# makefile to manage dpdk package
#
-# Copyright (C) 2015 OPNFV
+
+# Copyright 2015-2016 OPNFV
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved. This file is offered as-is,
-# without warranty of any kind.
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
#
# Contributors:
# Aihua Li, Huawei Technologies.
+# Martin Klozik, Intel Corporation.
include ../mk/master.mk
include ../package-list.mk
.PHONY: install force_make
+ifndef VHOST_USER
+ VHOST_USER = n
+endif
WORK_DIR = dpdk
TAG_DONE_FLAG = $(WORK_DIR)/.$(DPDK_TAG).tag.done
+DPDK_CUSE = ../../src_cuse/dpdk
-# the name has been changed from version to version
-ifeq ($(DPDK_TAG),v1.6.0r0)
+# VHOST configuration options are stored in different files based on DPDK version
+# v1.2.3r0-v1.6.0r2 - configuration inside config/defconfig_x86_64-default-linuxapp-gcc
+# v1.7.0-rc1-v2.2.0 - configuration inside config/common_linuxapp
+# v16 and newer - configuration split between config/common_linuxapp and config/common_base
+DPDK_TAG_MAJOR = $(shell echo $(DPDK_TAG) | cut -d. -f1)
+DPDK_TAG_MINOR = $(shell echo $(DPDK_TAG) | cut -d. -f2)
+ifeq ($(DPDK_TAG_MAJOR),v1)
+ifeq ($(DPDK_TAG_MINOR), $(filter $(DPDK_TAG_MINOR), 7 8))
+ DPDK_TARGET = x86_64-native-linuxapp-gcc
+ CONFIG_FILE_LINUXAPP = $(WORK_DIR)/config/common_linuxapp
+else
DPDK_TARGET = x86_64-default-linuxapp-gcc
- CONFIG_FILE = $(WORK_DIR)/config/defconfig_x86_64-default-linuxapp-gcc
+ CONFIG_FILE_LINUXAPP = $(WORK_DIR)/config/defconfig_x86_64-default-linuxapp-gcc
+endif
else
+ifeq ($(DPDK_TAG_MAJOR),v2)
DPDK_TARGET = x86_64-native-linuxapp-gcc
- CONFIG_FILE = $(WORK_DIR)/config/common_linuxapp
+ CONFIG_FILE_LINUXAPP = $(WORK_DIR)/config/common_linuxapp
+else
+ DPDK_TARGET = x86_64-native-linuxapp-gcc
+ CONFIG_FILE_BASE = $(WORK_DIR)/config/common_base
+ CONFIG_FILE_LINUXAPP = $(WORK_DIR)/config/common_linuxapp
+endif
endif
all: force_make
INSTALL_TARGET = force_make
+# modify CONFIG_FILE to enable VHOST_USER build and restore original CONFIG_FILE after the build
+# DPDK v16 comments:
+## CONFIG_RTE_BUILD_COMBINE_LIBS has been obsoleted
+## CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_LIBRTE_KNI are listed in both config_base and config_linuxapp,
+## values from config_linuxapp will be used, but options are modified at both places to avoid confusion.
force_make: $(TAG_DONE_FLAG)
- $(AT)cd $(WORK_DIR); make config T=$(DPDK_TARGET) && make
+ $(AT)cd $(WORK_DIR) && git pull $(DPDK_URL) $(DPDK_TAG)
+ifdef CONFIG_FILE_BASE
+ $(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST_USER=.\+/CONFIG_RTE_LIBRTE_VHOST_USER=$(VHOST_USER)/g' $(CONFIG_FILE_BASE)
+ $(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST=./CONFIG_RTE_LIBRTE_VHOST=y/g' $(CONFIG_FILE_BASE)
+ $(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_KNI=./CONFIG_RTE_LIBRTE_KNI=n/g' $(CONFIG_FILE_BASE)
+else
+ $(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST_USER=.\+/CONFIG_RTE_LIBRTE_VHOST_USER=$(VHOST_USER)/g' $(CONFIG_FILE_LINUXAPP)
+ $(AT)sed -i -e 's/CONFIG_RTE_BUILD_COMBINE_LIBS=./CONFIG_RTE_BUILD_COMBINE_LIBS=y/g' $(CONFIG_FILE_LINUXAPP)
+endif
+ $(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST=./CONFIG_RTE_LIBRTE_VHOST=y/g' $(CONFIG_FILE_LINUXAPP)
+ $(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_KNI=./CONFIG_RTE_LIBRTE_KNI=n/g' $(CONFIG_FILE_LINUXAPP)
+ $(AT)cd $(WORK_DIR); make install T=$(DPDK_TARGET) -j DESTDIR=$(WORK_DIR)
+ $(AT)cd `dirname $(CONFIG_FILE_LINUXAPP)` && git checkout `basename $(CONFIG_FILE_LINUXAPP)` && cd -
+ifdef CONFIG_FILE_BASE
+ $(AT)cd `dirname $(CONFIG_FILE_BASE)` && git checkout `basename $(CONFIG_FILE_BASE)` && cd -
+endif
+ $(AT)echo "VHOST_USER = $(VHOST_USER)"
+ifeq ($(VHOST_USER),n)
+ $(AT)cd $(WORK_DIR)/lib/librte_vhost/eventfd_link; make
+endif
@echo "Make done"
install: $(INSTALL_TARGET)
# hard way to clean and clobber
clean:
+ $(AT)cd $(WORK_DIR) && git clean -xfd *.o
clobber:
$(AT)rm -rf $(WORK_DIR)
+ $(AT)rm -rf $(DPDK_CUSE)
-# cleanse is for developer who would like to keep the
+# distclean is for developer who would like to keep the
# clone git repo, saving time to fetch again from url
-cleanse:
+distclean:
$(AT)cd $(WORK_DIR) && git clean -xfd && git checkout -f
+test:
+ @echo "Make test in $(WORK_DIR) (stub) "
+
+sanity:
+ @echo "Make sanity in $(WORK_DIR) (stub) "
+
$(WORK_DIR):
$(AT)git clone $(DPDK_URL)
+ $(AT)mkdir -p $(DPDK_CUSE)
+ $(AT)cp -rf ./* $(DPDK_CUSE)
$(TAG_DONE_FLAG): $(WORK_DIR)
$(AT)cd $(WORK_DIR); git checkout $(DPDK_TAG)
- $(AT)sed -i 's/CONFIG_RTE_BUILD_COMBINE_LIBS=n/CONFIG_RTE_BUILD_COMBINE_LIBS=y/g' $(CONFIG_FILE)
- # KNI was causing the 1.6.0 build to fail
- $(AT)sed -i 's/CONFIG_RTE_LIBRTE_KNI=y /CONFIG_RTE_LIBRTE_KNI=n/g' $(CONFIG_FILE)
$(AT)touch $@