X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2FDocumentation%2Fdevicetree%2Fbindings%2Fvideo%2Fbacklight%2Fpwm-backlight.txt;fp=kernel%2FDocumentation%2Fdevicetree%2Fbindings%2Fvideo%2Fbacklight%2Fpwm-backlight.txt;h=0000000000000000000000000000000000000000;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=764db86d441ad131aceca0e15146d5c914d97919;hpb=f93b97fd65072de626c074dbe099a1fff05ce060;p=kvmfornfv.git

diff --git a/kernel/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/kernel/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
deleted file mode 100644
index 764db86d4..000000000
--- a/kernel/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-pwm-backlight bindings
-
-Required properties:
-  - compatible: "pwm-backlight"
-  - pwms: OF device-tree PWM specification (see PWM binding[0])
-  - brightness-levels: Array of distinct brightness levels. Typically these
-      are in the range from 0 to 255, but any range starting at 0 will do.
-      The actual brightness level (PWM duty cycle) will be interpolated
-      from these values. 0 means a 0% duty cycle (darkest/off), while the
-      last value in the array represents a 100% duty cycle (brightest).
-  - default-brightness-level: the default brightness level (index into the
-      array defined by the "brightness-levels" property)
-  - power-supply: regulator for supply voltage
-
-Optional properties:
-  - pwm-names: a list of names for the PWM devices specified in the
-               "pwms" property (see PWM binding[0])
-  - enable-gpios: contains a single GPIO specifier for the GPIO which enables
-                  and disables the backlight (see GPIO binding[1])
-
-[0]: Documentation/devicetree/bindings/pwm/pwm.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-		power-supply = <&vdd_bl_reg>;
-		enable-gpios = <&gpio 58 0>;
-	};