X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;ds=sidebyside;f=qemu%2Futil%2Fosdep.c;fp=qemu%2Futil%2Fosdep.c;h=0092bb61b953da5a5f374bbc6b4b544a802bd892;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/util/osdep.c b/qemu/util/osdep.c new file mode 100644 index 000000000..0092bb61b --- /dev/null +++ b/qemu/util/osdep.c @@ -0,0 +1,430 @@ +/* + * QEMU low level functions + * + * Copyright (c) 2003 Fabrice Bellard + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* Needed early for CONFIG_BSD etc. */ +#include "config-host.h" + +#if defined(CONFIG_MADVISE) || defined(CONFIG_POSIX_MADVISE) +#include +#endif + +#ifdef CONFIG_SOLARIS +#include +#include +/* See MySQL bug #7156 (http://bugs.mysql.com/bug.php?id=7156) for + discussion about Solaris header problems */ +extern int madvise(caddr_t, size_t, int); +#endif + +#include "qemu-common.h" +#include "qemu/sockets.h" +#include "qemu/error-report.h" +#include "monitor/monitor.h" + +static bool fips_enabled = false; + +static const char *qemu_version = QEMU_VERSION; + +int socket_set_cork(int fd, int v) +{ +#if defined(SOL_TCP) && defined(TCP_CORK) + return qemu_setsockopt(fd, SOL_TCP, TCP_CORK, &v, sizeof(v)); +#else + return 0; +#endif +} + +int socket_set_nodelay(int fd) +{ + int v = 1; + return qemu_setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, &v, sizeof(v)); +} + +int qemu_madvise(void *addr, size_t len, int advice) +{ + if (advice == QEMU_MADV_INVALID) { + errno = EINVAL; + return -1; + } +#if defined(CONFIG_MADVISE) + return madvise(addr, len, advice); +#elif defined(CONFIG_POSIX_MADVISE) + return posix_madvise(addr, len, advice); +#else + errno = EINVAL; + return -1; +#endif +} + +#ifndef _WIN32 +/* + * Dups an fd and sets the flags + */ +static int qemu_dup_flags(int fd, int flags) +{ + int ret; + int serrno; + int dup_flags; + +#ifdef F_DUPFD_CLOEXEC + ret = fcntl(fd, F_DUPFD_CLOEXEC, 0); +#else + ret = dup(fd); + if (ret != -1) { + qemu_set_cloexec(ret); + } +#endif + if (ret == -1) { + goto fail; + } + + dup_flags = fcntl(ret, F_GETFL); + if (dup_flags == -1) { + goto fail; + } + + if ((flags & O_SYNC) != (dup_flags & O_SYNC)) { + errno = EINVAL; + goto fail; + } + + /* Set/unset flags that we can with fcntl */ + if (fcntl(ret, F_SETFL, flags) == -1) { + goto fail; + } + + /* Truncate the file in the cases that open() would truncate it */ + if (flags & O_TRUNC || + ((flags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))) { + if (ftruncate(ret, 0) == -1) { + goto fail; + } + } + + return ret; + +fail: + serrno = errno; + if (ret != -1) { + close(ret); + } + errno = serrno; + return -1; +} + +static int qemu_parse_fdset(const char *param) +{ + return qemu_parse_fd(param); +} +#endif + +/* + * Opens a file with FD_CLOEXEC set + */ +int qemu_open(const char *name, int flags, ...) +{ + int ret; + int mode = 0; + +#ifndef _WIN32 + const char *fdset_id_str; + + /* Attempt dup of fd from fd set */ + if (strstart(name, "/dev/fdset/", &fdset_id_str)) { + int64_t fdset_id; + int fd, dupfd; + + fdset_id = qemu_parse_fdset(fdset_id_str); + if (fdset_id == -1) { + errno = EINVAL; + return -1; + } + + fd = monitor_fdset_get_fd(fdset_id, flags); + if (fd == -1) { + return -1; + } + + dupfd = qemu_dup_flags(fd, flags); + if (dupfd == -1) { + return -1; + } + + ret = monitor_fdset_dup_fd_add(fdset_id, dupfd); + if (ret == -1) { + close(dupfd); + errno = EINVAL; + return -1; + } + + return dupfd; + } +#endif + + if (flags & O_CREAT) { + va_list ap; + + va_start(ap, flags); + mode = va_arg(ap, int); + va_end(ap); + } + +#ifdef O_CLOEXEC + ret = open(name, flags | O_CLOEXEC, mode); +#else + ret = open(name, flags, mode); + if (ret >= 0) { + qemu_set_cloexec(ret); + } +#endif + +#ifdef O_DIRECT + if (ret == -1 && errno == EINVAL && (flags & O_DIRECT)) { + error_report("file system may not support O_DIRECT"); + errno = EINVAL; /* in case it was clobbered */ + } +#endif /* O_DIRECT */ + + return ret; +} + +int qemu_close(int fd) +{ + int64_t fdset_id; + + /* Close fd that was dup'd from an fdset */ + fdset_id = monitor_fdset_dup_fd_find(fd); + if (fdset_id != -1) { + int ret; + + ret = close(fd); + if (ret == 0) { + monitor_fdset_dup_fd_remove(fd); + } + + return ret; + } + + return close(fd); +} + +/* + * A variant of write(2) which handles partial write. + * + * Return the number of bytes transferred. + * Set errno if fewer than `count' bytes are written. + * + * This function don't work with non-blocking fd's. + * Any of the possibilities with non-bloking fd's is bad: + * - return a short write (then name is wrong) + * - busy wait adding (errno == EAGAIN) to the loop + */ +ssize_t qemu_write_full(int fd, const void *buf, size_t count) +{ + ssize_t ret = 0; + ssize_t total = 0; + + while (count) { + ret = write(fd, buf, count); + if (ret < 0) { + if (errno == EINTR) + continue; + break; + } + + count -= ret; + buf += ret; + total += ret; + } + + return total; +} + +/* + * Opens a socket with FD_CLOEXEC set + */ +int qemu_socket(int domain, int type, int protocol) +{ + int ret; + +#ifdef SOCK_CLOEXEC + ret = socket(domain, type | SOCK_CLOEXEC, protocol); + if (ret != -1 || errno != EINVAL) { + return ret; + } +#endif + ret = socket(domain, type, protocol); + if (ret >= 0) { + qemu_set_cloexec(ret); + } + + return ret; +} + +/* + * Accept a connection and set FD_CLOEXEC + */ +int qemu_accept(int s, struct sockaddr *addr, socklen_t *addrlen) +{ + int ret; + +#ifdef CONFIG_ACCEPT4 + ret = accept4(s, addr, addrlen, SOCK_CLOEXEC); + if (ret != -1 || errno != ENOSYS) { + return ret; + } +#endif + ret = accept(s, addr, addrlen); + if (ret >= 0) { + qemu_set_cloexec(ret); + } + + return ret; +} + +void qemu_set_version(const char *version) +{ + qemu_version = version; +} + +const char *qemu_get_version(void) +{ + return qemu_version; +} + +void fips_set_state(bool requested) +{ +#ifdef __linux__ + if (requested) { + FILE *fds = fopen("/proc/sys/crypto/fips_enabled", "r"); + if (fds != NULL) { + fips_enabled = (fgetc(fds) == '1'); + fclose(fds); + } + } +#else + fips_enabled = false; +#endif /* __linux__ */ + +#ifdef _FIPS_DEBUG + fprintf(stderr, "FIPS mode %s (requested %s)\n", + (fips_enabled ? "enabled" : "disabled"), + (requested ? "enabled" : "disabled")); +#endif +} + +bool fips_get_state(void) +{ + return fips_enabled; +} + +#ifdef _WIN32 +static void socket_cleanup(void) +{ + WSACleanup(); +} +#endif + +int socket_init(void) +{ +#ifdef _WIN32 + WSADATA Data; + int ret, err; + + ret = WSAStartup(MAKEWORD(2, 2), &Data); + if (ret != 0) { + err = WSAGetLastError(); + fprintf(stderr, "WSAStartup: %d\n", err); + return -1; + } + atexit(socket_cleanup); +#endif + return 0; +} + +#if !GLIB_CHECK_VERSION(2, 31, 0) +/* Ensure that glib is running in multi-threaded mode + * Old versions of glib require explicit initialization. Failure to do + * this results in the single-threaded code paths being taken inside + * glib. For example, the g_slice allocator will not be thread-safe + * and cause crashes. + */ +static void __attribute__((constructor)) thread_init(void) +{ + if (!g_thread_supported()) { + g_thread_init(NULL); + } +} +#endif + +#ifndef CONFIG_IOVEC +/* helper function for iov_send_recv() */ +static ssize_t +readv_writev(int fd, const struct iovec *iov, int iov_cnt, bool do_write) +{ + unsigned i = 0; + ssize_t ret = 0; + while (i < iov_cnt) { + ssize_t r = do_write + ? write(fd, iov[i].iov_base, iov[i].iov_len) + : read(fd, iov[i].iov_base, iov[i].iov_len); + if (r > 0) { + ret += r; + } else if (!r) { + break; + } else if (errno == EINTR) { + continue; + } else { + /* else it is some "other" error, + * only return if there was no data processed. */ + if (ret == 0) { + ret = -1; + } + break; + } + i++; + } + return ret; +} + +ssize_t +readv(int fd, const struct iovec *iov, int iov_cnt) +{ + return readv_writev(fd, iov, iov_cnt, false); +} + +ssize_t +writev(int fd, const struct iovec *iov, int iov_cnt) +{ + return readv_writev(fd, iov, iov_cnt, true); +} +#endif