Merge "Add os-collect-config data as an output"

[apex-tripleo-heat-templates.git] / network / config / bond-with-vlans / controller-v6.yaml

diff --git a/network/config/bond-with-vlans/controller-v6.yaml b/network/config/bond-with-vlans/controller-v6.yaml
index d07a26f..33c6fa6 100644 (file)
--- a/network/config/bond-with-vlans/controller-v6.yaml
+++ b/network/config/bond-with-vlans/controller-v6.yaml
@@ -1,4 +1,4 @@
-heat_template_version: '2016-10-14'
+heat_template_version: pike
 description: >
   Software Config to drive os-net-config with 2 bonded nics on a bridge with VLANs attached for the controller role with IPv6
   on the External network. The IPv6 default route is on the External network, and the IPv4 default route is on the Control
@@ -34,16 +34,14 @@ parameters:
     type: string
   BondInterfaceOvsOptions:
     default: bond_mode=active-backup
-    description: The ovs_options string for the bond interface. Set things like lacp=active and/or bond_mode=balance-slb using
-      this option.
+    description: 'The ovs_options or bonding_options string for the bond
+      interface. Set things like lacp=active and/or bond_mode=balance-slb
+      for OVS bonds or like mode=4 for Linux bonds using this option.'
     type: string
     constraints:
     - allowed_pattern: ^((?!balance.tcp).)*$
       description: 'The balance-tcp bond mode is known to cause packet loss and
-
-        should not be used in BondInterfaceOvsOptions.
-
-        '
+        should not be used in BondInterfaceOvsOptions.'
   ExternalNetworkVlanID:
     default: 10
     description: Vlan ID for the external network traffic.