X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=conf%2F01_testcases.conf;h=dcef306ce4d55622432c2fb7d86ac06cdca044c1;hb=463a1fd56b516687dc4714ad87685530a0e9b8d1;hp=39e924bd707c9916e0f91c49c62506febc3727f3;hpb=89e23da8e473387b2e6cb37a2b882d2d3c68655c;p=vswitchperf.git

diff --git a/conf/01_testcases.conf b/conf/01_testcases.conf
index 39e924bd..dcef306c 100755
--- a/conf/01_testcases.conf
+++ b/conf/01_testcases.conf
@@ -20,20 +20,59 @@
 # "Name": "phy2phy_burst",         # A human-readable string identifying the
 #                                  # test.
 # "Traffic Type": "rfc2544",       # One of the supported traffic types.
+#                                  # It can be overridden by cli option traffic_type.
+#                                  # Default value is "rfc2544".
 # "Deployment": "p2p",             # One of the supported deployment scenarios.
 # "Description": "Lorem ipsum..."  # Optional. A human-readable string
 #                                  # describing the test.
 # "Frame Modification": "vlan"     # One of the supported frame modifications:
 #                                  # vlan, mpls, mac, dscp, ttl, ip_addr,
 #                                  # ip_port.
-# "biDirectional": [true|false],   # Specifies if genearted traffic will be
+# "biDirectional": [true|false],   # Specifies if generated traffic will be
 #                                  # full-duplex (true) or half-duplex (false)
+#                                  # It can be overridden by cli option bidirectional.
+#                                  # Default value is "false".
 # "MultiStream": 0-65535           # Optional. Defines number of flows simulated
 #                                  # by traffic generator. Value 0 disables
 #                                  # MultiStream feature
+#                                  # It can be overridden by cli option multistream.
+# "Stream Type": ["L2"|"L3"|"L4"]  # Optional. Stream Type is an extension
+#                                  # of the "MultiStream" feature. If MultiStream
+#                                  # is disabled, then Stream Type will be ignored.
+#                                  # Stream Type defines ISO OSI network layer
+#                                  # used for simulation of multiple streams.
+#                                  # It can be overridden by cli option stream_type.
+#                                  # Values:
+#                                  #    "L2" - iteration of destination MAC address
+#                                  #    "L3" - iteration of destination IP address
+#                                  #    "L4" - iteration of destination UDP port
+#                                  # Default value is "L4".
+# "Pre-installed Flows": ["Yes"|"No"]
+#                                  # Optional. Pre-installed Flows is an extension
+#                                  # of the "MultiStream" feature. If MultiStream
+#                                  # is disabled, then Pre-installed Flows will be
+#                                  # ignored. It defines if stream specific flows
+#                                  # will be inserted into OVS or not.
+#                                  # It can be overridden by cli option
+#                                  # pre-installed_flows
+#                                  # Values:
+#                                  #    "Yes" - flows will be inserted into OVS
+#                                  #    "No"  - flows won't be inserted into OVS
+#                                  # Default value is "No".
+# "Flow Type": ["port"|"IP"]       # Optional. Defines flows complexity. In case
+#                                  # it isn't specified, then "port" will be used.
+#                                  # Values:
+#                                  #    "port" - flow is defined by ingress ports
+#                                  #    "IP"   - flow is defined by ingress ports
+#                                  #             and src and dst IP addresses
+# "iLoad": 0-100                   # Optional. Defines desired percentage
+#                                  # of frame rate used during continuous stream
+#                                  # tests. Can be overridden by cli option
+#                                  # iload.
+#                                  # Default value is 100.
 # "Load": dictionary               # Optional. Configures background load
 #                                  # during testcase execution.
-#   Descritopn of "Load" dictionary keys, their meanings and available values:
+#   Description of "Load" dictionary keys, their meanings and available values:
 #
 #   "tool": "stress"               # One of the supported load generators.
 #   "load": 0-100                  # percentage of cores which should be
@@ -90,8 +129,25 @@ PERFORMANCE_TESTS = [
         "Name": "phy2phy_cont",
         "Traffic Type": "continuous",
         "Deployment": "p2p",
-        "Description": "RFC2544 Phy2Phy Continuous Stream",
+        "Description": "Phy2Phy Continuous Stream",
         "biDirectional": "True",
+        "iLoad": "100",
+    },
+    {
+        "Name": "pvp_cont",
+        "Traffic Type": "continuous",
+        "Deployment": "pvp",
+        "Description": "PVP Continuous Stream",
+        "biDirectional": "True",
+        "iLoad": "100",
+    },
+    {
+        "Name": "pvvp_cont",
+        "Traffic Type": "continuous",
+        "Deployment": "pvvp",
+        "Description": "PVVP Continuous Stream",
+        "biDirectional": "True",
+        "iLoad": "100",
     },
     {
         "Name": "phy2phy_scalability",