X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fcpufreq%2Fblackfin-cpufreq.c;fp=kernel%2Fdrivers%2Fcpufreq%2Fblackfin-cpufreq.c;h=a9f8e5bd0716f508858627d33c381437153fc3a3;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/cpufreq/blackfin-cpufreq.c b/kernel/drivers/cpufreq/blackfin-cpufreq.c new file mode 100644 index 000000000..a9f8e5bd0 --- /dev/null +++ b/kernel/drivers/cpufreq/blackfin-cpufreq.c @@ -0,0 +1,217 @@ +/* + * Blackfin core clock scaling + * + * Copyright 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/* this is the table of CCLK frequencies, in Hz */ +/* .driver_data is the entry in the auxiliary dpm_state_table[] */ +static struct cpufreq_frequency_table bfin_freq_table[] = { + { + .frequency = CPUFREQ_TABLE_END, + .driver_data = 0, + }, + { + .frequency = CPUFREQ_TABLE_END, + .driver_data = 1, + }, + { + .frequency = CPUFREQ_TABLE_END, + .driver_data = 2, + }, + { + .frequency = CPUFREQ_TABLE_END, + .driver_data = 0, + }, +}; + +static struct bfin_dpm_state { + unsigned int csel; /* system clock divider */ + unsigned int tscale; /* change the divider on the core timer interrupt */ +} dpm_state_table[3]; + +#if defined(CONFIG_CYCLES_CLOCKSOURCE) +/* + * normalized to maximum frequency offset for CYCLES, + * used in time-ts cycles clock source, but could be used + * somewhere also. + */ +unsigned long long __bfin_cycles_off; +unsigned int __bfin_cycles_mod; +#endif + +/**************************************************************************/ +static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk) +{ + + unsigned long csel, min_cclk; + int index; + + /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */ +#if ANOMALY_05000273 || ANOMALY_05000274 || \ + (!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \ + && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) + min_cclk = sclk * 2; +#else + min_cclk = sclk; +#endif + +#ifndef CONFIG_BF60x + csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); +#else + csel = bfin_read32(CGU0_DIV) & 0x1F; +#endif + + for (index = 0; (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) { + bfin_freq_table[index].frequency = cclk >> index; +#ifndef CONFIG_BF60x + dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ +#else + dpm_state_table[index].csel = csel; +#endif + dpm_state_table[index].tscale = (TIME_SCALE >> index) - 1; + + pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", + bfin_freq_table[index].frequency, + dpm_state_table[index].csel, + dpm_state_table[index].tscale); + } + return; +} + +static void bfin_adjust_core_timer(void *info) +{ + unsigned int tscale; + unsigned int index = *(unsigned int *)info; + + /* we have to adjust the core timer, because it is using cclk */ + tscale = dpm_state_table[index].tscale; + bfin_write_TSCALE(tscale); + return; +} + +static unsigned int bfin_getfreq_khz(unsigned int cpu) +{ + /* Both CoreA/B have the same core clock */ + return get_cclk() / 1000; +} + +#ifdef CONFIG_BF60x +unsigned long cpu_set_cclk(int cpu, unsigned long new) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, "CCLK"); + if (IS_ERR(clk)) + return -ENODEV; + + ret = clk_set_rate(clk, new); + clk_put(clk); + return ret; +} +#endif + +static int bfin_target(struct cpufreq_policy *policy, unsigned int index) +{ +#ifndef CONFIG_BF60x + unsigned int plldiv; +#endif + static unsigned long lpj_ref; + static unsigned int lpj_ref_freq; + unsigned int old_freq, new_freq; + int ret = 0; + +#if defined(CONFIG_CYCLES_CLOCKSOURCE) + cycles_t cycles; +#endif + + old_freq = bfin_getfreq_khz(0); + new_freq = bfin_freq_table[index].frequency; + +#ifndef CONFIG_BF60x + plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel; + bfin_write_PLL_DIV(plldiv); +#else + ret = cpu_set_cclk(policy->cpu, new_freq * 1000); + if (ret != 0) { + WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret); + return ret; + } +#endif + on_each_cpu(bfin_adjust_core_timer, &index, 1); +#if defined(CONFIG_CYCLES_CLOCKSOURCE) + cycles = get_cycles(); + SSYNC(); + cycles += 10; /* ~10 cycles we lose after get_cycles() */ + __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index); + __bfin_cycles_mod = index; +#endif + if (!lpj_ref_freq) { + lpj_ref = loops_per_jiffy; + lpj_ref_freq = old_freq; + } + if (new_freq != old_freq) { + loops_per_jiffy = cpufreq_scale(lpj_ref, + lpj_ref_freq, new_freq); + } + + return ret; +} + +static int __bfin_cpu_init(struct cpufreq_policy *policy) +{ + + unsigned long cclk, sclk; + + cclk = get_cclk() / 1000; + sclk = get_sclk() / 1000; + + if (policy->cpu == CPUFREQ_CPU) + bfin_init_tables(cclk, sclk); + + policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ + + return cpufreq_table_validate_and_show(policy, bfin_freq_table); +} + +static struct cpufreq_driver bfin_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = bfin_target, + .get = bfin_getfreq_khz, + .init = __bfin_cpu_init, + .name = "bfin cpufreq", + .attr = cpufreq_generic_attr, +}; + +static int __init bfin_cpu_init(void) +{ + return cpufreq_register_driver(&bfin_driver); +} + +static void __exit bfin_cpu_exit(void) +{ + cpufreq_unregister_driver(&bfin_driver); +} + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("cpufreq driver for Blackfin"); +MODULE_LICENSE("GPL"); + +module_init(bfin_cpu_init); +module_exit(bfin_cpu_exit);