#!/bin/bash -ex
+##############################################################################
+# Copyright (c) 2016 NEC Corporation and others.
#
-# Copyright 2016 NEC Corporation.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
IMAGE_URL=https://launchpad.net/cirros/trunk/0.3.0/+download/cirros-0.3.0-x86_64-disk.img
IMAGE_NAME=cirros
INSPECTOR_PORT=12345
CONSUMER_PORT=12346
-# NOTE: You have to be changed these paramas depends on your machine,
-# installer and configs.
-COMPUTE_HOST='192.0.2.8'
-SSH_TO_COMPUTE_HOST="ssh heat-admin@$COMPUTE_HOST"
-
+SUPPORTED_INSTALLER_TYPES="apex local"
+INSTALLER_TYPE=${INSTALLER_TYPE:-apex}
+INSTALLER_IP=${INSTALLER_IP:-none}
+COMPUTE_HOST=${COMPUTE_HOST:-overcloud-novacompute-0}
+COMPUTE_IP=${COMPUTE_IP:-none}
+COMPUTE_USER=${COMPUTE_USER:-heat-admin}
+ssh_opts="-o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no"
+
+if [[ ! "$SUPPORTED_INSTALLER_TYPES" =~ "$INSTALLER_TYPE" ]] ; then
+ echo "ERROR: INSTALLER_TYPE=$INSTALLER_TYPE is not supported."
+ exit 1
+fi
+
+prepare_compute_ssh() {
+ ssh_opts_cpu="$ssh_opts"
+
+ if [[ "$INSTALLER_TYPE" == "apex" ]] ; then
+ if [[ "$INSTALLER_IP" == "none" ]] ; then
+ instack_mac=$(sudo virsh domiflist instack | awk '/default/{print $5}')
+ INSTALLER_IP=$(/usr/sbin/arp -e | grep ${instack_mac} | awk '{print $1}')
+ fi
+
+ if [[ "$COMPUTE_IP" == "none" ]] ; then
+ COMPUTE_IP=$(sudo ssh $ssh_opts $INSTALLER_IP \
+ "source stackrc; \
+ nova show $COMPUTE_HOST \
+ | awk '/ ctlplane network /{print \$5}'")
+ fi
+
+ # get ssh key from installer node
+ sudo scp $ssh_opts root@"$INSTALLER_IP":/home/stack/.ssh/id_rsa instack_key
+ sudo chown $(whoami):$(whoami) instack_key
+ chmod 400 instack_key
+ ssh_opts_cpu+=" -i instack_key"
+ elif [[ "$INSTALLER_TYPE" == "local" ]] ; then
+ if [[ "$COMPUTE_IP" == "none" ]] ; then
+ COMPUTE_IP=$(getent hosts "$COMPUTE_HOST" | awk '{ print $1 }')
+ if [[ -z "$COMPUTE_IP" ]]; then
+ echo "ERROR: Could not resolve $COMPUTE_HOST. Either manually set COMPUTE_IP or enable DNS resolution."
+ exit 1
+ fi
+ fi
+
+ echo "INSTALLER_TYPE set to 'local'. Assuming SSH keys already exchanged with $COMPUTE_HOST"
+ fi
+
+ # verify connectivity to target compute host
+ ping -c 1 "$COMPUTE_IP"
+}
download_image() {
[ -e "$IMAGE_FILE" ] && return 0
start_monitor() {
pgrep -f "python monitor.py" && return 0
- sudo python monitor.py "$COMPUTE_HOST" "http://127.0.0.1:$INSPECTOR_PORT/events" > monitor.log 2>&1 &
- MONITOR_PID=$!
+ sudo python monitor.py "$COMPUTE_HOST" "$COMPUTE_IP" \
+ "http://127.0.0.1:$INSPECTOR_PORT/events" > monitor.log 2>&1 &
}
stop_monitor() {
inject_failure() {
echo "disabling network of comupte host [$COMPUTE_HOST] for 3 mins..."
- $SSH_TO_COMPUTE_HOST "
-cat > disable_network.sh << 'END_TXT'
-#!/bin/bash
-dev=\$(/usr/sbin/ip route | awk '/^default/{print \$5}')
+ cat > disable_network.sh << 'END_TXT'
+#!/bin/bash -x
+dev=$(/usr/sbin/ip route | awk '/^default/{print $5}')
sleep 1
-echo sudo ip link set \$dev down
+echo sudo ip link set $dev down
sleep 180
-echo sudo ip link set \$dev up
+echo sudo ip link set $dev up
sleep 1
END_TXT
-chmod +x disable_network.sh
-nohup ./disable_network.sh > c 2>&1 &"
+ chmod +x disable_network.sh
+ scp $ssh_opts_cpu disable_network.sh "$COMPUTE_USER@$COMPUTE_IP:"
+ ssh $ssh_opts_cpu "$COMPUTE_USER@$COMPUTE_IP" 'nohup ./disable_network.sh > disable_network.log 2>&1 &'
}
calculate_notification_time() {
awk '{d = $1 - $2; if (d < 1 ) print d " OK"; else print d " NG"}'
}
-# TODO(r-mibu): Make sure env params are set properly for OpenStack clients
-# TODO(r-mibu): Make sure POD for doctor test is available in Pharos
+cleanup() {
+ set +e
+ echo "cleanup..."
+ stop_monitor
+ stop_inspector
+ stop_consumer
+
+ python ./nova_force_down.py "$COMPUTE_HOST" --unset
+ sleep 1
+ nova delete "$VM_NAME"
+ sleep 1
+ alarm_id=$(ceilometer alarm-list | grep " $ALARM_NAME " | awk '{print $2}')
+ sleep 1
+ [ -n "$alarm_id" ] && ceilometer alarm-delete "$alarm_id"
+ sleep 1
+ image_id=$(glance image-list | grep " $IMAGE_NAME " | awk '{print $2}')
+ sleep 1
+ [ -n "$image_id" ] && glance image-delete "$image_id"
+ #TODO: add host status check via nova admin api
+ echo "waiting disabled compute host back to be enabled..."
+ sleep 180
+ ssh $ssh_opts_cpu "$COMPUTE_USER@$COMPUTE_IP" \
+ "[ -e disable_network.log ] && cat disable_network.log"
+}
+
+
+echo "Note: doctor/tests/run.sh has been executed."
+
+prepare_compute_ssh
-echo "Note: doctor/tests/run.sh has been executed, "
-echo " but skipping this test due to lack of available test env/deployment."
-exit 0
+trap cleanup EXIT
+echo "preparing VM image..."
download_image
register_image
+echo "starting doctor sample components..."
start_monitor
start_inspector
start_consumer
+echo "creating VM and alarm..."
boot_vm
create_alarm
wait_for_vm_launch
sleep 60
+echo "injecting host failure..."
inject_failure
sleep 10