X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fmfd%2Ftwl4030-irq.c;fp=kernel%2Fdrivers%2Fmfd%2Ftwl4030-irq.c;h=1b772ef761cbf63cf1af01a32f9d720258214669;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/mfd/twl4030-irq.c b/kernel/drivers/mfd/twl4030-irq.c new file mode 100644 index 000000000..1b772ef76 --- /dev/null +++ b/kernel/drivers/mfd/twl4030-irq.c @@ -0,0 +1,797 @@ +/* + * twl4030-irq.c - TWL4030/TPS659x0 irq support + * + * Copyright (C) 2005-2006 Texas Instruments, Inc. + * + * Modifications to defer interrupt handling to a kernel thread: + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn + * + * Code cleanup and modifications to IRQ handler. + * by syed khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "twl-core.h" + +/* + * TWL4030 IRQ handling has two stages in hardware, and thus in software. + * The Primary Interrupt Handler (PIH) stage exposes status bits saying + * which Secondary Interrupt Handler (SIH) stage is raising an interrupt. + * SIH modules are more traditional IRQ components, which support per-IRQ + * enable/disable and trigger controls; they do most of the work. + * + * These chips are designed to support IRQ handling from two different + * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status + * and mask registers in the PIH and SIH modules. + * + * We set up IRQs starting at a platform-specified base, always starting + * with PIH and the SIH for PWR_INT and then usually adding GPIO: + * base + 0 .. base + 7 PIH + * base + 8 .. base + 15 SIH for PWR_INT + * base + 16 .. base + 33 SIH for GPIO + */ +#define TWL4030_CORE_NR_IRQS 8 +#define TWL4030_PWR_NR_IRQS 8 + +/* PIH register offsets */ +#define REG_PIH_ISR_P1 0x01 +#define REG_PIH_ISR_P2 0x02 +#define REG_PIH_SIR 0x03 /* for testing */ + +/* Linux could (eventually) use either IRQ line */ +static int irq_line; + +struct sih { + char name[8]; + u8 module; /* module id */ + u8 control_offset; /* for SIH_CTRL */ + bool set_cor; + + u8 bits; /* valid in isr/imr */ + u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */ + + u8 edr_offset; + u8 bytes_edr; /* bytelen of EDR */ + + u8 irq_lines; /* number of supported irq lines */ + + /* SIR ignored -- set interrupt, for testing only */ + struct sih_irq_data { + u8 isr_offset; + u8 imr_offset; + } mask[2]; + /* + 2 bytes padding */ +}; + +static const struct sih *sih_modules; +static int nr_sih_modules; + +#define SIH_INITIALIZER(modname, nbits) \ + .module = TWL4030_MODULE_ ## modname, \ + .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \ + .bits = nbits, \ + .bytes_ixr = DIV_ROUND_UP(nbits, 8), \ + .edr_offset = TWL4030_ ## modname ## _EDR, \ + .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \ + .irq_lines = 2, \ + .mask = { { \ + .isr_offset = TWL4030_ ## modname ## _ISR1, \ + .imr_offset = TWL4030_ ## modname ## _IMR1, \ + }, \ + { \ + .isr_offset = TWL4030_ ## modname ## _ISR2, \ + .imr_offset = TWL4030_ ## modname ## _IMR2, \ + }, }, + +/* register naming policies are inconsistent ... */ +#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1 +#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD +#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT + + +/* + * Order in this table matches order in PIH_ISR. That is, + * BIT(n) in PIH_ISR is sih_modules[n]. + */ +/* sih_modules_twl4030 is used both in twl4030 and twl5030 */ +static const struct sih sih_modules_twl4030[6] = { + [0] = { + .name = "gpio", + .module = TWL4030_MODULE_GPIO, + .control_offset = REG_GPIO_SIH_CTRL, + .set_cor = true, + .bits = TWL4030_GPIO_MAX, + .bytes_ixr = 3, + /* Note: *all* of these IRQs default to no-trigger */ + .edr_offset = REG_GPIO_EDR1, + .bytes_edr = 5, + .irq_lines = 2, + .mask = { { + .isr_offset = REG_GPIO_ISR1A, + .imr_offset = REG_GPIO_IMR1A, + }, { + .isr_offset = REG_GPIO_ISR1B, + .imr_offset = REG_GPIO_IMR1B, + }, }, + }, + [1] = { + .name = "keypad", + .set_cor = true, + SIH_INITIALIZER(KEYPAD_KEYP, 4) + }, + [2] = { + .name = "bci", + .module = TWL4030_MODULE_INTERRUPTS, + .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL, + .set_cor = true, + .bits = 12, + .bytes_ixr = 2, + .edr_offset = TWL4030_INTERRUPTS_BCIEDR1, + /* Note: most of these IRQs default to no-trigger */ + .bytes_edr = 3, + .irq_lines = 2, + .mask = { { + .isr_offset = TWL4030_INTERRUPTS_BCIISR1A, + .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A, + }, { + .isr_offset = TWL4030_INTERRUPTS_BCIISR1B, + .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B, + }, }, + }, + [3] = { + .name = "madc", + SIH_INITIALIZER(MADC, 4) + }, + [4] = { + /* USB doesn't use the same SIH organization */ + .name = "usb", + }, + [5] = { + .name = "power", + .set_cor = true, + SIH_INITIALIZER(INT_PWR, 8) + }, + /* there are no SIH modules #6 or #7 ... */ +}; + +static const struct sih sih_modules_twl5031[8] = { + [0] = { + .name = "gpio", + .module = TWL4030_MODULE_GPIO, + .control_offset = REG_GPIO_SIH_CTRL, + .set_cor = true, + .bits = TWL4030_GPIO_MAX, + .bytes_ixr = 3, + /* Note: *all* of these IRQs default to no-trigger */ + .edr_offset = REG_GPIO_EDR1, + .bytes_edr = 5, + .irq_lines = 2, + .mask = { { + .isr_offset = REG_GPIO_ISR1A, + .imr_offset = REG_GPIO_IMR1A, + }, { + .isr_offset = REG_GPIO_ISR1B, + .imr_offset = REG_GPIO_IMR1B, + }, }, + }, + [1] = { + .name = "keypad", + .set_cor = true, + SIH_INITIALIZER(KEYPAD_KEYP, 4) + }, + [2] = { + .name = "bci", + .module = TWL5031_MODULE_INTERRUPTS, + .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL, + .bits = 7, + .bytes_ixr = 1, + .edr_offset = TWL5031_INTERRUPTS_BCIEDR1, + /* Note: most of these IRQs default to no-trigger */ + .bytes_edr = 2, + .irq_lines = 2, + .mask = { { + .isr_offset = TWL5031_INTERRUPTS_BCIISR1, + .imr_offset = TWL5031_INTERRUPTS_BCIIMR1, + }, { + .isr_offset = TWL5031_INTERRUPTS_BCIISR2, + .imr_offset = TWL5031_INTERRUPTS_BCIIMR2, + }, }, + }, + [3] = { + .name = "madc", + SIH_INITIALIZER(MADC, 4) + }, + [4] = { + /* USB doesn't use the same SIH organization */ + .name = "usb", + }, + [5] = { + .name = "power", + .set_cor = true, + SIH_INITIALIZER(INT_PWR, 8) + }, + [6] = { + /* + * ECI/DBI doesn't use the same SIH organization. + * For example, it supports only one interrupt output line. + * That is, the interrupts are seen on both INT1 and INT2 lines. + */ + .name = "eci_dbi", + .module = TWL5031_MODULE_ACCESSORY, + .bits = 9, + .bytes_ixr = 2, + .irq_lines = 1, + .mask = { { + .isr_offset = TWL5031_ACIIDR_LSB, + .imr_offset = TWL5031_ACIIMR_LSB, + }, }, + + }, + [7] = { + /* Audio accessory */ + .name = "audio", + .module = TWL5031_MODULE_ACCESSORY, + .control_offset = TWL5031_ACCSIHCTRL, + .bits = 2, + .bytes_ixr = 1, + .edr_offset = TWL5031_ACCEDR1, + /* Note: most of these IRQs default to no-trigger */ + .bytes_edr = 1, + .irq_lines = 2, + .mask = { { + .isr_offset = TWL5031_ACCISR1, + .imr_offset = TWL5031_ACCIMR1, + }, { + .isr_offset = TWL5031_ACCISR2, + .imr_offset = TWL5031_ACCIMR2, + }, }, + }, +}; + +#undef TWL4030_MODULE_KEYPAD_KEYP +#undef TWL4030_MODULE_INT_PWR +#undef TWL4030_INT_PWR_EDR + +/*----------------------------------------------------------------------*/ + +static unsigned twl4030_irq_base; + +/* + * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt. + * This is a chained interrupt, so there is no desc->action method for it. + * Now we need to query the interrupt controller in the twl4030 to determine + * which module is generating the interrupt request. However, we can't do i2c + * transactions in interrupt context, so we must defer that work to a kernel + * thread. All we do here is acknowledge and mask the interrupt and wakeup + * the kernel thread. + */ +static irqreturn_t handle_twl4030_pih(int irq, void *devid) +{ + irqreturn_t ret; + u8 pih_isr; + + ret = twl_i2c_read_u8(TWL_MODULE_PIH, &pih_isr, + REG_PIH_ISR_P1); + if (ret) { + pr_warn("twl4030: I2C error %d reading PIH ISR\n", ret); + return IRQ_NONE; + } + + while (pih_isr) { + unsigned long pending = __ffs(pih_isr); + unsigned int irq; + + pih_isr &= ~BIT(pending); + irq = pending + twl4030_irq_base; + handle_nested_irq(irq); + } + + return IRQ_HANDLED; +} + +/*----------------------------------------------------------------------*/ + +/* + * twl4030_init_sih_modules() ... start from a known state where no + * IRQs will be coming in, and where we can quickly enable them then + * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL. + * + * NOTE: we don't touch EDR registers here; they stay with hardware + * defaults or whatever the last value was. Note that when both EDR + * bits for an IRQ are clear, that's as if its IMR bit is set... + */ +static int twl4030_init_sih_modules(unsigned line) +{ + const struct sih *sih; + u8 buf[4]; + int i; + int status; + + /* line 0 == int1_n signal; line 1 == int2_n signal */ + if (line > 1) + return -EINVAL; + + irq_line = line; + + /* disable all interrupts on our line */ + memset(buf, 0xff, sizeof(buf)); + sih = sih_modules; + for (i = 0; i < nr_sih_modules; i++, sih++) { + /* skip USB -- it's funky */ + if (!sih->bytes_ixr) + continue; + + /* Not all the SIH modules support multiple interrupt lines */ + if (sih->irq_lines <= line) + continue; + + status = twl_i2c_write(sih->module, buf, + sih->mask[line].imr_offset, sih->bytes_ixr); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "IMR"); + + /* + * Maybe disable "exclusive" mode; buffer second pending irq; + * set Clear-On-Read (COR) bit. + * + * NOTE that sometimes COR polarity is documented as being + * inverted: for MADC, COR=1 means "clear on write". + * And for PWR_INT it's not documented... + */ + if (sih->set_cor) { + status = twl_i2c_write_u8(sih->module, + TWL4030_SIH_CTRL_COR_MASK, + sih->control_offset); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "SIH_CTRL"); + } + } + + sih = sih_modules; + for (i = 0; i < nr_sih_modules; i++, sih++) { + u8 rxbuf[4]; + int j; + + /* skip USB */ + if (!sih->bytes_ixr) + continue; + + /* Not all the SIH modules support multiple interrupt lines */ + if (sih->irq_lines <= line) + continue; + + /* + * Clear pending interrupt status. Either the read was + * enough, or we need to write those bits. Repeat, in + * case an IRQ is pending (PENDDIS=0) ... that's not + * uncommon with PWR_INT.PWRON. + */ + for (j = 0; j < 2; j++) { + status = twl_i2c_read(sih->module, rxbuf, + sih->mask[line].isr_offset, sih->bytes_ixr); + if (status < 0) + pr_warn("twl4030: err %d initializing %s %s\n", + status, sih->name, "ISR"); + + if (!sih->set_cor) { + status = twl_i2c_write(sih->module, buf, + sih->mask[line].isr_offset, + sih->bytes_ixr); + if (status < 0) + pr_warn("twl4030: write failed: %d\n", + status); + } + /* + * else COR=1 means read sufficed. + * (for most SIH modules...) + */ + } + } + + return 0; +} + +static inline void activate_irq(int irq) +{ +#ifdef CONFIG_ARM + /* + * ARM requires an extra step to clear IRQ_NOREQUEST, which it + * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. + */ + set_irq_flags(irq, IRQF_VALID); +#else + /* same effect on other architectures */ + irq_set_noprobe(irq); +#endif +} + +/*----------------------------------------------------------------------*/ + +struct sih_agent { + int irq_base; + const struct sih *sih; + + u32 imr; + bool imr_change_pending; + + u32 edge_change; + + struct mutex irq_lock; + char *irq_name; +}; + +/*----------------------------------------------------------------------*/ + +/* + * All irq_chip methods get issued from code holding irq_desc[irq].lock, + * which can't perform the underlying I2C operations (because they sleep). + * So we must hand them off to a thread (workqueue) and cope with asynch + * completion, potentially including some re-ordering, of these requests. + */ + +static void twl4030_sih_mask(struct irq_data *data) +{ + struct sih_agent *agent = irq_data_get_irq_chip_data(data); + + agent->imr |= BIT(data->irq - agent->irq_base); + agent->imr_change_pending = true; +} + +static void twl4030_sih_unmask(struct irq_data *data) +{ + struct sih_agent *agent = irq_data_get_irq_chip_data(data); + + agent->imr &= ~BIT(data->irq - agent->irq_base); + agent->imr_change_pending = true; +} + +static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger) +{ + struct sih_agent *agent = irq_data_get_irq_chip_data(data); + + if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + return -EINVAL; + + if (irqd_get_trigger_type(data) != trigger) + agent->edge_change |= BIT(data->irq - agent->irq_base); + + return 0; +} + +static void twl4030_sih_bus_lock(struct irq_data *data) +{ + struct sih_agent *agent = irq_data_get_irq_chip_data(data); + + mutex_lock(&agent->irq_lock); +} + +static void twl4030_sih_bus_sync_unlock(struct irq_data *data) +{ + struct sih_agent *agent = irq_data_get_irq_chip_data(data); + const struct sih *sih = agent->sih; + int status; + + if (agent->imr_change_pending) { + union { + u32 word; + u8 bytes[4]; + } imr; + + /* byte[0] gets overwritten as we write ... */ + imr.word = cpu_to_le32(agent->imr); + agent->imr_change_pending = false; + + /* write the whole mask ... simpler than subsetting it */ + status = twl_i2c_write(sih->module, imr.bytes, + sih->mask[irq_line].imr_offset, + sih->bytes_ixr); + if (status) + pr_err("twl4030: %s, %s --> %d\n", __func__, + "write", status); + } + + if (agent->edge_change) { + u32 edge_change; + u8 bytes[6]; + + edge_change = agent->edge_change; + agent->edge_change = 0; + + /* + * Read, reserving first byte for write scratch. Yes, this + * could be cached for some speedup ... but be careful about + * any processor on the other IRQ line, EDR registers are + * shared. + */ + status = twl_i2c_read(sih->module, bytes, + sih->edr_offset, sih->bytes_edr); + if (status) { + pr_err("twl4030: %s, %s --> %d\n", __func__, + "read", status); + return; + } + + /* Modify only the bits we know must change */ + while (edge_change) { + int i = fls(edge_change) - 1; + int byte = i >> 2; + int off = (i & 0x3) * 2; + unsigned int type; + + bytes[byte] &= ~(0x03 << off); + + type = irq_get_trigger_type(i + agent->irq_base); + if (type & IRQ_TYPE_EDGE_RISING) + bytes[byte] |= BIT(off + 1); + if (type & IRQ_TYPE_EDGE_FALLING) + bytes[byte] |= BIT(off + 0); + + edge_change &= ~BIT(i); + } + + /* Write */ + status = twl_i2c_write(sih->module, bytes, + sih->edr_offset, sih->bytes_edr); + if (status) + pr_err("twl4030: %s, %s --> %d\n", __func__, + "write", status); + } + + mutex_unlock(&agent->irq_lock); +} + +static struct irq_chip twl4030_sih_irq_chip = { + .name = "twl4030", + .irq_mask = twl4030_sih_mask, + .irq_unmask = twl4030_sih_unmask, + .irq_set_type = twl4030_sih_set_type, + .irq_bus_lock = twl4030_sih_bus_lock, + .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock, + .flags = IRQCHIP_SKIP_SET_WAKE, +}; + +/*----------------------------------------------------------------------*/ + +static inline int sih_read_isr(const struct sih *sih) +{ + int status; + union { + u8 bytes[4]; + u32 word; + } isr; + + /* FIXME need retry-on-error ... */ + + isr.word = 0; + status = twl_i2c_read(sih->module, isr.bytes, + sih->mask[irq_line].isr_offset, sih->bytes_ixr); + + return (status < 0) ? status : le32_to_cpu(isr.word); +} + +/* + * Generic handler for SIH interrupts ... we "know" this is called + * in task context, with IRQs enabled. + */ +static irqreturn_t handle_twl4030_sih(int irq, void *data) +{ + struct sih_agent *agent = irq_get_handler_data(irq); + const struct sih *sih = agent->sih; + int isr; + + /* reading ISR acks the IRQs, using clear-on-read mode */ + isr = sih_read_isr(sih); + + if (isr < 0) { + pr_err("twl4030: %s SIH, read ISR error %d\n", + sih->name, isr); + /* REVISIT: recover; eventually mask it all, etc */ + return IRQ_HANDLED; + } + + while (isr) { + irq = fls(isr); + irq--; + isr &= ~BIT(irq); + + if (irq < sih->bits) + handle_nested_irq(agent->irq_base + irq); + else + pr_err("twl4030: %s SIH, invalid ISR bit %d\n", + sih->name, irq); + } + return IRQ_HANDLED; +} + +/* returns the first IRQ used by this SIH bank, or negative errno */ +int twl4030_sih_setup(struct device *dev, int module, int irq_base) +{ + int sih_mod; + const struct sih *sih = NULL; + struct sih_agent *agent; + int i, irq; + int status = -EINVAL; + + /* only support modules with standard clear-on-read for now */ + for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules; + sih_mod++, sih++) { + if (sih->module == module && sih->set_cor) { + status = 0; + break; + } + } + + if (status < 0) + return status; + + agent = kzalloc(sizeof(*agent), GFP_KERNEL); + if (!agent) + return -ENOMEM; + + agent->irq_base = irq_base; + agent->sih = sih; + agent->imr = ~0; + mutex_init(&agent->irq_lock); + + for (i = 0; i < sih->bits; i++) { + irq = irq_base + i; + + irq_set_chip_data(irq, agent); + irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip, + handle_edge_irq); + irq_set_nested_thread(irq, 1); + activate_irq(irq); + } + + /* replace generic PIH handler (handle_simple_irq) */ + irq = sih_mod + twl4030_irq_base; + irq_set_handler_data(irq, agent); + agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name); + status = request_threaded_irq(irq, NULL, handle_twl4030_sih, + IRQF_EARLY_RESUME, + agent->irq_name ?: sih->name, NULL); + + dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name, + irq, irq_base, irq_base + i - 1); + + return status < 0 ? status : irq_base; +} + +/* FIXME need a call to reverse twl4030_sih_setup() ... */ + +/*----------------------------------------------------------------------*/ + +/* FIXME pass in which interrupt line we'll use ... */ +#define twl_irq_line 0 + +int twl4030_init_irq(struct device *dev, int irq_num) +{ + static struct irq_chip twl4030_irq_chip; + int status, i; + int irq_base, irq_end, nr_irqs; + struct device_node *node = dev->of_node; + + /* + * TWL core and pwr interrupts must be contiguous because + * the hwirqs numbers are defined contiguously from 1 to 15. + * Create only one domain for both. + */ + nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS; + + irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); + if (IS_ERR_VALUE(irq_base)) { + dev_err(dev, "Fail to allocate IRQ descs\n"); + return irq_base; + } + + irq_domain_add_legacy(node, nr_irqs, irq_base, 0, + &irq_domain_simple_ops, NULL); + + irq_end = irq_base + TWL4030_CORE_NR_IRQS; + + /* + * Mask and clear all TWL4030 interrupts since initially we do + * not have any TWL4030 module interrupt handlers present + */ + status = twl4030_init_sih_modules(twl_irq_line); + if (status < 0) + return status; + + twl4030_irq_base = irq_base; + + /* + * Install an irq handler for each of the SIH modules; + * clone dummy irq_chip since PIH can't *do* anything + */ + twl4030_irq_chip = dummy_irq_chip; + twl4030_irq_chip.name = "twl4030"; + + twl4030_sih_irq_chip.irq_ack = dummy_irq_chip.irq_ack; + + for (i = irq_base; i < irq_end; i++) { + irq_set_chip_and_handler(i, &twl4030_irq_chip, + handle_simple_irq); + irq_set_nested_thread(i, 1); + activate_irq(i); + } + + dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH", + irq_num, irq_base, irq_end); + + /* ... and the PWR_INT module ... */ + status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end); + if (status < 0) { + dev_err(dev, "sih_setup PWR INT --> %d\n", status); + goto fail; + } + + /* install an irq handler to demultiplex the TWL4030 interrupt */ + status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, + IRQF_ONESHOT, + "TWL4030-PIH", NULL); + if (status < 0) { + dev_err(dev, "could not claim irq%d: %d\n", irq_num, status); + goto fail_rqirq; + } + enable_irq_wake(irq_num); + + return irq_base; +fail_rqirq: + /* clean up twl4030_sih_setup */ +fail: + for (i = irq_base; i < irq_end; i++) { + irq_set_nested_thread(i, 0); + irq_set_chip_and_handler(i, NULL, NULL); + } + + return status; +} + +int twl4030_exit_irq(void) +{ + /* FIXME undo twl_init_irq() */ + if (twl4030_irq_base) { + pr_err("twl4030: can't yet clean up IRQs?\n"); + return -ENOSYS; + } + return 0; +} + +int twl4030_init_chip_irq(const char *chip) +{ + if (!strcmp(chip, "twl5031")) { + sih_modules = sih_modules_twl5031; + nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031); + } else { + sih_modules = sih_modules_twl4030; + nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030); + } + + return 0; +}