X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;ds=sidebyside;f=kernel%2Fdrivers%2Fnet%2Farcnet%2Farc-rawmode.c;h=d78f30186642e299d803fa98fa6fd8001b2d831b;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=705e6ce2eb90b9debb4e635af396ddfdbb53a594;hpb=f93b97fd65072de626c074dbe099a1fff05ce060;p=kvmfornfv.git diff --git a/kernel/drivers/net/arcnet/arc-rawmode.c b/kernel/drivers/net/arcnet/arc-rawmode.c index 705e6ce2e..d78f30186 100644 --- a/kernel/drivers/net/arcnet/arc-rawmode.c +++ b/kernel/drivers/net/arcnet/arc-rawmode.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers) - * + * * Written 1994-1999 by Avery Pennarun. * Derived from skeleton.c by Donald Becker. * @@ -24,6 +24,8 @@ * ********************** */ +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -31,58 +33,7 @@ #include #include #include -#include - -#define VERSION "arcnet: raw mode (`r') encapsulation support loaded.\n" - - -static void rx(struct net_device *dev, int bufnum, - struct archdr *pkthdr, int length); -static int build_header(struct sk_buff *skb, struct net_device *dev, - unsigned short type, uint8_t daddr); -static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, - int bufnum); - -static struct ArcProto rawmode_proto = -{ - .suffix = 'r', - .mtu = XMTU, - .rx = rx, - .build_header = build_header, - .prepare_tx = prepare_tx, - .continue_tx = NULL, - .ack_tx = NULL -}; - - -static int __init arcnet_raw_init(void) -{ - int count; - - printk(VERSION); - - for (count = 0; count < 256; count++) - if (arc_proto_map[count] == arc_proto_default) - arc_proto_map[count] = &rawmode_proto; - - /* for raw mode, we only set the bcast proto if there's no better one */ - if (arc_bcast_proto == arc_proto_default) - arc_bcast_proto = &rawmode_proto; - - arc_proto_default = &rawmode_proto; - return 0; -} - -static void __exit arcnet_raw_exit(void) -{ - arcnet_unregister_proto(&rawmode_proto); -} - -module_init(arcnet_raw_init); -module_exit(arcnet_raw_exit); - -MODULE_LICENSE("GPL"); - +#include "arcdevice.h" /* packet receiver */ static void rx(struct net_device *dev, int bufnum, @@ -93,7 +44,7 @@ static void rx(struct net_device *dev, int bufnum, struct archdr *pkt = pkthdr; int ofs; - BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length); + arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length); if (length > MTU) ofs = 512 - length; @@ -101,15 +52,14 @@ static void rx(struct net_device *dev, int bufnum, ofs = 256 - length; skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); - if (skb == NULL) { - BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n"); + if (!skb) { dev->stats.rx_dropped++; return; } skb_put(skb, length + ARC_HDR_SIZE); skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; skb_reset_mac_header(skb); skb_pull(skb, ARC_HDR_SIZE); @@ -121,38 +71,35 @@ static void rx(struct net_device *dev, int bufnum, pkt->soft.raw + sizeof(pkt->soft), length - sizeof(pkt->soft)); - BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx"); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); skb->protocol = cpu_to_be16(ETH_P_ARCNET); netif_rx(skb); } - -/* - * Create the ARCnet hard/soft headers for raw mode. +/* Create the ARCnet hard/soft headers for raw mode. * There aren't any soft headers in raw mode - not even the protocol id. */ static int build_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, uint8_t daddr) { int hdr_size = ARC_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); - /* - * Set the source hardware address. + /* Set the source hardware address. * * This is pretty pointless for most purposes, but it can help in - * debugging. ARCnet does not allow us to change the source address in - * the actual packet sent) + * debugging. ARCnet does not allow us to change the source address + * in the actual packet sent. */ pkt->hard.source = *dev->dev_addr; /* see linux/net/ethernet/eth.c to see where I got the following */ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { - /* - * FIXME: fill in the last byte of the dest ipaddr here to better - * comply with RFC1051 in "noarp" mode. + /* FIXME: fill in the last byte of the dest ipaddr here + * to better comply with RFC1051 in "noarp" mode. */ pkt->hard.dest = 0; return hdr_size; @@ -163,7 +110,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, return hdr_size; /* success */ } - static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum) { @@ -171,15 +117,16 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, struct arc_hardware *hard = &pkt->hard; int ofs; - BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n", - lp->next_tx, lp->cur_tx, bufnum); + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); - length -= ARC_HDR_SIZE; /* hard header is not included in packet length */ + /* hard header is not included in packet length */ + length -= ARC_HDR_SIZE; if (length > XMTU) { /* should never happen! other people already check for this. */ - BUGMSG(D_NORMAL, "Bug! prepare_tx with size %d (> %d)\n", - length, XMTU); + arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n", + length, XMTU); length = XMTU; } if (length >= MinTU) { @@ -188,11 +135,12 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, } else if (length > MTU) { hard->offset[0] = 0; hard->offset[1] = ofs = 512 - length - 3; - } else + } else { hard->offset[0] = ofs = 256 - length; + } - BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n", - length,ofs); + arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n", + length, ofs); lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length); @@ -201,3 +149,41 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, return 1; /* done */ } + +static struct ArcProto rawmode_proto = { + .suffix = 'r', + .mtu = XMTU, + .rx = rx, + .build_header = build_header, + .prepare_tx = prepare_tx, + .continue_tx = NULL, + .ack_tx = NULL +}; + +static int __init arcnet_raw_init(void) +{ + int count; + + pr_info("raw mode (`r') encapsulation support loaded\n"); + + for (count = 0; count < 256; count++) + if (arc_proto_map[count] == arc_proto_default) + arc_proto_map[count] = &rawmode_proto; + + /* for raw mode, we only set the bcast proto if there's no better one */ + if (arc_bcast_proto == arc_proto_default) + arc_bcast_proto = &rawmode_proto; + + arc_proto_default = &rawmode_proto; + return 0; +} + +static void __exit arcnet_raw_exit(void) +{ + arcnet_unregister_proto(&rawmode_proto); +} + +module_init(arcnet_raw_init); +module_exit(arcnet_raw_exit); + +MODULE_LICENSE("GPL");