-# Copyright 2015 Intel Corporation.
+# Copyright 2015-2016 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
import locale
import re
import subprocess
+import time
+import pexpect
from conf import settings as S
from conf import get_test_param
S.getValue('LOG_FILE_QEMU')) + str(self._number)
self._timeout = S.getValue('GUEST_TIMEOUT')[self._number]
self._monitor = '%s/vm%dmonitor' % ('/tmp', self._number)
- self._net1 = S.getValue('VANILLA_NIC1_NAME')[self._number]
- self._net2 = S.getValue('VANILLA_NIC2_NAME')[self._number]
+ self._net1 = get_test_param('guest_nic1_name', None)
+ if self._net1 == None:
+ self._net1 = S.getValue('GUEST_NIC1_NAME')[self._number]
+ else:
+ self._net1 = self._net1.split(',')[self._number]
+ self._net2 = get_test_param('guest_nic2_name', None)
+ if self._net2 == None:
+ self._net2 = S.getValue('GUEST_NIC2_NAME')[self._number]
+ else:
+ self._net2 = self._net2.split(',')[self._number]
+
+ # set guest loopback application based on VNF configuration
+ # cli option take precedence to config file values
+ self._guest_loopback = S.getValue('GUEST_LOOPBACK')[self._number]
+
+ self._testpmd_fwd_mode = S.getValue('GUEST_TESTPMD_FWD_MODE')
+ # in case of SRIOV we must ensure, that MAC addresses are not swapped
+ if S.getValue('SRIOV_ENABLED') and self._testpmd_fwd_mode.startswith('mac') and \
+ not S.getValue('VNF').endswith('PciPassthrough'):
+
+ self._logger.info("SRIOV detected, forwarding mode of testpmd was changed from '%s' to '%s'",
+ self._testpmd_fwd_mode, 'io')
+ self._testpmd_fwd_mode = 'io'
name = 'Client%d' % self._number
vnc = ':%d' % self._number
self._cmd = ['sudo', '-E', S.getValue('QEMU_BIN'),
'-m', S.getValue('GUEST_MEMORY')[self._number],
'-smp', str(S.getValue('GUEST_SMP')[self._number]),
- '-cpu', 'host',
- '-drive', 'if=ide,file=' +
+ '-cpu', 'host,migratable=off',
+ '-drive', 'if=scsi,file=' +
S.getValue('GUEST_IMAGE')[self._number],
'-boot', 'c', '--enable-kvm',
'-monitor', 'unix:%s,server,nowait' % self._monitor,
'-nographic', '-vnc', str(vnc), '-name', name,
'-snapshot', '-net none', '-no-reboot',
'-drive',
- 'if=ide,file=fat:rw:%s,snapshot=off' %
+ 'if=scsi,format=raw,file=fat:rw:%s,snapshot=off' %
S.getValue('GUEST_SHARE_DIR')[self._number],
]
self._configure_logging()
if self._timeout:
self._config_guest_loopback()
+ def stop(self):
+ """
+ Stops VNF instance gracefully first.
+ """
+ try:
+ # exit testpmd if needed
+ if self._guest_loopback == 'testpmd':
+ self.execute_and_wait('stop', 120, "Done")
+ self.execute_and_wait('quit', 120, "[bB]ye")
+
+ # turn off VM
+ self.execute_and_wait('poweroff', 120, "Power down")
+
+ except pexpect.TIMEOUT:
+ self.kill()
+
+ # wait until qemu shutdowns
+ self._logger.debug('Wait for QEMU to terminate')
+ for dummy in range(30):
+ time.sleep(1)
+ if not self.is_running():
+ break
+
+ # just for case that graceful shutdown failed
+ super(IVnfQemu, self).stop()
+
# helper functions
def _login(self, timeout=120):
self._logger.info('Affinitizing guest...')
- cur_locale = locale.getlocale()[1]
+ cur_locale = locale.getdefaultlocale()[1]
proc = subprocess.Popen(
('echo', 'info cpus'), stdout=subprocess.PIPE)
output = subprocess.check_output(
def _config_guest_loopback(self):
"""
- Configure VM to run VNF (e.g. port forwarding application)
+ Configure VM to run VNF, e.g. port forwarding application based on the configuration
"""
- # set guest loopback application based on VNF configuration
- # cli option take precedence to config file values
- guest_loopback = get_test_param('guest_loopback', S.getValue('GUEST_LOOPBACK')[self._number])
- if guest_loopback == 'testpmd':
+ if self._guest_loopback == 'testpmd':
self._login()
self._configure_testpmd()
- elif guest_loopback == 'l2fwd':
+ elif self._guest_loopback == 'l2fwd':
self._login()
self._configure_l2fwd()
- elif guest_loopback == 'linux_bridge':
+ elif self._guest_loopback == 'linux_bridge':
self._login()
self._configure_linux_bridge()
- elif guest_loopback != 'buildin':
+ elif self._guest_loopback != 'buildin':
self._logger.error('Unsupported guest loopback method "%s" was specified. Option'
- ' "buildin" will be used as a fallback.', guest_loopback)
+ ' "buildin" will be used as a fallback.', self._guest_loopback)
def wait(self, prompt=S.getValue('GUEST_PROMPT'), timeout=30):
super(IVnfQemu, self).wait(prompt=prompt, timeout=timeout)
def _modify_dpdk_makefile(self):
"""
- Modifies DPDK makefile in Guest before compilation
+ Modifies DPDK makefile in Guest before compilation if needed
"""
pass
Mount shared directory and copy DPDK and l2fwd sources
"""
# mount shared directory
- self.execute_and_wait('umount ' + S.getValue('OVS_DPDK_SHARE'))
+ self.execute_and_wait('umount /dev/sdb1')
self.execute_and_wait('rm -rf ' + S.getValue('GUEST_OVS_DPDK_DIR'))
self.execute_and_wait('mkdir -p ' + S.getValue('OVS_DPDK_SHARE'))
- self.execute_and_wait('mount -o iocharset=utf8 /dev/sdb1 ' +
+ self.execute_and_wait('mount -o ro,iocharset=utf8 /dev/sdb1 ' +
S.getValue('OVS_DPDK_SHARE'))
self.execute_and_wait('mkdir -p ' + S.getValue('GUEST_OVS_DPDK_DIR'))
- self.execute_and_wait('cp -ra ' + os.path.join(S.getValue('OVS_DPDK_SHARE'), dirname) +
+ self.execute_and_wait('cp -r ' + os.path.join(S.getValue('OVS_DPDK_SHARE'), dirname) +
' ' + S.getValue('GUEST_OVS_DPDK_DIR'))
+ self.execute_and_wait('umount /dev/sdb1')
def _configure_disable_firewall(self):
"""
Disable firewall in VM
"""
- # Disable services (F16)
- self.execute_and_wait('systemctl status iptables.service')
- self.execute_and_wait('systemctl stop iptables.service')
+ for iptables in ['iptables', 'ip6tables']:
+ # filter table
+ for chain in ['INPUT', 'FORWARD', 'OUTPUT']:
+ self.execute_and_wait("{} -t filter -P {} ACCEPT".format(iptables, chain))
+ # mangle table
+ for chain in ['PREROUTING', 'INPUT', 'FORWARD', 'OUTPUT', 'POSTROUTING']:
+ self.execute_and_wait("{} -t mangle -P {} ACCEPT".format(iptables, chain))
+ # nat table
+ for chain in ['PREROUTING', 'INPUT', 'OUTPUT', 'POSTROUTING']:
+ self.execute_and_wait("{} -t nat -P {} ACCEPT".format(iptables, chain))
+
+ # flush rules and delete chains created by user
+ for table in ['filter', 'mangle', 'nat']:
+ self.execute_and_wait("{} -t {} -F".format(iptables, table))
+ self.execute_and_wait("{} -t {} -X".format(iptables, table))
+
def _configure_testpmd(self):
"""
# modify makefile if needed
self._modify_dpdk_makefile()
+ # disable network interfaces, so DPDK can take care of them
+ self.execute_and_wait('ifdown ' + self._net1)
+ self.execute_and_wait('ifdown ' + self._net2)
+
+ # build and insert igb_uio and rebind interfaces to it
self.execute_and_wait('make RTE_OUTPUT=$RTE_SDK/$RTE_TARGET -C '
'$RTE_SDK/lib/librte_eal/linuxapp/igb_uio')
self.execute_and_wait('modprobe uio')
self.execute_and_wait('insmod %s/kmod/igb_uio.ko' %
S.getValue('RTE_TARGET'))
self.execute_and_wait('./tools/dpdk_nic_bind.py --status')
+ self.execute_and_wait(
+ './tools/dpdk_nic_bind.py -u' ' ' +
+ S.getValue('GUEST_NET1_PCI_ADDRESS')[self._number] + ' ' +
+ S.getValue('GUEST_NET2_PCI_ADDRESS')[self._number])
self.execute_and_wait(
'./tools/dpdk_nic_bind.py -b igb_uio' ' ' +
S.getValue('GUEST_NET1_PCI_ADDRESS')[self._number] + ' ' +
S.getValue('GUEST_NET2_PCI_ADDRESS')[self._number])
+ self.execute_and_wait('./tools/dpdk_nic_bind.py --status')
# build and run 'test-pmd'
self.execute_and_wait('cd ' + S.getValue('GUEST_OVS_DPDK_DIR') +
'/DPDK/app/test-pmd')
self.execute_and_wait('make clean')
self.execute_and_wait('make')
- self.execute_and_wait('./testpmd -c 0x3 -n 4 --socket-mem 512 --'
- ' --burst=64 -i --txqflags=0xf00 ' +
- '--disable-hw-vlan', 60, "Done")
- self.execute('set fwd mac_retry', 1)
+ if int(S.getValue('GUEST_NIC_QUEUES')):
+ self.execute_and_wait(
+ './testpmd {} -n4 --socket-mem 512 --'.format(
+ S.getValue('GUEST_TESTPMD_CPU_MASK')) +
+ ' --burst=64 -i --txqflags=0xf00 ' +
+ '--nb-cores={} --rxq={} --txq={} '.format(
+ S.getValue('GUEST_TESTPMD_NB_CORES'),
+ S.getValue('GUEST_TESTPMD_TXQ'),
+ S.getValue('GUEST_TESTPMD_RXQ')) +
+ '--disable-hw-vlan', 60, "Done")
+ else:
+ self.execute_and_wait(
+ './testpmd {} -n 4 --socket-mem 512 --'.format(
+ S.getValue('GUEST_TESTPMD_CPU_MASK')) +
+ ' --burst=64 -i --txqflags=0xf00 ' +
+ '--disable-hw-vlan', 60, "Done")
+ self.execute('set fwd ' + self._testpmd_fwd_mode, 1)
self.execute_and_wait('start', 20,
- 'TX RS bit threshold=0 - TXQ flags=0xf00')
+ 'TX RS bit threshold=.+ - TXQ flags=0xf00')
def _configure_l2fwd(self):
"""
Configure VM to perform L2 forwarding between NICs by linux bridge
"""
self._configure_disable_firewall()
- nic1_name = get_test_param('vanilla_nic1_name', self._net1)
- self.execute('ifconfig ' + nic1_name + ' ' +
- S.getValue('VANILLA_NIC1_IP_CIDR')[self._number])
- nic2_name = get_test_param('vanilla_nic2_name', self._net2)
- self.execute('ifconfig ' + nic2_name + ' ' +
- S.getValue('VANILLA_NIC2_IP_CIDR')[self._number])
+ self.execute('ip addr add ' +
+ S.getValue('VANILLA_NIC1_IP_CIDR')[self._number] +
+ ' dev ' + self._net1)
+ self.execute('ip link set dev ' + self._net1 + ' up')
+
+ self.execute('ip addr add ' +
+ S.getValue('VANILLA_NIC2_IP_CIDR')[self._number] +
+ ' dev ' + self._net2)
+ self.execute('ip link set dev ' + self._net2 + ' up')
# configure linux bridge
self.execute('brctl addbr br0')
self.execute('brctl addif br0 ' + self._net1 + ' ' + self._net2)
- self.execute('ifconfig br0 ' +
- S.getValue('VANILLA_BRIDGE_IP')[self._number])
+ self.execute('ip addr add ' +
+ S.getValue('VANILLA_BRIDGE_IP')[self._number] +
+ ' dev br0')
+ self.execute('ip link set dev br0 up')
# Add the arp entries for the IXIA ports and the bridge you are using.
# Use command line values if provided.
Code Review / vswitchperf.git / blobdiff