X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Farch%2Farm64%2FKconfig;h=1baa6537cf3fbba616facd70fbc07de6ac12a9d7;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=09a41259b9840251233e536415cda9c413718382;hpb=ddbae00816a243e16209f291af562d9f1bb3d4c2;p=kvmfornfv.git diff --git a/kernel/arch/arm64/Kconfig b/kernel/arch/arm64/Kconfig index 09a41259b..1baa6537c 100644 --- a/kernel/arch/arm64/Kconfig +++ b/kernel/arch/arm64/Kconfig @@ -1,5 +1,6 @@ config ARM64 def_bool y + select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE @@ -19,16 +20,20 @@ config ARM64 select ARM_GIC_V2M if PCI_MSI select ARM_GIC_V3 select ARM_GIC_V3_ITS if PCI_MSI + select ARM_PSCI_FW select BUILDTIME_EXTABLE_SORT select CLONE_BACKWARDS select COMMON_CLK select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS + select EDAC_SUPPORT + select FRAME_POINTER select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS - select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select GENERIC_CLOCKEVENTS_BROADCAST select GENERIC_CPU_AUTOPROBE select GENERIC_EARLY_IOREMAP + select GENERIC_IDLE_POLL_SETUP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL @@ -44,6 +49,7 @@ config ARM64 select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_BITREVERSE select HAVE_ARCH_JUMP_LABEL + select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48) select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP_FILTER select HAVE_ARCH_TRACEHOOK @@ -51,6 +57,7 @@ config ARM64 select HAVE_C_RECORDMCOUNT select HAVE_CC_STACKPROTECTOR select HAVE_CMPXCHG_DOUBLE + select HAVE_CMPXCHG_LOCAL select HAVE_DEBUG_BUGVERBOSE select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_API_DEBUG @@ -71,6 +78,7 @@ config ARM64 select HAVE_RCU_TABLE_FREE select HAVE_PREEMPT_LAZY select HAVE_SYSCALL_TRACEPOINTS + select IOMMU_DMA if IOMMU_SUPPORT select IRQ_DOMAIN select IRQ_FORCED_THREADING select MODULES_USE_ELF_RELA @@ -116,6 +124,14 @@ config TRACE_IRQFLAGS_SUPPORT config RWSEM_XCHGADD_ALGORITHM def_bool y +config GENERIC_BUG + def_bool y + depends on BUG + +config GENERIC_BUG_RELATIVE_POINTERS + def_bool y + depends on GENERIC_BUG + config GENERIC_HWEIGHT def_bool y @@ -140,6 +156,9 @@ config NEED_DMA_MAP_STATE config NEED_SG_DMA_LENGTH def_bool y +config SMP + def_bool y + config SWIOTLB def_bool y @@ -154,114 +173,18 @@ config FIX_EARLYCON_MEM config PGTABLE_LEVELS int + default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36 default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42 default 3 if ARM64_64K_PAGES && ARM64_VA_BITS_48 default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39 - default 4 if ARM64_4K_PAGES && ARM64_VA_BITS_48 + default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47 + default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48 source "init/Kconfig" source "kernel/Kconfig.freezer" -menu "Platform selection" - -config ARCH_EXYNOS - bool - help - This enables support for Samsung Exynos SoC family - -config ARCH_EXYNOS7 - bool "ARMv8 based Samsung Exynos7" - select ARCH_EXYNOS - select COMMON_CLK_SAMSUNG - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select PINCTRL - select PINCTRL_EXYNOS - - help - This enables support for Samsung Exynos7 SoC family - -config ARCH_FSL_LS2085A - bool "Freescale LS2085A SOC" - help - This enables support for Freescale LS2085A SOC. - -config ARCH_MEDIATEK - bool "Mediatek MT65xx & MT81xx ARMv8 SoC" - select ARM_GIC - select PINCTRL - help - Support for Mediatek MT65xx & MT81xx ARMv8 SoCs - -config ARCH_QCOM - bool "Qualcomm Platforms" - select PINCTRL - help - This enables support for the ARMv8 based Qualcomm chipsets. - -config ARCH_SEATTLE - bool "AMD Seattle SoC Family" - help - This enables support for AMD Seattle SOC Family - -config ARCH_TEGRA - bool "NVIDIA Tegra SoC Family" - select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_CLK - select PINCTRL - select RESET_CONTROLLER - help - This enables support for the NVIDIA Tegra SoC family. - -config ARCH_TEGRA_132_SOC - bool "NVIDIA Tegra132 SoC" - depends on ARCH_TEGRA - select PINCTRL_TEGRA124 - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY - help - Enable support for NVIDIA Tegra132 SoC, based on the Denver - ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC, - but contains an NVIDIA Denver CPU complex in place of - Tegra124's "4+1" Cortex-A15 CPU complex. - -config ARCH_SPRD - bool "Spreadtrum SoC platform" - help - Support for Spreadtrum ARM based SoCs - -config ARCH_THUNDER - bool "Cavium Inc. Thunder SoC Family" - help - This enables support for Cavium's Thunder Family of SoCs. - -config ARCH_VEXPRESS - bool "ARMv8 software model (Versatile Express)" - select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK_VERSATILE - select POWER_RESET_VEXPRESS - select VEXPRESS_CONFIG - help - This enables support for the ARMv8 software model (Versatile - Express). - -config ARCH_XGENE - bool "AppliedMicro X-Gene SOC Family" - help - This enables support for AppliedMicro X-Gene SOC Family - -config ARCH_ZYNQMP - bool "Xilinx ZynqMP Family" - help - This enables support for Xilinx ZynqMP Family - -endmenu +source "arch/arm64/Kconfig.platforms" menu "Bus support" @@ -394,6 +317,27 @@ config ARM64_ERRATUM_832075 If unsure, say Y. +config ARM64_ERRATUM_834220 + bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault" + depends on KVM + default y + help + This option adds an alternative code sequence to work around ARM + erratum 834220 on Cortex-A57 parts up to r1p2. + + Affected Cortex-A57 parts might report a Stage 2 translation + fault as the result of a Stage 1 fault for load crossing a + page boundary when there is a permission or device memory + alignment fault at Stage 1 and a translation fault at Stage 2. + + The workaround is to verify that the Stage 1 translation + doesn't generate a fault before handling the Stage 2 fault. + Please note that this does not necessarily enable the workaround, + as it depends on the alternative framework, which will only patch + the kernel if an affected CPU is detected. + + If unsure, say Y. + config ARM64_ERRATUM_845719 bool "Cortex-A53: 845719: a load might read incorrect data" depends on COMPAT @@ -431,6 +375,33 @@ config ARM64_ERRATUM_843419 If unsure, say Y. +config CAVIUM_ERRATUM_22375 + bool "Cavium erratum 22375, 24313" + default y + help + Enable workaround for erratum 22375, 24313. + + This implements two gicv3-its errata workarounds for ThunderX. Both + with small impact affecting only ITS table allocation. + + erratum 22375: only alloc 8MB table size + erratum 24313: ignore memory access type + + The fixes are in ITS initialization and basically ignore memory access + type and table size provided by the TYPER and BASER registers. + + If unsure, say Y. + +config CAVIUM_ERRATUM_23154 + bool "Cavium erratum 23154: Access to ICC_IAR1_EL1 is not sync'ed" + default y + help + The gicv3 of ThunderX requires a modified version for + reading the IAR status to ensure data synchronization + (access to icc_iar1_el1 is not sync'ed before and after). + + If unsure, say Y. + endmenu @@ -445,25 +416,37 @@ config ARM64_4K_PAGES help This feature enables 4KB pages support. +config ARM64_16K_PAGES + bool "16KB" + help + The system will use 16KB pages support. AArch32 emulation + requires applications compiled with 16K (or a multiple of 16K) + aligned segments. + config ARM64_64K_PAGES bool "64KB" help This feature enables 64KB pages support (4KB by default) allowing only two levels of page tables and faster TLB - look-up. AArch32 emulation is not available when this feature - is enabled. + look-up. AArch32 emulation requires applications compiled + with 64K aligned segments. endchoice choice prompt "Virtual address space size" default ARM64_VA_BITS_39 if ARM64_4K_PAGES + default ARM64_VA_BITS_47 if ARM64_16K_PAGES default ARM64_VA_BITS_42 if ARM64_64K_PAGES help Allows choosing one of multiple possible virtual address space sizes. The level of translation table is determined by a combination of page size and virtual address space size. +config ARM64_VA_BITS_36 + bool "36-bit" if EXPERT + depends on ARM64_16K_PAGES + config ARM64_VA_BITS_39 bool "39-bit" depends on ARM64_4K_PAGES @@ -472,6 +455,10 @@ config ARM64_VA_BITS_42 bool "42-bit" depends on ARM64_64K_PAGES +config ARM64_VA_BITS_47 + bool "47-bit" + depends on ARM64_16K_PAGES + config ARM64_VA_BITS_48 bool "48-bit" @@ -479,8 +466,10 @@ endchoice config ARM64_VA_BITS int + default 36 if ARM64_VA_BITS_36 default 39 if ARM64_VA_BITS_39 default 42 if ARM64_VA_BITS_42 + default 47 if ARM64_VA_BITS_47 default 48 if ARM64_VA_BITS_48 config CPU_BIG_ENDIAN @@ -488,22 +477,8 @@ config CPU_BIG_ENDIAN help Say Y if you plan on running a kernel in big-endian mode. -config SMP - bool "Symmetric Multi-Processing" - help - This enables support for systems with more than one CPU. If - you say N here, the kernel will run on single and - multiprocessor machines, but will use only one CPU of a - multiprocessor machine. If you say Y here, the kernel will run - on many, but not all, single processor machines. On a single - processor machine, the kernel will run faster if you say N - here. - - If you don't know what to do here, say N. - config SCHED_MC bool "Multi-core scheduler support" - depends on SMP help Multi-core scheduler support improves the CPU scheduler's decision making when dealing with multi-core CPU chips at a cost of slightly @@ -511,7 +486,6 @@ config SCHED_MC config SCHED_SMT bool "SMT scheduler support" - depends on SMP help Improves the CPU scheduler's decision making when dealing with MultiThreading at a cost of slightly increased overhead in some @@ -520,26 +494,18 @@ config SCHED_SMT config NR_CPUS int "Maximum number of CPUs (2-4096)" range 2 4096 - depends on SMP # These have to remain sorted largest to smallest default "64" config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" - depends on SMP + select GENERIC_IRQ_MIGRATION help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. source kernel/Kconfig.preempt - -config UP_LATE_INIT - def_bool y - depends on !SMP - -config HZ - int - default 100 +source kernel/Kconfig.hz config ARCH_HAS_HOLES_MEMORYMODEL def_bool y if SPARSEMEM @@ -558,12 +524,8 @@ config HAVE_ARCH_PFN_VALID def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM config HW_PERF_EVENTS - bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS - default y - help - Enable hardware performance counter support for perf events. If - disabled, perf events will use software events only. + def_bool y + depends on ARM_PMU config SYS_SUPPORTS_HUGETLBFS def_bool y @@ -572,7 +534,7 @@ config ARCH_WANT_GENERAL_HUGETLB def_bool y config ARCH_WANT_HUGE_PMD_SHARE - def_bool y if !ARM64_64K_PAGES + def_bool y if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36) config HAVE_ARCH_TRANSPARENT_HUGEPAGE def_bool y @@ -609,7 +571,25 @@ config XEN config FORCE_MAX_ZONEORDER int default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE) + default "12" if (ARM64_16K_PAGES && TRANSPARENT_HUGEPAGE) default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + + We make sure that we can allocate upto a HugePage size for each configuration. + Hence we have : + MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2 + + However for 4K, we choose a higher default value, 11 as opposed to 10, giving us + 4M allocations matching the default size used by generic code. menuconfig ARMV8_DEPRECATED bool "Emulate deprecated/obsolete ARMv8 instructions" @@ -678,6 +658,53 @@ config SETEND_EMULATION If unsure, say Y endif +menu "ARMv8.1 architectural features" + +config ARM64_HW_AFDBM + bool "Support for hardware updates of the Access and Dirty page flags" + default y + help + The ARMv8.1 architecture extensions introduce support for + hardware updates of the access and dirty information in page + table entries. When enabled in TCR_EL1 (HA and HD bits) on + capable processors, accesses to pages with PTE_AF cleared will + set this bit instead of raising an access flag fault. + Similarly, writes to read-only pages with the DBM bit set will + clear the read-only bit (AP[2]) instead of raising a + permission fault. + + Kernels built with this configuration option enabled continue + to work on pre-ARMv8.1 hardware and the performance impact is + minimal. If unsure, say Y. + +config ARM64_PAN + bool "Enable support for Privileged Access Never (PAN)" + default y + help + Privileged Access Never (PAN; part of the ARMv8.1 Extensions) + prevents the kernel or hypervisor from accessing user-space (EL0) + memory directly. + + Choosing this option will cause any unprotected (not using + copy_to_user et al) memory access to fail with a permission fault. + + The feature is detected at runtime, and will remain as a 'nop' + instruction if the cpu does not implement the feature. + +config ARM64_LSE_ATOMICS + bool "Atomic instructions" + help + As part of the Large System Extensions, ARMv8.1 introduces new + atomic instructions that are designed specifically to scale in + very large systems. + + Say Y here to make use of these instructions for the in-kernel + atomic routines. This incurs a small overhead on CPUs that do + not support these instructions and requires the kernel to be + built with binutils >= 2.25. + +endmenu + endmenu menu "Boot options" @@ -737,7 +764,7 @@ source "fs/Kconfig.binfmt" config COMPAT bool "Kernel support for 32-bit EL0" - depends on !ARM64_64K_PAGES || EXPERT + depends on ARM64_4K_PAGES || EXPERT select COMPAT_BINFMT_ELF select HAVE_UID16 select OLD_SIGSUSPEND3 @@ -748,9 +775,9 @@ config COMPAT the user helper functions, VFP support and the ptrace interface are handled appropriately by the kernel. - If you also enabled CONFIG_ARM64_64K_PAGES, please be aware that you - will only be able to execute AArch32 binaries that were compiled with - 64k aligned segments. + If you use a page size other than 4KB (i.e, 16KB or 64KB), please be aware + that you will only be able to execute AArch32 binaries that were compiled + with page size aligned segments. If you want to execute 32-bit userspace applications, say Y.