Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / sound / soc / sh / siu_dai.c
diff --git a/kernel/sound/soc/sh/siu_dai.c b/kernel/sound/soc/sh/siu_dai.c
new file mode 100644 (file)
index 0000000..abb0d95
--- /dev/null
@@ -0,0 +1,858 @@
+/*
+ * siu_dai.c - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
+ *
+ * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <asm/clock.h>
+#include <asm/siu.h>
+
+#include <sound/control.h>
+#include <sound/soc.h>
+
+#include "siu.h"
+
+/* Board specifics */
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
+# define SIU_MAX_VOLUME                0x1000
+#else
+# define SIU_MAX_VOLUME                0x7fff
+#endif
+
+#define PRAM_SIZE      0x2000
+#define XRAM_SIZE      0x800
+#define YRAM_SIZE      0x800
+
+#define XRAM_OFFSET    0x4000
+#define YRAM_OFFSET    0x6000
+#define REG_OFFSET     0xc000
+
+#define PLAYBACK_ENABLED       1
+#define CAPTURE_ENABLED                2
+
+#define VOLUME_CAPTURE         0
+#define VOLUME_PLAYBACK                1
+#define DFLT_VOLUME_LEVEL      0x08000800
+
+/*
+ * SPDIF is only available on port A and on some SIU implementations it is only
+ * available for input. Due to the lack of hardware to test it, SPDIF is left
+ * disabled in this driver version
+ */
+struct format_flag {
+       u32     i2s;
+       u32     pcm;
+       u32     spdif;
+       u32     mask;
+};
+
+struct port_flag {
+       struct format_flag      playback;
+       struct format_flag      capture;
+};
+
+struct siu_info *siu_i2s_data;
+
+static struct port_flag siu_flags[SIU_PORT_NUM] = {
+       [SIU_PORT_A] = {
+               .playback = {
+                       .i2s    = 0x50000000,
+                       .pcm    = 0x40000000,
+                       .spdif  = 0x80000000,   /* not on all SIU versions */
+                       .mask   = 0xd0000000,
+               },
+               .capture = {
+                       .i2s    = 0x05000000,
+                       .pcm    = 0x04000000,
+                       .spdif  = 0x08000000,
+                       .mask   = 0x0d000000,
+               },
+       },
+       [SIU_PORT_B] = {
+               .playback = {
+                       .i2s    = 0x00500000,
+                       .pcm    = 0x00400000,
+                       .spdif  = 0,            /* impossible - turn off */
+                       .mask   = 0x00500000,
+               },
+               .capture = {
+                       .i2s    = 0x00050000,
+                       .pcm    = 0x00040000,
+                       .spdif  = 0,            /* impossible - turn off */
+                       .mask   = 0x00050000,
+               },
+       },
+};
+
+static void siu_dai_start(struct siu_port *port_info)
+{
+       struct siu_info *info = siu_i2s_data;
+       u32 __iomem *base = info->reg;
+
+       dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
+
+       /* Issue software reset to siu */
+       siu_write32(base + SIU_SRCTL, 0);
+
+       /* Wait for the reset to take effect */
+       udelay(1);
+
+       port_info->stfifo = 0;
+       port_info->trdat = 0;
+
+       /* portA, portB, SIU operate */
+       siu_write32(base + SIU_SRCTL, 0x301);
+
+       /* portA=256fs, portB=256fs */
+       siu_write32(base + SIU_CKCTL, 0x40400000);
+
+       /* portA's BRG does not divide SIUCKA */
+       siu_write32(base + SIU_BRGASEL, 0);
+       siu_write32(base + SIU_BRRA, 0);
+
+       /* portB's BRG divides SIUCKB by half */
+       siu_write32(base + SIU_BRGBSEL, 1);
+       siu_write32(base + SIU_BRRB, 0);
+
+       siu_write32(base + SIU_IFCTL, 0x44440000);
+
+       /* portA: 32 bit/fs, master; portB: 32 bit/fs, master */
+       siu_write32(base + SIU_SFORM, 0x0c0c0000);
+
+       /*
+        * Volume levels: looks like the DSP firmware implements volume controls
+        * differently from what's described in the datasheet
+        */
+       siu_write32(base + SIU_SBDVCA, port_info->playback.volume);
+       siu_write32(base + SIU_SBDVCB, port_info->capture.volume);
+}
+
+static void siu_dai_stop(struct siu_port *port_info)
+{
+       struct siu_info *info = siu_i2s_data;
+       u32 __iomem *base = info->reg;
+
+       /* SIU software reset */
+       siu_write32(base + SIU_SRCTL, 0);
+}
+
+static void siu_dai_spbAselect(struct siu_port *port_info)
+{
+       struct siu_info *info = siu_i2s_data;
+       struct siu_firmware *fw = &info->fw;
+       u32 *ydef = fw->yram0;
+       u32 idx;
+
+       /* path A use */
+       if (!info->port_id)
+               idx = 1;                /* portA */
+       else
+               idx = 2;                /* portB */
+
+       ydef[0] = (fw->spbpar[idx].ab1a << 16) |
+               (fw->spbpar[idx].ab0a << 8) |
+               (fw->spbpar[idx].dir << 7) | 3;
+       ydef[1] = fw->yram0[1]; /* 0x03000300 */
+       ydef[2] = (16 / 2) << 24;
+       ydef[3] = fw->yram0[3]; /* 0 */
+       ydef[4] = fw->yram0[4]; /* 0 */
+       ydef[7] = fw->spbpar[idx].event;
+       port_info->stfifo |= fw->spbpar[idx].stfifo;
+       port_info->trdat |= fw->spbpar[idx].trdat;
+}
+
+static void siu_dai_spbBselect(struct siu_port *port_info)
+{
+       struct siu_info *info = siu_i2s_data;
+       struct siu_firmware *fw = &info->fw;
+       u32 *ydef = fw->yram0;
+       u32 idx;
+
+       /* path B use */
+       if (!info->port_id)
+               idx = 7;                /* portA */
+       else
+               idx = 8;                /* portB */
+
+       ydef[5] = (fw->spbpar[idx].ab1a << 16) |
+               (fw->spbpar[idx].ab0a << 8) | 1;
+       ydef[6] = fw->spbpar[idx].event;
+       port_info->stfifo |= fw->spbpar[idx].stfifo;
+       port_info->trdat |= fw->spbpar[idx].trdat;
+}
+
+static void siu_dai_open(struct siu_stream *siu_stream)
+{
+       struct siu_info *info = siu_i2s_data;
+       u32 __iomem *base = info->reg;
+       u32 srctl, ifctl;
+
+       srctl = siu_read32(base + SIU_SRCTL);
+       ifctl = siu_read32(base + SIU_IFCTL);
+
+       switch (info->port_id) {
+       case SIU_PORT_A:
+               /* portA operates */
+               srctl |= 0x200;
+               ifctl &= ~0xc2;
+               break;
+       case SIU_PORT_B:
+               /* portB operates */
+               srctl |= 0x100;
+               ifctl &= ~0x31;
+               break;
+       }
+
+       siu_write32(base + SIU_SRCTL, srctl);
+       /* Unmute and configure portA */
+       siu_write32(base + SIU_IFCTL, ifctl);
+}
+
+/*
+ * At the moment only fixed Left-upper, Left-lower, Right-upper, Right-lower
+ * packing is supported
+ */
+static void siu_dai_pcmdatapack(struct siu_stream *siu_stream)
+{
+       struct siu_info *info = siu_i2s_data;
+       u32 __iomem *base = info->reg;
+       u32 dpak;
+
+       dpak = siu_read32(base + SIU_DPAK);
+
+       switch (info->port_id) {
+       case SIU_PORT_A:
+               dpak &= ~0xc0000000;
+               break;
+       case SIU_PORT_B:
+               dpak &= ~0x00c00000;
+               break;
+       }
+
+       siu_write32(base + SIU_DPAK, dpak);
+}
+
+static int siu_dai_spbstart(struct siu_port *port_info)
+{
+       struct siu_info *info = siu_i2s_data;
+       u32 __iomem *base = info->reg;
+       struct siu_firmware *fw = &info->fw;
+       u32 *ydef = fw->yram0;
+       int cnt;
+       u32 __iomem *add;
+       u32 *ptr;
+
+       /* Load SPB Program in PRAM */
+       ptr = fw->pram0;
+       add = info->pram;
+       for (cnt = 0; cnt < PRAM0_SIZE; cnt++, add++, ptr++)
+               siu_write32(add, *ptr);
+
+       ptr = fw->pram1;
+       add = info->pram + (0x0100 / sizeof(u32));
+       for (cnt = 0; cnt < PRAM1_SIZE; cnt++, add++, ptr++)
+               siu_write32(add, *ptr);
+
+       /* XRAM initialization */
+       add = info->xram;
+       for (cnt = 0; cnt < XRAM0_SIZE + XRAM1_SIZE + XRAM2_SIZE; cnt++, add++)
+               siu_write32(add, 0);
+
+       /* YRAM variable area initialization */
+       add = info->yram;
+       for (cnt = 0; cnt < YRAM_DEF_SIZE; cnt++, add++)
+               siu_write32(add, ydef[cnt]);
+
+       /* YRAM FIR coefficient area initialization */
+       add = info->yram + (0x0200 / sizeof(u32));
+       for (cnt = 0; cnt < YRAM_FIR_SIZE; cnt++, add++)
+               siu_write32(add, fw->yram_fir_coeff[cnt]);
+
+       /* YRAM IIR coefficient area initialization */
+       add = info->yram + (0x0600 / sizeof(u32));
+       for (cnt = 0; cnt < YRAM_IIR_SIZE; cnt++, add++)
+               siu_write32(add, 0);
+
+       siu_write32(base + SIU_TRDAT, port_info->trdat);
+       port_info->trdat = 0x0;
+
+
+       /* SPB start condition: software */
+       siu_write32(base + SIU_SBACTIV, 0);
+       /* Start SPB */
+       siu_write32(base + SIU_SBCTL, 0xc0000000);
+       /* Wait for program to halt */
+       cnt = 0x10000;
+       while (--cnt && siu_read32(base + SIU_SBCTL) != 0x80000000)
+               cpu_relax();
+
+       if (!cnt)
+               return -EBUSY;
+
+       /* SPB program start address setting */
+       siu_write32(base + SIU_SBPSET, 0x00400000);
+       /* SPB hardware start(FIFOCTL source) */
+       siu_write32(base + SIU_SBACTIV, 0xc0000000);
+
+       return 0;
+}
+
+static void siu_dai_spbstop(struct siu_port *port_info)
+{
+       struct siu_info *info = siu_i2s_data;
+       u32 __iomem *base = info->reg;
+
+       siu_write32(base + SIU_SBACTIV, 0);
+       /* SPB stop */
+       siu_write32(base + SIU_SBCTL, 0);
+
+       port_info->stfifo = 0;
+}
+
+/*             API functions           */
+
+/* Playback and capture hardware properties are identical */
+static struct snd_pcm_hardware siu_dai_pcm_hw = {
+       .info                   = SNDRV_PCM_INFO_INTERLEAVED,
+       .formats                = SNDRV_PCM_FMTBIT_S16,
+       .rates                  = SNDRV_PCM_RATE_8000_48000,
+       .rate_min               = 8000,
+       .rate_max               = 48000,
+       .channels_min           = 2,
+       .channels_max           = 2,
+       .buffer_bytes_max       = SIU_BUFFER_BYTES_MAX,
+       .period_bytes_min       = SIU_PERIOD_BYTES_MIN,
+       .period_bytes_max       = SIU_PERIOD_BYTES_MAX,
+       .periods_min            = SIU_PERIODS_MIN,
+       .periods_max            = SIU_PERIODS_MAX,
+};
+
+static int siu_dai_info_volume(struct snd_kcontrol *kctrl,
+                              struct snd_ctl_elem_info *uinfo)
+{
+       struct siu_port *port_info = snd_kcontrol_chip(kctrl);
+
+       dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
+
+       uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+       uinfo->count = 2;
+       uinfo->value.integer.min = 0;
+       uinfo->value.integer.max = SIU_MAX_VOLUME;
+
+       return 0;
+}
+
+static int siu_dai_get_volume(struct snd_kcontrol *kctrl,
+                             struct snd_ctl_elem_value *ucontrol)
+{
+       struct siu_port *port_info = snd_kcontrol_chip(kctrl);
+       struct device *dev = port_info->pcm->card->dev;
+       u32 vol;
+
+       dev_dbg(dev, "%s\n", __func__);
+
+       switch (kctrl->private_value) {
+       case VOLUME_PLAYBACK:
+               /* Playback is always on port 0 */
+               vol = port_info->playback.volume;
+               ucontrol->value.integer.value[0] = vol & 0xffff;
+               ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
+               break;
+       case VOLUME_CAPTURE:
+               /* Capture is always on port 1 */
+               vol = port_info->capture.volume;
+               ucontrol->value.integer.value[0] = vol & 0xffff;
+               ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
+               break;
+       default:
+               dev_err(dev, "%s() invalid private_value=%ld\n",
+                       __func__, kctrl->private_value);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int siu_dai_put_volume(struct snd_kcontrol *kctrl,
+                             struct snd_ctl_elem_value *ucontrol)
+{
+       struct siu_port *port_info = snd_kcontrol_chip(kctrl);
+       struct device *dev = port_info->pcm->card->dev;
+       struct siu_info *info = siu_i2s_data;
+       u32 __iomem *base = info->reg;
+       u32 new_vol;
+       u32 cur_vol;
+
+       dev_dbg(dev, "%s\n", __func__);
+
+       if (ucontrol->value.integer.value[0] < 0 ||
+           ucontrol->value.integer.value[0] > SIU_MAX_VOLUME ||
+           ucontrol->value.integer.value[1] < 0 ||
+           ucontrol->value.integer.value[1] > SIU_MAX_VOLUME)
+               return -EINVAL;
+
+       new_vol = ucontrol->value.integer.value[0] |
+               ucontrol->value.integer.value[1] << 16;
+
+       /* See comment above - DSP firmware implementation */
+       switch (kctrl->private_value) {
+       case VOLUME_PLAYBACK:
+               /* Playback is always on port 0 */
+               cur_vol = port_info->playback.volume;
+               siu_write32(base + SIU_SBDVCA, new_vol);
+               port_info->playback.volume = new_vol;
+               break;
+       case VOLUME_CAPTURE:
+               /* Capture is always on port 1 */
+               cur_vol = port_info->capture.volume;
+               siu_write32(base + SIU_SBDVCB, new_vol);
+               port_info->capture.volume = new_vol;
+               break;
+       default:
+               dev_err(dev, "%s() invalid private_value=%ld\n",
+                       __func__, kctrl->private_value);
+               return -EINVAL;
+       }
+
+       if (cur_vol != new_vol)
+               return 1;
+
+       return 0;
+}
+
+static struct snd_kcontrol_new playback_controls = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "PCM Playback Volume",
+       .index          = 0,
+       .info           = siu_dai_info_volume,
+       .get            = siu_dai_get_volume,
+       .put            = siu_dai_put_volume,
+       .private_value  = VOLUME_PLAYBACK,
+};
+
+static struct snd_kcontrol_new capture_controls = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "PCM Capture Volume",
+       .index          = 0,
+       .info           = siu_dai_info_volume,
+       .get            = siu_dai_get_volume,
+       .put            = siu_dai_put_volume,
+       .private_value  = VOLUME_CAPTURE,
+};
+
+int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card)
+{
+       struct device *dev = card->dev;
+       struct snd_kcontrol *kctrl;
+       int ret;
+
+       *port_info = kzalloc(sizeof(**port_info), GFP_KERNEL);
+       if (!*port_info)
+               return -ENOMEM;
+
+       dev_dbg(dev, "%s: port #%d@%p\n", __func__, port, *port_info);
+
+       (*port_info)->playback.volume = DFLT_VOLUME_LEVEL;
+       (*port_info)->capture.volume = DFLT_VOLUME_LEVEL;
+
+       /*
+        * Add mixer support. The SPB is used to change the volume. Both
+        * ports use the same SPB. Therefore, we only register one
+        * control instance since it will be used by both channels.
+        * In error case we continue without controls.
+        */
+       kctrl = snd_ctl_new1(&playback_controls, *port_info);
+       ret = snd_ctl_add(card, kctrl);
+       if (ret < 0)
+               dev_err(dev,
+                       "failed to add playback controls %p port=%d err=%d\n",
+                       kctrl, port, ret);
+
+       kctrl = snd_ctl_new1(&capture_controls, *port_info);
+       ret = snd_ctl_add(card, kctrl);
+       if (ret < 0)
+               dev_err(dev,
+                       "failed to add capture controls %p port=%d err=%d\n",
+                       kctrl, port, ret);
+
+       return 0;
+}
+
+void siu_free_port(struct siu_port *port_info)
+{
+       kfree(port_info);
+}
+
+static int siu_dai_startup(struct snd_pcm_substream *substream,
+                          struct snd_soc_dai *dai)
+{
+       struct siu_info *info = snd_soc_dai_get_drvdata(dai);
+       struct snd_pcm_runtime *rt = substream->runtime;
+       struct siu_port *port_info = siu_port_info(substream);
+       int ret;
+
+       dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
+               info->port_id, port_info);
+
+       snd_soc_set_runtime_hwparams(substream, &siu_dai_pcm_hw);
+
+       ret = snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
+       if (unlikely(ret < 0))
+               return ret;
+
+       siu_dai_start(port_info);
+
+       return 0;
+}
+
+static void siu_dai_shutdown(struct snd_pcm_substream *substream,
+                            struct snd_soc_dai *dai)
+{
+       struct siu_info *info = snd_soc_dai_get_drvdata(dai);
+       struct siu_port *port_info = siu_port_info(substream);
+
+       dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
+               info->port_id, port_info);
+
+       if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+               port_info->play_cap &= ~PLAYBACK_ENABLED;
+       else
+               port_info->play_cap &= ~CAPTURE_ENABLED;
+
+       /* Stop the siu if the other stream is not using it */
+       if (!port_info->play_cap) {
+               /* during stmread or stmwrite ? */
+               if (WARN_ON(port_info->playback.rw_flg || port_info->capture.rw_flg))
+                       return;
+               siu_dai_spbstop(port_info);
+               siu_dai_stop(port_info);
+       }
+}
+
+/* PCM part of siu_dai_playback_prepare() / siu_dai_capture_prepare() */
+static int siu_dai_prepare(struct snd_pcm_substream *substream,
+                          struct snd_soc_dai *dai)
+{
+       struct siu_info *info = snd_soc_dai_get_drvdata(dai);
+       struct snd_pcm_runtime *rt = substream->runtime;
+       struct siu_port *port_info = siu_port_info(substream);
+       struct siu_stream *siu_stream;
+       int self, ret;
+
+       dev_dbg(substream->pcm->card->dev,
+               "%s: port %d, active streams %lx, %d channels\n",
+               __func__, info->port_id, port_info->play_cap, rt->channels);
+
+       if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+               self = PLAYBACK_ENABLED;
+               siu_stream = &port_info->playback;
+       } else {
+               self = CAPTURE_ENABLED;
+               siu_stream = &port_info->capture;
+       }
+
+       /* Set up the siu if not already done */
+       if (!port_info->play_cap) {
+               siu_stream->rw_flg = 0; /* stream-data transfer flag */
+
+               siu_dai_spbAselect(port_info);
+               siu_dai_spbBselect(port_info);
+
+               siu_dai_open(siu_stream);
+
+               siu_dai_pcmdatapack(siu_stream);
+
+               ret = siu_dai_spbstart(port_info);
+               if (ret < 0)
+                       goto fail;
+       } else {
+               ret = 0;
+       }
+
+       port_info->play_cap |= self;
+
+fail:
+       return ret;
+}
+
+/*
+ * SIU can set bus format to I2S / PCM / SPDIF independently for playback and
+ * capture, however, the current API sets the bus format globally for a DAI.
+ */
+static int siu_dai_set_fmt(struct snd_soc_dai *dai,
+                          unsigned int fmt)
+{
+       struct siu_info *info = snd_soc_dai_get_drvdata(dai);
+       u32 __iomem *base = info->reg;
+       u32 ifctl;
+
+       dev_dbg(dai->dev, "%s: fmt 0x%x on port %d\n",
+               __func__, fmt, info->port_id);
+
+       if (info->port_id < 0)
+               return -ENODEV;
+
+       /* Here select between I2S / PCM / SPDIF */
+       switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+       case SND_SOC_DAIFMT_I2S:
+               ifctl = siu_flags[info->port_id].playback.i2s |
+                       siu_flags[info->port_id].capture.i2s;
+               break;
+       case SND_SOC_DAIFMT_LEFT_J:
+               ifctl = siu_flags[info->port_id].playback.pcm |
+                       siu_flags[info->port_id].capture.pcm;
+               break;
+       /* SPDIF disabled - see comment at the top */
+       default:
+               return -EINVAL;
+       }
+
+       ifctl |= ~(siu_flags[info->port_id].playback.mask |
+                  siu_flags[info->port_id].capture.mask) &
+               siu_read32(base + SIU_IFCTL);
+       siu_write32(base + SIU_IFCTL, ifctl);
+
+       return 0;
+}
+
+static int siu_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+                             unsigned int freq, int dir)
+{
+       struct clk *siu_clk, *parent_clk;
+       char *siu_name, *parent_name;
+       int ret;
+
+       if (dir != SND_SOC_CLOCK_IN)
+               return -EINVAL;
+
+       dev_dbg(dai->dev, "%s: using clock %d\n", __func__, clk_id);
+
+       switch (clk_id) {
+       case SIU_CLKA_PLL:
+               siu_name = "siua_clk";
+               parent_name = "pll_clk";
+               break;
+       case SIU_CLKA_EXT:
+               siu_name = "siua_clk";
+               parent_name = "siumcka_clk";
+               break;
+       case SIU_CLKB_PLL:
+               siu_name = "siub_clk";
+               parent_name = "pll_clk";
+               break;
+       case SIU_CLKB_EXT:
+               siu_name = "siub_clk";
+               parent_name = "siumckb_clk";
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       siu_clk = clk_get(dai->dev, siu_name);
+       if (IS_ERR(siu_clk)) {
+               dev_err(dai->dev, "%s: cannot get a SIU clock: %ld\n", __func__,
+                       PTR_ERR(siu_clk));
+               return PTR_ERR(siu_clk);
+       }
+
+       parent_clk = clk_get(dai->dev, parent_name);
+       if (IS_ERR(parent_clk)) {
+               ret = PTR_ERR(parent_clk);
+               dev_err(dai->dev, "cannot get a SIU clock parent: %d\n", ret);
+               goto epclkget;
+       }
+
+       ret = clk_set_parent(siu_clk, parent_clk);
+       if (ret < 0) {
+               dev_err(dai->dev, "cannot reparent the SIU clock: %d\n", ret);
+               goto eclksetp;
+       }
+
+       ret = clk_set_rate(siu_clk, freq);
+       if (ret < 0)
+               dev_err(dai->dev, "cannot set SIU clock rate: %d\n", ret);
+
+       /* TODO: when clkdev gets reference counting we'll move these to siu_dai_shutdown() */
+eclksetp:
+       clk_put(parent_clk);
+epclkget:
+       clk_put(siu_clk);
+
+       return ret;
+}
+
+static const struct snd_soc_dai_ops siu_dai_ops = {
+       .startup        = siu_dai_startup,
+       .shutdown       = siu_dai_shutdown,
+       .prepare        = siu_dai_prepare,
+       .set_sysclk     = siu_dai_set_sysclk,
+       .set_fmt        = siu_dai_set_fmt,
+};
+
+static struct snd_soc_dai_driver siu_i2s_dai = {
+       .name   = "siu-i2s-dai",
+       .playback = {
+               .channels_min = 2,
+               .channels_max = 2,
+               .formats = SNDRV_PCM_FMTBIT_S16,
+               .rates = SNDRV_PCM_RATE_8000_48000,
+       },
+       .capture = {
+               .channels_min = 2,
+               .channels_max = 2,
+               .formats = SNDRV_PCM_FMTBIT_S16,
+               .rates = SNDRV_PCM_RATE_8000_48000,
+        },
+       .ops = &siu_dai_ops,
+};
+
+static const struct snd_soc_component_driver siu_i2s_component = {
+       .name           = "siu-i2s",
+};
+
+static int siu_probe(struct platform_device *pdev)
+{
+       const struct firmware *fw_entry;
+       struct resource *res, *region;
+       struct siu_info *info;
+       int ret;
+
+       info = kmalloc(sizeof(*info), GFP_KERNEL);
+       if (!info)
+               return -ENOMEM;
+       siu_i2s_data = info;
+       info->dev = &pdev->dev;
+
+       ret = request_firmware(&fw_entry, "siu_spb.bin", &pdev->dev);
+       if (ret)
+               goto ereqfw;
+
+       /*
+        * Loaded firmware is "const" - read only, but we have to modify it in
+        * snd_siu_sh7343_spbAselect() and snd_siu_sh7343_spbBselect()
+        */
+       memcpy(&info->fw, fw_entry->data, fw_entry->size);
+
+       release_firmware(fw_entry);
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               ret = -ENODEV;
+               goto egetres;
+       }
+
+       region = request_mem_region(res->start, resource_size(res),
+                                   pdev->name);
+       if (!region) {
+               dev_err(&pdev->dev, "SIU region already claimed\n");
+               ret = -EBUSY;
+               goto ereqmemreg;
+       }
+
+       ret = -ENOMEM;
+       info->pram = ioremap(res->start, PRAM_SIZE);
+       if (!info->pram)
+               goto emappram;
+       info->xram = ioremap(res->start + XRAM_OFFSET, XRAM_SIZE);
+       if (!info->xram)
+               goto emapxram;
+       info->yram = ioremap(res->start + YRAM_OFFSET, YRAM_SIZE);
+       if (!info->yram)
+               goto emapyram;
+       info->reg = ioremap(res->start + REG_OFFSET, resource_size(res) -
+                           REG_OFFSET);
+       if (!info->reg)
+               goto emapreg;
+
+       dev_set_drvdata(&pdev->dev, info);
+
+       /* register using ARRAY version so we can keep dai name */
+       ret = snd_soc_register_component(&pdev->dev, &siu_i2s_component,
+                                        &siu_i2s_dai, 1);
+       if (ret < 0)
+               goto edaiinit;
+
+       ret = snd_soc_register_platform(&pdev->dev, &siu_platform);
+       if (ret < 0)
+               goto esocregp;
+
+       pm_runtime_enable(&pdev->dev);
+
+       return ret;
+
+esocregp:
+       snd_soc_unregister_component(&pdev->dev);
+edaiinit:
+       iounmap(info->reg);
+emapreg:
+       iounmap(info->yram);
+emapyram:
+       iounmap(info->xram);
+emapxram:
+       iounmap(info->pram);
+emappram:
+       release_mem_region(res->start, resource_size(res));
+ereqmemreg:
+egetres:
+ereqfw:
+       kfree(info);
+
+       return ret;
+}
+
+static int siu_remove(struct platform_device *pdev)
+{
+       struct siu_info *info = dev_get_drvdata(&pdev->dev);
+       struct resource *res;
+
+       pm_runtime_disable(&pdev->dev);
+
+       snd_soc_unregister_platform(&pdev->dev);
+       snd_soc_unregister_component(&pdev->dev);
+
+       iounmap(info->reg);
+       iounmap(info->yram);
+       iounmap(info->xram);
+       iounmap(info->pram);
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (res)
+               release_mem_region(res->start, resource_size(res));
+       kfree(info);
+
+       return 0;
+}
+
+static struct platform_driver siu_driver = {
+       .driver         = {
+               .name   = "siu-pcm-audio",
+       },
+       .probe          = siu_probe,
+       .remove         = siu_remove,
+};
+
+module_platform_driver(siu_driver);
+
+MODULE_AUTHOR("Carlos Munoz <carlos@kenati.com>");
+MODULE_DESCRIPTION("ALSA SoC SH7722 SIU driver");
+MODULE_LICENSE("GPL");