X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=conf%2F03_traffic.conf;h=6cfbbf2313b9b4263641608284082119869e2678;hb=b1534957e463b5e34957a8d48ce5c6b0552ffbb4;hp=72324660bacd3a43f4a846a62f188084ef7d8ed9;hpb=4481df385ac03ece015ccb429201f96189dc5ae2;p=vswitchperf.git diff --git a/conf/03_traffic.conf b/conf/03_traffic.conf index 72324660..6cfbbf23 100644 --- a/conf/03_traffic.conf +++ b/conf/03_traffic.conf @@ -1,4 +1,4 @@ -# Copyright 2015 Intel Corporation. +# Copyright 2015-2017 Intel Corporation. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -39,7 +39,8 @@ LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log' # 'multistream' - Defines number of flows simulated by traffic generator. # Value 0 disables multistream feature # Data type: int -# Supported values: 0-65535 +# Supported values: 0-65536 for 'L4' stream type +# unlimited for 'L2' and 'L3' stream types # Default value: 0. # 'stream_type' - Stream type is an extension of the "multistream" feature. # If multistream is disabled, then stream type will be @@ -53,10 +54,11 @@ LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log' # of selected transport protocol # Default value: "L4". # 'pre_installed_flows' -# - Pre-installed flows is an extension of the multistream" -# feature. If multistream is disabled, then pre-installed -# flows will be ignored. It defines if stream specific flows -# will be inserted into OVS or not. +# - Pre-installed flows is an extension of the "multistream" +# feature. If enabled, it will implicitly insert a flow +# for each stream. If multistream is disabled, then +# pre-installed flows will be ignored. +# Note: It is supported only for p2p deployment scenario. # Data type: str # Supported values: # "Yes" - flows will be inserted into OVS @@ -69,6 +71,18 @@ LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log' # "IP" - flow is defined by ingress ports # and src and dst IP addresses # Default value: "port" +# 'flow_control' - Controls flow control support by traffic generator. +# Supported values: +# False - flow control is disabled +# True - flow control is enabled +# Default value: False +# Note: Currently it is supported by IxNet only +# 'learning_frames' - Controls learning frames support by traffic generator. +# Supported values: +# False - learning freames are disabled +# True - learning freames are enabled +# Default value: True +# Note: Currently it is supported by IxNet only # 'l2' - A dictionary with l2 network layer details. Supported # values are: # 'srcmac' - Specifies source MAC address filled by traffic generator. @@ -86,6 +100,10 @@ LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log' # Default value: 64 # 'l3' - A dictionary with l3 network layer details. Supported # values are: +# 'enabled' - Specifies if l3 layer should be enabled or disabled. +# Data type: bool +# Default value: True +# NOTE: Supported only by IxNet trafficgen class # 'srcip' - Specifies source MAC address filled by traffic generator. # NOTE: It can be modified by vsperf in some scenarios. # Data type: str @@ -101,6 +119,10 @@ LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log' # Default value: "udp". # 'l4' - A dictionary with l4 network layer details. Supported # values are: +# 'enabled' - Specifies if l4 layer should be enabled or disabled. +# Data type: bool +# Default value: True +# NOTE: Supported only by IxNet trafficgen class # 'srcport' - Specifies source port of selected transport protocol. # NOTE: It can be modified by vsperf in some scenarios. # Data type: int @@ -133,18 +155,21 @@ TRAFFIC = { 'stream_type' : 'L4', 'pre_installed_flows' : 'No', # used by vswitch implementation 'flow_type' : 'port', # used by vswitch implementation - + 'flow_control' : False, # supported only by IxNet + 'learning_frames' : True, # supported only by IxNet 'l2': { 'framesize': 64, 'srcmac': '00:00:00:00:00:00', 'dstmac': '00:00:00:00:00:00', }, 'l3': { + 'enabled': True, 'proto': 'udp', 'srcip': '1.1.1.1', 'dstip': '90.90.90.90', }, 'l4': { + 'enabled': True, 'srcport': 3000, 'dstport': 3001, }, @@ -166,6 +191,7 @@ TRAFFICGEN = 'Dummy' #TRAFFICGEN = 'Ixia' #TRAFFICGEN = 'Xena' #TRAFFICGEN = 'Moongen' +#TRAFFICGEN = 'Trex' # List of packet sizes to send. # Expand like this: (64, 128, 256, 512, 1024) @@ -374,6 +400,19 @@ TRAFFICGEN_XENA_2544_TPUT_VALUE_RESOLUTION = '0.5' TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false' TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0' +# Xena RFC 2544 final verification options +TRAFFICGEN_XENA_RFC2544_VERIFY = False +TRAFFICGEN_XENA_RFC2544_VERIFY_DURATION = 120 # in seconds +# Number of verify attempts before giving up... +TRAFFICGEN_XENA_RFC2544_MAXIMUM_VERIFY_ATTEMPTS = 10 +# Logic for restarting binary search, see documentation for details +TRAFFICGEN_XENA_RFC2544_BINARY_RESTART_SMART_SEARCH = True + +# Xena Continuous traffic options +# Please reference xena documentation before making changes to these settings +TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = True +TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3 + # Xena Configuration -- END ########################### @@ -390,4 +429,40 @@ TRAFFICGEN_MOONGEN_PORTS = '' TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '' # MoonGen Configuration and Connection Info-- END -################################################### +################################################# + +################################################ +# Trex Configuration and Connection Info-- BEGIN + +# Example: TRAFFICGEN_TREX_HOST_IP_ADDR = "192.10.1.1" +# Example: TRAFFICGEN_TREX_USER = 'root' +# Example: TRAFFICGEN_TREX_BASE_DIR = '/traffic_gen/trex/' +# Example: TRAFFICGEN_TREX_PORT1 = '00:00:00:00:00:00' +TRAFFICGEN_TREX_HOST_IP_ADDR = '' +TRAFFICGEN_TREX_USER = '' +TRAFFICGEN_TREX_BASE_DIR = '' +TRAFFICGEN_TREX_PORT1 = '' +TRAFFICGEN_TREX_PORT2 = '' +# RFC2544 Throughput execution will end after threshold below is reached. +# It defines maximal difference between frame rate of successful (i.e. defined +# frameloss reached) and unsuccessful (i.e. frameloss exceeded) iterations. +TRAFFICGEN_TREX_RFC2544_TPUT_THRESHOLD = 0.05 +# Latency statistics are collected by separate stream created for each interface. +# Parameter below defines frequency of packets used for latency measurement in PPS. +# Value 0 will disable latency specific streams. +TRAFFICGEN_TREX_LATENCY_PPS = 1000 +# Example 10 Gbps: TRAFFICGEN_TREXINE_SPEED_GBPS = '10' +# Today only 10 Gbps is supported +TRAFFICGEN_TREX_LINE_SPEED_GBPS = '10' +# FOR SR-IOV or multistream layer 2 tests to work with T-Rex enable Promiscuous mode +TRAFFICGEN_TREX_PROMISCUOUS=False +PATHS['trafficgen'] = { + 'trex': { + 'type' : 'src', + 'src': { + 'path': os.path.join(ROOT_DIR, 'src/trex/trex/scripts/automation/trex_control_plane/stl') + } + } +} +# TREX Configuration and Connection Info-- END +##############################################