#!/usr/bin/env bash
+##############################################################################
+# Copyright (c) 2015 Tim Rozet (Red Hat), Dan Radez (Red Hat) and others.
+#
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
# Common Functions used by OPNFV Apex
# author: Tim Rozet (trozet@redhat.com)
-##find ip of interface
-##params: interface name
-function find_ip {
- ip addr show $1 | grep -Eo '^\s+inet\s+[\.0-9]+' | awk '{print $2}'
-}
-
-##finds subnet of ip and netmask
-##params: ip, netmask
-function find_subnet {
- IFS=. read -r i1 i2 i3 i4 <<< "$1"
- IFS=. read -r m1 m2 m3 m4 <<< "$2"
- printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
-}
-
-##verify subnet has at least n IPs
-##params: subnet mask, n IPs
-function verify_subnet_size {
- IFS=. read -r i1 i2 i3 i4 <<< "$1"
- num_ips_required=$2
-
- ##this function assumes you would never need more than 254
- ##we check here to make sure
- if [ "$num_ips_required" -ge 254 ]; then
- echo -e "\n\n${red}ERROR: allocating more than 254 IPs is unsupported...Exiting${reset}\n\n"
- return 1
- fi
-
- ##we just return if 3rd octet is not 255
- ##because we know the subnet is big enough
- if [ "$i3" -ne 255 ]; then
- return 0
- elif [ $((254-$i4)) -ge "$num_ips_required" ]; then
- return 0
- else
- echo -e "\n\n${red}ERROR: Subnet is too small${reset}\n\n"
- return 1
- fi
-}
-
-##finds last usable ip (broadcast minus 1) of a subnet from an IP and netmask
-## Warning: This function only works for IPv4 at the moment.
-##params: ip, netmask
-function find_last_ip_subnet {
- IFS=. read -r i1 i2 i3 i4 <<< "$1"
- IFS=. read -r m1 m2 m3 m4 <<< "$2"
- IFS=. read -r s1 s2 s3 s4 <<< "$((i1 & m1)).$((i2 & m2)).$((i3 & m3)).$((i4 & m4))"
- printf "%d.%d.%d.%d\n" "$((255 - $m1 + $s1))" "$((255 - $m2 + $s2))" "$((255 - $m3 + $s3))" "$((255 - $m4 + $s4 - 1))"
-}
-
-##increments subnet by a value
-##params: ip, value
-##assumes low value
-function increment_subnet {
- IFS=. read -r i1 i2 i3 i4 <<< "$1"
- printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 | $2))"
-}
-
-##finds netmask of interface
-##params: interface
-##returns long format 255.255.x.x
-function find_netmask {
- ifconfig $1 | grep -Eo 'netmask\s+[\.0-9]+' | awk '{print $2}'
-}
-
-##finds short netmask of interface
-##params: interface
-##returns short format, ex: /21
-function find_short_netmask {
- echo "/$(ip addr show $1 | grep -Eo '^\s+inet\s+[\/\.0-9]+' | awk '{print $2}' | cut -d / -f2)"
-}
-
-##increments next IP
-##params: ip
-##assumes a /24 subnet
-function next_ip {
- baseaddr="$(echo $1 | cut -d. -f1-3)"
- lsv="$(echo $1 | cut -d. -f4)"
- if [ "$lsv" -ge 254 ]; then
- return 1
- fi
- ((lsv++))
- echo $baseaddr.$lsv
-}
-
-##subtracts a value from an IP address
-##params: last ip, ip_count
-##assumes ip_count is less than the last octect of the address
-subtract_ip() {
- IFS=. read -r i1 i2 i3 i4 <<< "$1"
- ip_count=$2
- if [ $i4 -lt $ip_count ]; then
- echo -e "\n\n${red}ERROR: Can't subtract $ip_count from IP address $1 Exiting${reset}\n\n"
- exit 1
- fi
- printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 - $ip_count ))"
-}
-
-##check if IP is in use
-##params: ip
-##ping ip to get arp entry, then check arp
-function is_ip_used {
- ping -c 5 $1 > /dev/null 2>&1
- arp -n | grep "$1 " | grep -iv incomplete > /dev/null 2>&1
-}
-
-##find next usable IP
-##params: ip
-function next_usable_ip {
- new_ip=$(next_ip $1)
- while [ "$new_ip" ]; do
- if ! is_ip_used $new_ip; then
- echo $new_ip
- return 0
- fi
- new_ip=$(next_ip $new_ip)
- done
- return 1
-}
-
-##increment ip by value
-##params: ip, amount to increment by
-##increment_ip $next_private_ip 10
-function increment_ip {
- baseaddr="$(echo $1 | cut -d. -f1-3)"
- lsv="$(echo $1 | cut -d. -f4)"
- incrval=$2
- lsv=$((lsv+incrval))
- if [ "$lsv" -ge 254 ]; then
- return 1
- fi
- echo $baseaddr.$lsv
-}
-
-##finds gateway on system
-##params: interface to validate gateway on (optional)
-##find_gateway em1
-function find_gateway {
- local gw gw_interface
- gw=$(ip route | grep default | awk '{print $3}')
- gw_interface=$(ip route get $gw | awk '{print $3}')
- if [ -n "$1" ]; then
- if [ "$gw_interface" == "$1" ]; then
- echo ${gw}
- fi
- fi
-}
-
-##finds subnet in CIDR notation for interface
-##params: interface to find CIDR
-function find_cidr {
- local cidr network ip netmask short_mask
- ip=$(find_ip $1)
- netmask=$(find_netmask $1)
- if [[ -z "$ip" || -z "$netmask" ]]; then
- return 1
- fi
- network=$(find_subnet ${ip} ${netamsk})
- short_mask=$(find_short_netmask $1)
- if [[ -z "$network" || -z "$short_mask" ]]; then
- return 1
- fi
- cidr="${subnet}'\'${short_mask}"
- echo ${cidr}
+##converts subnet mask to prefix
+##params: subnet mask
+function prefix2mask {
+ # Number of args to shift, 255..255, first non-255 byte, zeroes
+ set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0
+ [ $1 -gt 1 ] && shift $1 || shift
+ echo ${1-0}.${2-0}.${3-0}.${4-0}
}
-##finds block of usable IP addresses for an interface
-##simply returns at the moment the correct format
-##after first 20 IPs, and leave 20 IPs at end of subnet (for floating ips, etc)
-##params: interface to find IP
-function find_usable_ip_range {
- local interface_ip subnet_mask first_block_ip last_block_ip
- interface_ip=$(find_ip $1)
- subnet_mask=$(find_netmask $1)
- if [[ -z "$interface_ip" || -z "$subnet_mask" ]]; then
- return 1
- fi
- interface_ip=$(increment_ip ${interface_ip} 20)
- first_block_ip=$(next_usable_ip ${interface_ip})
- if [ -z "$first_block_ip" ]; then
+##find ip of interface
+##params: interface name, address family
+function find_ip {
+ local af
+ if [[ -z "$1" ]]; then
return 1
fi
- last_block_ip=$(find_last_ip_subnet ${interface_ip} ${subnet_mask})
- if [ -z "$last_block_ip" ]; then
- return 1
+ if [[ -z "$2" ]]; then
+ af=4
else
- last_block_ip=$(subtract_ip ${last_block_ip} 20)
- echo "${first_block_ip},${last_block_ip}"
- fi
-
-}
-
-##generates usable IP range in correct format based on CIDR
-##assumes the first 20 IPs are used (by instack or otherwise)
-##params: cidr
-function generate_usable_ip_range {
- local first_ip first_block_ip last_block_ip
- first_ip=$(ipcalc -nb $1 | grep HostMin: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
- first_block_ip=$(increment_ip ${first_ip} 20)
- last_block_ip=$(ipcalc -nb $1 | grep HostMax: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
- if [[ -z "$first_block_ip" || -z "$last_block_ip" ]]; then
- return 1
- else
- last_block_ip=$(subtract_ip ${last_block_ip} 20)
- echo "${first_block_ip},${last_block_ip}"
- fi
-}
-
-##find the instack IP address
-##finds first usable IP on subnet
-##params: interface
-function find_provisioner_ip {
- local interface_ip
- interface_ip=$(find_ip $1)
- if [ -z "$interface_ip" ]; then
- return 1
- fi
- echo $(increment_ip ${interface_ip} 1)
-}
-
-##generates instack IP address based on CIDR
-##params: cidr
-function generate_provisioner_ip {
- local provisioner_ip
- provisioner_ip=$(ipcalc -nb $1 | grep HostMin: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
-}
-
-##finds the dhcp range available via interface
-##uses first 8 IPs, after 2nd IP
-##params: interface
-function find_dhcp_range {
- local dhcp_range_start dhcp_range_end interface_ip
- interface_ip=$(find_ip $1)
- if [ -z "$interface_ip" ]; then
- return 1
- fi
- dhcp_range_start=$(increment_ip ${interface_ip} 2)
- dhcp_range_end=$(increment_ip ${dhcp_range_start} 8)
- echo "${dhcp_range_start},${dhcp_range_end}"
-}
-
-##generates the dhcp range available via CIDR
-##uses first 8 IPs, after 1st IP
-##params: cidr
-function generate_dhcp_range {
- local dhcp_range_start dhcp_range_end first_ip
- first_ip=$(ipcalc -nb $1 | grep HostMin: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
- if [ -z "$first_ip" ]; then
- return 1
- fi
- dhcp_range_start=$(increment_ip ${first_ip} 1)
- dhcp_range_end=$(increment_ip ${dhcp_range_start} 8)
- echo "${dhcp_range_start},${dhcp_range_end}"
-}
-
-##finds the introspection range available via interface
-##uses 8 IPs, after the first 10 IPs
-##params: interface
-function find_introspection_range {
- local inspect_range_start inspect_range_end interface_ip
- interface_ip=$(find_ip $1)
- if [ -z "$interface_ip" ]; then
- return 1
+ af=$2
fi
- inspect_range_start=$(increment_ip ${interface_ip} 10)
- inspect_range_end=$(increment_ip ${inspect_range_start} 8)
- echo "${inspect_range_start},${inspect_range_end}"
-}
-
-##generate the introspection range available via CIDR
-##uses 8 IPs, after the first 10 IPs
-##params: cidr
-function generate_introspection_range {
- local inspect_range_start inspect_range_end first_ip
- first_ip=$(ipcalc -nb $1 | grep HostMin: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
- if [ -z "$first_ip" ]; then
- return 1
- fi
- inspect_range_start=$(increment_ip ${first_ip} 10)
- inspect_range_end=$(increment_ip ${inspect_range_start} 8)
- echo "${inspect_range_start},${inspect_range_end}"
-}
-##finds the floating ip range available via interface
-##uses last 20 IPs of a subnet
-##params: interface
-function find_floating_ip_range {
- local float_range_start float_range_end interface_ip subnet_mask
- interface_ip=$(find_ip $1)
- subnet_mask=$(find_netmask $1)
- if [[ -z "$interface_ip" || -z "$subnet_mask" ]]; then
- return 1
- fi
- float_range_end=$(find_last_ip_subnet ${interface_ip} ${subnet_mask})
- float_range_start=$(subtract_ip ${float_range_end} 19)
- echo "${float_range_start},${float_range_end}"
-}
-
-##generate the floating range available via CIDR
-##uses last 20 IPs of subnet
-##params: cidr
-function generate_floating_ip_range {
- local float_range_start float_range_end last_ip
- last_ip=$(ipcalc -nb $1 | grep HostMax: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
- if [ -z "$last_ip" ]; then
- return 1
- fi
- float_range_start=$(subtract_ip ${last_ip} 19)
- float_range_end=${last_ip}
- echo "${float_range_start},${float_range_end}"
+ python3.4 -B $LIB/python/apex_python_utils.py find-ip -i $1 -af $af
}
##attach interface to OVS and set the network config correctly
##public indicates attaching to a public interface
function attach_interface_to_ovs {
local bridge interface
- local if_ip if_mask if_gw if_file ovs_file
+ local if_ip if_mask if_gw if_file ovs_file if_prefix
+ local if_metric if_dns1 if_dns2
if [[ -z "$1" || -z "$2" ]]; then
return 1
if_ip=$(sed -n 's/^IPADDR=\(.*\)$/\1/p' ${if_file})
if_mask=$(sed -n 's/^NETMASK=\(.*\)$/\1/p' ${if_file})
if_gw=$(sed -n 's/^GATEWAY=\(.*\)$/\1/p' ${if_file})
+ if_metric=$(sed -n 's/^METRIC=\(.*\)$/\1/p' ${if_file})
+ if_dns1=$(sed -n 's/^DNS1=\(.*\)$/\1/p' ${if_file})
+ if_dns2=$(sed -n 's/^DNS2=\(.*\)$/\1/p' ${if_file})
else
echo "ERROR: ifcfg file missing for ${interface}"
return 1
fi
+ if [ -z "$if_mask" ]; then
+ # we can look for PREFIX here, then convert it to NETMASK
+ if_prefix=$(sed -n 's/^PREFIX=\(.*\)$/\1/p' ${if_file})
+ if_mask=$(prefix2mask ${if_prefix})
+ fi
+
if [[ -z "$if_ip" || -z "$if_mask" ]]; then
- echo "ERROR: IPADDR or NETMASK missing for ${interface}"
+ echo "ERROR: IPADDR or NETMASK/PREFIX missing for ${interface}"
return 1
elif [[ -z "$if_gw" && "$3" == "public_network" ]]; then
echo "ERROR: GATEWAY missing for ${interface}, which is public"
OVS_BRIDGE=${bridge}
PROMISC=yes" > ${if_file}
- if [ -z ${if_gw} ]; then
+
# create bridge cfg
echo "DEVICE=${bridge}
DEVICETYPE=ovs
PROMISC=yes
PEERDNS=no" > ${ovs_file}
- else
- echo "DEVICE=${bridge}
-DEVICETYPE=ovs
-IPADDR=${if_ip}
-NETMASK=${if_mask}
-BOOTPROTO=static
-ONBOOT=yes
-TYPE=OVSBridge
-PROMISC=yes
-GATEWAY=${if_gw}
-PEERDNS=no" > ${ovs_file}
+ if [ -n "$if_gw" ]; then
+ echo "GATEWAY=${if_gw}" >> ${ovs_file}
+ fi
+
+ if [ -n "$if_metric" ]; then
+ echo "METRIC=${if_metric}" >> ${ovs_file}
+ fi
+
+ if [[ -n "$if_dns1" || -n "$if_dns2" ]]; then
+ sed -i '/PEERDNS/c\PEERDNS=yes' ${ovs_file}
+
+ if [ -n "$if_dns1" ]; then
+ echo "DNS1=${if_dns1}" >> ${ovs_file}
+ fi
+
+ if [ -n "$if_dns2" ]; then
+ echo "DNS2=${if_dns2}" >> ${ovs_file}
+ fi
fi
sudo systemctl restart network
local bridge
local port_output ports_no_orig
local net_path
- local if_ip if_mask if_gw
+ local if_ip if_mask if_gw if_prefix
+ local if_metric if_dns1 if_dns2
net_path=/etc/sysconfig/network-scripts/
if [[ -z "$1" ]]; then
elif [ -e ${net_path}/ifcfg-${line}.orig ]; then
mv -f ${net_path}/ifcfg-${line}.orig ${net_path}/ifcfg-${line}
elif [ -e ${net_path}/ifcfg-${bridge} ]; then
- if_ip=$(sed -n 's/^IPADDR=\(.*\)$/\1/p' ${if_file})
- if_mask=$(sed -n 's/^NETMASK=\(.*\)$/\1/p' ${if_file})
- if_gw=$(sed -n 's/^GATEWAY=\(.*\)$/\1/p' ${if_file})
+ if_ip=$(sed -n 's/^IPADDR=\(.*\)$/\1/p' ${net_path}/ifcfg-${bridge})
+ if_mask=$(sed -n 's/^NETMASK=\(.*\)$/\1/p' ${net_path}/ifcfg-${bridge})
+ if_gw=$(sed -n 's/^GATEWAY=\(.*\)$/\1/p' ${net_path}/ifcfg-${bridge})
+ if_metric=$(sed -n 's/^METRIC=\(.*\)$/\1/p' ${net_path}/ifcfg-${bridge})
+ if_dns1=$(sed -n 's/^DNS1=\(.*\)$/\1/p' ${net_path}/ifcfg-${bridge})
+ if_dns2=$(sed -n 's/^DNS2=\(.*\)$/\1/p' ${net_path}/ifcfg-${bridge})
+
+ if [ -z "$if_mask" ]; then
+ if_prefix=$(sed -n 's/^PREFIX=[^0-9]*\([0-9][0-9]*\)[^0-9]*$/\1/p' ${net_path}/ifcfg-${bridge})
+ if_mask=$(prefix2mask ${if_prefix})
+ fi
if [[ -z "$if_ip" || -z "$if_mask" ]]; then
- echo "ERROR: IPADDR or NETMASK missing for ${bridge} and no .orig file for interface ${line}"
+ echo "ERROR: IPADDR or PREFIX/NETMASK missing for ${bridge} and no .orig file for interface ${line}"
return 1
fi
- if [ -z ${if_gw} ]; then
- # create if cfg
- echo "DEVICE=${line}
-IPADDR=${if_ip}
-NETMASK=${if_mask}
-BOOTPROTO=static
-ONBOOT=yes
-TYPE=Ethernet
-NM_CONTROLLED=no
-PEERDNS=no" > ${net_path}/ifcfg-${line}
- else
- echo "DEVICE=${line}
+ # create if cfg
+ echo "DEVICE=${line}
IPADDR=${if_ip}
NETMASK=${if_mask}
BOOTPROTO=static
ONBOOT=yes
TYPE=Ethernet
NM_CONTROLLED=no
-GATEWAY=${if_gw}
PEERDNS=no" > ${net_path}/ifcfg-${line}
+
+ if [ -n "$if_gw" ]; then
+ echo "GATEWAY=${if_gw}" >> ${net_path}/ifcfg-${line}
+ fi
+
+ if [ -n "$if_metric" ]; then
+ echo "METRIC=${if_metric}" >> ${net_path}/ifcfg-${line}
+ fi
+
+ if [[ -n "$if_dns1" || -n "$if_dns2" ]]; then
+ sed -i '/PEERDNS/c\PEERDNS=yes' ${net_path}/ifcfg-${line}
+
+ if [ -n "$if_dns1" ]; then
+ echo "DNS1=${if_dns1}" >> ${net_path}/ifcfg-${line}
+ fi
+
+ if [ -n "$if_dns2" ]; then
+ echo "DNS2=${if_dns2}" >> ${net_path}/ifcfg-${line}
+ fi
fi
break
else
sudo sed -i 's/IPADDR=.*//' ${net_path}/ifcfg-${bridge}
sudo sed -i 's/NETMASK=.*//' ${net_path}/ifcfg-${bridge}
sudo sed -i 's/GATEWAY=.*//' ${net_path}/ifcfg-${bridge}
+ sudo sed -i 's/DNS1=.*//' ${net_path}/ifcfg-${bridge}
+ sudo sed -i 's/DNS2=.*//' ${net_path}/ifcfg-${bridge}
+ sudo sed -i 's/METRIC=.*//' ${net_path}/ifcfg-${bridge}
+ sudo sed -i 's/PEERDNS=.*//' ${net_path}/ifcfg-${bridge}
sudo systemctl restart network
}
+
+# Update iptables rule for external network reach internet
+# for virtual deployments
+# params: external_cidr
+function configure_undercloud_nat {
+ local external_cidr
+ if [[ -z "$1" ]]; then
+ return 1
+ else
+ external_cidr=$1
+ fi
+
+ ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" <<EOI
+iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
+iptables -t nat -A POSTROUTING -s ${external_cidr} -o eth0 -j MASQUERADE
+iptables -A FORWARD -i eth2 -j ACCEPT
+iptables -A FORWARD -s ${external_cidr} -m state --state ESTABLISHED,RELATED -j ACCEPT
+service iptables save
+EOI
+}
+
+# Interactive prompt handler
+# params: step stage, ex. deploy, undercloud install, etc
+function prompt_user {
+ while [ 1 ]; do
+ echo -n "Would you like to proceed with ${1}? (y/n) "
+ read response
+ if [ "$response" == 'y' ]; then
+ return 0
+ elif [ "$response" == 'n' ]; then
+ return 1
+ else
+ continue
+ fi
+ done
+}
+
+##checks if prefix exists in string
+##params: string, prefix
+##usage: contains_prefix "deploy_setting_launcher=1" "deploy_setting"
+contains_prefix() {
+ local mystr=$1
+ local prefix=$2
+ if echo $mystr | grep -E "^$prefix.*$" > /dev/null; then
+ return 0
+ else
+ return 1
+ fi
+}
+
+##verify internet connectivity
+#params: none
+function verify_internet {
+ if ping -c 2 $ping_site > /dev/null; then
+ if ping -c 2 www.google.com > /dev/null; then
+ echo "${blue}Internet connectivity detected${reset}"
+ return 0
+ else
+ echo "${red}Internet connectivity detected, but DNS lookup failed${reset}"
+ return 1
+ fi
+ else
+ echo "${red}No internet connectivity detected${reset}"
+ return 1
+ fi
+}
+
+##tests if overcloud nodes have external connectivity
+#params:none
+function test_overcloud_connectivity {
+ for node in $(undercloud_connect stack ". stackrc && nova list" | grep -Eo "controller-[0-9]+|compute-[0-9]+" | tr -d -) ; do
+ if ! overcloud_connect $node "ping -c 2 $ping_site > /dev/null"; then
+ echo "${blue}Node ${node} was unable to ping site ${ping_site}${reset}"
+ return 1
+ fi
+ done
+ echo "${blue}Overcloud external connectivity OK${reset}"
+}
+
Code Review / apex.git / blobdiff