X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;ds=sidebyside;f=kernel%2Fdrivers%2Fspi%2Fspi-img-spfi.c;h=823cbc92d1e75447b1487158ac097e1de3d50470;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=788e2b176a4f7707051bcc325538e7d2a6d599f4;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/kernel/drivers/spi/spi-img-spfi.c b/kernel/drivers/spi/spi-img-spfi.c
index 788e2b176..823cbc92d 100644
--- a/kernel/drivers/spi/spi-img-spfi.c
+++ b/kernel/drivers/spi/spi-img-spfi.c
@@ -40,6 +40,7 @@
 #define SPFI_CONTROL_SOFT_RESET			BIT(11)
 #define SPFI_CONTROL_SEND_DMA			BIT(10)
 #define SPFI_CONTROL_GET_DMA			BIT(9)
+#define SPFI_CONTROL_SE			BIT(8)
 #define SPFI_CONTROL_TMODE_SHIFT		5
 #define SPFI_CONTROL_TMODE_MASK			0x7
 #define SPFI_CONTROL_TMODE_SINGLE		0
@@ -104,6 +105,10 @@ struct img_spfi {
 	bool rx_dma_busy;
 };
 
+struct img_spfi_device_data {
+	bool gpio_requested;
+};
+
 static inline u32 spfi_readl(struct img_spfi *spfi, u32 reg)
 {
 	return readl(spfi->regs + reg);
@@ -266,15 +271,15 @@ static int img_spfi_start_pio(struct spi_master *master,
 		cpu_relax();
 	}
 
-	ret = spfi_wait_all_done(spfi);
-	if (ret < 0)
-		return ret;
-
 	if (rx_bytes > 0 || tx_bytes > 0) {
 		dev_err(spfi->dev, "PIO transfer timed out\n");
 		return -ETIMEDOUT;
 	}
 
+	ret = spfi_wait_all_done(spfi);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
@@ -439,21 +444,50 @@ static int img_spfi_unprepare(struct spi_master *master,
 
 static int img_spfi_setup(struct spi_device *spi)
 {
-	int ret;
-
-	ret = gpio_request_one(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ?
-			       GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
-			       dev_name(&spi->dev));
-	if (ret)
-		dev_err(&spi->dev, "can't request chipselect gpio %d\n",
+	int ret = -EINVAL;
+	struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi);
+
+	if (!spfi_data) {
+		spfi_data = kzalloc(sizeof(*spfi_data), GFP_KERNEL);
+		if (!spfi_data)
+			return -ENOMEM;
+		spfi_data->gpio_requested = false;
+		spi_set_ctldata(spi, spfi_data);
+	}
+	if (!spfi_data->gpio_requested) {
+		ret = gpio_request_one(spi->cs_gpio,
+				       (spi->mode & SPI_CS_HIGH) ?
+				       GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
+				       dev_name(&spi->dev));
+		if (ret)
+			dev_err(&spi->dev, "can't request chipselect gpio %d\n",
 				spi->cs_gpio);
-
+		else
+			spfi_data->gpio_requested = true;
+	} else {
+		if (gpio_is_valid(spi->cs_gpio)) {
+			int mode = ((spi->mode & SPI_CS_HIGH) ?
+				    GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH);
+
+			ret = gpio_direction_output(spi->cs_gpio, mode);
+			if (ret)
+				dev_err(&spi->dev, "chipselect gpio %d setup failed (%d)\n",
+					spi->cs_gpio, ret);
+		}
+	}
 	return ret;
 }
 
 static void img_spfi_cleanup(struct spi_device *spi)
 {
-	gpio_free(spi->cs_gpio);
+	struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi);
+
+	if (spfi_data) {
+		if (spfi_data->gpio_requested)
+			gpio_free(spi->cs_gpio);
+		kfree(spfi_data);
+		spi_set_ctldata(spi, NULL);
+	}
 }
 
 static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
@@ -491,6 +525,7 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
 	else if (xfer->tx_nbits == SPI_NBITS_QUAD &&
 		 xfer->rx_nbits == SPI_NBITS_QUAD)
 		val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT;
+	val |= SPFI_CONTROL_SE;
 	spfi_writel(spfi, val, SPFI_CONTROL);
 }
 
@@ -546,6 +581,7 @@ static int img_spfi_probe(struct platform_device *pdev)
 	struct img_spfi *spfi;
 	struct resource *res;
 	int ret;
+	u32 max_speed_hz;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(*spfi));
 	if (!master)
@@ -610,6 +646,19 @@ static int img_spfi_probe(struct platform_device *pdev)
 	master->max_speed_hz = clk_get_rate(spfi->spfi_clk) / 4;
 	master->min_speed_hz = clk_get_rate(spfi->spfi_clk) / 512;
 
+	/*
+	 * Maximum speed supported by spfi is limited to the lower value
+	 * between 1/4 of the SPFI clock or to "spfi-max-frequency"
+	 * defined in the device tree.
+	 * If no value is defined in the device tree assume the maximum
+	 * speed supported to be 1/4 of the SPFI clock.
+	 */
+	if (!of_property_read_u32(spfi->dev->of_node, "spfi-max-frequency",
+				  &max_speed_hz)) {
+		if (master->max_speed_hz > max_speed_hz)
+			master->max_speed_hz = max_speed_hz;
+	}
+
 	master->setup = img_spfi_setup;
 	master->cleanup = img_spfi_cleanup;
 	master->transfer_one = img_spfi_transfer_one;