X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fgpu%2Fdrm%2Fi915%2Fintel_psr.c;fp=kernel%2Fdrivers%2Fgpu%2Fdrm%2Fi915%2Fintel_psr.c;h=a8f9348259ae581f977ee1a244f1734947ef0be1;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/gpu/drm/i915/intel_psr.c b/kernel/drivers/gpu/drm/i915/intel_psr.c new file mode 100644 index 000000000..a8f934825 --- /dev/null +++ b/kernel/drivers/gpu/drm/i915/intel_psr.c @@ -0,0 +1,665 @@ +/* + * Copyright © 2014 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +/** + * DOC: Panel Self Refresh (PSR/SRD) + * + * Since Haswell Display controller supports Panel Self-Refresh on display + * panels witch have a remote frame buffer (RFB) implemented according to PSR + * spec in eDP1.3. PSR feature allows the display to go to lower standby states + * when system is idle but display is on as it eliminates display refresh + * request to DDR memory completely as long as the frame buffer for that + * display is unchanged. + * + * Panel Self Refresh must be supported by both Hardware (source) and + * Panel (sink). + * + * PSR saves power by caching the framebuffer in the panel RFB, which allows us + * to power down the link and memory controller. For DSI panels the same idea + * is called "manual mode". + * + * The implementation uses the hardware-based PSR support which automatically + * enters/exits self-refresh mode. The hardware takes care of sending the + * required DP aux message and could even retrain the link (that part isn't + * enabled yet though). The hardware also keeps track of any frontbuffer + * changes to know when to exit self-refresh mode again. Unfortunately that + * part doesn't work too well, hence why the i915 PSR support uses the + * software frontbuffer tracking to make sure it doesn't miss a screen + * update. For this integration intel_psr_invalidate() and intel_psr_flush() + * get called by the frontbuffer tracking code. Note that because of locking + * issues the self-refresh re-enable code is done from a work queue, which + * must be correctly synchronized/cancelled when shutting down the pipe." + */ + +#include + +#include "intel_drv.h" +#include "i915_drv.h" + +static bool is_edp_psr(struct intel_dp *intel_dp) +{ + return intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED; +} + +static bool vlv_is_psr_active_on_pipe(struct drm_device *dev, int pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t val; + + val = I915_READ(VLV_PSRSTAT(pipe)) & + VLV_EDP_PSR_CURR_STATE_MASK; + return (val == VLV_EDP_PSR_ACTIVE_NORFB_UP) || + (val == VLV_EDP_PSR_ACTIVE_SF_UPDATE); +} + +static void intel_psr_write_vsc(struct intel_dp *intel_dp, + struct edp_vsc_psr *vsc_psr) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); + u32 ctl_reg = HSW_TVIDEO_DIP_CTL(crtc->config->cpu_transcoder); + u32 data_reg = HSW_TVIDEO_DIP_VSC_DATA(crtc->config->cpu_transcoder); + uint32_t *data = (uint32_t *) vsc_psr; + unsigned int i; + + /* As per BSPec (Pipe Video Data Island Packet), we need to disable + the video DIP being updated before program video DIP data buffer + registers for DIP being updated. */ + I915_WRITE(ctl_reg, 0); + POSTING_READ(ctl_reg); + + for (i = 0; i < VIDEO_DIP_VSC_DATA_SIZE; i += 4) { + if (i < sizeof(struct edp_vsc_psr)) + I915_WRITE(data_reg + i, *data++); + else + I915_WRITE(data_reg + i, 0); + } + + I915_WRITE(ctl_reg, VIDEO_DIP_ENABLE_VSC_HSW); + POSTING_READ(ctl_reg); +} + +static void vlv_psr_setup_vsc(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = intel_dig_port->base.base.crtc; + enum pipe pipe = to_intel_crtc(crtc)->pipe; + uint32_t val; + + /* VLV auto-generate VSC package as per EDP 1.3 spec, Table 3.10 */ + val = I915_READ(VLV_VSCSDP(pipe)); + val &= ~VLV_EDP_PSR_SDP_FREQ_MASK; + val |= VLV_EDP_PSR_SDP_FREQ_EVFRAME; + I915_WRITE(VLV_VSCSDP(pipe), val); +} + +static void hsw_psr_setup_vsc(struct intel_dp *intel_dp) +{ + struct edp_vsc_psr psr_vsc; + + /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */ + memset(&psr_vsc, 0, sizeof(psr_vsc)); + psr_vsc.sdp_header.HB0 = 0; + psr_vsc.sdp_header.HB1 = 0x7; + psr_vsc.sdp_header.HB2 = 0x2; + psr_vsc.sdp_header.HB3 = 0x8; + intel_psr_write_vsc(intel_dp, &psr_vsc); +} + +static void vlv_psr_enable_sink(struct intel_dp *intel_dp) +{ + drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, + DP_PSR_ENABLE); +} + +static void hsw_psr_enable_sink(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t aux_clock_divider; + uint32_t aux_data_reg, aux_ctl_reg; + int precharge = 0x3; + static const uint8_t aux_msg[] = { + [0] = DP_AUX_NATIVE_WRITE << 4, + [1] = DP_SET_POWER >> 8, + [2] = DP_SET_POWER & 0xff, + [3] = 1 - 1, + [4] = DP_SET_POWER_D0, + }; + int i; + + BUILD_BUG_ON(sizeof(aux_msg) > 20); + + aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0); + + /* Enable PSR in sink */ + if (dev_priv->psr.link_standby) + drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, + DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE); + else + drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, + DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE); + + aux_data_reg = (INTEL_INFO(dev)->gen >= 9) ? + DPA_AUX_CH_DATA1 : EDP_PSR_AUX_DATA1(dev); + aux_ctl_reg = (INTEL_INFO(dev)->gen >= 9) ? + DPA_AUX_CH_CTL : EDP_PSR_AUX_CTL(dev); + + /* Setup AUX registers */ + for (i = 0; i < sizeof(aux_msg); i += 4) + I915_WRITE(aux_data_reg + i, + intel_dp_pack_aux(&aux_msg[i], sizeof(aux_msg) - i)); + + if (INTEL_INFO(dev)->gen >= 9) { + uint32_t val; + + val = I915_READ(aux_ctl_reg); + val &= ~DP_AUX_CH_CTL_TIME_OUT_MASK; + val |= DP_AUX_CH_CTL_TIME_OUT_1600us; + val &= ~DP_AUX_CH_CTL_MESSAGE_SIZE_MASK; + val |= (sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); + /* Use hardcoded data values for PSR */ + val &= ~DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL; + I915_WRITE(aux_ctl_reg, val); + } else { + I915_WRITE(aux_ctl_reg, + DP_AUX_CH_CTL_TIME_OUT_400us | + (sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT)); + } +} + +static void vlv_psr_enable_source(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = dig_port->base.base.crtc; + enum pipe pipe = to_intel_crtc(crtc)->pipe; + + /* Transition from PSR_state 0 to PSR_state 1, i.e. PSR Inactive */ + I915_WRITE(VLV_PSRCTL(pipe), + VLV_EDP_PSR_MODE_SW_TIMER | + VLV_EDP_PSR_SRC_TRANSMITTER_STATE | + VLV_EDP_PSR_ENABLE); +} + +static void vlv_psr_activate(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = dig_port->base.base.crtc; + enum pipe pipe = to_intel_crtc(crtc)->pipe; + + /* Let's do the transition from PSR_state 1 to PSR_state 2 + * that is PSR transition to active - static frame transmission. + * Then Hardware is responsible for the transition to PSR_state 3 + * that is PSR active - no Remote Frame Buffer (RFB) update. + */ + I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) | + VLV_EDP_PSR_ACTIVE_ENTRY); +} + +static void hsw_psr_enable_source(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t max_sleep_time = 0x1f; + /* Lately it was identified that depending on panel idle frame count + * calculated at HW can be off by 1. So let's use what came + * from VBT + 1 and at minimum 2 to be on the safe side. + */ + uint32_t idle_frames = dev_priv->vbt.psr.idle_frames ? + dev_priv->vbt.psr.idle_frames + 1 : 2; + uint32_t val = 0x0; + const uint32_t link_entry_time = EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES; + + if (dev_priv->psr.link_standby) { + val |= EDP_PSR_LINK_STANDBY; + val |= EDP_PSR_TP2_TP3_TIME_0us; + val |= EDP_PSR_TP1_TIME_0us; + val |= EDP_PSR_SKIP_AUX_EXIT; + } else + val |= EDP_PSR_LINK_DISABLE; + + I915_WRITE(EDP_PSR_CTL(dev), val | + (IS_BROADWELL(dev) ? 0 : link_entry_time) | + max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT | + idle_frames << EDP_PSR_IDLE_FRAME_SHIFT | + EDP_PSR_ENABLE); +} + +static bool intel_psr_match_conditions(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = dig_port->base.base.crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + lockdep_assert_held(&dev_priv->psr.lock); + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); + WARN_ON(!drm_modeset_is_locked(&crtc->mutex)); + + dev_priv->psr.source_ok = false; + + if (IS_HASWELL(dev) && dig_port->port != PORT_A) { + DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n"); + return false; + } + + if (!i915.enable_psr) { + DRM_DEBUG_KMS("PSR disable by flag\n"); + return false; + } + + if (IS_HASWELL(dev) && + I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config->cpu_transcoder)) & + S3D_ENABLE) { + DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n"); + return false; + } + + if (IS_HASWELL(dev) && + intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) { + DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n"); + return false; + } + + dev_priv->psr.source_ok = true; + return true; +} + +static void intel_psr_activate(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE); + WARN_ON(dev_priv->psr.active); + lockdep_assert_held(&dev_priv->psr.lock); + + /* Enable/Re-enable PSR on the host */ + if (HAS_DDI(dev)) + /* On HSW+ after we enable PSR on source it will activate it + * as soon as it match configure idle_frame count. So + * we just actually enable it here on activation time. + */ + hsw_psr_enable_source(intel_dp); + else + vlv_psr_activate(intel_dp); + + dev_priv->psr.active = true; +} + +/** + * intel_psr_enable - Enable PSR + * @intel_dp: Intel DP + * + * This function can only be called after the pipe is fully trained and enabled. + */ +void intel_psr_enable(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (!HAS_PSR(dev)) { + DRM_DEBUG_KMS("PSR not supported on this platform\n"); + return; + } + + if (!is_edp_psr(intel_dp)) { + DRM_DEBUG_KMS("PSR not supported by this panel\n"); + return; + } + + mutex_lock(&dev_priv->psr.lock); + if (dev_priv->psr.enabled) { + DRM_DEBUG_KMS("PSR already in use\n"); + goto unlock; + } + + if (!intel_psr_match_conditions(intel_dp)) + goto unlock; + + /* First we check VBT, but we must respect sink and source + * known restrictions */ + dev_priv->psr.link_standby = dev_priv->vbt.psr.full_link; + if ((intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT) || + (IS_BROADWELL(dev) && intel_dig_port->port != PORT_A)) + dev_priv->psr.link_standby = true; + + dev_priv->psr.busy_frontbuffer_bits = 0; + + if (HAS_DDI(dev)) { + hsw_psr_setup_vsc(intel_dp); + + /* Avoid continuous PSR exit by masking memup and hpd */ + I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP | + EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP); + + /* Enable PSR on the panel */ + hsw_psr_enable_sink(intel_dp); + + if (INTEL_INFO(dev)->gen >= 9) + intel_psr_activate(intel_dp); + } else { + vlv_psr_setup_vsc(intel_dp); + + /* Enable PSR on the panel */ + vlv_psr_enable_sink(intel_dp); + + /* On HSW+ enable_source also means go to PSR entry/active + * state as soon as idle_frame achieved and here would be + * to soon. However on VLV enable_source just enable PSR + * but let it on inactive state. So we might do this prior + * to active transition, i.e. here. + */ + vlv_psr_enable_source(intel_dp); + } + + dev_priv->psr.enabled = intel_dp; +unlock: + mutex_unlock(&dev_priv->psr.lock); +} + +static void vlv_psr_disable(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(intel_dig_port->base.base.crtc); + uint32_t val; + + if (dev_priv->psr.active) { + /* Put VLV PSR back to PSR_state 0 that is PSR Disabled. */ + if (wait_for((I915_READ(VLV_PSRSTAT(intel_crtc->pipe)) & + VLV_EDP_PSR_IN_TRANS) == 0, 1)) + WARN(1, "PSR transition took longer than expected\n"); + + val = I915_READ(VLV_PSRCTL(intel_crtc->pipe)); + val &= ~VLV_EDP_PSR_ACTIVE_ENTRY; + val &= ~VLV_EDP_PSR_ENABLE; + val &= ~VLV_EDP_PSR_MODE_MASK; + I915_WRITE(VLV_PSRCTL(intel_crtc->pipe), val); + + dev_priv->psr.active = false; + } else { + WARN_ON(vlv_is_psr_active_on_pipe(dev, intel_crtc->pipe)); + } +} + +static void hsw_psr_disable(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (dev_priv->psr.active) { + I915_WRITE(EDP_PSR_CTL(dev), + I915_READ(EDP_PSR_CTL(dev)) & ~EDP_PSR_ENABLE); + + /* Wait till PSR is idle */ + if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev)) & + EDP_PSR_STATUS_STATE_MASK) == 0, 2000, 10)) + DRM_ERROR("Timed out waiting for PSR Idle State\n"); + + dev_priv->psr.active = false; + } else { + WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE); + } +} + +/** + * intel_psr_disable - Disable PSR + * @intel_dp: Intel DP + * + * This function needs to be called before disabling pipe. + */ +void intel_psr_disable(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + mutex_lock(&dev_priv->psr.lock); + if (!dev_priv->psr.enabled) { + mutex_unlock(&dev_priv->psr.lock); + return; + } + + if (HAS_DDI(dev)) + hsw_psr_disable(intel_dp); + else + vlv_psr_disable(intel_dp); + + dev_priv->psr.enabled = NULL; + mutex_unlock(&dev_priv->psr.lock); + + cancel_delayed_work_sync(&dev_priv->psr.work); +} + +static void intel_psr_work(struct work_struct *work) +{ + struct drm_i915_private *dev_priv = + container_of(work, typeof(*dev_priv), psr.work.work); + struct intel_dp *intel_dp = dev_priv->psr.enabled; + struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc; + enum pipe pipe = to_intel_crtc(crtc)->pipe; + + /* We have to make sure PSR is ready for re-enable + * otherwise it keeps disabled until next full enable/disable cycle. + * PSR might take some time to get fully disabled + * and be ready for re-enable. + */ + if (HAS_DDI(dev_priv->dev)) { + if (wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev_priv->dev)) & + EDP_PSR_STATUS_STATE_MASK) == 0, 50)) { + DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n"); + return; + } + } else { + if (wait_for((I915_READ(VLV_PSRSTAT(pipe)) & + VLV_EDP_PSR_IN_TRANS) == 0, 1)) { + DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n"); + return; + } + } + mutex_lock(&dev_priv->psr.lock); + intel_dp = dev_priv->psr.enabled; + + if (!intel_dp) + goto unlock; + + /* + * The delayed work can race with an invalidate hence we need to + * recheck. Since psr_flush first clears this and then reschedules we + * won't ever miss a flush when bailing out here. + */ + if (dev_priv->psr.busy_frontbuffer_bits) + goto unlock; + + intel_psr_activate(intel_dp); +unlock: + mutex_unlock(&dev_priv->psr.lock); +} + +static void intel_psr_exit(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp *intel_dp = dev_priv->psr.enabled; + struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc; + enum pipe pipe = to_intel_crtc(crtc)->pipe; + u32 val; + + if (!dev_priv->psr.active) + return; + + if (HAS_DDI(dev)) { + val = I915_READ(EDP_PSR_CTL(dev)); + + WARN_ON(!(val & EDP_PSR_ENABLE)); + + I915_WRITE(EDP_PSR_CTL(dev), val & ~EDP_PSR_ENABLE); + } else { + val = I915_READ(VLV_PSRCTL(pipe)); + + /* Here we do the transition from PSR_state 3 to PSR_state 5 + * directly once PSR State 4 that is active with single frame + * update can be skipped. PSR_state 5 that is PSR exit then + * Hardware is responsible to transition back to PSR_state 1 + * that is PSR inactive. Same state after + * vlv_edp_psr_enable_source. + */ + val &= ~VLV_EDP_PSR_ACTIVE_ENTRY; + I915_WRITE(VLV_PSRCTL(pipe), val); + + /* Send AUX wake up - Spec says after transitioning to PSR + * active we have to send AUX wake up by writing 01h in DPCD + * 600h of sink device. + * XXX: This might slow down the transition, but without this + * HW doesn't complete the transition to PSR_state 1 and we + * never get the screen updated. + */ + drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, + DP_SET_POWER_D0); + } + + dev_priv->psr.active = false; +} + +/** + * intel_psr_invalidate - Invalidade PSR + * @dev: DRM device + * @frontbuffer_bits: frontbuffer plane tracking bits + * + * Since the hardware frontbuffer tracking has gaps we need to integrate + * with the software frontbuffer tracking. This function gets called every + * time frontbuffer rendering starts and a buffer gets dirtied. PSR must be + * disabled if the frontbuffer mask contains a buffer relevant to PSR. + * + * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits." + */ +void intel_psr_invalidate(struct drm_device *dev, + unsigned frontbuffer_bits) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc; + enum pipe pipe; + + mutex_lock(&dev_priv->psr.lock); + if (!dev_priv->psr.enabled) { + mutex_unlock(&dev_priv->psr.lock); + return; + } + + crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc; + pipe = to_intel_crtc(crtc)->pipe; + + intel_psr_exit(dev); + + frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe); + + dev_priv->psr.busy_frontbuffer_bits |= frontbuffer_bits; + mutex_unlock(&dev_priv->psr.lock); +} + +/** + * intel_psr_flush - Flush PSR + * @dev: DRM device + * @frontbuffer_bits: frontbuffer plane tracking bits + * + * Since the hardware frontbuffer tracking has gaps we need to integrate + * with the software frontbuffer tracking. This function gets called every + * time frontbuffer rendering has completed and flushed out to memory. PSR + * can be enabled again if no other frontbuffer relevant to PSR is dirty. + * + * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits. + */ +void intel_psr_flush(struct drm_device *dev, + unsigned frontbuffer_bits) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc; + enum pipe pipe; + + mutex_lock(&dev_priv->psr.lock); + if (!dev_priv->psr.enabled) { + mutex_unlock(&dev_priv->psr.lock); + return; + } + + crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc; + pipe = to_intel_crtc(crtc)->pipe; + dev_priv->psr.busy_frontbuffer_bits &= ~frontbuffer_bits; + + /* + * On Haswell sprite plane updates don't result in a psr invalidating + * signal in the hardware. Which means we need to manually fake this in + * software for all flushes, not just when we've seen a preceding + * invalidation through frontbuffer rendering. + */ + if (IS_HASWELL(dev) && + (frontbuffer_bits & INTEL_FRONTBUFFER_SPRITE(pipe))) + intel_psr_exit(dev); + + /* + * On Valleyview and Cherryview we don't use hardware tracking so + * any plane updates or cursor moves don't result in a PSR + * invalidating. Which means we need to manually fake this in + * software for all flushes, not just when we've seen a preceding + * invalidation through frontbuffer rendering. */ + if (!HAS_DDI(dev)) + intel_psr_exit(dev); + + if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits) + schedule_delayed_work(&dev_priv->psr.work, + msecs_to_jiffies(100)); + mutex_unlock(&dev_priv->psr.lock); +} + +/** + * intel_psr_init - Init basic PSR work and mutex. + * @dev: DRM device + * + * This function is called only once at driver load to initialize basic + * PSR stuff. + */ +void intel_psr_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work); + mutex_init(&dev_priv->psr.lock); +}