X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=VNFs%2FDPPD-PROX%2Fprox_port_cfg.c;h=a538be4f920c391517b7ca47a0ea23c2604187bd;hb=3d17d9c7e0daae0b82973283a23f3e85d0decabd;hp=fc4971f1e2584c220318039ad3b9ca3afe47a0d6;hpb=2aa21bfc505f582b11754c3086685a2fa355fee2;p=samplevnf.git

diff --git a/VNFs/DPPD-PROX/prox_port_cfg.c b/VNFs/DPPD-PROX/prox_port_cfg.c
index fc4971f1..a538be4f 100644
--- a/VNFs/DPPD-PROX/prox_port_cfg.c
+++ b/VNFs/DPPD-PROX/prox_port_cfg.c
@@ -311,6 +311,20 @@ uint8_t init_rte_ring_dev(void)
 
 static void print_port_capa(struct prox_port_cfg *port_cfg)
 {
+	uint8_t port_id;
+
+	port_id = port_cfg - prox_port_cfg;
+	plog_info("\t*** Initializing port %u ***\n", port_id);
+	plog_info("\t\tPort name is set to %s\n", port_cfg->name);
+	plog_info("\t\tPort max RX/TX queue is %u/%u\n", port_cfg->max_rxq, port_cfg->max_txq);
+	plog_info("\t\tPort driver is %s\n", port_cfg->driver_name);
+#if RTE_VERSION >= RTE_VERSION_NUM(16,4,0,0)
+	plog_info("\t\tSupported speed mask = 0x%x\n", port_cfg->dev_info.speed_capa);
+#endif
+	if (port_cfg->max_link_speed != UINT32_MAX) {
+		plog_info("\t\tHighest link speed capa = %d Mbps\n", port_cfg->max_link_speed);
+	}
+
 #if RTE_VERSION >= RTE_VERSION_NUM(18,8,0,1)
 	plog_info("\t\tRX offload capa = 0x%lx = ", port_cfg->dev_info.rx_offload_capa);
 	if (port_cfg->dev_info.rx_offload_capa & DEV_RX_OFFLOAD_VLAN_STRIP)
@@ -396,6 +410,48 @@ static void print_port_capa(struct prox_port_cfg *port_cfg)
 #endif
 }
 
+static void get_max_link_speed(struct prox_port_cfg *port_cfg)
+{
+	port_cfg->max_link_speed = UINT32_MAX;
+
+#if RTE_VERSION >= RTE_VERSION_NUM(16,4,0,0)
+	// virtio and vmxnet3 reports fake max_link_speed
+	if (strcmp(port_cfg->short_name, "vmxnet3") && strcmp(port_cfg->short_name, "virtio")) {
+		// Get link_speed from highest capability from the port
+		// This will be used by gen and lat for extrapolation purposes
+		// The negotiated link_speed (as reported by rte_eth_link_get
+		// or rte_eth_link_get_nowait) might be reported too late
+		// and might result in wrong exrapolation, and hence should not be used
+		// for extrapolation purposes
+		if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_100G)
+			port_cfg->max_link_speed = ETH_SPEED_NUM_100G;
+		else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_56G)
+			port_cfg->max_link_speed = ETH_SPEED_NUM_56G;
+		else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_50G)
+			port_cfg->max_link_speed = ETH_SPEED_NUM_50G;
+		else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_40G)
+			port_cfg->max_link_speed = ETH_SPEED_NUM_40G;
+		else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_25G)
+			port_cfg->max_link_speed = ETH_SPEED_NUM_25G;
+		else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_20G)
+			port_cfg->max_link_speed = ETH_SPEED_NUM_20G;
+		else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_10G)
+			port_cfg->max_link_speed = ETH_SPEED_NUM_10G;
+		else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_5G)
+			port_cfg->max_link_speed = ETH_SPEED_NUM_5G;
+		else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_2_5G)
+			port_cfg->max_link_speed = ETH_SPEED_NUM_2_5G;
+		else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_1G)
+			port_cfg->max_link_speed = ETH_SPEED_NUM_1G;
+		else if (port_cfg->dev_info.speed_capa & (ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M))
+			port_cfg->max_link_speed = ETH_SPEED_NUM_100M;
+		else if (port_cfg->dev_info.speed_capa & (ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M))
+			port_cfg->max_link_speed = ETH_SPEED_NUM_10M;
+
+	}
+#endif
+}
+
 static void init_port(struct prox_port_cfg *port_cfg)
 {
 	static char dummy_pool_name[] = "0_dummy";
@@ -403,15 +459,9 @@ static void init_port(struct prox_port_cfg *port_cfg)
 	uint8_t port_id;
 	int ret;
 
+	get_max_link_speed(port_cfg);
+	print_port_capa(port_cfg);
 	port_id = port_cfg - prox_port_cfg;
-	plog_info("\t*** Initializing port %u ***\n", port_id);
-	plog_info("\t\tPort name is set to %s\n", port_cfg->name);
-	plog_info("\t\tPort max RX/TX queue is %u/%u\n", port_cfg->max_rxq, port_cfg->max_txq);
-	plog_info("\t\tPort driver is %s\n", port_cfg->driver_name);
-#if RTE_VERSION >= RTE_VERSION_NUM(16,4,0,0)
-	plog_info("\t\tSupported speed mask = 0x%x\n", port_cfg->dev_info.speed_capa);
-#endif
-
 	PROX_PANIC(port_cfg->n_rxq == 0 && port_cfg->n_txq == 0,
 		   "\t\t port %u is enabled but no RX or TX queues have been configured", port_id);
 
@@ -449,8 +499,6 @@ static void init_port(struct prox_port_cfg *port_cfg)
 		}
 	}
 
-	print_port_capa(port_cfg);
-
 	if (port_cfg->n_rxq > 1)  {
 		// Enable RSS if multiple receive queues
 		port_cfg->port_conf.rxmode.mq_mode       		|= ETH_MQ_RX_RSS;
@@ -605,6 +653,7 @@ static void init_port(struct prox_port_cfg *port_cfg)
 
 	port_cfg->link_up = link.link_status;
 	port_cfg->link_speed = link.link_speed;
+
 	if (link.link_status) {
 		plog_info("Link Up - speed %'u Mbps - %s\n",
 			  link.link_speed,