Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / sound / soc / omap / Kconfig

diff --git a/kernel/sound/soc/omap/Kconfig b/kernel/sound/soc/omap/Kconfig
new file mode 100644 (file)
index 0000000..6768e4f
--- /dev/null
+++ b/kernel/sound/soc/omap/Kconfig
@@ -0,0 +1,123 @@
+config SND_OMAP_SOC
+       tristate "SoC Audio for the Texas Instruments OMAP chips"
+       depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST)
+       select SND_DMAENGINE_PCM
+
+config SND_OMAP_SOC_DMIC
+       tristate
+
+config SND_OMAP_SOC_MCBSP
+       tristate
+
+config SND_OMAP_SOC_MCPDM
+       tristate
+
+config SND_OMAP_SOC_HDMI_AUDIO
+       tristate "HDMI audio support for OMAP4+ based SoCs"
+       depends on SND_OMAP_SOC
+       help
+         For HDMI audio to work OMAPDSS HDMI support should be
+         enabled.
+         The hdmi audio driver implements cpu-dai component using the
+         callbacks provided by OMAPDSS and registers the component
+         under DSS HDMI device. Omap-pcm is registered for platform
+         component also under DSS HDMI device. Dummy codec is used as
+         as codec component. The hdmi audio driver implements also
+         the card and registers it under its own platform device.
+         The device for the dirver is registered by OMAPDSS hdmi
+         driver.
+
+config SND_OMAP_SOC_N810
+       tristate "SoC Audio support for Nokia N810"
+       depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
+       depends on OMAP_MUX
+       select SND_OMAP_SOC_MCBSP
+       select SND_SOC_TLV320AIC3X
+       help
+         Say Y if you want to add support for SoC audio on Nokia N810.
+
+config SND_OMAP_SOC_RX51
+       tristate "SoC Audio support for Nokia N900 (RX-51)"
+       depends on SND_OMAP_SOC && ARM && I2C
+       select SND_OMAP_SOC_MCBSP
+       select SND_SOC_TLV320AIC3X
+       select SND_SOC_TPA6130A2
+       depends on GPIOLIB
+       help
+         Say Y if you want to add support for SoC audio on Nokia N900
+         cellphone.
+
+config SND_OMAP_SOC_AMS_DELTA
+       tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
+       depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY
+       select SND_OMAP_SOC_MCBSP
+       select SND_SOC_CX20442
+       help
+         Say Y  if you want to add support  for SoC audio device  connected to
+         a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
+
+         Note that in order to get those devices fully supported,  you have to
+         build  the kernel  with  standard  serial port  driver  included  and
+         configured for at least 4 ports.  Then, from userspace, you must load
+         a line discipline #19 on the modem (ttyS3) serial line.  The simplest
+         way to achieve this is to install util-linux-ng  and use the included
+         ldattach  utility.  This  can be  started  automatically  from  udev,
+         a simple rule like this one should do the trick (it does for me):
+               ACTION=="add", KERNEL=="controlC0", \
+                               RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
+
+config SND_OMAP_SOC_OSK5912
+       tristate "SoC Audio support for omap osk5912"
+       depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
+       select SND_OMAP_SOC_MCBSP
+       select SND_SOC_TLV320AIC23_I2C
+       help
+         Say Y if you want to add support for SoC audio on osk5912.
+
+config SND_OMAP_SOC_AM3517EVM
+       tristate "SoC Audio support for OMAP3517 / AM3517 EVM"
+       depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C
+       select SND_OMAP_SOC_MCBSP
+       select SND_SOC_TLV320AIC23_I2C
+       help
+         Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517
+         EVM.
+
+config SND_OMAP_SOC_OMAP_TWL4030
+       tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
+       depends on TWL4030_CORE && SND_OMAP_SOC
+       select SND_OMAP_SOC_MCBSP
+       select SND_SOC_TWL4030
+       help
+         Say Y if you want to add support for SoC audio on TI SoC based boards
+         using twl4030 as c codec. This driver currently supports:
+         - Beagleboard or Devkit8000
+         - Gumstix Overo or CompuLab CM-T35/CM-T3730
+         - IGEP v2
+         - OMAP3EVM
+         - SDP3430
+         - Zoom2
+
+config SND_OMAP_SOC_OMAP_ABE_TWL6040
+       tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
+       depends on TWL6040_CORE && SND_OMAP_SOC && (ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST)
+       select SND_OMAP_SOC_DMIC
+       select SND_OMAP_SOC_MCPDM
+       select SND_SOC_TWL6040
+       select SND_SOC_DMIC
+       select COMMON_CLK_PALMAS if MFD_PALMAS
+       help
+         Say Y if you want to add support for SoC audio on OMAP boards using
+         ABE and twl6040 codec. This driver currently supports:
+         - SDP4430/Blaze boards
+         - PandaBoard (4430)
+         - PandaBoardES (4460)
+         - omap5-uevm (5432)
+
+config SND_OMAP_SOC_OMAP3_PANDORA
+       tristate "SoC Audio support for OMAP3 Pandora"
+       depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
+       select SND_OMAP_SOC_MCBSP
+       select SND_SOC_TWL4030
+       help
+         Say Y if you want to add support for SoC audio on the OMAP3 Pandora.