X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Farch%2Farm%2Fmach-bcm%2Fboard_bcm2835.c;h=0f7b9eac3d15d23dc7faa78699e119c7faad547c;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=70f2f3925f0e8e08487abb20b55ba580c4026c43;hpb=f93b97fd65072de626c074dbe099a1fff05ce060;p=kvmfornfv.git

diff --git a/kernel/arch/arm/mach-bcm/board_bcm2835.c b/kernel/arch/arm/mach-bcm/board_bcm2835.c
index 70f2f3925..0f7b9eac3 100644
--- a/kernel/arch/arm/mach-bcm/board_bcm2835.c
+++ b/kernel/arch/arm/mach-bcm/board_bcm2835.c
@@ -12,7 +12,6 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
@@ -22,97 +21,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#define PM_RSTC				0x1c
-#define PM_RSTS				0x20
-#define PM_WDOG				0x24
-
-#define PM_PASSWORD			0x5a000000
-#define PM_RSTC_WRCFG_MASK		0x00000030
-#define PM_RSTC_WRCFG_FULL_RESET	0x00000020
-#define PM_RSTS_HADWRH_SET		0x00000040
-
-#define BCM2835_PERIPH_PHYS	0x20000000
-#define BCM2835_PERIPH_VIRT	0xf0000000
-#define BCM2835_PERIPH_SIZE	SZ_16M
-
-static void __iomem *wdt_regs;
-
-/*
- * The machine restart method can be called from an atomic context so we won't
- * be able to ioremap the regs then.
- */
-static void bcm2835_setup_restart(void)
-{
-	struct device_node *np = of_find_compatible_node(NULL, NULL,
-						"brcm,bcm2835-pm-wdt");
-	if (WARN(!np, "unable to setup watchdog restart"))
-		return;
-
-	wdt_regs = of_iomap(np, 0);
-	WARN(!wdt_regs, "failed to remap watchdog regs");
-}
-
-static void bcm2835_restart(enum reboot_mode mode, const char *cmd)
-{
-	u32 val;
-
-	if (!wdt_regs)
-		return;
-
-	/* use a timeout of 10 ticks (~150us) */
-	writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG);
-	val = readl_relaxed(wdt_regs + PM_RSTC);
-	val &= ~PM_RSTC_WRCFG_MASK;
-	val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
-	writel_relaxed(val, wdt_regs + PM_RSTC);
-
-	/* No sleeping, possibly atomic. */
-	mdelay(1);
-}
-
-/*
- * We can't really power off, but if we do the normal reset scheme, and
- * indicate to bootcode.bin not to reboot, then most of the chip will be
- * powered off.
- */
-static void bcm2835_power_off(void)
-{
-	u32 val;
-
-	/*
-	 * We set the watchdog hard reset bit here to distinguish this reset
-	 * from the normal (full) reset. bootcode.bin will not reboot after a
-	 * hard reset.
-	 */
-	val = readl_relaxed(wdt_regs + PM_RSTS);
-	val &= ~PM_RSTC_WRCFG_MASK;
-	val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
-	writel_relaxed(val, wdt_regs + PM_RSTS);
-
-	/* Continue with normal reset mechanism */
-	bcm2835_restart(REBOOT_HARD, "");
-}
-
-static struct map_desc io_map __initdata = {
-	.virtual = BCM2835_PERIPH_VIRT,
-	.pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
-	.length = BCM2835_PERIPH_SIZE,
-	.type = MT_DEVICE
-};
-
-static void __init bcm2835_map_io(void)
-{
-	iotable_init(&io_map, 1);
-}
-
 static void __init bcm2835_init(void)
 {
 	int ret;
 
-	bcm2835_setup_restart();
-	if (wdt_regs)
-		pm_power_off = bcm2835_power_off;
-
 	bcm2835_init_clocks();
 
 	ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
@@ -129,9 +41,6 @@ static const char * const bcm2835_compat[] = {
 };
 
 DT_MACHINE_START(BCM2835, "BCM2835")
-	.map_io = bcm2835_map_io,
-	.init_irq = irqchip_init,
 	.init_machine = bcm2835_init,
-	.restart = bcm2835_restart,
 	.dt_compat = bcm2835_compat
 MACHINE_END