x3F28 +#define NFC_SECTOR_SIZE 0x3F2c +#define NFC_FLASH_CONFIG 0x3F30 +#define NFC_IRQ_STATUS 0x3F38 + +/* Addresses for NFC MAIN RAM BUFFER areas */ +#define NFC_MAIN_AREA(n) ((n) * 0x1000) + +#define PAGE_2K 0x0800 +#define OOB_64 0x0040 +#define OOB_MAX 0x0100 + +/* + * NFC_CMD2[CODE] values. See section: + * - 31.4.7 Flash Command Code Description, Vybrid manual + * - 23.8.6 Flash Command Sequencer, MPC5125 manual + * + * Briefly these are bitmasks of controller cycles. + */ +#define READ_PAGE_CMD_CODE 0x7EE0 +#define READ_ONFI_PARAM_CMD_CODE 0x4860 +#define PROGRAM_PAGE_CMD_CODE 0x7FC0 +#define ERASE_CMD_CODE 0x4EC0 +#define READ_ID_CMD_CODE 0x4804 +#define RESET_CMD_CODE 0x4040 +#define STATUS_READ_CMD_CODE 0x4068 + +/* NFC ECC mode define */ +#define ECC_BYPASS 0 +#define ECC_45_BYTE 6 +#define ECC_60_BYTE 7 + +/*** Register Mask and bit definitions */ + +/* NFC_FLASH_CMD1 Field */ +#define CMD_BYTE2_MASK 0xFF000000 +#define CMD_BYTE2_SHIFT 24 + +/* NFC_FLASH_CM2 Field */ +#define CMD_BYTE1_MASK 0xFF000000 +#define CMD_BYTE1_SHIFT 24 +#define CMD_CODE_MASK 0x00FFFF00 +#define CMD_CODE_SHIFT 8 +#define BUFNO_MASK 0x00000006 +#define BUFNO_SHIFT 1 +#define START_BIT BIT(0) + +/* NFC_COL_ADDR Field */ +#define COL_ADDR_MASK 0x0000FFFF +#define COL_ADDR_SHIFT 0 + +/* NFC_ROW_ADDR Field */ +#define ROW_ADDR_MASK 0x00FFFFFF +#define ROW_ADDR_SHIFT 0 +#define ROW_ADDR_CHIP_SEL_RB_MASK 0xF0000000 +#define ROW_ADDR_CHIP_SEL_RB_SHIFT 28 +#define ROW_ADDR_CHIP_SEL_MASK 0x0F000000 +#define ROW_ADDR_CHIP_SEL_SHIFT 24 + +/* NFC_FLASH_STATUS2 Field */ +#define STATUS_BYTE1_MASK 0x000000FF + +/* NFC_FLASH_CONFIG Field */ +#define CONFIG_ECC_SRAM_ADDR_MASK 0x7FC00000 +#define CONFIG_ECC_SRAM_ADDR_SHIFT 22 +#define CONFIG_ECC_SRAM_REQ_BIT BIT(21) +#define CONFIG_DMA_REQ_BIT BIT(20) +#define CONFIG_ECC_MODE_MASK 0x000E0000 +#define CONFIG_ECC_MODE_SHIFT 17 +#define CONFIG_FAST_FLASH_BIT BIT(16) +#define CONFIG_16BIT BIT(7) +#define CONFIG_BOOT_MODE_BIT BIT(6) +#define CONFIG_ADDR_AUTO_INCR_BIT BIT(5) +#define CONFIG_BUFNO_AUTO_INCR_BIT BIT(4) +#define CONFIG_PAGE_CNT_MASK 0xF +#define CONFIG_PAGE_CNT_SHIFT 0 + +/* NFC_IRQ_STATUS Field */ +#define IDLE_IRQ_BIT BIT(29) +#define IDLE_EN_BIT BIT(20) +#define CMD_DONE_CLEAR_BIT BIT(18) +#define IDLE_CLEAR_BIT BIT(17) + +/* + * ECC status - seems to consume 8 bytes (double word). The documented + * status byte is located in the lowest byte of the second word (which is + * the 4th or 7th byte depending on endianness). + * Calculate an offset to store the ECC status at the end of the buffer. + */ +#define ECC_SRAM_ADDR (PAGE_2K + OOB_MAX - 8) + +#define ECC_STATUS 0x4 +#define ECC_STATUS_MASK 0x80 +#define ECC_STATUS_ERR_COUNT 0x3F + +enum vf610_nfc_alt_buf { + ALT_BUF_DATA = 0, + ALT_BUF_ID = 1, + ALT_BUF_STAT = 2, + ALT_BUF_ONFI = 3, +}; + +enum vf610_nfc_variant { + NFC_VFC610 = 1, +}; + +struct vf610_nfc { + struct mtd_info mtd; + struct nand_chip chip; + struct device *dev; + void __iomem *regs; + struct completion cmd_done; + uint buf_offset; + int write_sz; + /* Status and ID are in alternate locations. */ + enum vf610_nfc_alt_buf alt_buf; + enum vf610_nfc_variant variant; + struct clk *clk; + bool use_hw_ecc; + u32 ecc_mode; +}; + +#define mtd_to_nfc(_mtd) container_of(_mtd, struct vf610_nfc, mtd) + +static struct nand_ecclayout vf610_nfc_ecc45 = { + .eccbytes = 45, + .eccpos = {19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63}, + .oobfree = { + {.offset = 2, + .length = 17} } +}; + +static struct nand_ecclayout vf610_nfc_ecc60 = { + .eccbytes = 60, + .eccpos = { 4, 5, 6, 7, 8, 9, 10, 11, + 12, 13, 14, 15, 16, 17, 18, 19, + 20, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 30, 31, 32, 33, 34, 35, + 36, 37, 38, 39, 40, 41, 42, 43, + 44, 45, 46, 47, 48, 49, 50, 51, + 52, 53, 54, 55, 56, 57, 58, 59, + 60, 61, 62, 63 }, + .oobfree = { + {.offset = 2, + .length = 2} } +}; + +static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg) +{ + return readl(nfc->regs + reg); +} + +static inline void vf610_nfc_write(struct vf610_nfc *nfc, uint reg, u32 val) +{ + writel(val, nfc->regs + reg); +} + +static inline void vf610_nfc_set(struct vf610_nfc *nfc, uint reg, u32 bits) +{ + vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) | bits); +} + +static inline void vf610_nfc_clear(struct vf610_nfc *nfc, uint reg, u32 bits) +{ + vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) & ~bits); +} + +static inline void vf610_nfc_set_field(struct vf610_nfc *nfc, u32 reg, + u32 mask, u32 shift, u32 val) +{ + vf610_nfc_write(nfc, reg, + (vf610_nfc_read(nfc, reg) & (~mask)) | val << shift); +} + +static inline void vf610_nfc_memcpy(void *dst, const void __iomem *src, + size_t n) +{ + /* + * Use this accessor for the internal SRAM buffers. On the ARM + * Freescale Vybrid SoC it's known that the driver can treat + * the SRAM buffer as if it's memory. Other platform might need + * to treat the buffers differently. + * + * For the time being, use memcpy + */ + memcpy(dst, src, n); +} + +/* Clear flags for upcoming command */ +static inline void vf610_nfc_clear_status(struct vf610_nfc *nfc) +{ + u32 tmp = vf610_nfc_read(nfc, NFC_IRQ_STATUS); + + tmp |= CMD_DONE_CLEAR_BIT | IDLE_CLEAR_BIT; + vf610_nfc_write(nfc, NFC_IRQ_STATUS, tmp); +} + +static void vf610_nfc_done(struct vf610_nfc *nfc) +{ + unsigned long timeout = msecs_to_jiffies(100); + + /* + * Barrier is needed after this write. This write need + * to be done before reading the next register the first + * time. + * vf610_nfc_set implicates such a barrier by using writel + * to write to the register. + */ + vf610_nfc_set(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT); + vf610_nfc_set(nfc, NFC_FLASH_CMD2, START_BIT); + + if (!wait_for_completion_timeout(&nfc->cmd_done, timeout)) + dev_warn(nfc->dev, "Timeout while waiting for BUSY.\n"); + + vf610_nfc_clear_status(nfc); +} + +static u8 vf610_nfc_get_id(struct vf610_nfc *nfc, int col) +{ + u32 flash_id; + + if (col < 4) { + flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS1); + flash_id >>= (3 - col) * 8; + } else { + flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS2); + flash_id >>= 24; + } + + return flash_id & 0xff; +} + +static u8 vf610_nfc_get_status(struct vf610_nfc *nfc) +{ + return vf610_nfc_read(nfc, NFC_FLASH_STATUS2) & STATUS_BYTE1_MASK; +} + +static void vf610_nfc_send_command(struct vf610_nfc *nfc, u32 cmd_byte1, + u32 cmd_code) +{ + u32 tmp; + + vf610_nfc_clear_status(nfc); + + tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD2); + tmp &= ~(CMD_BYTE1_MASK | CMD_CODE_MASK | BUFNO_MASK); + tmp |= cmd_byte1 << CMD_BYTE1_SHIFT; + tmp |= cmd_code << CMD_CODE_SHIFT; + vf610_nfc_write(nfc, NFC_FLASH_CMD2, tmp); +} + +static void vf610_nfc_send_commands(struct vf610_nfc *nfc, u32 cmd_byte1, + u32 cmd_byte2, u32 cmd_code) +{ + u32 tmp; + + vf610_nfc_send_command(nfc, cmd_byte1, cmd_code); + + tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD1); + tmp &= ~CMD_BYTE2_MASK; + tmp |= cmd_byte2 << CMD_BYTE2_SHIFT; + vf610_nfc_write(nfc, NFC_FLASH_CMD1, tmp); +} + +static irqreturn_t vf610_nfc_irq(int irq, void *data) +{ + struct mtd_info *mtd = data; + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + + vf610_nfc_clear(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT); + complete(&nfc->cmd_done); + + return IRQ_HANDLED; +} + +static void vf610_nfc_addr_cycle(struct vf610_nfc *nfc, int column, int page) +{ + if (column != -1) { + if (nfc->chip.options & NAND_BUSWIDTH_16) + column = column / 2; + vf610_nfc_set_field(nfc, NFC_COL_ADDR, COL_ADDR_MASK, + COL_ADDR_SHIFT, column); + } + if (page != -1) + vf610_nfc_set_field(nfc, NFC_ROW_ADDR, ROW_ADDR_MASK, + ROW_ADDR_SHIFT, page); +} + +static inline void vf610_nfc_ecc_mode(struct vf610_nfc *nfc, int ecc_mode) +{ + vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG, + CONFIG_ECC_MODE_MASK, + CONFIG_ECC_MODE_SHIFT, ecc_mode); +} + +static inline void vf610_nfc_transfer_size(struct vf610_nfc *nfc, int size) +{ + vf610_nfc_write(nfc, NFC_SECTOR_SIZE, size); +} + +static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, + int column, int page) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + int trfr_sz = nfc->chip.options & NAND_BUSWIDTH_16 ? 1 : 0; + + nfc->buf_offset = max(column, 0); + nfc->alt_buf = ALT_BUF_DATA; + + switch (command) { + case NAND_CMD_SEQIN: + /* Use valid column/page from preread... */ + vf610_nfc_addr_cycle(nfc, column, page); + nfc->buf_offset = 0; + + /* + * SEQIN => data => PAGEPROG sequence is done by the controller + * hence we do not need to issue the command here... + */ + return; + case NAND_CMD_PAGEPROG: + trfr_sz += nfc->write_sz; + vf610_nfc_transfer_size(nfc, trfr_sz); + vf610_nfc_send_commands(nfc, NAND_CMD_SEQIN, + command, PROGRAM_PAGE_CMD_CODE); + if (nfc->use_hw_ecc) + vf610_nfc_ecc_mode(nfc, nfc->ecc_mode); + else + vf610_nfc_ecc_mode(nfc, ECC_BYPASS); + break; + + case NAND_CMD_RESET: + vf610_nfc_transfer_size(nfc, 0); + vf610_nfc_send_command(nfc, command, RESET_CMD_CODE); + break; + + case NAND_CMD_READOOB: + trfr_sz += mtd->oobsize; + column = mtd->writesize; + vf610_nfc_transfer_size(nfc, trfr_sz); + vf610_nfc_send_commands(nfc, NAND_CMD_READ0, + NAND_CMD_READSTART, READ_PAGE_CMD_CODE); + vf610_nfc_addr_cycle(nfc, column, page); + vf610_nfc_ecc_mode(nfc, ECC_BYPASS); + break; + + case NAND_CMD_READ0: + trfr_sz += mtd->writesize + mtd->oobsize; + vf610_nfc_transfer_size(nfc, trfr_sz); + vf610_nfc_send_commands(nfc, NAND_CMD_READ0, + NAND_CMD_READSTART, READ_PAGE_CMD_CODE); + vf610_nfc_addr_cycle(nfc, column, page); + vf610_nfc_ecc_mode(nfc, nfc->ecc_mode); + break; + + case NAND_CMD_PARAM: + nfc->alt_buf = ALT_BUF_ONFI; + trfr_sz = 3 * sizeof(struct nand_onfi_params); + vf610_nfc_transfer_size(nfc, trfr_sz); + vf610_nfc_send_command(nfc, command, READ_ONFI_PARAM_CMD_CODE); + vf610_nfc_addr_cycle(nfc, -1, column); + vf610_nfc_ecc_mode(nfc, ECC_BYPASS); + break; + + case NAND_CMD_ERASE1: + vf610_nfc_transfer_size(nfc, 0); + vf610_nfc_send_commands(nfc, command, + NAND_CMD_ERASE2, ERASE_CMD_CODE); + vf610_nfc_addr_cycle(nfc, column, page); + break; + + case NAND_CMD_READID: + nfc->alt_buf = ALT_BUF_ID; + nfc->buf_offset = 0; + vf610_nfc_transfer_size(nfc, 0); + vf610_nfc_send_command(nfc, command, READ_ID_CMD_CODE); + vf610_nfc_addr_cycle(nfc, -1, column); + break; + + case NAND_CMD_STATUS: + nfc->alt_buf = ALT_BUF_STAT; + vf610_nfc_transfer_size(nfc, 0); + vf610_nfc_send_command(nfc, command, STATUS_READ_CMD_CODE); + break; + default: + return; + } + + vf610_nfc_done(nfc); + + nfc->use_hw_ecc = false; + nfc->write_sz = 0; +} + +static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + uint c = nfc->buf_offset; + + /* Alternate buffers are only supported through read_byte */ + WARN_ON(nfc->alt_buf); + + vf610_nfc_memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c, len); + + nfc->buf_offset += len; +} + +static void vf610_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, + int len) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + uint c = nfc->buf_offset; + uint l; + + l = min_t(uint, len, mtd->writesize + mtd->oobsize - c); + vf610_nfc_memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l); + + nfc->write_sz += l; + nfc->buf_offset += l; +} + +static uint8_t vf610_nfc_read_byte(struct mtd_info *mtd) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + u8 tmp; + uint c = nfc->buf_offset; + + switch (nfc->alt_buf) { + case ALT_BUF_ID: + tmp = vf610_nfc_get_id(nfc, c); + break; + case ALT_BUF_STAT: + tmp = vf610_nfc_get_status(nfc); + break; +#ifdef __LITTLE_ENDIAN + case ALT_BUF_ONFI: + /* Reverse byte since the controller uses big endianness */ + c = nfc->buf_offset ^ 0x3; + /* fall-through */ +#endif + default: + tmp = *((u8 *)(nfc->regs + NFC_MAIN_AREA(0) + c)); + break; + } + nfc->buf_offset++; + return tmp; +} + +static u16 vf610_nfc_read_word(struct mtd_info *mtd) +{ + u16 tmp; + + vf610_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp)); + return tmp; +} + +/* If not provided, upper layers apply a fixed delay. */ +static int vf610_nfc_dev_ready(struct mtd_info *mtd) +{ + /* NFC handles R/B internally; always ready. */ + return 1; +} + +/* + * This function supports Vybrid only (MPC5125 would have full RB and four CS) + */ +static void vf610_nfc_select_chip(struct mtd_info *mtd, int chip) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + u32 tmp = vf610_nfc_read(nfc, NFC_ROW_ADDR); + + /* Vybrid only (MPC5125 would have full RB and four CS) */ + if (nfc->variant != NFC_VFC610) + return; + + tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK); + + if (chip >= 0) { + tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT; + tmp |= BIT(chip) << ROW_ADDR_CHIP_SEL_SHIFT; + } + + vf610_nfc_write(nfc, NFC_ROW_ADDR, tmp); +} + +/* Count the number of 0's in buff up to max_bits */ +static inline int count_written_bits(uint8_t *buff, int size, int max_bits) +{ + uint32_t *buff32 = (uint32_t *)buff; + int k, written_bits = 0; + + for (k = 0; k < (size / 4); k++) { + written_bits += hweight32(~buff32[k]); + if (unlikely(written_bits > max_bits)) + break; + } + + return written_bits; +} + +static inline int vf610_nfc_correct_data(struct mtd_info *mtd, uint8_t *dat, + uint8_t *oob, int page) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + u32 ecc_status_off = NFC_MAIN_AREA(0) + ECC_SRAM_ADDR + ECC_STATUS; + u8 ecc_status; + u8 ecc_count; + int flips_threshold = nfc->chip.ecc.strength / 2; + + ecc_status = vf610_nfc_read(nfc, ecc_status_off) & 0xff; + ecc_count = ecc_status & ECC_STATUS_ERR_COUNT; + + if (!(ecc_status & ECC_STATUS_MASK)) + return ecc_count; + + /* Read OOB without ECC unit enabled */ + vf610_nfc_command(mtd, NAND_CMD_READOOB, 0, page); + vf610_nfc_read_buf(mtd, oob, mtd->oobsize); + + /* + * On an erased page, bit count (including OOB) should be zero or + * at least less then half of the ECC strength. + */ + return nand_check_erased_ecc_chunk(dat, nfc->chip.ecc.size, oob, + mtd->oobsize, NULL, 0, + flips_threshold); +} + +static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + int eccsize = chip->ecc.size; + int stat; + + vf610_nfc_read_buf(mtd, buf, eccsize); + if (oob_required) + vf610_nfc_read_buf(mtd, chip->oob_poi, mtd->oobsize); + + stat = vf610_nfc_correct_data(mtd, buf, chip->oob_poi, page); + + if (stat < 0) { + mtd->ecc_stats.failed++; + return 0; + } else { + mtd->ecc_stats.corrected += stat; + return stat; + } +} + +static int vf610_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, int page) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + + vf610_nfc_write_buf(mtd, buf, mtd->writesize); + if (oob_required) + vf610_nfc_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + /* Always write whole page including OOB due to HW ECC */ + nfc->use_hw_ecc = true; + nfc->write_sz = mtd->writesize + mtd->oobsize; + + return 0; +} + +static const struct of_device_id vf610_nfc_dt_ids[] = { + { .compatible = "fsl,vf610-nfc", .data = (void *)NFC_VFC610 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, vf610_nfc_dt_ids); + +static void vf610_nfc_preinit_controller(struct vf610_nfc *nfc) +{ + vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT); + vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT); + vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT); + vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT); + vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT); + vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT); + + /* Disable virtual pages, only one elementary transfer unit */ + vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK, + CONFIG_PAGE_CNT_SHIFT, 1); +} + +static void vf610_nfc_init_controller(struct vf610_nfc *nfc) +{ + if (nfc->chip.options & NAND_BUSWIDTH_16) + vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT); + else + vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT); + + if (nfc->chip.ecc.mode == NAND_ECC_HW) { + /* Set ECC status offset in SRAM */ + vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG, + CONFIG_ECC_SRAM_ADDR_MASK, + CONFIG_ECC_SRAM_ADDR_SHIFT, + ECC_SRAM_ADDR >> 3); + + /* Enable ECC status in SRAM */ + vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT); + } +} + +static int vf610_nfc_probe(struct platform_device *pdev) +{ + struct vf610_nfc *nfc; + struct resource *res; + struct mtd_info *mtd; + struct nand_chip *chip; + struct device_node *child; + const struct of_device_id *of_id; + int err; + int irq; + + nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL); + if (!nfc) + return -ENOMEM; + + nfc->dev = &pdev->dev; + mtd = &nfc->mtd; + chip = &nfc->chip; + + mtd->priv = chip; + mtd->owner = THIS_MODULE; + mtd->dev.parent = nfc->dev; + mtd->name = DRV_NAME; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + nfc->regs = devm_ioremap_resource(nfc->dev, res); + if (IS_ERR(nfc->regs)) + return PTR_ERR(nfc->regs); + + nfc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(nfc->clk)) + return PTR_ERR(nfc->clk); + + err = clk_prepare_enable(nfc->clk); + if (err) { + dev_err(nfc->dev, "Unable to enable clock!\n"); + return err; + } + + of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev); + nfc->variant = (enum vf610_nfc_variant)of_id->data; + + for_each_available_child_of_node(nfc->dev->of_node, child) { + if (of_device_is_compatible(child, "fsl,vf610-nfc-nandcs")) { + + if (chip->flash_node) { + dev_err(nfc->dev, + "Only one NAND chip supported!\n"); + err = -EINVAL; + goto error; + } + + chip->flash_node = child; + } + } + + if (!chip->flash_node) { + dev_err(nfc->dev, "NAND chip sub-node missing!\n"); + err = -ENODEV; + goto err_clk; + } + + chip->dev_ready = vf610_nfc_dev_ready; + chip->cmdfunc = vf610_nfc_command; + chip->read_byte = vf610_nfc_read_byte; + chip->read_word = vf610_nfc_read_word; + chip->read_buf = vf610_nfc_read_buf; + chip->write_buf = vf610_nfc_write_buf; + chip->select_chip = vf610_nfc_select_chip; + + chip->options |= NAND_NO_SUBPAGE_WRITE; + + init_completion(&nfc->cmd_done); + + err = devm_request_irq(nfc->dev, irq, vf610_nfc_irq, 0, DRV_NAME, mtd); + if (err) { + dev_err(nfc->dev, "Error requesting IRQ!\n"); + goto error; + } + + vf610_nfc_preinit_controller(nfc); + + /* first scan to find the device and get the page size */ + if (nand_scan_ident(mtd, 1, NULL)) { + err = -ENXIO; + goto error; + } + + vf610_nfc_init_controller(nfc); + + /* Bad block options. */ + if (chip->bbt_options & NAND_BBT_USE_FLASH) + chip->bbt_options |= NAND_BBT_NO_OOB; + + /* Single buffer only, max 256 OOB minus ECC status */ + if (mtd->writesize + mtd->oobsize > PAGE_2K + OOB_MAX - 8) { + dev_err(nfc->dev, "Unsupported flash page size\n"); + err = -ENXIO; + goto error; + } + + if (chip->ecc.mode == NAND_ECC_HW) { + if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) { + dev_err(nfc->dev, "Unsupported flash with hwecc\n"); + err = -ENXIO; + goto error; + } + + if (chip->ecc.size != mtd->writesize) { + dev_err(nfc->dev, "Step size needs to be page size\n"); + err = -ENXIO; + goto error; + } + + /* Only 64 byte ECC layouts known */ + if (mtd->oobsize > 64) + mtd->oobsize = 64; + + if (chip->ecc.strength == 32) { + nfc->ecc_mode = ECC_60_BYTE; + chip->ecc.bytes = 60; + chip->ecc.layout = &vf610_nfc_ecc60; + } else if (chip->ecc.strength == 24) { + nfc->ecc_mode = ECC_45_BYTE; + chip->ecc.bytes = 45; + chip->ecc.layout = &vf610_nfc_ecc45; + } else { + dev_err(nfc->dev, "Unsupported ECC strength\n"); + err = -ENXIO; + goto error; + } + + /* propagate ecc.layout to mtd_info */ + mtd->ecclayout = chip->ecc.layout; + chip->ecc.read_page = vf610_nfc_read_page; + chip->ecc.write_page = vf610_nfc_write_page; + + chip->ecc.size = PAGE_2K; + } + + /* second phase scan */ + if (nand_scan_tail(mtd)) { + err = -ENXIO; + goto error; + } + + platform_set_drvdata(pdev, mtd); + + /* Register device in MTD */ + return mtd_device_parse_register(mtd, NULL, + &(struct mtd_part_parser_data){ + .of_node = chip->flash_node, + }, + NULL, 0); + +error: + of_node_put(chip->flash_node); +err_clk: + clk_disable_unprepare(nfc->clk); + return err; +} + +static int vf610_nfc_remove(struct platform_device *pdev) +{ + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + + nand_release(mtd); + clk_disable_unprepare(nfc->clk); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int vf610_nfc_suspend(struct device *dev) +{ + struct mtd_info *mtd = dev_get_drvdata(dev); + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + + clk_disable_unprepare(nfc->clk); + return 0; +} + +static int vf610_nfc_resume(struct device *dev) +{ + struct mtd_info *mtd = dev_get_drvdata(dev); + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + + pinctrl_pm_select_default_state(dev); + + clk_prepare_enable(nfc->clk); + + vf610_nfc_preinit_controller(nfc); + vf610_nfc_init_controller(nfc); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(vf610_nfc_pm_ops, vf610_nfc_suspend, vf610_nfc_resume); + +static struct platform_driver vf610_nfc_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = vf610_nfc_dt_ids, + .pm = &vf610_nfc_pm_ops, + }, + .probe = vf610_nfc_probe, + .remove = vf610_nfc_remove, +}; + +module_platform_driver(vf610_nfc_driver); + +MODULE_AUTHOR("Stefan Agner "); +MODULE_DESCRIPTION("Freescale VF610/MPC5125 NFC MTD NAND driver"); +MODULE_LICENSE("GPL");