X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fmedia%2Fusb%2Fdvb-usb-v2%2Fanysee.h;fp=kernel%2Fdrivers%2Fmedia%2Fusb%2Fdvb-usb-v2%2Fanysee.h;h=3ca2bca4ebafacc581bfd3cc3aa17c3d087c209b;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/media/usb/dvb-usb-v2/anysee.h b/kernel/drivers/media/usb/dvb-usb-v2/anysee.h new file mode 100644 index 000000000..3ca2bca4e --- /dev/null +++ b/kernel/drivers/media/usb/dvb-usb-v2/anysee.h @@ -0,0 +1,330 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This + * module registers serial interface that can be used to communicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#ifndef _DVB_USB_ANYSEE_H_ +#define _DVB_USB_ANYSEE_H_ + +#define DVB_USB_LOG_PREFIX "anysee" +#include "dvb_usb.h" +#include "dvb_ca_en50221.h" + +enum cmd { + CMD_I2C_READ = 0x33, + CMD_I2C_WRITE = 0x31, + CMD_REG_READ = 0xb0, + CMD_REG_WRITE = 0xb1, + CMD_STREAMING_CTRL = 0x12, + CMD_LED_AND_IR_CTRL = 0x16, + CMD_GET_IR_CODE = 0x41, + CMD_GET_HW_INFO = 0x19, + CMD_SMARTCARD = 0x34, + CMD_CI = 0x37, +}; + +struct anysee_state { + u8 buf[64]; + u8 seq; + u8 hw; /* PCB ID */ + #define ANYSEE_I2C_CLIENT_MAX 1 + struct i2c_client *i2c_client[ANYSEE_I2C_CLIENT_MAX]; + u8 fe_id:1; /* frondend ID */ + u8 has_ci:1; + u8 has_tda18212:1; + u8 ci_attached:1; + struct dvb_ca_en50221 ci; + unsigned long ci_cam_ready; /* jiffies */ +}; + +#define ANYSEE_HW_507T 2 /* E30 */ +#define ANYSEE_HW_507CD 6 /* E30 Plus */ +#define ANYSEE_HW_507DC 10 /* E30 C Plus */ +#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */ +#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */ +#define ANYSEE_HW_508TC 18 /* E7 TC */ +#define ANYSEE_HW_508S2 19 /* E7 S2 */ +#define ANYSEE_HW_508T2C 20 /* E7 T2C */ +#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */ +#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */ + +#define REG_IOA 0x80 /* Port A (bit addressable) */ +#define REG_IOB 0x90 /* Port B (bit addressable) */ +#define REG_IOC 0xa0 /* Port C (bit addressable) */ +#define REG_IOD 0xb0 /* Port D (bit addressable) */ +#define REG_IOE 0xb1 /* Port E (NOT bit addressable) */ +#define REG_OEA 0xb2 /* Port A Output Enable */ +#define REG_OEB 0xb3 /* Port B Output Enable */ +#define REG_OEC 0xb4 /* Port C Output Enable */ +#define REG_OED 0xb5 /* Port D Output Enable */ +#define REG_OEE 0xb6 /* Port E Output Enable */ + +#endif + +/*************************************************************************** + * USB API description (reverse engineered) + *************************************************************************** + +Transaction flow: +================= +BULK[00001] >>> REQUEST PACKET 64 bytes +BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY) +BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY) + +General reply packet(s) are always used if not own reply defined. + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY) +============================================================================ +| 00 | reply data (if any) from previous transaction +| | Just same reply packet as returned during previous transaction. +| | Needed only if reply is missed in previous transaction. +| | Just skip normally. +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY) +============================================================================ +| 00 | reply data (if any) +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C WRITE REQUEST PACKET +============================================================================ +| 00 | 0x31 I2C write command +---------------------------------------------------------------------------- +| 01 | i2c address +---------------------------------------------------------------------------- +| 02 | data length +| | 0x02 (for typical I2C reg / val pair) +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04- | data +---------------------------------------------------------------------------- +| -59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C READ REQUEST PACKET +============================================================================ +| 00 | 0x33 I2C read command +---------------------------------------------------------------------------- +| 01 | i2c address + 1 +---------------------------------------------------------------------------- +| 02 | register +---------------------------------------------------------------------------- +| 03 | 0x00 +---------------------------------------------------------------------------- +| 04 | 0x00 +---------------------------------------------------------------------------- +| 05 | data length +---------------------------------------------------------------------------- +| 06-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET +============================================================================ +| 00 | 0xb1 register write command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04 | value +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET +============================================================================ +| 00 | 0xb0 register read command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | LED CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x01 (LED) +---------------------------------------------------------------------------- +| 03 | 0x00 blink +| | 0x01 lights continuously +---------------------------------------------------------------------------- +| 04 | blink interval +| | 0x00 fastest (looks like LED lights continuously) +| | 0xff slowest +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | IR CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x02 (IR) +---------------------------------------------------------------------------- +| 03 | 0x00 IR disabled +| | 0x01 IR enabled +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | STREAMING CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x12 streaming control command +---------------------------------------------------------------------------- +| 01 | 0x00 streaming disabled +| | 0x01 streaming enabled +---------------------------------------------------------------------------- +| 02 | 0x00 +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x41 remote control command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REPLY PACKET +============================================================================ +| 00 | 0x00 code not received +| | 0x01 code received +---------------------------------------------------------------------------- +| 01 | remote control code +---------------------------------------------------------------------------- +| 02-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REQUEST PACKET +============================================================================ +| 00 | 0x19 get hardware info command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REPLY PACKET +============================================================================ +| 00 | hardware id +---------------------------------------------------------------------------- +| 01-02 | firmware version +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | SMART CARD READER PACKET +============================================================================ +| 00 | 0x34 smart card reader command +---------------------------------------------------------------------------- +| xx | +---------------------------------------------------------------------------- +| xx-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +*/