X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fbluetooth%2Fhci_ldisc.c;h=96bcec5598c221e4cec2841bbc4eb521d20778c1;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=5c9a73f026649c99a1b56d2f91d5981e29b905c9;hpb=f93b97fd65072de626c074dbe099a1fff05ce060;p=kvmfornfv.git diff --git a/kernel/drivers/bluetooth/hci_ldisc.c b/kernel/drivers/bluetooth/hci_ldisc.c index 5c9a73f02..96bcec559 100644 --- a/kernel/drivers/bluetooth/hci_ldisc.c +++ b/kernel/drivers/bluetooth/hci_ldisc.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -207,9 +208,6 @@ static int hci_uart_open(struct hci_dev *hdev) BT_DBG("%s %p", hdev->name, hdev); /* Nothing to do for UART driver */ - - set_bit(HCI_RUNNING, &hdev->flags); - return 0; } @@ -240,9 +238,6 @@ static int hci_uart_close(struct hci_dev *hdev) { BT_DBG("hdev %p", hdev); - if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) - return 0; - hci_uart_flush(hdev); hdev->flush = NULL; return 0; @@ -253,9 +248,6 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb) { struct hci_uart *hu = hci_get_drvdata(hdev); - if (!test_bit(HCI_RUNNING, &hdev->flags)) - return -EBUSY; - BT_DBG("%s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type, skb->len); hu->proto->enqueue(hu, skb); @@ -265,11 +257,133 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb) return 0; } +/* Flow control or un-flow control the device */ +void hci_uart_set_flow_control(struct hci_uart *hu, bool enable) +{ + struct tty_struct *tty = hu->tty; + struct ktermios ktermios; + int status; + unsigned int set = 0; + unsigned int clear = 0; + + if (enable) { + /* Disable hardware flow control */ + ktermios = tty->termios; + ktermios.c_cflag &= ~CRTSCTS; + status = tty_set_termios(tty, &ktermios); + BT_DBG("Disabling hardware flow control: %s", + status ? "failed" : "success"); + + /* Clear RTS to prevent the device from sending */ + /* Most UARTs need OUT2 to enable interrupts */ + status = tty->driver->ops->tiocmget(tty); + BT_DBG("Current tiocm 0x%x", status); + + set &= ~(TIOCM_OUT2 | TIOCM_RTS); + clear = ~set; + set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | + TIOCM_OUT2 | TIOCM_LOOP; + clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | + TIOCM_OUT2 | TIOCM_LOOP; + status = tty->driver->ops->tiocmset(tty, set, clear); + BT_DBG("Clearing RTS: %s", status ? "failed" : "success"); + } else { + /* Set RTS to allow the device to send again */ + status = tty->driver->ops->tiocmget(tty); + BT_DBG("Current tiocm 0x%x", status); + + set |= (TIOCM_OUT2 | TIOCM_RTS); + clear = ~set; + set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | + TIOCM_OUT2 | TIOCM_LOOP; + clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | + TIOCM_OUT2 | TIOCM_LOOP; + status = tty->driver->ops->tiocmset(tty, set, clear); + BT_DBG("Setting RTS: %s", status ? "failed" : "success"); + + /* Re-enable hardware flow control */ + ktermios = tty->termios; + ktermios.c_cflag |= CRTSCTS; + status = tty_set_termios(tty, &ktermios); + BT_DBG("Enabling hardware flow control: %s", + status ? "failed" : "success"); + } +} + +void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed, + unsigned int oper_speed) +{ + hu->init_speed = init_speed; + hu->oper_speed = oper_speed; +} + +void hci_uart_init_tty(struct hci_uart *hu) +{ + struct tty_struct *tty = hu->tty; + struct ktermios ktermios; + + /* Bring the UART into a known 8 bits no parity hw fc state */ + ktermios = tty->termios; + ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | + INLCR | IGNCR | ICRNL | IXON); + ktermios.c_oflag &= ~OPOST; + ktermios.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN); + ktermios.c_cflag &= ~(CSIZE | PARENB); + ktermios.c_cflag |= CS8; + ktermios.c_cflag |= CRTSCTS; + + /* tty_set_termios() return not checked as it is always 0 */ + tty_set_termios(tty, &ktermios); +} + +void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed) +{ + struct tty_struct *tty = hu->tty; + struct ktermios ktermios; + + ktermios = tty->termios; + ktermios.c_cflag &= ~CBAUD; + tty_termios_encode_baud_rate(&ktermios, speed, speed); + + /* tty_set_termios() return not checked as it is always 0 */ + tty_set_termios(tty, &ktermios); + + BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name, + tty->termios.c_ispeed, tty->termios.c_ospeed); +} + static int hci_uart_setup(struct hci_dev *hdev) { struct hci_uart *hu = hci_get_drvdata(hdev); struct hci_rp_read_local_version *ver; struct sk_buff *skb; + unsigned int speed; + int err; + + /* Init speed if any */ + if (hu->init_speed) + speed = hu->init_speed; + else if (hu->proto->init_speed) + speed = hu->proto->init_speed; + else + speed = 0; + + if (speed) + hci_uart_set_baudrate(hu, speed); + + /* Operational speed if any */ + if (hu->oper_speed) + speed = hu->oper_speed; + else if (hu->proto->oper_speed) + speed = hu->proto->oper_speed; + else + speed = 0; + + if (hu->proto->set_baudrate && speed) { + err = hu->proto->set_baudrate(hu, speed); + if (!err) + hci_uart_set_baudrate(hu, speed); + } if (hu->proto->setup) return hu->proto->setup(hu); @@ -347,8 +461,6 @@ static int hci_uart_tty_open(struct tty_struct *tty) INIT_WORK(&hu->init_ready, hci_uart_init_work); INIT_WORK(&hu->write_work, hci_uart_write_work); - spin_lock_init(&hu->rx_lock); - /* Flush any pending characters in the driver and line discipline. */ /* FIXME: why is this needed. Note don't use ldisc_ref here as the @@ -446,14 +558,14 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, if (!test_bit(HCI_UART_PROTO_SET, &hu->flags)) return; - spin_lock(&hu->rx_lock); + /* It does not need a lock here as it is already protected by a mutex in + * tty caller + */ hu->proto->recv(hu, data, count); if (hu->hdev) hu->hdev->stat.byte_rx += count; - spin_unlock(&hu->rx_lock); - tty_unthrottle(tty); } @@ -475,6 +587,13 @@ static int hci_uart_register_dev(struct hci_uart *hu) hdev->bus = HCI_UART; hci_set_drvdata(hdev, hu); + /* Only when vendor specific setup callback is provided, consider + * the manufacturer information valid. This avoids filling in the + * value for Ericsson when nothing is specified. + */ + if (hu->proto->setup) + hdev->manufacturer = hu->proto->manufacturer; + hdev->open = hci_uart_open; hdev->close = hci_uart_close; hdev->flush = hci_uart_flush; @@ -647,7 +766,7 @@ static int __init hci_uart_init(void) /* Register the tty discipline */ - memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc)); + memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc)); hci_uart_ldisc.magic = TTY_LDISC_MAGIC; hci_uart_ldisc.name = "n_hci"; hci_uart_ldisc.open = hci_uart_tty_open; @@ -681,9 +800,15 @@ static int __init hci_uart_init(void) #ifdef CONFIG_BT_HCIUART_3WIRE h5_init(); #endif +#ifdef CONFIG_BT_HCIUART_INTEL + intel_init(); +#endif #ifdef CONFIG_BT_HCIUART_BCM bcm_init(); #endif +#ifdef CONFIG_BT_HCIUART_QCA + qca_init(); +#endif return 0; } @@ -707,9 +832,15 @@ static void __exit hci_uart_exit(void) #ifdef CONFIG_BT_HCIUART_3WIRE h5_deinit(); #endif +#ifdef CONFIG_BT_HCIUART_INTEL + intel_deinit(); +#endif #ifdef CONFIG_BT_HCIUART_BCM bcm_deinit(); #endif +#ifdef CONFIG_BT_HCIUART_QCA + qca_deinit(); +#endif /* Release tty registration of line discipline */ err = tty_unregister_ldisc(N_HCI);