X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fleds%2Fleds-lp5523.c;fp=kernel%2Fdrivers%2Fleds%2Fleds-lp5523.c;h=9e1716f8098ca2b95aa9e558b912968af8d1e2ed;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/leds/leds-lp5523.c b/kernel/drivers/leds/leds-lp5523.c new file mode 100644 index 000000000..9e1716f80 --- /dev/null +++ b/kernel/drivers/leds/leds-lp5523.c @@ -0,0 +1,839 @@ +/* + * lp5523.c - LP5523, LP55231 LED Driver + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2012 Texas Instruments + * + * Contact: Samu Onkalo + * Milo(Woogyom) Kim + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "leds-lp55xx-common.h" + +#define LP5523_PROGRAM_LENGTH 32 /* bytes */ +/* Memory is used like this: + 0x00 engine 1 program + 0x10 engine 2 program + 0x20 engine 3 program + 0x30 engine 1 muxing info + 0x40 engine 2 muxing info + 0x50 engine 3 muxing info +*/ +#define LP5523_MAX_LEDS 9 + +/* Registers */ +#define LP5523_REG_ENABLE 0x00 +#define LP5523_REG_OP_MODE 0x01 +#define LP5523_REG_ENABLE_LEDS_MSB 0x04 +#define LP5523_REG_ENABLE_LEDS_LSB 0x05 +#define LP5523_REG_LED_PWM_BASE 0x16 +#define LP5523_REG_LED_CURRENT_BASE 0x26 +#define LP5523_REG_CONFIG 0x36 +#define LP5523_REG_STATUS 0x3A +#define LP5523_REG_RESET 0x3D +#define LP5523_REG_LED_TEST_CTRL 0x41 +#define LP5523_REG_LED_TEST_ADC 0x42 +#define LP5523_REG_CH1_PROG_START 0x4C +#define LP5523_REG_CH2_PROG_START 0x4D +#define LP5523_REG_CH3_PROG_START 0x4E +#define LP5523_REG_PROG_PAGE_SEL 0x4F +#define LP5523_REG_PROG_MEM 0x50 + +/* Bit description in registers */ +#define LP5523_ENABLE 0x40 +#define LP5523_AUTO_INC 0x40 +#define LP5523_PWR_SAVE 0x20 +#define LP5523_PWM_PWR_SAVE 0x04 +#define LP5523_CP_AUTO 0x18 +#define LP5523_AUTO_CLK 0x02 + +#define LP5523_EN_LEDTEST 0x80 +#define LP5523_LEDTEST_DONE 0x80 +#define LP5523_RESET 0xFF +#define LP5523_ADC_SHORTCIRC_LIM 80 +#define LP5523_EXT_CLK_USED 0x08 +#define LP5523_ENG_STATUS_MASK 0x07 + +/* Memory Page Selection */ +#define LP5523_PAGE_ENG1 0 +#define LP5523_PAGE_ENG2 1 +#define LP5523_PAGE_ENG3 2 +#define LP5523_PAGE_MUX1 3 +#define LP5523_PAGE_MUX2 4 +#define LP5523_PAGE_MUX3 5 + +/* Program Memory Operations */ +#define LP5523_MODE_ENG1_M 0x30 /* Operation Mode Register */ +#define LP5523_MODE_ENG2_M 0x0C +#define LP5523_MODE_ENG3_M 0x03 +#define LP5523_LOAD_ENG1 0x10 +#define LP5523_LOAD_ENG2 0x04 +#define LP5523_LOAD_ENG3 0x01 + +#define LP5523_ENG1_IS_LOADING(mode) \ + ((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1) +#define LP5523_ENG2_IS_LOADING(mode) \ + ((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2) +#define LP5523_ENG3_IS_LOADING(mode) \ + ((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3) + +#define LP5523_EXEC_ENG1_M 0x30 /* Enable Register */ +#define LP5523_EXEC_ENG2_M 0x0C +#define LP5523_EXEC_ENG3_M 0x03 +#define LP5523_EXEC_M 0x3F +#define LP5523_RUN_ENG1 0x20 +#define LP5523_RUN_ENG2 0x08 +#define LP5523_RUN_ENG3 0x02 + +#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led))) + +enum lp5523_chip_id { + LP5523, + LP55231, +}; + +static int lp5523_init_program_engine(struct lp55xx_chip *chip); + +static inline void lp5523_wait_opmode_done(void) +{ + usleep_range(1000, 2000); +} + +static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current) +{ + led->led_current = led_current; + lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr, + led_current); +} + +static int lp5523_post_init_device(struct lp55xx_chip *chip) +{ + int ret; + + ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE); + if (ret) + return ret; + + /* Chip startup time is 500 us, 1 - 2 ms gives some margin */ + usleep_range(1000, 2000); + + ret = lp55xx_write(chip, LP5523_REG_CONFIG, + LP5523_AUTO_INC | LP5523_PWR_SAVE | + LP5523_CP_AUTO | LP5523_AUTO_CLK | + LP5523_PWM_PWR_SAVE); + if (ret) + return ret; + + /* turn on all leds */ + ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01); + if (ret) + return ret; + + ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff); + if (ret) + return ret; + + return lp5523_init_program_engine(chip); +} + +static void lp5523_load_engine(struct lp55xx_chip *chip) +{ + enum lp55xx_engine_index idx = chip->engine_idx; + u8 mask[] = { + [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M, + [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M, + [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M, + }; + + u8 val[] = { + [LP55XX_ENGINE_1] = LP5523_LOAD_ENG1, + [LP55XX_ENGINE_2] = LP5523_LOAD_ENG2, + [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3, + }; + + lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]); + + lp5523_wait_opmode_done(); +} + +static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip) +{ + enum lp55xx_engine_index idx = chip->engine_idx; + u8 page_sel[] = { + [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1, + [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2, + [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3, + }; + + lp5523_load_engine(chip); + + lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]); +} + +static void lp5523_stop_all_engines(struct lp55xx_chip *chip) +{ + lp55xx_write(chip, LP5523_REG_OP_MODE, 0); + lp5523_wait_opmode_done(); +} + +static void lp5523_stop_engine(struct lp55xx_chip *chip) +{ + enum lp55xx_engine_index idx = chip->engine_idx; + u8 mask[] = { + [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M, + [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M, + [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M, + }; + + lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], 0); + + lp5523_wait_opmode_done(); +} + +static void lp5523_turn_off_channels(struct lp55xx_chip *chip) +{ + int i; + + for (i = 0; i < LP5523_MAX_LEDS; i++) + lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0); +} + +static void lp5523_run_engine(struct lp55xx_chip *chip, bool start) +{ + int ret; + u8 mode; + u8 exec; + + /* stop engine */ + if (!start) { + lp5523_stop_engine(chip); + lp5523_turn_off_channels(chip); + return; + } + + /* + * To run the engine, + * operation mode and enable register should updated at the same time + */ + + ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode); + if (ret) + return; + + ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec); + if (ret) + return; + + /* change operation mode to RUN only when each engine is loading */ + if (LP5523_ENG1_IS_LOADING(mode)) { + mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1; + exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1; + } + + if (LP5523_ENG2_IS_LOADING(mode)) { + mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2; + exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2; + } + + if (LP5523_ENG3_IS_LOADING(mode)) { + mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3; + exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3; + } + + lp55xx_write(chip, LP5523_REG_OP_MODE, mode); + lp5523_wait_opmode_done(); + + lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec); +} + +static int lp5523_init_program_engine(struct lp55xx_chip *chip) +{ + int i; + int j; + int ret; + u8 status; + /* one pattern per engine setting LED MUX start and stop addresses */ + static const u8 pattern[][LP5523_PROGRAM_LENGTH] = { + { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0}, + { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0}, + { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0}, + }; + + /* hardcode 32 bytes of memory for each engine from program memory */ + ret = lp55xx_write(chip, LP5523_REG_CH1_PROG_START, 0x00); + if (ret) + return ret; + + ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, 0x10); + if (ret) + return ret; + + ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, 0x20); + if (ret) + return ret; + + /* write LED MUX address space for each engine */ + for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) { + chip->engine_idx = i; + lp5523_load_engine_and_select_page(chip); + + for (j = 0; j < LP5523_PROGRAM_LENGTH; j++) { + ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + j, + pattern[i - 1][j]); + if (ret) + goto out; + } + } + + lp5523_run_engine(chip, true); + + /* Let the programs run for couple of ms and check the engine status */ + usleep_range(3000, 6000); + lp55xx_read(chip, LP5523_REG_STATUS, &status); + status &= LP5523_ENG_STATUS_MASK; + + if (status != LP5523_ENG_STATUS_MASK) { + dev_err(&chip->cl->dev, + "cound not configure LED engine, status = 0x%.2x\n", + status); + ret = -1; + } + +out: + lp5523_stop_all_engines(chip); + return ret; +} + +static int lp5523_update_program_memory(struct lp55xx_chip *chip, + const u8 *data, size_t size) +{ + u8 pattern[LP5523_PROGRAM_LENGTH] = {0}; + unsigned cmd; + char c[3]; + int nrchars; + int ret; + int offset = 0; + int i = 0; + + while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) { + /* separate sscanfs because length is working only for %s */ + ret = sscanf(data + offset, "%2s%n ", c, &nrchars); + if (ret != 1) + goto err; + + ret = sscanf(c, "%2x", &cmd); + if (ret != 1) + goto err; + + pattern[i] = (u8)cmd; + offset += nrchars; + i++; + } + + /* Each instruction is 16bit long. Check that length is even */ + if (i % 2) + goto err; + + for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) { + ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]); + if (ret) + return -EINVAL; + } + + return size; + +err: + dev_err(&chip->cl->dev, "wrong pattern format\n"); + return -EINVAL; +} + +static void lp5523_firmware_loaded(struct lp55xx_chip *chip) +{ + const struct firmware *fw = chip->fw; + + if (fw->size > LP5523_PROGRAM_LENGTH) { + dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n", + fw->size); + return; + } + + /* + * Program momery sequence + * 1) set engine mode to "LOAD" + * 2) write firmware data into program memory + */ + + lp5523_load_engine_and_select_page(chip); + lp5523_update_program_memory(chip, fw->data, fw->size); +} + +static ssize_t show_engine_mode(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode; + + switch (mode) { + case LP55XX_ENGINE_RUN: + return sprintf(buf, "run\n"); + case LP55XX_ENGINE_LOAD: + return sprintf(buf, "load\n"); + case LP55XX_ENGINE_DISABLED: + default: + return sprintf(buf, "disabled\n"); + } +} +show_mode(1) +show_mode(2) +show_mode(3) + +static ssize_t store_engine_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + struct lp55xx_engine *engine = &chip->engines[nr - 1]; + + mutex_lock(&chip->lock); + + chip->engine_idx = nr; + + if (!strncmp(buf, "run", 3)) { + lp5523_run_engine(chip, true); + engine->mode = LP55XX_ENGINE_RUN; + } else if (!strncmp(buf, "load", 4)) { + lp5523_stop_engine(chip); + lp5523_load_engine(chip); + engine->mode = LP55XX_ENGINE_LOAD; + } else if (!strncmp(buf, "disabled", 8)) { + lp5523_stop_engine(chip); + engine->mode = LP55XX_ENGINE_DISABLED; + } + + mutex_unlock(&chip->lock); + + return len; +} +store_mode(1) +store_mode(2) +store_mode(3) + +static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len) +{ + u16 tmp_mux = 0; + int i; + + len = min_t(int, len, LP5523_MAX_LEDS); + + for (i = 0; i < len; i++) { + switch (buf[i]) { + case '1': + tmp_mux |= (1 << i); + break; + case '0': + break; + case '\n': + i = len; + break; + default: + return -1; + } + } + *mux = tmp_mux; + + return 0; +} + +static void lp5523_mux_to_array(u16 led_mux, char *array) +{ + int i, pos = 0; + for (i = 0; i < LP5523_MAX_LEDS; i++) + pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i)); + + array[pos] = '\0'; +} + +static ssize_t show_engine_leds(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + char mux[LP5523_MAX_LEDS + 1]; + + lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux); + + return sprintf(buf, "%s\n", mux); +} +show_leds(1) +show_leds(2) +show_leds(3) + +static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr) +{ + struct lp55xx_engine *engine = &chip->engines[nr - 1]; + int ret; + u8 mux_page[] = { + [LP55XX_ENGINE_1] = LP5523_PAGE_MUX1, + [LP55XX_ENGINE_2] = LP5523_PAGE_MUX2, + [LP55XX_ENGINE_3] = LP5523_PAGE_MUX3, + }; + + lp5523_load_engine(chip); + + ret = lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, mux_page[nr]); + if (ret) + return ret; + + ret = lp55xx_write(chip, LP5523_REG_PROG_MEM , (u8)(mux >> 8)); + if (ret) + return ret; + + ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + 1, (u8)(mux)); + if (ret) + return ret; + + engine->led_mux = mux; + return 0; +} + +static ssize_t store_engine_leds(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + struct lp55xx_engine *engine = &chip->engines[nr - 1]; + u16 mux = 0; + ssize_t ret; + + if (lp5523_mux_parse(buf, &mux, len)) + return -EINVAL; + + mutex_lock(&chip->lock); + + chip->engine_idx = nr; + ret = -EINVAL; + + if (engine->mode != LP55XX_ENGINE_LOAD) + goto leave; + + if (lp5523_load_mux(chip, mux, nr)) + goto leave; + + ret = len; +leave: + mutex_unlock(&chip->lock); + return ret; +} +store_leds(1) +store_leds(2) +store_leds(3) + +static ssize_t store_engine_load(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + int ret; + + mutex_lock(&chip->lock); + + chip->engine_idx = nr; + lp5523_load_engine_and_select_page(chip); + ret = lp5523_update_program_memory(chip, buf, len); + + mutex_unlock(&chip->lock); + + return ret; +} +store_load(1) +store_load(2) +store_load(3) + +static ssize_t lp5523_selftest(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + struct lp55xx_platform_data *pdata = chip->pdata; + int i, ret, pos = 0; + u8 status, adc, vdd; + + mutex_lock(&chip->lock); + + ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); + if (ret < 0) + goto fail; + + /* Check that ext clock is really in use if requested */ + if (pdata->clock_mode == LP55XX_CLOCK_EXT) { + if ((status & LP5523_EXT_CLK_USED) == 0) + goto fail; + } + + /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */ + lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16); + usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */ + ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); + if (ret < 0) + goto fail; + + if (!(status & LP5523_LEDTEST_DONE)) + usleep_range(3000, 6000); /* Was not ready. Wait little bit */ + + ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd); + if (ret < 0) + goto fail; + + vdd--; /* There may be some fluctuation in measurement */ + + for (i = 0; i < LP5523_MAX_LEDS; i++) { + /* Skip non-existing channels */ + if (pdata->led_config[i].led_current == 0) + continue; + + /* Set default current */ + lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i, + pdata->led_config[i].led_current); + + lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff); + /* let current stabilize 2 - 4ms before measurements start */ + usleep_range(2000, 4000); + lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, + LP5523_EN_LEDTEST | i); + /* ADC conversion time is 2.7 ms typically */ + usleep_range(3000, 6000); + ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); + if (ret < 0) + goto fail; + + if (!(status & LP5523_LEDTEST_DONE)) + usleep_range(3000, 6000);/* Was not ready. Wait. */ + + ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc); + if (ret < 0) + goto fail; + + if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM) + pos += sprintf(buf + pos, "LED %d FAIL\n", i); + + lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00); + + /* Restore current */ + lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i, + led->led_current); + led++; + } + if (pos == 0) + pos = sprintf(buf, "OK\n"); + goto release_lock; +fail: + pos = sprintf(buf, "FAIL\n"); + +release_lock: + mutex_unlock(&chip->lock); + + return pos; +} + +static void lp5523_led_brightness_work(struct work_struct *work) +{ + struct lp55xx_led *led = container_of(work, struct lp55xx_led, + brightness_work); + struct lp55xx_chip *chip = led->chip; + + mutex_lock(&chip->lock); + lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr, + led->brightness); + mutex_unlock(&chip->lock); +} + +static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode); +static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode); +static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode); +static LP55XX_DEV_ATTR_RW(engine1_leds, show_engine1_leds, store_engine1_leds); +static LP55XX_DEV_ATTR_RW(engine2_leds, show_engine2_leds, store_engine2_leds); +static LP55XX_DEV_ATTR_RW(engine3_leds, show_engine3_leds, store_engine3_leds); +static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load); +static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load); +static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load); +static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest); + +static struct attribute *lp5523_attributes[] = { + &dev_attr_engine1_mode.attr, + &dev_attr_engine2_mode.attr, + &dev_attr_engine3_mode.attr, + &dev_attr_engine1_load.attr, + &dev_attr_engine2_load.attr, + &dev_attr_engine3_load.attr, + &dev_attr_engine1_leds.attr, + &dev_attr_engine2_leds.attr, + &dev_attr_engine3_leds.attr, + &dev_attr_selftest.attr, + NULL, +}; + +static const struct attribute_group lp5523_group = { + .attrs = lp5523_attributes, +}; + +/* Chip specific configurations */ +static struct lp55xx_device_config lp5523_cfg = { + .reset = { + .addr = LP5523_REG_RESET, + .val = LP5523_RESET, + }, + .enable = { + .addr = LP5523_REG_ENABLE, + .val = LP5523_ENABLE, + }, + .max_channel = LP5523_MAX_LEDS, + .post_init_device = lp5523_post_init_device, + .brightness_work_fn = lp5523_led_brightness_work, + .set_led_current = lp5523_set_led_current, + .firmware_cb = lp5523_firmware_loaded, + .run_engine = lp5523_run_engine, + .dev_attr_group = &lp5523_group, +}; + +static int lp5523_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct lp55xx_chip *chip; + struct lp55xx_led *led; + struct lp55xx_platform_data *pdata; + struct device_node *np = client->dev.of_node; + + if (!dev_get_platdata(&client->dev)) { + if (np) { + ret = lp55xx_of_populate_pdata(&client->dev, np); + if (ret < 0) + return ret; + } else { + dev_err(&client->dev, "no platform data\n"); + return -EINVAL; + } + } + pdata = dev_get_platdata(&client->dev); + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + led = devm_kzalloc(&client->dev, + sizeof(*led) * pdata->num_channels, GFP_KERNEL); + if (!led) + return -ENOMEM; + + chip->cl = client; + chip->pdata = pdata; + chip->cfg = &lp5523_cfg; + + mutex_init(&chip->lock); + + i2c_set_clientdata(client, led); + + ret = lp55xx_init_device(chip); + if (ret) + goto err_init; + + dev_info(&client->dev, "%s Programmable led chip found\n", id->name); + + ret = lp55xx_register_leds(led, chip); + if (ret) + goto err_register_leds; + + ret = lp55xx_register_sysfs(chip); + if (ret) { + dev_err(&client->dev, "registering sysfs failed\n"); + goto err_register_sysfs; + } + + return 0; + +err_register_sysfs: + lp55xx_unregister_leds(led, chip); +err_register_leds: + lp55xx_deinit_device(chip); +err_init: + return ret; +} + +static int lp5523_remove(struct i2c_client *client) +{ + struct lp55xx_led *led = i2c_get_clientdata(client); + struct lp55xx_chip *chip = led->chip; + + lp5523_stop_all_engines(chip); + lp55xx_unregister_sysfs(chip); + lp55xx_unregister_leds(led, chip); + lp55xx_deinit_device(chip); + + return 0; +} + +static const struct i2c_device_id lp5523_id[] = { + { "lp5523", LP5523 }, + { "lp55231", LP55231 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, lp5523_id); + +#ifdef CONFIG_OF +static const struct of_device_id of_lp5523_leds_match[] = { + { .compatible = "national,lp5523", }, + { .compatible = "ti,lp55231", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, of_lp5523_leds_match); +#endif + +static struct i2c_driver lp5523_driver = { + .driver = { + .name = "lp5523x", + .of_match_table = of_match_ptr(of_lp5523_leds_match), + }, + .probe = lp5523_probe, + .remove = lp5523_remove, + .id_table = lp5523_id, +}; + +module_i2c_driver(lp5523_driver); + +MODULE_AUTHOR("Mathias Nyman "); +MODULE_AUTHOR("Milo Kim "); +MODULE_DESCRIPTION("LP5523 LED engine"); +MODULE_LICENSE("GPL");