X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=conf%2F03_traffic.conf;h=6cfbbf2313b9b4263641608284082119869e2678;hb=b1534957e463b5e34957a8d48ce5c6b0552ffbb4;hp=179ff3e2ff62ad253f2cba47419c441261055b08;hpb=7608b5f5b73af88bd22e1825a013cbcd123050ac;p=vswitchperf.git

diff --git a/conf/03_traffic.conf b/conf/03_traffic.conf
index 179ff3e2..6cfbbf23 100644
--- a/conf/03_traffic.conf
+++ b/conf/03_traffic.conf
@@ -71,6 +71,18 @@ LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log'
 #                         "IP"   - flow is defined by ingress ports
 #                                  and src and dst IP addresses
 #                      Default value: "port"
+#    'flow_control'  - Controls flow control support by traffic generator.
+#                      Supported values:
+#                         False  - flow control is disabled
+#                         True   - flow control is enabled
+#                      Default value: False
+#                      Note: Currently it is supported by IxNet only
+#    'learning_frames' - Controls learning frames support by traffic generator.
+#                      Supported values:
+#                         False  - learning freames are disabled
+#                         True   - learning freames are enabled
+#                      Default value: True
+#                      Note: Currently it is supported by IxNet only
 #    'l2'            - A dictionary with l2 network layer details. Supported
 #                      values are:
 #        'srcmac'    - Specifies source MAC address filled by traffic generator.
@@ -143,7 +155,8 @@ TRAFFIC = {
     'stream_type' : 'L4',
     'pre_installed_flows' : 'No',           # used by vswitch implementation
     'flow_type' : 'port',                   # used by vswitch implementation
-
+    'flow_control' : False,                 # supported only by IxNet
+    'learning_frames' : True,               # supported only by IxNet
     'l2': {
         'framesize': 64,
         'srcmac': '00:00:00:00:00:00',
@@ -430,6 +443,10 @@ TRAFFICGEN_TREX_USER = ''
 TRAFFICGEN_TREX_BASE_DIR = ''
 TRAFFICGEN_TREX_PORT1 = ''
 TRAFFICGEN_TREX_PORT2 = ''
+# RFC2544 Throughput execution will end after threshold below is reached.
+# It defines maximal difference between frame rate of successful (i.e. defined
+# frameloss reached) and unsuccessful (i.e. frameloss exceeded) iterations.
+TRAFFICGEN_TREX_RFC2544_TPUT_THRESHOLD = 0.05
 # Latency statistics are collected by separate stream created for each interface.
 # Parameter below defines frequency of packets used for latency measurement in PPS.
 # Value 0 will disable latency specific streams.
@@ -437,6 +454,8 @@ TRAFFICGEN_TREX_LATENCY_PPS = 1000
 # Example 10 Gbps: TRAFFICGEN_TREXINE_SPEED_GBPS = '10'
 # Today only 10 Gbps is supported
 TRAFFICGEN_TREX_LINE_SPEED_GBPS = '10'
+# FOR SR-IOV or multistream layer 2 tests to work with T-Rex enable Promiscuous mode
+TRAFFICGEN_TREX_PROMISCUOUS=False
 PATHS['trafficgen'] = {
     'trex': {
         'type' : 'src',