X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Farch%2Farm%2Fkernel%2Fhead.S;h=04286fd9e09ce7a27259c4d375a05a965e3be0ea;hb=52f993b8e89487ec9ee15a7fb4979e0f09a45b27;hp=3637973a9708bc4f9e8f457b7c04307ca6e2212b;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/kernel/arch/arm/kernel/head.S b/kernel/arch/arm/kernel/head.S
index 3637973a9..04286fd9e 100644
--- a/kernel/arch/arm/kernel/head.S
+++ b/kernel/arch/arm/kernel/head.S
@@ -80,7 +80,7 @@
 ENTRY(stext)
  ARM_BE8(setend	be )			@ ensure we are in BE8 mode
 
- THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
+ THUMB(	badr	r9, 1f		)	@ Kernel is always entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
@@ -131,13 +131,30 @@ ENTRY(stext)
 	 * The following calls CPU specific code in a position independent
 	 * manner.  See arch/arm/mm/proc-*.S for details.  r10 = base of
 	 * xxx_proc_info structure selected by __lookup_processor_type
-	 * above.  On return, the CPU will be ready for the MMU to be
-	 * turned on, and r0 will hold the CPU control register value.
+	 * above.
+	 *
+	 * The processor init function will be called with:
+	 *  r1 - machine type
+	 *  r2 - boot data (atags/dt) pointer
+	 *  r4 - translation table base (low word)
+	 *  r5 - translation table base (high word, if LPAE)
+	 *  r8 - translation table base 1 (pfn if LPAE)
+	 *  r9 - cpuid
+	 *  r13 - virtual address for __enable_mmu -> __turn_mmu_on
+	 *
+	 * On return, the CPU will be ready for the MMU to be turned on,
+	 * r0 will hold the CPU control register value, r1, r2, r4, and
+	 * r9 will be preserved.  r5 will also be preserved if LPAE.
 	 */
 	ldr	r13, =__mmap_switched		@ address to jump to after
 						@ mmu has been enabled
-	adr	lr, BSYM(1f)			@ return (PIC) address
+	badr	lr, 1f				@ return (PIC) address
+#ifdef CONFIG_ARM_LPAE
+	mov	r5, #0				@ high TTBR0
+	mov	r8, r4, lsr #12			@ TTBR1 is swapper_pg_dir pfn
+#else
 	mov	r8, r4				@ set TTBR1 to swapper_pg_dir
+#endif
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10
 	ret	r12
@@ -158,7 +175,7 @@ ENDPROC(stext)
  *
  * Returns:
  *  r0, r3, r5-r7 corrupted
- *  r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
+ *  r4 = physical page table address
  */
 __create_page_tables:
 	pgtbl	r4, r8				@ page table address
@@ -333,7 +350,6 @@ __create_page_tables:
 #endif
 #ifdef CONFIG_ARM_LPAE
 	sub	r4, r4, #0x1000		@ point to the PGD table
-	mov	r4, r4, lsr #ARCH_PGD_SHIFT
 #endif
 	ret	lr
 ENDPROC(__create_page_tables)
@@ -346,9 +362,9 @@ __turn_mmu_on_loc:
 
 #if defined(CONFIG_SMP)
 	.text
-ENTRY(secondary_startup_arm)
 	.arm
- THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is entered in ARM.
+ENTRY(secondary_startup_arm)
+ THUMB(	badr	r9, 1f		)	@ Kernel is entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
@@ -381,10 +397,13 @@ ENTRY(secondary_startup)
 	adr	r4, __secondary_data
 	ldmia	r4, {r5, r7, r12}		@ address to jump to after
 	sub	lr, r4, r5			@ mmu has been enabled
-	ldr	r4, [r7, lr]			@ get secondary_data.pgdir
-	add	r7, r7, #4
-	ldr	r8, [r7, lr]			@ get secondary_data.swapper_pg_dir
-	adr	lr, BSYM(__enable_mmu)		@ return address
+	add	r3, r7, lr
+	ldrd	r4, [r3, #0]			@ get secondary_data.pgdir
+ARM_BE8(eor	r4, r4, r5)			@ Swap r5 and r4 in BE:
+ARM_BE8(eor	r5, r4, r5)			@ it can be done in 3 steps
+ARM_BE8(eor	r4, r4, r5)			@ without using a temp reg.
+	ldr	r8, [r3, #8]			@ get secondary_data.swapper_pg_dir
+	badr	lr, __enable_mmu		@ return address
 	mov	r13, r12			@ __secondary_switched address
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10			@ initialise processor
@@ -397,7 +416,7 @@ ENDPROC(secondary_startup_arm)
 	 * r6  = &secondary_data
 	 */
 ENTRY(__secondary_switched)
-	ldr	sp, [r7, #4]			@ get secondary_data.stack
+	ldr	sp, [r7, #12]			@ get secondary_data.stack
 	mov	fp, #0
 	b	secondary_start_kernel
 ENDPROC(__secondary_switched)
@@ -416,12 +435,14 @@ __secondary_data:
 /*
  * Setup common bits before finally enabling the MMU.  Essentially
  * this is just loading the page table pointer and domain access
- * registers.
+ * registers.  All these registers need to be preserved by the
+ * processor setup function (or set in the case of r0)
  *
  *  r0  = cp#15 control register
  *  r1  = machine ID
  *  r2  = atags or dtb pointer
- *  r4  = page table (see ARCH_PGD_SHIFT in asm/memory.h)
+ *  r4  = TTBR pointer (low word)
+ *  r5  = TTBR pointer (high word if LPAE)
  *  r9  = processor ID
  *  r13 = *virtual* address to jump to upon completion
  */
@@ -440,11 +461,10 @@ __enable_mmu:
 #ifdef CONFIG_CPU_ICACHE_DISABLE
 	bic	r0, r0, #CR_I
 #endif
-#ifndef CONFIG_ARM_LPAE
-	mov	r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
+#ifdef CONFIG_ARM_LPAE
+	mcrr	p15, 0, r4, r5, c2		@ load TTBR0
+#else
+	mov	r5, #DACR_INIT
 	mcr	p15, 0, r5, c3, c0, 0		@ load domain access register
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
 #endif