X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Facpi%2Facpica%2Fdsutils.c;fp=kernel%2Fdrivers%2Facpi%2Facpica%2Fdsutils.c;h=deeddd6d2f0523fbc5aff635acf63c3794a11b23;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/acpi/acpica/dsutils.c b/kernel/drivers/acpi/acpica/dsutils.c new file mode 100644 index 000000000..deeddd6d2 --- /dev/null +++ b/kernel/drivers/acpi/acpica/dsutils.c @@ -0,0 +1,879 @@ +/******************************************************************************* + * + * Module Name: dsutils - Dispatcher utilities + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "acparser.h" +#include "amlcode.h" +#include "acdispat.h" +#include "acinterp.h" +#include "acnamesp.h" +#include "acdebug.h" + +#define _COMPONENT ACPI_DISPATCHER +ACPI_MODULE_NAME("dsutils") + +/******************************************************************************* + * + * FUNCTION: acpi_ds_clear_implicit_return + * + * PARAMETERS: walk_state - Current State + * + * RETURN: None. + * + * DESCRIPTION: Clear and remove a reference on an implicit return value. Used + * to delete "stale" return values (if enabled, the return value + * from every operator is saved at least momentarily, in case the + * parent method exits.) + * + ******************************************************************************/ +void acpi_ds_clear_implicit_return(struct acpi_walk_state *walk_state) +{ + ACPI_FUNCTION_NAME(ds_clear_implicit_return); + + /* + * Slack must be enabled for this feature + */ + if (!acpi_gbl_enable_interpreter_slack) { + return; + } + + if (walk_state->implicit_return_obj) { + /* + * Delete any "stale" implicit return. However, in + * complex statements, the implicit return value can be + * bubbled up several levels. + */ + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "Removing reference on stale implicit return obj %p\n", + walk_state->implicit_return_obj)); + + acpi_ut_remove_reference(walk_state->implicit_return_obj); + walk_state->implicit_return_obj = NULL; + } +} + +#ifndef ACPI_NO_METHOD_EXECUTION +/******************************************************************************* + * + * FUNCTION: acpi_ds_do_implicit_return + * + * PARAMETERS: return_desc - The return value + * walk_state - Current State + * add_reference - True if a reference should be added to the + * return object + * + * RETURN: TRUE if implicit return enabled, FALSE otherwise + * + * DESCRIPTION: Implements the optional "implicit return". We save the result + * of every ASL operator and control method invocation in case the + * parent method exit. Before storing a new return value, we + * delete the previous return value. + * + ******************************************************************************/ + +u8 +acpi_ds_do_implicit_return(union acpi_operand_object *return_desc, + struct acpi_walk_state *walk_state, u8 add_reference) +{ + ACPI_FUNCTION_NAME(ds_do_implicit_return); + + /* + * Slack must be enabled for this feature, and we must + * have a valid return object + */ + if ((!acpi_gbl_enable_interpreter_slack) || (!return_desc)) { + return (FALSE); + } + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "Result %p will be implicitly returned; Prev=%p\n", + return_desc, walk_state->implicit_return_obj)); + + /* + * Delete any "stale" implicit return value first. However, in + * complex statements, the implicit return value can be + * bubbled up several levels, so we don't clear the value if it + * is the same as the return_desc. + */ + if (walk_state->implicit_return_obj) { + if (walk_state->implicit_return_obj == return_desc) { + return (TRUE); + } + acpi_ds_clear_implicit_return(walk_state); + } + + /* Save the implicit return value, add a reference if requested */ + + walk_state->implicit_return_obj = return_desc; + if (add_reference) { + acpi_ut_add_reference(return_desc); + } + + return (TRUE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_is_result_used + * + * PARAMETERS: op - Current Op + * walk_state - Current State + * + * RETURN: TRUE if result is used, FALSE otherwise + * + * DESCRIPTION: Check if a result object will be used by the parent + * + ******************************************************************************/ + +u8 +acpi_ds_is_result_used(union acpi_parse_object * op, + struct acpi_walk_state * walk_state) +{ + const struct acpi_opcode_info *parent_info; + + ACPI_FUNCTION_TRACE_PTR(ds_is_result_used, op); + + /* Must have both an Op and a Result Object */ + + if (!op) { + ACPI_ERROR((AE_INFO, "Null Op")); + return_UINT8(TRUE); + } + + /* + * We know that this operator is not a + * Return() operator (would not come here.) The following code is the + * optional support for a so-called "implicit return". Some AML code + * assumes that the last value of the method is "implicitly" returned + * to the caller. Just save the last result as the return value. + * NOTE: this is optional because the ASL language does not actually + * support this behavior. + */ + (void)acpi_ds_do_implicit_return(walk_state->result_obj, walk_state, + TRUE); + + /* + * Now determine if the parent will use the result + * + * If there is no parent, or the parent is a scope_op, we are executing + * at the method level. An executing method typically has no parent, + * since each method is parsed separately. A method invoked externally + * via execute_control_method has a scope_op as the parent. + */ + if ((!op->common.parent) || + (op->common.parent->common.aml_opcode == AML_SCOPE_OP)) { + + /* No parent, the return value cannot possibly be used */ + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "At Method level, result of [%s] not used\n", + acpi_ps_get_opcode_name(op->common. + aml_opcode))); + return_UINT8(FALSE); + } + + /* Get info on the parent. The root_op is AML_SCOPE */ + + parent_info = + acpi_ps_get_opcode_info(op->common.parent->common.aml_opcode); + if (parent_info->class == AML_CLASS_UNKNOWN) { + ACPI_ERROR((AE_INFO, "Unknown parent opcode Op=%p", op)); + return_UINT8(FALSE); + } + + /* + * Decide what to do with the result based on the parent. If + * the parent opcode will not use the result, delete the object. + * Otherwise leave it as is, it will be deleted when it is used + * as an operand later. + */ + switch (parent_info->class) { + case AML_CLASS_CONTROL: + + switch (op->common.parent->common.aml_opcode) { + case AML_RETURN_OP: + + /* Never delete the return value associated with a return opcode */ + + goto result_used; + + case AML_IF_OP: + case AML_WHILE_OP: + /* + * If we are executing the predicate AND this is the predicate op, + * we will use the return value + */ + if ((walk_state->control_state->common.state == + ACPI_CONTROL_PREDICATE_EXECUTING) + && (walk_state->control_state->control. + predicate_op == op)) { + goto result_used; + } + break; + + default: + + /* Ignore other control opcodes */ + + break; + } + + /* The general control opcode returns no result */ + + goto result_not_used; + + case AML_CLASS_CREATE: + /* + * These opcodes allow term_arg(s) as operands and therefore + * the operands can be method calls. The result is used. + */ + goto result_used; + + case AML_CLASS_NAMED_OBJECT: + + if ((op->common.parent->common.aml_opcode == AML_REGION_OP) || + (op->common.parent->common.aml_opcode == AML_DATA_REGION_OP) + || (op->common.parent->common.aml_opcode == AML_PACKAGE_OP) + || (op->common.parent->common.aml_opcode == + AML_VAR_PACKAGE_OP) + || (op->common.parent->common.aml_opcode == AML_BUFFER_OP) + || (op->common.parent->common.aml_opcode == + AML_INT_EVAL_SUBTREE_OP) + || (op->common.parent->common.aml_opcode == + AML_BANK_FIELD_OP)) { + /* + * These opcodes allow term_arg(s) as operands and therefore + * the operands can be method calls. The result is used. + */ + goto result_used; + } + + goto result_not_used; + + default: + /* + * In all other cases. the parent will actually use the return + * object, so keep it. + */ + goto result_used; + } + +result_used: + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "Result of [%s] used by Parent [%s] Op=%p\n", + acpi_ps_get_opcode_name(op->common.aml_opcode), + acpi_ps_get_opcode_name(op->common.parent->common. + aml_opcode), op)); + + return_UINT8(TRUE); + +result_not_used: + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "Result of [%s] not used by Parent [%s] Op=%p\n", + acpi_ps_get_opcode_name(op->common.aml_opcode), + acpi_ps_get_opcode_name(op->common.parent->common. + aml_opcode), op)); + + return_UINT8(FALSE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_delete_result_if_not_used + * + * PARAMETERS: op - Current parse Op + * result_obj - Result of the operation + * walk_state - Current state + * + * RETURN: Status + * + * DESCRIPTION: Used after interpretation of an opcode. If there is an internal + * result descriptor, check if the parent opcode will actually use + * this result. If not, delete the result now so that it will + * not become orphaned. + * + ******************************************************************************/ + +void +acpi_ds_delete_result_if_not_used(union acpi_parse_object *op, + union acpi_operand_object *result_obj, + struct acpi_walk_state *walk_state) +{ + union acpi_operand_object *obj_desc; + acpi_status status; + + ACPI_FUNCTION_TRACE_PTR(ds_delete_result_if_not_used, result_obj); + + if (!op) { + ACPI_ERROR((AE_INFO, "Null Op")); + return_VOID; + } + + if (!result_obj) { + return_VOID; + } + + if (!acpi_ds_is_result_used(op, walk_state)) { + + /* Must pop the result stack (obj_desc should be equal to result_obj) */ + + status = acpi_ds_result_pop(&obj_desc, walk_state); + if (ACPI_SUCCESS(status)) { + acpi_ut_remove_reference(result_obj); + } + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_resolve_operands + * + * PARAMETERS: walk_state - Current walk state with operands on stack + * + * RETURN: Status + * + * DESCRIPTION: Resolve all operands to their values. Used to prepare + * arguments to a control method invocation (a call from one + * method to another.) + * + ******************************************************************************/ + +acpi_status acpi_ds_resolve_operands(struct acpi_walk_state *walk_state) +{ + u32 i; + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE_PTR(ds_resolve_operands, walk_state); + + /* + * Attempt to resolve each of the valid operands + * Method arguments are passed by reference, not by value. This means + * that the actual objects are passed, not copies of the objects. + */ + for (i = 0; i < walk_state->num_operands; i++) { + status = + acpi_ex_resolve_to_value(&walk_state->operands[i], + walk_state); + if (ACPI_FAILURE(status)) { + break; + } + } + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_clear_operands + * + * PARAMETERS: walk_state - Current walk state with operands on stack + * + * RETURN: None + * + * DESCRIPTION: Clear all operands on the current walk state operand stack. + * + ******************************************************************************/ + +void acpi_ds_clear_operands(struct acpi_walk_state *walk_state) +{ + u32 i; + + ACPI_FUNCTION_TRACE_PTR(ds_clear_operands, walk_state); + + /* Remove a reference on each operand on the stack */ + + for (i = 0; i < walk_state->num_operands; i++) { + /* + * Remove a reference to all operands, including both + * "Arguments" and "Targets". + */ + acpi_ut_remove_reference(walk_state->operands[i]); + walk_state->operands[i] = NULL; + } + + walk_state->num_operands = 0; + return_VOID; +} +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_ds_create_operand + * + * PARAMETERS: walk_state - Current walk state + * arg - Parse object for the argument + * arg_index - Which argument (zero based) + * + * RETURN: Status + * + * DESCRIPTION: Translate a parse tree object that is an argument to an AML + * opcode to the equivalent interpreter object. This may include + * looking up a name or entering a new name into the internal + * namespace. + * + ******************************************************************************/ + +acpi_status +acpi_ds_create_operand(struct acpi_walk_state *walk_state, + union acpi_parse_object *arg, u32 arg_index) +{ + acpi_status status = AE_OK; + char *name_string; + u32 name_length; + union acpi_operand_object *obj_desc; + union acpi_parse_object *parent_op; + u16 opcode; + acpi_interpreter_mode interpreter_mode; + const struct acpi_opcode_info *op_info; + + ACPI_FUNCTION_TRACE_PTR(ds_create_operand, arg); + + /* A valid name must be looked up in the namespace */ + + if ((arg->common.aml_opcode == AML_INT_NAMEPATH_OP) && + (arg->common.value.string) && + !(arg->common.flags & ACPI_PARSEOP_IN_STACK)) { + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Getting a name: Arg=%p\n", + arg)); + + /* Get the entire name string from the AML stream */ + + status = + acpi_ex_get_name_string(ACPI_TYPE_ANY, + arg->common.value.buffer, + &name_string, &name_length); + + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* All prefixes have been handled, and the name is in name_string */ + + /* + * Special handling for buffer_field declarations. This is a deferred + * opcode that unfortunately defines the field name as the last + * parameter instead of the first. We get here when we are performing + * the deferred execution, so the actual name of the field is already + * in the namespace. We don't want to attempt to look it up again + * because we may be executing in a different scope than where the + * actual opcode exists. + */ + if ((walk_state->deferred_node) && + (walk_state->deferred_node->type == ACPI_TYPE_BUFFER_FIELD) + && (arg_index == + (u32) ((walk_state->opcode == + AML_CREATE_FIELD_OP) ? 3 : 2))) { + obj_desc = + ACPI_CAST_PTR(union acpi_operand_object, + walk_state->deferred_node); + status = AE_OK; + } else { /* All other opcodes */ + + /* + * Differentiate between a namespace "create" operation + * versus a "lookup" operation (IMODE_LOAD_PASS2 vs. + * IMODE_EXECUTE) in order to support the creation of + * namespace objects during the execution of control methods. + */ + parent_op = arg->common.parent; + op_info = + acpi_ps_get_opcode_info(parent_op->common. + aml_opcode); + if ((op_info->flags & AML_NSNODE) + && (parent_op->common.aml_opcode != + AML_INT_METHODCALL_OP) + && (parent_op->common.aml_opcode != AML_REGION_OP) + && (parent_op->common.aml_opcode != + AML_INT_NAMEPATH_OP)) { + + /* Enter name into namespace if not found */ + + interpreter_mode = ACPI_IMODE_LOAD_PASS2; + } else { + /* Return a failure if name not found */ + + interpreter_mode = ACPI_IMODE_EXECUTE; + } + + status = + acpi_ns_lookup(walk_state->scope_info, name_string, + ACPI_TYPE_ANY, interpreter_mode, + ACPI_NS_SEARCH_PARENT | + ACPI_NS_DONT_OPEN_SCOPE, walk_state, + ACPI_CAST_INDIRECT_PTR(struct + acpi_namespace_node, + &obj_desc)); + /* + * The only case where we pass through (ignore) a NOT_FOUND + * error is for the cond_ref_of opcode. + */ + if (status == AE_NOT_FOUND) { + if (parent_op->common.aml_opcode == + AML_COND_REF_OF_OP) { + /* + * For the Conditional Reference op, it's OK if + * the name is not found; We just need a way to + * indicate this to the interpreter, set the + * object to the root + */ + obj_desc = + ACPI_CAST_PTR(union + acpi_operand_object, + acpi_gbl_root_node); + status = AE_OK; + } else if (parent_op->common.aml_opcode == + AML_EXTERNAL_OP) { + + /* TBD: May only be temporary */ + + obj_desc = + acpi_ut_create_string_object((acpi_size) name_length); + + ACPI_STRNCPY(obj_desc->string.pointer, + name_string, name_length); + status = AE_OK; + } else { + /* + * We just plain didn't find it -- which is a + * very serious error at this point + */ + status = AE_AML_NAME_NOT_FOUND; + } + } + + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(name_string, status); + } + } + + /* Free the namestring created above */ + + ACPI_FREE(name_string); + + /* Check status from the lookup */ + + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Put the resulting object onto the current object stack */ + + status = acpi_ds_obj_stack_push(obj_desc, walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + ACPI_DEBUGGER_EXEC(acpi_db_display_argument_object + (obj_desc, walk_state)); + } else { + /* Check for null name case */ + + if ((arg->common.aml_opcode == AML_INT_NAMEPATH_OP) && + !(arg->common.flags & ACPI_PARSEOP_IN_STACK)) { + /* + * If the name is null, this means that this is an + * optional result parameter that was not specified + * in the original ASL. Create a Zero Constant for a + * placeholder. (Store to a constant is a Noop.) + */ + opcode = AML_ZERO_OP; /* Has no arguments! */ + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "Null namepath: Arg=%p\n", arg)); + } else { + opcode = arg->common.aml_opcode; + } + + /* Get the object type of the argument */ + + op_info = acpi_ps_get_opcode_info(opcode); + if (op_info->object_type == ACPI_TYPE_INVALID) { + return_ACPI_STATUS(AE_NOT_IMPLEMENTED); + } + + if ((op_info->flags & AML_HAS_RETVAL) + || (arg->common.flags & ACPI_PARSEOP_IN_STACK)) { + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "Argument previously created, already stacked\n")); + + ACPI_DEBUGGER_EXEC(acpi_db_display_argument_object + (walk_state-> + operands[walk_state->num_operands - + 1], walk_state)); + + /* + * Use value that was already previously returned + * by the evaluation of this argument + */ + status = acpi_ds_result_pop(&obj_desc, walk_state); + if (ACPI_FAILURE(status)) { + /* + * Only error is underflow, and this indicates + * a missing or null operand! + */ + ACPI_EXCEPTION((AE_INFO, status, + "Missing or null operand")); + return_ACPI_STATUS(status); + } + } else { + /* Create an ACPI_INTERNAL_OBJECT for the argument */ + + obj_desc = + acpi_ut_create_internal_object(op_info-> + object_type); + if (!obj_desc) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + /* Initialize the new object */ + + status = + acpi_ds_init_object_from_op(walk_state, arg, opcode, + &obj_desc); + if (ACPI_FAILURE(status)) { + acpi_ut_delete_object_desc(obj_desc); + return_ACPI_STATUS(status); + } + } + + /* Put the operand object on the object stack */ + + status = acpi_ds_obj_stack_push(obj_desc, walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + ACPI_DEBUGGER_EXEC(acpi_db_display_argument_object + (obj_desc, walk_state)); + } + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_create_operands + * + * PARAMETERS: walk_state - Current state + * first_arg - First argument of a parser argument tree + * + * RETURN: Status + * + * DESCRIPTION: Convert an operator's arguments from a parse tree format to + * namespace objects and place those argument object on the object + * stack in preparation for evaluation by the interpreter. + * + ******************************************************************************/ + +acpi_status +acpi_ds_create_operands(struct acpi_walk_state *walk_state, + union acpi_parse_object *first_arg) +{ + acpi_status status = AE_OK; + union acpi_parse_object *arg; + union acpi_parse_object *arguments[ACPI_OBJ_NUM_OPERANDS]; + u32 arg_count = 0; + u32 index = walk_state->num_operands; + u32 i; + + ACPI_FUNCTION_TRACE_PTR(ds_create_operands, first_arg); + + /* Get all arguments in the list */ + + arg = first_arg; + while (arg) { + if (index >= ACPI_OBJ_NUM_OPERANDS) { + return_ACPI_STATUS(AE_BAD_DATA); + } + + arguments[index] = arg; + walk_state->operands[index] = NULL; + + /* Move on to next argument, if any */ + + arg = arg->common.next; + arg_count++; + index++; + } + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "NumOperands %d, ArgCount %d, Index %d\n", + walk_state->num_operands, arg_count, index)); + + /* Create the interpreter arguments, in reverse order */ + + index--; + for (i = 0; i < arg_count; i++) { + arg = arguments[index]; + walk_state->operand_index = (u8)index; + + status = acpi_ds_create_operand(walk_state, arg, index); + if (ACPI_FAILURE(status)) { + goto cleanup; + } + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "Created Arg #%u (%p) %u args total\n", + index, arg, arg_count)); + index--; + } + + return_ACPI_STATUS(status); + +cleanup: + /* + * We must undo everything done above; meaning that we must + * pop everything off of the operand stack and delete those + * objects + */ + acpi_ds_obj_stack_pop_and_delete(arg_count, walk_state); + + ACPI_EXCEPTION((AE_INFO, status, "While creating Arg %u", index)); + return_ACPI_STATUS(status); +} + +/***************************************************************************** + * + * FUNCTION: acpi_ds_evaluate_name_path + * + * PARAMETERS: walk_state - Current state of the parse tree walk, + * the opcode of current operation should be + * AML_INT_NAMEPATH_OP + * + * RETURN: Status + * + * DESCRIPTION: Translate the -name_path- parse tree object to the equivalent + * interpreter object, convert it to value, if needed, duplicate + * it, if needed, and push it onto the current result stack. + * + ****************************************************************************/ + +acpi_status acpi_ds_evaluate_name_path(struct acpi_walk_state *walk_state) +{ + acpi_status status = AE_OK; + union acpi_parse_object *op = walk_state->op; + union acpi_operand_object **operand = &walk_state->operands[0]; + union acpi_operand_object *new_obj_desc; + u8 type; + + ACPI_FUNCTION_TRACE_PTR(ds_evaluate_name_path, walk_state); + + if (!op->common.parent) { + + /* This happens after certain exception processing */ + + goto exit; + } + + if ((op->common.parent->common.aml_opcode == AML_PACKAGE_OP) || + (op->common.parent->common.aml_opcode == AML_VAR_PACKAGE_OP) || + (op->common.parent->common.aml_opcode == AML_REF_OF_OP)) { + + /* TBD: Should we specify this feature as a bit of op_info->Flags of these opcodes? */ + + goto exit; + } + + status = acpi_ds_create_operand(walk_state, op, 0); + if (ACPI_FAILURE(status)) { + goto exit; + } + + if (op->common.flags & ACPI_PARSEOP_TARGET) { + new_obj_desc = *operand; + goto push_result; + } + + type = (*operand)->common.type; + + status = acpi_ex_resolve_to_value(operand, walk_state); + if (ACPI_FAILURE(status)) { + goto exit; + } + + if (type == ACPI_TYPE_INTEGER) { + + /* It was incremented by acpi_ex_resolve_to_value */ + + acpi_ut_remove_reference(*operand); + + status = + acpi_ut_copy_iobject_to_iobject(*operand, &new_obj_desc, + walk_state); + if (ACPI_FAILURE(status)) { + goto exit; + } + } else { + /* + * The object either was anew created or is + * a Namespace node - don't decrement it. + */ + new_obj_desc = *operand; + } + + /* Cleanup for name-path operand */ + + status = acpi_ds_obj_stack_pop(1, walk_state); + if (ACPI_FAILURE(status)) { + walk_state->result_obj = new_obj_desc; + goto exit; + } + +push_result: + + walk_state->result_obj = new_obj_desc; + + status = acpi_ds_result_push(walk_state->result_obj, walk_state); + if (ACPI_SUCCESS(status)) { + + /* Force to take it from stack */ + + op->common.flags |= ACPI_PARSEOP_IN_STACK; + } + +exit: + + return_ACPI_STATUS(status); +}