X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fmmc%2Fhost%2FKconfig;h=2e6d2fff1096ac53b8a87790aad75cb09428a62a;hb=52f993b8e89487ec9ee15a7fb4979e0f09a45b27;hp=b1f837e749fe83d51fa4ec1410081ac44d97fb33;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/kernel/drivers/mmc/host/Kconfig b/kernel/drivers/mmc/host/Kconfig
index b1f837e74..2e6d2fff1 100644
--- a/kernel/drivers/mmc/host/Kconfig
+++ b/kernel/drivers/mmc/host/Kconfig
@@ -67,7 +67,7 @@ config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
 	  has the effect of scrambling the addresses and formats of data
 	  accessed in sizes other than the datum size.
 
-	  This is the case for the Freescale eSDHC and Nintendo Wii SDHCI.
+	  This is the case for the Nintendo Wii SDHCI.
 
 config MMC_SDHCI_PCI
 	tristate "SDHCI support on PCI bus"
@@ -97,6 +97,7 @@ config MMC_RICOH_MMC
 config MMC_SDHCI_ACPI
 	tristate "SDHCI support for ACPI enumerated SDHCI controllers"
 	depends on MMC_SDHCI && ACPI
+	select IOSF_MBI if X86
 	help
 	  This selects support for ACPI enumerated SDHCI controllers,
 	  identified by ACPI Compatibility ID PNP0D40 or specific
@@ -129,11 +130,19 @@ config MMC_SDHCI_OF_ARASAN
 
 	  If unsure, say N.
 
+config MMC_SDHCI_OF_AT91
+	tristate "SDHCI OF support for the Atmel SDMMC controller"
+	depends on MMC_SDHCI_PLTFM
+	depends on OF
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the Atmel SDMMC driver
+
 config MMC_SDHCI_OF_ESDHC
 	tristate "SDHCI OF support for the Freescale eSDHC controller"
 	depends on MMC_SDHCI_PLTFM
-	depends on PPC
-	select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
+	depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
+	select MMC_SDHCI_IO_ACCESSORS
 	help
 	  This selects the Freescale eSDHC controller support.
 
@@ -219,6 +228,7 @@ config MMC_SDHCI_SIRF
 	tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
 	depends on ARCH_SIRF
 	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
 	help
 	  This selects the SDHCI support for SiRF System-on-Chip devices.
 
@@ -357,7 +367,7 @@ config MMC_OMAP
 config MMC_OMAP_HS
 	tristate "TI OMAP High Speed Multimedia Card Interface support"
 	depends on HAS_DMA
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
 	help
 	  This selects the TI OMAP High Speed Multimedia card Interface.
 	  If you have an omap2plus board with a Multimedia Card slot,
@@ -464,7 +474,8 @@ config MMC_DAVINCI
 
 config MMC_GOLDFISH
 	tristate "goldfish qemu Multimedia Card Interface support"
-	depends on GOLDFISH
+	depends on HAS_DMA
+	depends on GOLDFISH || COMPILE_TEST
 	help
 	  This selects the Goldfish Multimedia card Interface emulation
 	  found on the Goldfish Android virtual device emulation.
@@ -606,15 +617,7 @@ config MMC_DW
 	help
 	  This selects support for the Synopsys DesignWare Mobile Storage IP
 	  block, this provides host support for SD and MMC interfaces, in both
-	  PIO and external DMA modes.
-
-config MMC_DW_IDMAC
-	bool "Internal DMAC interface"
-	depends on MMC_DW
-	help
-	  This selects support for the internal DMAC block within the Synopsys
-	  Designware Mobile Storage IP block. This disables the external DMA
-	  interface.
+	  PIO, internal DMA mode and external DMA mode.
 
 config MMC_DW_PLTFM
 	tristate "Synopsys Designware MCI Support as platform device"
@@ -643,7 +646,6 @@ config MMC_DW_K3
 	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
 	depends on MMC_DW
 	select MMC_DW_PLTFM
-	select MMC_DW_IDMAC
 	help
 	  This selects support for Hisilicon K3 SoC specific extensions to the
 	  Synopsys DesignWare Memory Card Interface driver. Select this option
@@ -775,3 +777,12 @@ config MMC_TOSHIBA_PCI
 	tristate "Toshiba Type A SD/MMC Card Interface Driver"
 	depends on PCI
 	help
+
+config MMC_MTK
+	tristate "MediaTek SD/MMC Card Interface support"
+	depends on HAS_DMA
+	help
+	  This selects the MediaTek(R) Secure digital and Multimedia card Interface.
+	  If you have a machine with a integrated SD/MMC card reader, say Y or M here.
+	  This is needed if support for any SD/SDIO/MMC devices is required.
+	  If unsure, say N.