X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fi2c%2Fbusses%2Fi2c-amd756.c;fp=kernel%2Fdrivers%2Fi2c%2Fbusses%2Fi2c-amd756.c;h=6c7113d990f882a758435eb78fc172510a6faed6;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/i2c/busses/i2c-amd756.c b/kernel/drivers/i2c/busses/i2c-amd756.c new file mode 100644 index 000000000..6c7113d99 --- /dev/null +++ b/kernel/drivers/i2c/busses/i2c-amd756.c @@ -0,0 +1,413 @@ +/* + Copyright (c) 1999-2002 Merlin Hughes + + Shamelessly ripped from i2c-piix4.c: + + Copyright (c) 1998, 1999 Frodo Looijaard and + Philip Edelbrock + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. +*/ + +/* + 2002-04-08: Added nForce support. (Csaba Halasz) + 2002-10-03: Fixed nForce PnP I/O port. (Michael Steil) + 2002-12-28: Rewritten into something that resembles a Linux driver (hch) + 2003-11-29: Added back AMD8111 removed by the previous rewrite. + (Philip Pokorny) +*/ + +/* + Supports AMD756, AMD766, AMD768, AMD8111 and nVidia nForce + Note: we assume there can only be one device, with one SMBus interface. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* AMD756 SMBus address offsets */ +#define SMB_ADDR_OFFSET 0xE0 +#define SMB_IOSIZE 16 +#define SMB_GLOBAL_STATUS (0x0 + amd756_ioport) +#define SMB_GLOBAL_ENABLE (0x2 + amd756_ioport) +#define SMB_HOST_ADDRESS (0x4 + amd756_ioport) +#define SMB_HOST_DATA (0x6 + amd756_ioport) +#define SMB_HOST_COMMAND (0x8 + amd756_ioport) +#define SMB_HOST_BLOCK_DATA (0x9 + amd756_ioport) +#define SMB_HAS_DATA (0xA + amd756_ioport) +#define SMB_HAS_DEVICE_ADDRESS (0xC + amd756_ioport) +#define SMB_HAS_HOST_ADDRESS (0xE + amd756_ioport) +#define SMB_SNOOP_ADDRESS (0xF + amd756_ioport) + +/* PCI Address Constants */ + +/* address of I/O space */ +#define SMBBA 0x058 /* mh */ +#define SMBBANFORCE 0x014 + +/* general configuration */ +#define SMBGCFG 0x041 /* mh */ + +/* silicon revision code */ +#define SMBREV 0x008 + +/* Other settings */ +#define MAX_TIMEOUT 500 + +/* AMD756 constants */ +#define AMD756_QUICK 0x00 +#define AMD756_BYTE 0x01 +#define AMD756_BYTE_DATA 0x02 +#define AMD756_WORD_DATA 0x03 +#define AMD756_PROCESS_CALL 0x04 +#define AMD756_BLOCK_DATA 0x05 + +static struct pci_driver amd756_driver; +static unsigned short amd756_ioport; + +/* + SMBUS event = I/O 28-29 bit 11 + see E0 for the status bits and enabled in E2 + +*/ +#define GS_ABRT_STS (1 << 0) +#define GS_COL_STS (1 << 1) +#define GS_PRERR_STS (1 << 2) +#define GS_HST_STS (1 << 3) +#define GS_HCYC_STS (1 << 4) +#define GS_TO_STS (1 << 5) +#define GS_SMB_STS (1 << 11) + +#define GS_CLEAR_STS (GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \ + GS_HCYC_STS | GS_TO_STS ) + +#define GE_CYC_TYPE_MASK (7) +#define GE_HOST_STC (1 << 3) +#define GE_ABORT (1 << 5) + + +static int amd756_transaction(struct i2c_adapter *adap) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&adap->dev, "Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, " + "DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS), + inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS), + inb_p(SMB_HOST_DATA)); + + /* Make sure the SMBus host is ready to start transmitting */ + if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) { + dev_dbg(&adap->dev, "SMBus busy (%04x). Waiting...\n", temp); + do { + msleep(1); + temp = inw_p(SMB_GLOBAL_STATUS); + } while ((temp & (GS_HST_STS | GS_SMB_STS)) && + (timeout++ < MAX_TIMEOUT)); + /* If the SMBus is still busy, we give up */ + if (timeout > MAX_TIMEOUT) { + dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp); + goto abort; + } + timeout = 0; + } + + /* start the transaction by setting the start bit */ + outw_p(inw(SMB_GLOBAL_ENABLE) | GE_HOST_STC, SMB_GLOBAL_ENABLE); + + /* We will always wait for a fraction of a second! */ + do { + msleep(1); + temp = inw_p(SMB_GLOBAL_STATUS); + } while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout > MAX_TIMEOUT) { + dev_dbg(&adap->dev, "Completion timeout!\n"); + goto abort; + } + + if (temp & GS_PRERR_STS) { + result = -ENXIO; + dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n"); + } + + if (temp & GS_COL_STS) { + result = -EIO; + dev_warn(&adap->dev, "SMBus collision!\n"); + } + + if (temp & GS_TO_STS) { + result = -ETIMEDOUT; + dev_dbg(&adap->dev, "SMBus protocol timeout!\n"); + } + + if (temp & GS_HCYC_STS) + dev_dbg(&adap->dev, "SMBus protocol success!\n"); + + outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS); + +#ifdef DEBUG + if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) { + dev_dbg(&adap->dev, + "Failed reset at end of transaction (%04x)\n", temp); + } +#endif + + dev_dbg(&adap->dev, + "Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n", + inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE), + inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA)); + + return result; + + abort: + dev_warn(&adap->dev, "Sending abort\n"); + outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE); + msleep(100); + outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS); + return -EIO; +} + +/* Return negative errno on error. */ +static s32 amd756_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data * data) +{ + int i, len; + int status; + + switch (size) { + case I2C_SMBUS_QUICK: + outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMB_HOST_ADDRESS); + size = AMD756_QUICK; + break; + case I2C_SMBUS_BYTE: + outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMB_HOST_ADDRESS); + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMB_HOST_DATA); + size = AMD756_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMB_HOST_ADDRESS); + outb_p(command, SMB_HOST_COMMAND); + if (read_write == I2C_SMBUS_WRITE) + outw_p(data->byte, SMB_HOST_DATA); + size = AMD756_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMB_HOST_ADDRESS); + outb_p(command, SMB_HOST_COMMAND); + if (read_write == I2C_SMBUS_WRITE) + outw_p(data->word, SMB_HOST_DATA); /* TODO: endian???? */ + size = AMD756_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMB_HOST_ADDRESS); + outb_p(command, SMB_HOST_COMMAND); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 0) + len = 0; + if (len > 32) + len = 32; + outw_p(len, SMB_HOST_DATA); + /* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */ + for (i = 1; i <= len; i++) + outb_p(data->block[i], + SMB_HOST_BLOCK_DATA); + } + size = AMD756_BLOCK_DATA; + break; + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; + } + + /* How about enabling interrupts... */ + outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE); + + status = amd756_transaction(adap); + if (status) + return status; + + if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK)) + return 0; + + + switch (size) { + case AMD756_BYTE: + data->byte = inw_p(SMB_HOST_DATA); + break; + case AMD756_BYTE_DATA: + data->byte = inw_p(SMB_HOST_DATA); + break; + case AMD756_WORD_DATA: + data->word = inw_p(SMB_HOST_DATA); /* TODO: endian???? */ + break; + case AMD756_BLOCK_DATA: + data->block[0] = inw_p(SMB_HOST_DATA) & 0x3f; + if(data->block[0] > 32) + data->block[0] = 32; + /* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */ + for (i = 1; i <= data->block[0]; i++) + data->block[i] = inb_p(SMB_HOST_BLOCK_DATA); + break; + } + + return 0; +} + +static u32 amd756_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static const struct i2c_algorithm smbus_algorithm = { + .smbus_xfer = amd756_access, + .functionality = amd756_func, +}; + +struct i2c_adapter amd756_smbus = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, + .algo = &smbus_algorithm, +}; + +enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 }; +static const char* chipname[] = { + "AMD756", "AMD766", "AMD768", + "nVidia nForce", "AMD8111", +}; + +static const struct pci_device_id amd756_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B), + .driver_data = AMD756 }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413), + .driver_data = AMD766 }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7443), + .driver_data = AMD768 }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), + .driver_data = AMD8111 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS), + .driver_data = NFORCE }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, amd756_ids); + +static int amd756_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int nforce = (id->driver_data == NFORCE); + int error; + u8 temp; + + if (amd756_ioport) { + dev_err(&pdev->dev, "Only one device supported " + "(you have a strange motherboard, btw)\n"); + return -ENODEV; + } + + if (nforce) { + if (PCI_FUNC(pdev->devfn) != 1) + return -ENODEV; + + pci_read_config_word(pdev, SMBBANFORCE, &amd756_ioport); + amd756_ioport &= 0xfffc; + } else { /* amd */ + if (PCI_FUNC(pdev->devfn) != 3) + return -ENODEV; + + pci_read_config_byte(pdev, SMBGCFG, &temp); + if ((temp & 128) == 0) { + dev_err(&pdev->dev, + "Error: SMBus controller I/O not enabled!\n"); + return -ENODEV; + } + + /* Determine the address of the SMBus areas */ + /* Technically it is a dword but... */ + pci_read_config_word(pdev, SMBBA, &amd756_ioport); + amd756_ioport &= 0xff00; + amd756_ioport += SMB_ADDR_OFFSET; + } + + error = acpi_check_region(amd756_ioport, SMB_IOSIZE, + amd756_driver.name); + if (error) + return -ENODEV; + + if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) { + dev_err(&pdev->dev, "SMB region 0x%x already in use!\n", + amd756_ioport); + return -ENODEV; + } + + pci_read_config_byte(pdev, SMBREV, &temp); + dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); + dev_dbg(&pdev->dev, "AMD756_smba = 0x%X\n", amd756_ioport); + + /* set up the sysfs linkage to our parent device */ + amd756_smbus.dev.parent = &pdev->dev; + + snprintf(amd756_smbus.name, sizeof(amd756_smbus.name), + "SMBus %s adapter at %04x", chipname[id->driver_data], + amd756_ioport); + + error = i2c_add_adapter(&amd756_smbus); + if (error) { + dev_err(&pdev->dev, + "Adapter registration failed, module not inserted\n"); + goto out_err; + } + + return 0; + + out_err: + release_region(amd756_ioport, SMB_IOSIZE); + return error; +} + +static void amd756_remove(struct pci_dev *dev) +{ + i2c_del_adapter(&amd756_smbus); + release_region(amd756_ioport, SMB_IOSIZE); +} + +static struct pci_driver amd756_driver = { + .name = "amd756_smbus", + .id_table = amd756_ids, + .probe = amd756_probe, + .remove = amd756_remove, +}; + +module_pci_driver(amd756_driver); + +MODULE_AUTHOR("Merlin Hughes "); +MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(amd756_smbus);