xci: Remove prototypes directory due to migration to releng-xci repo

[releng.git] / prototypes / openstack-ansible / template / bifrost / compute.interface.j2

diff --git a/prototypes/openstack-ansible/template/bifrost/compute.interface.j2 b/prototypes/openstack-ansible/template/bifrost/compute.interface.j2
deleted file mode 100644 (file)
index 1719f6a..0000000
--- a/prototypes/openstack-ansible/template/bifrost/compute.interface.j2
+++ /dev/null
@@ -1,86 +0,0 @@
-# This file describes the network interfaces available on your system
-# and how to activate them. For more information, see interfaces(5).
-
-# The loopback network interface
-auto lo
-iface lo inet loopback
-
-
-# Physical interface
-auto ens3
-iface ens3 inet manual
-
-# Container/Host management VLAN interface
-auto ens3.10
-iface ens3.10 inet manual
-    vlan-raw-device ens3
-
-# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
-auto ens3.30
-iface ens3.30 inet manual
-    vlan-raw-device ens3
-
-# Storage network VLAN interface (optional)
-auto ens3.20
-iface ens3.20 inet manual
-    vlan-raw-device ens3
-
-# Container/Host management bridge
-auto br-mgmt
-iface br-mgmt inet static
-    bridge_stp off
-    bridge_waitport 0
-    bridge_fd 0
-    bridge_ports ens3.10
-    address {{host_info[inventory_hostname].MGMT_IP}}
-    netmask 255.255.252.0
-
-# compute1 VXLAN (tunnel/overlay) bridge config
-auto br-vxlan
-iface br-vxlan inet static
-    bridge_stp off
-    bridge_waitport 0
-    bridge_fd 0
-    bridge_ports ens3.30
-    address {{host_info[inventory_hostname].VXLAN_IP}}
-    netmask 255.255.252.0
-
-# OpenStack Networking VLAN bridge
-auto br-vlan
-iface br-vlan inet static
-    bridge_stp off
-    bridge_waitport 0
-    bridge_fd 0
-    bridge_ports ens3
-    address {{host_info[inventory_hostname].VLAN_IP}}
-    netmask 255.255.255.0
-    gateway 192.168.122.1
-    offload-sg off
-    # Create veth pair, don't bomb if already exists
-    pre-up ip link add br-vlan-veth type veth peer name eth12 || true
-    # Set both ends UP
-    pre-up ip link set br-vlan-veth up
-    pre-up ip link set eth12 up
-    # Delete veth pair on DOWN
-    post-down ip link del br-vlan-veth || true
-    bridge_ports br-vlan-veth
-
-# Add an additional address to br-vlan
-iface br-vlan inet static
-    # Flat network default gateway
-    # -- This needs to exist somewhere for network reachability
-    # -- from the router namespace for floating IP paths.
-    # -- Putting this here is primarily for tempest to work.
-    address {{host_info[inventory_hostname].VLAN_IP_SECOND}}
-    netmask 255.255.252.0
-    dns-nameserver 8.8.8.8 8.8.4.4
-
-# compute1 Storage bridge
-auto br-storage
-iface br-storage inet static
-    bridge_stp off
-    bridge_waitport 0
-    bridge_fd 0
-    bridge_ports ens3.20
-    address {{host_info[inventory_hostname].STORAGE_IP}}
-    netmask 255.255.252.0