X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fgpu%2Fdrm%2Fi915%2Fintel_pm.c;fp=kernel%2Fdrivers%2Fgpu%2Fdrm%2Fi915%2Fintel_pm.c;h=3f802163f7d47b0c59d300c204b48d1aa6233e08;hb=52f993b8e89487ec9ee15a7fb4979e0f09a45b27;hp=f091ad12d694a43ebb0dce69b31089ffd4abe366;hpb=c189ccac5702322ed843fe17057035b7222a59b6;p=kvmfornfv.git

diff --git a/kernel/drivers/gpu/drm/i915/intel_pm.c b/kernel/drivers/gpu/drm/i915/intel_pm.c
index f091ad12d..3f802163f 100644
--- a/kernel/drivers/gpu/drm/i915/intel_pm.c
+++ b/kernel/drivers/gpu/drm/i915/intel_pm.c
@@ -1789,16 +1789,20 @@ static uint32_t ilk_compute_cur_wm(const struct intel_crtc_state *cstate,
 				   const struct intel_plane_state *pstate,
 				   uint32_t mem_value)
 {
-	int bpp = pstate->base.fb ? pstate->base.fb->bits_per_pixel / 8 : 0;
+	/*
+	 * We treat the cursor plane as always-on for the purposes of watermark
+	 * calculation.  Until we have two-stage watermark programming merged,
+	 * this is necessary to avoid flickering.
+	 */
+	int cpp = 4;
+	int width = pstate->visible ? pstate->base.crtc_w : 64;
 
-	if (!cstate->base.active || !pstate->visible)
+	if (!cstate->base.active)
 		return 0;
 
 	return ilk_wm_method2(ilk_pipe_pixel_rate(cstate),
 			      cstate->base.adjusted_mode.crtc_htotal,
-			      drm_rect_width(&pstate->dst),
-			      bpp,
-			      mem_value);
+			      width, cpp, mem_value);
 }
 
 /* Only for WM_LP. */
@@ -2092,33 +2096,35 @@ static void intel_read_wm_latency(struct drm_device *dev, uint16_t wm[8])
 		wm[7] = (val >> GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT) &
 				GEN9_MEM_LATENCY_LEVEL_MASK;
 
+		/*
+		 * If a level n (n > 1) has a 0us latency, all levels m (m >= n)
+		 * need to be disabled. We make sure to sanitize the values out
+		 * of the punit to satisfy this requirement.
+		 */
+		for (level = 1; level <= max_level; level++) {
+			if (wm[level] == 0) {
+				for (i = level + 1; i <= max_level; i++)
+					wm[i] = 0;
+				break;
+			}
+		}
+
 		/*
 		 * WaWmMemoryReadLatency:skl
 		 *
 		 * punit doesn't take into account the read latency so we need
-		 * to add 2us to the various latency levels we retrieve from
-		 * the punit.
-		 *   - W0 is a bit special in that it's the only level that
-		 *   can't be disabled if we want to have display working, so
-		 *   we always add 2us there.
-		 *   - For levels >=1, punit returns 0us latency when they are
-		 *   disabled, so we respect that and don't add 2us then
-		 *
-		 * Additionally, if a level n (n > 1) has a 0us latency, all
-		 * levels m (m >= n) need to be disabled. We make sure to
-		 * sanitize the values out of the punit to satisfy this
-		 * requirement.
+		 * to add 2us to the various latency levels we retrieve from the
+		 * punit when level 0 response data us 0us.
 		 */
-		wm[0] += 2;
-		for (level = 1; level <= max_level; level++)
-			if (wm[level] != 0)
+		if (wm[0] == 0) {
+			wm[0] += 2;
+			for (level = 1; level <= max_level; level++) {
+				if (wm[level] == 0)
+					break;
 				wm[level] += 2;
-			else {
-				for (i = level + 1; i <= max_level; i++)
-					wm[i] = 0;
-
-				break;
 			}
+		}
+
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		uint64_t sskpd = I915_READ64(MCH_SSKPD);
 
@@ -3880,6 +3886,8 @@ static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc)
 	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 		hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe));
 
+	memset(active, 0, sizeof(*active));
+
 	active->pipe_enabled = intel_crtc->active;
 
 	if (active->pipe_enabled) {
@@ -4520,7 +4528,8 @@ void gen6_rps_idle(struct drm_i915_private *dev_priv)
 		else
 			gen6_set_rps(dev_priv->dev, dev_priv->rps.idle_freq);
 		dev_priv->rps.last_adj = 0;
-		I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
+		I915_WRITE(GEN6_PMINTRMSK,
+			   gen6_sanitize_rps_pm_mask(dev_priv, ~0));
 	}
 	mutex_unlock(&dev_priv->rps.hw_lock);
 
@@ -6620,6 +6629,12 @@ static void broadwell_init_clock_gating(struct drm_device *dev)
 	misccpctl = I915_READ(GEN7_MISCCPCTL);
 	I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
 	I915_WRITE(GEN8_L3SQCREG1, BDW_WA_L3SQCREG1_DEFAULT);
+	/*
+	 * Wait at least 100 clocks before re-enabling clock gating. See
+	 * the definition of L3SQCREG1 in BSpec.
+	 */
+	POSTING_READ(GEN8_L3SQCREG1);
+	udelay(1);
 	I915_WRITE(GEN7_MISCCPCTL, misccpctl);
 
 	/*