X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fcrypto%2FKconfig;fp=kernel%2Fdrivers%2Fcrypto%2FKconfig;h=2569e043317e14c70eee11617622fe3dfe5a7846;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=033c0c86f6ec051af426b970825f84146223f840;hpb=f93b97fd65072de626c074dbe099a1fff05ce060;p=kvmfornfv.git diff --git a/kernel/drivers/crypto/Kconfig b/kernel/drivers/crypto/Kconfig index 033c0c86f..2569e0433 100644 --- a/kernel/drivers/crypto/Kconfig +++ b/kernel/drivers/crypto/Kconfig @@ -162,10 +162,10 @@ config CRYPTO_GHASH_S390 config CRYPTO_DEV_MV_CESA tristate "Marvell's Cryptographic Engine" depends on PLAT_ORION - select CRYPTO_ALGAPI select CRYPTO_AES - select CRYPTO_BLKCIPHER2 + select CRYPTO_BLKCIPHER select CRYPTO_HASH + select SRAM help This driver allows you to utilize the Cryptographic Engines and Security Accelerator (CESA) which can be found on the Marvell Orion @@ -173,10 +173,27 @@ config CRYPTO_DEV_MV_CESA Currently the driver supports AES in ECB and CBC mode without DMA. +config CRYPTO_DEV_MARVELL_CESA + tristate "New Marvell's Cryptographic Engine driver" + depends on PLAT_ORION || ARCH_MVEBU + select CRYPTO_AES + select CRYPTO_DES + select CRYPTO_BLKCIPHER + select CRYPTO_HASH + select SRAM + help + This driver allows you to utilize the Cryptographic Engines and + Security Accelerator (CESA) which can be found on the Armada 370. + This driver supports CPU offload through DMA transfers. + + This driver is aimed at replacing the mv_cesa driver. This will only + happen once it has received proper testing. + config CRYPTO_DEV_NIAGARA2 tristate "Niagara2 Stream Processing Unit driver" select CRYPTO_DES - select CRYPTO_ALGAPI + select CRYPTO_BLKCIPHER + select CRYPTO_HASH depends on SPARC64 help Each core of a Niagara2 processor contains a Stream @@ -189,7 +206,6 @@ config CRYPTO_DEV_NIAGARA2 config CRYPTO_DEV_HIFN_795X tristate "Driver HIFN 795x crypto accelerator chips" select CRYPTO_DES - select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER select HW_RANDOM if CRYPTO_DEV_HIFN_795X_RNG depends on PCI @@ -208,8 +224,10 @@ source drivers/crypto/caam/Kconfig config CRYPTO_DEV_TALITOS tristate "Talitos Freescale Security Engine (SEC)" - select CRYPTO_ALGAPI + select CRYPTO_AEAD select CRYPTO_AUTHENC + select CRYPTO_BLKCIPHER + select CRYPTO_HASH select HW_RANDOM depends on FSL_SOC help @@ -222,11 +240,29 @@ config CRYPTO_DEV_TALITOS To compile this driver as a module, choose M here: the module will be called talitos. +config CRYPTO_DEV_TALITOS1 + bool "SEC1 (SEC 1.0 and SEC Lite 1.2)" + depends on CRYPTO_DEV_TALITOS + depends on PPC_8xx || PPC_82xx + default y + help + Say 'Y' here to use the Freescale Security Engine (SEC) version 1.0 + found on MPC82xx or the Freescale Security Engine (SEC Lite) + version 1.2 found on MPC8xx + +config CRYPTO_DEV_TALITOS2 + bool "SEC2+ (SEC version 2.0 or upper)" + depends on CRYPTO_DEV_TALITOS + default y if !PPC_8xx + help + Say 'Y' here to use the Freescale Security Engine (SEC) + version 2 and following as found on MPC83xx, MPC85xx, etc ... + config CRYPTO_DEV_IXP4XX tristate "Driver for IXP4xx crypto hardware acceleration" depends on ARCH_IXP4XX && IXP4XX_QMGR && IXP4XX_NPE select CRYPTO_DES - select CRYPTO_ALGAPI + select CRYPTO_AEAD select CRYPTO_AUTHENC select CRYPTO_BLKCIPHER help @@ -236,7 +272,6 @@ config CRYPTO_DEV_PPC4XX tristate "Driver AMCC PPC4xx crypto accelerator" depends on PPC && 4xx select CRYPTO_HASH - select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help This option allows you to have support for AMCC crypto acceleration. @@ -257,7 +292,7 @@ config CRYPTO_DEV_OMAP_AES tristate "Support for OMAP AES hw engine" depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP2PLUS select CRYPTO_AES - select CRYPTO_BLKCIPHER2 + select CRYPTO_BLKCIPHER help OMAP processors have AES module accelerator. Select this if you want to use the OMAP module for AES algorithms. @@ -266,7 +301,7 @@ config CRYPTO_DEV_OMAP_DES tristate "Support for OMAP DES3DES hw engine" depends on ARCH_OMAP2PLUS select CRYPTO_DES - select CRYPTO_BLKCIPHER2 + select CRYPTO_BLKCIPHER help OMAP processors have DES/3DES module accelerator. Select this if you want to use the OMAP module for DES and 3DES algorithms. Currently @@ -276,9 +311,10 @@ config CRYPTO_DEV_OMAP_DES config CRYPTO_DEV_PICOXCELL tristate "Support for picoXcell IPSEC and Layer2 crypto engines" depends on ARCH_PICOXCELL && HAVE_CLK + select CRYPTO_AEAD select CRYPTO_AES select CRYPTO_AUTHENC - select CRYPTO_ALGAPI + select CRYPTO_BLKCIPHER select CRYPTO_DES select CRYPTO_CBC select CRYPTO_ECB @@ -304,7 +340,6 @@ config CRYPTO_DEV_S5P tristate "Support for Samsung S5PV210/Exynos crypto accelerator" depends on ARCH_S5PV210 || ARCH_EXYNOS select CRYPTO_AES - select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help This option allows you to have support for S5P crypto acceleration. @@ -312,11 +347,13 @@ config CRYPTO_DEV_S5P algorithms execution. config CRYPTO_DEV_NX - bool "Support for IBM Power7+ in-Nest cryptographic acceleration" - depends on PPC64 && IBMVIO && !CPU_LITTLE_ENDIAN - default n + bool "Support for IBM PowerPC Nest (NX) cryptographic acceleration" + depends on PPC64 help - Support for Power7+ in-Nest cryptographic acceleration. + This enables support for the NX hardware cryptographic accelerator + coprocessor that is in IBM PowerPC P7+ or later processors. This + does not actually enable any drivers, it only allows you to select + which acceleration type (encryption and/or compression) to enable. if CRYPTO_DEV_NX source "drivers/crypto/nx/Kconfig" @@ -325,7 +362,6 @@ endif config CRYPTO_DEV_UX500 tristate "Driver for ST-Ericsson UX500 crypto hardware acceleration" depends on ARCH_U8500 - select CRYPTO_ALGAPI help Driver for ST-Ericsson UX500 crypto engine. @@ -343,10 +379,7 @@ config CRYPTO_DEV_BFIN_CRC config CRYPTO_DEV_ATMEL_AES tristate "Support for Atmel AES hw accelerator" depends on ARCH_AT91 - select CRYPTO_CBC - select CRYPTO_ECB select CRYPTO_AES - select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER select AT_HDMAC help @@ -361,9 +394,6 @@ config CRYPTO_DEV_ATMEL_TDES tristate "Support for Atmel DES/TDES hw accelerator" depends on ARCH_AT91 select CRYPTO_DES - select CRYPTO_CBC - select CRYPTO_ECB - select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help Some Atmel processors have DES/TDES hw accelerator. @@ -376,10 +406,7 @@ config CRYPTO_DEV_ATMEL_TDES config CRYPTO_DEV_ATMEL_SHA tristate "Support for Atmel SHA hw accelerator" depends on ARCH_AT91 - select CRYPTO_SHA1 - select CRYPTO_SHA256 - select CRYPTO_SHA512 - select CRYPTO_ALGAPI + select CRYPTO_HASH help Some Atmel processors have SHA1/SHA224/SHA256/SHA384/SHA512 hw accelerator. @@ -392,9 +419,8 @@ config CRYPTO_DEV_ATMEL_SHA config CRYPTO_DEV_CCP bool "Support for AMD Cryptographic Coprocessor" depends on ((X86 && PCI) || (ARM64 && (OF_ADDRESS || ACPI))) && HAS_IOMEM - default n help - The AMD Cryptographic Coprocessor provides hardware support + The AMD Cryptographic Coprocessor provides hardware offload support for encryption, hashing and related operations. if CRYPTO_DEV_CCP @@ -403,14 +429,13 @@ endif config CRYPTO_DEV_MXS_DCP tristate "Support for Freescale MXS DCP" - depends on ARCH_MXS - select CRYPTO_SHA1 - select CRYPTO_SHA256 + depends on (ARCH_MXS || ARCH_MXC) + select STMP_DEVICE select CRYPTO_CBC select CRYPTO_ECB select CRYPTO_AES select CRYPTO_BLKCIPHER - select CRYPTO_ALGAPI + select CRYPTO_HASH help The Freescale i.MX23/i.MX28 has SHA1/SHA256 and AES128 CBC/ECB co-processor on the die. @@ -429,7 +454,6 @@ config CRYPTO_DEV_QCE select CRYPTO_CBC select CRYPTO_XTS select CRYPTO_CTR - select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help This driver supports Qualcomm crypto engine accelerator @@ -438,8 +462,7 @@ config CRYPTO_DEV_QCE config CRYPTO_DEV_VMX bool "Support for VMX cryptographic acceleration instructions" - depends on PPC64 - default n + depends on PPC64 && VSX help Support for VMX cryptographic acceleration instructions. @@ -449,7 +472,6 @@ config CRYPTO_DEV_IMGTEC_HASH tristate "Imagination Technologies hardware hash accelerator" depends on MIPS || COMPILE_TEST depends on HAS_DMA - select CRYPTO_ALGAPI select CRYPTO_MD5 select CRYPTO_SHA1 select CRYPTO_SHA256 @@ -459,4 +481,21 @@ config CRYPTO_DEV_IMGTEC_HASH hardware hash accelerator. Supporting MD5/SHA1/SHA224/SHA256 hashing algorithms. +config CRYPTO_DEV_SUN4I_SS + tristate "Support for Allwinner Security System cryptographic accelerator" + depends on ARCH_SUNXI + select CRYPTO_MD5 + select CRYPTO_SHA1 + select CRYPTO_AES + select CRYPTO_DES + select CRYPTO_BLKCIPHER + help + Some Allwinner SoC have a crypto accelerator named + Security System. Select this if you want to use it. + The Security System handle AES/DES/3DES ciphers in CBC mode + and SHA1 and MD5 hash algorithms. + + To compile this driver as a module, choose M here: the module + will be called sun4i-ss. + endif # CRYPTO_HW