# makefile to manage dpdk package
#
-# Copyright 2015-2016 OPNFV
+# Copyright 2015-2019 Intel Corporation and OPNFV. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
-# http://www.apache.org/licenses/LICENSE-2.0
+# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
#
# Contributors:
# Aihua Li, Huawei Technologies.
# Martin Klozik, Intel Corporation.
+# Christian Trautman, Red Hat Inc.
+# Maryam Tahhan, Intel Corporation.
+# Jabir Kanhira Kadavathu, Intel Corporation.
include ../mk/master.mk
include ../package-list.mk
+include /etc/os-release
.PHONY: install force_make
WORK_DIR = dpdk
TAG_DONE_FLAG = $(WORK_DIR)/.$(DPDK_TAG).tag.done
-DPDK_TARGET = x86_64-native-linuxapp-gcc
-CONFIG_FILE_LINUXAPP = $(WORK_DIR)/config/common_base
+# VHOST configuration options are stored in different files based on DPDK version
+# v1.2.3r0-v1.6.0r2 - configuration inside config/defconfig_x86_64-default-linuxapp-gcc
+# v1.7.0-rc1-v2.2.0 - configuration inside config/common_linux
+# v16 and newer - configuration split between config/common_linux and config/common_base
+DPDK_TAG_MAJOR = $(shell echo $(DPDK_TAG) | cut -d. -f1)
+DPDK_TAG_MINOR = $(shell echo $(DPDK_TAG) | cut -d. -f2)
+ifeq ($(DPDK_TAG_MAJOR),v1)
+ifeq ($(DPDK_TAG_MINOR), $(filter $(DPDK_TAG_MINOR), 7 8))
+ DPDK_TARGET = x86_64-native-linuxapp-gcc
+ CONFIG_FILE_LINUXAPP = $(WORK_DIR)/config/common_linux
+else
+ DPDK_TARGET = x86_64-default-linuxapp-gcc
+ CONFIG_FILE_LINUXAPP = $(WORK_DIR)/config/defconfig_x86_64-default-linuxapp-gcc
+endif
+else
+ifeq ($(DPDK_TAG_MAJOR),v2)
+ DPDK_TARGET = x86_64-native-linuxapp-gcc
+ CONFIG_FILE_LINUXAPP = $(WORK_DIR)/config/common_linux
+else
+ DPDK_TARGET = x86_64-native-linuxapp-gcc
+ CONFIG_FILE_BASE = $(WORK_DIR)/config/common_base
+ CONFIG_FILE_LINUXAPP = $(WORK_DIR)/config/common_linux
+endif
+endif
all: force_make install
@echo "Finished making $(WORK_DIR) "
# modify CONFIG_FILE to enable SHARED_LIB build and restore original CONFIG_FILE after the build
# DPDK v16 comments:
## CONFIG_RTE_BUILD_COMBINE_LIBS has been obsoleted
-## CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_LIBRTE_KNI are listed in both config_base and config_linuxapp,
+## CONFIG_RTE_LIBRTE_KNI is listed in both config_base and config_linuxapp,
## values from config_linuxapp will be used, but options are modified at both places to avoid confusion.
force_make: $(TAG_DONE_FLAG)
$(AT)cd $(WORK_DIR) && git pull $(DPDK_URL) $(DPDK_TAG)
+ifdef CONFIG_FILE_BASE
+ $(AT)sed -i -e 's/CONFIG_RTE_BUILD_SHARED_LIB=./CONFIG_RTE_BUILD_SHARED_LIB=y/g' $(CONFIG_FILE_BASE)
+ $(AT)sed -i -e 's/CONFIG_RTE_EAL_PMD_PATH=.*/CONFIG_RTE_EAL_PMD_PATH=\"\/usr\/lib\/dpdk-pmd\/\"/g' $(CONFIG_FILE_BASE)
+ $(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_KNI=./CONFIG_RTE_LIBRTE_KNI=n/g' $(CONFIG_FILE_BASE)
+else
$(AT)sed -i -e 's/CONFIG_RTE_BUILD_SHARED_LIB=./CONFIG_RTE_BUILD_SHARED_LIB=y/g' $(CONFIG_FILE_LINUXAPP)
$(AT)sed -i -e 's/CONFIG_RTE_EAL_PMD_PATH=.*/CONFIG_RTE_EAL_PMD_PATH=\"\/usr\/lib\/dpdk-pmd\/\"/g' $(CONFIG_FILE_LINUXAPP)
+ $(AT)sed -i -e 's/CONFIG_RTE_BUILD_COMBINE_LIBS=./CONFIG_RTE_BUILD_COMBINE_LIBS=y/g' $(CONFIG_FILE_LINUXAPP)
+endif
+# do not build kernel module under docker
+ifdef DOCKER
+ $(AT)sed -i -e 's/CONFIG_RTE_EAL_IGB_UIO=y/CONFIG_RTE_EAL_IGB_UIO=n/' $(CONFIG_FILE_LINUXAPP)
+ $(AT)sed -i -e 's/CONFIG_RTE_KNI_KMOD=y/CONFIG_RTE_KNI_KMOD=n/' $(CONFIG_FILE_LINUXAPP)
+endif
+# CentOS 7.3 specific config changes to compile
+ifeq ($(ID),"centos")
+ifeq ($(VERSION_ID),"7")
+ $(AT)sed -i.bak s@'SRCS-y += ethtool/igb/igb_main.c'@'#SRCS-y += ethtool/igb/igb_main.c'@g $(WORK_DIR)/kernel/linux/kni/Makefile
+endif
+endif
+# RHEL 7.3 specific config changes to compile
+ifeq ($(ID),"rhel")
+ifeq ($(VERSION_ID),"7.3")
+ $(AT)sed -i.bak s@'SRCS-y += ethtool/igb/igb_main.c'@'#SRCS-y += ethtool/igb/igb_main.c'@g $(WORK_DIR)/kernel/linux/kni/Makefile
+endif
+endif
$(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_KNI=./CONFIG_RTE_LIBRTE_KNI=n/g' $(CONFIG_FILE_LINUXAPP)
- $(AT)cd $(WORK_DIR); make config T=$(DPDK_TARGET) -j; make -j
+ $(AT)cd $(WORK_DIR); make config T=$(DPDK_TARGET) -j; make -j DESTDIR=$(WORK_DIR)
$(AT)cd `dirname $(CONFIG_FILE_LINUXAPP)` && git checkout `basename $(CONFIG_FILE_LINUXAPP)` && cd -
@echo "Make done"
$(AT)cd $(WORK_DIR); sudo make -j install prefix=/usr; cd -
$(AT)sudo mkdir -p /usr/lib/dpdk-pmd
$(AT)find /usr/lib -type f -name 'librte_pmd*' | while read path; do sudo ln -fs $$path /usr/lib/dpdk-pmd/$$(echo $$path | grep -o 'librte_.*so'); done
+# under docker there won't be kernel module available
+ifndef DOCKER
$(AT)sudo cp -a $(WORK_DIR)/build/kmod $(INSTALL_DIR)/lib/modules/$(KERNEL_VERSION)
+endif
@echo "install done"
# hard way to clean and clobber