##Post configuration after install
##params: none
function configure_post_install {
- local opnfv_attach_networks ovs_ip ip_range net_cidr tmp_ip af public_network_ipv6
- public_network_ipv6=False
- opnfv_attach_networks="admin_network public_network"
+ local opnfv_attach_networks ovs_ip ip_range net_cidr tmp_ip af external_network_ipv6
+ external_network_ipv6=False
+ opnfv_attach_networks="admin"
+ if [[ $enabled_network_list =~ "external" ]]; then
+ opnfv_attach_networks+=' external'
+ fi
echo -e "${blue}INFO: Post Install Configuration Running...${reset}"
else
echo -e "${blue}INFO: OVS Bridge ${NET_MAP[$network]} missing IP, will configure${reset}"
# use last IP of allocation pool
- eval "ip_range=\${${network}_usable_ip_range}"
+ eval "ip_range=\${${network}_overcloud_ip_range}"
ovs_ip=${ip_range##*,}
eval "net_cidr=\${${network}_cidr}"
if [[ $ovs_ip =~ ^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
af=4
else
af=6
- if [ "$network" == "public_network" ]; then
- public_network_ipv6=True
+ if [ "$network" == "external" ]; then
+ ublic_network_ipv6=True
fi
#enable ipv6 on bridge interface
echo 0 > /proc/sys/net/ipv6/conf/${NET_MAP[$network]}/disable_ipv6
source overcloudrc
set -o errexit
echo "Configuring Neutron external network"
-if [[ -n "$public_network_vlan" && "$public_network_vlan" != 'native' ]]; then
- neutron net-create external --router:external=True --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }') --provider:network_type vlan --provider:segmentation_id ${public_network_vlan} --provider:physical_network datacentre
+if [[ -n "$external_nic_mapping_compute_vlan" && "$external_nic_mapping_compute_vlan" != 'native' ]]; then
+ neutron net-create external --router:external=True --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }') --provider:network_type vlan --provider:segmentation_id ${external_nic_mapping_compute_vlan} --provider:physical_network datacentre
else
- neutron net-create external --router:external=True --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }')
+ neutron net-create external --router:external=True --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }') --provider:network_type flat --provider:physical_network datacentre
fi
-if [ "$public_network_ipv6" == "True" ]; then
- neutron subnet-create --name external-net --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }') external --ip_version 6 --ipv6_ra_mode slaac --ipv6_address_mode slaac --gateway ${public_network_gateway} --allocation-pool start=${public_network_floating_ip_range%%,*},end=${public_network_floating_ip_range##*,} ${public_network_cidr}
+if [ "$external_network_ipv6" == "True" ]; then
+ neutron subnet-create --name external-net --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }') external --ip_version 6 --ipv6_ra_mode slaac --ipv6_address_mode slaac --gateway ${external_gateway} --allocation-pool start=${external_floating_ip_range%%,*},end=${external_floating_ip_range##*,} ${external_cidr}
+elif [[ "$enabled_network_list" =~ "external" ]]; then
+ neutron subnet-create --name external-net --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }') --disable-dhcp external --gateway ${external_gateway} --allocation-pool start=${external_floating_ip_range%%,*},end=${external_floating_ip_range##*,} ${external_cidr}
else
- neutron subnet-create --name external-net --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }') --disable-dhcp external --gateway ${public_network_gateway} --allocation-pool start=${public_network_floating_ip_range%%,*},end=${public_network_floating_ip_range##*,} ${public_network_cidr}
+ # we re-use the introspection range for floating ips with single admin network
+ neutron subnet-create --name external-net --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }') --disable-dhcp external --gateway ${admin_gateway} --allocation-pool start=${admin_introspection_range%%,*},end=${admin_introspection_range##*,} ${admin_cidr}
fi
echo "Removing sahara endpoint and service"
sahara_service_id=\$(openstack service list | grep sahara | cut -d ' ' -f 2)
sahara_endpoint_id=\$(openstack endpoint list | grep sahara | cut -d ' ' -f 2)
-openstack endpoint delete \$sahara_endpoint_id
-openstack service delete \$sahara_service_id
+[[ -n "\$sahara_endpoint_id" ]] && openstack endpoint delete \$sahara_endpoint_id
+[[ -n "\$sahara_service_id" ]] && openstack service delete \$sahara_service_id
echo "Removing swift endpoint and service"
swift_service_id=\$(openstack service list | grep swift | cut -d ' ' -f 2)
swift_endpoint_id=\$(openstack endpoint list | grep swift | cut -d ' ' -f 2)
-openstack endpoint delete \$swift_endpoint_id
-openstack service delete \$swift_service_id
+[[ -n "\$swift_endpoint_id" ]] && openstack endpoint delete \$swift_endpoint_id
+[[ -n "\$swift_service_id" ]] && openstack service delete \$swift_service_id
+
+if [ "${deploy_options_array['dataplane']}" == 'fdio' ] || [ "${deploy_options_array['dataplane']}" == 'ovs_dpdk' ]; then
+ for flavor in \$(openstack flavor list -c Name -f value); do
+ echo "INFO: Configuring \$flavor to use hugepage"
+ nova flavor-key \$flavor set hw:mem_page_size=large
+ done
+fi
-if [ "${deploy_options_array['congress']}" == 'True' ]; then
+# TODO: Change this back to True once everything is back in
+# place with tht and puppet-congress for deployment
+if [ "${deploy_options_array['congress']}" == 'NeverTrue' ]; then
ds_configs="--config username=\$OS_USERNAME
--config tenant_name=\$OS_TENANT_NAME
--config password=\$OS_PASSWORD
- --config auth_Url=\$OS_AUTH_URL"
+ --config auth_url=\$OS_AUTH_URL"
for s in nova neutronv2 ceilometer cinder glancev2 keystone; do
ds_extra_configs=""
if [ "\$s" == "nova" ]; then
nova_micro_version=\$(nova version-list | grep CURRENT | awk '{print \$10}')
- ds_extra_configs+="--config api_version="\$nova_micro_version"
+ ds_extra_configs+="--config api_version=\$nova_micro_version"
+ fi
+ if openstack congress datasource create \$s "\$s" \$ds_configs \$ds_extra_configs; then
+ echo "INFO: Datasource: \$s created"
+ else
+ echo "WARN: Datasource: \$s could NOT be created"
fi
- openstack congress datasource create \$s "\$s" \$ds_configs \$ds_extra_configs
done
- openstack congress datasource create doctor "doctor"
+ if openstack congress datasource create doctor "doctor"; then
+ echo "INFO: Datasource: doctor created"
+ else
+ echo "WARN: Datsource: doctor could NOT be created"
+ fi
fi
+
+
+# Fix project_id and os_tenant_name not in overcloudrc
+# Deprecated openstack client does not need project_id
+# and os_tenant_name anymore but glance client and
+# Rally in generall does need it.
+# REMOVE when not needed in Rally/glance-client anymore.
+if ! grep -q "OS_PROJECT_ID" ./overcloudrc;then
+ project_id=\$(openstack project list |grep admin|awk '{print \$2}')
+ echo "export OS_PROJECT_ID=\$project_id" >> ./overcloudrc
+fi
+if ! grep -q "OS_TENANT_NAME" ./overcloudrc;then
+ echo "export OS_TENANT_NAME=admin" >> ./overcloudrc
+fi
+
+
EOI
- # for virtual, we NAT public network through Undercloud
+ # for virtual, we NAT external network through Undercloud
# same goes for baremetal if only jumphost has external connectivity
- if [ "$virtual" == "TRUE" ] || ! test_overcloud_connectivity && [ "$public_network_ipv6" != "True" ]; then
- if ! configure_undercloud_nat ${public_network_cidr}; then
- echo -e "${red}ERROR: Unable to NAT undercloud with external net: ${public_network_cidr}${reset}"
+ if [ "$virtual" == "TRUE" ] || ! test_overcloud_connectivity && [ "$external_network_ipv6" != "True" ]; then
+ if [[ "$enabled_network_list" =~ "external" ]]; then
+ nat_cidr=${external_cidr}
+ else
+ nat_cidr=${admin_cidr}
+ fi
+ if ! configure_undercloud_nat ${nat_cidr}; then
+ echo -e "${red}ERROR: Unable to NAT undercloud with external net: ${nat_cidr}${reset}"
exit 1
else
- echo -e "${blue}INFO: Undercloud VM has been setup to NAT Overcloud public network${reset}"
+ echo -e "${blue}INFO: Undercloud VM has been setup to NAT Overcloud external network${reset}"
fi
fi
# Print out the undercloud IP and dashboard URL
source stackrc
echo "Undercloud IP: $UNDERCLOUD, please connect by doing 'opnfv-util undercloud'"
-echo "Overcloud dashboard available at http://\$(heat output-show overcloud PublicVip | sed 's/"//g')/dashboard"
+echo "Overcloud dashboard available at http://\$(openstack stack output show overcloud PublicVip -f json | jq -r .output_value)/dashboard"
EOI
if [[ "$ha_enabled" == 'True' ]]; then
echo "${blue}\nChecking pacemaker service status\n${reset}"
fi
overcloud_connect "controller0" "for i in \$(sudo pcs status | grep '^* ' | cut -d ' ' -f 2 | cut -d '_' -f 1 | uniq); do echo \"WARNING: Service: \$i not running\"; done"
+ # trozet disable congress in HA until congress bugs are fixed
+ overcloud_connect "controller0" "sudo pcs resource ban openstack-congress overcloud-controller-1; sudo pcs resource ban openstack-congress overcloud-controller-2; sudo systemctl restart openstack-congress"
fi
}
Code Review / apex.git / blobdiff