Merge "Create experimental job for qtip integration"

[releng.git] / prototypes / xci / template / compute.interface.j2

diff --git a/prototypes/xci/template/compute.interface.j2 b/prototypes/xci/template/compute.interface.j2
index 1719f6a..094544c 100644 (file)
--- a/prototypes/xci/template/compute.interface.j2
+++ b/prototypes/xci/template/compute.interface.j2
@@ -1,29 +1,25 @@
-# This file describes the network interfaces available on your system
-# and how to activate them. For more information, see interfaces(5).
-
 # The loopback network interface
 auto lo
 iface lo inet loopback
 
-
 # Physical interface
-auto ens3
-iface ens3 inet manual
+auto {{ interface }}
+iface {{ interface }} inet manual
 
 # Container/Host management VLAN interface
-auto ens3.10
-iface ens3.10 inet manual
-    vlan-raw-device ens3
+auto {{ interface }}.10
+iface {{ interface }}.10 inet manual
+    vlan-raw-device {{ interface }}
 
 # OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
-auto ens3.30
-iface ens3.30 inet manual
-    vlan-raw-device ens3
+auto {{ interface }}.30
+iface {{ interface }}.30 inet manual
+    vlan-raw-device {{ interface }}
 
-# Storage network VLAN interface (optional)
-auto ens3.20
-iface ens3.20 inet manual
-    vlan-raw-device ens3
+# Storage network VLAN interface
+auto {{ interface }}.20
+iface {{ interface }}.20 inet manual
+    vlan-raw-device {{ interface }}
 
 # Container/Host management bridge
 auto br-mgmt
@@ -31,7 +27,7 @@ iface br-mgmt inet static
     bridge_stp off
     bridge_waitport 0
     bridge_fd 0
-    bridge_ports ens3.10
+    bridge_ports {{ interface }}.10
     address {{host_info[inventory_hostname].MGMT_IP}}
     netmask 255.255.252.0
 
@@ -41,7 +37,7 @@ iface br-vxlan inet static
     bridge_stp off
     bridge_waitport 0
     bridge_fd 0
-    bridge_ports ens3.30
+    bridge_ports {{ interface }}.30
     address {{host_info[inventory_hostname].VXLAN_IP}}
     netmask 255.255.252.0
 
@@ -51,10 +47,11 @@ iface br-vlan inet static
     bridge_stp off
     bridge_waitport 0
     bridge_fd 0
-    bridge_ports ens3
+    bridge_ports {{ interface }}
     address {{host_info[inventory_hostname].VLAN_IP}}
     netmask 255.255.255.0
     gateway 192.168.122.1
+    dns-nameserver 8.8.8.8 8.8.4.4
     offload-sg off
     # Create veth pair, don't bomb if already exists
     pre-up ip link add br-vlan-veth type veth peer name eth12 || true
@@ -65,22 +62,12 @@ iface br-vlan inet static
     post-down ip link del br-vlan-veth || true
     bridge_ports br-vlan-veth
 
-# Add an additional address to br-vlan
-iface br-vlan inet static
-    # Flat network default gateway
-    # -- This needs to exist somewhere for network reachability
-    # -- from the router namespace for floating IP paths.
-    # -- Putting this here is primarily for tempest to work.
-    address {{host_info[inventory_hostname].VLAN_IP_SECOND}}
-    netmask 255.255.252.0
-    dns-nameserver 8.8.8.8 8.8.4.4
-
-# compute1 Storage bridge
+# OpenStack Storage bridge
 auto br-storage
 iface br-storage inet static
     bridge_stp off
     bridge_waitport 0
     bridge_fd 0
-    bridge_ports ens3.20
+    bridge_ports {{ interface }}.20
     address {{host_info[inventory_hostname].STORAGE_IP}}
     netmask 255.255.252.0