X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;ds=sidebyside;f=kernel%2FDocumentation%2Fhwmon%2Fadm1275;h=d697229e3c18e2571f4846eb8801094daf52eb2e;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=15b4a20d5062f4e3872135557f6740da6c9408cf;hpb=f93b97fd65072de626c074dbe099a1fff05ce060;p=kvmfornfv.git

diff --git a/kernel/Documentation/hwmon/adm1275 b/kernel/Documentation/hwmon/adm1275
index 15b4a20d5..d697229e3 100644
--- a/kernel/Documentation/hwmon/adm1275
+++ b/kernel/Documentation/hwmon/adm1275
@@ -14,6 +14,10 @@ Supported chips:
     Prefix: 'adm1276'
     Addresses scanned: -
     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
+  * Analog Devices ADM1293/ADM1294
+    Prefix: 'adm1293', 'adm1294'
+    Addresses scanned: -
+    Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
 
 Author: Guenter Roeck <linux@roeck-us.net>
 
@@ -22,12 +26,12 @@ Description
 -----------
 
 This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
-and ADM1276 Hot-Swap Controller and Digital Power Monitor.
+ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
 
-ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
-board to be removed from or inserted into a live backplane. They also feature
-current and voltage readback via an integrated 12-bit analog-to-digital
-converter (ADC), accessed using a PMBus interface.
+ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that
+allow a circuit board to be removed from or inserted into a live backplane.
+They also feature current and voltage readback via an integrated 12
+bit analog-to-digital converter (ADC), accessed using a PMBus interface.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -58,16 +62,16 @@ Sysfs entries
 The following attributes are supported. Limits are read-write, history reset
 attributes are write-only, all other attributes are read-only.
 
-in1_label		"vin1" or "vout1" depending on chip variant and
-			configuration. On ADM1075, vout1 reports the voltage on
-			the VAUX pin.
-in1_input		Measured voltage.
-in1_min			Minimum Voltage.
-in1_max			Maximum voltage.
-in1_min_alarm		Voltage low alarm.
-in1_max_alarm		Voltage high alarm.
-in1_highest		Historical maximum voltage.
-in1_reset_history	Write any value to reset history.
+inX_label		"vin1" or "vout1" depending on chip variant and
+			configuration. On ADM1075, ADM1293, and ADM1294,
+			vout1 reports the voltage on the VAUX pin.
+inX_input		Measured voltage.
+inX_min			Minimum Voltage.
+inX_max			Maximum voltage.
+inX_min_alarm		Voltage low alarm.
+inX_max_alarm		Voltage high alarm.
+inX_highest		Historical maximum voltage.
+inX_reset_history	Write any value to reset history.
 
 curr1_label		"iout1"
 curr1_input		Measured current.
@@ -86,7 +90,9 @@ curr1_reset_history	Write any value to reset history.
 
 power1_label		"pin1"
 power1_input		Input power.
+power1_input_lowest	Lowest observed input power. ADM1293 and ADM1294 only.
+power1_input_highest	Highest observed input power.
 power1_reset_history	Write any value to reset history.
 
-			Power attributes are supported on ADM1075 and ADM1276
-			only.
+			Power attributes are supported on ADM1075, ADM1276,
+			ADM1293, and ADM1294.