X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Farch%2Fsparc%2Fkernel%2Fspiterrs.S;fp=kernel%2Farch%2Fsparc%2Fkernel%2Fspiterrs.S;h=c357e40ffd01526ca38a824c12ac077cdba135c6;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/arch/sparc/kernel/spiterrs.S b/kernel/arch/sparc/kernel/spiterrs.S new file mode 100644 index 000000000..c357e40ff --- /dev/null +++ b/kernel/arch/sparc/kernel/spiterrs.S @@ -0,0 +1,245 @@ + /* We need to carefully read the error status, ACK the errors, + * prevent recursive traps, and pass the information on to C + * code for logging. + * + * We pass the AFAR in as-is, and we encode the status + * information as described in asm-sparc64/sfafsr.h + */ + .type __spitfire_access_error,#function +__spitfire_access_error: + /* Disable ESTATE error reporting so that we do not take + * recursive traps and RED state the processor. + */ + stxa %g0, [%g0] ASI_ESTATE_ERROR_EN + membar #Sync + + mov UDBE_UE, %g1 + ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR + + /* __spitfire_cee_trap branches here with AFSR in %g4 and + * UDBE_CE in %g1. It only clears ESTATE_ERR_CE in the ESTATE + * Error Enable register. + */ +__spitfire_cee_trap_continue: + ldxa [%g0] ASI_AFAR, %g5 ! Get AFAR + + rdpr %tt, %g3 + and %g3, 0x1ff, %g3 ! Paranoia + sllx %g3, SFSTAT_TRAP_TYPE_SHIFT, %g3 + or %g4, %g3, %g4 + rdpr %tl, %g3 + cmp %g3, 1 + mov 1, %g3 + bleu %xcc, 1f + sllx %g3, SFSTAT_TL_GT_ONE_SHIFT, %g3 + + or %g4, %g3, %g4 + + /* Read in the UDB error register state, clearing the sticky + * error bits as-needed. We only clear them if the UE bit is + * set. Likewise, __spitfire_cee_trap below will only do so + * if the CE bit is set. + * + * NOTE: UltraSparc-I/II have high and low UDB error + * registers, corresponding to the two UDB units + * present on those chips. UltraSparc-IIi only + * has a single UDB, called "SDB" in the manual. + * For IIi the upper UDB register always reads + * as zero so for our purposes things will just + * work with the checks below. + */ +1: ldxa [%g0] ASI_UDBH_ERROR_R, %g3 + and %g3, 0x3ff, %g7 ! Paranoia + sllx %g7, SFSTAT_UDBH_SHIFT, %g7 + or %g4, %g7, %g4 + andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE + be,pn %xcc, 1f + nop + stxa %g3, [%g0] ASI_UDB_ERROR_W + membar #Sync + +1: mov 0x18, %g3 + ldxa [%g3] ASI_UDBL_ERROR_R, %g3 + and %g3, 0x3ff, %g7 ! Paranoia + sllx %g7, SFSTAT_UDBL_SHIFT, %g7 + or %g4, %g7, %g4 + andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE + be,pn %xcc, 1f + nop + mov 0x18, %g7 + stxa %g3, [%g7] ASI_UDB_ERROR_W + membar #Sync + +1: /* Ok, now that we've latched the error state, clear the + * sticky bits in the AFSR. + */ + stxa %g4, [%g0] ASI_AFSR + membar #Sync + + rdpr %tl, %g2 + cmp %g2, 1 + rdpr %pil, %g2 + bleu,pt %xcc, 1f + wrpr %g0, PIL_NORMAL_MAX, %pil + + ba,pt %xcc, etraptl1 + rd %pc, %g7 + + ba,pt %xcc, 2f + nop + +1: ba,pt %xcc, etrap_irq + rd %pc, %g7 + +2: +#ifdef CONFIG_TRACE_IRQFLAGS + call trace_hardirqs_off + nop +#endif + mov %l4, %o1 + mov %l5, %o2 + call spitfire_access_error + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + nop + .size __spitfire_access_error,.-__spitfire_access_error + + /* This is the trap handler entry point for ECC correctable + * errors. They are corrected, but we listen for the trap so + * that the event can be logged. + * + * Disrupting errors are either: + * 1) single-bit ECC errors during UDB reads to system + * memory + * 2) data parity errors during write-back events + * + * As far as I can make out from the manual, the CEE trap is + * only for correctable errors during memory read accesses by + * the front-end of the processor. + * + * The code below is only for trap level 1 CEE events, as it + * is the only situation where we can safely record and log. + * For trap level >1 we just clear the CE bit in the AFSR and + * return. + * + * This is just like __spiftire_access_error above, but it + * specifically handles correctable errors. If an + * uncorrectable error is indicated in the AFSR we will branch + * directly above to __spitfire_access_error to handle it + * instead. Uncorrectable therefore takes priority over + * correctable, and the error logging C code will notice this + * case by inspecting the trap type. + */ + .type __spitfire_cee_trap,#function +__spitfire_cee_trap: + ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR + mov 1, %g3 + sllx %g3, SFAFSR_UE_SHIFT, %g3 + andcc %g4, %g3, %g0 ! Check for UE + bne,pn %xcc, __spitfire_access_error + nop + + /* Ok, in this case we only have a correctable error. + * Indicate we only wish to capture that state in register + * %g1, and we only disable CE error reporting unlike UE + * handling which disables all errors. + */ + ldxa [%g0] ASI_ESTATE_ERROR_EN, %g3 + andn %g3, ESTATE_ERR_CE, %g3 + stxa %g3, [%g0] ASI_ESTATE_ERROR_EN + membar #Sync + + /* Preserve AFSR in %g4, indicate UDB state to capture in %g1 */ + ba,pt %xcc, __spitfire_cee_trap_continue + mov UDBE_CE, %g1 + .size __spitfire_cee_trap,.-__spitfire_cee_trap + + .type __spitfire_data_access_exception_tl1,#function +__spitfire_data_access_exception_tl1: + rdpr %pstate, %g4 + wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate + mov TLB_SFSR, %g3 + mov DMMU_SFAR, %g5 + ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR + ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR + stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit + membar #Sync + rdpr %tt, %g3 + cmp %g3, 0x80 ! first win spill/fill trap + blu,pn %xcc, 1f + cmp %g3, 0xff ! last win spill/fill trap + bgu,pn %xcc, 1f + nop + ba,pt %xcc, winfix_dax + rdpr %tpc, %g3 +1: sethi %hi(109f), %g7 + ba,pt %xcc, etraptl1 +109: or %g7, %lo(109b), %g7 + mov %l4, %o1 + mov %l5, %o2 + call spitfire_data_access_exception_tl1 + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + nop + .size __spitfire_data_access_exception_tl1,.-__spitfire_data_access_exception_tl1 + + .type __spitfire_data_access_exception,#function +__spitfire_data_access_exception: + rdpr %pstate, %g4 + wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate + mov TLB_SFSR, %g3 + mov DMMU_SFAR, %g5 + ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR + ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR + stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit + membar #Sync + sethi %hi(109f), %g7 + ba,pt %xcc, etrap +109: or %g7, %lo(109b), %g7 + mov %l4, %o1 + mov %l5, %o2 + call spitfire_data_access_exception + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + nop + .size __spitfire_data_access_exception,.-__spitfire_data_access_exception + + .type __spitfire_insn_access_exception_tl1,#function +__spitfire_insn_access_exception_tl1: + rdpr %pstate, %g4 + wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate + mov TLB_SFSR, %g3 + ldxa [%g3] ASI_IMMU, %g4 ! Get SFSR + rdpr %tpc, %g5 ! IMMU has no SFAR, use TPC + stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit + membar #Sync + sethi %hi(109f), %g7 + ba,pt %xcc, etraptl1 +109: or %g7, %lo(109b), %g7 + mov %l4, %o1 + mov %l5, %o2 + call spitfire_insn_access_exception_tl1 + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + nop + .size __spitfire_insn_access_exception_tl1,.-__spitfire_insn_access_exception_tl1 + + .type __spitfire_insn_access_exception,#function +__spitfire_insn_access_exception: + rdpr %pstate, %g4 + wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate + mov TLB_SFSR, %g3 + ldxa [%g3] ASI_IMMU, %g4 ! Get SFSR + rdpr %tpc, %g5 ! IMMU has no SFAR, use TPC + stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit + membar #Sync + sethi %hi(109f), %g7 + ba,pt %xcc, etrap +109: or %g7, %lo(109b), %g7 + mov %l4, %o1 + mov %l5, %o2 + call spitfire_insn_access_exception + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + nop + .size __spitfire_insn_access_exception,.-__spitfire_insn_access_exception