X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Finput%2Fmisc%2FKconfig;fp=kernel%2Fdrivers%2Finput%2Fmisc%2FKconfig;h=d6d16fa782815481e04609771b09b32e862ce679;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=4436ab1b9735d608821309eea92b486a1bc147e2;hpb=f93b97fd65072de626c074dbe099a1fff05ce060;p=kvmfornfv.git

diff --git a/kernel/drivers/input/misc/Kconfig b/kernel/drivers/input/misc/Kconfig
index 4436ab1b9..d6d16fa78 100644
--- a/kernel/drivers/input/misc/Kconfig
+++ b/kernel/drivers/input/misc/Kconfig
@@ -94,11 +94,11 @@ config INPUT_BMA150
 	  module will be called bma150.
 
 config INPUT_E3X0_BUTTON
-	tristate "NI Ettus Research USRP E3x0 Button support."
+	tristate "NI Ettus Research USRP E3xx Button support."
 	default n
 	help
 	  Say Y here to enable support for the NI Ettus Research
-	  USRP E3x0 Button.
+	  USRP E3xx Button.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called e3x0_button.
@@ -167,28 +167,16 @@ config INPUT_M68K_BEEP
 	depends on M68K
 
 config INPUT_MAX77693_HAPTIC
-	tristate "MAXIM MAX77693 haptic controller support"
-	depends on MFD_MAX77693 && PWM
+	tristate "MAXIM MAX77693/MAX77843 haptic controller support"
+	depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
 	select INPUT_FF_MEMLESS
 	help
 	  This option enables support for the haptic controller on
-	  MAXIM MAX77693 chip.
+	  MAXIM MAX77693 and MAX77843 chips.
 
 	  To compile this driver as module, choose M here: the
 	  module will be called max77693-haptic.
 
-config INPUT_MAX77843_HAPTIC
-    tristate "MAXIM MAX77843 haptic controller support"
-    depends on MFD_MAX77843 && REGULATOR
-    select INPUT_FF_MEMLESS
-    help
-      This option enables support for the haptic controller on
-      MAXIM MAX77843 chip. The driver supports ff-memless interface
-      from input framework.
-
-      To compile this driver as module, choose M here: the
-      module will be called max77843-haptic.
-
 config INPUT_MAX8925_ONKEY
 	tristate "MAX8925 ONKEY support"
 	depends on MFD_MAX8925
@@ -259,7 +247,7 @@ config INPUT_APANEL
 config INPUT_GP2A
 	tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
 	depends on I2C
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
 	  hooked to an I2C bus.
@@ -269,7 +257,7 @@ config INPUT_GP2A
 
 config INPUT_GPIO_BEEPER
 	tristate "Generic GPIO Beeper support"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y here if you have a beeper connected to a GPIO pin.
 
@@ -278,7 +266,7 @@ config INPUT_GPIO_BEEPER
 
 config INPUT_GPIO_TILT_POLLED
 	tristate "Polled GPIO tilt switch"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	select INPUT_POLLDEV
 	help
 	  This driver implements support for tilt switches connected
@@ -569,7 +557,7 @@ config INPUT_PWM_BEEPER
 
 config INPUT_GPIO_ROTARY_ENCODER
 	tristate "Rotary encoders connected to GPIO pins"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y here to add support for rotary encoders connected to GPIO lines.
 	  Check file:Documentation/input/rotary-encoder.txt for more
@@ -610,6 +598,16 @@ config INPUT_DA9055_ONKEY
 	  To compile this driver as a module, choose M here: the module
 	  will be called da9055_onkey.
 
+config INPUT_DA9063_ONKEY
+	tristate "Dialog DA9062/63 OnKey"
+	depends on MFD_DA9063 || MFD_DA9062
+	help
+	  Support the ONKEY of Dialog DA9063 and DA9062 Power Management ICs
+	  as an input device capable of reporting the power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called da9063_onkey.
+
 config INPUT_DM355EVM
 	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
 	depends on MFD_DM355EVM_MSP
@@ -766,7 +764,8 @@ config INPUT_SOC_BUTTON_ARRAY
 
 config INPUT_DRV260X_HAPTICS
 	tristate "TI DRV260X haptics support"
-	depends on INPUT && I2C && GPIOLIB
+	depends on INPUT && I2C
+	depends on GPIOLIB || COMPILE_TEST
 	select INPUT_FF_MEMLESS
 	select REGMAP_I2C
 	help
@@ -775,6 +774,17 @@ config INPUT_DRV260X_HAPTICS
 	  To compile this driver as a module, choose M here: the
 	  module will be called drv260x-haptics.
 
+config INPUT_DRV2665_HAPTICS
+	tristate "TI DRV2665 haptics support"
+	depends on INPUT && I2C
+	select INPUT_FF_MEMLESS
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI DRV2665 haptics driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called drv2665-haptics.
+
 config INPUT_DRV2667_HAPTICS
 	tristate "TI DRV2667 haptics support"
 	depends on INPUT && I2C
@@ -784,6 +794,6 @@ config INPUT_DRV2667_HAPTICS
 	  Say Y to enable support for the TI DRV2667 haptics driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called drv260x-haptics.
+	  module will be called drv2667-haptics.
 
 endif