X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;ds=sidebyside;f=kernel%2Farch%2Fcris%2Farch-v32%2FKconfig;h=17dbe03af5f4d1f61e4e60c24d48d284849a78f5;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=21bbd93be34f3732986d228d5139df43182058cb;hpb=f93b97fd65072de626c074dbe099a1fff05ce060;p=kvmfornfv.git

diff --git a/kernel/arch/cris/arch-v32/Kconfig b/kernel/arch/cris/arch-v32/Kconfig
index 21bbd93be..17dbe03af 100644
--- a/kernel/arch/cris/arch-v32/Kconfig
+++ b/kernel/arch/cris/arch-v32/Kconfig
@@ -10,95 +10,6 @@ config ETRAX_DRAM_VIRTUAL_BASE
 	depends on ETRAX_ARCH_V32
 	default "c0000000"
 
-choice
-	prompt "Nbr of Ethernet LED groups"
-	depends on ETRAX_ARCH_V32
-	default ETRAX_NBR_LED_GRP_ONE
-	help
-	  Select how many Ethernet LED groups that can be used. Usually one per Ethernet
-	  interface is a good choice.
-
-config	ETRAX_NBR_LED_GRP_ZERO
-	bool "Use zero LED groups"
-	help
-	  Select this if you do not want any Ethernet LEDs.
-
-config	ETRAX_NBR_LED_GRP_ONE
-	bool "Use one LED group"
-	help
-	  Select this if you want one Ethernet LED group. This LED group
-	  can be used for one or more Ethernet interfaces. However, it is
-	  recommended that each Ethernet interface use a dedicated LED group.
-
-config	ETRAX_NBR_LED_GRP_TWO
-	bool "Use two LED groups"
-	help
-	  Select this if you want two Ethernet LED groups. This is the
-	  best choice if you have more than one Ethernet interface and
-	  would like to have separate LEDs for the interfaces.
-
-endchoice
-
-config ETRAX_LED_G_NET0
-	string "Ethernet LED group 0 green LED bit"
-	depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)
-	default "PA3"
-	help
-	  Bit to use for the green LED in Ethernet LED group 0.
-
-config ETRAX_LED_R_NET0
-	string "Ethernet LED group 0 red LED bit"
-	depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)
-	default "PA4"
-	help
-	  Bit to use for the red LED in Ethernet LED group 0.
-
-config ETRAX_LED_G_NET1
-	string "Ethernet group 1 green LED bit"
-	depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO
-	default ""
-	help
-	  Bit to use for the green LED in Ethernet LED group 1.
-
-config ETRAX_LED_R_NET1
-	string "Ethernet group 1 red LED bit"
-	depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO
-	default ""
-	help
-	  Bit to use for the red LED in Ethernet LED group 1.
-
-config ETRAX_V32_LED2G
-	string "Second green LED bit"
-	depends on ETRAX_ARCH_V32
-	default "PA5"
-	help
-	  Bit to use for the first green LED (status LED).
-	  Most Axis products use bit A5 here.
-
-config ETRAX_V32_LED2R
-	string "Second red LED bit"
-	depends on ETRAX_ARCH_V32
-	default "PA6"
-	help
-	  Bit to use for the first red LED (network LED).
-	  Most Axis products use bit A6 here.
-
-config ETRAX_V32_LED3G
-	string "Third green LED bit"
-	depends on ETRAX_ARCH_V32
-	default "PA7"
-	help
-	  Bit to use for the first green LED (drive/power LED).
-	  Most Axis products use bit A7 here.
-
-config ETRAX_V32_LED3R
-	string "Third red LED bit"
-	depends on ETRAX_ARCH_V32
-	default "PA7"
-	help
-	  Bit to use for the first red LED (drive/power LED).
-	  Most Axis products use bit A7 here.
-
 choice
 	prompt "Kernel GDB port"
 	depends on ETRAX_KGDB