X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;ds=inline;f=kernel%2Farch%2Fia64%2Fsn%2Fpci%2Ftioce_provider.c;fp=kernel%2Farch%2Fia64%2Fsn%2Fpci%2Ftioce_provider.c;h=46d3df4b03a160f4462e9282626661f981a76ee7;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/arch/ia64/sn/pci/tioce_provider.c b/kernel/arch/ia64/sn/pci/tioce_provider.c new file mode 100644 index 000000000..46d3df4b0 --- /dev/null +++ b/kernel/arch/ia64/sn/pci/tioce_provider.c @@ -0,0 +1,1062 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * 1/26/2006 + * + * WAR for SGI PV 944642. For revA TIOCE, need to use the following recipe + * (taken from the above PV) before and after accessing tioce internal MMR's + * to avoid tioce lockups. + * + * The recipe as taken from the PV: + * + * if(mmr address < 0x45000) { + * if(mmr address == 0 or 0x80) + * mmr wrt or read address 0xc0 + * else if(mmr address == 0x148 or 0x200) + * mmr wrt or read address 0x28 + * else + * mmr wrt or read address 0x158 + * + * do desired mmr access (rd or wrt) + * + * if(mmr address == 0x100) + * mmr wrt or read address 0x38 + * mmr wrt or read address 0xb050 + * } else + * do desired mmr access + * + * According to hw, we can use reads instead of writes to the above address + * + * Note this WAR can only to be used for accessing internal MMR's in the + * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the + * "Local CE Registers and Memories" and "PCI Compatible Config Space" address + * spaces from table 2-1 of the "CE Programmer's Reference Overview" document. + * + * All registers defined in struct tioce will meet that criteria. + */ + +static void inline +tioce_mmr_war_pre(struct tioce_kernel *kern, void __iomem *mmr_addr) +{ + u64 mmr_base; + u64 mmr_offset; + + if (kern->ce_common->ce_rev != TIOCE_REV_A) + return; + + mmr_base = kern->ce_common->ce_pcibus.bs_base; + mmr_offset = (unsigned long)mmr_addr - mmr_base; + + if (mmr_offset < 0x45000) { + u64 mmr_war_offset; + + if (mmr_offset == 0 || mmr_offset == 0x80) + mmr_war_offset = 0xc0; + else if (mmr_offset == 0x148 || mmr_offset == 0x200) + mmr_war_offset = 0x28; + else + mmr_war_offset = 0x158; + + readq_relaxed((void __iomem *)(mmr_base + mmr_war_offset)); + } +} + +static void inline +tioce_mmr_war_post(struct tioce_kernel *kern, void __iomem *mmr_addr) +{ + u64 mmr_base; + u64 mmr_offset; + + if (kern->ce_common->ce_rev != TIOCE_REV_A) + return; + + mmr_base = kern->ce_common->ce_pcibus.bs_base; + mmr_offset = (unsigned long)mmr_addr - mmr_base; + + if (mmr_offset < 0x45000) { + if (mmr_offset == 0x100) + readq_relaxed((void __iomem *)(mmr_base + 0x38)); + readq_relaxed((void __iomem *)(mmr_base + 0xb050)); + } +} + +/* load mmr contents into a variable */ +#define tioce_mmr_load(kern, mmrp, varp) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + *(varp) = readq_relaxed(mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* store variable contents into mmr */ +#define tioce_mmr_store(kern, mmrp, varp) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + writeq(*varp, mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* store immediate value into mmr */ +#define tioce_mmr_storei(kern, mmrp, val) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + writeq(val, mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* set bits (immediate value) into mmr */ +#define tioce_mmr_seti(kern, mmrp, bits) do {\ + u64 tmp; \ + tioce_mmr_load(kern, mmrp, &tmp); \ + tmp |= (bits); \ + tioce_mmr_store(kern, mmrp, &tmp); \ +} while (0) + +/* clear bits (immediate value) into mmr */ +#define tioce_mmr_clri(kern, mmrp, bits) do { \ + u64 tmp; \ + tioce_mmr_load(kern, mmrp, &tmp); \ + tmp &= ~(bits); \ + tioce_mmr_store(kern, mmrp, &tmp); \ +} while (0) + +/** + * Bus address ranges for the 5 flavors of TIOCE DMA + */ + +#define TIOCE_D64_MIN 0x8000000000000000UL +#define TIOCE_D64_MAX 0xffffffffffffffffUL +#define TIOCE_D64_ADDR(a) ((a) >= TIOCE_D64_MIN) + +#define TIOCE_D32_MIN 0x0000000080000000UL +#define TIOCE_D32_MAX 0x00000000ffffffffUL +#define TIOCE_D32_ADDR(a) ((a) >= TIOCE_D32_MIN && (a) <= TIOCE_D32_MAX) + +#define TIOCE_M32_MIN 0x0000000000000000UL +#define TIOCE_M32_MAX 0x000000007fffffffUL +#define TIOCE_M32_ADDR(a) ((a) >= TIOCE_M32_MIN && (a) <= TIOCE_M32_MAX) + +#define TIOCE_M40_MIN 0x0000004000000000UL +#define TIOCE_M40_MAX 0x0000007fffffffffUL +#define TIOCE_M40_ADDR(a) ((a) >= TIOCE_M40_MIN && (a) <= TIOCE_M40_MAX) + +#define TIOCE_M40S_MIN 0x0000008000000000UL +#define TIOCE_M40S_MAX 0x000000ffffffffffUL +#define TIOCE_M40S_ADDR(a) ((a) >= TIOCE_M40S_MIN && (a) <= TIOCE_M40S_MAX) + +/* + * ATE manipulation macros. + */ + +#define ATE_PAGESHIFT(ps) (__ffs(ps)) +#define ATE_PAGEMASK(ps) ((ps)-1) + +#define ATE_PAGE(x, ps) ((x) >> ATE_PAGESHIFT(ps)) +#define ATE_NPAGES(start, len, pagesize) \ + (ATE_PAGE((start)+(len)-1, pagesize) - ATE_PAGE(start, pagesize) + 1) + +#define ATE_VALID(ate) ((ate) & (1UL << 63)) +#define ATE_MAKE(addr, ps, msi) \ + (((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63) | ((msi)?(1UL << 62):0)) + +/* + * Flavors of ate-based mapping supported by tioce_alloc_map() + */ + +#define TIOCE_ATE_M32 1 +#define TIOCE_ATE_M40 2 +#define TIOCE_ATE_M40S 3 + +#define KB(x) ((u64)(x) << 10) +#define MB(x) ((u64)(x) << 20) +#define GB(x) ((u64)(x) << 30) + +/** + * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode + * @ct_addr: system coretalk address + * + * Map @ct_addr into 64-bit CE bus space. No device context is necessary + * and no CE mapping are consumed. + * + * Bits 53:0 come from the coretalk address. The remaining bits are set as + * follows: + * + * 63 - must be 1 to indicate d64 mode to CE hardware + * 62 - barrier bit ... controlled with tioce_dma_barrier() + * 61 - msi bit ... specified through dma_flags + * 60:54 - reserved, MBZ + */ +static u64 +tioce_dma_d64(unsigned long ct_addr, int dma_flags) +{ + u64 bus_addr; + + bus_addr = ct_addr | (1UL << 63); + if (dma_flags & SN_DMA_MSI) + bus_addr |= (1UL << 61); + + return bus_addr; +} + +/** + * pcidev_to_tioce - return misc ce related pointers given a pci_dev + * @pci_dev: pci device context + * @base: ptr to store struct tioce_mmr * for the CE holding this device + * @kernel: ptr to store struct tioce_kernel * for the CE holding this device + * @port: ptr to store the CE port number that this device is on + * + * Return pointers to various CE-related structures for the CE upstream of + * @pci_dev. + */ +static inline void +pcidev_to_tioce(struct pci_dev *pdev, struct tioce __iomem **base, + struct tioce_kernel **kernel, int *port) +{ + struct pcidev_info *pcidev_info; + struct tioce_common *ce_common; + struct tioce_kernel *ce_kernel; + + pcidev_info = SN_PCIDEV_INFO(pdev); + ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; + ce_kernel = (struct tioce_kernel *)ce_common->ce_kernel_private; + + if (base) + *base = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base; + if (kernel) + *kernel = ce_kernel; + + /* + * we use port as a zero-based value internally, even though the + * documentation is 1-based. + */ + if (port) + *port = + (pdev->bus->number < ce_kernel->ce_port1_secondary) ? 0 : 1; +} + +/** + * tioce_alloc_map - Given a coretalk address, map it to pcie bus address + * space using one of the various ATE-based address modes. + * @ce_kern: tioce context + * @type: map mode to use + * @port: 0-based port that the requesting device is downstream of + * @ct_addr: the coretalk address to map + * @len: number of bytes to map + * + * Given the addressing type, set up various parameters that define the + * ATE pool to use. Search for a contiguous block of entries to cover the + * length, and if enough resources exist, fill in the ATEs and construct a + * tioce_dmamap struct to track the mapping. + */ +static u64 +tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, + u64 ct_addr, int len, int dma_flags) +{ + int i; + int j; + int first; + int last; + int entries; + int nates; + u64 pagesize; + int msi_capable, msi_wanted; + u64 *ate_shadow; + u64 __iomem *ate_reg; + u64 addr; + struct tioce __iomem *ce_mmr; + u64 bus_base; + struct tioce_dmamap *map; + + ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base; + + switch (type) { + case TIOCE_ATE_M32: + /* + * The first 64 entries of the ate3240 pool are dedicated to + * super-page (TIOCE_ATE_M40S) mode. + */ + first = 64; + entries = TIOCE_NUM_M3240_ATES - 64; + ate_shadow = ce_kern->ce_ate3240_shadow; + ate_reg = ce_mmr->ce_ure_ate3240; + pagesize = ce_kern->ce_ate3240_pagesize; + bus_base = TIOCE_M32_MIN; + msi_capable = 1; + break; + case TIOCE_ATE_M40: + first = 0; + entries = TIOCE_NUM_M40_ATES; + ate_shadow = ce_kern->ce_ate40_shadow; + ate_reg = ce_mmr->ce_ure_ate40; + pagesize = MB(64); + bus_base = TIOCE_M40_MIN; + msi_capable = 0; + break; + case TIOCE_ATE_M40S: + /* + * ate3240 entries 0-31 are dedicated to port1 super-page + * mappings. ate3240 entries 32-63 are dedicated to port2. + */ + first = port * 32; + entries = 32; + ate_shadow = ce_kern->ce_ate3240_shadow; + ate_reg = ce_mmr->ce_ure_ate3240; + pagesize = GB(16); + bus_base = TIOCE_M40S_MIN; + msi_capable = 0; + break; + default: + return 0; + } + + msi_wanted = dma_flags & SN_DMA_MSI; + if (msi_wanted && !msi_capable) + return 0; + + nates = ATE_NPAGES(ct_addr, len, pagesize); + if (nates > entries) + return 0; + + last = first + entries - nates; + for (i = first; i <= last; i++) { + if (ATE_VALID(ate_shadow[i])) + continue; + + for (j = i; j < i + nates; j++) + if (ATE_VALID(ate_shadow[j])) + break; + + if (j >= i + nates) + break; + } + + if (i > last) + return 0; + + map = kzalloc(sizeof(struct tioce_dmamap), GFP_ATOMIC); + if (!map) + return 0; + + addr = ct_addr; + for (j = 0; j < nates; j++) { + u64 ate; + + ate = ATE_MAKE(addr, pagesize, msi_wanted); + ate_shadow[i + j] = ate; + tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate); + addr += pagesize; + } + + map->refcnt = 1; + map->nbytes = nates * pagesize; + map->ct_start = ct_addr & ~ATE_PAGEMASK(pagesize); + map->pci_start = bus_base + (i * pagesize); + map->ate_hw = &ate_reg[i]; + map->ate_shadow = &ate_shadow[i]; + map->ate_count = nates; + + list_add(&map->ce_dmamap_list, &ce_kern->ce_dmamap_list); + + return (map->pci_start + (ct_addr - map->ct_start)); +} + +/** + * tioce_dma_d32 - create a DMA mapping using 32-bit direct mode + * @pdev: linux pci_dev representing the function + * @paddr: system physical address + * + * Map @paddr into 32-bit bus space of the CE associated with @pcidev_info. + */ +static u64 +tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr, int dma_flags) +{ + int dma_ok; + int port; + struct tioce __iomem *ce_mmr; + struct tioce_kernel *ce_kern; + u64 ct_upper; + u64 ct_lower; + dma_addr_t bus_addr; + + if (dma_flags & SN_DMA_MSI) + return 0; + + ct_upper = ct_addr & ~0x3fffffffUL; + ct_lower = ct_addr & 0x3fffffffUL; + + pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port); + + if (ce_kern->ce_port[port].dirmap_refcnt == 0) { + u64 tmp; + + ce_kern->ce_port[port].dirmap_shadow = ct_upper; + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port], + ct_upper); + tmp = ce_mmr->ce_ure_dir_map[port]; + dma_ok = 1; + } else + dma_ok = (ce_kern->ce_port[port].dirmap_shadow == ct_upper); + + if (dma_ok) { + ce_kern->ce_port[port].dirmap_refcnt++; + bus_addr = TIOCE_D32_MIN + ct_lower; + } else + bus_addr = 0; + + return bus_addr; +} + +/** + * tioce_dma_barrier - swizzle a TIOCE bus address to include or exclude + * the barrier bit. + * @bus_addr: bus address to swizzle + * + * Given a TIOCE bus address, set the appropriate bit to indicate barrier + * attributes. + */ +static u64 +tioce_dma_barrier(u64 bus_addr, int on) +{ + u64 barrier_bit; + + /* barrier not supported in M40/M40S mode */ + if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr)) + return bus_addr; + + if (TIOCE_D64_ADDR(bus_addr)) + barrier_bit = (1UL << 62); + else /* must be m32 or d32 */ + barrier_bit = (1UL << 30); + + return (on) ? (bus_addr | barrier_bit) : (bus_addr & ~barrier_bit); +} + +/** + * tioce_dma_unmap - release CE mapping resources + * @pdev: linux pci_dev representing the function + * @bus_addr: bus address returned by an earlier tioce_dma_map + * @dir: mapping direction (unused) + * + * Locate mapping resources associated with @bus_addr and release them. + * For mappings created using the direct modes there are no resources + * to release. + */ +void +tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) +{ + int i; + int port; + struct tioce_kernel *ce_kern; + struct tioce __iomem *ce_mmr; + unsigned long flags; + + bus_addr = tioce_dma_barrier(bus_addr, 0); + pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port); + + /* nothing to do for D64 */ + + if (TIOCE_D64_ADDR(bus_addr)) + return; + + spin_lock_irqsave(&ce_kern->ce_lock, flags); + + if (TIOCE_D32_ADDR(bus_addr)) { + if (--ce_kern->ce_port[port].dirmap_refcnt == 0) { + ce_kern->ce_port[port].dirmap_shadow = 0; + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port], + 0); + } + } else { + struct tioce_dmamap *map; + + list_for_each_entry(map, &ce_kern->ce_dmamap_list, + ce_dmamap_list) { + u64 last; + + last = map->pci_start + map->nbytes - 1; + if (bus_addr >= map->pci_start && bus_addr <= last) + break; + } + + if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) { + printk(KERN_WARNING + "%s: %s - no map found for bus_addr 0x%llx\n", + __func__, pci_name(pdev), bus_addr); + } else if (--map->refcnt == 0) { + for (i = 0; i < map->ate_count; i++) { + map->ate_shadow[i] = 0; + tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0); + } + + list_del(&map->ce_dmamap_list); + kfree(map); + } + } + + spin_unlock_irqrestore(&ce_kern->ce_lock, flags); +} + +/** + * tioce_do_dma_map - map pages for PCI DMA + * @pdev: linux pci_dev representing the function + * @paddr: host physical address to map + * @byte_count: bytes to map + * + * This is the main wrapper for mapping host physical pages to CE PCI space. + * The mapping mode used is based on the device's dma_mask. + */ +static u64 +tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, + int barrier, int dma_flags) +{ + unsigned long flags; + u64 ct_addr; + u64 mapaddr = 0; + struct tioce_kernel *ce_kern; + struct tioce_dmamap *map; + int port; + u64 dma_mask; + + dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask; + + /* cards must be able to address at least 31 bits */ + if (dma_mask < 0x7fffffffUL) + return 0; + + if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS) + ct_addr = PHYS_TO_TIODMA(paddr); + else + ct_addr = paddr; + + /* + * If the device can generate 64 bit addresses, create a D64 map. + */ + if (dma_mask == ~0UL) { + mapaddr = tioce_dma_d64(ct_addr, dma_flags); + if (mapaddr) + goto dma_map_done; + } + + pcidev_to_tioce(pdev, NULL, &ce_kern, &port); + + spin_lock_irqsave(&ce_kern->ce_lock, flags); + + /* + * D64 didn't work ... See if we have an existing map that covers + * this address range. Must account for devices dma_mask here since + * an existing map might have been done in a mode using more pci + * address bits than this device can support. + */ + list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) { + u64 last; + + last = map->ct_start + map->nbytes - 1; + if (ct_addr >= map->ct_start && + ct_addr + byte_count - 1 <= last && + map->pci_start <= dma_mask) { + map->refcnt++; + mapaddr = map->pci_start + (ct_addr - map->ct_start); + break; + } + } + + /* + * If we don't have a map yet, and the card can generate 40 + * bit addresses, try the M40/M40S modes. Note these modes do not + * support a barrier bit, so if we need a consistent map these + * won't work. + */ + if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) { + /* + * We have two options for 40-bit mappings: 16GB "super" ATEs + * and 64MB "regular" ATEs. We'll try both if needed for a + * given mapping but which one we try first depends on the + * size. For requests >64MB, prefer to use a super page with + * regular as the fallback. Otherwise, try in the reverse order. + */ + + if (byte_count > MB(64)) { + mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40S, + port, ct_addr, byte_count, + dma_flags); + if (!mapaddr) + mapaddr = + tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1, + ct_addr, byte_count, + dma_flags); + } else { + mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1, + ct_addr, byte_count, + dma_flags); + if (!mapaddr) + mapaddr = + tioce_alloc_map(ce_kern, TIOCE_ATE_M40S, + port, ct_addr, byte_count, + dma_flags); + } + } + + /* + * 32-bit direct is the next mode to try + */ + if (!mapaddr && dma_mask >= 0xffffffffUL) + mapaddr = tioce_dma_d32(pdev, ct_addr, dma_flags); + + /* + * Last resort, try 32-bit ATE-based map. + */ + if (!mapaddr) + mapaddr = + tioce_alloc_map(ce_kern, TIOCE_ATE_M32, -1, ct_addr, + byte_count, dma_flags); + + spin_unlock_irqrestore(&ce_kern->ce_lock, flags); + +dma_map_done: + if (mapaddr && barrier) + mapaddr = tioce_dma_barrier(mapaddr, 1); + + return mapaddr; +} + +/** + * tioce_dma - standard pci dma map interface + * @pdev: pci device requesting the map + * @paddr: system physical address to map into pci space + * @byte_count: # bytes to map + * + * Simply call tioce_do_dma_map() to create a map with the barrier bit clear + * in the address. + */ +static u64 +tioce_dma(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags) +{ + return tioce_do_dma_map(pdev, paddr, byte_count, 0, dma_flags); +} + +/** + * tioce_dma_consistent - consistent pci dma map interface + * @pdev: pci device requesting the map + * @paddr: system physical address to map into pci space + * @byte_count: # bytes to map + * + * Simply call tioce_do_dma_map() to create a map with the barrier bit set + * in the address. + */ +static u64 +tioce_dma_consistent(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags) +{ + return tioce_do_dma_map(pdev, paddr, byte_count, 1, dma_flags); +} + +/** + * tioce_error_intr_handler - SGI TIO CE error interrupt handler + * @irq: unused + * @arg: pointer to tioce_common struct for the given CE + * + * Handle a CE error interrupt. Simply a wrapper around a SAL call which + * defers processing to the SGI prom. + */ +static irqreturn_t +tioce_error_intr_handler(int irq, void *arg) +{ + struct tioce_common *soft = arg; + struct ia64_sal_retval ret_stuff; + ret_stuff.status = 0; + ret_stuff.v0 = 0; + + SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_ERROR_INTERRUPT, + soft->ce_pcibus.bs_persist_segment, + soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0); + + if (ret_stuff.v0) + panic("tioce_error_intr_handler: Fatal TIOCE error"); + + return IRQ_HANDLED; +} + +/** + * tioce_reserve_m32 - reserve M32 ATEs for the indicated address range + * @tioce_kernel: TIOCE context to reserve ATEs for + * @base: starting bus address to reserve + * @limit: last bus address to reserve + * + * If base/limit falls within the range of bus space mapped through the + * M32 space, reserve the resources corresponding to the range. + */ +static void +tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit) +{ + int ate_index, last_ate, ps; + struct tioce __iomem *ce_mmr; + + ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base; + ps = ce_kern->ce_ate3240_pagesize; + ate_index = ATE_PAGE(base, ps); + last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1; + + if (ate_index < 64) + ate_index = 64; + + if (last_ate >= TIOCE_NUM_M3240_ATES) + last_ate = TIOCE_NUM_M3240_ATES - 1; + + while (ate_index <= last_ate) { + u64 ate; + + ate = ATE_MAKE(0xdeadbeef, ps, 0); + ce_kern->ce_ate3240_shadow[ate_index] = ate; + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index], + ate); + ate_index++; + } +} + +/** + * tioce_kern_init - init kernel structures related to a given TIOCE + * @tioce_common: ptr to a cached tioce_common struct that originated in prom + */ +static struct tioce_kernel * +tioce_kern_init(struct tioce_common *tioce_common) +{ + int i; + int ps; + int dev; + u32 tmp; + unsigned int seg, bus; + struct tioce __iomem *tioce_mmr; + struct tioce_kernel *tioce_kern; + + tioce_kern = kzalloc(sizeof(struct tioce_kernel), GFP_KERNEL); + if (!tioce_kern) { + return NULL; + } + + tioce_kern->ce_common = tioce_common; + spin_lock_init(&tioce_kern->ce_lock); + INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list); + tioce_common->ce_kernel_private = (u64) tioce_kern; + + /* + * Determine the secondary bus number of the port2 logical PPB. + * This is used to decide whether a given pci device resides on + * port1 or port2. Note: We don't have enough plumbing set up + * here to use pci_read_config_xxx() so use raw_pci_read(). + */ + + seg = tioce_common->ce_pcibus.bs_persist_segment; + bus = tioce_common->ce_pcibus.bs_persist_busnum; + + raw_pci_read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp); + tioce_kern->ce_port1_secondary = (u8) tmp; + + /* + * Set PMU pagesize to the largest size available, and zero out + * the ATEs. + */ + + tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base; + tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map, + CE_URE_PAGESIZE_MASK); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map, + CE_URE_256K_PAGESIZE); + ps = tioce_kern->ce_ate3240_pagesize = KB(256); + + for (i = 0; i < TIOCE_NUM_M40_ATES; i++) { + tioce_kern->ce_ate40_shadow[i] = 0; + tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0); + } + + for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) { + tioce_kern->ce_ate3240_shadow[i] = 0; + tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0); + } + + /* + * Reserve ATEs corresponding to reserved address ranges. These + * include: + * + * Memory space covered by each PPB mem base/limit register + * Memory space covered by each PPB prefetch base/limit register + * + * These bus ranges are for pio (downstream) traffic only, and so + * cannot be used for DMA. + */ + + for (dev = 1; dev <= 2; dev++) { + u64 base, limit; + + /* mem base/limit */ + + raw_pci_read(seg, bus, PCI_DEVFN(dev, 0), + PCI_MEMORY_BASE, 2, &tmp); + base = (u64)tmp << 16; + + raw_pci_read(seg, bus, PCI_DEVFN(dev, 0), + PCI_MEMORY_LIMIT, 2, &tmp); + limit = (u64)tmp << 16; + limit |= 0xfffffUL; + + if (base < limit) + tioce_reserve_m32(tioce_kern, base, limit); + + /* + * prefetch mem base/limit. The tioce ppb's have 64-bit + * decoders, so read the upper portions w/o checking the + * attributes. + */ + + raw_pci_read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_MEMORY_BASE, 2, &tmp); + base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16; + + raw_pci_read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_BASE_UPPER32, 4, &tmp); + base |= (u64)tmp << 32; + + raw_pci_read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_MEMORY_LIMIT, 2, &tmp); + + limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16; + limit |= 0xfffffUL; + + raw_pci_read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_LIMIT_UPPER32, 4, &tmp); + limit |= (u64)tmp << 32; + + if ((base < limit) && TIOCE_M32_ADDR(base)) + tioce_reserve_m32(tioce_kern, base, limit); + } + + return tioce_kern; +} + +/** + * tioce_force_interrupt - implement altix force_interrupt() backend for CE + * @sn_irq_info: sn asic irq that we need an interrupt generated for + * + * Given an sn_irq_info struct, set the proper bit in ce_adm_force_int to + * force a secondary interrupt to be generated. This is to work around an + * asic issue where there is a small window of opportunity for a legacy device + * interrupt to be lost. + */ +static void +tioce_force_interrupt(struct sn_irq_info *sn_irq_info) +{ + struct pcidev_info *pcidev_info; + struct tioce_common *ce_common; + struct tioce_kernel *ce_kern; + struct tioce __iomem *ce_mmr; + u64 force_int_val; + + if (!sn_irq_info->irq_bridge) + return; + + if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_TIOCE) + return; + + pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; + if (!pcidev_info) + return; + + ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; + ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base; + ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; + + /* + * TIOCE Rev A workaround (PV 945826), force an interrupt by writing + * the TIO_INTx register directly (1/26/2006) + */ + if (ce_common->ce_rev == TIOCE_REV_A) { + u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit); + u64 status; + + tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status); + if (status & int_bit_mask) { + u64 force_irq = (1 << 8) | sn_irq_info->irq_irq; + u64 ctalk = sn_irq_info->irq_xtalkaddr; + u64 nasid, offset; + + nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT; + offset = (ctalk & CTALK_NODE_OFFSET); + HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq); + } + + return; + } + + /* + * irq_int_bit is originally set up by prom, and holds the interrupt + * bit shift (not mask) as defined by the bit definitions in the + * ce_adm_int mmr. These shifts are not the same for the + * ce_adm_force_int register, so do an explicit mapping here to make + * things clearer. + */ + + switch (sn_irq_info->irq_int_bit) { + case CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT; + break; + case CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT; + break; + case CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT; + break; + case CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT; + break; + case CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT; + break; + case CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT; + break; + case CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT; + break; + case CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT; + break; + default: + return; + } + tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val); +} + +/** + * tioce_target_interrupt - implement set_irq_affinity for tioce resident + * functions. Note: only applies to line interrupts, not MSI's. + * + * @sn_irq_info: SN IRQ context + * + * Given an sn_irq_info, set the associated CE device's interrupt destination + * register. Since the interrupt destination registers are on a per-ce-slot + * basis, this will retarget line interrupts for all functions downstream of + * the slot. + */ +static void +tioce_target_interrupt(struct sn_irq_info *sn_irq_info) +{ + struct pcidev_info *pcidev_info; + struct tioce_common *ce_common; + struct tioce_kernel *ce_kern; + struct tioce __iomem *ce_mmr; + int bit; + u64 vector; + + pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; + if (!pcidev_info) + return; + + ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; + ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base; + ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; + + bit = sn_irq_info->irq_int_bit; + + tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit)); + vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT; + vector |= sn_irq_info->irq_xtalkaddr; + tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector); + tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit)); + + tioce_force_interrupt(sn_irq_info); +} + +/** + * tioce_bus_fixup - perform final PCI fixup for a TIO CE bus + * @prom_bussoft: Common prom/kernel struct representing the bus + * + * Replicates the tioce_common pointed to by @prom_bussoft in kernel + * space. Allocates and initializes a kernel-only area for a given CE, + * and sets up an irq for handling CE error interrupts. + * + * On successful setup, returns the kernel version of tioce_common back to + * the caller. + */ +static void * +tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) +{ + struct tioce_common *tioce_common; + struct tioce_kernel *tioce_kern; + struct tioce __iomem *tioce_mmr; + + /* + * Allocate kernel bus soft and copy from prom. + */ + + tioce_common = kzalloc(sizeof(struct tioce_common), GFP_KERNEL); + if (!tioce_common) + return NULL; + + memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common)); + tioce_common->ce_pcibus.bs_base = (unsigned long) + ioremap(REGION_OFFSET(tioce_common->ce_pcibus.bs_base), + sizeof(struct tioce_common)); + + tioce_kern = tioce_kern_init(tioce_common); + if (tioce_kern == NULL) { + kfree(tioce_common); + return NULL; + } + + /* + * Clear out any transient errors before registering the error + * interrupt handler. + */ + + tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base; + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias, + ~0ULL); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, 0ULL); + + if (request_irq(SGI_PCIASIC_ERROR, + tioce_error_intr_handler, + IRQF_SHARED, "TIOCE error", (void *)tioce_common)) + printk(KERN_WARNING + "%s: Unable to get irq %d. " + "Error interrupts won't be routed for " + "TIOCE bus %04x:%02x\n", + __func__, SGI_PCIASIC_ERROR, + tioce_common->ce_pcibus.bs_persist_segment, + tioce_common->ce_pcibus.bs_persist_busnum); + + irq_set_handler(SGI_PCIASIC_ERROR, handle_level_irq); + sn_set_err_irq_affinity(SGI_PCIASIC_ERROR); + return tioce_common; +} + +static struct sn_pcibus_provider tioce_pci_interfaces = { + .dma_map = tioce_dma, + .dma_map_consistent = tioce_dma_consistent, + .dma_unmap = tioce_dma_unmap, + .bus_fixup = tioce_bus_fixup, + .force_interrupt = tioce_force_interrupt, + .target_interrupt = tioce_target_interrupt +}; + +/** + * tioce_init_provider - init SN PCI provider ops for TIO CE + */ +int +tioce_init_provider(void) +{ + sn_pci_provider[PCIIO_ASIC_TYPE_TIOCE] = &tioce_pci_interfaces; + return 0; +}