# under the License.
#
-from attrdict import AttrDict
import logging
+import os
+import sys
+
+from attrdict import AttrDict
from nfvbench.config import config_loads
-from nfvbench.connection import SSH
from nfvbench.credentials import Credentials
from nfvbench.fluentd import FluentLogHandler
import nfvbench.log
from nfvbench.network import Interface
from nfvbench.network import Network
+from nfvbench.specs import ChainType
from nfvbench.specs import Encaps
import nfvbench.traffic_gen.traffic_utils as traffic_utils
-import os
import pytest
__location__ = os.path.realpath(os.path.join(os.getcwd(),
os.path.dirname(__file__)))
-@pytest.fixture
-def ssh(monkeypatch):
- def mock_init(self, ssh_access, *args, **kwargs):
- self.ssh_access = ssh_access
- if ssh_access.private_key:
- self.pkey = self._get_pkey(ssh_access.private_key)
- else:
- self.pkey = None
- self._client = False
- self.connect_timeout = 2
- self.connect_retry_count = 1
- self.connect_retry_wait_sec = 1
- super(SSH, self).__init__()
-
- monkeypatch.setattr(SSH, '__init__', mock_init)
-
-
@pytest.fixture
def openstack_vxlan_spec():
return AttrDict(
{
'openstack': AttrDict({
'vswitch': "VTS",
- 'encaps': Encaps.VxLAN}
- ),
+ 'encaps': Encaps.VxLAN}),
'run_spec': AttrDict({
'use_vpp': True
})
}
)
+
# =========================================================================
# PVP Chain tests
# =========================================================================
assert iface.get_packet_count('wrong_key') == 0
+# pylint: disable=redefined-outer-name
@pytest.fixture(scope='session')
def iface1():
return Interface('iface1', 'trex', tx_packets=10000, rx_packets=1234)
assert [iface4, iface3, iface2, iface1] == net2.get_interfaces()
+# pylint: enable=redefined-outer-name
+
+# pylint: disable=pointless-string-statement
"""
def test_chain_analysis(net1, monkeypatch, openstack_vxlan_spec):
def mock_empty(self, *args, **kwargs):
assert result == expected_result
"""
-
# =========================================================================
# PVVP Chain tests
# =========================================================================
assert result == expected_result
"""
+
# =========================================================================
# Traffic client tests
# =========================================================================
assert should_raise_error('0pps')
assert should_raise_error('-1bps')
+
def test_rate_conversion():
assert traffic_utils.load_to_bps(50, 10000000000) == pytest.approx(5000000000.0)
assert traffic_utils.load_to_bps(37, 10000000000) == pytest.approx(3700000000.0)
assert results == expected_results
"""
+
+# pylint: enable=pointless-string-statement
+
# =========================================================================
# Other tests
# =========================================================================
def setup_module(module):
nfvbench.log.setup(mute_stdout=True)
+
def test_no_credentials():
cred = Credentials('/completely/wrong/path/openrc', None, False)
if cred.rc_auth_url:
else:
assert True
+
+# Because trex_stl_lib may not be installed when running unit test
+# nfvbench.traffic_client will try to import STLError:
+# from trex_stl_lib.api import STLError
+# will raise ImportError: No module named trex_stl_lib.api
+try:
+ import trex_stl_lib.api
+
+ assert trex_stl_lib.api
+except ImportError:
+ # Make up a trex_stl_lib.api.STLError class
+ class STLError(Exception):
+ pass
+
+
+ from types import ModuleType
+
+ stl_lib_mod = ModuleType('trex_stl_lib')
+ sys.modules['trex_stl_lib'] = stl_lib_mod
+ api_mod = ModuleType('trex_stl_lib.api')
+ stl_lib_mod.api = api_mod
+ sys.modules['trex_stl_lib.api'] = api_mod
+ api_mod.STLError = STLError
+
+# pylint: disable=wrong-import-position,ungrouped-imports
+from nfvbench.traffic_client import Device
+from nfvbench.traffic_client import IpBlock
+
+
+# pylint: enable=wrong-import-position,ungrouped-imports
+
+def test_ip_block():
+ ipb = IpBlock('10.0.0.0', '0.0.0.1', 256)
+ assert ipb.get_ip() == '10.0.0.0'
+ assert ipb.get_ip(255) == '10.0.0.255'
+ with pytest.raises(IndexError):
+ ipb.get_ip(256)
+ # verify with step larger than 1
+ ipb = IpBlock('10.0.0.0', '0.0.0.2', 256)
+ assert ipb.get_ip() == '10.0.0.0'
+ assert ipb.get_ip(1) == '10.0.0.2'
+ assert ipb.get_ip(128) == '10.0.1.0'
+ assert ipb.get_ip(255) == '10.0.1.254'
+ with pytest.raises(IndexError):
+ ipb.get_ip(256)
+
+
+def check_config(configs, cc, fc, src_ip, dst_ip, step_ip):
+ '''Verify that the range configs for each chain have adjacent IP ranges
+ of the right size and without holes between chains
+ '''
+ step = Device.ip_to_int(step_ip)
+ cfc = 0
+ sip = Device.ip_to_int(src_ip)
+ dip = Device.ip_to_int(dst_ip)
+ for index in range(cc):
+ config = configs[index]
+ assert config['ip_src_count'] == config['ip_dst_count']
+ assert Device.ip_to_int(config['ip_src_addr']) == sip
+ assert Device.ip_to_int(config['ip_dst_addr']) == dip
+ count = config['ip_src_count']
+ cfc += count
+ sip += count * step
+ dip += count * step
+ assert cfc == fc
+
+
+def create_device(fc, cc, ip, gip, tggip, step_ip):
+ return Device(0, 0, flow_count=fc, chain_count=cc, ip=ip, gateway_ip=gip, tg_gateway_ip=tggip,
+ ip_addrs_step=step_ip,
+ tg_gateway_ip_addrs_step=step_ip,
+ gateway_ip_addrs_step=step_ip)
+
+
+def check_device_flow_config(step_ip):
+ fc = 99999
+ cc = 10
+ ip0 = '10.0.0.0'
+ ip1 = '20.0.0.0'
+ tggip = '50.0.0.0'
+ gip = '60.0.0.0'
+ dev0 = create_device(fc, cc, ip0, gip, tggip, step_ip)
+ dev1 = create_device(fc, cc, ip1, gip, tggip, step_ip)
+ dev0.set_destination(dev1)
+ configs = dev0.get_stream_configs(ChainType.EXT)
+ check_config(configs, cc, fc, ip0, ip1, step_ip)
+
+
+def test_device_flow_config():
+ check_device_flow_config('0.0.0.1')
+ check_device_flow_config('0.0.0.2')
+
+
+def test_device_ip_range():
+ def ip_range_overlaps(ip0, ip1, flows):
+ tggip = '50.0.0.0'
+ gip = '60.0.0.0'
+ dev0 = create_device(flows, 10, ip0, gip, tggip, '0.0.0.1')
+ dev1 = create_device(flows, 10, ip1, gip, tggip, '0.0.0.1')
+ dev0.set_destination(dev1)
+ return dev0.ip_range_overlaps()
+
+ assert not ip_range_overlaps('10.0.0.0', '20.0.0.0', 10000)
+ assert ip_range_overlaps('10.0.0.0', '10.0.1.0', 10000)
+ assert ip_range_overlaps('10.0.0.0', '10.0.1.0', 257)
+ assert ip_range_overlaps('10.0.1.0', '10.0.0.0', 257)
+
+
def test_config():
refcfg = {1: 100, 2: {21: 100, 22: 200}, 3: None}
res1 = {1: 10, 2: {21: 100, 22: 200}, 3: None}
res2 = {1: 100, 2: {21: 1000, 22: 200}, 3: None}
res3 = {1: 100, 2: {21: 100, 22: 200}, 3: "abc"}
- assert(config_loads("{}", refcfg) == refcfg)
- assert(config_loads("{1: 10}", refcfg) == res1)
- assert(config_loads("{2: {21: 1000}}", refcfg) == res2)
- assert(config_loads('{3: "abc"}', refcfg) == res3)
+ assert config_loads("{}", refcfg) == refcfg
+ assert config_loads("{1: 10}", refcfg) == res1
+ assert config_loads("{2: {21: 1000}}", refcfg) == res2
+ assert config_loads('{3: "abc"}', refcfg) == res3
# correctly fails
# pairs of input string and expected subset (None if identical)
# whitelist keys
flavor = {'flavor': {'vcpus': 2, 'ram': 8192, 'disk': 0,
- 'extra_specs': {'hw:cpu_policy': 'dedicated'}}}
+ 'extra_specs': {'hw:cpu_policy': 'dedicated'}}}
new_flavor = {'flavor': {'vcpus': 2, 'ram': 8192, 'disk': 0,
- 'extra_specs': {'hw:cpu_policy': 'dedicated', 'hw:numa_nodes': 2}}}
- assert(config_loads("{'flavor': {'extra_specs': {'hw:numa_nodes': 2}}}", flavor,
- whitelist_keys=['alpha', 'extra_specs']) == new_flavor)
+ 'extra_specs': {'hw:cpu_policy': 'dedicated', 'hw:numa_nodes': 2}}}
+ assert config_loads("{'flavor': {'extra_specs': {'hw:numa_nodes': 2}}}", flavor,
+ whitelist_keys=['alpha', 'extra_specs']) == new_flavor
+
def test_fluentd():
logger = logging.getLogger('fluent-logger')
- handler = FluentLogHandler('nfvbench', fluentd_port=7081)
+
+ class FluentdConfig(dict):
+ def __getattr__(self, attr):
+ return self.get(attr)
+
+ fluentd_configs = [
+ FluentdConfig({
+ 'logging_tag': 'nfvbench',
+ 'result_tag': 'resultnfvbench',
+ 'ip': '127.0.0.1',
+ 'port': 7081
+ }),
+ FluentdConfig({
+ 'logging_tag': 'nfvbench',
+ 'result_tag': 'resultnfvbench',
+ 'ip': '127.0.0.1',
+ 'port': 24224
+ }),
+ FluentdConfig({
+ 'logging_tag': None,
+ 'result_tag': 'resultnfvbench',
+ 'ip': '127.0.0.1',
+ 'port': 7082
+ }),
+ FluentdConfig({
+ 'logging_tag': 'nfvbench',
+ 'result_tag': None,
+ 'ip': '127.0.0.1',
+ 'port': 7083
+ })
+ ]
+
+ handler = FluentLogHandler(fluentd_configs=fluentd_configs)
logger.addHandler(handler)
logger.setLevel(logging.INFO)
logger.info('test')
logger.warning('test %d', 100)
+
try:
raise Exception("test")
except Exception:
Code Review / nfvbench.git / blobdiff