X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Farch%2Fs390%2Fkernel%2Fhead.S;h=301ee9c70688b7ef35db09a62c9b8f3524ed5e68;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=59b7c6470567d6d611daa28e310f4c420ffdedaf;hpb=f93b97fd65072de626c074dbe099a1fff05ce060;p=kvmfornfv.git diff --git a/kernel/arch/s390/kernel/head.S b/kernel/arch/s390/kernel/head.S index 59b7c6470..301ee9c70 100644 --- a/kernel/arch/s390/kernel/head.S +++ b/kernel/arch/s390/kernel/head.S @@ -26,6 +26,7 @@ #include #include #include +#include #define ARCH_OFFSET 4 @@ -59,19 +60,6 @@ __HEAD .long 0x020006e0,0x20000050 .org 0x200 -# -# subroutine to set architecture mode -# -.Lsetmode: - mvi __LC_AR_MODE_ID,1 # set esame flag - slr %r0,%r0 # set cpuid to zero - lhi %r1,2 # mode 2 = esame (dump) - sigp %r1,%r0,0x12 # switch to esame mode - bras %r13,0f - .fill 16,4,0x0 -0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs - sam31 # switch to 31 bit addressing mode - br %r14 # # subroutine to wait for end I/O @@ -159,7 +147,14 @@ __HEAD .long 0x02200050,0x00000000 iplstart: - bas %r14,.Lsetmode # Immediately switch to 64 bit mode + mvi __LC_AR_MODE_ID,1 # set esame flag + slr %r0,%r0 # set cpuid to zero + lhi %r1,2 # mode 2 = esame (dump) + sigp %r1,%r0,0x12 # switch to esame mode + bras %r13,0f + .fill 16,4,0x0 +0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs + sam31 # switch to 31 bit addressing mode lh %r1,0xb8 # test if subchannel number bct %r1,.Lnoload # is valid l %r1,0xb8 # load ipl subchannel number @@ -268,71 +263,6 @@ iplstart: .align 8 .Lcpuid:.fill 8,1,0 -# -# SALIPL loader support. Based on a patch by Rob van der Heij. -# This entry point is called directly from the SALIPL loader and -# doesn't need a builtin ipl record. -# - .org 0x800 -ENTRY(start) - stm %r0,%r15,0x07b0 # store registers - bas %r14,.Lsetmode # Immediately switch to 64 bit mode - basr %r12,%r0 -.base: - l %r11,.parm - l %r8,.cmd # pointer to command buffer - - ltr %r9,%r9 # do we have SALIPL parameters? - bp .sk8x8 - - mvc 0(64,%r8),0x00b0 # copy saved registers - xc 64(240-64,%r8),0(%r8) # remainder of buffer - tr 0(64,%r8),.lowcase - b .gotr -.sk8x8: - mvc 0(240,%r8),0(%r9) # copy iplparms into buffer -.gotr: - slr %r0,%r0 - st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) - st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) - j startup # continue with startup -.cmd: .long COMMAND_LINE # address of command line buffer -.parm: .long PARMAREA -.lowcase: - .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 - .byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f - .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 - .byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f - .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 - .byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f - .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 - .byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f - .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 - .byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f - .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 - .byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f - .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 - .byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f - .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 - .byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f - - .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 - .byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f - .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 - .byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f - .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 - .byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf - .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 - .byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf - .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg - .byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi - .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop - .byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr - .byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx - .byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz - .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 - .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff - # # startup-code at 0x10000, running in absolute addressing mode # this is called either by the ipl loader or directly by PSW restart @@ -364,12 +294,13 @@ ENTRY(startup_kdump) bras %r13,0f .fill 16,4,0x0 0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs - sam31 # switch to 31 bit addressing mode + sam64 # switch to 64 bit addressing mode basr %r13,0 # get base .LPG0: xc 0x200(256),0x200 # partially clear lowcore xc 0x300(256),0x300 xc 0xe00(256),0xe00 + lctlg %c0,%c15,0x200(%r0) # initialize control registers stck __LC_LAST_UPDATE_CLOCK spt 6f-.LPG0(%r13) mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13) @@ -394,7 +325,7 @@ ENTRY(startup_kdump) jnz 1b j 4f 2: l %r15,.Lstack-.LPG0(%r13) - ahi %r15,-96 + ahi %r15,-STACK_FRAME_OVERHEAD la %r2,.Lals_string-.LPG0(%r13) l %r3,.Lsclp_print-.LPG0(%r13) basr %r14,%r3 @@ -413,9 +344,9 @@ ENTRY(startup_kdump) # followed by the facility words. #if defined(CONFIG_MARCH_Z13) - .long 3, 0xc100eff2, 0xf46ce800, 0x00400000 + .long 2, 0xc100eff2, 0xf46cc800 #elif defined(CONFIG_MARCH_ZEC12) - .long 3, 0xc100eff2, 0xf46ce800, 0x00400000 + .long 2, 0xc100eff2, 0xf46cc800 #elif defined(CONFIG_MARCH_Z196) .long 2, 0xc100eff2, 0xf46c0000 #elif defined(CONFIG_MARCH_Z10) @@ -428,8 +359,7 @@ ENTRY(startup_kdump) .long 1, 0xc0000000 #endif 4: - /* Continue with 64bit startup code in head64.S */ - sam64 # switch to 64 bit mode + /* Continue with startup code in head64.S */ jg startup_continue .align 8