local num_control_nodes
if [[ "${#deploy_options_array[@]}" -eq 0 || "${deploy_options_array['sdn_controller']}" == 'opendaylight' ]]; then
- if [ "${deploy_options_array['sdn_l3']}" == 'True' ]; then
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight_l3.yaml"
- elif [ "${deploy_options_array['sfc']}" == 'True' ]; then
+ if [ "${deploy_options_array['sfc']}" == 'True' ]; then
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight_sfc.yaml"
elif [ "${deploy_options_array['vpn']}" == 'True' ]; then
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight_sdnvpn.yaml"
elif [ "${deploy_options_array['vpn']}" == 'true' ]; then
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight_sdnvpn.yaml"
else
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight.yaml"
+ DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/neutron-opendaylight-l3.yaml"
fi
SDN_IMAGE=opendaylight
- if [ "${deploy_options_array['sfc']}" == 'True' ]; then
- SDN_IMAGE+=-sfc
- if [ ! -f $RESOURCES/overcloud-full-${SDN_IMAGE}.qcow2 ]; then
- echo "${red} $RESOURCES/overcloud-full-${SDN_IMAGE}.qcow2 is required to execute an SFC deployment."
- echo "Please install the opnfv-apex-opendaylight-sfc package to provide this overcloud image for deployment.${reset}"
- exit 1
- fi
- fi
elif [ "${deploy_options_array['sdn_controller']}" == 'opendaylight-external' ]; then
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight-external.yaml"
SDN_IMAGE=opendaylight
# Make sure the correct overcloud image is available
if [ ! -f $RESOURCES/overcloud-full-${SDN_IMAGE}.qcow2 ]; then
echo "${red} $RESOURCES/overcloud-full-${SDN_IMAGE}.qcow2 is required to execute your deployment."
- echo "Both ONOS and OpenDaylight are currently deployed from this image."
echo "Please install the opnfv-apex package to provide this overcloud image for deployment.${reset}"
exit 1
fi
-a overcloud-full.qcow2
fi
else
+ sudo sed -i '/NeutronOVSDataPathType:/c\ NeutronOVSDataPathType: netdev' /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml
LIBGUESTFS_BACKEND=direct virt-customize --run-command "yum install -y /root/dpdk_rpms/*" \
+ --run-command "sed -i '/RuntimeDirectoryMode=.*/d' /usr/lib/systemd/system/openvswitch-nonetwork.service" \
+ --run-command "printf \"%s\\n\" RuntimeDirectoryMode=0775 Group=qemu UMask=0002 >> /usr/lib/systemd/system/openvswitch-nonetwork.service" \
+ --run-command "sed -i 's/\\(^\\s\\+\\)\\(start_daemon "$OVS_VSWITCHD_PRIORITY"\\)/\\1umask 0002 \\&\\& \\2/' /usr/share/openvswitch/scripts/ovs-ctl" \
-a overcloud-full.qcow2
fi
+
EOI
elif [ "${deploy_options_array['dataplane']}" != 'ovs' ]; then
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" "LIBGUESTFS_BACKEND=direct virt-customize -a overcloud-full.qcow2 --root-password password:opnfvapex"
fi
+ # upgrade ovs into ovs 2.5.90 with NSH function if SFC is enabled
+ if [[ "${deploy_options_array['sfc']}" == 'True' && "${deploy_options_array['dataplane']}" == 'ovs' ]]; then
+ ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
+ LIBGUESTFS_BACKEND=direct virt-customize --run-command "yum install -y /root/ovs/rpm/rpmbuild/RPMS/x86_64/${ovs_kmod_rpm_name}" \
+ --run-command "yum upgrade -y /root/ovs/rpm/rpmbuild/RPMS/x86_64/${ovs_rpm_name}" \
+ -a overcloud-full.qcow2
+EOI
+ fi
+
# Set ODL version accordingly
- if [[ "${deploy_options_array['sdn_controller']}" == 'opendaylight' && "${deploy_options_array['odl_version']}" == 'boron' ]]; then
+ if [[ "${deploy_options_array['sdn_controller']}" == 'opendaylight' && -n "${deploy_options_array['odl_version']}" ]]; then
+ case "${deploy_options_array['odl_version']}" in
+ beryllium) odl_version=''
+ ;;
+ boron) odl_version='boron'
+ ;;
+ cabron) odl_version='master'
+ ;;
+ *) echo -e "${red}Invalid ODL version ${deploy_options_array['odl_version']}. Please use 'carbon' or 'boron' values.${reset}"
+ exit 1
+ ;;
+ esac
+
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
LIBGUESTFS_BACKEND=direct virt-customize --run-command "yum -y remove opendaylight" \
- --run-command "yum -y install /root/boron/*" \
+ --run-command "yum -y install /root/${odl_version}/*" \
-a overcloud-full.qcow2
EOI
fi
# set NIC heat params and resource registry
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
-sudo sed -i '/TenantNIC:/c\ TenantNIC: '${private_network_compute_interface} /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml
-sudo sed -i '/PublicNIC:/c\ PublicNIC: '${public_network_compute_interface} /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml
+if [ -n "${private_network_compute_interface}" ]; then
+ sudo sed -i '/ComputeTenantNIC:/c\ ComputeTenantNIC: '${private_network_compute_interface} /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml
+fi
+if [ -n "${private_network_controller_interface}" ]; then
+ sudo sed -i '/ControllerTenantNIC:/c\ ControllerTenantNIC: '${private_network_controller_interface} /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml
+fi
+# TODO: PublicNIC is not used today, however, in the future, we'll bind public nic to DPDK as well for certain scenarios. At that time,
+# we'll need to make sure public network is enabled.
+if [ -n "${public_network_compute_interface}" ]; then
+ sudo sed -i '/ComputePublicNIC:/c\ ComputePublicNIC: '${public_network_compute_interface} /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml
+fi
+if [ -n "${public_network_controller_interface}" ]; then
+ sudo sed -i '/ControllerPublicNIC:/c\ ControllerPublicNIC: '${public_network_controller_interface} /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml
+fi
EOI
+ echo -e "${blue}INFO: Including /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml ${reset}"
+ if [ "$debug" == 'TRUE' ]; then
+ ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" "cat /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml"
+ fi
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml"
fi
- # make sure ceph is installed
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/storage-environment.yaml"
+ # check if ceph should be enabled
+ if [ "${deploy_options_array['ceph']}" == 'True' ]; then
+ DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/storage-environment.yaml"
+ fi
+
+ #DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/network-isolation.yaml"
+ DEPLOY_OPTIONS+=" -e network-environment.yaml"
+
# get number of nodes available in inventory
num_control_nodes=$(ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "grep -c profile:control /home/stack/instackenv.json")
DEPLOY_OPTIONS+=" --compute-scale ${num_compute_nodes}"
fi
- if [[ "$net_isolation_enabled" == "TRUE" ]]; then
- #DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/network-isolation.yaml"
- DEPLOY_OPTIONS+=" -e network-environment.yaml"
- fi
-
- if [[ "$ha_enabled" == "True" ]] || [[ "$net_isolation_enabled" == "TRUE" ]]; then
- DEPLOY_OPTIONS+=" --ntp-server $ntp_server"
- fi
+ DEPLOY_OPTIONS+=" --ntp-server $ntp_server"
DEPLOY_OPTIONS+=" --control-flavor control --compute-flavor compute"
if [[ "$virtual" == "TRUE" ]]; then
DEPLOY_OPTIONS+=" -e virtual-environment.yaml"
fi
- DEPLOY_OPTIONS+=" -e opnfv-environment.yaml"
+ DEPLOY_OPTIONS+=" -e ${ENV_FILE}"
echo -e "${blue}INFO: Deploy options set:\n${DEPLOY_OPTIONS}${reset}"
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
if [ "${deploy_options_array['tacker']}" == 'False' ]; then
- sed -i '/EnableTacker:/c\ EnableTacker: false' opnfv-environment.yaml
+ sed -i '/EnableTacker:/c\ EnableTacker: false' ${ENV_FILE}
fi
# Create a key for use by nova for live migration
echo "Creating nova SSH key for nova resize support"
ssh-keygen -f nova_id_rsa -b 1024 -P ""
public_key=\'\$(cat nova_id_rsa.pub | cut -d ' ' -f 2)\'
-sed -i "s#replace_public_key:#key: \$public_key#g" opnfv-environment.yaml
-python -c 'open("opnfv-environment-new.yaml", "w").write((open("opnfv-environment.yaml").read().replace("replace_private_key:", "key: \"" + "".join(open("nova_id_rsa").readlines()).replace("\\n","\\\n") + "\"")))'
-mv -f opnfv-environment-new.yaml opnfv-environment.yaml
+sed -i "s#replace_public_key:#key: \$public_key#g" ${ENV_FILE}
+python -c 'open("opnfv-environment-new.yaml", "w").write((open("${ENV_FILE}").read().replace("replace_private_key:", "key: \"" + "".join(open("nova_id_rsa").readlines()).replace("\\n","\\\n") + "\"")))'
+mv -f opnfv-environment-new.yaml ${ENV_FILE}
source stackrc
set -o errexit
echo "Configuring undercloud and discovering nodes"
openstack baremetal import --json instackenv.json
-openstack baremetal configure boot
+
bash -x set_perf_images.sh ${performance_roles[@]}
-#if [[ -z "$virtual" ]]; then
-# openstack baremetal introspection bulk start
-#fi
+if [[ -z "$virtual" ]]; then
+ openstack baremetal introspection bulk start
+ if [[ -n "$root_disk_list" ]]; then
+ openstack baremetal configure boot -root-device=${root_disk_list}
+ else
+ openstack baremetal configure boot
+ fi
+else
+ openstack baremetal configure boot
+fi
+
echo "Configuring flavors"
for flavor in baremetal control compute; do
echo -e "${blue}INFO: Updating flavor: \${flavor}${reset}"
dns_server_ext="\${dns_server_ext} --dns-nameserver \${dns_server}"
done
neutron subnet-update \$(neutron subnet-list | grep -Ev "id|tenant|external|storage" | grep -v \\\\-\\\\- | awk {'print \$2'}) \${dns_server_ext}
-sed -i '/CloudDomain:/c\ CloudDomain: '${domain_name} opnfv-environment.yaml
+sed -i '/CloudDomain:/c\ CloudDomain: '${domain_name} ${ENV_FILE}
echo "Executing overcloud deployment, this should run for an extended period without output."
sleep 60 #wait for Hypervisor stats to check-in to nova
# save deploy command so it can be used for debugging
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
source stackrc
openstack overcloud deploy --templates $DEPLOY_OPTIONS --timeout 90
-if ! heat stack-list | grep CREATE_COMPLETE 1>/dev/null; then
+if ! openstack stack list | grep CREATE_COMPLETE 1>/dev/null; then
$(typeset -f debug_stack)
debug_stack
exit 1